skf tkti · the micro-sd card: a) take the micro-sd card out of the camera and insert into a...

SKF TKTIThermal Camera Software

Instructions for use

3SKF TKTI Thermal Camera Software

1. Introduction.....................................................................................................41.1 InstallingandstartingtheSoftware.......................................................................... 5

2. UsageNotes.....................................................................................................6

3. ImageProperties..............................................................................................73.1 LoadingimagesfromtheCamera.............................................................................. 73.2 LoadingimagesfromthememoryCard.................................................................... 8

4. ImageSelection................................................................................................94.1 Foldercreation............................................................................................................... 94.2 Imageloading...............................................................................................................104.3 Imageselection............................................................................................................10

5. ImageAnalysis...............................................................................................115.1 Imageselection............................................................................................................115.2 Interfacedescription....................................................................................................12 5.2.1 Span/levelandcolourpalette.......................................................................12 5.2.2 MinimumandMaximumTemperature.......................................................13 5.2.3 ImageDetailsandProperties.......................................................................14 5.2.4 TextFields........................................................................................................155.3 AnalysisTools................................................................................................................16 5.3.1 Spottemperatures.........................................................................................17 5.3.2 Areas:Rectangles,CirclesandLines...........................................................17 5.3.3 Marks,Notes,Arrows....................................................................................17

6. Reportgeneration..........................................................................................186.1 ReportCreation............................................................................................................186.2 ViewandExportReports...........................................................................................206.3 Reportlayout................................................................................................................22

7. Settings ........................................................................................................23

8. Systemrequirementsandtroubleshooting.....................................................248.1 Troubleshooting...........................................................................................................24

Tableofcontents

Originalinstructions

4 SKF TKTI Thermal Camera Software

1. Introduction

TheSKFTKTIThermalCameraSoftwareisaneasytouseWindowsbasedsoftwareforinfraredimageanalysisandreportcreation.ItcanonlybeusedwithimagestakenbytheSKFThermalCamerasTKTI21andTKTI31.ItcannotbeusedwithimagesfromotherSKFThermalCameramodels.

Thesoftwareandupdatescanbedownloadedfromwww.SKF.com.

TheSoftwarehasbeendesignedtobeeasytousewithnospecialskillsrequired,allowing:• Powerfulandquickinfraredimageanalysis.• Quickcreationofprofessionalreports.• Easilyloadingandselectionofinfraredimages.• Softwareinstallationonmanyuserscomputers.• Keyimageparameterstobeeasilymodified.• Creationandpreviewofcomprehensiveandprofessionalreportsinpdfand

wordformat.• Injustoneclick,printing,localsavingandemailingofreports.

5SKF TKTI Thermal Camera Software

1.1 InstallingandstartingtheSoftware

ToinstalltheSKFTKTIThermalCameraSoftwareontoaPC:

1. InserttheCDintothePCordownloadthesoftwarefromwww.SKF.com.2. UsewindowsexplorertoviewthefilesontheCD.3. Openandrunthefile“SKFTKTIThermalCamerasetup.exe”.4. FollowthestepstoinstallthesoftwareonyourPC.

Note:Microsoft.NETFrameworkversion4.0orlaterisrequired.Thesoftwarerequiresaminimumresolutionof1024x768.

OncethesoftwarehassuccessfullybeeninstalledaniconappearsonthePCDesktop.ThesoftwareisalsoaccessiblefromtheprogramlistintheWindowsStartmenu.

Tostartthesoftware,doubleclickonthisicon.

Figure 1 Software Icon

Thefollowingwindowwillappear:

Figure 2 Blank start screen

Note: Usethetoprighticonstominimize,maximizeorclosethesoftware.

6 SKF TKTI Thermal Camera Software

2. UsageNotes

• TheSKFTKTIThermalcamerasoftwareiscompatiblewiththeSKFTKTI21andSKFTKTI31.

• Theimagesloadedintheapplicationarecopiedlocallytotheuser’scomputer.Thispreventstheoriginalimagefrombeingcorrupted.

• TheoriginalimageisNEVERmodifiedordeletedbytheapplication.Onlythelocalcopyismodifiedandsaved.

• Theanalyzedimagesaresaved,bydefault,automaticallyeverytwominutes.• Auto-savealsosavesimageswhenanothertabisselectedandwhenthesoftwareis

closed.Itisrecommendedtokeepthisfeatureenabled. Thishelpsensurethatthemodificationsmadetotheimagearesavedintheeventa

powershortageorcomputercrash.• Onlysavedimageswillbeusedforgeneratingreports.• Reportswillalsobesavedautomaticallyontheuser’scomputer.

7SKF TKTI Thermal Camera Software

3. ImageProperties

• Theimagesaresavedinthecameraonamicro-SDcardinthefolderDCIM.• Theimagesarenamed“IR_X.jpg”withXbeingarunningnumberstartingwith

“IR_1.jpg”.• The.jpgimagecontainstheinfraredimage.Inadditionthedigitalimagewhensaved

andthevoicecommentwhenrecordedaresavedinthe.jpgimage.• The.jpgimagescanbevisualizedbyvirtuallyanyimageviewingsoftware.

3.1 LoadingimagesfromtheCamera

a) SwitchOnthecameraandwaituntilitisfullyoperational.b) ConnectthecameratothePCviatheUSBcable. UsetheminiUSBconnectorontherightsideofthecamera.

Figure 3 Use the mini USB connector

c) OpenWindowsExplorer,oranotherfilebrowser,toselectthemicroSDcardinthecamera.

d) Thiswillnormallybeshownasaremovabledisk.

8 SKF TKTI Thermal Camera Software

3.2LoadingimagesfromthememoryCard

Analternativetoloadingtheimagesformthecameraistoloadtheimagesdirectlyfromthemicro-SDcard:

a) Takethemicro-SDcardoutofthecameraandinsertintoasuitablecardreader(provided).

b) ConnectthememorycardreadertothePC.c) OpenWindowsExplorertoselectthefileswiththeimagesonthemicro-SDcard.

Figure 4

Figure 5

9SKF TKTI Thermal Camera Software

4. ImageSelection

4.1 Foldercreation

Theimagesareplacedinfolders.Reportscanbecreatedwiththeimagescontainedinafolder.

a) ClickonthebuttoncircledinredonFigure6toaddafolder.b) TypeafoldernameandclickOKorpresstheEnterkey.

Byrightclickingonafolder,itispossibletoaddasub-folder.Folderscanalsoberenamedordeletedusingtherightclickfunction.

Note: Thefirstfoldercanalsobecreatedautomaticallywhennofolderhasbeenpreviouslycreated.

Figure 6 Add a Folder

10 SKF TKTI Thermal Camera Software

4.2 Imageloading

Imagescanbeloadedbyclickingonthe“LoadImages”buttonhighlightedinredonFigure6.

Selectanyimageonthememorycardorotherstoragelocationtoautomaticallyloadall imagescontainedinafolder.Itisnotpossibletoloadtwoimageswiththesametitle.Tosolvethisissueeithercreateanewfolderorrenametheimage.

Note: Itisalsopossibletoloadonlytheselectedimages,unchecktheoption“Automaticallyloadallfilesfromthesourcefolderonimageloading”inthesettingswindow.

4.3 Imageselection

Figure 7 Selected images highlighted in yellow

• Hoverthemouseoveranyimagetoinstantlyseeintherightpanel,ofthewindow,alargerviewoftheinfraredimageasrecordedbythecamera,thedigitalimage(whenpresent)andtheimageproperties.

• Imagescanbesortedbytitleorbydate.• Imagescanbedisplayedasthumbnailsorasalist.• Selectedimagescanbedeletedbyclickingon“delete”oncetheimagestobedeleted

areselected.

Toselectimagesforfurtheranalysis,clickonceontheimagetohighlighttheminyellow.Clickagainonanimagetodeselectit.Allimageshighlightedinyellowwillbeselectedfor“2 Image Analysis”.

11SKF TKTI Thermal Camera Software

Note:ItispossibletoselectAllorNoneimages.

Note:ThereportsarestoredinFolders.Doubleclickonareporttoopenitin“4 View Report”.

5. ImageAnalysis

Oncetherequiredimageshavebeenselected,clickonceonthetab“2 Image Analysis”.

Figure 8 Image Analysis

5.1 Imageselection

Selectanimageontheleftpartofthescreenforanalysis.Thecurrentimagewillbehighlightedinyellow.Infraredimagesandvisualimagescanbeanalyzedandcommented.

12 SKF TKTI Thermal Camera Software

5.2 Interfacedescription

5.2.1 Span/levelandcolourpalette

Figure 9 Span/Level bar and colour palettes

Ironbow Rainbow 3 Amber

Rainbow 2 Hot Metal Black Hot

High Contrast 2 Orange/Green White Hot

Figure 10 Colour palette examples

TheSpanandLevelcanbemanuallyadjustedtohighlightaparticularzoneoftheimage.• Dragthetopandbottomsliderstochangethelimits.• Dragthefullbaratoncewhentheverticaldoublearrowappears.• Clickonthe“Auto”buttontogobacktotheautomaticSpan/Levelsettings.Theusercanchoosebetween9xcolourpalettes.

13SKF TKTI Thermal Camera Software

5.2.2 MinimumandMaximumTemperature

Figure 11 Min/Max temperature

ClicksuccessivelyontheMIN/MAXbuttontodisplay:Minimum temperature -> Maximum temperature -> Both together -> NoneTheemissivityofbothtemperaturescanbeindividuallyset.

Usethe“SAVE”buttontomanuallysaveanimage.

Note: Thelocalimageissaved;theoriginalimageisnomodified.

14 SKF TKTI Thermal Camera Software

5.2.3 ImageDetailsandProperties

Figure 12 Image Details and Properties

• Title: Showstheoriginalimagetitle.Usereditable.• Date Created:Datewhenimagewassaved.Usereditable.• Location: Tobefilledbytheuser.• Operator:Tobefilledbytheuser.Whenoperatorisfilledinthefirstimage,

itwillbeautomaticallyfilledintheotherimages.• Infrared Camera:ShowswhichSKFThermalCamerahastakentheimage.• Machine Designation:Tobefilledbytheuser.• Global Emissivity:Cameravaluebydefault.Usereditable.

Allnewtemperaturecursorswillusetheglobalemissivityvaluefortemperaturecalculation.Clickon“Apply to all”toapplythesetemissivitytoallcursors.

Note: SeeSKFTKTI21&31instructionsforuse(refMP5417)foralistofthecommonemissivities.

• Reflected temperature:Cameravaluebydefault.Usuallysettotheambienttemperature.Usefultocompensatethetemperaturewhenthereisahotobjectinthebackgroundradiatingonthemeasuredobject.Usereditable.

• Ambient temperature:Cameravaluebydefault.Thecamerameasurestheambienttemperatureandfillsinthisvalueautomatically.Usereditable.

15SKF TKTI Thermal Camera Software

5.2.4 TextFields

Figure 13 Problem Description and Recommendation

• Problem Description:Usethisfieldtodescribeanyproblemshownonthepicture.• Recommendation/Comment:Writeanycommentorrecommendation.

Note: Bothfilledtextswillshowonthereport.Textscanbecopiedandpastedinthissoftware.Werecommendamaximumof11linespertextfield.

• Audio Comment: Whenanaudiocommentwasrecordedonthecamera,itcanbelistenedtousingtheplay,pauseandstopbuttons.

Usethebuttoncircledinredonfigure13tomaximizetheimagesizeonthescreen,thisisparticularlyusefulforlaptopswillsmallerscreens.

Figure 14 Two different possible views for image analysis

16 SKF TKTI Thermal Camera Software

5.3 AnalysisTools

Figure 15 Analysis Tools

Figure 16 Measurement cursors

• Theindividualemissivityofeachspotcanbeadjustedatanytimeinthebottomrightmeasurementsbar.

• Temperaturecursorsandmarkscanbeindividuallyselectedanddeletedfromthemeasurementbarbyclickingonthetoprightcross.

• Amaximum18elementscanbeaddedonaninfraredimage.

Note: Displaytemperaturesontheinfraredimageitselfbyclickingonthebutton“1:10°C”.

Figure 17 Measurements bar

17SKF TKTI Thermal Camera Software

5.3.1 Spottemperatures

Thespottemperaturesshowthetemperatureofagivenpoint.Spotscanbedraggedanywhereontheimage.Spot temperature difference:ChoosetwospotsincludingMinandMaxtoshowthetemperaturedifferencebetweenthesetwo.

5.3.2 Areas:Rectangles,CirclesandLines

Areasareusefultomeasurethetemperatureinazonelargerthanaspot.Foreachrectangle,circleorline,theusercanseetheminimum,maximumandaveragetemperatureinthemeasurementbar.Tomodifyanareadimensions,clickontheareaiconnexttoitsnumberontheimageorselecttheareaintherightbar.Todraganarea,clickontheareaiconnexttoitsnumberontheimageanddragthearea.

5.3.3 Marks,Notes,Arrows

ThesecanbeusedonboththeInfraredandthevisualimages.Markswillspotalocationontheimage;thetextassociatedwillbeintheMeasurementsbar.Notesallowwritingtextdirectlyontheimage.Arrowsallowdrawinganarrowontheimage.

Note: ArrowsandNotescanbedeleteddirectlyontheimagebyclickingontheblackcross.Theydonotcountasanelement.

18 SKF TKTI Thermal Camera Software

6. Reportgeneration

6.1ReportCreation

Figure 18 Generate Report view

• Clickonthetab“3 Generate Report”highlightedinredonFigure18.

• Selecttheimagesintheleftpanelthatshouldbeintegratedintothereport.Infraredimagesandvisualimagescanbeindependentlyselected.SelectingAllorNoneispossible.

Clickon“IR only”toselectallinfraredimagesonly.Imageshighlightedinyellowwillbeincludedinthereport.

• Report Title:Fillinthereporttitletobeshownonthefrontpage.Mandatoryfield.

• Title page image: Thefirstinfraredimageintheleftpanelisusedasafrontpageimagebydefault.Anotherinfraredimagefromtheleftpanelcanbeselectedbyclickingonthe“CHANGE”button.

• Company logo:Insertyourcompanylogointothereport.Thecompanylogowillshowonthetopleftpartofeachreportpage.Whenalogoisalreadyselectedinthesettingspageitwillbeautomaticallyusedforthereport.Select“BROWSE”toselectanotherlogo.Select“REMOVE”toshownocompanylogoonthereport.Thelogofilesizemustbebelow1MB.

19SKF TKTI Thermal Camera Software

• General comment:Insertcommentsforthereportfrontpage.

• Operator:Filledinautomatically,ifthistextfieldwasfilledinthefirstInfraredimage.Willbedisplayedonthefrontpage.

• Report Date:Automaticallyfilledinandusereditable.Willbedisplayedonthefrontpage.

• Clickon“Generate report”togeneratea.pdfreport.

• Clickon“Generate Word document”togenerateaworddocument.Theworddocumentwillbesavedontheuserchosenlocation.Itisfullyeditableandcustomizable.TheworddocumentgeneratordoesnotrequireMicrosoftWordtobeinstalledontheuser’scomputer.Thedocumentformatis.docx.MicrosoftOffice2007orlaterispreferredtoensurebestcompatibilitywiththegeneratedfile.

• Clickon“Export infrared images”tosavetheeditedinfraredimagestoauserchosenlocation.Theimagesareinthe.jpgformat.Theycannotbere-openedbytheSKFThermalCameraSoftware.AllcreatedelementswillbedisplayedontheimagestogetherwiththeSpan/Levelbar.

20 SKF TKTI Thermal Camera Software

6.2ViewandExportReports

Figure 19 Report viewing mode

In“4 View Report”asshownonFigure19,theusercan:• Viewthegeneratedreport.• Changethezoomlevelbyclickingonthetoprightmagnifierglassicon.• Browsethroughthedifferentpagesbyusingthemousewheeltrackpad.

Alternativelythescrollbarontherightofthepagecanbeused.• Pagescanalsobedraggedwiththemousecursor.

Thereportsaresavedasa.pdffile,andcanbeprintedandsendbyemail.• E-mail:Opensanewemailonthedefaultemailclientonthecomputer.

Thereportwillbeaddedasanattachmentinpdfformat.Thereporttitlewillbeusedasafilenameforthe.pdffile.

• Save as pdf:Savethereportin.pdfformattotheuserchosenlocation.• Print:Opentheprintswindowtoprintthereport.

21SKF TKTI Thermal Camera Software

Note: Thelastgeneratedorselectedreportwillbeshownwhenclickingon“4 View Report”.

Reportsareassociatedtofoldersandsavedtogetherwiththeimagesselectedin“1 Image selection”.Previouslycreatedreportscanbeloadedusingtheimageselectiontab.Selectthefolderwheretheimagesandreportaresaved.Doubleclickonareporttoopenitinthereportviewertab.

Figure 20 Report browser

Reportscanbesorted,selectedanddeletedinthesamewayimagesareselected,(SeechapterImageselection).

WARNING:Deleting a folder will delete all images and reports that it contains.

22 SKF TKTI Thermal Camera Software

6.3 Reportlayout

Figure 21 Report layout

Thereportincludesamaximumoftwopagesperinfraredimage.ThepageformatisA4.

Eachpagecontains:• SKFlogoonthetoprightcorner.• Companylogoonthetopleftcorner.• Infraredimagetitle.• Companynameandaddressasapagefooter(notonfirstpage).

Firstpageperimagecontains:• InfraredImagedetailsandproperties.• Infraredimagesnapshotwithcursorsandannotations.• Measurementcursorsdetailsandannotations.

Secondpageperimagecontains:• Visualimagewhenselectedwithannotationontheimage.• Problemdescriptiontextfield.• Recommendation/Commenttextfield.

23SKF TKTI Thermal Camera Software

7. Settings

Figure 22 Settings

• Language:ChoosethepreferedlanguageamongEnglish,French,German,Spanish,Italian,Portuguese,RussianandSimplifiedChinese.Thelanguagewillbechangedinstantlyafterselection.

• Unit of temperature:Choosebetween°C,°FandKelvin.• Date Format:Choosethepreferreddateformat.• Time format:Choosebetween12hor24h.• Auto-Save:Whenenabled,theimagesandreportswillbesavedeverytwominutes.

Auto-savealsosavesimagesandreportswhenanothertabisselectedandwhenthesoftwareisclosed.Itisrecommendedkeepthisfeatureenabled.

• Automatically load all images from the source folder:Whenloadingimagesintothesoftware,selectonlyoneimageandallimagesfromtheoriginalfolderwillbeloaded.

• Use graphics hardware acceleration for better graphics: Disabledbydefault.EnablethisfeatureoncomputerswithWindows7,orlater,toshowenhancedgraphicdetailsanddisplaygraphicalelementsfaster.

• Company Name:Fillinthecompanynameforthereport.• Company Address:Fillinthecompanyaddressforthereport.• Company logo:loadacompanylogotobeusedinthereport.

Thecompatibleformatsare.jpg,.png,.bmp.Thelogowillbeautomaticallyresized;theoriginalproportionswillbekept.Thelogofilesizemustbebelow1MB.

24 SKF TKTI Thermal Camera Software

8. Systemrequirementsandtroubleshooting

Configuration Minimum RecommendedComputermicroprocessor

32-bitPentium®class,1,2GHz

64-bitDualorQuadCore,≥2,5GHz

DRAM 1GB 4GBormoreMonitorresolution 1024™768pixels 1920™1080pixelsOperatingSystem Microsoft®XP® MicrosoftWindows®7-8OperatingSystemComponents

Microsoft.NET®Frameworkversion4.0ornewer

Microsoft.NET®Frameworkversion4.0ornewer

WorddocumentSoftware

MicrosoftWord2000 MicrosoftWord2007

GraphicsinterfacehardwareandRAM

No 128MBRAMdedicatedgraphiccard

8.1 Troubleshooting

• Ifsomeelementsarenotdisplayedcorrectly,restartyourcomputer,thiswillnormallysolvetheissue.

• Ifthesoftwareappearstobeslowonyourcomputer,especiallyonWindowsXP,trydisablingorenablingthe“Graphicshardwareacceleration”setting.

• Downloadthelatestversionofthissoftwarefromwww.skf.com.

• Formoresupport,contactSKFMaintenanceProducts.

25SKF TKTI Thermal Camera Software

26 SKF TKTI Thermal Camera Software

SKF Maintenance Products

www.mapro.skf.comwww.skf.com/mount

MP5418EN

® SKF is a registered trademark of the SKF Group. © SKF Group 2013/09

The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.