safety lampholders and pendants - rs components · 2019. 10. 13. · integral rl624 ceiling rose...
Post on 01-Feb-2021
1 Views
Preview:
TRANSCRIPT
-
520
Safety products are desig-ned to make life easy foryou. When the lamp isremoved from the lampholder body the power isautomatically disconnectedat the contacts - ensuringthat there is no risk ofaccess to live parts.
You can be sure that yourclients or tenants are safefrom risk of shock. In addi-tion the safety range is theonly product on the marketto comply with the newBritish Standard BS 7895for safety enhanced pro-ducts with high temperatu-re resistance. And with aLifetime Guarantee as stan-dard you can just fit andforget!
The inner body of the lampholder is a separate moving partwhich rotates as the lamp is twistedinto place.
Clip on terminal cover preventscasual removal. Integral cordgrip andeasier to access screws and termi-nals allow faster wiring.
Made from an advanced high tempe-rature polymer (resistant up to 210ºC),all lampholders are T2 rated.
The solid switching action ensures that the contacts only beco-me live when a lamp is fully insertedand held correctly in place by the ‘J’slots.
Safety Lampholders and Pendants
-
521
Ash
ley
All products are designed and testedto comply with new British Standard BS 7895 for safetyenhanced products.
Large multiple knockouts for easiercable installation and twin earth ter-minals will easily accommodate up to 4 earth con-ductors and are positioned for easeof cable access.
Angled terminal back for ease ofwiring. Cables can be cut to thesame length because all terminals are in-line.
Lifetime guarantee on majority ofproducts.
Ashley
Safety lampholders 522
Safety pendant set 523
-
522
Safety Lampholders
• Complies with BS 7895• T2 = heat resistance rating
(210ºC)• Automatically disconnect
power at the contacts whenthe lamp is removed
• 50.8mm fixing centres fornon-access versions. Usewith mounting blocksMB326E/MT
• Solid brass plungers andcopper plated steel springsmaintain plunger pressure throughout their long life
• Body angle of angled battensset at 30º
• Access lampholders haveintegral RL624 ceiling rosebase and heat resisting PVCtails
• All pendants incorporateautomatic cord grips andsleeve caps for ease of flexi-ble cord stripping
• Home office shield enclosesthe lamp cap for extra safety(enabling compliance withBS 7671 in locations contai-ning bath or shower)
Description Cat Ref.
20
20
Bayonet cap cord grip lampholdersSafety cord grip lampholders - short skirt
Safety cord grip lampholders - home office shield
SEL212
SEL214
20Straight BC batten lampholder3 terminal, home office shield SEL354
10
10
Access BC batten lampholderStraight, 2 terminal body, 3 terminal and earth base, home office shield
Angled, 2 terminal body, 3 terminal and earth base, home officeshield
SEL96T
SEL106T
Pack qty.
SEL212
SEL214
SEL354
SEL96T
-
523
Safety Pendant Sets
Ash
ley
Ceiling rose• Pendant set complies with
BS EN 60598 -1 : 2000• Capacity of each terminal:
3 x 1.00mm2 conductor• Common base with ‘access’
batten lampholders
• Barriers between terminals• Flexible pendant cord
restraining hooks• Fixing centres 50.8mm• Feet on base to aid mounting
on uneven surfaces
• 3 separate knockouts accept1, 2 or 3 x 1.5mm2 conduc-tors
Description Cat Ref.
10
10
10
10
10
10
Pendant sets with access ceiling roseSafety pendant set 6’’, short skirt
Safety pendant set 9’’, short skirt
Safety pendant set 12’’, short skirt
Safety shield pendant set 6’’, home office shield
Safety shield pendant set 9’’, home office shield
Safety shield pendant set 12’’, home office shield
624SEL2126
624SEL2129
624SEL21212
624SEL2146
624SEL2149
624SEL21412
10Super access terminal bank type ceiling roseAccess terminal bank type Ceiling rose 3 terminalDimensions: 81mm dia x 26mm (halo = 108dia)
RL624
1Low Energy Pendant LE212/6
Pack qty.
624SEL2126
624SEL2129
-
524
Ashley is a market leaderrenowned for the quality ofits junction boxes. Themost comprehensive range avai-lable. Slot terminals andknockout entries facilitateease of wiring and cablepositioning.
Solid brass terminals and screws, forexcellent conductivity and positiveclamping of conductors.
Selective entry for cables. Large capacity slot terminals forunbroken ring circuit installations.
Extra strong terminals to hold multi-ple conductors.
Junction Boxes
-
525
Ash
ley
Ashley
Junction boxes 526
-
526
Junction Boxes
• Complies with BS 6220• Slot terminals are ideal for
taking spurs off uncut ring or loop circuit cables
• Solid machined brass terminals
• Junction box covers secured by single centre screws (apart from J701 which has two screws)
• J701 and J701/TB junction / adaptable box will accept 16mm x 16mm and /or 16mm x 25mm mini-trunking
Description Fixing Terminalcentres capacity
Cat Ref.
20Knockout slot terminal junction boxJunction box - brown 20 Amp 4 terminalDimensions: 59mm dia x 25mm
32mm 3 x 1.5mm2 J201
10
10
10
Selective entry slot terminal junctionboxesJunction box - brown 20 Amp 4 terminalDimensions: 79mm dia x 26mm
Junction box - brown 30 Amp 3 terminal Dimensions: 89mm dia x 32mm
Junction box - brown 20 Amp 6 terminalDimensions: 89mm dia x 26mm
50.8mm 3 x1.5mm2
50.8mm 4 x2.5mm2
50.8mm 3 x 1.5mm2
J301
J401
J601
5
5
Junction / adaptable boxJunction box - no terminalsDimensions: h = 122mm x w = 156mm x d = 32mm
Junction box - with terminal block,Cable ties and related wiring cardDimensions: h = 122mm x w = 156mm x d = 32mm
4 x 1.5mm2
J701
J701/TB
Pack qty.
J201
J301
J401
-
527
Ash
ley
Junction Boxes
10Downlighter Junction BoxJunction box complete with incomingand outgoing cable clamps.3 plate terminals with separate terminalsfor flexible cords.Dimensions: h = 52mm x w = 53mm x d = 27 mm
J501
Description Cat Ref.Pack qty.
JB701/TB
-
528
The Ashley IP66 range of switches and sockets aredesigned to provide powerand control in harsh envi-ronments around the home,in commerce and in industry.
The products are rated toIP66 in accordance withBS EN 60529 and will with-stand dust and water jetingress. Their housings aremade from UV stabilisedchemically resistant polycarbonate to ensurehigh impact resistance anda long maintenance freelife.
The attractive, ergonomicdesign and subtle greycolour of Ashley IP66 swit-ches and sockets will ensu-re their ready acceptancein all locations, that areheavily exposed to dustand splashing water.
Products are dust tight and can beused with a pressure hose.
The neoprene seals will not sticktogether, and do not need replacing.
The neoprene seals will not stain thecable.
Product has easy to open catch.
Weather Plus
-
529
Ash
ley
Lid can be closed fully when 13Aplug with cord grip is inserted.
Ashley
IP66 Switches 530
IP66 Bell push 530
IP66 Sockets 531
IP66 FCU 532
IP66 RCD 532
IP66 Timer socket 532
-
530
IP66 - Switches and Bell Push
• IP66 rated to BS EN 60529(see page 8.6)
• Fixing holes are for No. 8 woodscrews (not supplied)
• The enclosure has 4 x 20mm entries, 1 on each side
• These switches (except push switches) do NOT have to be derated when used with fluorescent or inductive loads
• Earth terminal supplied in back box
• Switch cable capacity 3 x 2.5mm2
• All products supplied with neon indicators
• All switches are AX rated
Switches• Complies with BS 60669-Pt1
Description entries Cat Ref.
1
1
1
4 x 20 mm
4 x 20 mm
4 x 20 mm
SwitchesSingle pole switch 1 gang 2 way 10 Amp Dimensions: h = 92mm x w = 88mm x d = 67mm
Single pole switch 2 gang 2 way 10 AmpDimensions: h = 92mm x w = 88mm x d = 67mm
Double pole switch 1 gang 20 AmpDimensions: h = 92mm x w = 88mm x d = 67mm
WPS12
WPS22
WPS14
4 x 20 mmBell pushOne gang bell pushDimensions: h = 92mm x w = 88mm x d = 67mm
WBP12
Pack qty.
WPS12
WPS22
-
531
IP66 - Sockets
Ash
ley
4 x 20 mm
4 x 20 mm
4 x 20 mm
• IP66 rated to BS EN 60529(See page 8.6)
• Fixing holes are for No. 8 woodscrews (not supplied)
• The enclosure has 4 x 20mm entries, 1 on each side
• Socket cable capacity 3 x 2.5mm2
• Earth terminal supplied in back box
Sockets• Complies with BS 1363 Pt. 2• IP66 rated to BS EN 60529• SRCD complies with BS7288
- Operation is passive• SRCD continues to protect
with- Loss of neutral- Pulsating DC earth fault
• SRCD provides disconnectionof both live and neutral poles in the event of an earth fault
Description entries Cat Ref.
1
1
1
SocketsOne gang switched socket 13 Amp Dimensions: h = 130mm x w = 115mm x d = 73mm
Two gang switched socket 13 AmpDimensions: h = 130mm x w = 155mm x d = 73mm
RCD protected socketPulsating D.C. and A.C. Fault current sensitive 30mA Control circuit 240V A.C. 50Hz onlyDimensions: h = 130mm x w = 155mm x d = 73mm
WSS81
WSS82
WSS82R30
Pack qty.
WSS81
WSS82
WSS82R30
-
532
IP66 - FCU, RCD, Timer Socket
• IP66 rated to BS EN 60529(See page 8.6)
• Fixing holes are for No. 8 woodscrews (not supplied)
• Each switch is fitted with a neon which can be wired as a locator
• The enclosure has 4 x 20mm entries, 1 on each side of the back box
• Earth terminal supplied in back box
• FCU and socket terminal capacity 3 x 2.5mm2
• RCD spur operation is passive
Sockets• Complies with BS 1363 Pt. 2• IP66 rated to BS EN 60529
Description entries Cat Ref.
1
1
1
4 x 20 mm
4 x 20 mm
4 x 20 mm
One gang switched fused spur 13AmpDimensions: h = 130mm x w = 115mm x d = 73mm
One gang RCD spurDimensions: h = 130mm x w = 115mm x d = 73mm
Combined timer and socketDimensions: h = 130mm x w = 155mm x d = 73mm
WSSU83
WSU83R30
WSS81TS24
Pack qty.
WSSU83
WSU83R30
WSS81TS24
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages false /GrayImageMinResolution 150 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 72 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages false /MonoImageMinResolution 300 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects true /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName (http://www.color.org) /PDFXTrapped /False
/Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > > /FormElements true /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MarksOffset 6 /MarksWeight 0.250000 /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PageMarksFile /RomanDefault /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice
top related