s expert engineers in aurangabad (mh)

S EXPERT ENGINEERSSimple & Cost Effective solution to Tough Problem In Measurements

ABOUT US

S.E.E an organization started in the year 2011 is a growing organization

which serves more than 100 customers to become renowned &

established brand in the field of gauges.

We are the leading organization in Designing and manufacturing of

special gauge (Relation gauge; acceptance gauge) where in we provide

the most simple and cost effective solution to your toughest problems.

Apart from Special gauge we have the strength to provide Standard gauge

like

Plug gauge

Snap gauge

Ring gauge and many more in steel and carbide.

This team is driven by

Partner Rohan Mehta young Mechanical engineer

Post Graduated from Indo-German Tool Room

Two years Experience in Tooling industries and

Partner S.P.Kothari B.E-Mechanical in 1974

16 years of experience in precision industries like bearing and gauge

manufacturing

20 years in manufacturing gauges as Partner.

S.E.E has a highly dedicated team patronized by Experience thus

providing a platform to grow as both individual and as a team.

UNIVERSAL COMPARATOR

A Universal Dial type of gauge where in the Outer Diameter, Inner Diameter, Concentric, run-out, lobbing, etc can be checked for various sizes

VERTICAL COMPARATOR STAND

A Universal Dial type of gauge to check Groove height, length, Groove center-axis, hole–center /axis

RELATION GAUGES

Designed to check Hole drilled at angle to the flat face

WIDTH GAUGE

Working principle is same as that of plug gauge; these gauges are suggested for those jobs in which the groove or slot in the component are to be checked.

SNAP GAUGE

A correctly machined part will pass the first set of jaws and stop at the second — end of test. In this manner a part may be checked in one action, unlike the plug gauge that needs to be used twice and flipped to access the second gauge.

RING GAUGE

Ring Gauge working principle is same as that of snap gauge; these gauges are suggested for those jobs in which the center less machining is done where the problem of lobbing is generally observed and where close tolerance are present.

ACCEPTANCE GAUGE

It is a special gauge where in two or more than two parameters can

be checked simultaneously; which will indicate only OK condition.

INCLINE COMPARATOR

A Universal Dial type of gauge where in the Outer Diameter, Inner Diameter, Concentricity, run-out, lobbing, etc can be checked for various sizes.

CONTACT US

S EXPERT ENGINEERS Company Type: Manufacturer

Contact Person: Mr. Satish Kothari

Mobile No 9225317248

Concern Person: Mr. Rohan Mehta

Concern Person No: 7755918690

Phone: +91 0240 2553318

Visit: http://seegauges.com

Address: K-122/2, First Floor, MIDC Waluj, Aurangabad-431136

Area: Waluj MIDC Aurangabad

City: Aurangabad MH