sagama pneumatico 500
Post on 30-Jul-2016
245 Views
Preview:
DESCRIPTION
TRANSCRIPT
Commercial offer
Sagama Pneumatico 500 Waste tire recycling production line.Recycling 500 kg of tires per hour.
Business "from scratch"!• Ready-made investment solution!• Quick startup!• Great service support!• Patented technical decisions for the quick pay-back.• The growing world demand for rubber crumb and coating is a
great time to start!• Russian currency inflation makes prices more attractive now!
Catch your chance!• USSR tires type is the hardest to recycle, that's why in case it
works with our tires it will certainly work with any other!!!
en.sagamagroup.com
Sagama LTD31, Primorsky ave., Tolyatti, Russia
Web-site: http://en.sagamagroup.com/http://sagama.trustpass.alibaba.com/
E-mail: export2@sagamagroup.comSkype: vitali.bogdanovPhone: +37257675685
en.sagamagroup.com
Sagama Pneumatico 500 is a tire-recycling factory. It includes a broad range of customized shredders and granulators, which have higher efficiency, toughness and consistency.
This production line was created to recycle waste tires (Diameter is up to 1.2 m). Productivity is 500 kg tires per hour (3000 tons a year).
Introduction Sagama Pneumatico 500 production line(500 kg of tires per hour)
SAGAMA Pneumatico 500Tire recycling line
Technical characteristics
Installed power 150 kW/hr
Average power consumption 100 kW/h
Input 500kg/hr
Output (depends on raw material) up to 350 kg/h
Max outer diameter of waste tires up to 1280mm
Recommendations to working conditions two 10-12 hours shifts
(considering technical rules)
Number of workers per shift 4 people
Tire recycling volumes per year (300 working days,
20 working hours)
up to 3000 tons
Requirements for premises
* Attention! To help you with process of service online monitoring it is necessary to have:
• At least 2Mbps high-speed Internet connection with static IP address• Great lighting , at least 200 lux
The end products of tire recycling can be roughly divided into 3 product groups:
1. Rubber crumb.Rubber crumb is used, for example, for the production of artificial turf, safety mats for playgrounds, anti-slip mats etc.2. Steel.The steel that is attained from the various size reduction steps can be reused as raw material in the
steel industry. The purity of the steel depends on the size and the design of the separation
technology.
3. Textile Fibers.
The textile fibers attained from the different size reduction steps are a valuable secondary fuel.
en.sagamagroup.com
5 m
10 m30 m
S=300m2
SAGAMA Pneumatico 500Tire recycling line
Equipment specification
NO.Device
Name
Specifics. Size, weight
(kg)
Power
consumption,
kW
Quantity Photo
1Control
console
Control console is intended to
control the line
1250х400х1800,100
- 1
2Steel wire
debeader
It removes bead wire from
landing ring. Output: bead
wire without permissions and
rubber component of tire.
Productivity: 15-40 tires per
hour. It is about 750 – 1000
kg/h.
4430х960х1500, 1200
11 1
3Hydraulic tire
cutter
It is intended to cut tires into
2 pieces (tire dimension is up
to 1.2m.) If tire bigger than
1.2m – need be cut into 3-4
pieces).
1850х2100х810, 1200
7,5 1
4 Сutter
Up to 700 kg / hour
The rotational speed of 7.1
rev / min
Power 1.5 kW
Blades – hardened tool steel
7,5 1
5Belt conveyer
№ 1
It is designed to transfer
massive chips (weight is about
2,5 kg and thickness is
maximum 40 mm) to the first
phase Crusher.
3400х1000х2350, 350
1,5 1
6Shredder №1
(first step of
crushing)
Shredder №1 (first step of
shredding). It is intended to
shred 100x100 chips to 30x30
chips.
Productivity: 700 kg/h.
Knives - hardened tool steel.
Rate speed:62rpm.
2000х910х1860,2000
37 1
en.sagamagroup.com
SAGAMA Pneumatico 500Tire recycling line
NO.Device
Name
Specifics. Size, weight
(kg)
Power
consumption,
kW
Quantity Photo
7Belt conveyer
№ 2
Transferring 30x30 chips to
Shredder №2 (average level
of crushing).
Rotation velocity: 30 rpm.
Productivity: 1500kg/h.
3400х1000х2350,350
0,75 1
8Shredder №2
(average step
of crushing)
Shredding 30x30 chips to
12x12 chips.
Productivity: 700 kg/h.
Knives - Hardox steel.
Rotation velocity: 60 rpm.
2000х910х1795,1700
30 1
9Belt conveyer
№ 3
Transferring 30x30 chips to
magnetic filter.
Productivity: 1500 kg/h.
Rotation velocity: 30 rpm.
3400х1000х2350,350
0,75 1
10Magnetic
filter
It is intended to separate
metal cord from 12x12 rubber
chips.
Rotation velocity: 30 rpm.
Productivity: 1500kg/h.
1200х600х1800,150
30 1
11 Chopper
It is intended to crush 12x12
rubber chips to rubber crumbs
up to 5-8mm.
Blades – Hardened tool steel
Rotation velocity of rotor: 600
rpm. Productivity: 350kg/h х
2 Belt gearing Netting size is
5 mm. 1850х870х1575,1500
18,5 1
en.sagamagroup.com
SAGAMA Pneumatico 500Tire recycling line
NO.Device
Name
Specifics. Size, weight
(kg)
Power
consumption,
kW
Quantity Photo
12Rotary
chopper
It is intended to crush 12x12
rubber chips to rubber crumbs
up to 5mm.
1850х870х1575, 1500
37 1
13 Vibrating silo
Designed for mechanical
separation into fractions of bulk
materials,
by sieving them through a grid
with a given hole size, using
an oscillatory motion in a vertical
and horizontal planes generated
motor-vibrators.
Productivity - 500 kg / h;
The resulting fraction (base case)
1) more than 8 mm; 2) 5.8 mm; 3)
less
2,2 2
14Dust
collecting
system № 1
It is intended to remove textile
cord which is accumulate in
Crushers and Vibrating screens
№1 and №2.
Productivity: 1530-3300 m3/h.
Dust is collected into sleeve filter.
1300х1300х4500,500
4 1
15
Magnetic
filter of
vibrating
screen
Is for the metal cord
separation from 5 mm rubber
crumbs.
1400х600х2250, 230
0,75 1
16Vibrating
screen № 1
It is intended to clean 5 mm
rubber crumbs from textile.
2300х1100х1100, 350
0,52 1
en.sagamagroup.com
SAGAMA Pneumatico 500Tire recycling line
NO.Device
Name
Specifics. Size, weight
(kg)
Power
consumption,
kW
Quantity Photo
17Vibrating
screen № 2
It is intended to clean 0,1-4,5
mm rubber crumbs from
textile. Then rubber crumbs
are divided in to two types of
fractions: 0,1-2 mm и 2-4,5
mm.
2300х1100х750, 350
0,52 1
18Exhaust
ventilation
system № 2
It is intended to clear air from
dust and for the heat
rejection. 1300х1300х4500,
500
5,5 1
19Conveyer
screw
It is intended for 5 mm rubber
crumbs transportation to the
magnetic filter.
3300х350х350, 200
1,5 3
20Aspiration
system
It is intended to transfer
rubber crumbs from magnetic
filter to Crushers №1, №2. It
also separates textile cord
from rubber crumbs.
2,86 м3б, 360
4 1
en.sagamagroup.com
SAGAMA Pneumatico 500Tire recycling line
Main product – Rubber crumb
The recycling line can be reconfigured quickly for the different size granules producing (from 1 to 5 mm).
So you will be able to produce the most popular product on the market!
0 – 0,65 mm 0,65 – 2 mm
en.sagamagroup.com
SAGAMA Pneumatico 500
2 – 5 mm
Where to use
en.sagamagroup.com
SAGAMA Pneumatico 500Tire recycling line
Ourservices
PRE – service
- Help with a project designing! Business planning.
MID – service
- We sent our engineers to set up the line and make trainings!
- By joining to the SAGAMA partner network, you get access to this market information and consultation!
AFTER SALE – service
- Remote monitoring complex through IP video surveillance!
- 1 year after-sale warranty!
- Marketing support: catalogues, booklets, boards layouts, website support!
- Online technical monitoring for the each equipment node using engines loads control system! It allows you to build the most effective line operation and prevents malfunction!
en.sagamagroup.com
SAGAMA Pneumatico 500Tire recycling line
en.sagamagroup.com
Ouradvantages
- Ready-made investment solution!
- 10 years producing experience!
- Great service support!
- Patented technical decisions for the quick pay-back.
- The growing world demand for rubber crumb and coating is a great time to start!
- Russian currency inflation makes prices more attractive now! Catch your chance!
- The production line quick reconfiguration for the differentstructure granules (fraction from 1 to 5 mm). So you will be able toproduce the most popular product on the market!
- The unique precision cleaning system and multistage crumbseparation from textile fibers and metal cord ensures the crumbpurity (without metal and textile inclusions)!
- USSR tires type is the hardest to recycle, that's why in case itworks with our tires it will certainly work with any other!!!
- Quick startup!
SAGAMA Pneumatico 500Tire recycling line
Certification
en.sagamagroup.com
SAGAMA Pneumatico 500Tire recycling line
Packing and shipment
en.sagamagroup.com
Our company
SAGAMA Pneumatico 500Tire recycling line
Success projects
en.sagamagroup.com
Video
Also you can view how it works via links:
Recycling process:https://www.youtube.com/watch?v=nF_mfZkyuF4
Company presentation:https://www.youtube.com/watch?v=Qw3gH0YE5qA
SAGAMA Pneumatico 500Tire recycling line
We invite you to visit our company in Russia!
en.sagamagroup.com
You will be able to see our production, our clients companies and their SAGAMA systems in process!
So you will see by your own eyes how another companies use our product!
Vitaliy Bogdanov
E-mail: export2@sagamagroup.comSkype: vitali.bogdanovPhone: +37257675685
Contacts
SAGAMA Pneumatico 500Tire recycling line
top related