solutions for optical fibre · product catalogue networks. solutions for optical fibres are fibres...
Post on 21-Jul-2020
12 Views
Preview:
TRANSCRIPT
3M TelecommunicationsSolutions for Networks
Optical Fibre
Solutions for
Telecommunications
Product Catalogue
Networks
Solutions for
Optical fibres are fibres made of glass which transport a signal containing several types of information at very high speeds in the form of pulses of light.
This technology allows very high data flows to be achieved, up to several tens of Gigabits/second.
The use of optical fibre technology allows networks to be fed over long distances with minimum losses. It also offers the advantage of being insensitive to electromagnetic interference.
3M offer fibre optic solutions for the main types of networks for the long- and short-distance markets:
FTTH : With its extensive experience in FTTH, 3M offers a complete solution from the fibre optic node (exchange) up to the subscriber point (interior distribution device).
LAN : The equivalent of the VDI product for copper with RJ45 Keystone jacks, 3M lists a full fibreoptics range for your LAN networks.
Security Video : 3M offers solutions to meet the installation needs of your Security Video systems. The products can be installed quickly and are easy to use.
DATACENTER : 3M offers solutions for Meet Me Room (Copper and Fibre).
FibreOptics
3
FTTX Solutions
Content
Page
Description of the FTTH Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9 Optical Node . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Transport network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 FTTH access and distribution network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Distribution solutions for buildings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Summary table of splice protection enclosures . . . . . . . . . . . . . . . . . . . 8-9
1 Exchange Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13 RFO NG Optical Distribution Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11 MODF 19’’ Optical Distribution Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
2 Transport Access Network Solution . . . . . . . . . . . . . . . . . . . . . . . 14-18 BPEO Size 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 BPEO Size 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16 BPEO Size 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18
3 Distribution Access Network Solutions . . . . . . . . . . . . . . . . . 19-23
3.1 Underground distribution network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-23 BPEO Size 1,5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20 BPEO Size 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22 µQODC (Quick Optic Derivation Closure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
3.2 Under- and above ground distribution network. . . . . . . . . . 24-26 BPEO Size 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25 OSSC-OSLC-OSC30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
3.3 Wall and Pole distribution network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28 PBO Size 1 NG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 FTB (Fibre Terminal Box). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
4
Fibre optic Solutions
Page
4 Solutions for Building Distribution . . . . . . . . . . . . . . . . . . . . . . . . . .29-37
4.1 Building Entry Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30 PBO Size 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 eDB² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
4.2 Building Floor Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32 PBPO 24 NG Symetric. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 PBPO/C NG Symetric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
4.3 Solutions for Living Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-35 Wall Outlet 4 Fibres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-34 Wall Outlet 2 Fibres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
4.4 FTTH Wall Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37 3M™ 8686 FTTH Wall Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 3M™ VOL-0256-C FTTH Wall Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
5 FTTH Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-47
5.1 NPC Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39 3M™ No Polish Connectors (NPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39 3M™ No Polish Connector Termination Kit 8865
and 8865-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 3M™ Angle Splicing Kit 2565 for NPC Connectors
and Fibrlok Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
5.2 Crimplok + Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41 3M™ Crimplok + Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 3M™ Crimplok + Terminations Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
5.3 Fibrlok™ Mechanical Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 3M™ Fibrlok™ Mechanical Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
5.4 Fibrlok™ Indoor FRP Splice Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 3M™ 2569 Indoor FRP Splice Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
5.5 3M™ One Pass Mini Fibre Pathway LSZH . . . . . . . . . . . . . . . . . . . 44-47 3M™ One Pass Mini Fibre Pathway Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 3M™ One Pass Mini Fibre Pathway Product Accessories . . . . . . .47
5
FTTX Solutions
Description of the FTTH Network
ON (Optical Node)
The ON is the location which houses the active components for transmission and switching and which acts as the interface between the collection and access networks. Optical distribution systems are available for open frames or for 19" racks. The choice between these two installation options mainly depends on the size of the location. For a large, shelter-type location the RFO NG solution on open frames is more suitable for more fl exibility during patching. For smaller locations, the MODF solution for 19” racks is the most suitable since it is more compact.
Transport network
The transport network, also known as the access network, routes the fi bres from the access node to the street cabinet. High capacity fi bre optic cables and splice protection enclosure are used for this part of the network.
3M offers a full range of splice protection enclosures. There are four criteria of selection:
- Network confi guration: It is essential to know, whether confi guration is of MID SPAN, STRAIGHT JOINT, DERIVATION PONT or DISTRIBUTION TYPE.The type of confi guration involved will determine the front face of the housing.
- The environment: This criteria determines the necessary IP (Protection class) for the housings. Locations with direct water exposure may need a higher IP class.
- The capacity: This relates to the number and type of splices at the point of connection
- The cables: This relates to cable characteristics such as the diameter, the number of fi bres and the structure.
The 3M range of splice protection units for the transport network
BPEO Size 4 BPEO Size 3 BPEO Size 2
Fibre capacity 864 576 336
Range cable diameter* (mm) 4 to 27 4 to 27 4 to 27
Volume (L) 57.9 23.8 17.3
IP Protection class IP 68 IP 68 IP 68
* Depending on the confi guration (transit or break out). Please refer to the product page for further information.
RFO NG solution for frames MODF solution for 19” racks
6
Fibre optic Solutions
Description of the FTTH Network
FTTH access and distribution network
The access and distribution network includes the section from the street cabinet up to the the fi bre optic distribution point (DP). The street cabinet is a point where the building operator provides other operators with access to the lines. The fi bre optic distribution point (DP) is the node in the access network architecture from which clients are connected. Closures protect the jointing points of cables between these two network locations.
Distribution solution for buildings
Connections in buildings are the fi nal stage in an FTTH network. Fibres located at the base of a building are distributed and fi nally connected to subscribers.
There are two types of architecture:
BPEO Size 1.5 BPEO Size 1 BPEO Size 0 µQODC PBO NG
Fibre capacity 144 144 48 24 48
Range cable diameter* (mm) 3 to 18 3 to 20 3 to 18 4.2 to 11
Volume (L) 5.6 4.8 < 2 1.4 n.a*
IP Protection index IP 68 IP 68 IP 68 IP 68 IP 44
* Depending on the confi guration (input or output). Please refer to the product page for further information.
PBO T2 V2 eDB² PBPO 24 NG Symmetric
PBPO/CNG Symmetric Wall Outlet
Fibre capacity 144 48 48 48 4
Application Building basement Building basement Floor Floor Inside Living Unit
Type of housing SpliceSuitable for connectors
SpliceSuitable for connectors
Suitable for connectors
"Direct Drop" architecture (1)An architecture is said to be "direct drop" when at fl oor landings there are no fi bre boxes provided between the Interior Optical Termination in the communications board for each of the dwellings and the operators services location (or room) at the base of the building. In this case an individual "drop" cable links each dwelling to the operators' services location (or room).
"Riser cable" architecture (2)An architecture is said to be a "riser cable" architecture when at fl oor landings, there are fl oor boxes provided between the Interior Optical Termination in the communications board for each of the dwellings and the operators services location (or room) at the base of the building. In this case a riser cable links the operators' services location (or room) to all the boxes on a fl oor landing.
Boîtier de distribution de palierTous les 1 à 2 étagesPBPO 12/24
Kit de prise pré-câblée 4FO
Kit de prise pré-câblée 4FO
Kit de prise pré-câblée 4FO
Câble de distribution verticale ou câble "riser"
Adduction de l'immeuble
Kit de raccordement terrain FibrlokTM
Kit de raccordement terrain FibrlokTM
Pied d'immeuble / Point de distributionPBPO 12/24
Prise terminale client
Prise terminale client
Prise terminale client
Câble de branchement d'abonné
Adduction de l'immeuble
Kit de raccordement terrain FibrlokTM
Pied d'immeublePBO T2
7
FTTX Solutions
Summary table of splice protection enclosures
Splice protection enclosure Cable entry kit Splice protection housing Cassettes Wall
support
Description Reference Number Description Max No. of cable
entries Reference Number Description Reference
NumberMax No. of. cassettes Compatibility Reference
Number
BPEO Size 0 4-slot N501741A
ECAM Body Double D6 - 18 (from 6 to 18 mm)Cable Entry Kit for D6 - 18 - from 6 to 9 mmCable Entry Kit for D6 - 18 - from 9 to 12 mmCable Entry Kit for D6 - 18 - from 12 to 15 mmCable Entry Kit for D6 - 18 - from 15 to 18 mm
ECAM Single S3 - 7 (from 3 to 7 mm)ECAM Single S3.5 - 9.5 (from 3.5 to 9.5 mm)
1----
122
N721162AN721163AN721164AN721165AN721166A
N721171AN721172A
BPEO Size 0 4-slot N501741A 4 x cassettes 1-step2 x cassettes 2-step All part numbers
Support molded into the housing
base
BPEO Size 1 EOC 12-slot N501487A ECAM Single EVOL S5 - 18 (from 5 to 18 mm) 4 N530129A BPEO Size 1 EOC 12-slot N501487A 12 x cassettes 1-step
6 x cassettes 2-step All part numbers N711599A
BPEO Size 1 EVOL CDP 12-slot N501488A ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)12
N721130AN530129A
BPEO Size 1 EVOL CDP 12-slot N501488A 12 x cassettes 1-step
6 x cassettes 2-step All part numbers N711599A
BPEO Size 1 EVOL EDP 12-slot N501489A ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)14
N721130AN530128A
BPEO Size 1 EVOL EDP 12-slot N501489A 12 x cassettes 1-step
6 x cassettes 2-step All part numbers N711599A
BPEO Size 1 EVOL FDP BRANCH12-slot N501719A
ECAM Body Double D6 - 18 (from 6 to 18 mm)Cable Entry Kit for D6 - 18 - from 6 to 9 mmCable Entry Kit for D6 - 18 - from 9 to 12 mmCable Entry Kit for D6 - 18 - from 12 to 15 mmCable Entry Kit for D6 - 18 - from 15 to 18 mm
ECAM Single S3.5 - 9.5 (from 3.5 to 9.5 mm)
1----
10
N721162AN721163AN721164AN721165AN721166A
N721172A
BPEO Size 1 EVOL FDP BRANCH 12-slot N501719A 12 x cassettes 1-step
6 x cassettes 2-step All part numbers N711599A
BPEO Size 1 EVOL FDP DROP12-slot N501714A
ECAM Body Double D6 - 18 (from 6 to 18 mm)Cable Entry Kit for D6 - 18 - from 6 to 9 mmCable Entry Kit for D6 - 18 - from 9 to 12 mmCable Entry Kit for D6 - 18 - from 12 to 15 mmCable Entry Kit for D6 - 18 - from 15 to 18 mm
ECAM Single S3 - 7 (from 3 to 7 mm)
1----
16
N721162AN721163AN721164AN721165AN721166A
N721171A
BPEO Size 1 EVOL FDP DROP 12-slot N501714A 12 x cassettes 1-step
6 x cassettes 2-step All part numbers N711599A
BPEO Size 1.5 EVOL FDP BRANCH 12-slot N501747A
ECAM Body Double D6 - 18 (from 6 to 18 mm)Cable Entry Kit for D6 - 18 - from 6 to 9 mmCable Entry Kit for D6 - 18 - from 9 to 12 mmCable Entry Kit for D6 - 18 - from 12 to 15 mmCable Entry Kit for D6 - 18 - from 15 to 18 mm
ECAM Single S3.5 - 9.5 (from 3.5 to 9.5 mm) ECAM Single S5 - 18 (from 5 to 18 mm)
1----
132
N721162AN721163AN721164AN721165AN721166A
N721172AN530129A
BPEO Size 1.5 EVOL FDP BRANCH 12-slot
N501747A 12 x cassettes 1-step6 x cassettes 2-step All part numbers
Support built into the body of the housing
BPEO Size 1.5 EVOL FDP DROP 12-slot N501751A
ECAM Body Double D6 - 18 (from 6 to 18 mm)Cable Entry Kit for D6 - 18 - from 6 to 9 mmCable Entry Kit for D6 - 18 - from 9 to 12 mmCable Entry Kit for D6 - 18 - from 12 to 15 mmCable Entry Kit for D6 - 18 - from 15 to 18 mm
ECAM Single S3 - 7 (from 3 to 7 mm)ECAM Single S4 - 12 (from 4 to 12 mm)
1----
252
N721162AN721163AN721164AN721165AN721166A
N721171AN530128A
BPEO Size 1.5 EVOL FDP DROP 12-slot N501751A 12 x cassettes 1-step
6 x cassettes 2-step All part numbersSupport built into the body of the housing
BPEO Size 2 EVOL CDP 28-slot N501491A ECAM Double D5 - 27 (from 5 to 27 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)16
N721131AN530129A
BPEO Size 2 EVOL CDP28-slot N501491A 28 x cassettes 1-step
14 x cassettes 2-step All part numbers N711600A
BPEO Size 2 EVOL EDP28-slot N501492A
ECAM Double D5 - 27 (from 5 to 27 mm)ECAM Single S4 - 12 (from 4 to 12 mm)ECAM Single S5 - 18 (from 5 to 18 mm)
1102
N721131AN530128AN530129A
BPEO Size 2 EVOL EDP28-slot N501492A 28 x cassettes 1-step
14 x cassettes 2-step All part numbers N711600A
BPEO Size 2 EVOL BDP28-slot N501493A ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)116
N721130AN530128A
BPEO Size 2 EVOL BDP28-step N501493A 28 x cassettes 1-step
14 x cassettes 2 Step All part numbers N711600A
BPEO Size 3 EVOL CDP 48-slot N501494A ECAM Double D5 - 27 (from 5 to 27 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)16
N721131AN530129A
BPEO Size 3 EVOL CDP 48-slot N501494A 48 x cassettes 1-step
24 x cassettes 2 Step All part numbers N711600A
BPEO Size 3 EVOL EDP48-slot N501495A
ECAM Double D5 - 27 (from 5 to 27 mm)ECAM Single S4 - 12 (from 4 to 12 mm)ECAM Single S5 - 18 (from 5 to 18 mm)
1102
N721131AN530128AN530129A
BPEO Size 3 EVOL EDP48-step N501495A 48 x cassettes 1-step
24 x cassettes 2-step All part numbers N711600A
BPEO Size 3 EVOL BDP48-slot N501496A ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)116
N721130AN530128A
BPEO Size 3 EVOL BDP48-step N501496A 48 x cassettes 1-step
24 x cassettes 2-step All part numbers N711600A
BPEO Size 4 72-slot N501675A ECAM Double D5 - 27 (from 4 to 27 mm)
ECAM Single S4 - 27 (from 4 to 27 mm)15
N501790AN501791A
BPEO Size 4 72-slot N501675A 72 x cassettes 1-step
36 x cassettes 2-step All part numbers N711660A
8
Fibre optic Solutions
Description Cassettes FO G652 / G657
Number of slots
Reference Number
K7 - 1 support 12 x fusion splices 1 N541106A
K7 - 1 support 2 x 6 fusion splices 1 N541182A
K7 - 1 support 9 x fusion splices and 1 x splitter 1 N541113A
K7 - 1 support 6 x Fibrlok™ 2540G 1 N541103A
K7 - 1 support and 2 splitters x 6 fusion splices 1 N541155A
K7 - 2 supports 12 x fusion splices or 12 Fibrolk 2540G 2 N541121A
K7 - 2 supports 12 x fusion splices and 1 x splitter 2 N541104A
K7 - 2 supports 24 x fusion splices and 1 x splitter 2 N541151A
K7 - 2 supports 12 x Fibrlok™ 2540G 2 N541108A
K7 - 2 supports 10 x Fibrlok™ 2540G and 1 x splitter 2 N541110A
To obtain the number of cassettes for a given type of closure simply read the number of slots that the organiser contains and the number of slots occupied by a cassette.
Example: BPEO S1 is a 12-slot organiser 12 x 12 fusion cassettes (541106) can be housed or 6 x 12 Fibrlok™ 2540G cassettes (541108).
Splice protection enclosure Cable entry kit Splice protection housing Cassettes Wall
support
Description Reference Number Description Max No. of cable
entries Reference Number Description Reference
NumberMax No. of. cassettes Compatibility Reference
Number
BPEO Size 0 4-slot N501741A
ECAM Body Double D6 - 18 (from 6 to 18 mm)Cable Entry Kit for D6 - 18 - from 6 to 9 mmCable Entry Kit for D6 - 18 - from 9 to 12 mmCable Entry Kit for D6 - 18 - from 12 to 15 mmCable Entry Kit for D6 - 18 - from 15 to 18 mm
ECAM Single S3 - 7 (from 3 to 7 mm)ECAM Single S3.5 - 9.5 (from 3.5 to 9.5 mm)
1----
122
N721162AN721163AN721164AN721165AN721166A
N721171AN721172A
BPEO Size 0 4-slot N501741A 4 x cassettes 1-step2 x cassettes 2-step All part numbers
Support molded into the housing
base
BPEO Size 1 EOC 12-slot N501487A ECAM Single EVOL S5 - 18 (from 5 to 18 mm) 4 N530129A BPEO Size 1 EOC 12-slot N501487A 12 x cassettes 1-step
6 x cassettes 2-step All part numbers N711599A
BPEO Size 1 EVOL CDP 12-slot N501488A ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)12
N721130AN530129A
BPEO Size 1 EVOL CDP 12-slot N501488A 12 x cassettes 1-step
6 x cassettes 2-step All part numbers N711599A
BPEO Size 1 EVOL EDP 12-slot N501489A ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)14
N721130AN530128A
BPEO Size 1 EVOL EDP 12-slot N501489A 12 x cassettes 1-step
6 x cassettes 2-step All part numbers N711599A
BPEO Size 1 EVOL FDP BRANCH12-slot N501719A
ECAM Body Double D6 - 18 (from 6 to 18 mm)Cable Entry Kit for D6 - 18 - from 6 to 9 mmCable Entry Kit for D6 - 18 - from 9 to 12 mmCable Entry Kit for D6 - 18 - from 12 to 15 mmCable Entry Kit for D6 - 18 - from 15 to 18 mm
ECAM Single S3.5 - 9.5 (from 3.5 to 9.5 mm)
1----
10
N721162AN721163AN721164AN721165AN721166A
N721172A
BPEO Size 1 EVOL FDP BRANCH 12-slot N501719A 12 x cassettes 1-step
6 x cassettes 2-step All part numbers N711599A
BPEO Size 1 EVOL FDP DROP12-slot N501714A
ECAM Body Double D6 - 18 (from 6 to 18 mm)Cable Entry Kit for D6 - 18 - from 6 to 9 mmCable Entry Kit for D6 - 18 - from 9 to 12 mmCable Entry Kit for D6 - 18 - from 12 to 15 mmCable Entry Kit for D6 - 18 - from 15 to 18 mm
ECAM Single S3 - 7 (from 3 to 7 mm)
1----
16
N721162AN721163AN721164AN721165AN721166A
N721171A
BPEO Size 1 EVOL FDP DROP 12-slot N501714A 12 x cassettes 1-step
6 x cassettes 2-step All part numbers N711599A
BPEO Size 1.5 EVOL FDP BRANCH 12-slot N501747A
ECAM Body Double D6 - 18 (from 6 to 18 mm)Cable Entry Kit for D6 - 18 - from 6 to 9 mmCable Entry Kit for D6 - 18 - from 9 to 12 mmCable Entry Kit for D6 - 18 - from 12 to 15 mmCable Entry Kit for D6 - 18 - from 15 to 18 mm
ECAM Single S3.5 - 9.5 (from 3.5 to 9.5 mm) ECAM Single S5 - 18 (from 5 to 18 mm)
1----
132
N721162AN721163AN721164AN721165AN721166A
N721172AN530129A
BPEO Size 1.5 EVOL FDP BRANCH 12-slot
N501747A 12 x cassettes 1-step6 x cassettes 2-step All part numbers
Support built into the body of the housing
BPEO Size 1.5 EVOL FDP DROP 12-slot N501751A
ECAM Body Double D6 - 18 (from 6 to 18 mm)Cable Entry Kit for D6 - 18 - from 6 to 9 mmCable Entry Kit for D6 - 18 - from 9 to 12 mmCable Entry Kit for D6 - 18 - from 12 to 15 mmCable Entry Kit for D6 - 18 - from 15 to 18 mm
ECAM Single S3 - 7 (from 3 to 7 mm)ECAM Single S4 - 12 (from 4 to 12 mm)
1----
252
N721162AN721163AN721164AN721165AN721166A
N721171AN530128A
BPEO Size 1.5 EVOL FDP DROP 12-slot N501751A 12 x cassettes 1-step
6 x cassettes 2-step All part numbersSupport built into the body of the housing
BPEO Size 2 EVOL CDP 28-slot N501491A ECAM Double D5 - 27 (from 5 to 27 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)16
N721131AN530129A
BPEO Size 2 EVOL CDP28-slot N501491A 28 x cassettes 1-step
14 x cassettes 2-step All part numbers N711600A
BPEO Size 2 EVOL EDP28-slot N501492A
ECAM Double D5 - 27 (from 5 to 27 mm)ECAM Single S4 - 12 (from 4 to 12 mm)ECAM Single S5 - 18 (from 5 to 18 mm)
1102
N721131AN530128AN530129A
BPEO Size 2 EVOL EDP28-slot N501492A 28 x cassettes 1-step
14 x cassettes 2-step All part numbers N711600A
BPEO Size 2 EVOL BDP28-slot N501493A ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)116
N721130AN530128A
BPEO Size 2 EVOL BDP28-step N501493A 28 x cassettes 1-step
14 x cassettes 2 Step All part numbers N711600A
BPEO Size 3 EVOL CDP 48-slot N501494A ECAM Double D5 - 27 (from 5 to 27 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)16
N721131AN530129A
BPEO Size 3 EVOL CDP 48-slot N501494A 48 x cassettes 1-step
24 x cassettes 2 Step All part numbers N711600A
BPEO Size 3 EVOL EDP48-slot N501495A
ECAM Double D5 - 27 (from 5 to 27 mm)ECAM Single S4 - 12 (from 4 to 12 mm)ECAM Single S5 - 18 (from 5 to 18 mm)
1102
N721131AN530128AN530129A
BPEO Size 3 EVOL EDP48-step N501495A 48 x cassettes 1-step
24 x cassettes 2-step All part numbers N711600A
BPEO Size 3 EVOL BDP48-slot N501496A ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)116
N721130AN530128A
BPEO Size 3 EVOL BDP48-step N501496A 48 x cassettes 1-step
24 x cassettes 2-step All part numbers N711600A
BPEO Size 4 72-slot N501675A ECAM Double D5 - 27 (from 4 to 27 mm)
ECAM Single S4 - 27 (from 4 to 27 mm)15
N501790AN501791A
BPEO Size 4 72-slot N501675A 72 x cassettes 1-step
36 x cassettes 2-step All part numbers N711660A
9
FTTX Solutions
1 Exchange Solutions
RFO NG Optical Distribution Frame
> Description
The RFO NG is the new generation end-of-cable, connection modules and tray modules for exchange optical distribution units
It is used for fi bre distribution patchcord management on frames.
RFO NG exists in 12- or 6-drawers block with respective fi bre capacities of 144 and 72 fi bres.
RFO NG capacity depending on frames
12-drawer chassis 6-drawer chassis
Capacity Number of ports Capacity Number of ports2.00 m Frame 6 864 12 8642.50 m Frame 8 1152 16 11523.25 m Frame 11 1584 22 1584
Technical Information
Dimensions
Cable-head fi tted with modules
Height Width Depth
12-drawer chassis 258 mm 290 mm 260 mm
6-drawer chassis 126 mm 290 mm 260 mm
Connection modules
Height Width Depth
18 mm 160 mm 185 mm
Weight
12-drawer chassis 4.96 kg
6-drawer chassis 2.42 kg
Materials
Cable-head: Steel. Colour Ivory
Modules: Plastic. Colour Black
Connectivity: In standard type SC/APC, LC/APC or SC/UPC
Pigtails: Semi-tight structure 900 µm, single-mode fi bres G652D and G657 A2 and multimode fi bre OM3
Splices: Fusion-type splice support. Other types - please contact us
3M Télécommunications offers free training to allow you to take on projects with confi dence. Simply contact your area sales contact.
Training objectives:Installing an optical distribution frame (ODF) from the RFO NG range.
Content:• Installing an ODF in an exchange or a specifi c
network
• Connecting an ODF to the network
• Creating a client link between equipment and the network
Duration: 2 hours
Location: 3M location or directly on site
3M Télécommunications offers free training to
RFO NG installer training
10
Fibre optic Solutions
1 Exchange Solutions
Composition of the RFO NG system
Ordering Information
Description Reference No. MOQ
RFO NG - 12-drawer chassis 144 fi bres (without module) N711747A 1RFO NG - 6-drawer chassis 72 fi bres (without module) N711748A 1
Description Reference No. MOQ
RFO NG - Pre wired module 12 SC/APC G652D N541133A 12RFO NG - Pre wired module 12 SC/UPC G652D N541181A 12RFO NG - Pre wired module 12 SC Multi-mode OM3 N541199A 12RFO NG Symetric - Prewired Module 12 SC/APC G652 N541193A 12Protective patchcord holder for RFO NG symetric tray N671317A 12For other variations of RFO NG modules, please contact your local 3M representative.
Description Reference No. MOQ
RFO NG - Frame 2.00 m - 6 levels N801585A 1RFO NG - Frame 2.50 m - 8 levels N801595A 1RFO NG - Frame 3.25 m - 11 levels N801584A 1
Description Reference No. MOQ
RFO NG - 1000 m reel of tube D5/3 N581203A 1RFO NG - 25 m reel of tube D5/3 N581207A 1
Description Reference No. MOQ
RFO NG - Breakout Housing DEECAM D18 for 24 D5/3 N711547A 1RFO NG - Breakout Housing DEECAM D25 for 60 D5/3 N711597A 1
DEECAM Break-out module
For spreading out cable in 12-fi bre tubes for feeding modules (12 fi bres per module)
Frames
For mounting chassisChassis
6- or 12 drawers, for coiling of tubes and fi xing of Entry/Output tray modules of jumpers on the left using a comb
Jumper management using rings
Module
provides links as splices betweenthe cable fi bres and jumpers.
Corner pieces for fi xing the frame
Cable inlet through top or bottom
11
FTTX Solutions
1 Exchange Solutions
Ordering Information
19" chassis:• Height 3 U and usable width 84 units (84 HP/TE)
• Allows mounting of 12 MODF 2K modules (width 7 units)
• Content: Aluminium, chassis, pre-assembled, incl. 12 sets of guides for MODF modules
• Standard layout compatible with 2K modules of width 7
• Dimensions: 135 x 485 x 190 mm (H x W x D)
• Weight: 1.3 kg
Description Reference No. MOQ
MODF 2K-19" chassis, 3U 40026-515 30 1
19”, 1U Tray, Access Fibre Tray:• To be placed beneath the 3U chassis to stow coils of excess lengths of cable tubes.
• Access from the rear removable compartment.
• Content: - Pre-assembled with fi tting accessories- Dimensions: 44 x 483 x 280 mm (H x W x D)- Weight: 1.9 kg
Description Reference No. MOQ
MODF 2K-Tray 19”, 1U, Access Fibre Tray 40040-502 30 1
MODF 19” Optical Distribution Unit
> The MODF 2K 19” range
The 3M MODF is the benchmark in terms of equipment connection on 19" racks.
This distribution unit offers a high capacity of 144 fi bres per 3U chassis.
The MODF also allows scalable equipment of the chassis and is equipped with a 1U guide panel for jumpers with bending radius being secured.
Optical distributor for 19” rack
Capacity: 144 fi bres
Height : 3U
Characteristics
• Compact connection module
• Double sided stowage zone cassette for separation of non-sleeved fi bres and pigtails
• Complete system
Advantages
• Compact with 144 connexions on only 3U (19” Rack)
• Easy to install
• Can be extended at any time
• Coordination of jumper paths and preservation of minimum bending radius
• Coil stowage of excess lengths of fi bres
12
Fibre optic Solutions
1 Exchange Solutions
Ordering Information
Patchcord Management Tray, 19”, 1U:• 1U drawer to be fi xed beneath the chassis to manage the input and outputs of jumpers
• Left or right inputs, guides to secure bending radius requirements
• Content: - Pre-assembled with 6 guides and mounting accessories - Dimensions: 73 x 485 x 100 mm - weight: 1.1 kg
Description Reference No. MOQ
MODF2K-Patchcord Management Tray, 19", 1U 40036-521 30 1
MODF 2K/7 TE - Connection and splicing modules for 19" chassis:• Coupling modules 2K-7TE (35 mm width) pre wired with 12 connections and 12 pigtails
• All ends of pigtails are prepared for splicing and colour identifi ed
• Storage of excess lengths of pigtails and splices in separate cassettes
• The ANT splice protections, heat-shrink splice protections and their supports are available as accessories
• Capability of mounting 12 x 2K/7TE modules per chassis. Other 2K modules on demand
Description Reference No. MOQ
Module 2K/7TE-SM-SC/APC G652D 40395-514 45 1Module 2K/7TE-SM-SC G652D 40395-546 45 1For other variations of 2k modules, please contact your local 3M representative.
Splice module 2K/8TE - 24 splices:• Splice module with 2 splice cassettes.
• Dimensions: 128 x 40 x 215 mm (H x W x D)
Description Reference No. MOQ
Splice module 2K/8TE-24 splices: 40395-517 30 1
Cover 3U, 7TE: • To close unused locations in the rack
Description Reference No. MOQ
Cover 3U, 7TE 40018-018 30 25
13
FTTX Solutions
2 Transport Access Network Solutions
BPEO Size 4
> Description
The Dome Closure BPEO Size 4 fi bre-optic splice protection is IP68 watertight.
It is used to protect splices in underground or overhead installations with the capability of being fi xed horizontally or vertically in a manhole. The FDC 12S meets high fi bre-capacity requirements; up to 864.
A - ValvesB - ClosuresC - HooksD - Dual port ECAM D4-27E - 5 single port ECAM S4-27F - Earthing kitG - Closures
The BPEO Size 4 can be equipped with a dual ECAM D4-27 and 5 single ECAM S4-27. These entries allow micro-sleeve cables to be introduced with a maximum diameter of 27 mm.
Description Reference No. MOQ
BPEO Size 4 Dome Sleeve BPEO Size 4 - Dome Sleeve for 864 FO max - One double entry D4 - 27 + 5 x single entries D4 - 27
N501675A 1
Description Reference No. MOQ
ECAM ECAM Double D4-27 for BPEO Size 4 - One double entry D4 - 27 ECAM-27MM-D 1
ECAM Single S4-27 for BPEO Size 4 - One single entry D4 - 27 ECAM-27MM-S 1
Description Reference No. MOQSupport Wall support N711660A 1
Characteristics
• Fully mechanical closure
• 5 Individual entries + 1 double entry
• Use of 2 cassette organisers
• High capacity cassette organisers
• Supplied without cassettes and without cable entries
Advantages
• No fl ame, no energy source required
• Allows 1 cable to be connected in mid span access and/or up to 5 branched cables
• For high-capacity coiling and stowage of cable micro-structures or loose tubes
• Can be used to connect 720 / 864 fi bres
• Capable of using all the cassettes in the BPEO
AB
C
B
B G
F
D
E
Ordering Information
Technical Information
Dimensions in mm (L x H) : 658 x 335
Cable entry ports and dimensions
Single entry ports: 5 for cables of diameter 4 to 27 mm
Double oval entry port: 1 double port for cables of diameter 4 to 27 mm
Maximum number of fusion splices: 864 fi bres
Cassette: N541106A (cassette for 12 fusion splices)
Base material: Plastic
Closure system: Steel lock
Pressure fl ash test: 280 mbar
Max capacity: 864 Fibres
Volumes: 57.9L
Cable diameters: 4 to 27 mm
Confi gurations:- 1 Double port for ECAM D4-27
- 5 Single ports for ECAM S4-27
Perfect for 720-fi bre cables
14
Fibre optic Solutions
2 Transport Access Network Solutions
BPEO Size 3
> Description
The BPEO size 3 is an IP 68 watertight splice protection closure which allows the splicing of up to 288 each Fibrlok™ 2540-G mechanical splices or 576 each fusion splices.
The BPEO size 3 organiser is a 48-slot unit. Transit fi bres in uncut loose tubes or micro tubes can be stored behind the cassette support.
Characteristics
• Sealed closure opened using latches
• ECAM type cable entries
• Organiser with three management zones
• Storage of tubes, modules or bare fi bres in lower part of the organiser
• 48 slot organiser for swivel mounted cassettes
• Side channels for fi bres to pass through
• Plugs on all inlet ports and test valves as standard
Advantages
• Simplifi ed opening/closure
• No fl ame, no resin for preparation of entries
• ECAM preparation outside the housing
• Storage / protection on a genuine plate
• Cassettes for storing fi bres in 250 µm structure
• Ability to mix cassettes on the same organiser
• Easy access to fi bres
• Watertighness is confi rmed for each closure after assembly
Confi gurations of BPEO Size 3
Technical Information
Sealing: IP68
Impact: Resistance at 20 Joules (IK10)
Tensile: Tested at 100 daN on cable
Dimensions (in mm) : Length Width Depth Housing only Wall mounted Post/wall Underground 661 341 149 154 178 149
Number of slots in the organiser: 48
Max capacity: 576 Fibres
Volumes: 23.8L
Cable diameters: 4 to 27 mm
Confi gurations:- CDP (primary branch)
- EDP (secondary branch)
- BDP (distribution)
Primary branch CDP
- 6 single ports for ECAM S5-18- 1 double port for ECAM D5-27 or
2 single ports for ECAM S5-18
Secondary branch EDP
- 10 single ports for ECAM S4-12- 2 single ports for ECAM S5-18
- 1 double port for ECAM D5-27 or 2 single ports for ECAM S5-18
Distribution BDP
- 16 single ports for ECAM S4-12- 1 double port for ECAM D5-20 or
2 single ports for ECAM S4-12
Key:
Joint Droit EOC
Dérivation primaire CDP
Dérivation secondaire EDP
Branchement FDP
Single port for ECAM S5-18 Double port for ECAM D5-27 or 2 single ports for ECAM S5-18
Joint Droit EOC
Dérivation primaire CDP
Dérivation secondaire EDP
Branchement FDP
Single port for ECAM S4-12
Joint Droit EOC
Dérivation primaire CDP
Dérivation secondaire EDP
Branchement FDP
Double port for ECAM D5-20 or 2 single ports for ECAM S4-12
15
FTTX Solutions
2 Transport Access Network Solutions
Description Reference No. MOQ
BPEO Size 3 BPEO-3 EVOL CDP 48 SLOT Splice protection closure CDP
N501494A 1
BPEO-3 EVOL EDP 48 SLOT Splice protection closure EDP N501495A 1
BPEO-3 EVOL BDP 48 SLOT Splice protection closure BDP N501496A 1
Description Reference No. MOQ
ECAM Double and Single ECAM Single S4-12 Single cable entry kit with diameter from 4 to 12 mm
N721126A 10
ECAM Single S5-18 Single cable entry kit with diameter from 5 to 18 mm N721127A 10
ECAM Double D5-20 Double cable entry kit with diameter from 5 to 20 mm N721130A 5
ECAM Double D5-27Double cable entry kit with diameter from 5 to 27 mm N721131A 5
Description Reference No. MOQ
ECAM Extended (Multi-entry) ECAM Extended S12 - 12 x 1.5 mm for 12 x 1.5 mm cables
N721140A 10
ECAM Extended S18 - 7 x 5.5 mm for 7 x 5.5 mm cables(works for 6 x 6 mm) N721141A 10
ECAM Extended S12 - 10 x 2 mm for 10 x 2 mm cables N721142A 10ECAM Extended S12 - 4 x 4 mm for 4 x 4 mm cables N721146A 10
Description Reference No. MOQ
BPEO Cassettes K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
N541106A 20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter N541104A 10
K7-2SLOT-Universal for 12 heat shrink fusion splices N541121A 10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter N541113A 20
K7-1SLOT-6 Fibrlok™ 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok™ 2540-G mechanical splices N541103A 20
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok™ 2540-G mechanical splices N541108A 10
K7-2SLOT-10 Fibrlok 4 x 4 and splitter 2-step Cassette equipped with a support for 10ea Fibrlok™ 2540-G mechanical splices N541110A 10
Description Reference No. MOQ
Fixing support and adaptor kit BPEO Wall or Pole mounting kit BPEO sizes 2 and 3
N711440A 5
BPEO Sewer type mounting kit sizes 2 and 3 N711546A 5
BPEO Wall mounting kit V2 for BPEO sizes 2 and 3 N711600A 5
Coupling holder 6 x SC connectors for BPEO S1, S2, S3 (supplied without connectors) N711604A 20
Coupling holder 12 x SC connectors for BPEO S2, S3 (supplied without connectors) N711605A 20
Earthing kit for BPE/O* N151064A 10
* Not compatible with supports 711440/711438
Ordering Information
Extended ECAMs allow several cables to be inserted in entries.
16
Fibre optic Solutions
2 Transport Access Network Solutions
BPEO Size 2
> Description
The BPEO Size 2 is a watertight splice protection closure which allows splicing of up to 168 each Fibrlok™ 2540-G mechanical splices or 336 each fusion splices.
The size 2 organiser is a 28 slot unit. Transit fi bres in uncut loose tubes or micro tubes can be stored behind the cassette support.
Characteristics
• Sealed closure opened using latches
• ECAM type cable entries
• Organiser with three management zones
• Storage of tubes, modules or bare fi bres in lower part of the organiser
• 28 slot organiser for swivel mounted cassettes
• Side channels for fi bres to pass through
• Plugs on all inlet ports and test valves as standard
Advantages
• Simplifi ed opening/closure
• No fl ame, no resin for preparation of inlets
• ECAM preparation outside the housing
• Storage / protection on a genuine plate
• Cassettes for storing fi bres in 250 µm structure
• Ability to mix cassettes on the same organiser
• Easy access to fi bres
• Watertighness is confi rmed for each closure after assembly
Confi gurations of BPEO Size 2
Technical Information
Sealing: IP68
Impact: Resistance at 20 Joules (IK10)
Tensile: Tested at 100 daN on cable
Dimensions (in mm) : Length Width Depth
Housing only Wall mounted Post/wall Channel 520 341 149 154 178 149
Number of slots in the organiser: 28
Primary branch CDP
- 6 single ports for ECAM S5-18- 1 double port for ECAM D5-27 or
2 single ports for ECAM S5-18
Secondary branch EDP
- 10 single ports for ECAM S4-12- 2 single ports for ECAM S5-18
- 1 double port for ECAM D5-27 or 2 single ports for ECAM S5-18
Distribution BDP
- 16 single ports for ECAM S4-12- 1 double port for ECAM D5-20 or
2 single ports for ECAM S4-12
Key:
Joint Droit EOC
Dérivation primaire CDP
Dérivation secondaire EDP
Branchement FDP
Single port for ECAM S5-18 Double port for ECAM D5-27 or 2 single ports ECAM S5-18
Joint Droit EOC
Dérivation primaire CDP
Dérivation secondaire EDP
Branchement FDP
Single port for ECAM S4-12
Joint Droit EOC
Dérivation primaire CDP
Dérivation secondaire EDP
Branchement FDP
Double port for ECAM D5-20 or 2 single ports ECAM S4-12
Max capacity: 336 Fibres
Volumes: 17.3L
Cable diameters: 4 to 27 mm
Confi gurations:- CDP (primary branch)
- EDP (secondary branch)
- BDP (distribution)
17
FTTX Solutions
2 Transport Access Network Solutions
Description Reference No. MOQ
BPEO Size 2 BPEO-2 EVOL CDP 28 SLOT Splice protection housing CDP
N501491A 1
BPEO-2 EVOL EDP 28 SLOT Splice protection housing EDP N501492A 1
BPEO-2 EVOL BDP 28 SLOT Splice protection housing BDP N501493A 1
Description Reference No. MOQ
ECAM Double and Single ECAM Single S4-12 Single cable entry kit with diameter from 4 to 12 mm
N721126A 10
ECAM Single S5-18 Single cable entry kit with diameter from 5 to 18 mm N721127A 10
ECAM Double D5-20 Double cable entry kit with diameter from 5 to 20 mm N721130A 5
ECAM Double D5-27Double cable entry kit with diameter from 5 to 27 mm N721131A 5
Description Reference No. MOQ
ECAM Extended (Multi-entry) ECAM Extended S12 - 12 x 1.5 mm for 12 x 1.5 mm cables
N721140A 10
ECAM Extended S18 - 7 x 5.5 mm for 7 x 5.5 mm cables(works for 6 x 6 mm) N721141A 10
ECAM Extended S12 - 10 x 2 mm for 10 x 2 mm cables N721142A 10ECAM Extended S12 - 4 x 4 mm for 4 x 4 mm cables N721146A 10
Description Reference No. MOQ
BPEO Cassettes K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
N541106A 20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter N541104A 10
K7-2SLOT-Universal for 12 heat shrink fusion splices N541121A 10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter N541113A 20
K7-1SLOT-6 Fibrlok™ 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok™ 2540-G mechanical splices N541103A 20
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok™ 2540-G mechanical splices N541108A 10
K7-2SLOT-10 Fibrlok 4 x 4 and splitter 2-step Cassette equipped with a support for 10ea Fibrlok™ 2540-G mechanical splices N541110A 10
Description Reference No. MOQ
Fixing support and adaptor kit BPEO Wall or Pole mounting kit BPEO sizes 2 and 3
N711440A 5
BPEO Sewer type mounting kit sizes 2 and 3 N711546A 5
BPEO Wall mounting kit V2 for BPEO sizes 2 and 3 N711600A 5
Coupling holder 6 x SC connectors for BPEO S1, S2, S3 (supplied without connectors) N711604A 20
Coupling holder 12 x SC connectors for BPEO S2, S3 (supplied without connectors) N711605A 20
Earthing kit for BPE/O* N151064A 10
* Not compatible with supports 711440/711438
Ordering Information
Extended ECAMs allow several cables to be inserted in entries.
Colour code for compatibility between front faces BPEO (CDP, EDP and BDP) and ECAM versions
18
Fibre optic Solutions
3 Distribution Access Network Solutions
3.1 Underground distribution network
BPEO Size 1.5
The BPEO Size 1.5 is an IP68 watertight splice protection closure which allows splicing of 72 each Fibrlok™ 2540-G mechanical splices or 144 each fusion splices.
Despite remaining compact this new BPEO now provides a genuine distribution node between the street cabinet and all distribution points.
Characteristics
• Watertight closure opened using latches
• ECAM type cable entries
• Organiser with three management zones
• Storage of tubes, modules or bare fi bres in lower part of the organiser
• 12 slot organiser for swivel mounted cassettes
• Side channels for fi bres to pass through
• Plugs on all inlet ports and test valves as standard
Advantages
• Simplifi ed opening/closure
• No fl ame, no resin for preparation of inlets
• ECAM preparation outside the housing
• Storage / protection on a genuine plateau
• Cassettes for storing fi bres in 250 µm structure
• Ability to mix cassettes on the same organiser
• Easy access to fi bres
• Watertighness is confi rmed for each closure after assembly
Technical Information
Sealing: IP68
Impact tests: Resistant at 20 Joules (IK10)
Cable pull-out retention force: Tested at 100 daN on cable
Dimensions (in mm) : Length Width Depth 382 204 120
Colour Black
Material Thermoplastic
Splicing capacity 144 fi bres (12 cassettes à 12 heat shrink fusion splices 45 or 60 mm)
Max capacity: 144 Fibres
Volumes: 5.6L
Cable diameters: 3.5 to 18 mm
Height which allows easy storage and management of excess lengths
Wall support built into the body of the housing
Confi guration of BPEO Size 1.5
FDP Branch
• 1 double port for Double ECAM D6-18 or 2 Single ECAM S4-12
• 13 single ports for Single ECAMs S3.5-9.5
• 2 single ports for Single ECAMs S5-18
FDP Drops
• 1 double port for Double ECAM D6-18 or 2 Single ports S4-12
• 25 single ports for Single ECAMs S3-7
• 2 single ports for Single ECAMs S4-12
19
FTTX Solutions
3 Distribution Access Network Solutions
Description Reference No. MOQ
BPEO Size 1.5
BPEO - 1.5 FDP BranchN501747A 1
BPEO - 1.5 FDP Drops N501751A 1
Colour code for compatibility between front faces BPEO and ECAM versions
Description Reference No. MOQ
Double ECAM Double D6-18 ECAM for cable entry kitBody for housing double cable entry kits
N721162A 10
ECAM Double D6-9 mmSealing kit with diameter from 6 to 9 mm N721163A 10
ECAM Double D9-12 mm Sealing kit with diameter from 9 to 12 mm N721164A 10
ECAM Double D12-15 mm Sealing kit with diameter from 12 to 15 mm N721165A 10
ECAM Double D15 to 18 mm Sealing kit with diameter from 15 to 18 mm N721166A 10
ECAM Double D18 - 4,5/6 for cable entry kitBody for housing double cable entry kits N721162B 10
ECAM Double D4,5/6 mmSealing kit with diameter from 4,5 to 6 mm N721176A 10
For the ECAM Double D6-18, order the body (721162) and order each sealing kit depending on the diameter of cable required (from 6 to 18 mm).
Description Reference No. MOQ
Single ECAM Single ECAM S3-7 Single cable entry kit with diameter from 3 to 7 mm
N721171A 100
Single ECAM S3.5-9.5Single cable entry kit with diameter from 3.5 to 9.5 mm N721172A 60
Single ECAM S4-12Single cable entry kit with diameter from 4 to 12 mm N721126A 10
Single ECAM S5-18 Single cable entry kit with diameter from 5 to 18 mm N721129A 10
Description Reference No. MOQ
BPEO Cassettes K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
N541106A 20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter N541104A 10
K7-2SLOT-Universal for 12 heat shrink fusion splices N541121A 10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter N541113A 20
K7-1SLOT-6 Fibrlok™ 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok™ 2540-G mechanical splices N541103A 20
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok™ 2540-G mechanical splices N541108A 10
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped with a support for 10ea Fibrlok™ 2540-G mechanical splices N541110A 10
K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fi bre G657 (lot of 12 pcs) N541182A 1
Ordering Information
20
Fibre optic Solutions
3 Distribution Access Network Solutions
BPEO Size 1
The BPEO Size 1 is a watertight splice protection closure which allows splicing of up to 72 each Fibrlok™ 2540-G mechanical splices or 144 each fusion splices.
The organiser is a 12 slots unit as micro-structures mid span access and 8 slots as loose tubes mid span access.
New confi gurations
Confi gurations of BPEO Size 1
EOC Straight Joint
4 single ports for ECAM S5-18
Primary branch CDP
- 2 single ports for ECAM S5-18 - 1 double port D5-20 or 2 single ports for
ECAM S4-12
EDP Branch
- 4 single ports for ECAM S4-12 - 1 double port for ECAM D5-20 or 2 single ports for
ECAM S4-12 Key:
Joint Droit EOC
Dérivation primaire CDP
Dérivation secondaire EDP
Branchement FDP
Single port for ECAM S5-18 Double port for ECAM D5-27 or 2 single ports for ECAM S5-18
Joint Droit EOC
Dérivation primaire CDP
Dérivation secondaire EDP
Branchement FDP
Single port for ECAM S4-12
Joint Droit EOC
Dérivation primaire CDP
Dérivation secondaire EDP
Branchement FDP
Double port for ECAM D5-20 or 2 single ports for ECAM S4-12
Max capacity: 144 Fibres
Volumes: 4.8L
Cable diameters: 3 to 20 mm
Confi gurations:- EOC (Straight joint)
- CDP (Primary branch)
- EDP (Branch)
- FDP (Branch)
- FDP (Drops)
FDP Branch
FDP Drops
Technical Information
Sealing: IP68
Impact: Resistance at 20 Joules (IK10)
Tensile: Tested at 100 daN on cable
Dimensions (in mm) : Length Width Depth Housing only Wall mounted Pole mounted Channel 382 204 92 97 128 97
Number of slots: 12
Characteristics
• Watertight closure opened using latches
• ECAM type cable entries
• Organiser with three management zones
• Storage of tubes, modules or bare fi bres in lower part of the organiser
• 12 slot organiser for swivel mounted cassettes
• Side channels for fi bres to pass through
• Plugs on all inlet ports and test valves as standard
Advantages
• Simplifi ed opening/closure
• No fl ame, no resin for preparation of inlets
• ECAM preparation outside the housing
• Storage / protection on a genuine plateau
• Cassettes for storing fi bres in 250 µm structure
• Ability to mix cassettes on the same organiser
• Easy access to fi bres
• Watertighness is confi rmed for each closure after assembly
21
FTTX Solutions
3 Distribution Access Network Solutions
Description – BPEO Size 1 Reference No. MOQBPEO - 1 Evol EOC N501487A 1BPEO - 1 Evol CDP N501488A 1BPEO - 1 EDP N501489A 1BPEO - 1 FDP Branch N501719B 1BPEO - 1 FDP Drops N501714A 1
Colour code for compatibility between front faces BPEO and ECAM versions
Description – Double ECAM Reference No. MOQDouble D6-18 ECAM for cable entry kitBody for housing double cable entry kits N721162A 10
ECAM Double D6-9 mmSealing kit with diameter from 6 to 9 mm N721163A 10
ECAM Double D9-12 mm Sealing kit with diameter from 9 to 12 mm N721164A 10
ECAM Double D12-15 mm Sealing kit with diameter from 12 to 15 mm N721165A 10
ECAM Double D15 to 18 mm Sealing kit with diameter from 15 to 18 mm N721166A 10
ECAM Double D5-20 Double cable entry kit with diameter from 5 to 20 mm N721130A 5
For the ECAM Double D6-18, order the body (721162) and order each sealing kit depending onthe diameter of cable required (from 6 to 18 mm).
Description – Single ECAM Evolution Reference No. MOQSingle ECAM S3-7Single cable entry kit with diameter from 3 to 7 mm N721171A 100
Single ECAM S3.5-9.5Single cable entry kit with diameter from 3.5 to 9.5 mm N721172A 60
ECAM Single S4-12 Single cable entry kit with diameter from 4 to 12 mm N721126A 10
ECAM Single S5-18 - Single cable entry kitwith diameter from 5 to 18 mm N721127A 10
Description – ECAM Extended (Multi-entry) Reference No. MOQECAM Extended S12 - 12 x 1.5 mm for 12 x 1.5 mm cables N721140A 10ECAM Extended S18 - 7 x 5.5 mm for 7 x 5.5 mm cables(works for 6 x 6 mm) N721141A 10
ECAM Extended S12 - 10 x 2 mm for 10 x 2 mm cables N721142A 10ECAM Extended S12 - 4 x 4 mm for 4 x 4 mm cables N721146A 10
Extended ECAMs allow several cables to be inserted in entries
Description – BPEO Cassettes Reference No. MOQ
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices N541106A 20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter N541104A 10
K7-2SLOT-Universal for 12 heat shrink fusion splices N541121A 10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter N541113A 20
K7-1SLOT-6 Fibrlok™ 4 x 4 1-step Cassette equippedwith a support for 6ea Fibrlok™ 2540-G mechanical splices N541103A 20
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equippedwith a support for 12ea Fibrlok™ 2540-G mechanical splices N541108A 10
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassetteequipped with a support for 10ea Fibrlok™ 2540-G mechanical splices N541110A 10
K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fi bre G657(lot of 12 pcs) N541182A 1
Description – Fixing support and adaptor kit Reference No. MOQ
BPE/O Pole 1 Wall or Pole mounting kit BPEO size 1 N711438A 5
BPE/O Wall and post mounting kit V2 for BPEO size 1 N711599A 5
Coupling holder 6 x SC connectors for BPEO S1, S2, S3 (supplied without connectors) N711604A 20
Coupling holder 12 x SC connectors for BPEO S2, S3 (supplied without connectors) N711605A 20
Ordering Information
22
Fibre optic Solutions
3 Distribution Access Network Solutions
µQODC (Quick Optic Derivation Closure )
The µQODC micro-sleeve is an in line watertight splice protection closure designed for networks connecting subscribers using fi bre optics.
The housing, whose volume is less than 2 dm3 is designed to be installed in small L1T type chambers.
Ideal derivations on tubes or splicing on micro cables from window cut or mid span access feeder for FTTH networks.
Characteristics
• Compact
• Sealed and mechanical closure
• Extraction with or without splices, derivations, looping of cables
• Micro module-cable compatible
• Up to 24 splices and 1 PLC type splitter
• IP68 / IK09
• Up to 8 micro module-cable outputs of 2.5 mm
Advantages
• Less than 2 dm3 for installation in L1T chamber
• No fl ame, no resin No special tools
• A single product for the various distribution confi gurations
• Space saving in chambers and sewers
• Utilisation in PON and Point to Point networks
• Highly robust multi-purpose product used in underground chambers, directly buried and replacement of networks on walls
• Benefi ts for residential connections
µQODC confi gurations
Cable entries: Feeder 11 mm window cut cable or 4.2 mm micro module-cableDerivation: 2 Tubes of 3.3/5 mm, 2 x 4/6 mm cables or 8 2.5/3.5 mm cables
Connection point management
Micro-modules: 7 x 2.20 metres in storage beneath the cassette if used as spur on standard cables
Splices: As standard, support for 24 x 45 mm fusion splices
Splitter: 1 location for PLC type splitter 4 x 4 mm
Description Reference No. MOQ
Empty micro-sleeve for transit cablediameter 4.2 mm or 11 mm. Plugs on outlets
N501600A 13
Micro-sleeve 24 for transit cablediameter 4.2 mm or 11 mm. 2 off 4 x 2.5 mm outlets
N501604A 10
For other confi gurations please contact your local 3M representative
Ordering Information
Max capacity: 24 Fibres
Volumes: 1L
Cable diameters: 4.2 to 11 mm
Confi guration: 1 main cable diam. 11 mmor micro-cable diam. 4.2 mm
Branch of 2 tubes of diam. 3.3/5 mm or 2 cables of 4/6 mm or 8 cables of 2.5/3.5 mm
Compatible only with single-mode fi bres with small radii of curvature G657A2
Technical Information
Overall Dimensions: 295 x 83 x 55 mm
Overall Volume: 1L
Colour: Black
Degree of Protection: IP68 / IK09
Material: Thermoplastic body
Fastenings: stainless steel
Fixing: 2 screws -diameter 6 mm (not supplied)
23
FTTX Solutions
Characteristics
• Small size and volume
• Mounting bracket molded in the base body
• ECAM mechanical cable entries - Clip closure / simplifi ed opening
Advantages
• Versatile usage in the civil work
• Quick to install
• No tools required. New connections prepared outside the housing with no risk to fi bres already active
• No special tooling, so faster and more effi cient
Technical Information
Dimensions (Outside ECAM in mm) : Length Width Depth 239 222 84
Splicing capacity 4 x 1-slot cassettes or 2 x 2-slot cassettes, that is maximum 48 fusion splices of 45 or 60 mm
Material Thermoplastic
Colour Black
Sealing: IP68
Confi gurations of the BPEO Size 0
• 1 Double port* for 1 x ECAM D6-18 or 2 x ECAM S4-12
• 12 single ports* for ECAM S3-7
• 2 single ports* for ECAM S3.5-9.5
* The housing is supplied completely sealed, with blind plugs in all cable entry ports, which can easily be removed.
Max capacity: 48 Fibres
Volumes: < 2L
Cable diameters: 3 to 18 mm
3 Distribution Access Network Solutions
3.2 Under and above ground distribution network
BPEO Size 0
The new BPEO Size 0 watertight splice protection closure has been specifi cally designed to easily connect subscribers in the distribution network using ITU G652.D or ITU.G657.A2 single-mode fi bres.
Its compactness (volume less then 2 litres) means it can be used in any type of chamber, even the smallest.
Its butt confi guration facilitates the use in narrow chambers.
Its double port and its 14 single ports cover all applications, depending on the topography of the zone (residential, mixed or building).
The BPEO Size 0 has also been designed to be used in other FTTH branch applications (aerial, on pole, or on walls) or in any type of location.
24
Fibre optic Solutions
3 Distribution Access Network Solutions
Description Reference No. MOQ
BPEO-0 EVOL Splice Protection Housing N501741A 10
Ordering Information
Description Reference No. MOQ
BPEO Cassette K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
N541106A 20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter N541104A 10
K7-2SLOT-Universal for 12 heat shrink fusion splices N541121A 10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter N541113A 20
K7-1SLOT-6 Fibrlok™ 4 x 4 1-step Cassette equippedwith a support for 6ea Fibrlok™ 2540-G mechanical splices N541103A 20
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok™ 2540-G mechanical splices N541108A 10
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped with a support for 10ea Fibrlok™ 2540-G mechanical splices N541110A 10
K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fi bre G657(lot of 12 pcs) N541182A 1
Description Reference No. MOQ
Single ECAM Single ECAM S3-7 mmSingle cable entry kit with diameter from 3 to 7 mm
N721171A 100
Single ECAM S3.5-9.5 mmSingle cable entry kit with diameter from 3.5 to 9.5 mm
N721172A 60
Single ECAM S4-12 mmSingle cable entry kit with diameter from 4 to 12 mm
N721126A 10
Description Reference No. MOQ
Double ECAM Double ECAM Body D6-18 for cable entry kitBody for housing the double cable entry kits
N721162A 10
Double ECAM D6-9 mmSealing kit with diameter from 6 to 9 mm
N721163A 10
Double ECAM D9-12 mmSealing kit with diameter from 9 to 12 mm
N721164A 10
Double ECAM D12-15 mmSealing kit with diameter from 12 to 15 mm
N721165A 10
Double ECAM D15-18 mmSealing kit with diameter from 15 to 18 mm
N721166A 10
Double ECAM D18 - D4,5/6 for cable entry kitBody for housing double cable entry kits
N721162B 10
Double ECAM D4,5-6 mmSealing kit with diameter from 4,5 to 6 mm
N721176A 10
25
FTTX Solutions
3 Distribution Access Network Solutions
OSSC & OSLC & OSC30
Derivation closure for FTTx applications
ONE STEP CLOSURES (OSC) are sealed splice protections for inline derivations. These three housings can be used for micro-module derivations inline cables.
Designed for outdoor use on walls, on façade. Their compact dimensions also mean that they can be installed in indoor risers.
Content
• A single piece housing
• Sealing gel
• A central part to receive the spur
Characteristics
• Compact
• Sealed and mechanical closure
• Derivation without splices
• IP67 / IK09
Advantages
• No fl ame, no resin No special tools
• Space saving on façades or in risers
• For outdoor above ground usage
Technical Information
Sealing: IP 67
Materials: Thermoplastic
Colour: Black
Cable strain relief: Using ties
Fixing: 2 screws (not supplied)
Range of cables: Inline cables, 1 or 2 derivation with tube
Allowable Diameters/ Dimensions
OSSC 121T: 140 x 36 x 30 m: Distribution cable: max diameter 6.5 mmBranching: 1 x max diameter 6.5 mm
OSSC 122T: 140 x 36 x 30 mm: Distribution cable: max diameter 6.5 mmBranch tubes: 2 x max diameter 6.5 mm
OSLC 222: 150 x 50 x 40 mm: Distribution cable: max diameter 13 mmBranch tubes: 2 x max diameter 6.5 mm
OSC30: 290 x 95 x 50 mm: Distribution cable: max diameter 18 mm Branch tubes: 2 x max diameter 13 mm
Description Reference No. MOQ
Derivation closure OSSC 121T N501425A 25
Derivation closure OSSC 122T N501454A 25
Derivation closure OSLC 222 N501426A 10
Derivation closure OSC30 N501652A 10
Ordering Information
Allowable cables: 1 or 2 branches per tube
Max cable diameters 6.5 mm for OSSC (One Step Small Closure)13 mm for OSLC (One Step Large Closure)18 mm for OSC30
No special toolsPerfect for overhead applications
• Ties to immobilised the main cable
• and the branch tubes
• No tools needed for closure. Can be re-opened
26
Fibre optic Solutions
3 Distribution Access Network Solutions
3.3 Wall and Pole distribution network
PBO Size 1 NG
Its design is based on the BMX type outdoor box range. Its size has been reduced to meet the needs of a discrete or small-sized installation.
The housing can be installed either on pole or wall.
The hinge-mounted housing cover closure is latch operated.
The cables are anchored inside the housing on a strain relief bar.
The organiser and cassettes are the same standard as that found in our various sealed closures and boxes.
This ensures that the internal organisation of our housings are multi-purpose.
For locking mechanism, contact 3M.
Characteristics
• Small overall dimensions
• Housing with latch-operated hinged cover
• Directly mounted onto wall or pole
• BPEO evolution organiser and cassettes
Advantages
• Discrete
• Accessibility
• No fi xing bracket required
• Standard organiser and cassettes to facilitate delivery management of all 3M housings
Technical Information
Dimensions (mm)Height: 213Width: 240Depth: 73
Materials: Thermoplastics
Colour: Light Grey RAL 7035
Degree of Protection: IP 44 / IK 06
Dielectric strength for Greater than 4 kV
fi xing on common supports
Cable entries / Anchorage in bottom box entrance. Capable of mid span access cables.Anchorage and sealing for 1 to 2 feeder cables and 12 subscriber drops
Description Reference No. MOQ
Fibre Distribution Terminal PBO NG T1Supplied without cassette
N501733A 5
Plastic mounting bracket (need 1) N711608A 2
Ordering Information
Max capacity: 48 fi bres (4 cassettes)
Confi guration: - 1 to 2 service cables - 12 subscriber drops
Small size
Pole bracket molded into the body of the housing
4 break thru ports to fi x on wall
27
FTTX Solutions
3 Distribution Access Network Solutions
FTB (Fiber Terminal Box)
The FTB is an optical fi bre distribution housing It is designed for FTTH applications on walls or on posts.
This housing has 4 entries. It may also be equipped with a cassette for the management of splices or supports for SC or LC connections.
The FTB offers the possibility of a confi guration as 6 SC connectors or 6 Duplex LC. It is compatible with NPC connectors.
For locking mechanism, contact 3M.
Characteristics
• 2 large diameter 12.7 mm ports
• 2 small diameter 3.2 mm ports
• Elastomeric material port
• Support for SC and LC connections
• 1 tray holder
Advantages
• Compatible with standard diameters of cable and jumpers
• Compact
• Sealed without grommets or mastic
• Compatible with NPC fi eld connectors LC and SC 3M
• Splitter or Incoming fi bre splicing
Technical Information
Dimensions: 130 x 190 x 45 mm
Materials: Polycarbonate housing
EPDM port
Colour: RAL 7035
Sealing: IP 54
Impact: IK08
Fire: UL 94 5V
Description Reference No. MOQ
Empty FTB distribution housing FTB-M 1
Fibrlok™ mechanical splices and NPC connectors see pages 38 to 42.
Ordering Information
Max capacity: 12 fi bres
Cable diameter: up to 12.5 mm
Confi guration: - 2 x 12.5 mm ports- 2 x 1.2 mm ports
Sealing:No ECAM, no grommets
Housing supplied without connectors, NPC connectors or jumpers
28
Fibre optic Solutions
4 Solutions for Building Distribution
4.1 Building Entry Solutions
PBO Size 2
The PBO size 2 is a box for service riser connection. It is used for connection to the riser cable as a direct or mid span to feed one or more other boxes in a cascade arrangement .
Its capacity is 144 fusion splices.
Its organiser is of the BPEO Evolution 12 SLOT type as standard with management for fi bre units and couplings.
Characteristics
• Internal/external multi-purpose product
• Body cover with hinge opening 120°
• BPEO Evolution 12 SLOT Organiser
• Anchorage of drops using ties
• Possibility of cable passage
• Splitter management
• Fusion and mechanical splices
• Installation on walls, on pole, indoor, outdoor
• Components for diameter from 4 to 12 mm
Advantages
• One product for several applications
• Compact base of building unit
• Up to 144 fusion splices
• Robust product
• Allows distribution on cable or directly using drops
Description Reference No. MOQ
Base of building housing PBO S2 12 SLOT N501659A 1
Plastic fi xing supports (need 2) N711608A 2
Fibrlok™ mechanical splices and NPC connectors see pages 38 to 42
Ordering Information
Max capacity: 144 fi bres
Cable diameter: 4 to 12 mm
Confi guration: - 1 service cable including passage- 16 branch cables (drops)
4 break thru ports for direct mounting on wall or for 2 mounting brackets
Technical Information
Dimensions (mm)Height: 400Width: 255Depth: 86
Materials: Thermoplastics
Degree of protection (EN 60 529): IP55 / IK 06
Colour: Cover light grey Ral 7035Body dark grey Ral 7037
Capacity: Fusion splice 144 with 12 per 1-step cassetteFibrlok™ splice 4 x 4 72 with 12 per 2-step cassetteSplitter 6 x 1/8 or 3 x 1/16 or 2 x 1/32
Anchorage of cablesAnchorage strap for service cables and branch cables.Tie fi xings.
Confi guration:1 service cable including as passage16 branch cables (drops)
Fixing:Wall mounting using 4 screws diameter 6 mm (not supplied)Using a strap (20 x 0.7 mm)
29
FTTX Solutions
4 Solutions for Building Distribution
eDB²
The eDB² is a fi bre optic distribution box designed for installations at the base of buildings and on fl oor landings.
This housing is modular and has a wide range of accessories in order to meet the needs of various fi breoptics applications
The eDB² is an ideal FTTH distribution point with its 48-fi bre capacity. It is also suitable to create a multi-operator mutualisation point.
Equipped with the BPEO organiser, this product provides a management system for mechanical splices and splitters.
This housing is made up of 2 separate compartments to ensure the best possible protection for splices and splitters. It may also be equipped with SC/APC connection systems and with drops.
The eDB² offers the option of installation in the form of a cascade. The in-line confi guration meets high-capacity fi bre requirements.
Characteristics
• High degree of modularity for use internally or externally
• Organiser with swivel cassette
• Organiser with area for storage of ready fi bre
• Device for immobilisation of the cable/tubes and drops
• Wall mounting
Advantages
• Product suitable for various applications
• Ease of access to every fi bre
• Distinction of active and passive fi bres
• Excellent cable support
Description Reference No. MOQ
eDB² Base Assembly 52-500-00000 1 ea
Accessory Pack 1 52027-544 00 1 ea
Accessory (Dropfi x) 52031-600 00 50 ea
For individual project adaptations of the eDB2 please contact your local 3M representative.
Ordering Information
Technical Information
Characteristics FO Capacity Cassettes
Fusion splices 48 4Mechanical splices 24 4
Cable20 drops with a maximum diameter of 5 mm2 main cables with a maximum diameter of 13 mm
Dimensions (mm)Height: 320Width: 248Depth: 50
Materials: Thermoplastics
Colour: Body and cover Ral 7035
Degree of protection (EN 6529): IP 55 / IK 06
Max capacity: 24 SC simplex connections
Confi guration: Empty housing to receive equipment for a high degree of modularity
Fitting:As cascade or in line
Option to use as shared distribution pointeDB² Base Assembly • 2 x Patch fi eld 12 x SC• 2 x Cable Entry 10x5mm• 1 x Splitter holder• 2 x PAS II empty• 2 x Splice Holder Heat shrink• 2 x Splice Holder Crimp• 4 x Strain Relief black• 2 x Label 1-12 und 13-24• 2 x Flex Bridge• 1 x Inner Cover incl. holder etc.
Accessory Pack 1 • 1 x 6 x 13 Cable Entry• 1 x Cable Slack Drum• 1 x Rear Entry
Accessory (Drop fi x) • 50 x Dropfi x
30
Fibre optic Solutions
Max capacity: 48 fi bres
Cable diameter: 4.5 to 13.5 mm
Confi guration:12 ports for 12 to 24 branched cables
Immobilisation: Using ties
4 Solutions for Building Distribution
4.2 Building Floor Solutions
PBPO 24 NG Symetric
Floor BoxThe PBPO 24 is a genuine interface between vertical distribution and subscriber connection cables.Installation on standard cables and window cut riser cables.Composition:• A zone in which the vertical cable passes, with two anchorages • A zone for coiled stowage of fi bres and microtubes, passing or awaiting use• A BPEO Evolution generation 4-step organiser• A choice of cassettes for fusion- or mechanical splices or for splice-in PLC splitters • Capacity from 12 to 48 splices
The PBPO 24The PBPO 24 is equipped with 12 ports for 12 to 24 drop cables. The cables are anchored on external pin brackets in front of the sealing partition, using ties.
Characteristics
• Compact housing, sliding cover
• Double anchorage of the main cable
• Large stowage area for microtubes and fi bres
• BPEO evolution type organiser
• 4-slot capacity
• Riser pathway left and right
Advantages
• Exposed or service riser mounting
• Mounting on stretched cable, standard cable as spur, or junction of two cables
• Management of non-sleeved fi bres, no re-tubing
• Large number of possible cassette combinations
• For any riser confi gurations
Technical Information
Dimensions (mm)Height: 204Width: 158Depth: 52
Materials: Thermoplastics
Colour: White
Degree of Protection: IP 40 / IK 08
Allowable cables: Mounting on stretched cable, standard cable as spur, or junction of two cablesAllowable cable diameters- Main: 13.5 mm- Branch: 4.5 mm
Cable immobilisation:Main: on 2 cradles (2 ties + 2 force restraints)Branches: 12 entry ports with exterior immobilisation using ties for 1 or 2 branch cables
Connections: • 4-step organiser to accept the entire range of BPEO cassettes• Management of non-sleeved fi bres• Large storage zone for fi bres and micro-tubes• Maximum capacity 48 fusion type splices
Description Reference No. MOQ
PBPO 24 NG Symetric - External drops immobilisation N501758A 10
Kit backmount plate N711833A 10
Protection Cover N681288T 10
Ordering Information
31
FTTX Solutions
4 Solutions for Building Distribution
PBPO/C NG Symetric
Interior connection housingThe PBPO/C is a genuine interface for connection between a vertical distribution unit and equipmentInstallation on standard cables and window cut riser cables.Composition: • A zone in which the vertical cable passes with two anchorage points• A zone for coiled stowage of fi bres and microtubes passing or ready for use• A BPEO Evolution generation 4-step organiser• A choice of cassettes for fusion- or mechanical splices or for splice-in PLC splitters
Capacity• from 12 to 48 splices• Support plate for 16 connectors of connection type SC/PC or SC/APC
Characteristics
• Compact housing, sliding cover
• Double anchorage of the main cable
• Large storage area for microtubes and fi bres
• BPEO evolution type organiser
• 4-slot capacity
• Riser pathway left and right
Advantages
• Exposed or service riser mounting
• Mounting on stretched cable, standard cable as spur, or junction of two cables
• Management of non-sleeved fi bres, no retubing
• Large number of possible cassette combinations
• For any riser confi guration
Technical Information
Dimensions (mm)Height: 204Width: 158Depth: 52
Materials: Thermoplastics
Colour: White
Degree of Protection: IP 40 / IK 08
Allowable cables: Mounting in stretched cable, standard cable as spur, or junction of two cablesAllowable cable diameters- Main: 13.5 mm- Branch: 4.5 mm
Cable immobilisation:- Main: on 2 cradles (2 ties + 2 force restraints)- Branched: 16 entry ports with exterior immobilisation using ties for 1 or 2 branch cables
Connections: • 4-step organiser to accept the entire range of BPEO cassettes• Management of non-sleeved fi bres• Large storage zone for fi bres and micro-tubes• Maximum capacity 48 fusion type splices
Description Reference No. MOQ
PBPO/C NG Symetric N501760A 10
Kit backmount plate N711833A 10
Protection Cover N681288T 10
Ordering Information
Max capacity: 48 fi bres
Cable diameter: 13.5 mm for main cable4.5 mm for branched cable
Confi guration:For 16 SC simplex couplings
Immobilisation: Using ties
Supplied without connectors
32
Fibre optic Solutions
4 Solutions for Building Distribution
4.3 Solution for Living Units
Wall Outlet 4 Fibres
The wall outlet 4 fi bres is the latest development of our terminal points for subscribers, specifi cally designed for connection of subscribers in very dense zones.
Reduced format for installation of 1 to 4 optic ports of type SC.
Installation inside the communications panel or wall mounting inside the accommodation.Base unit provided with four side access points for connection cable, plus rear access for the entry through fl ush mounted housing.
Characteristics
• Dimensions : 100 x 82.5 x 30.8 mm
• Vertical or horizontal attachment on DIN rail
• Fibre central protection cover (network side)
• Management of fi bre optics in a cassette
• Removable cassette with built-in cable immobilisation and connector supports of the 4 connectors and of the connector for the client lead using peripheral cover
• Identifi cation of the subscriber connection by protected label beneath transparent fl ap
• Fixing strip
Advantages
• Compact housing with protected connections
• Ease of integration into all types of communications panel
• Differentiated access for installation and operation
• Multiple use capabilities: cables ready-fi tted with connectors, fi eld connectors, mechanical or fusion splices
• Improved reliability through protection of the connection and total protection of the connectors.
Technical Information
Dimensions (mm)
Height: 82.5
Width: 100
Overall thickness: 30,8
Thickness / Rail : 25
Materials: Thermoplastics
Colour: White- RAL9010
Connection system: SC/APC
Splice support: For 4 mechanical splices, fusion splices or both
Oultlet for communications panel or wall mounting
Max capacity: 4 fi bres
Connection system: SC/APC
Coupling type: SC/APC shuttered couplings
Confi gurations:- Outlet with 2 pre-terminated SC/APC connectors/couplings to a 2 fi bre cable
- Outlet with 2 pre-terminated SC/APC connectors/couplings to a 4 fi bre cable
- Outlet with 4 pre-terminated SC/APC connectors/couplings to a 4 fi bre cable
- Outlet with 4 SC/APC couplings and 2 SC/APC pigtails
- Outlet with 4 SC/APC couplings
Design: compact
33
FTTX Solutions
4 Solutions for Building Distribution
Technical information (cont)
Content of the delivery: Base, cassette, central cover, peripheral cover, strip, cable anchoring fi xtures, labelling
Stowage: 1metre of 250 µm or 900 µm fi bre
Wall fi xing 3 fi xing optionsDirectly using 2 screws (not supplied)Clip fi xing onto the small strip, fi xed to the wall using 2 screwsScrewed fastening onto a fl ush-mounted housing
Protection index: IP40
Connection protection: The connectors and terminals are protected by the cover
Standard connection with pigtails and splices or use of FMC type fi eld connection system (Field Mountable Connector) or use of pre-terminated cables with connectors ready-fi tted.
Use as 1, 2, or 4 SC/APC connection
For fusion- or mechanical splices
Description Reference No. MOQ
Wall outlet equipped with 4 shuttered SC/APC couplings N501689A 10
Wall outlet equipped with 4 shuttered SC/APC couplings and 2 SC/APC pigtails
N501677A 10
Wall outlet equipped with 4 shuttered SC/APC couplings with 4 pre-terminated SC/APC connectors to a 4 fi bre cable, 25 m
N501762A 1
Wall outlet equipped with 4 shuttered SC/APC couplings with 4 pre-terminated SC/APC connectors to a 4 fi bre cable, 40 m
N501763A 1
Wall outlet equipped with 4 shuttered SC/APC couplings with 2 pre-terminated SC/APC connectors to a 4 fi bre cable, 25 m
N501680A 1
Wall outlet equipped with 4 shuttered SC/APC couplings with 2 pre-terminated SC/APC connectors to a 4 fi bre cable, 40 m
N501681A 1
Wall outlet equipped with 2 shuttered SC/APC couplings with 2 pre-terminated SC/APC connectors to a 2 fi bre cable, 25 m
N501682A 1
Wall outlet equipped with 2 shuttered SC/APC couplings with 2 pre-terminated SC/APC connectors to a 2 fi bre cable, 40 m
N501683A 1
Ordering Information
34
Fibre optic Solutions
4 Solutions for Building Distribution
Wall Outlet 2 Fibres
The 83 x 106 is used as an interior derivation and terminaison box.
Installation inside the communications panel or wall mounting inside the accommodation.
Base unit provided with three side access points (5 in the branch/transition version) for connection cables, plus rear access for the entry through fl ush mounted housing.
Wall fi xing.
Characteristics
• Format 106 x 83 x 24 mm
• Management of fi bre optics using cassettes
• Designed for 3 types of use: Terminal point, branch housing or transition
• 2 labelling zones
Advantages
• Compact housing
• Swivel cassette for fusion and mechanical splices
• Multi-purpose
• Differentiated zones for the operator logo and the subscriber's number
Technical Information
Description: Wall Outlet 2 FO
Dimensions (in mm)Height: 83Width: 106Overall thickness: 24
Materials: Thermoplastics
Colour: White- RAL9010
For subscriber cable max diameter 6 mmConnection: 2 optical connections to SC/APC standard
Splice support: For 2 mechanical splices or 4 fusion splices
Make-up of equipment supplied: Base, cassette, cover, cable immobilisation
Stowage: 1 metre of 900 µm fi bre
Fixing: Wall mounted or on fl ush-mounted housing using 2 screws
Protection index: IP40
Port protection: SC/APC shuttered couplings
Outlet for wall fi xing.
Capacity: 2 fi bres
Design
Connection system: SC APC
Confi gurations: Equipped with a shuttered couplingEquipped with 2 shuttered couplingsEquipped with 2 shuttered couplingsand 1 pigtail
Description Reference No. MOQ
Wall Outlet 2 FO equipped with a shuttered coupling N501752A 24
Wall Outlet Point equipped with 2 shuttered couplings N501753A 24
Wall Outlet 2FO equipped with 2 shuttered couplingsand 1 pigtail
N501754A 24
Ordering Information
35
FTTX Solutions
4.4 FTTH Wall Outlets
3M™ 8686 FTTH Wall Outlet
The 8686 FTTH Wall Outlet is a universal access point for FTTH end user installation.
This outlet is designed to match with new generation of fi eld mountable connectors like 3M No Polish Connectors (NPC).
Field mountable connector termination in the 8686 outlet avoid installing a fi ber storage tray and splicing.
Alternatively, the splicing of pigtails and the storage of splices, either fusion or 3M Fibrlok™ mechanical splices is designed into the concept.
On the wall cable entry is possible from either the sides or from the top of the outlet.
The 8686 outlet can be mounted on the wall or on underwall 60 mm boxes.
Up to 4 SC simplex couplings can be mounted if used with G.657.A bend insensitive fi bre.
Specifi cations
Dimensions: 86 x 86 x 35 mm (WxLxD)
Capacity: 4 x SC simplex (G.657.A fi bre)
2 x SC simplex (G.652.D fi bre)
2 x LC duplex (G.657.A fi bre)
Connectivity: 3M NPC connectors or 900 µm pigtails
Cable: FRP drop cable or round cable 4-6 mm
Cable entry: Backside or all vertical and horizontal sides
Fixation: Holes for screw fi xing (60 mm distance)
Additional features: Splice holder for mechanical or heatshrink fi bre splices Keystone port for Kat 5 jack
4 Solutions for Building Distribution
Description Reference No. MOQ
Fibre Optic Wall Outlet 4 x SC simplex with Keystone Port for RJ45 Jack 8686 10
Ordering Information
36
Fibre optic Solutions
3M™ VOL-0256-C FTTH Wall Outlet
The VOL-0256-C FTTH Wall Outlet is a universal access point for FTTH end user installation which has integrated dust shutters.
This outlet is designed to match with new generation of fi eld mountable connectors like 3M No Polish Connectors (NPC).
Field mountable connector termination in the VOL-0256-C outlet avoid installing a fi ber storage tray and splicing.
Alternatively, the splicing of pigtails and the storage of splices, either fusion or 3M Fibrlok™ mechanical splices is designed into the concept.
On the wall cable entry is possible from either the sides or from the top of the outlet.
The outlet can be mounted on the wall or on underwall 60 mm boxes.
Up to 2 SC simplex or 2 LC duplex couplings can be mounted inside the keystone adapters if used with G.657.A bend insensitive fi bre.
Specifi cations:
Dimensions: 86 x 86 x 27 mm (W x L x D)
Capacity: 2 x SC simplex (G.657.A fi bre)
2 x LC duplex (G.657.A fi bre)
Connectivity: 3M NPC connectors or 900 µm pigtails
Cable: FRP drop cable or round cable 4-6 mm
Cable entry: Backside or all vertical and horizontal sides
4 Solutions for Building Distribution
Description Reference No. MOQ
Fibre Optic Wall Outlet 2 x SC simplex with Keystone Adpater and Dust Shutters
VOL-0256-C 20
Ordering Information
37
FTTX Solutions
5 FTTH Connectivity
5.1 NPC ConnectorsQuick and Easy connectivity for the „Last Mile“Pre-assembled mechanical splice-on connectors
3M™ No Polish Connectors (NPC)
3M™ No Polish Connectors (NPC) help enable fast, on-site installation of 250 µm, 900 µm and jacketed single-mode and multimode fi ber and cable• One piece, pre-assembled design
• Factory polished, no fi eld polish
• Integrated mechanical splice element
• No loose parts
• Ideal for FTTP drop termination
• Quick installation no electrical power
• Activation tool included
• Integrated strain relief for 900 µm buffer
• SC/APC and LC/APC also available with fl at or keyed angle splicing
• Re-opening tool incl. for reusability
• Training videos online
• Compatible with common SM fi bres (ITU.G652.D, G657A)
NPC UPC - Specifi cations
6800-50 Multimode6800-50/LOMMF 6800-62.5 Single-mode
8800
Insertion loss Typical at 1300 nm 0.2 dB 0.2 dB 0.2 dB 0.3 dB
Refl ection typical at roomtemp 23° C (73° F) (dB)
< -30 dB < -30 dB < -25 dB < -40 dB
Connector durability < 0.1 dB changeafter 500 matings
< 0.1 dB changeafter 500 matings
< 0.1 dB changeafter 500 matings
< 0.2 dB changeafter 100 matings
Operating temperature -40° C to 75° C -40° C to 75° C -40° C to 75° C -40°C to 75°C
Cable tension (in service)Straight pull
Side pull
< 0.1 dB increase at 2.2 Nfor 900 µm< 0.1 dB increase at 2.2 Nfor 900 µm
< 0.1 dB increase at 2.2 Nfor 900 µm< 0.1 dB increase at 2.2 Nfor 900 µm
< 0.1 dB increase at 2.2 Nfor 900 µm< 0.1 dB increase at 2.2 Nfor 900 µm
< 0.5dB increase at 6.9 Nfor 900 µm*< 0.1 dB increase at 2.2 Nfor 900 µm*
MaterialConnector ferruleConnector housing and bodyBoot
Zirconia ceramicEngineered resinThermoplastic elastomer
Zirconia ceramicEngineered resinThermoplastic elastomer
Zirconia ceramicEngineered resinThermoplastic elastomer
Zirconia ceramicEngineered resinThermoplastic elastomer
Flame retardancy UL-94 V-O UL-94 V-O UL-94 V-O UL-94 V-O
Connector identifi cationBackboneHousingBoot
BlackBlackWhite
BlackAquaWhite
BlackBeigeWhite
BlackBlueWhite
Field termination kit(no power needed)
8865-C 8865-C 8865-C 8865-C
The SC MM NPC meets EIA/TIA 568-8.3 and IEC requirements.* Connectors tested under load
38
Fibre optic Solutions
5 FTTH Connectivity
NPC APC - Specifi cations
Fiber diameter: 125 µmInsertion loss: 0.3 dB typicalRefl ection (Flat splice): -55 dB typical at room temperature < -35 dB for -40° C to 75° C (Angle splice): -65 dB typical at room temperature < -60 dB for for -40°C to 75°C Connection durability, after 100 matings: < 0.2 dB changeOperating Temperature: -40° C to 75° C (8832-APC -10°C to 60°C)Cable tension (In service): < 0.5 dB increase at 4.9N for 250 µm < 0.5 dB increase at 6.9N for 900 µmSide Pull (In service): < 0.5 dB increase at 6.9N for 900 µmWater immersion, 43°C (109°F), 3 days: < 0.2 dB increase after 24 hour dry timeDimensions: 12.7 x 12.7 x 49 mm
3M™ No Polish Connector Termination Kit 8865 and 8865-C
• Enables fast, on-site installation of NPC Connectors on 250 µm, 900 µm and jacketed singlemode and multimode fi ber cable
• Low cost kit with or without cleaver
3M™ Angle Splicing Kit 2565 for NPC Connectors and Fibrlok™ Splices
• Enables fast, on-site installation of NPC/APC Connectors on 250 µm and 900 µm singlemode and multimode fi bre with angle splicing
• Kit contains angle cleaver and splicing tools for keyed angle splicing
Ordering Information
Ordering Information
Description Reference No. MOQ
SC/APC SM 9/125 µm NPC Connector 250/900 µ, Angle Splice, incl. tool 8800-APC/AS 60
SC/APC SM 9/125 µm NPC Connector 250/900 µm, Flat Splice, incl. tool 8800-APC/FS 60
SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm jacket and FRP, Flat Splice
8802-T/APC/FS/1.6-3.0
60
SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm jacket and FRP, Angle Splice
8802-T/APC/AS/1.6-3.0
60
LC/APC SM 9/125 µm NPC Connector 250/900 µ, Angle Splice, incl. tool 8830-APC/AS 60
LC/APC SM 9/125 µm NPC Connector 250/900 µm, Flat Splice, incl. tool 8830-APC/FS 60
LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm jacket, Flat Splice 8832-APC/AS 60
LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm jacket, Angle Splice 8832-APC/FS 60
MOQ of all types is 60 each including one activation tool.
Description Reference No. MOQ
No Polish Connector Preparation Kit with Cleaver 8865-C 1
No Polish Connector Preparation Kit without Cleaver 8865 1
Fibrlok and NPC Angle Splice Kit with 2535 Angle Cleave Tool 2565 1
MOQ for all Kits is 1 each.
39
FTTX Solutions
5 FTTH Connectivity
5.2 Crimplok + ConnectorsQuick and Easy connectivity for the „Last Mile“No Splice - No Gel mechanical grip-on connectors
3M™ Crimplok + Connectors
3M™ Crimplok + Connectors help enable fast, on-site installation of 250 µm and 900 µm singlemode and multimode fi ber and cable• One piece, pre-assembled design
• No splice - No gel
• Integrated mechanical grip element
• No loose parts
• Ideal for FTTP drop termination
• Quick installation no electrical power
• Quick fi eld polish with Nano Finisher
• Polishing fi lm comes with each connector
• Activation tool included
• SC/PC and SC/APC
• Training videos online
• Compatible with all SM fi bres
3M™ Crimplok™ + Connector Specifi cations
MM6700-50
MM6700-50/LOMMF
MM6700-62.5
SM8700-UPC / 8700-APC
Refl ection (dB) < -30 < -30 < -30 < -40 (UPC) / <-60 (APC)
Connector durability, after 500 matings
< 0.1 dB change < 0.1 dB change < 0.1 dB change < 0.2 dB change
Operating temperature -10° C to 60° C -10° C to 60° C -10° C to 60° C -40° C to 75° C
Cable tension (in service)Straigh pull
Side pull
< 0.1 dB increase at 5 Nfor 900 µm
< 0.1 dB increase at 2 Nfor 900 µm
< 0.1 dB increase at 5 Nfor 900 µm
< 0.1 dB increase at 2 Nfor 900 µm
< 0.1 dB increase at 5 Nfor 900 µm
< 0.1 dB increase at 2 Nfor 900 µm
< 0.5 dB increase at 6.9 Nfor 900 µm
< 0.5 dB increase at 6.9 Nfor 900 µm
Connector identifi cationHousing/Boot Black/White Aqua/White Beige/White Blue/White (UPC)
Green/White (APC)
Field termination kit(no power needed)
8765-UPC 8765-UPC 8765-UPC 8765-UPC (UPC)8765-APC (APC)
Ordering Information
Description Reference No. MOQ
Crimplok™ + Connector SC/UPC, SM, 900 µm, (60ea) with PS Tool 8700-PS/UPC 60
Crimplok™ + Connector SC/APC, SM, 900 µm, (60ea) with PS Tool 8700-PS/APC 60
MOQ of Crimplok + Connectors is 10 each (excl. PS tool) or 60 each (incl. PS tool).
40
Fibre optic Solutions
5 FTTH Connectivity
3M™ Crimplok + Termination Kits
• Enable fast, on-site installation of 250 µm and 900 µm singlemode and multimode fi bre
• Special kits for SC/PC and SC/APC
• Standard fl at cleaver
• Nano Finisher included
• Protrusion setting tool (PS tool) included
Ordering Information
Description Reference No. MOQ
Crimplok™ + SC/UPC Connector Kit 8765-UPC 1
Crimplok™ + SC/APC Connector Kit 8765-APC 1
MOQ of all Crimplok + Termination Kits is 1 each
41
FTTX Solutions
Description Reference No. MOQ
Fibrlok II Universal Flat Fiber Splice, 250 µm and 900 µm (4 x 6 mm) 2529 60
Fibrlok II Angle Fiber Splice, 250 µm and 900 µm (4 x 6 mm) 2529-AS 60
Fibrlok 250 µm Flat Fiber Splice (4 x 4 mm) 2540-G 60
Fibrlok 250 µm Angle Fiber Splice (4 x 4 mm) 2540-AS 60
MOQ for all Fibrlok splices is 60 each
Description Reference No. MOQ
Fibrlok Fiber Prep Kit (w/ Cleaving Tool CI-01A), 2501, 2504-G and Fibrlok samples
2559-C 1
Fibrlok Fiber Prep Kit (w/o Cleaving Tool) w/ 2501, 2504-G and Fibrlok samples
2559 1
MOQ of all Fiberlok + Termination Kits is 1 each.
5.3 Fibrlok™ Mechanical SplicesQuick and Easy splicing for the „Last Mile“
3M™ Fibrlok™ Mechanical Splices
3M™ Fibrlok™ Mechanical Splices help enable fast, on-site splicing of 250 µm and 900 µm single-mode and multimode fi ber • One piece, pre-assembled design• Splice element compensates fi bre OD tolerances• Flat - and angle splice version for high return loss• Quick and easy installation• Two different sizes 4 x 4mm and 4 x 6mm• Simple and low cost tooling for fl at and keyed angle splicing• Online training videos• 20 years fi eld experience with 15 million installed splices• Losses equivalent to fusion splicing
3M™ Fibrlok™ Preparation Kits
3M™ Fibrlok™ Preparation Kits help enable fast, on-site splicing of 250 µm and 900 µm singlemode and multimode fi ber with Fibrlok splices.• Low cost tool kits with or without fl at cleaver• Actuation tools for both Fibrlok types included
5 FTTH Connectivity
Specifi cationsFiber diameter: 125 µmCoating diameter: 250 or 900 µmMean insertion loss: < 0.1 dBRefl ectance: < -35 dB from -40° to 80° C < -60 dB typical at room temperatureTensile strength: 4.4N minimum; 13.2N typicalMaterial: Engineering thermoplastic with aluminium alloy element; UL 94, V-O ratingOperating temperature: -40° to 80° CThermal cycling: Change in insertion loss < 0.5 dB, -40° to 80° C Fungus resistance: ASTM G-21-70; rating 0Vibration: IEC 61300-2-1 (EIA standard FOTP-11; test condition 1)Water immersion: Seven days at 43° C; change in insertion loss ≤ 0.05 dB;
21,000 hours with < 0.2 dB changeExtended high humidity: 8,812 hours at 85° C, 85% humidity with < 0.2 dB change
Ordering Information
Ordering Information
42
Fibre optic Solutions
Description Reference No. MOQ
FRP Splice Connector (Ivory) 2569 100
FRP Splice Connector (Grey) 2569 100
MOQ for all FRP Splice Connectors is 100 each.
5.4 Fibrlok™ Indoor FRP Splice ConnectorQuick and Easy splicing of FRP drop cable
3M™ 2569 Indoor FRP Splice Connector
3M™ 2569 Indoor FRP Splice Connector help enable fast, on-site splicing of 2 x 3mm FRP 1 fi bre indoor drop cable• One piece, pre-assembled design
• Splice element compensates fi bre OD tolerances
• Flat- and angle splice version for high return loss
• Quick and easy inline splicing of 2 x 3mm FRP drop cable
• Perfect strain relief due to aramide clamping
• Two colours, grey and ivory
5 FTTH Connectivity
Specifi cations
Appplication: Indoor application
Dimensions: 9 x 82 mm (Ø x L)
Cable type: Suitable for 2 x 3 FRP cable
Insertion loss: 0.1 dB typical
Refl ection: ≤ -40 dB typical at room temperature
Cable retention force: > 40N
Operating temperature: -20° to 60° C
Temperature cycling: -40° C ~ +85° C, 21 cycles, 168h, online test, IL change ≤ 0.1 dB
Salt Spray: 5% NaCl, +35° C, 48 h, IL change ≤0.1 dB
Vibration: Amplitude 1.5 mm, 10 Hz - 55 Hz, 3 axis, 2 hours per axis, 45 Hz sweep, IL change ≤ 0.1 dB
Impact: Height: 1.5 m, 8 times drop test, IL change ≤ 0.1 dB
Compression: Load: 5 N, Load time: 1 min, IL change ≤ 0.1 dB
Torsion: Load: 15 N; 10 times per minute, 100 times, IL change ≤ 0.1 dB
Tension: 20 N, online test, 40 N, offl ine test, last for 2 mins, IL change ≤ 0.1 dB
Re-open: 5 times, IL change ≤ 0.1 dB
Ordering Information
43
FTTX Solutions
5.5 3M™ One Pass Mini Fibre Pathway LSZH
5 FTTH Connectivity
• 3M™ One Pass Mini Fiber Pathway is designed for use in brownfi eld Multi Dwelling Units (MDUs) or Single Family Units (SFUs) serviced by FTTH networks
• Also suitable for hotels, schools, hospitals, and small businesses
• The One Pass Mini pathway is a single fi ber fl exible, surface-mount cable pathway and drop cable solution installed in just one pass
• Used to connect to hallway distribution cables from a point-of-entry location near an apartment door to a wall outlet in the living unit positioned near an ONT
• Utilizes 3M adhesive technology to adhere duct to wall
• Compatible with a variety of wall surfaces
• Suitable for indoor use only as LSZH material
• Low smoke zero halogen construction
3M™ One Pass Small Surface-Mount Point-of-Entry Box SM-SMALL-POE-10-IV and 3M™ No Polish Con-nector 8800-APC/AS
3M™ One Pass Mini Fibre Pathway Duct
Feature
• One Pass Mini pathway is low profi le and less obtrusive than existing drop cable solutions
• One Pass Mini pathway facilitates use of small desktop ONTs
• 3M™ One Pass Mini Fiber Pathway Duct was designed to work on concrete walls where stapling ruggedized drop cables isn’t an option
• Use of adhesive technology to mount One Pass Mini Duct enables quiet installation, maintains signal integrity, and eliminates marks left on ceilings from staple guns
• One Pass Mini has few pieces to install
• One Pass Mini pathway is compatible with the 3M™ One Pass Fiber Pathway for horizontal cable applications
• Duct can be cut to needed length and quickly and easily fi eld terminated with 3M™ No Polish Connector
Benefi t
• Respects apartment aesthetics; a unique cable pathway solution for high-end apartments where exposed cables are not acceptable to tenants, increasing service provider revenue opportunities
• Virtually eliminates time and expense of running new wiring (electrical, RJ-11, coax) to closets where large wall mount ONTs are typically placed
• Apartments with concrete walls can now be wired for FTTH services quickly and cost effectively, increasing potential revenue for the FTTH service provider
• Provides minimally disruptive customer installation experience and preserves apartment aesthetics while reducing potential for macrobends and high attenuation that may be caused by stapling
• Installation is easy, training crews takes less time and is less costly than some traditional methods; eliminates time spent loading/unloading staple guns needed for stapling ruggedized drop cables
• Final drop cable installation time is signifi cantly reduced, and customer installation time diminished
• Limits fi ber waste and large boxes designed to store excess cable slack. Expensive and time consuming fusion splicing machines are no longer needed for terminations
44
Fibre optic Solutions
5 FTTH Connectivity
3M™ One Pass Mini Fibre Pathway
Apartment Layout and Product Placement Illustration
3M™ One Pass Mini Fibre Pathway Duct
Bedroom Living Room
Coax RJ-11 Electrical
LC
3M™ One Pass Fibre Pathway or Alternative Horizontal Cable Pathway Solution
3M™ One Pass Mini Fibre Pathway
LSZH One Pass MiniLSZH One Pass 2
Fiber MiniLSZH One Pass 4
Fiber Mini
Number of Fibers 1 2 4
Fiber coating 900 µm 250 µm 250 µm
Fiber coating color white blue, orangeblue, orange, green,
brown
Fiber type Ultra bend insensitive fi ber (ITU G.657.B3)
Jacket material Low smoke zero halogen polyolefi n
Jacket colour Ivory
Jacket paint ability Paintable with either latex or oil based paint
Flammability Fiber pathways has been tested to the requirements of IEC 60332-3-25 and IEC 61034-2, with modifi ed test procedures. Note 1
LSZH Fiber pathways have been tested to the requirements of IEC 60754-2
Installation Temperature 16°C to 38°C and 30-50% relative humidity. Notes 2,3
Storage TemperatureThe product should be stored at 4°C to 38°C and 0-95% relative humidity. The optical product storage conditions are 22°C and 50% relative humidity. Failure to properly store the product may void the product warranty.
Operating Temperature 4°C to 38°C and 0-95% relative humidity
UV Resistance Installed duct tested to indoor UV requirements of ASTM G 154
Notes1 Since this product is designed to be affi xed to a wall in application, the fi ber pathway was tested pursuant to
IEC 60332-3-25 and IEC 61034-2 after being adhered to a sheet rock wall or a metal strip.2 Allow fi ber pathways and accessories to acclimate for 24 hours at recommended product installation temperature prior to
install.3 For optimum curing of the adhesive, hold recommended installation temperature conditions for 72 hours after.
1 Fibre Duct
3M Adhesive
0.32" (8.1 mm)
0.13" (3.4 mm)
900 µm Ultra Bend Insensitive Fibre
(G.657.B3)
45
FTTX Solutions
Description Reference No. MOQ
ONE PASS MINI DUCT LSZH 100 m NO TERM ILU-300-01-000-LS 1 Spool
ONE PASS MINI DUCT LSZH 100 m 2 fi bres NO TERM ILU-300-02-000-LS 1 Spool
ONE PASS MINI DUCT LSZH 100 m 4 fbres NO TERM ILU-300-04-000-LS 1 Spool
5 FTTH Connectivity
3M™ One Pass Mini Fibre Pathway Duct Wall Surface Compatibility Test Results
Wall Surface Type Pass
Painted Smooth Surfaces
Flat Latex Yes
Semi-gloss Latex Yes
Glossy Latex Yes
Semi-gloss Alkyd Yes
Painted Textured Surfaces: Light Stucco & Cement Block
Flat Latex Yes
Semi-gloss Latex Yes
Glossy Latex Yes
Semi-gloss Alkyd Yes
Wallpapered Surfaces
Plain Paper Yes
Vinyl Coated Yes
Vinyl Yes
Polyolefi n Woven No
Unfi nished and/or Unpainted Brick, Concrete, or Block No
3M™ One Pass Mini Surface-Mount Point-of-Entry Wall Cover
3M™ One Pass Mini Surface-Mount Wall Outlet
3M™ One Pass Mini Surface-Mount Wall Outlet and 3M™ No Polish Connector 8800-APC/AS
Ordering Information
3M™ One Pass Mini Fibre Pathway Duct
46
Fibre optic Solutions
5 FTTH Connectivity
3M™ One Pass Mini Fibre Pathway Product Accessories
Ordering Information
Description Reference No. MOQ
One Pass Mini Surface-Mount Wall Outlet, 2F ILU-SM-WO-02-SCA-IV 60
One Pass Mini Surface-Mount Wall Outlet, 2F ILU-SM-WO-02-SCU-IV 60
One Pass Mini Surface-Mount POE Wall Cover ILU-SM-POE-WC-IV 60
One Pass Mini Planar Corners, 12 Corners Per Bag ILU-PLN-12-IV 60
One Pass Mini Mechanical Anchor, 12 Per Bag ILU-ANCHOR-12-IV 60
One Pass Mini Exterior Corner Supports, Formed (Metal), 12 Per Bag
ILU-EXT-12 60
One Pass Mini Bridge Strip 31 cm Long 60 Per Kit ILU-BRIDGE-125-60 60
One Pass Mini Duct Installation Tool ILU-DUCT-INSTALL-TOOL 4
One Pass Mini Duct Flange Removal Tool ILU-DUCT-CHOMPER-TOOL 4
One Pass Mini Installation Tool Kit, ILU ILU-TOOL-KIT 1 Kit
ILU Fiber Repair Kit ILU-REPAIR-KIT 1
ILU Wall Surface Compatibility Test Kit ILU-TEST-KIT 1
One Pass Surface-Mount Point-of-Entry Box SM-POE-10-IV 60
One Pass Small Surface-Mount Point-of-Entry Box SM-SMALL-POE-10-IV 60
3M™ No Polish Connector SC/APC SM Angle Splice 250/900 8800-APC/AS 60/Package
3M™ No Polish SC Connector SM Plug 250/900 (blue housing)
8800 60/Package
Fiber Optic Angle Cleave Kit with Angle Cleaver 2565 1/Package
Fiber Optic Angle Cleaver 2535 1/Package
Fiber Optic Flat Cleaver 2534 1/Package
Optical Terminal Box with 2 SC adapters N501688A 10
Optical Terminal Box with 4 SC adapters N501689A 10
47
FTTX Solutions
IndexDescription Reference No. Page
RFO NG - Pre wired module 12 SC/APC G652D N541133A 11
RFO NG - Pre wired module 12 SC/UPC G652D N541181A 11
RFO NG Symetric - Prewired Module 12 SC/APC G652 N541193A 11
RFO NG - Pre wired module 12 SC Multi-mode OM3 N541199A 11
RFO NG - 1000 m reel of tube D5/3 N581203A 11
RFO NG - 25 m reel of tube D5/3 N581207A 11
Protective patchcord holder for RFO NG symetric tray N671317A 11
RFO NG - Breakout Housing DEECAM D18 for 24 D5/3 N711547A 11
RFO NG - Breakout Housing DEECAM D25 for 60 D5/3 N711597A 11
RFO NG - 12-drawer chassis 144 fi bres (without module) N711747A 11
RFO NG - 6-drawer chassis 72 fi bres (without module) N711748A 11
RFO NG - Frame 3.25 m - 11 levels N801584A 11
RFO NG - Frame 2.00 m - 6 levels N801585A 11
RFO NG - Frame 2.50 m - 8 levels N801595A 11
MODF 2K-19” chassis, 3U 40026-515 30 12
MODF 2K-Tray 19”, 1U, tube management 40040-502 30 12
MODF 2K Cover 3U, 7TE 40018-018 30 13
MODF 2K-Horizontal guide drawer, 19” , 1U 40036-521 30 13
MODF Module 2K/7TE-SM-SC/APC G652D 40395-514 45 13
MODF Splice module 2K/8TE-24 splices 40395-517 30 13
MODF Module 2K/7TE-SM-SC G652D 40395-546 45 13
ECAM Single S4-27 for BPEO S4 - One single entry D4 - 27 80611329493 14
ECAM Double D4-27 for BPEO S4 - One double entry D4 - 27 80611329527 14
BPEO S4 - Dome Sleeve for 864 FO max - One double entry D4 - 27 + 5 x single entries D4 - 27 N501675A 14
BPEO S4 Wall support N711660A 14
BPEO-3 EVOL CDP 48 SLOT Splice protection closure CDP N501494A 16
BPEO-3 EVOL EDP 48 SLOT Splice protection closure EDP N501495A 16
BPEO-3 EVOL BDP 48 SLOT Splice protection closure BDP N501496A 16
Earthing kit for BPE/O N151064A 16,18
BPEO Wall or Pole mounting kit BPEO sizes 2 and 3 N711440A 16,18
BPE/O Sewer type mounting kit sizes 2 and 3 N711546A 16,18
BPEO Wall mounting kit V2 for BPEO size 2 and 3 N711600A 16,18
ECAM Double D5-27 Double cable entry kit with diameter from 5 to 27 mm N721131A 16,18
Coupling holder 6 x SC connectors for BPEO S1, S2, S3 N711604A 16,18,22
ECAM Single S5-18 Single cable entry kit with diameter from 5 to 18 mm N721127A 16,18,20,22
K7-1SLOT-6 Fibrlok™ 4 x 4 - 1-step Cassette equipped with a 6 Fibrlok™ 4 x 4 support N541103A 16,18,20,22,25
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter
N541104A 16,18,20,22,25
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices N541106A 16,18,20,22,25
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped with a 12 Fibrlok™ 4 x 4 support N541108A 16,18,20,22,25
K7-2SLOT-10 Fibrlok4 x 4 and splitter 2-step Cassette equipped with a 10 Fibrlok™ 4 x 4 support N541110A 16,18,20,22,25
K7-1SLOT - For 9 fusion splices and a 4 x 4 type PLC splitter N541113A 16,18,20,22,25
Description Reference No. Page
K7-2SLOT-Universal for 12 splices N541121A 16,18,20,22,25
ECAM Single S4-12 Single cable entry kit with diameter from 4 to 12 mm N721126A 16,18,20,22,25
Coupling holder 12 x SC connectors for BPEO S2, S3 N711605A 16,18,22
ECAM Double D5-20 Double cable entry kit with diameter from 5 to 20 mm N721130A 16,18,22
ECAM Extended S12 - 12 x 1.5 for 12 x 1.5 mm cables N721140A 16,18,22
ECAM Extended S18 - 7 x 5.5 mm for 7 x 5.5 mm cables N721141A 16,18,22
ECAM Extended S12 - 10 x 2 mm for 10 x 2 mm cables N721142A 16,18,22
ECAM Extended S12 - 4 x 4 mm for 4 x 4 mm cables N721146A 16,18,22
BPEO-2 EVOL CDP 28 SLOT Splice protection housing CDP N501491A 18
BPEO-2 EVOL EDP 28 SLOT Splice protection housing EDP N501492A 18
BPEO-2 EVOL BDP 28 SLOT Splice protection housing BDP N501493A 18
K7-1SLOT-2 x 6 fusion splices (twin-zone) designed for fi bre G657 (lot of 12 pcs) N541182A 20,22,25
BPEO - 1.5 FDP Branch N501747A 20
BPEO - 1.5 FDP Drops N501751A 20
Double D6-18 ECAM for cable entry kit Body for housing double cable entry kits N721162A 20,22,25
ECAM Double ECAM D6-9 mm Sealing kit with diameter from 6 to 9 mm N721163A 20,22,25
ECAM Double D9-12 mm Sealing kit with diameter from 9 to 12 mm N721164A 20,22,25
ECAM Double D12-15 mm Sealing kit with diameter from 12 to 15 mm N721165A 20,22,25
ECAM Double D15 to 18 mm Sealing kit with diameter from 15 to 18 mm N721166A 20,22,25
Single ECAM S3-7 Single cable entry kit with diameter from 3 to 7 mm N721171A 20,22,25
Single ECAM S3.5-9.5 Single cable entry kit with diameter from 3.5 to 9.5 mm N721172A 20,22,25
ECAM Double D18 - D4,5/6 for cable entry kit Body for housing double cable entry kits N721162B 20,25
ECAM Double D4,5-6 mm Sealing kit with diameter from 4,5 to 6 mm N721176A 20,25
BPEO - 1 Evol EOC N501487A 22
BPEO - 1 Evol CDP N501488A 22
BPEO - 1 EDP N501489A 22
BPEO - 1 FDP Drops N501714A 22
BPEO - 1 FDP Branch N501719B 22
BPE/O Pole 1 Wall or Pole mounting kit BPEO size 1 N711438A 22
BPE/O Wall and pole mounting kit V2 for BPEO size 1 N711599A 22
Empty micro-sleeve for passage cable diameter 4.2 mm or 11 mm. Plugs on outlets N501600A 23
Micro-sleeve 24 for passage cable diameter 4.2 mm or 11 mm. 2 off 4 x 2.5 mm outlets N501604A 23
BPEO-0 EVOL Splice Protection Housing N501741A 25
Derivation closure OSSC 121T N501425A 26
Derivation closure OSLC 222 N501426A 26
Derivation closure OSSC 122T N501454A 26
Derivation closure OSC30 N501652A 26
48
Fibre optic Solutions
Description Reference No. Page
Fibre Distribution Terminal PBO NG T1 Supplied without cassette N501733A 27
PBO Plastic mounting bracket (need 1) N711608A 27
Empty FTB distribution housing FTB-M 28
Base of building housing PBO S2 12 SLOT N501659A 29
PBO Plastic fi xing supports (need 2) N711608A 29
eDB² Base Assembly 537069 30
eDB² Accessory (Dropfi x) Contact 3M 30
eDB² Accessory Pack 1 Contact 3M 30
PBPO 24 NG Symetric - External drops immobilisation N501758A 31
PBPO Protection Cover N681288T 31,32
PBPO Kit backmount plate N711833A 31,32
PBPO/C NG Symetric N501760A 32
Wall outlet equipped with 4 connectors with fl aps and 2 pigtails N501677A 34
Wall outlet equipped with 4 fl ap connectors on 4fo cable 25 m of which 2fo connect. SC/APC N501680A 34
Wall outlet equipped with 4 fl ap connectors on 4fo cable 40 m of which 2fo connect. SC/APC N501681A 34
Wall outlet equipped with 2 fl ap connectors on 2fo cable 25 m of which 2fo connect. SC/APC N501682A 34
Wall outlet equipped with 2 fl ap connectors on 2fo cable 40 m of which 2fo connect. SC/APC N501683A 34
Wall outlet equipped with 4 connectors with fl aps N501689A 34
Wall outlet equipped with 4 fl ap connectors on 4fo cable 25 m of which 4fo connect. SC/APC N501762A 34
Wall outlet equipped with 4 fl ap connectors on 4fo cable 40 m of which 4fo connect. SC/APC N501763A 34
Wall Outlet 2 FO equipped with a fl ap connector N501752A 35
Wall Outlet Point equipped with 2 connectors with fl aps N501753A 35
Wall Outlet 2FO equipped with 2 connectors with fl aps and 1 pigtail N501754A 35
Fibre Optic Wall Outlet 4 x SC simplex with Keystone Port for RJ45 Jack 8686 36
Fibre Optic Wall Outlet 2 x SC simplex with Keystone Adpater and Dust Shutters VOL-0256-C 37
Fibrlok and NPC Angle Splice Kit with 2535 Angle Cleave Tool 2565 39
No Polish Connector Preparation Kit without Cleaver 8865 39
SC/APC SM 9/125 µm NPC Connector 250/900 µm, Angle Splice, incl. tool 8800-APC/AS 39
SC/APC SM 9/125 µm NPC Connector 250/900 µm, Flat Splice, incl. tool 8800-APC/FS 39
SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm jacket and FRP, Angle Splice
8802-T/APC/AS/1.6-3.0 39
SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm jacket and FRP, Flat Splice
8802-T/APC/FS/1.6-3.0 39
LC/APC SM 9/125 µm NPC Connector 250/900 µm, Angle Splice, incl. tool 8830-APC/AS 39
LC/APC SM 9/125 µm NPC Connector 250/900 µm, Flat Splice, incl. tool 8830-APC/FS 39
LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm jacket and FRP, Flat Splice 8832-APC/AS 39
LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm jacket and FRP, Angle Splice 8832-APC/FS 39
No Polish Connector Preparation Kit with Cleaver 8865-C 39
Description Reference No. Page
Crimplok™ + Connector SC/APC, SM, 900 µm, (60ea) with PS Tool 8700-PS/APC 40
Crimplok™ + Connector SC/UPC, SM, 900 µm, (60ea) with PS Tool 8700-PS/UPC 40
Crimplok™ + SC/APC Connector Kit 8765-APC 41
Crimplok™ + SC/UPC Connector Kit 8765-UPC 41
Fibrlok II Universal Flat Fiber Splice, 250 µm and 900 µm (4 x 6 mm) 2529 42
Fibrlok Fiber Prep Kit (w/o Cleaving Tool) w/ 2501, 2504-G and Fibrlok samples 2559 42
Fibrlok II Angle Fiber Splice, 250 µm and 900 µm (4 x 6 mm) 2529-AS 42
Fibrlok 250 µm Angle Fiber Splice (4x4mm) 2540-AS 42
Fibrlok 250 µm Flat Fiber Splice (4x4mm) 2540-G 42
Fibrlok Fiber Prep Kit (w/ Cleaving Tool CI-01A), 2501, 2504-G and Fibrlok samples 2559-C 42
FRP Splice Connector (Grey) 2569 43
FRP Splice Connector (Ivory) 2569 43
ONE PASS MINI DUCT LSZH 300 ft NO TERM ILU-300-01-000-LS 46
ONE PASS MINI DUCT LSZH 300 ft 2 fi bres NO TERM ILU-300-02-000-LS 46
ONE PASS MINI DUCT LSZH 300 ft 4 fbres NO TERM ILU-300-04-000-LS 46
One Pass Mini Surface-Mount Wall Outlet, 2F ILU-SM-WO-02-SCA-IV 47
One Pass Mini Surface-Mount Wall Outlet, 2F ILU-SM-WO-02-SCU-IV 47
One Pass Mini Surface-Mount POE Wall Cover ILU-SM-POE-WC-IV 47
One Pass Mini Planar Corners, 12 Corners Per Bag ILU-PLN-12-IV 47
One Pass Mini Mechanical Anchor, 12 Per Bag ILU-ANCHOR-12-IV 47
One Pass Mini Exterior Corner Supports, Formed (Metal), 12 Per Bag ILU-EXT-12 47
One Pass Mini Bridge Strip 12.5” Long 60 Per Kit ILU-BRIDGE-125-60 47
One Pass Mini Duct Installation Tool ILU-DUCT-INSTALL-TOOL 47
One Pass Mini Duct Flange Removal Tool ILU-DUCT-CHOMPER-TOOL 47
One Pass Mini Installation Tool Kit, ILU ILU-TOOL-KIT 47
ILU Fiber Repair Kit ILU-REPAIR-KIT 47
ILU Wall Surface Compatibility Test Kit ILU-TEST-KIT 47
One Pass Surface-Mount Point-of-Entry Box SM-POE-10-IV 47
One Pass Small Surface-Mount Point-of-Entry Box SM-SMALL-POE-10-IV 47
3M™ No Polish Connector SC/APC SM Angle Splice 250/900 8800-APC/AS 47
3M™ No Polish SC Connector SM Plug 250/900 (blue housing) 8800 47
Fiber Optic Angle Cleave Kit with Angle Cleaver 2565 47
Fiber Optic Angle Cleaver 2535 47
Fiber Optic Flat Cleaver 2534 47
Optical Terminal Box with 2 SC adapters N501688A 47
Optical Terminal Box with 4 SC adapters N501689A 47
49
50
Notes
3
3M Telecommunications Europe, Middle East & Africa c/o 3M Deutschland GmbHCarl-Schurz-Str. 1 D-41453 Neuss GermanyTel.: ++49(0)2131/14-5999 Fax: ++49(0)2131/14-5998Internet: www.3MTelecommunications.com/eu
Important Information
The details contained in this literature have been carefully prepared from information available to 3M at the time of its production. However, it is not intended to be relied upon for purposes of product specification and you should contact your sales representative if specification details are required. All questions of liability relating to 3M products are governed by the selling 3M subsidiary’s Terms of Sale subject where applicable to the prevailing law. 3M and Fibrlok are trademarks of the 3M company.
Printed in Germany.© 3M Dr. Nr. 07-401-31800 Index c Revision 05.2014. All rights reserved.
Important NoticeThe mounting and use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be assembled by a competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application.
All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or environment. Any action or usage of this product made in violation of this document is at the risk of the user.
Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M Company (who cannot verify or control these elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control.
Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation.
top related