smart details insert detailsattachments.aga-cad.com/files/common/a0bc387bf55885cff8b76ac… ·...
Post on 05-Jun-2020
9 Views
Preview:
TRANSCRIPT
SMART DETAILS
Insert Details
Insert Details
After you prepared your configurations
you can insert details using Insert
Details command.
Elements which can be used for cuts
and details are point and line based
families of such categories:
Generic Model, Structural Framing
and Structural Connections.
Insert Details
There are two ways to insert details:
select elements and click Insert
Details;
select Insert Details command,
and then select category of
elements or individual element.
Choose Insert Elements command
Select element and then
choose Insert Elements
command
Insert Details by Selected Element
If you select elements and Insert
Details afterwards, you will see
Insert Details window.
Select Smart Details Configuration
from pop-up window or click Edit...
button to adjust configurations.
If you are satisfied with selected
configuration – select Insert
Details and watch elements being
inserted.
Insert Details by Category
If you selected Insert Details
and one of the categories
available in your project – you
will see such window with all
elements of this category.
Here you can see status of all
elements, edit, update, and
insert details to selected
elements.
AGA CAD Ltd
T: +370 618 55671 | E: support@aga-cad.com | W: www.aga-cad.com
top related