solenoid valves and pumps
Post on 18-Dec-2021
4 Views
Preview:
TRANSCRIPT
www.cemegroup.com
1
www.cemegroup.com
Beverage
ww
w.c
emeg
roup
.com
Coffee Beverage RefrigertationAir-conditioning
Steam Medical WeldingWater
Management Other-Industrial
Water beverage solenoid valves and pumps
BeverageBeverage
1
Beverage
CEME introduces its wide range of components dedicated to beverage system.
These products have been designed by CEME with the aim of bringing innovative
solutions and high quality components for Water Refrigerator system as well as
Reverse Osmosis System for drinkable water.
CEME has put in place its decades of experience in developing products in compliance
with the most relevant norms related to potable water and food grade.
Beverage
www.cemegroup.comwww.cemegroup.comwww.cemegroup.com
• SOLENOID VALVE - quick connection for cold and hot water
• DISPENSING VALVE - 2 or 3 Inlet & 1 Outlet
• PERIPHERAL PUMP FOR CARBONATOR• SOLENOID PUMP
CEME, SOLENOID PUMPS AND VALVES
Electro-pumps, solenoid valves,
pressure switches, fl ow meters for a
perfect fl uid control
Established in 1974, CEME is now a landmark
of reference for industrial pumps and valves
production in Italy and throughout the world.
Over the years, the company has diversifi ed
its product range and their applications
enriching its array of electro-pumps, solenoid
valves, pressue switches, fl ow meters and other
components to properly control the passage of
any type of fl uid: water, gas, steam, air.
CEME is renowned for its technical engineering
know-how, quality, fl exibility and for the
distinctive ability to develop innovative solutions
for customers on the Italian and international
markets. Technology needs control.
BeverageBeverage
32
www.cemegroup.com
GENERAL FEATURES
Hydraulic body: Thermoplastic PA66 30%FV
Inlet / Outlet: John Guest 4/6/8mm - 1/4’’
Sealing on the mobile core: VITON rubber for alimentary use
Overall dimensions: according with the drawing of the model
Electrical connections: 6,3 x 0,8 fast-on terminals
Electrical insulation class I: according with EN 60 335-1
Operation: Direct Acting
Working pressure: 0-8 bar
Internal hole: 2,5mm
GENERAL FEATURES
Hydraulic body: Thermoplastic PA66 30%FV
Inlet / Outlet: John Guest 4/6/8mm - 1/4’’
Sealing on the mobile core: VITON rubber for alimentary use
Overall dimensions: according with the drawing of the model
Electrical connections: 6,3 x 0,8 fast-on terminals
Electrical insulation class I: according with EN 60 335-1
Operation: Direct Acting
Working pressure: 0-8 bar
Internal hole: 2,5mm
V791 - 2/2 WAY - NC V730 - NC 2 Inlet - 1 Outlet
6122
60
A
A
(44,
9)
(69,8)
(59,
7)
www.cemegroup.com
BeverageBeverage
www.cemegroup.com
5
www.cemegroup.com
4
BeverageBeverage
GENERAL FEATURES
Hydraulic body: Thermoplastic PA66 30%FV
Inlet / Outlet: John Guest 4/6/8mm - 1/4’’
Sealing on the mobile core: VITON rubber for alimentary use
Overall dimensions: according with the drawing of the model
Electrical connections: 6,3 x 0,8 fast-on terminals
Electrical insulation class I: according with EN 60 335-1
Operation: Direct Acting
Working pressure: 0-8 bar
Internal Hole: 2,5mm
Holes for fi xing
GENERAL FEATURES
Hydraulic body: Thermoplastic PPA
Inlet / Outlet: Quick connection AVS Römer 4/6/mm
Sealing on the mobile core: VITON rubber for alimentary use
Overall dimensions: according with the drawing of the model
Electrical connections: 6,3 x 0,8 fast-on terminals
Electrical insulation class I: according with EN 60 335-1
Operation: Direct Acting
V796 - 2/2 way - NCV731 - NC3 Inlet - 1 Outlet
A
A
(44,
9)
(94,8)
(59,
7)
Orifi ce sizemm
Flowm3/h
MOPD (bar)***AC DC
1.0 0.03 25 231.2 0.04 23 201.5 0.07 17 152.0 0.10 13 92.5 0.12 9 6
47,9
8,5
1116
,5
56,4
10 12
46,6
25
17
25
INLET
Push-in fi ttingAVS Roemer for Ø4 hose
N. 2Ø3.2x10
(fi xing point)
Ø 3,5mmHole
B ( 1 : 1 )
B
22
19
14
www.cemegroup.com
7
www.cemegroup.com
6
BeverageBeverage
MAIN TECHNICAL FEATURES
Materials:
Pump Body: PEI reinforced, FDA-NSF approved
Shaft: Stainless steel AISI430FM
Impeller: PPS/PEEK reinforced, FDA - NSF approved
Mecanichal Seal: Ceramic/graphite/NBR -NSF Approved
Seals: EPDM or NBR FDA approved
NSF approving for the complete pump: in progress
WORKING CONDITIONS:
Ambient T°: -10° / 50°C
Fluid T°: -10° / 80°C
Duty: 100% ED. Suitable for use with water and low corrosive / abrasive fl uid
Max. allowable pressure: 12,5 barg ( 185 psi )
Note: The inlet pressure must be add on the above performance curve with the relative effect on the fl ow rate.
Suction Head: 150 mm. before priming, 2000 mm. after priming. In case of different conditions please contact our TEC dep. for a feasibility request
Executions
Standard: Horizontal installations with a 50cm of electrical cable and a G.3/8 “Male, facing up.Other confi gurations are available, contact our TEC dep. for a feasibility request.A balanced settable by-pass valve is also available.
MTP 700 Peripheral pump
MTP 700 Peripheral pump
Motor:Standard: Single or Three phase induction motor 250W – 230V– 50Hz - 2800rpm – IP00 with capacitor and thermal protection 140°C insulation class F/B, Fan cooled.Other voltages , frequencies and confi gurations are available, contact our TEC dep. for a feasibility request.
121,
5
1022
5
134127
IN By-pass adjustment screw
A-A ( 1 : 2 )
7
36
90
7060 27.5 67.5
==
112
OUT
AA
N°2 G.3/8
NOTE: Hydraulic characteristics obtained with waters at 20° C at pump nominal speed. Working tolerance on Hydraulic and Electrical characteristics is ± 10%
14
12
10
8
6
4
2
00 100
13
190
160
130
100
72
43
14
40 66 92 120 145
200 300 400 500 600 L/h
gph
psi barg
FLOW RATE
CEME PUMP MTP700 PERFORMANCE CURVE
PRES
SUR
E
“50Hz”
“60Hz”
60Hz +3bar inlet
www.cemegroup.com
9
www.cemegroup.com
8
BeverageBeverage
• Electrical insultaion class II
• Diode integreted (except for 24V)
• Approvals: VDE, IMQ, c Ul
• Voltages: 100V / 50-60Hz - 120V / 60Hz - 220V 50Hz - 230V 50Hz - 240V 50Hz - 24V 50-60Hz
EP 5Solenoid pump
EP 5Solenoid pump
Description
Technical data
Body material PA66/POM
Seal material NBR (OTHER MATERIAL AVAIALABLE ON REQUEST
Electrical connection 6,3 x 0,8 fast-on terminal
Insulation class F
122
1850
55
1/8" Gas
Min
7 14O
12CH
54,3
13,5O
6,3 x 0,8 (x2)
74,5
O 7,2
55
13,2O
4,5
4,5
Pressure(bar)
Average Flow Rate (cc/min)
E4 E5 E7 E4R
0 450 650 1050 350
2 315 520 650 230
4 260 420 400 180
6 240 350 180 110
7 230 330 0 80
8 220 300 - 50
10 200 210 - 0
12 160 140 - -
14 130 60 - -
15 100 0 - -
17 40 - - -
19 0 - - -
10
Beverage
CEME SPAUffi ci e StabilimentoVia Garibaldi, 6320061 Carugate (MI)
Ph. +1 440 2263200 Fax +1 440 4244970
CEME ZHONGSHAN CO.LTDIndustrial Road, nr.38 528415 Xiaolan Town, Zhongshan City, Guangdong Province, P.R. China
CEME USA33801 Curtis Blvd, nr.11044095 Eastlake, OHIO
Ph. +86 760 22288986 Fax +86 760 2288987
Tel. +39 02 921568 1Fax +39 02 92150220ceme@cemegroup.comwww.cemegroup.com
ww
w.c
emeg
roup
.com
Water beverage solenoid valves and pumps
Coffee Beverage RefrigertationAir-conditioning
Steam Medical WeldingWater
Management Other-Industrial
top related