satellite tv antenna installation and maintenance
Post on 26-Feb-2022
17 Views
Preview:
TRANSCRIPT
SATELLITE TV ANTENNA INSTALLATION AND
MAINTENANCE
QCF/NVQ LEVEL I: ASSISTANT SATELLITE
TV ANTENNA INSTALLER.
2 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
QCF LEVEL 1:
ASSISTANT SATELLITE TV ANTENNA INSTALLER
Mandatory Units
S/No /Unit No
Reference Number
NOS Title Credit Value
Guided Learning Hours
Remark
1 ICT/SIM/001/L1 Principles and practices
of Health and Safety
3 30 Level 1 QCF
2 ICT/SIM/002/L1 Communication Skills in
Work Environment
2 20 Level 1 QCF
3 ICT/SIM/003/L1 Basic Principles and
Practice of Satellite TV
Antenna
3 30 Level 1 QCF
4 ICT/SIM/004/L1 Identify various Satellite
TV Antenna Components
and Accessories
3 30 Level 1 QCF
5. ICT/SIM/005/L1 Use various measuring
instruments/tools in
Satellite TV Antenna
installation and
maintenance.
3 30 Level 1 QCF
6. ICT/SIM/006/L1 Apply basic procedures
for Satellite TV Antenna
Assembly
2 20 Level 1 QCF
16 160
Optional Units
S/No /Unit No
Reference Number
NOS Title Credit Value
Guided Learning Hours
Remark
7 ICT/SIM/007/L1 Teamwork in carrying
Satellite TV Antenna
Installation.
2 20 Level 1 QCF
8 ICT/SIM/008/L1 Demonstrate
competency in Coaxial
Cable wiring for
Satellite TV Antenna
2 20 Level 1 QCF
9 ICT/SIM/009/L1 Demonstrate
knowledge of Basic
Electricity
2 20 Level 1 QCF
NOTE: This is a 20 credit qualification, to achieve this qualification; Learners are required to achieve 16
credits from mandatory units and 4 credits from the optional units. Each Credit is equivalent to approx. 10
Guided Learning Hours (GLH). The Total Learning Hours will therefore consist of the GLH plus the
independent learning hours of the candidate, which is generally 50% – 150% of the GLH. The actual Total
Learning Hours for each Credit will then be a minimum of 15 hours.
3 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
The Qualification purpose:
This qualification is for Assistant Satellite TV Antenna Installer, who is responsible for assisting
Satellite TV Antenna Installer in carrying out the installation work of a TV Satellite Antenna.
At the end of the Units, the learner will be able to:
1. Know the basic health and safety requirements in workplace environment.
2. Understand the importance of communication and team work in workplace environment.
3. Understand basic principles and practice of Satellite TV Antenna
4. Know how to identify various Satellite TV Antenna Components and Accessories
5. Understand various measuring instruments/tools used in Satellite TV Antenna installation
and maintenance.
6. Know basic procedures for Satellite TV Antenna Assembly
7. Understand basics of Coaxial Cable Wiring Installation
8. Understand concept of Basic Electricity.
Unit 1: Principles and Practices of Health and Safety
4 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Unit Reference Number: ICT/SIM/001/L1
QCF Level: 1
Credit Value: 3
Guided Learning Hours: 30
Unit Purpose: This unit is about health and safety in the working environment. At the end
of the Unit learners will be able to maintain good personal hygiene and carry out work
activity in a safe manner to prevent hazards.
Unit assessment requirements/evidence requirements:
Assessment must be carried out in real workplace environment in which learning and
human development is carried out. Simulation is allowed in this unit and level.
The evidences required for this Unit include:
Assessment methods to be used include:
1. Direct Observation/oral questions (DO)
2. Question and Answer (QA)
3. Witness Testimony (WT)
5 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
UNIT 01
LEARNING OBJECTIVE (LO) The learner will:
PERFORMANCE CRITERIA
The learner can:
Evidence Type
Evidence Ref. Page No.
LO 1:
Demonstrate
knowledge of
Occupational
Health and
Safety.
1.1 Explain occupational health and safety 1.2 Identify health and safety risks in satellite work 1.3 Identify environmental hazards in satellite dish
installation
1.4 Explain the effects of environmental hazards 1.5 Apply environmental protection methods
LO 2:
Demonstrate
understanding
of PPE
2.1 Wear clean and appropriate Personal Protective Equipment
2.2 Identify health ,safety and other relevant regulations and guidelines
2.3 Explain treatment of cuts, graze and wounds 2.4 Explain procedures of Reporting illness and
infection
2.5 State own responsibility under the (Nigeria factory Health and Safety Act, 2015) as it relates to own occupation
2.6 State general rules on hygiene that must be followed
LO 3:
Demonstrate
First Aid
Procedures and
Security of
Work
Environment
3.1 Explain first aid procedures for defined situations 3.2 Identify first aid materials/equipment and their
location
3.3 Select first aid materials 3.4 Apply first aid methods 3.5 State the importance of working in a healthy, safe
and secure workplace
3.6 Explain procedures of Reporting accidents or near misses.
3.7 Explain the procedures of waste disposal of organic and inorganic waste and Pollution control d
3.8 explain sound and noise control and protection methods and guidelines
LO 4:
Emergency
Procedures
4.1 Identify emergencies that may happen in your own occupation
4.2 Explain where to find the first-aid equipment and identify who registered first-aider is in the work place
4.3 Explain organizational emergencies procedures, in particular fire, and how these should be followed
4.4 State the possible causes of fire in the workplace 4.5 Explain how to minimize the possibility of fire in
the workplace
4.6 State where to find the alarms and how to set them off
6 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Learners Signature:
Date:
Assessors Signature:
Date:
IQA Signature (if sampled)
Date:
EQA Signature (if sampled)
Date:
7 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Unit 2: Communication Skills in Work Environment
Unit Reference Number: ICT/SIM/002/L1
QCF Level: 1
Credit Value: 2
Guided Learning Hours: 20
Unit Purpose: This unit is about effective communication skills in the working
environment. At the end of the Unit learners will be competent in maintaining good
communication skill among workers/clients in the work environment.
Unit assessment requirements/evidence requirements:
Assessment must be carried out in real workplace environment in which learning and
human development is carried out. Simulation is not allowed in this unit and level.
The evidences required for this Unit include:
Assessment methods to be used include:
1. Direct Observation/oral questions (DO)
2. Question and Answer (QA)
3. Witness Testimony (WT)
4. Work product (WP)
5. Assignment (ASS)
8 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
UNIT 02
LEARNING OBJECTIVE (LO) The learner will:
PERFORMANCE CRITERIA
The learner can:
Evidence Type
Evidence Ref. Page No.
LO 1:
Use of a non-complex
Communication in
Work Environment
1.1 Explain communication methods and use a simple verbal means to pass on necessary information
1.2 apply non-verbal means to pass necessary information, e.g. body language
1.3 Interpret symbols and signs appropriately
LO 2:
Identify the source of
information in a work
environment
2.1 identify the source of information in an organization
2.2 explain source of information 2.3 Explain the general information flow
systems in a work environment
2.4 Report findings in accordance to procedure in a work environment
LO 3:
Use of a various
Communication
means in a work
environment
3.1 Locate the various communication equipment in the work environment
3.2 Use effectively the general communication equipment in a work environment
3.3 Pass information effectively to the right personnel
3.4 Pass information effectively using symbols, signs and codes
3.5 Comply with general instructions in line with ethics of the work environment
Learners Signature:
Date:
Assessors Signature:
Date:
IQA Signature (if sampled)
Date:
EQA Signature (if sampled)
Date:
9 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Unit 3: Teamwork in Work Environment
Unit Reference Number: ICT/SIM/003/L1
QCF Level: 1
Credit Value: 2
Guided Learning Hours: 20
Unit Purpose: At the end of this Unit the learners will be able to apply team spirit and
develop positive working relationship with colleagues.
Unit assessment requirements/evidence requirements:
Assessment must be carried out in real workplace environment in which learning and
human development is carried out. Simulation is not allowed in this unit and level.
The evidences required for this Unit include:
Assessment methods to be used include:
1. Direct Observation/oral questions (DO)
2. Question and Answer (QA)
3. Witness Testimony (WT)
4. Assignment (ASS)
10 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
UNIT 03
LEARNING OBJECTIVE (LO) The learner will:
PERFORMANCE CRITERIA
The learner can:
Evidence Type
Evidence Ref. Page No.
LO 1:
Establish Positive
working
relationship with
colleagues
1.1 Explain positive working relationship 1.2 Describe the importance of relating with others in
the work environment.
1.3 Explain procedure of Communicating information to colleagues.
LO 2:
Take
responsibilities
within the team
2.1 Explain own role and responsibilities within a team
2.2 Explain own tasks in line with the team rules and regulations
2.3 Explain team work
LO 3:
Work in
compliance with
policy of
organisation
3.1 Explain organization code of practice 3.2 Explain organisation standards 3.3 Differentiate between code of practice and
standards
Learners Signature:
Date:
Assessors Signature:
Date:
IQA Signature (if sampled)
Date:
EQA Signature (if sampled)
Date:
11 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Unit 4: Principles and Practice of Satellite TV Antenna.
Unit Reference Number: ICT/SIM/004/L1
QCF Level: 1
Credit Value: 3
Guided Learning Hours: 30
Unit Purpose: At the end of this Unit the learners will be competent in applying the
principles and practice of Satellite TV Antenna installation.
Unit assessment requirements/evidence requirements:
Assessment must be carried out in real workplace environment in which learning and
human development is carried out. Simulation is not allowed in this unit and level.
The evidences required for this Unit include:
Assessment methods to be used include:
1. Direct Observation/oral questions (DO)
2. Question and Answer (QA)
3. Witness Testimony (WT)
4. Assignment (ASS)
12 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
UNIT 04
LEARNING
OBJECTIVE (LO)
The learner will:
PERFORMANCE CRITERIA
The learner can:
Evidenc
e Type Evidence
Ref.
Page No.
LO1:
Explain the Basic
Operation of
Communications
Satellite
1.1 Explain the history of communications
satellite
1.2 Define the following:
i. Satellite dish/Reflector Design
ii. Transmitter
iii. Receiver
iv. Transponder
v. Radio wave
vi. Satellite Footprint
1.3 Explain communications satellite
1.4 Distinguish between the earth satellite station
and the orbit satellite station
1.5 Explain the applications of a communications
satellite, (e.g. Weather forecasting, Radio and
TV broadcast, Military, Navigation, Global
Mobile Communication and connecting
remote areas)
1.6 Identify types of satellite communications
(e.g. INTELSAT, U.S.DOMSATS, Polar Orbit
Satellite)
1.7 Explain the advantages and disadvantages of
satellite communication
LO 2:
Describe the Basic
Operations of
Satellite Antennas
2.1 Identify the different types of antennas used in
communications satellite
2.2 Explain the functions of satellite antennas
2.3 Explain the applications of satellite antennas
2.4 Explain the use of common and special
satellite antennas
LO 3:
Describe the Basic
Operations of
Satellite Receiver
3.1 Explain the functions of a satellite receiver
3.2 Identify the various types of satellite
receivers
3.3 Describe the features of a satellite receiver
3.4 Explain the use of common and special
satellite receiver
Learners Signature:
Date:
Assessors Signature:
Date:
IQA Signature (if sampled)
Date:
EQA Signature (if sampled)
Date:
13 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Unit 5: Identify various Satellite TV Antenna Components and Accessories
Unit Reference Number: ICT/SIM/005/L1
QCF Level: 1
Credit Value: 3
Guided Learning Hours: 30
Unit Purpose: At the end of this Unit the learners will be competent in identifying and
using various Satellite TV Antenna components and accessories used in installation.
Unit assessment requirements/evidence requirements:
Assessment must be carried out in real workplace environment in which learning and
human development is carried out. Simulation is not allowed in this unit and level.
The evidences required for this Unit include:
Assessment methods to be used include:
1. Direct Observation/oral questions (DO)
2. Question and Answer (QA)
3. Witness Testimony (WT)
4. Assignment (ASS)
UNIT 05
14 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
LEARNING
OBJECTIVE (LO)
The learner will:
PERFORMANCE CRITERIA
The learner can:
Evidenc
e Type Evidence
Ref.
Page No.
LO 1:
Describe various
components of
Satellite TV
Antenna
1.1 Identify types of components used for the
satellite dish installation
1.2 Explain the applications of the components of
satellite TV Antenna
1,3 Describe the main features of the components
used in satellite dish installation
1.4 Explain the functions of Modulators
LO 2:
Describe various
accessories of
Satellite TV
Antenna
installation and
Maintenance
2.1 Identify types of accessories used for the
satellite dish installation
2.2 Explain the applications of the accessories
2.3 Describe the main features of the accessories
used in satellite dish installation
LO 3:
Demonstrate the
knowledge of
Business set up in
Satellite TV
Antenna
installation and
Maintenance
3.1 Explain customer relationship in satellite TV
Antenna business
3.2 Identify customer needs in satellite TV
Antenna business.
3.3 State government policy in relation to satellite
TV business
3.4 Describe how to set a business environment
in satellite TV Antenna installation
Learners Signature:
Date:
Assessors Signature:
Date:
IQA Signature (if sampled)
Date:
EQA Signature (if sampled)
Date:
15 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Unit 6: Use various measuring instruments/tools in Satellite TV Antenna installation
and maintenance.
Unit Reference Number: ICT/SIM/006/L1
QCF Level: 1
Credit Value: 3
Guided Learning Hours: 30
Unit Purpose: At the end of this Unit the learners will be competent in using various types
of measuring instruments and tools in Satellite TV Antenna Installation.
Unit assessment requirements/evidence requirements:
Assessment must be carried out in real workplace environment in which learning and
human development is carried out. Simulation is not allowed in this unit and level.
The evidences required for this Unit include:
Assessment methods to be used include:
1. Direct Observation/oral questions (DO)
2. Question and Answer (QA)
3. Witness Testimony (WT)
4. Assignment (ASS)
16 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
UNIT 06
LEARNING
OBJECTIVE (LO)
The learner will:
PERFORMANCE CRITERIA
The learner can:
Evidenc
e Type Evidence
Ref.
Page No.
LO 1:
Describe various
types of
measuring
instruments
1.1 Discuss types of measuring instruments used
in satellite TV Antenna installation
1.2 Explain the applications of the measuring
instruments.
1.3 5.1.1. Explain the following electrical
quantities:
Voltage
Current
Resistance
Frequency
Signal strength/quality
1.4 Use the instruments to measure the values of
the following electrical quantities: voltage,
current and resistance
LO 2:
Identify Various
Types of Tools
Used in Satellite
TV Antenna
Installation
2.1 Identify the types of tools needed to carry out
satellite TV Antenna installation work
- Pipe range
- Assorted screwdriver
- Open-end wrenches
- Dielectric grease
2.2 Mention the applications of tools used in
Satellite TV Antenna installation
2.3 Illustrate proper handling of tools.
2.4 Identify the advantages and disadvantages in
using each of the tools mentioned above.
LO3;
Mention the basic
procedures for
Satellite TV
Antenna
Assembly.
3.1 Select appropriate type of satellite TV
Antenna.
3.2 Select appropriate components from the
package to be used in satellite TV Antenna
assembly.
3.3 Select appropriate accessories from the
package to be used in satellite TV Antenna
assembly.
3.4 Explain step-by-step procedures of
assembling the satellite dish
3.5 Select tools needed to carry out the
assembling of the satellite dish
3.6 Assemble satellite TV antenna
17 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Learners Signature:
Date:
Assessors Signature:
Date:
IQA Signature (if sampled)
Date:
EQA Signature (if sampled)
Date:
18 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Unit 7: Knowing the basic procedures for Satellite TV Antenna Assembly
Unit Reference Number: ICT/SIM/007/L1
QCF Level: 1
Credit Value: 2
Guided Learning Hours: 20
Unit Purpose: At the end of this Unit the learners will be able to follow the procedures and
competently assemble Satellite TV Antenna.
Unit assessment requirements/evidence requirements:
Assessment must be carried out in real workplace environment in which learning and human
development is carried out. Simulation is not allowed in this unit and level.
The evidences required for this Unit include:
Assessment methods to be used include:
1. Direct Observation/oral questions (DO)
2. Question and Answer (QA)
3. Witness Testimony (WT)
4. Assignment (ASS)
19 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
UNIT 07
LEARNING
OBJECTIVE (LO)
The learner will:
PERFORMANCE CRITERIA
The learner can:
Evidence
Type Evidence
Ref.
Page No.
LO 1:
Apply basic
procedures for
assembling a
satellite TV
antenna
1.1 Select appropriate satellite TV antenna
1.2 Select the materials required for
assembling the satellite TV antenna
1.3 Identify and gather the right tools and
equipment.
LO 2:
Carry out
assembling of a
satellite TV
antenna
2.1 Identify the correct procedures for
assembling satellite TV antenna
2.2 Couple parabolic parts of the antenna
following the correct procedures
2.3 Couple antenna carrier/mounting base
following the correct procedures
LO 3:
Carry out
disassembling of
a satellite TV
antenna
3.1 explain the steps involved in
disassembling a complete satellite TV
antenna
3.2 Carry out the disassembling of a
parabolic parts of the satellite TV
antenna
3.3 Carry out the disassembling of a
carrier/mounting base of the satellite TV
antenna
Learners Signature:
Date:
Assessors Signature:
Date:
IQA Signature (if sampled)
Date:
EQA Signature (if sampled)
Date:
20 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Unit 8: Demonstrate competency in Coaxial Cable wiring for Satellite TV Antenna
Unit Reference Number: ICT/SIM/008/L1
QCF Level: 1
Credit Value: 2
Guided Learning Hours: 20
Unit Purpose: At the end of this Unit the learners will be competent in identifying and
using various types of coaxial cables wiring in Satellite TV Antenna Installation and
Maintenance.
Unit assessment requirements/evidence requirements:
Assessment must be carried out in real workplace environment in which learning and
human development is carried out. Simulation is not allowed in this unit and level.
The evidences required for this Unit include:
Assessment methods to be used include:
1. Direct Observation/oral questions (DO)
2. Question and Answer (QA)
3. Witness Testimony (WT)
4. Assignment (ASS)
21 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
UNIT 08
LEARNING
OBJECTIVE (LO)
The learner will:
PERFORMANCE CRITERIA
The learner can:
Evidence
Type
Evidence
Ref. Page
No.
LO1.
Demonstrate
knowledge of
Coaxial Cables.
1.1 Explain different types of coaxial
cables.
1.2 State the applications of coaxial
cables
1.3 Identify components and accessories
used in coaxial cable wiring.
LO2.
Demonstrate
knowledge of
Coaxial Cable
tools and
equipment.
2.1 Mention the type of tools and
equipment used in coaxial cable
wiring.
2.2 Demonstrate the uses of Coaxial
Cables tools and equipment.
2.3 List out trunking and surface wiring
accessories
2.4 List out conduit wiring accessories.
LO3. Apply basic
techniques of
lying Coaxial
Cable.
3.1 Carry out the punch-down wall
techniques.
3.2 Carry out the appropriate wall
drilling techniques.
3.3 Carry out the basic fasten clips
techniques.
3.4 Carry out the basic trunking
techniques.
3.5 Carry out simple conduit wiring
techniques.
LO4. Understand
termination of
Coaxial Cable in
wiring.
4.1 Conduct coaxial cable termination.
4.2. Setup the grounding box correctly
4.3. Terminate the coaxial cable and
hook it up.
4.4 Demonstrate the use of coaxial cable
conduit fittings.
Learners Signature:
Date:
Assessors Signature:
Date:
IQA Signature (if sampled)
Date:
EQA Signature (if sampled)
Date:
22 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
Unit 9: Demonstrate knowledge of Basic Electricity
Unit Reference Number: ICT/SIM/009/L1
QCF Level: 1
Credit Value: 2
Guided Learning Hours: 20
Unit Purpose: At the end of this Unit the learners will be able to apply basic principles of
electricity in the satellite TV antenna installation..
Unit assessment requirements/evidence requirements:
Assessment must be carried out in real workplace environment in which learning and human
development is carried out. Simulation is not allowed in this unit and level.
The evidences required for this Unit include:
Assessment methods to be used include:
1. Direct Observation/oral questions (DO)
2. Question and Answer (QA)
3. Witness Testimony (WT)
4. Assignment (ASS)
23 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
UNIT 09 LEARNING
OBJECTIVE (LO)
The learner will:
PERFORMANCE CRITERIA
The learner can:
Evidenc
e Type Evidence
Ref.
Page No.
LO 1:
Identify some
electrical
components and
their uses.
1.0 Explain the following electrical components:
i. Resistor
ii. Capacitor
iii. Transformer
iv. Inductor
1.2 Mention the uses of the above components
1.3 State colour code of resistors
1.4 State the meaning of the following:
i. Voltage
ii. Current
iii. Resistance
1.5 Explain soldering and its application in
electrical/electronics circuits
1.6 List the materials necessary to carry-out soldering
process
LO 2:
Distinguish the
difference between
AC and DC
current and
voltage
2.1 Explain the meaning of AC and
DC in electrical quantities.
2.2 State the basic sources of ac and dc quantities
2.3 State the basic applications of ac and dc
2.4 Mention common abbreviations used in
electrical/electronic circuit.
I = current
A = Ampere
C = Capacitor
V = Voltage
R = Resistor
L = Inductor
Sketch simple symbols of components used
in electrical/electronic circuit (e.g. resistor,
switch, socket outlet etc.)
2.5 List some common measuring instruments
used in electrical/electronic system
2.6 Measure voltage in a simple circuit using a
relevant instrument.
LO 3:
Describe
protective devices
and tools.
3.1 List the simple electrical tools used in domestic
installation
3.2 State the uses of each tool in carrying out domestic
installation work
3.3 Identify common types of protective devices such as:
circuit breakers and fuse.
Assessors Signature:
Date:
IQA Signature (if sampled)
Date:
EQA Signature (if sampled)
Date:
24 Nigeria National Vocational Qualification NVQ /QCF Level I and II in Satellite TV Antenna Installation and Maintenance
LISTOF RESOURCES REQUIRED FOR QCF LEVEL I
White Board
Diagram
Pictures
World Atlas
Audio-Visual aids
Antennas
Receivers
Hand glove
Helmet
Boots
Overall
Safety belt
Satellites TV Dish
Receiver
Low-Noise Block Feed horn
Mounting Base
Jack
R-F connector
Digital Satellite Equipment Control (DiSEqC)
Splitter
Cables
Scalar
Ruler
Positioner
top related