sl7000_tc_inst_guide_03_03.pdf
Post on 03-Apr-2018
220 Views
Preview:
TRANSCRIPT
-
7/27/2019 SL7000_TC_INST_GUIDE_03_03.pdf
1/6
SL7000 Transformer
Connected Version
Installation Guide
-
7/27/2019 SL7000_TC_INST_GUIDE_03_03.pdf
2/6
SL7000 Transformer Connected Version
Installation Guide
-
7/27/2019 SL7000_TC_INST_GUIDE_03_03.pdf
3/6
SL7000 TC Installation Guide
1
Mounting:The meter is intended to be mounted on a metering panel.
Dimensions and mounting points (all in mm):
The net weight is approximately 1.9kg.
Connection:Safety warning:switch off network supply before connecting the meter.Unscrew the terminal cover and connect the wires according to the following drawing.
Main connections:The terminals permit the connection of solid or stranded wires (terminal diameter 9.4mm, 2 x M6 screwsper terminal. For aluminium cables (multi-strand), the use of a tin-plated copper sheath on each conductoris compulsory to avoid corrosion and terminal.
The configurable parameter of the meter is able to define if it is connected to a three-wire system or a four-wire system.
180 85
150
SL7000
-
7/27/2019 SL7000_TC_INST_GUIDE_03_03.pdf
4/6
SL7000 TC Installation Guide
2
*
Installation on the network (four-wire systems)
Installation on the network (three-wire systems)
RS232RJ45
RS485RJ45
The type of connection hardware depends on themeter type
If the meter is configuredfor a four-wire connection,Aaron connection ispossible for usage with athree-wire system.
OFF
ONBAT
L1L2L3N
S
P
P P P
S S S
option : APS*
L1L2L3
S
P
P P
S S
option : APS*
-
7/27/2019 SL7000_TC_INST_GUIDE_03_03.pdf
5/6
SL7000 TC Installation Guide
3
Inputs & Outputs (Flexible I/O board):Auxiliary terminal: cables up to 1.4mm2 for pulses, and up to 2.55mm2 for controls.
Inputs & Outputs (Intermediate I/O board):
Programming date and time:Press the display push button several times, until the date (respectively the time) is displayed.
Press the reset button to allow programming, digit by digit, with the display button (the digit to be modifiedwill blink), move to the next digit by pressing the reset button.
When all the digits are set, press the reset button twice to activate the new date or time.
11 2
Control Outputs
(1 to 4)
3 4 5 22 3 4 5 6
RJ45Customerport
RJ45Utilityport
1 2 3 4Pulse Outputs
(1 to 6)
Pulse Inputs
(1 to 4)
1 2
Control
Inputs
(1 to 2)
11 2
Control Outputs
(1 to 2)
3 4 5 22 3 4 5 6
RJ45Customerport
RJ45Utilityport
1 2 3 4Pulse Outputs
(1 to 2)
Pulse Inputs
(1 to 2)
1 2
Control
Inputs
(1)
-
7/27/2019 SL7000_TC_INST_GUIDE_03_03.pdf
6/6
Actaris SAS
ZI de Chass ene uil - Avenu e d es Temps Modern es
86361 Chasseneuil du Poitou cedex - France
For more information, see www.actaris.com
t e l +33 5 49 62 70 00
fax +33 5 49 62 70 89
EL-0041.0-GB-02.03-C
opyright2002,Acta
ris.AllRightsReserved.-Actarisreservestherighttochangethese
specificationswithoutpriornotice.
top related