sk 258l-o · 2,8 300-350 26-30 35-40 29300 on request with minimal quantityspool 15 kg the...
Post on 18-Jan-2021
2 Views
Preview:
TRANSCRIPT
SK 258L-ODIN 8555 : MF 6-GF-45-GT
Martensitic alloy giving a very good resistance to metal-to-metal and low stress abrasive wear at high temperature. The deposit is crack-free, heat treatable and forgeable.
DESCRIPTION1
Steel mill rollers, blast furnace bells (seat area), dredger-buckets cylinders.
SUITABLE FOR2
TYPICAL CHEMICAL ANALYSIS (WEIGHT %)3
C Mn Si Cr Mo W Fe Ti
0.25 1.4 0.7 5.30 1.3 1.2 Bal. 0.9All Weld
TYPICAL MECHANICAL PROPERTIES4
Hardness as welded
46 HRC
GENERAL CHARACTERISTICS5
Martensite���� Microstructure
Good with Tungsten carbides or cubic Boron Nitride tipped tools
���� Machinability
Flame cut is difficult���� Oxy-acetylene cutting
Depends upon application and procedure used���� Deposit thickness
���� Flux cored
The information about the products contained in the data sheets are based on intensive tests and careful investigations. However we can't assume any form of liability concerning the exactness of it. The information may be changed or updated
without previous notice. The user is invited to test the product with regard to his own application and responsibility.
Revision : 200608021441
@SOUDOKAY SA RUE DE L'YSER 2 B-7180 SENEFFE BELGIUM soudokay soudokay.comsoudokay.be www.| | | | | |
SALES: +32 (0)64 51 02 25
+32 (0)64 51 02 21
|
F
LOGISTICS: +32 (0)64 51 02 10
+32 (0)64 51 02 19
|
F
FINANCE: +32 (0)64 52 00 30
+32 (0)64 52 00 31
|
F
T T T
SK 258L-ODIN 8555 : MF 6-GF-45-GT
WELDING PARAMETERS & ECONOMICAL DATA6
Diameter[mm]
Article code
AvailabilityPackagingCurrent[A]
Voltage[V]
Stick-Out
1,6 180-200 26-30 35-40 NA On request with minimal quantitySpool 15 Kg
2,4 250-300 26-30 35-40 29299 On request with minimal quantitySpool 15 Kg
2,4 250-300 26-30 35-40 41607 On request with minimal quantityAutopack 250 Kg
2,8 300-350 26-30 35-40 29300 On request with minimal quantitySpool 15 Kg
The information about the products contained in the data sheets are based on intensive tests and careful investigations. However we can't assume any form of liability concerning the exactness of it. The information may be changed or updated
without previous notice. The user is invited to test the product with regard to his own application and responsibility.
Revision : 200608021441
@SOUDOKAY SA RUE DE L'YSER 2 B-7180 SENEFFE BELGIUM soudokay soudokay.comsoudokay.be www.| | | | | |
SALES: +32 (0)64 51 02 25
+32 (0)64 51 02 21
|
F
LOGISTICS: +32 (0)64 51 02 10
+32 (0)64 51 02 19
|
F
FINANCE: +32 (0)64 52 00 30
+32 (0)64 52 00 31
|
F
T T T
top related