scanner assembly - including the adf, and accociated...
Post on 11-Aug-2020
4 Views
Preview:
TRANSCRIPT
1 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Scanner Assembly - Including the ADF, and Accociated Covers
1
10
9 4
10
5 6
10
9
2
8 11
3 7
10
12
10
10
Part Number Description
C9143-60109
Q2660-60143
C9124-40002
C9124-40003
C9124-40005 C7296-00014 C9143-60102 C9124-0002
Q2657-60001
0515-4672
0515-4671
0515-4257
Q2660-60103
10
Ref
1
2
3
4
5
6
7
8
9
10
11
12
Automatic document feeder (ADF) and flatbed scanner lid - Includes the lid, the ADF feed mechanism, and
scanner input tray - Mounts on top of the flatbed scanner
Flatbed scanner assembly
Left scanner cover - Mounts on the left end of the scanner assembly - Covers the scanner formatter PC board
Right scanner cover - Mounts on the right side of the scanner assembly
Retainer frame (U-shaped) - Retains the small piece of glass that is used with the ADF assembly - Mounts
on the left end of the scanner assembly
ADF glass window (ONLY) - Small glass window that mounts on the left end of the scanner assembly - Used
when scanning documents from the ADF assembly
Paper input tray for the ADF assembly - Mounts on top of the ADF assembly - Includes the width adjust-
ment side rails
RFI sheild for the scanner controller PC board assembly
Scanner control board assembly - Includes the PC board and interconnecting flat flexible cable
Pan head plastite screw with washer - M4.0 x 1.75, 13.1mm long, Number 2 Phillips recess - Steel, nickel
plated fnish - For securing the scanner to the printer (four used)
Pan head plastite screw with washer - M3.0 x 1.27, 9.1mm long, Number 2 Phillips recess - Steel, nickel
plated fnish
Pan head taptite screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips - The single black
screw (of the three screws) that secure the scanner formatter PC board assembly to the scanner case
Flat flexible cable (FFC) and RFI shield assembly - Includes the flat flexible cable and its wrap-
around RFI shield - Interconnects the flatbed scanner assembly to the printer formatter board
2 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Scanner Assembly - ADF Rollers and Separation Pad
2
5 4
4
3
1
Ref
1
Part Number Description
C7309-60091
2 C7309-40153
3
4
5
C7309-60009
0624-1055
C7309-40013
C7309-80013
ADF PICK ROLLER ASSEMBLY - INCLUDES TWO ROLLERS IN A BRACKET ASSEMBLY - Moves the frst few
top pages of the input stack into the ADF assembly where the top page is picked off and feed to the pre-
scan drive rollers
Cleanout assembly strip - Green plastic bar with two grab tabs - Can be removed to help clear paper
jams in the automatic document feeder assembly - Snap locks on the back side (far left side) of the ADF
assembly and runs the full width of the paper path
ADF SEPARATION PAD ASSEMBLY - Works with the pick roller assembly to separate the paper stack into
individual sheets - Mounts below the pick roller in the ADF assembly
Pan head plastite screw - 2-28 thread, 0.312 inches long, T8 torx - Used to secure the separation pad
assembly in the ADF assembly (two used)
Paper sensor flag - Senses when there is a document in the automatic document feeder input tray -
Mounts in the top of the ADF cover
Torsion spring - For the ADF paper sensor flag - Provides a slight amount of back pressure so the flag will
not mistakenly indicate a document
Scanner Assembly - Control Panel Assembly
5
3 1
4
2 6
6
6
3 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Ref
1
2
3
4
5
6
Part Number Description
C9124-40006
Q2660-60104
Q2660-60101
C9124-60113
Q2660-67905
0515-4671
Support Chassis - Curved plastic piece that supports the control panel keypad - Mounts to the front of the
printer
Flat flexible cable (FFC) - Interconnects the control panel assembly to the scanner control board
Control panel keypad assembly - Has ‚Copy', ‚Print', ‚Scan' and ‚Fax' function keys - Does
NOT include the bezel - Mounts in the support chassis on the front of the scanner assembly
Speaker assembly - Includes the speaker and cable - Mounts in the lower part of the control panel support
chassis
Control panel bezel - Oval shaped plastic piece with cutouts for the control function keys and display (German)
Pan head plastite screw with washer - M3.0 x 1.27, 9.1mm long, Number 2 Phillips recess - Steel, nickel
plated fnish
External Covers
1
3
4
11
5
6
10
7
9
8
2 2
2
Ref
1
2
3
4
5
6
Part Number
XA9-1583-000CN
XA9-1503-000CN
RC1-2391-000CN
RC1-2392-000CN
RF0-1100-030CN RG0-1116-000CN
Description
M4 truss head (flanged) phillips/hex combo drive screw - 12mm long - (S1) Used to secure the top
cover to the print engine frame
M3 truss head (Flanged) phillips screw (Black oxide fnish) - 6mm long - (S6) Typically used to secure
plastic parts and the support pan to the metal side plates
Left height guide - Plastic channeled strip with locking tab - Mounts in the paper exit slot on the top cover
Right height guide - Plastic channeled strip with locking tab - Mounts in the paper exit slot on the top cover
Top cover assembly - Has face-down paper output tray molded into it - Mounts to top of printer - Pro-
vides mounting support for the scanner assembly
Right side cover assembly - Has molded-in air intake louvers
4 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Ref
7
8
9
10
11
Part Number
RG0-1115-040CN
RA0-1450-020CN
RA0-1470-000CN
RG0-1113-000CN
RG0-1114-000CN
Description
Toner cartridge door - Fold down door used when accessing the toner cartridge - Mounts to the top
of the front cover
Front cover - Lower front of printer - With opening for inserting the paper input tray assembly
Support frame - Curved plastic support piece - Mounts on the bottom left side of the printer (below
the left side door)
Left side door assembly - Provides access to connect the printer interface cables - Includes door and
hinge
Rear cover assembly - Includes rear cover and fold down face-up (or straight through) paper output
tray (tray is NOT sold separately)
Paper Input Tray Assembly
2
1
1
3
Ref
1
2
3
Part Number
XB4-7300-809CN
RG0-1122-000CN
RG0-1121-000CN
Description
M3 self-tapping pan head phillips screw (Black oxide fnish) - 8mm long - (S11) Used to secure the
width adjusters to the arms on the top cover for the paper input tray
Paper tray cover assembly - Includes clear plastic cover with blue width adjustment guides for ‚prio-
rity' paper input
Printer input paper tray assembly - Includes bottom tray, blue paper length adjustment lever, and
extension arm (does NOT include the paper tray cover)
5 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Internal Components (1 of 2) 3
4
7
5 6
8
10
1 11
13
12
17 2
19
16 9
18 14
19 20
23 21
24 22
19
15
2
Ref
1
2
3
4
5
6
7
8
9
10
11
12
Part Number
XA9-1495-000CN
XA9-1503-000CN
RA0-1182-000CN
RA0-1169-000CN
RK2-0185-000CN
RM1-0832-000CN
RA0-1452-000CN
RM1-0551-000CN
RC1-2195-000CN
RM1-0550-000CN
RL1-0303-000CN
RM1-0835-020CN
13 RM1-0838-000CN
Description
Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
M3 truss head (Flanged) phillips screw (Black oxide fnish) - 6mm long - (S6) Typically used to secure
plastic parts and the support pan to the metal side plates
Shutter lever - Spring loaded lever - Mounts to the top of the laser/scanner assembly
Compression spring - Provides tension for the shutter lever - Mounts between the shutter lever and
the laser/scanner assembly
Flat flexible cable (FFC) - Interconnects the laser/scanner assembly to the printer formatter board
Cable assembly (four-wire) - Interconnects the laser/scanner assembly motor to the printer formatter
board
Front cover support (L-shaped) - Mounts on the upper right corner of the right side plate
Gear/clutch assembly kit - Includes double-gear body, shaft attachment piece and spring - For driving
the paper feed roller
Guide - For the shutter lever on the laser/scanner assembly - Mounts on the metal support bracket
for the laser/scanner assembly
Transfer roller assembly - Transfers static charge to the media being printed on - Mounts in the top of
the paper feed guide assembly
Paper pickup roller (D-shaped roller) - Picks up media from the paper input tray - Clips in the holder
on the paper pickup shaft
Right side plate assembly - Includes the right side plate, drive motor, most all drive gears, and cam
levers - Does not come with the pickup roller solenoid or 69 tooth gear - Right side of the internal
printer mechanism
Paper pickup assembly - Includes the pickup roller, paper feed roller assembly, separation pad, plastic
housing and other associated parts - Mounts in the bottom rear of the printer
6 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Ref
14
Part Number
RM1-0833-030CN
RM1-0834-030CN
RM1-0836-020CN
RA0-1444-000CN
Q2658-67901
15
16
17
18
19
20
0515-2908
Q2660-00002
C9138-60001
21
22
23
C9138-60002
C9126-60103
C9126-40003
C9126-00001
Description
Print engine control board - Provides motor drive, paper motion monitoring, printing control and po-
wer supply
Print engine control board - Provides motor drive, paper motion monitoring, printing control and po-
wer supply
Left plate assembly - Left side of internal printer mechanism - The printer formatter board mounts to
this plate
Front cover support (L-shaped) - Mounts on the upper left corner of the left side plate
Printer formatter board - Controls the logic and timing operation of the printer, translates the control
panel input, and provides control of the scanner assembly - Does NOT include the LIU board - Mounts
on the left side of the printer
Pan head machine screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips - Used to mount the
formatter PC board and shield to the left side plate (fve used)
Upper RFI shield - Mounts over the printer formatter board on the left side plate asssembly
Line interface unit (LIU) board - provides telephone communications (for fax capabilities) to the prin-
ter - For the United States and World Wide EXCEPT Europe - Mounts on the printer formatter board
shield on the left side of the printer
Line interface unit (LIU) board - provides telephone communications (for fax capabilities) to the prin-
ter - For Europe ONLY - Mounts on the printer formatter board shield on the left side of the printer
Ribbon flex cable - From line interface unit PC board to printer formatter PC board
PC board cover - Rectangular shaped plastic pan - Covers the line interface unit (LIU) board - Mounts
to the RFI shield for the printer formatter board
Ground strap - Small metal plate with two screw holes - Mounts to the back of the line interface unit
(LIU) board
Internal Components (2 of 2) 1
3 1
12
4
13
1
2 5
7 6
1
8
9
11
7 10
7 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Ref
1
2
3
4
5
6
7
8
9
Part Number
XA9-1495-000CN
XA9-1503-000CN
RA0-1447-020CN
RA0-1088-000CN
RA0-1176-000CN
Description
Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
M3 truss head (Flanged) phillips screw (Black oxide fnish) - 6mm long - (S6) Typically used to secure
plastic parts and the support pan to the metal side plates
Right side fuser bracket (L-shaped)
29 tooth gear - Mounts on the end of the pressure roller - Largest of the three gears on the fusing
assembly
69 tooth gear - Large gear with ribs and six small holes - Mounts on on a rod in the upper rear corner
of the right side plate
RM1-0846-000CN Fan Assembly - Includes the tubeaxial fan and the plastic mounting bracket/airflow guide - Mounts to
the right side plate assembly
RA0-1457-000CN
RK2-0064-000CN
Connecting link - Connects between the sliding linkage on the left and right side plates and the toner
cartridge access door (two used)
24VDC Solenoid - Engages the pickup roller gear/clutch assembly - Mounts on the right side plate
assembly
RM1-0835-020CN Right side plate assembly - Includes the right side plate, drive motor, most all drive gears, and cam
levers - Does not come with the pickup roller solenoid or 69 tooth gear - Right side of the internal
printer mechanism
RA0-1451-000CN Front guide assembly - Ribbed plastic piece that runs the width of the printer - Mounts to the front of
the left and right side plates
10
11
12
13
RM1-0836-020CN Left plate assembly - Left side of internal printer mechanism - The printer formatter board mounts to
this plate
RM1-2076-030CN Fusing assembly - Bonds toner to paper with heat - For 220V to 240VAC operation -
RA0-1446-020CN Left side fuser bracket (L-shaped)
Right Side Plate Assembly
3
2
4
1
9
5
6
8
7
1
8 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Ref
1
2
3
Part Number
XA9-1495-000CN
XA9-1503-000CN
Description
Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
M3 truss head (Flanged) phillips screw (Black oxide fnish) - 6mm long - (S6) Typically used to secure
plastic parts and the support pan to the metal side plates
4
RM1-0835-020CN Right side plate assembly - Includes the right side plate, drive motor, most all drive gears, and cam
levers - Does not come with the pickup roller solenoid or 69 tooth gear - Right side of the internal
printer mechanism
WT2-5694-000CN Snap-in cable clamp - Secures the cable from the fan assembly to the right side plate, the motor cable
from the laser/scanner assembly to the left side plate, and the drive motor cable to the metal support
pan (three used)
RA0-1212-000CN
RA0-1172-000CN
RK2-0063-000CN
5851-1172
5851-1172
Tension spring - Provides tension for the linkage which engages the toner cartridge drive gear -
Mounts on the right side plate
17 tooth gear assembly - Includes the 17 tooth gear mounted on a black plastic lever/bracket -
Mounts to the right side plate
DC stepper motor assembly - Drives all rollers and fusing assembly via the gear train on the right
side plate
Service parts kit - Includes the left and right toner cartridge guides and their retaining clips - Mounts
toward the top center of the respective internal left and right side plates
Service parts kit - Includes the left and right toner cartridge guides and their retaining clips - Mounts
toward the top center of the respective internal left and right side plates
5
6
7
8
9
Left Side Plate Assembly 2
3
4
6
5
1
Ref
1
2
3
Part Number
XA9-1495-000CN
RM1-0836-020CN
WT2-5694-000CN
4
5
6
5851-1172
RA0-1197-000CN
5851-1172
Description
Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
Left plate assembly - Left side of internal printer mechanism - The printer formatter board mounts to
this plate
Snap-in cable clamp - Secures the cable from the fan assembly to the right side plate, the motor cable
from the laser/scanner assembly to the left side plate, and the drive motor cable to the metal support
pan (three used)
Service parts kit - Includes the left and right toner cartridge guides and their retaining clips - Mounts
toward the top center of the respective internal left and right side plates
Rubber foot
Service parts kit - Includes the left and right toner cartridge guides and their retaining clips - Mounts
toward the top center of the respective internal left and right side plates
9 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Engine Control Board and Support Pan
2
3
4
1
2
4 5
6
Ref
1
2
3
Part Number
XA9-0828-000CN
XA9-1420-000CN
Description
M3 pan head phillips screw with captive star washer - 4mm long - (S2) One of two size screws used to
secure the print engine control board to the support pan (This one is nearest the power receptacle)
M3 pan head phillips screw with captive flat and split-lock washers - 8mm long - (S3) Used to secure
the print engine control board to the support pan
RM1-0833-030CN Print engine control board - Provides motor drive, paper motion monitoring, printing control and po-
wer supply
RM1-0834-030CN Print engine control board - Provides motor drive, paper motion monitoring, printing control and po-
wer supply
RA0-1128-000CN Printed circuit board spacer - Mounts between the engine control PC board and the metal support pan
(six used)
4
5 WT2-5694-000CN Snap-in cable clamp - Secures the cable from the fan assembly to the right side plate, the motor cable
from the laser/scanner assembly to the left side plate, and the drive motor cable to the metal support
pan (three used)
RA0-1127-000CN Support pan (case) for the engine controller PC board - Metal pan which also acts as part of the bot-
tom of the printer
6
10 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Paper Pickup Assembly (1 of 2)
2
9
8
7
6 1
5
4
3
Ref
1
2
3
4
5
Part Number
XA9-1421-000CN
Description
M4x14 screw - (S4) Used in the paper pickup assembly and the fusing assembly (typically to secure
plastic to plastic parts)
RM1-0838-000CN Paper pickup assembly - Includes the pickup roller, paper feed roller assembly, separation pad, plastic
housing and other associated parts - Mounts in the bottom rear of the printer
RM1-0533-000CN Paper pickup shaft assembly - Includes the shaft, the two cams, pickup roller holder, and end cap -
Mounts in the paper pickup assembly
RM1-0851-000CN Paper sensor board - Small board with optical flag sensor (flag not included) - For sensing leading
edge of paper - Mounts on the paper feed assembly in the paper pickup assembly
RM1-0839-000CN Paper feed roller assembly - Includes feed roller, feed roller base assembly, retainer bushings, paper
input leading edge sensor, sensor flag and spring - Mounts on the bottom of the paper pickup assem-
bly
RA0-1072-000CN
RA0-1035-000CN
RA0-1200-000CN
RY7-5081-000CN
Grounding Plate - L-shaped, spring steel - Mounts on the left end of the paper pickup assembly
Torsion spring - Provides high voltage connection to the toner cartridge (developing cylinder) - Mounts
between the paper pickup roller and the transfer roller on the left side of the paper pickup assembly
Torsion spring - Provides high voltage connection to the toner cartridge (primary charging roller) -
Mounts behind the transfer roller on the left side of the paper pickup assembly
Gear/clutch assembly kit - Includes double-gear body, shaft attachment piece and spring - For driving
the paper feed roller
6
7
8
9
11 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Paper Pickup Assembly (2 of 2)
2
7
7
5 3
4
1
1
6
Ref
1
2
3
4
5
6
Part Number
XA9-1418-000CN
XA9-1421-000CN
Description
M3x6 TP screw - (S12) Used to secure the plastic brackets on each side of the paper pickup roller to
the metal plate
M4x14 screw - (S4) Used in the paper pickup assembly and the fusing assembly (typically to secure
plastic to plastic parts)
RM1-0838-000CN Paper pickup assembly - Includes the pickup roller, paper feed roller assembly, separation pad, plastic
housing and other associated parts - Mounts in the bottom rear of the printer
RM1-0840-000CN Paper lift plate assembly - Plastic plate assembly that includes the two blue paper width adjusters
- Mounts to the front of the paper pickup assembly
RA0-1003-000CN
RC1-1794-000CN
Rubber foot - For bottom of printer - Three used
Sub-pad arm - Small curved plastic arm - Help keeps remainder of paper stack in place while the top
sheet is picked - Mounts on each side of the separation pad assembly in the paper pickup assembly
(two used)
12 HP Ersatzteile für LaserJet 3380
+49 (0) 3723 / 6678 - 0
Fusing Assembly
3 9
8
1
1
2
5
4
6
1
7
Ref
1
2
3
4
5
6
7
8
9
Part Number
XA9-1421-000CN
XA9-1503-000CN
Description
M4x14 screw - (S4) Used in the paper pickup assembly and the fusing assembly (typically to secure
plastic to plastic parts)
M3 truss head (Flanged) phillips screw (Black oxide fnish) - 6mm long - (S6) Typically used to secure
plastic parts and the support pan to the metal side plates
RM1-2076-030CN Fusing assembly - Bonds toner to paper with heat - For 220V to 240VAC operation -
RA0-1089-000CN
RA0-1104-000CN
RF0-1003-000CN
17 tooth gear - Mounts on the end of the face-up output roller - Center gear of three gears on the
fusing assembly
Roller bushing/retainer - Mounts on the right end of the face-up output roller - Also retains the shaft
in the fusing assembly
Face-up (straight through) output roller - Metal shaft with two rollers - Mounts on the fusing assembly
behind the pressure roller
RM1-0852-000CN Delivery sensor PC board - Small board with optical flag sensor (flag not included) - For sensing paper
output - Mounts on the bottom center of the fusing assembly
RM1-0556-020CN Face-down delivery assembly - Includes the support frame, drive roller and gear, and the four spring
loaded pressure rollers - Mounts in the upper rear of the fusing assembly
RC1-2393-000CN Height flapper - Small plastic ‚L' shaped flapper - Helps to prevent face-down paper output from ba-
cking up into the fusing assembly - Snap-locks onto the face-down output roller in the fusing assembly
Stand: 17.10.2007, Alle Angaben ohne Gewähr.
top related