sectional views - gurkokaylin.gurkok.net/sectional view.pdf · 2. the part of the object behind the...

Post on 09-Apr-2020

23 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

SECTIONAL VIEWS

Dr. Aylin YENİLMEZ-GÜRKÖK

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

1.The position of the cutting plane is indicated by the center line A-A,

2. The part of the object behind the arrows is removed in the sectional view. The

sectional view can either be an elevation or plan.

3. Cut surfaces produced by cutting planes are called sections and they are hatched

with thin continuous lines, equally spaced and usually at 45º as shown.

SECTIONAL VIEWS Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Types of Sectional Views

Half Sections

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Types of Sectional Views

Local or Broken-out Sections

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Types of Sectional Views

Part or Scrub Sections

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Types of Sectional Views

Revolved Sections

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Types of Sectional Views Removed Sections

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Types of Sectional Views Off-set Section

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Types of Sectional Views

Aligned Section

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Omission of Hatch Lines

Webs or Ribs and Spokes and Ribs

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Details not Sectioned on Assemblies

Spokes aligned and not sectioned

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Details not

Sectioned on

Assemblies

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

Dr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami

top related