sedimentary rocks and the origin of sedimentary strata

Sedimentary Rocks and the Origin of Sedimentary Strata

Basins to Bedding

1

Sedimentary Rocks• Sedimentary rocks are those rocks which form at or near the

earth's surface primarily through:• Deposition of weathered silicate material by water, wind, or ice (detrital,

clastic, terrigenous)• Direct inorganic chemical precipitation from water • Precipitation by organic processes

2

Sedimentary Rocks•Three end-member types:

3

• T=Terrigenous• Residual and secondary

weathering products (siliciclastic)

• Allogenic (extra-basinal) origin

• A= Allochemical• Chemical or biochemical

particles, shell fragments• Authigenic (form within basin)

but locally reworked

• O= Orthochemical• Primary chemical precipitation

from dissolved ions• Authigenic (form within basin

of deposition), no reworking

IO= Impure orthochemicalIA= Impure allochemical

Sedimentary Rocks• T: Terrigenous• Most mudrocks, sandstones,

and conglomerates• 65% to 75% of sedimentary

strata• IA: Impure Allochemical• Very fossiliferous shale,

sandy fossiliferous or oolitic limestones

• 10-15% of sedimentary strata

• IO: Impure Orthochemical• Clay-rich microcrystalline

limestones• 2-5% of sedimentary strata

• A: Allochemical rocks• Fossiliferous, oolitic, pellet, or

intraclastic limestone or dolomite• 10-15% of sedimentary strata

• O: Orthochemical Rocks• Microcrystalline limestone, chert,

anhydrite, crystalline dolomite• 2-8% of sedimentary strata

4

Sedimentary Rocks: Terrigenous• Terrigenous (clastic, detrital)

sediments and rocks

• Also called siliciclastic since most particles are silicate mineral grains

• Grains created by weathering

• Transported by surface processes • Water, wind, ice

5

• Deposited as horizontal, stratified layers in sedimentary basins

• Buried and lithified by• Compaction• Cementation

Sedimentary Rocks: Allochemical

• Allochemical (mainly carbonate) sediments and rocks

• Dominantly biologic origin (shells or bones)

• Carbonate systems develop where siliciclastic sourcelands are low and/or very distant

• The water is shallow marine

• Climates are tropical to subtropical

6

Sedimentary Rocks: Orthochemical• Orthochemical (chemical

precipitate) sediments and rocks

• Dominated by limestones and dolostones of precipitate origin

• Also includes evaporites, chert, and iron formations

• Precipitate from marine or non-marine waters due to chemical changes

7

Sedimentary Depositional Environments• In geology depositional environments are defined by

processes and products

• Physical processes determine:• Grain size, sorting, rounding• Bedding style (including sedimentary structures) and geometry

• Biological processes determine:• Fossil content• Biological disruption of original stratification

• Chemical processes determine:• Types of minerals formed at the site of deposition and during burial

•Study of modern depositional environments used to infer how ancient rocks formed (“present is key to past”)

8

Sedimentary Depositional Environments: Main Types

• Continental (above sea level)• Fluvial (stream); stream channel and floodplain• Glacial; direct deposits and outwash• Lacustrine (lake)

• Transitional (Continental and Marine)• Delta• Estuary and lagoon• Beach

• Marine (below sea level)• Shallow sea (shelf) and reefs• Submarine canyons (submarine “deltas”)• Pelagic environments; abyssal plains

9

Sedimentary Basins•Sedimentary rocks form in basins• Areas of the earth’s surface subject to long term (millions to

tens of millions of years) subsidence resulting in space to accommodate sediment (not subject to erosion)

10

Sedimentary Basins• Basins occur in a wide

range of tectonic settings

Cratonic settings: Michigan basin

Convergent plate setting and active plate boundaries: Puget trough

Divergent plate boundaries: Passive; Atlantic coast

basin Rift Basins; East African

Rift

11

Terrigenous Clastic Basin

Carbonate Basin

• Simple model and classification

12

Sedimentary Basins and

Rocks

Siliciclastic Rocks: Components• F-M-C-P• Framework Grains • >0.05 mm allogenic mineral grains, rock fragments• Residual from weathering

• Detrital Matrix • <0.05 mm (clay, quartz, feldspar, carbonates, organics, oxides)• Chemical weathering products

• Cement • Authigenic, post-depositional orthochemical component• Precipitated from circulating pore fluids (silica, carbonate, Fe-oxide,

clay, feldspar, other oxides, zeolite, salts)• Pores • Primary (~40%) or secondary due to leaching/dissolution

•Classification based on (1) texture, (2) composition

13

Siliciclastic Rocks: Texture

• Descriptive Textural Classification

• Grain Size

• Uden-Wentworth grain size scale• Phi = -log2 (grain diameter in

mm)• naturally occurring groups• Gravel ~ rock fragments • Sand ~ individual mineral

grains (particulate residues)• Mud ~ particulate residues

+/- chemical weathering products• Clay ~ chemical weathering

products (clay minerals, etc.)

14

Siliciclastic Rocks: Texture•Grain size and sorting• Statistical/graphic presentation of texture • Quantitative assessment of the % of different

grain sizes in a clastic rock

• Mean: average particle size• Mode: most abundant class size

15

Siliciclastic Rocks: Texture• Grain size,

sorting, and roundness – interpretation:• Textural

Maturity• Kinetic energy

during transport and reworking

• Transport history• Dispersal

patterns• Beware:• Mixed sources• Biogenic

reworking

16

Siliciclastic Rock Classification• Descriptive textural classification based on

proportions of:• S (sand; 0.063-2mm) - S (silt; 0.004-0.063 mm) -

C (clay; <0.004 mm) • Sandstones, siltstones, and shales

• G (gravel; >2 mm) - S (sand) - M (matrix; <0.063 mm) • Conglomerates and breccias• >30% gravel; indicates high transport energy

• Further classification based on composition

17

Siliciclastic Rocks: Sandstone

• Basic classification based on proportions of • Mineral grains (dominantly

quartz)• Matrix (clay to silt-sized clastic

material filling spaces between grains

• Arenite = <5-15% matrix• “Clean” sandstone• Depositional agents that sort

sediment well

• Wacke = >15% matrix• “Dirty” sandstone

18

Siliciclastic Rocks: Sandstone•Many classification schemes, but most based on

relative proportions of framework grains • Relative abundance a function of mineral grain’s

Availability, Chemical Stability, Mechanical Durability

•Anything Possible, most common:• Quartz : • monocrystalline, polycrystalline; ig, met, or sed source • mechanically & chemically stable, abundant

• Feldspar: • K-spar (sandine, microcline), Plag (Na-Ca)• Abundant and somewhat stable (often altered)

• Rock (Lithic) Fragments:• All kinds (including limestone/dolomite RF’s)• Abundant, less stable (depending on dep conditions)

•Also accessory (minor abundance) “heavy” minerals

19

Siliciclastic Rocks: Sandstone• Classification based on

normalized (relative proportions) of• Q = q/q+f+r• F = f/q+f+r• R (or L) = r/q+f+r

• 7 types of “normal” sandstones

• Others = “mineral” arenite, i.e. mica-arenite, magnetite-arenite

20

Siliciclastic Rocks: Sandstone• Sandstone composition is tied to source area and tectonic

setting

• Ternary System for Sandstone classification

21

Siliciclastic Rocks: Mudrocks22

• Most abundant of all sedimentary rocks• Composed of silt & clay-sized particles• Dominated by clay minerals (kaolinite, smectite, illite)• Also quartz, feldspar, carbonate, organic matter, others• Composition modified by diagenetic processes

• Variable color• Gray-black = presence of organic matter• Red-brown-yellow-green = oxidation state of Fe

Siliciclastic Rocks: Mudrocks

23

Siliciclastic Rocks: Conglomerates

24

• Coarse-grained siliciclastic rock with muddy or sandy matrix

• Gravel >30% of grains• Provenance easily determined by

composition of clasts• Main types:• Conglomerate: rounded clasts in sandy

matrix• Breccia: angular clasts in sandy matrix• Diamictite: clasts in muddy matrix

Terrigenous ClasticDepositional Environments• Long systems• Complex association of

depositional environments through which clastic sediment is transported and in which some sediment is deposited

• End product is relatively “mature” sediment

Sediments are chemically and mechanically stable in composition (high temp, unstable minerals are not present)

Sediments are well sorted into the end member sizes of sand and clay.

Sandstones at the end of the long system are mature quartz arenites

25

Terrigenous ClasticDepositional Environments• Short systems• The siliciclastic

source land is proximal to (close to) the basin

• Commonly observed in tectonically active regions

• Sediments across the entire system are mineralogically and texturally immature

• They are generally poorly sorted and range in size from gravel to coarse sand

26

Carbonates• Make up 10-15% of

sedimentary rocks• Excellent indicators of

depositional environments; integral to study of past environments and earth history

• Important reservoirs for oil and gas

• Carbonates (>50% primary carbonate minerals)▫ Limestone (CaCO3)

Chemical biochemical

▫ Dolomite (CaMg(CO3)2) Chemical

27

Carbonate Sediment: Origin• Most primary carbonate sediments form as biogenic particles

in shallow marine environments (secreted as shells of invertebrates and algae)• Warm water (tropical; 30oN to 30oS latitude)• Shallow shelf; within the photic zone (mostly <10-20 m)• Also accumulate in deep water (pelagic oozes)

• Inorganic precipitates from sea water also occur• Can form in continental settings (lacustrine, desert, soil,

springs)

28

Carbonate Rock Constituents• Carbonate rocks mainly composed of:

• Micrite• Lime mud (<0.004 mm)• Largely fragmental algae remains, also chemical precipitate

• Sparite• Crystalline carbonate material (>0.004 mm)• Forms by precipitation (often as cement) or recrystallization

• Allochems• Transported chemical or biochemical precipitates (fragmental

material)• Include intraclasts, ooliths, peloids, and bioclasts

• Biolithic elements• Formed by organisms in situ• Bound together by precipitated material

29

Carbonate Rock Constituents• Micrite: • Microcrystalline calcite

particles of clay (<1-4 micron) size (subtranslucent matrix) formed by:• Chemical or biochemical ppt• Abrasion of allochems

• Implies deposition in a low energy environment just like in terrigenous mudstone

30

Carbonate Rock Constituents•Sparite (cement): • Clear granular (“sugary”) carbonate crystalline

orthochemical material• Formed in interstitial pore spaces of carbonate sediment• Cement in pores indicates original void space

• Also commonly forms during diagenesis• Recrystallized allochems

or micrite

31

Carbonate Rock Constituents

• Allochems: Intraclasts• Reworked, early lithified carbonate fragments

• irregularly-shaped grains that form by syndepositional erosion of partially lithified sediment

32

Carbonate Rock Constituents• Allochems: Ooliths• Concentrically laminated

carbonate structures• Oolites - <2 mm in

diameter• Thought to be abiogenic in

origin• Layers precipitated onto a

grain during wave agitation

• Pisolites - same as oolites, but >2 mm

• Oncolites - spheroidal stromatolites (> 1-2 cm)

33

Carbonate Rock Constituents• Allochems: Pelloids • silt to fine grained, sand-sized carbonate particles with no distinctive

internal structure• most thought to be fecal pellets

34

Carbonate Rock Constituents• Allochems: Skeletal particles (bioclasts)• whole microfossils, whole megafossils, broken shell fragments • Marine invertebrates: algae, forams, corals, bryozoans, brachiopods,

gastropods, mollusks, ostracods, etc.• Standard microfacies (fossil fragment type -> environment)

35

Carbonate Rock Classification• Based on depositional

texture (mainly proportion of allochems)• Two main classification

schemes:• Folk• % and type of allochem• Micrite vs sparite matrix

• Dunham• Abundance of allochems (ratio

grains:mud)• Original components bound

together

• Both overlook some types of carbonates

36

Carbonate Rock Classification: Dunham

•Dunham Classification• Texture and

allochem type incorporated into classification• Sediment

deposited in calm vs agitated waters

37

• Mud-bearing vs mud-free sediment• Grain vs mud support• Original components bound (biologically)

• Depositional texture recognizable

Carbonate Rock Classification: Dunham

• Presence or absence of lime mud; is there any mud at all. Calm waters allow for the accumulation of lime mud and indicates the absence of current induced agitation

• Grain Support: self supporting framework• fluid circulation, diagenesis

• Grain kind: standard microfacies types• Grain size, rounding, and coating: hydrologic interpretations• Biogenically ppt masses bound at time of deposition:

• Boundstone• organic framework• laminations not consistent with gravity (stromatolite)• roof over sediment filled cavities

38

Carbonate Depositional Systems• In the warm, clear, shallow

water organisms create sediment:

• Calcareous algae flourish and generate micrite

• Invertebrate animal skeletons accumulate as sedimentary particles (bioclasts)

39

• Also, particles created indirectly by biological or chemical activity• Oolitic, pelletal, and intraclastic allochems are also produced locally,

depending on conditions

Carbonate Depositional Environments• Generic rimmed carbonate shelf platform – basin margin

40

Collaborative Activity

1. You have two sandstones (Table, handout)A. Plot the normalized proportions of Q, F, and L on the ternary diagram.B. For each sandstone:

1. Classify it (give it a compositional name and indicate arenite vs wacke)

2. Determine the most likely tectonic setting from which it originated, and give your evidence

3. Determine the depositional environment (general - long system, short system; be more specific if you can) in which it most likely formed, and give your evidence

2. You have three carbonates (handout)A. Based on the description, for each carbonate:

1. Give it a compositional classification under both the Folk and Dunham schemes (and indicate allochemical vs orthochemical)

2. Describe the depositional environment as best you can and give your evidence

41