single point adjustable flow rate …in simalube automatic lubricators the maximum pressure achieved...
Post on 29-Jul-2020
0 Views
Preview:
TRANSCRIPT
Swiss made / worldwide patents
More power, more efficiency
smart lubrication
®
SINGLE POINTAADDJJUUSSTTAABBLLEE FFLLOOWW RRAATTEEAUTOMATIC LUBRICATORS
SINGLE POINTAADDJJUUSSTTAABBLLEE FFLLOOWW RRAATTEEAUTOMATIC LUBRICATORS
13006 EffSimalube ESS 8pp 23/3/07 9:46 AM Page 1
• Eliminate manual lubricationAutomatic lubricators remove the need for manual lubrication bygrease gun or any other cumbersome applicator. They reduce valuablemaintenance team hours. Staff need only inspect the point ratherthan grease it to ensure all is in working order. Time saved can bespent elsewhere on more pressing jobs. It's like suddenly havingmore people on your maintenance team working 24/7 withoutthe extra cost.
• Eliminate contaminationAutomatic lubricators operate providing a constant positivepressure to the bearing/seal, which all but eliminates theingress of dirt. The closed system also means thatcontamination on the outside of the grease nipplecannot be transferred from point to point.
• Ensure greasing points are not missedSometimes even the most experiencedmaintenance person might miss a grease point...it might be a critical one! With automaticlubricators on site, this won't happen. Plus youhave the added peace of mind the correctamount of grease has been applied.
• Wear and tear of equipmentManual greasing once per day / week generally means a large injection of lubricant to a point. It isa proven fact that consistent greasing of a point keeps friction levels down (lower temperature) andincreases component life. This will result in improved running time of your equipment. This thenbecomes your insurance policy against breakdowns and profit robbing maintenance costs.
• Easier and safer for your maintenance crewThe f lexibilit y of remote mounting and quick connection accessories make automatic lubricatorsversatile for application in difficult to reach grease points. Lubricators can be located in safe, easyto reach locations, reducing the risk of strains or potential accidents. No more productivit y lossthrough delays from isolated equipment not being greased.
• Suit just about any applicationAutomatic lubricators operate consistently throughout a wide range of ambient temperatures andin the presence of contaminants, so they are suitable for just about any application where regulargreasing is essential to smooth operation.
Automatic lubricators . . . less breakdowns,less maintenance.
13006 EffSimalube ESS 8pp 23/3/07 9:46 AM Page 2
Why is Simalube the best value?Swiss-made Simalube Automatic lubricators offer many unique features that will benefit your operation. Here are a few of the major advantages:
• Fully adjustable clock. Only Simalube gives you the choice of increasing or decreasingthe grease f low rate by simply rotating the clock dial with an Allen key. You can even turn itoff for short periods during maintenance shutdowns. Other gas driven lubricators have a fixeddispensing speed and duration, offering you no f lexibilit y, so they cost more to operate.
• Improved transparent housing. The current Simalube range comes in a patentedtransparent housing which is superior to others available on the market. It prevents gasdiffusion through the walls of the housing, making Simalube more efficient and reliable thanever. Windows allow easy checking and marking of grease levels.
• More pressure. In Simalube automatic lubricators the maximum pressure achievedthrough our patented gas-producing dry cells is 5 BAR (72.5 PSI). This is more than mostavailable on the market, ensuring that Simalube will get grease to most lubrication points.
• Patented gas producing dry cells. Most competitors offergrease pressure systems driven by dangerous chemicals and
acids. Simalube’s patented gas producing dry cells arecompletely safe, harmless and are approved. With othersystems, acids and chemicals remain in the container after
the grease has been expelled. This is potentially harmful anddangerous to the environment.
• Wider temperature application range. AcrossAustralia high and low seasonally variable temperatures are
common. Simalube offers a predictable output rate. Thetemperature sensitive chemically driven lubricators have a highlyvariable output rate and a maximum ambient operating temperature
of 40°C. Simalube operates effectively in ambient temperatures from55°C down to -20°C with simple compensation available via the fully
adjustable clock.
• Widest range of accessories. The wide range of accessories are designed to suit justabout any and every application. The accessories are designed for reliabilit y, long life, andmaximum lubricant f low efficiency
• Wide range of sizes to suit any application. Simalube is now available in four sizes;30, 60, 125 and 250ml. Whatever your automatic lubrication needs, there is a size to suit. Ifyou require even more grease volume, our 4-fold adaptor will grow your supply to 1,000ml..
• Tried and proven around the world. For many years now, plant operators andmaintenance engineers have been discovering Simalube’s cost and time saving benefits. Theyare economical, reliable, long lasting and safe for an ever-increasing list of applications. Literallymillions have been sold world-wide.
13006 EffSimalube ESS 8pp 23/3/07 9:46 AM Page 3
Cartridge with patented gas production drycells
The inside story . . .
Environmentally friendly / Swiss made / worldwide patents
ø 52 mm (2.05 in.)
ø 52 mm (2.05 in.)
ø 52 mm (2.05 in.)
62 m
m (2
.4 in
.)
100
mm
(3.9
in.)
43 m
m (1
.7 in
.)
186
mm
(7.3
in.)
14
mm
(0
.55
in.)
R1/4”R1/4” R1/4” R1/4”
simalube 30
simalube 60
simalube 125
simalube 250
14
mm
(0
.55
in.)
14
mm
(0
.55
in.)
14
mm
(0
.55
in.)
ø 52 mm (2.05 in.)
The period of operation can be easilyadjusted from 1–12 months
13006 EffSimalube ESS 8pp 23/3/07 9:46 AM Page 4
Temperature/Output rate
www.etsaustralia.com.au
smart lubrication
®
When ambient temperatures are high or low, or when greaserequirements deviate, the amount of grease per day can be adjustedusing the values indicated.
The values refer to standard conditions, SL01 with no counter pressure.Most of all at low temperatures the values can deviate considerably from one grease t ype to the other.
The dispensed grease quantit y / day is inf luenced by: counter pressure/ resistance from grease linesambient temperatureviscosit y of the grease
SettingTemperature days g/day days g/day days g/day days g/day days g/day
-20° 50 2.20 140 0.80 270 0.44 360 0.35 500 0.264° 35 3.17 100 1.14 200 0.53 300 0.35 420 0.2620° 30 3.70 90 1.23 180 0.61 270 0.44 360 0.3540° 28 3.96 86 1.32 172 0.61 262 0.44 352 0.3555° 25 4.40 80 1.40 160 0.70 250 0.44 340 0.35
SettingTemperature days g/day days g/day days g/day days g/day days g/day
-20° 50 4.40 140 1.58 250 0.88 330 0.70 450 0.534° 35 6.25 100 2.20 195 1.14 300 0.70 400 0.5320° 30 7.30 90 2.46 180 1.23 270 0.79 360 0.6140° 27 8.18 86 2.55 175 1.23 265 0.79 355 0.6155° 25 8.80 80 2.73 165 1.32 260 0.88 350 0.61
12
ssimalube 125
ssimalube 250
1 3 6 9
121 3 6 9
CCode Application Thickener Temp RangeSL01 Multipurpose Grease Li/Ca -30/+120SL02 Multipurpose Grease+MoS2 Li -25/+130SL04 High Temperature & Waterproof Grease Ca/Sulf -10/+200SL06 FluidGrease Li -30/+80SL09 BiodegradeableGrease Li/Ca -30/+130SL10 Food Industry Grease Complex -20/+130SL14 ChainOil - -10/+150SL15 High TemperatureChainOil - 0/+250SL18 Food Industry ChainOil - -40/+80
Available in sizes 30ml, 60ml, 125ml and 250ml.
Standard Lubricants (Custom Fill available on request)
13006 EffSimalube ESS 8pp 23/3/07 9:46 AM Page 5
X
Fixed mounting support Fixed mounting support with protective cover for simalube®
Y-manifoldfor 250 ml lubricant need
WRONG 4-fold adaptorfor 500 ml lubricant need
Chain lubrication with bracket,universally adjustable
Chain lubrication with roundbrush and clamp
Lubrication of elevator guidesor wire ropes
Chain lubrication with bracket,universally adjustable
Chain lubrication with roundbrush and two clamps
Round brush with 90ºconnection
Chain lubrication with lateral connection
SP2082SP2083SP2084
SP2082SP2083SP2084
SP2082SP2083SP2084SP2080
SP1060
SP2000
SP2080
SP2000
SP2081
SP2080
SP2000
SP1050
SP4100SP4101Problematic due to different
counter pressure!
SP2035SP2036SP2037SP2038
SP2010
SP2034
SP2010
SP2039
SP2800SP2035SP2036SP2037SP2038
SP1045SP1046
SP2014
SP2034
SP2010
SP2013
SP2010
SP2041SP1005
SP2035SSP2036SSP2037S
SP1045SP1046
SP1060
Dust Cap
SP2075
A C C E S S O R I E S T O S U I T Y O U R N E E D S
13006 EffSimalube ESS 8pp 23/3/07 9:46 AM Page 6
D
L
17
D28 1/4“
D
1/4“
D1/4“
L
1/4“
16
1/4“
L
ø 58
103
Dø 8
1/4“
L
1/4“
D
1/4“
1/4“
D
1/4“
1/4“
20
1/4“
L
20
L
L
L
22
55
ø 6.5
20
D
1/4“
L1/
4“23
31.5
17.5
D
151
31.5
5–16
102
ø 70
18
D
36
L
30
D28 1/4“
ø 100
1625
D
L
31.5
23
1/4“
D
30
20H
D
1/4“
Dø 8
84
35
50
60
Bent connection 451/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1001Brass, nickel plated
Bent connection 901/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1002Brass, nickel plated
90o connection with thread70mm, incl. 2 nuts. . . . . . . . . . . . . . . . . . . . .SP1005Brass, nickel plated
Connection, Straight 1/4” x3/8” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP10101/2” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1011
Brass, nickel plated
Connection nipple 1/4” x1/8” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP10201/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1021M6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1022M8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1023M8x1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1024M10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1025M10x1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1026M12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1027M12x1,5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP10281/4” (UNF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1121Brass, nickel plated
Extension35mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP104050mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1041
Brass, nickel plated
Screwed connection with hole25mm incl 1 nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP104560mm incl 2 nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1046
Brass, nickel plated
Y-manifold(incl reducing nipple 1021)1/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1050
Brass, nickel plated
Quick connectionfor hose ç 8mm1/4” female . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1060
Brass, nickel plated
Quick connection for hose ç 8mm1/8” male . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP10701/4” male . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP10713/8” male . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP1072
Brass, nickel plated
Hoseç 8mm permetre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP2000
Plastic
Clampfor Simalube® lubricator50mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP2010
Plastic
Adaptorfor Perma clamp50mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SP2012
Plastic
Clampfor round brush (part 2034)28mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP2013
Plastic
Distance holderto clamp for round brush 15mm. . . . . . . . . SP2014
Plastic
Non-return valve1/8” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP20201/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP2021
Brass, nickel plated
Round brushhorse bristlesç25x15mm. . . . . . . . . . . . . . . . . . . . . . . . . . SP2034
Plastic
Brush40mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP203570mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP2036100mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP203725mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP2038
Aluminium
Brush, lateral connectionhorse bristles 40mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP2035S70mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP2036S100mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . SP2037S
Aluminium
Elevator brushhorse bristles . . . . . . . . . . . . . . . . . . . . . . . . SP2039
Plastic
Round brushPlastic bristles ç 25x45mm . . . . . . . . . . . . . SP2041
Plastic
Mounting support consisting of: • flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP2080• connecting nipple 1/4”• nut
Plastic/brass. nickel plated
Protective coverto mounting support 2080 . . . . . . . . . . . . . SP2081
Steel, varnished
Bracket to mounting support75mm (1 bore) . . . . . . . . . . . . . . . . . . . . . . SP2082240mm (3 bore . . . . . . . . . . . . . . . . . . . . . . SP2083390mm (5 bore) . . . . . . . . . . . . . . . . . . . . . SP2084
Steel, burnished
Bracketuniversally adjustable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP2800
Steel, burnished
4-fold adaptor1/2” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP41001/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SP4101
Plastic/brass, nickel plated
13006 EffSimalube ESS 8pp 23/3/07 9:46 AM Page 7
Summing up the case for Simalube:
Why choose Automatic Lubricators over manual greasing?
1. Eliminate manual relubrication2. Ensure not one single greasing point gets missed3. Maintains bearing/seal at constant positive pressure4. Easier and safer for your maintenance crew5. Suit just about any application
Why choose Simalube over the others?
1. Fully adjustable clock2. One model �ts all3. Patented gasproducing drycells4. Wider temperature application range5. Widest range of accessories6. Compact size, safe and environmentally friendly7. Windows for checking level of grease8. Top qualit y service and back up from long standing
Australian distributor
What’s the next step?
It's really quite simple... just contact your localSimalube distributor and ask for a quote on:
Purchase of Simalube lubricators for your site, orQuote for an on-site survey to see which Simalubes might need accessories and remote mounting, orComplete turn key solution where we install Simalubes at your site after a survey, orOngoing Simalube replacement service after initial installation.
Australian Distributor
www.etsaustralia.com.au
Your local Simalube Distributor:
ETSHead O�ce4 Cache BendWangara WA 6065
Ph: 08 6305 0926Fax: 08 6305 0946Mobile: 0419 917 803
Eff
ectiv
e 2k
130
06
NPMMS=bÑÑpáã~äìÄÉ=bpp=Uéé==OPLPLMT==VWQS=^j==m~ÖÉ=U
top related