schede latitude a4tread builder builder developed for the cold retreading industry and designed to...

TREAD BUILDERBuilder developed for the cold retreading industry and designed to apply pre-cured tread strips on truck, bus and light transport vehicle tyre casings. It is equipped with a support for application of calendered cushion gum and an automatic rotating knife to cut the pre-cured tread strips.The machine can be tread roll lifting system provided.

KEY FEATURES• For tyres from 15” to 24”, including 445/65R22,5”

• Expandable chuck unit driven centrally with gearbox motor

• Automatic stitching cycle (Radial stitching)

• Limit switch for automatic tread length control

• Foot pedal that controls tyre rotation in both directions for manual cushion gum application

• Rotating knife integrated in the machine

• Crank for poly removal

• Full tread rolls lifting system

• Automation components Rockwell

3552

1548

3552

1548

LAYOUT

(image just for illustrative purposes the machine may have different configurations)

Shamrock marketing, inc11206 Bluegrass parkway - louisville, ky 40299 - info@shamrockmarketinginc.Com - www.Shamrockmarketinginc.Com

TECHNICAL DATAPower Supply Voltage 400/460 V - 50/60 Hz

Total installed power 5kW

Tyre diametermin. 600 mm - 23,6’’max. 1260 mm - 49,6’’

Tread widthmin. 160 mm - 6,3’’max. 460 mm - 18,1’’

Bead diameter min. 15’’ – max. 24’’

Air supply pressure 8 bar (120 psi)

Width 71 inches

Height (from the floor) 83 inches

Length 138 inches

Weight 4.000 pounds

OPTIONAL:• Tread roll lifting system

TREAD BUILDER