square wheels

Smooth Rides on Square Wheels

Stacy Hoehn Fonstad

Vanderbilt University

October 4, 2011

Stacy Hoehn Fonstad Vanderbilt University

Introduction

Why does a bicycle with round wheels roll smoothly on a flat road?

As the wheel rolls, the center of the wheel stays at a constantheight, allowing the bicycle to ride smoothly.

Introduction

What about for a Square Wheel?

As the square wheel rolls across a flat surface, the center of thesquare changes elevation. To compensate for these elevationchanges and to smooth the ride, the road’s surface needs to beuneven.

Reinventing the Road

A series of these “bumps” forms a road that a square can rollsmoothly on.

How do we determine the exact shape of these “bumps”?

Reinventing the Road

A series of these “bumps” forms a road that a square can rollsmoothly on.

How do we determine the exact shape of these “bumps”?

Determining the Shape of the “Bumps”

Design Criteria:

I The center of the wheel must stay at a constant height d .I The wheel must be tangent to the road’s surface at the point

of contact.I The center of the wheel should be directly above the point of

contact with the road’s surface.I The distance along the surface of the “bump” must equal the

length of one side of the square.

Design Criteria:I The center of the wheel must stay at a constant height d .

I The wheel must be tangent to the road’s surface at the pointof contact.

I The center of the wheel should be directly above the point ofcontact with the road’s surface.

I The distance along the surface of the “bump” must equal thelength of one side of the square.

Design Criteria:I The center of the wheel must stay at a constant height d .I The wheel must be tangent to the road’s surface at the point

of contact.

I The center of the wheel should be directly above the point ofcontact with the road’s surface.

contact with the road’s surface.

contact with the road’s surface.I The distance along the surface of the “bump” must equal the

length of one side of the square.

The Geometry Behind the Shape

a = (d − y) cos(θ)

a = (d − y) cos(θ) = (d − y)1√

1 +(dydx

)2Stacy Hoehn Fonstad Vanderbilt University

Calculus

Solve for dydx :

√(d − y

Separate the x ’s from the y ’s:

1√(d−ya

)2− 1

dy = dx

Integrate both sides:∫1√(

d−ya

)2− 1

Calculus

Solve for dydx :

√(d − y

1√(d−ya

)2− 1

dy = dx

d−ya

)2− 1

Calculus

Solve for dydx :

√(d − y

1√(d−ya

)2− 1

dy = dx

d−ya

)2− 1

Calculus (continued)

∫1√(

d−ya

)2− 1

∫−a√u2 − 1

∫dx , where u =

d − y

What is an antiderivative of g(u) = 1√u2−1?

G (u) = cosh−1(u) (inverse hyperbolic cosine)!!

∫1√(

d−ya

)2− 1

∫dx∫

−a√u2 − 1

∫dx , where u =

d − y

∫1√(

d−ya

)2− 1

∫dx∫

−a√u2 − 1

∫dx , where u =

d − y

∫1√(

d−ya

)2− 1

∫dx∫

−a√u2 − 1

∫dx , where u =

d − y

Solving for y , we get that y = d − a cosh( xa + c), where c is someconstant.

Initial Value: y(0) = d − a, so c = 0. Thus, y = d − a cosh( xa ).(This type of curve is called an inverted catenary.)

Example:

For example, if the wheel is a square with sides of length 2, a = 1and d =

Thus, y =√

2− cosh(x).

Example:

For example, if the wheel is a square with sides of length 2, a = 1and d =

Thus, y =√

2− cosh(x).

How Much of the Graph Do We Need to Use?

Because of how we set up this problem, we only need to use theportion of the graph lying above the x-axis (i.e. the portion of thegraph with −b ≤ x ≤ b, where b = cosh−1(

√2) ≈ 0.8814) and

repeat it.

Remarks:

I The arclength of y =√

2− cosh(x) from x = −b to x = bequals 2, which is the length of a single side of the square.

I The slope of the graph of y =√

2− cosh(x) at x = b is 1,and the slope at x = −b is -1, so the angle between twoconsecutive “bumps” of the road is 90◦.

√2) ≈ 0.8814) and

repeat it.

Remarks:I The arclength of y =

√2− cosh(x) from x = −b to x = b

equals 2, which is the length of a single side of the square.

I The slope of the graph of y =√

2− cosh(x) at x = b is 1,and the slope at x = −b is -1, so the angle between twoconsecutive “bumps” of the road is 90◦.

√2) ≈ 0.8814) and

repeat it.

Remarks:I The arclength of y =

√2− cosh(x) from x = −b to x = b

equals 2, which is the length of a single side of the square.I The slope of the graph of y =

√2− cosh(x) at x = b is 1,

and the slope at x = −b is -1, so the angle between twoconsecutive “bumps” of the road is 90◦.

Squares on a Roll

Mathematica Demonstration

Figure 1: Macalester College Figure 2: St. Norbert College

Texas A & M Video

Squares on a Roll

Mathematica Demonstration

Figure 1: Macalester College Figure 2: St. Norbert College

Texas A & M Video

Hyperbolic Functions and Catenaries

The hyperbolic cosine function y = cosh(x) = ex+e−x

2 seeminglyappeared out of nowhere in this application, but catenary functionsactually appear in many natural settings and applications.

A catenary is the shape you get when you let a chain or a stringhang freely between two endpoints.

Hyperbolic Functions and Catenaries

The hyperbolic cosine function y = cosh(x) = ex+e−x

2 seeminglyappeared out of nowhere in this application, but catenary functionsactually appear in many natural settings and applications.

A catenary is the shape you get when you let a chain or a stringhang freely between two endpoints.

Catenaries (continued)

I Pyramids: There is evidence that ancient Egyptians mighthave used tracks of wood cut into quarter-circles (whoseshapes are very close to those of inverted catenary curves) tomove large blocks of stone for the pyramids.

I Arches: Inverted catenaries y = d − a cosh( xa ) form thestrongest arches.

The Gateway Arch is actually a weighted catenary of the formy = d − b cosh( xa ) because it is narrower at the top than atits base. Its shape corresponds to the shape that a weightedchain, having lighter links in the middle, would form.

What about Other Regular Polygons?

I The same procedure that we used for a square will work forany regular polygon (except for a triangle!)

I Instead of d =√

2a, now d = acos(π/n) , where n is the number

of sides of the polygon.I As the number of sides of the polygon increases, the bumps

on the catenary road will become flatter and flatter.

I Instead of d =√

of sides of the polygon.

I As the number of sides of the polygon increases, the bumpson the catenary road will become flatter and flatter.

I Instead of d =√

Other Things to Try

I Given some other wheel shape, can we figure out the shape ofthe corresponding road?

I Given a road shape, can we find a wheel that will ridesmoothly over that road?

Other Things to Try

I Given some other wheel shape, can we figure out the shape ofthe corresponding road?

I Given a road shape, can we find a wheel that will ridesmoothly over that road?

A Few References

I Leon Hall and Stan Wagon. “Roads and Wheels.”Mathematics Magazine, Vol. 65, No. 5 (Dec., 1992), pp.283-301.

I G.B. Robison. “Rockers and Rollers.” Mathematics Magazine,Vol. 33 (1960), pp. 139-144.

square wheels

Documents

wheels you can trust - alcoa ® wheels | alcoa...

servicing single-piece and multi-piece wheels wheels wheels...

power india wheels co., ernakulam, car alloy wheels

accuride wheels - wheels now home | wheels now inc. ·...

car alloy wheels | alloy wheels price | neo alloy wheels

wheels within wheels ezekiels merkabah william blake

aluminum umbrellas -...

tires & wheels - wheels – lifts – auto accessories

luxury fif th wheels h wheels th wheels

mag wheels | car alloy wheels | alloy wheels

wheels within wheels-ah

servicing single-piece and multi-piece wheels wheels ... ·...

square wheels - susan's engagement of the boss and her team...

everest manufacturers - indiamart · forklift wheels,...

square wheels - exploratorium

tractor domestic wheels - steel strips wheels …...tractor...

wheels within wheels · 2019. 1. 29. · wheels within...

car show @ park square downtown fruita, co wheels west car...

square wheels: electronic medical records for discovery...

fifth wheels fifth wheelsffifth wheelsifth wheels