sap 47ee inst guide
Post on 07-Jun-2015
1.520 Views
Preview:
TRANSCRIPT
Sap R/3 4.7 EE Installation Procedure
SAP R/3 4.7 EE INSTALLATION PROCEDURE(Author: Mahendar Bolla)
System requirementsRAM > 512 MB (Preferred 1.0 GB)Hard Disk (HDD) > 120 GB (Can be installed on a 80 GB HDD also, but
20GB External HDD is required for SAP-R/3 DUMP)Processor > 2.4 GHz
Start Win 2000 / 2003 Server Setup using Win 2000 / 2003 Server Bootable CD
Note: Win 2000 / 2003 Professional CD not to be used
CREATING PARTITION ON HARD DISK DRIVE: Create 3 partitions (in case of 80 GB HDD, create 2 partitions)
C:\ Any size between 9,000 MB to 10,000 MBD:\ Any size between 65,000 MB to 70,000 MBE:\ Remaining Disk Space (in case of 80 GB HDD, E:\ will not exist)
We will use –C:\ To install Operating System (OS) i.e. Win 2000 / 2003 ServerD:\ To install SAP R/3 4.7 E:\ SAP R/3 DUMP. (In case of 80 GB HDD, E:\ will not exist)
(After completion of SAP-R/3 installation, SAP-R/3 DUMP can be deleted from E:\ and the disk space can be used for personal use)
OPERATING SYSTEM INSTALLATION ON C:\ Install Win 2000 / 2003 Server in C:\Give Computer Name STARR3 (Any of your choice)Note: Enter any Computer Name of your choice, remember the name will be required towards the end of SAP R/3 installation, after GUI installation
FORMAT D:\ and E:\Complete NTFS format on D:\ and E:\
SAP R/3 DUMP transfer to E:\After Win 2000 / 2003 Server Installation and formatting disk is completed. Create a folder in E:\ called DUMP (i.e. E:\DUMP)Copy all 3 DVDs (DB1 to DB3, Ker, Oracle817, OraPatches, etc) to E:\DUMP (In case of 80 GB HDD, copy 3 DVDs to the 20 GB External HDD)SAP R/3 s/w installation will be done from this E:\DUMP folder (Source folder).
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla1
Sap R/3 4.7 EE Installation Procedure
CHANGE SYSTEM YEAR TO INCREASE THE SAP R/3 EXPIRATION:
Advance (increase) the System Year by 4-5 years ahead of the current (installation) year. This is done to increase the SAP R/3 s/w expiration year.
For example if current year is 2006, advance the year to say 2010.
After SAP R/3 installation is complete bring back the system year to current year. i.e. change it back from 2010 to 2006
VIRTUAL MEMORY SETTING:
1. For Win 2003 Server - Right Click on My Computer (Desktop) Properties System Properties Advanced Tab Under Performance, click Settings On Performance Options screen, go to Advanced Tab Click Change
Select C:\ Select Custom Size Initial size (MB): 1000Maximum size (MB): 1500
Click Set OK OK
Select D:\ Select Custom Size Initial size (MB): 2500Maximum size (MB): 2550
Click Set OK OK
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla2
Sap R/3 4.7 EE Installation Procedure
VIRTUAL MEMORY SETTING (Contd.)2. For Win 2000 Server - Right Click on My Computer (Desktop) Properties System Properties Advanced Tab Performance Options Change
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla3
Settings for -Win 2003 Server
Sap R/3 4.7 EE Installation Procedure
Select Drive C:\Initial size (MB): 1000Maximum size (MB): 1500
Click Set OK OK
Select Drive D:\Initial size (MB): 2500Maximum size (MB): 2550
Click Set OK OK
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla4
Sap R/3 4.7 EE Installation Procedure
NETWORK ADAPTER INSTALLATION AND SETTING IP ADDRESS:
1. For Win 2003 Server - Click on Start Settings Control Panel
In the Control Panel window select Add Hardware Follows screen shorts
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla5
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla6
Sap R/3 4.7 EE Installation Procedure
Now Click Next FinishNetwork Adapter installation complete.
Setting IP Address (for Win 2003 Server): Right Click on ”My Network Places” icon (On Desktop) Click Properties Right Click on “Local Area Connection – Microsoft Loopback Adapter”
Click on Properties In the Local Area Connection Properties screen General Tab Select
Internet Protocol (TCP/IP) Click Properties In the Internet Protocol (TCP/IP) Properties screen Select Use the
following IP AddressIP Address: Enter your IP Address or 200.200.200.0
or 192.168.10.10 or 192.168.12.1Subnet mask: 255.255.255.0
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla7
Sap R/3 4.7 EE Installation Procedure
System gives a message that “DNS list is empty” Just Press OKIt will take some time to finish.
NETWORK ADAPTER INSTALLATION AND IP ADDRESS (Contd.)2. For Win 2000 Server - Click on Start Settings Control Panel
In the Control Panel window select Add/Remove Hardware
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla8
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla9
Sap R/3 4.7 EE Installation Procedure
Now Click Next FinishNetwork Adapter installation complete.
Setting IP Address (for Win 2000 Server): Right Click on ”My Network Places” icon (On Desktop) Click Properties Right Click on “Local Area Connection – Microsoft Loopback Adapter”
Click on Properties, then you will get below screen -
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla10
Sap R/3 4.7 EE Installation Procedure
System gives a message that “DNS list is empty” Just Press OKIt will take some time to finish.
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla11
Sap R/3 4.7 EE Installation Procedure
CHANGE usr Folder’s Properties in Win 2003 Server (No change required in Win 2000 Server)
Using Windows Explorer Go to C:\ Select folder usr Right click on folder usr Properties Security Tab make sure for each “Group or User Names” all “Permission for Administrators” are Allowed (every box is checked under “Allow”)
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla12
Sap R/3 4.7 EE Installation Procedure
ORACLE INSTALLATION:
For SAP-R/3 Version 4.7 Oracle 8i will be installed
For SAP-R/3 Version 4.7Go to Path: E:\ DUMP\Oracle817\NT\I386\setup.exe (where E:\ DUMP\ is the location where the installation s/w for SAP-R/3 4.7 is available)
Double Click on Setup.exe Click Next
Oracle Universal installer screen will appear.
Important Note: Destination Path: Must be set to drive where SAP-R/3 s/w needs be installed (in this case set to D:\ drive). Change only the drive specification, do not change any destination folders. (The screen shot destination is different – not to be confused, it is only to show how the screen looks like).
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla13
Sap R/3 4.7 EE Installation Procedure
Click Next
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla14
Sap R/3 4.7 EE Installation Procedure
Select Oracle8i Enterprise Edition 8.1.7.0.0 (1st option) Next Select Typical Installation (by Default) Next
Enter Global Database Name: ORANote: Automatically it will take SID: ORA (Do NOT change it)
Click Next Install
It will take 15-20 minutes to install
Once Oracle Database installation is completed – Dialogue Box will come –“Database Creation Complete” Click OK
Reboot System now
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla15
Sap R/3 4.7 EE Installation Procedure
Installing Oracle Patches (This was not taught by Venkat Rao)
Go to Services
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla16
Sap R/3 4.7 EE Installation Procedure
Stop All Oracle Services those are started
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla17
Sap R/3 4.7 EE Installation Procedure
Click All Next
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla18
Sap R/3 4.7 EE Installation Procedure
JAVA INSTALLATION:
From E:\DUMP – (where E:\ DUMP\ is the location where the installation s/w for SAP-R/3 4.7 is available)
Double Click on j2sdk-1_4_2_06-windows-i586-p.exeORDouble Click on j2sdk-1_4_2-nb-3_5_1-bin-windows.exe
* Check the file name, there will be only one JAVA installation file *
Next Accept C:\Program Files\j2sdk (Needs to the same drive where OS is installed) Next YES Next (Do not enter any Server or any information, just leave them blank) Next Finish
Note: In case of any error – At least one system failed Click OK
JAVA INSTALLATION (Contd.)Setting Environment Variables:
Right Click on My Computer Click Properties Go to Advanced TAB Click Environment Variables button in the User Variables section Click New
Variable Name: JAVA_HOMEVariable Value: C:\Program Files\j2sdk_nb\j2sdk1.4.2
(where C:\ is the OS Drive)
Click OK OK OK OK
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla19
Sap R/3 4.7 EE Installation Procedure
Back door method how to find the -Variable Value: C:\Program Files\j2sdk_nb\j2sdk1.4.2
Right click on Start Explore Program Files find the JAVA folder j2sdk Find the JAVA folder j2sdk1.4.2
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla20
Sap R/3 4.7 EE Installation Procedure
KERNEL INSTALATINON:
Installing NT PATCH
From E:\DUMP Folder KER Folder NT Folder I386 Folder NTPATCH Double click on R3DLLINS.EXE OK
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla21
Sap R/3 4.7 EE Installation Procedure
From E:\DUMP Folder KER Folder SAPINST Folder NT Double click on SETUP.CMD I Agree Standard Next Reboot now OK YES System Reboots here
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla22
Sap R/3 4.7 EE Installation Procedure
Installing Central Instance
After System Restarting, system will starts Central Instance installation automatically
Select SAP R/3 Enterprise 4.7 for Oracle Next
I Agree Install Server Components (Do not change default settings) Next Enter SAP System ID: ERP (Any 3 character) Central Instance Next x 3 Local Installation Next Next
Password: 123Confirm: 123
Next Password: 123Confirm: 123
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla23
Sap R/3 4.7 EE Installation Procedure
Select install Server Components Click Next
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla24
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla25
Sap R/3 4.7 EE Installation Procedure
Note: Must Select Local Installation
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla26
Sap R/3 4.7 EE Installation Procedure
Give Password: 123 or sap(Any password, but try to use short numeric password)
Give same Password, as entered earlier: 123 or sap
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla27
Sap R/3 4.7 EE Installation Procedure
Just Click Next
Now installation will be started, it will take 4-5 minutes.
Installation finished successfully Click OK
Reboot System here
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla28
Sap R/3 4.7 EE Installation Procedure
KERNEL INSTALATINON (Contd.)
Database InstanceStart Programs SAPinst ORACLE KERNEL Prepare New Installation
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla29
Sap R/3 4.7 EE Installation Procedure
Start Programs SAPinst ORACLE KERNEL SAPinst Server with GUI
Follow the Screen Shorts below –
I Agree Install Server Components (Do not change default settings) Next Enter SAP System ID: ERP (Any 3 character) Central Instance Next x 3 Local Installation Next Next
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla30
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla31
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla32
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla33
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla34
Sap R/3 4.7 EE Installation Procedure
Driver for Database Server Directories Select the SAP R/3 installation drive (in this case D:\)Select the SAP R/3 installation drive (in this case D:\)
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla35
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla36
Sap R/3 4.7 EE Installation Procedure
Give same Password, as entered earlier: 123 or sap
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla37
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla38
Sap R/3 4.7 EE Installation Procedure
Browse and give location of folder EXPORT1, from folder db1 (in this case the path will be D:\DUMP\DB1\EXPORT1)
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla39
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla40
Sap R/3 4.7 EE Installation Procedure
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla41
Sap R/3 4.7 EE Installation Procedure
Browse and give location of folder EXPORT2, from folder db2 Browse and give location of folder EXPORT3 to EXPORT7, from folder db3 (in this case the path will be D:\DUMP\DB2\EXPORT2 and D:\DUMP\DB3\EXPORT3, D:\DUMP\DB3\EXPORT4,D:\DUMP\DB3\EXPORT5, D:\DUMP\DB3\EXPORT6,D:\DUMP\DB3\EXPORT7
Click OK (Don’t Change any passwords) Click Start
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla42
Sap R/3 4.7 EE Installation Procedure
Don’t Change any passwords
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla43
Sap R/3 4.7 EE Installation Procedure
Select - No MNLS Support required (if only language required is ENGLISH) MNLS Support required (if other languages like German, French, etc.
are also required with English)
Now installation will be startedIt will take 10 -15 Hours to complete
At the end (after 10 -15 Hours) select continue installation and click Next
If you get any error message, don’t click retry immediately. Wait for 10 minutes and then click retry
After getting message – “Installation finished successfully” Click OK
Shut down Server (if Server is ON)Reboot System
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla44
Sap R/3 4.7 EE Installation Procedure
TEST IF SAP R/3 SERVER STARTS / IS WORKING PROPERLY
After system reboots – Double click on the “SAP R/3 System Management
Console” icon to start server
Open SAP R/3 System Management Console from desktop
Click on ‘+’ Symbol which is beside of ‘SAP R/3 System’.
Click all ‘+’ symbols to expand all nodes.
Right Click On DRS (ERP) StartClick on Process ListIn the right side of window you will see strdbs.exe is startingWait until Msgserver and Dispatcher comes to Green Color. Click on Refresh button for every 20 seconds
After getting Green status Click on WP Table (Left Side of the screen)It will show a list of Services
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla45
Sap R/3 4.7 EE Installation Procedure
Please wait until ‘Status’ of all services comes to “Wait” (Presently ‘Status’ may be “Run”) AND ‘Start’ column shows “yes”Click on Refresh button for every 20 seconds to refresh the screen.
After SAP R/3 Server STARTS successfully, wait for 2-3 minutes, then turn OFF the SAP R/3 Server and go for the GUI Installation
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla46
In Status column all “Wait”And
In Start column all “yes”Indicates SERVER has started
successfully
Sap R/3 4.7 EE Installation Procedure
GUI INSTALLATION
Note: Make sure the SAP R/3 Server is turned OFF before GUI Installation From E:\DUMP Folder SAPGUI620 Folder GUI Folder WINDOWS Folder WIN32 Double click on SETUP.EXE Next
OR
From E:\DUMP Folder SAP_GUI_620 Folder SAPGUI_620 Folder GUI Folder WINDOWS Folder WIN32 Double click on SETUP.EXE Next
Important: Make sure drive selected is the OS Drive (in this case C:\) Next
Click “Select All” Next Install Finished
It might take 10 – 15 minutes, it may ask to restart computer, if asked then restart system and start SAP services, and continue from here.
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla47
Sap R/3 4.7 EE Installation Procedure
USER CREATION
After GUI Installation - Double click on the “SAP R/3 System Management
Console” icon to START Server
Note: Make sure the SAP R/3 Server is turned ON now
Note: The status under WP Table - In Status column all “Wait” and in Start column all “yes”. Indicates SERVER has started successfully
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla48
Sap R/3 4.7 EE Installation Procedure
After GUI Installation a new Icon for “SAP Logon” will be there on the Desktop
Double click on SAP Logon icon
Click ”New” button and give following settings -
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla49
Sap R/3 4.7 EE Installation Procedure
Description SAP R/3 (Any name)Application Server STARR3 (Enter the Computer Name)(Note: STARR3 is the Computer Name given while OS installation process) SAP System R/3System number 00Click OK
Note: Make sure the SAP R/3 Server is turned ON
Now click Logon button
Create 1 st Client 000 Client 000Username DDICPassword 19920706
Click Enter button Click Enter button SAP Easy Access screen is launched
Enter T-Code: SU01
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla50
Sap R/3 4.7 EE Installation Procedure
Enter Username SAPUSER or sapuser (Not CASE sensitive)Click F8 or Create icon
Under Address TAB Select Title Mr. / Ms.Enter Last Name SAP (Any Name, try not to use your name)Enter First Name SAP (Any Name, try not to use your name)
Select Logon Data TAB Initial Password 123Repeat Password 123
Select Profiles TAB Under Profile column enter
SAP_NEWSAP_ALL
Select and highlight the rows for SAP_NEW and SAP_ALLClick SAVE icon (Ctrl+S)
Select Back icon (F3)Select System Log Off
Now click Logon button
To make sure the 1 st Client 000 is working Client 000Username SAPUSER or sapuser (Not CASE sensitive)Password 123
Click Enter button
Will prompt to enter –
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla51
Sap R/3 4.7 EE Installation Procedure
New Password india (Enter Password of your choice now)Repeat Password India
Click Enter button Click Enter button
If SAP Easy Access screen is launched, 1st Client 000 is working successfully
Select System Log Off
Now click Logon button
Create 2 nd Client 800 Client 800Username DDICPassword 19920706
Click Enter button Click Enter button SAP Easy Access screen is launched
Enter T-Code: SU01Enter Username SAPUSER or AnyName (Not CASE sensitive,
this will be the Username for Client 800)Click F8 or Create icon
Under Address TAB Select Title Mr. / Ms.Enter Last Name SAP (Any Name, try not to use your name)Enter First Name SAP (Any Name, try not to use your name)
Select Logon Data TAB Initial Password 123
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla52
Sap R/3 4.7 EE Installation Procedure
Repeat Password 123
Select Profiles TAB Under Profile column enter
SAP_NEWSAP_ALL
Select and highlight the rows for SAP_NEW and SAP_ALLClick SAVE icon (Ctrl+S)
Select Back icon (F3)Select System Log Off
Now click Logon button
To make sure the 2 nd Client 800 is working Client 800Username SAPUSER or AnyName (Enter same Username as
created for Client 800)Password 123
Click Enter button
Will prompt to enter –New Password india (Enter Password of your choice now)Repeat Password India
Click Enter button Click Enter button
If SAP Easy Access screen is launched, 2nd Client 800 is working successfully
Enter T-Code: SE38
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla53
Sap R/3 4.7 EE Installation Procedure
Program zxzx (Any garbage characters)Click Create button
Access Key 36687663221261278694Click Enter button
Title zxzx (Any garbage characters)Type Select any type from drop down menuClick Save button
CHANGE SYSTEM YEAR TO CURRENT YEAR:After SAP R/3 installation is complete bring back the system year to current year. i.e. change it back from 2010 to 2006
SAP R/3 INSTALLATION IS COMPLETEAND IS READY TO USE
Sap R/3 4.7 EE Installation Procedure Mahendar Bolla54
top related