smart non-default routing for clock power reduction

Smart Non-Default Routing for Clock Power Reduction

Andrew B. Kahng , Seokhyeong Kang, Hyein Lee

DAC’13

Outline

• Introduction• Problem Formulation• Algorithm• Implementation Flow• Experimental Results• Conclusions

Introduction

• non-default routing rules (NDRs) have become an integral element of clock tree synthesis (CTS) methodology as a means of reducing electromigration (EM) violations and delay variations.

Introduction

Introduction

Introduction

Introduction

Problem Formulation

Problem Formulation

• RC modeling of wire is given by Equation (2), where le , we and se are the length, width and spacing of edge e, respectively.

Problem Formulation

Problem Formulation

• We use the Elmore delay model [8] to calculate the delay of clock tree.

Problem Formulation

• For wire slew calculation, we apply the PERI model [10]. The slew at node v, where s is the clock source.

Problem Formulation

• The skew constraint should be checked for all pairs of source-to sink timing paths with the upper bound Uk.

Problem Formulation

• For EM constraints, we use a simplified IRMS model derived from Black’s Equation [12].

Algorithm-Iterative LP

Algorithm

Algorithm

Implementation Flow

Experimental Results

• We use the Synopsys 32/28nm PDK cell library• We synthesize the designs using Synopsys

Design Compiler vF-2011.09• place-and-route with Cadence Encounter DIS

v10.1• We solve the wire sizing problem formulated

above using Mathworks MATLAB R2012b

Experimental Results

Experimental Results

Experimental Results

Conclusions

• In this work, we have assessed the potential for capacitance and power reduction from “smart NDRs” that substitute narrower-width NDRs for selected clock segments while maintaining all skew, slew, insertion delay and EM reliability criteria.