slop fire boiler by isgec

Post on 14-Apr-2017

187 Views

Category:

Engineering

23 Downloads

Preview:

Click to see full reader

TRANSCRIPT

Slop Fire Boilers Made by ISGEC

Parts of Slop Boiler

Feeder:There are two feeder system i.e. Screw and drag chain feeder.

Water wall:Where the water pipes originates

Super heater:Two super heaters are used , primary and secondary.

APCD:Air pollution control device

FD AND ID:Forced draft and Induced draft.

Economizer:Preheat the water for steam generation.

Air Heater:Preheat the air to be supplied into furnace.

Chimney:Outlet from where gas leave the plant and comes into environment.

Design Features

Flexibility of fuels:Wide variety of fuels supported like Bagasse, Rice husk, wooden chips, coal

Minimum maintenance:Familiar technology and easier to operate.

Enhanced up-time:Continuous ash discharge and elimination of clinker formation.Complete combustion:High pressure atomization spray to ensure complete combustion in tall furnace.Reliable and efficient on-load cleaning:Steam operated soot blowers for super heater and other convective heating surface in horizontal pass to ensure cleaning without stoppage.

RAW MATERIAL USED

• Liquid effluent (spent wash) generated from the distillery process.

• Slop (concentrated spent wash)

• Bagasse (left after taking the juice out of sugarcane)

• Wooden Chips

• Coal if available can also be used

Thank You

top related