sph prusa i3 mkii multi material manual · using prusa control marvin breuch 06.02.2018 1 sph prusa...

||

Using Prusa Control

06.02.2018Marvin Breuch 1

SPH Prusa i3 MKII Multi Material Manual

|| 06.02.2018Marvin Breuch 2

Prusa i3 MKII

When 3D modelling be aware to create indepentent bodies.

|| 06.02.2018Marvin Breuch 3

Prusa i3 MKII

Export each body as an induvidual .stl

|| 06.02.2018Marvin Breuch 4

Prusa i3 MKII

Open the Prusa Control Software as you would normaly do.

|| 06.02.2018Marvin Breuch 5

Prusa i3 MKII

Navigate to the Settings tab and then choose PrusaControl

settings.

|| 06.02.2018Marvin Breuch 6

Prusa i3 MKII

Now choose the MM version as your Printer model and choose

a 0.4mm Nozzle. Confirm by pressing ok.

|| 06.02.2018Marvin Breuch 7

Prusa i3 MKII

If you want to print in a single material use this option and

proceed like you usually do.

|| 06.02.2018Marvin Breuch 8

Prusa i3 MKII

Under File select «Import multipart model file». This is really

important for your print to succeed.

|| 06.02.2018Marvin Breuch 9

Prusa i3 MKII

Select ALL your different .stl files.

|| 06.02.2018Marvin Breuch 10

Prusa i3 MKII

The software will do all the work for you. Including adding a Dirt

Tower in the background. You can still change the extruder for

each part by clicking on it and using the options on the right.

|| 06.02.2018Marvin Breuch 11

Prusa i3 MKII

From here on proceed as you would do with the single material

printer. Have fun :)