revision notes ionic & covalent bonding
Post on 23-Nov-2014
116 Views
Preview:
TRANSCRIPT
Ionic Bonding - Metal Compounds
Comparing the electron arrangements of the first 20 elements
Elements in the same Vertical Group have electron arrangements with the same number of electrons in the
outer shell. (energy level)
The number of electrons in the outer shell (energy level) is the same number as the Group number; ie.
Elements in Group II have 2 electrons in their outer shells; (energy levels) Elements in Group V have 5
electrons in their outer shells. (energy levels)
When atoms react, it is their outer parts (their outer electron shells or energy levels) which collide. Atoms with
the same number of electrons in their outer shells (energy levels) show similar chemical reactions because of
this.
The "Noble" or "Inert" gases, Group VIII, are highly stable elements and have highly unreactive atoms. This is
because their atoms have a FULL outer electron shell. (energy level)
Elements react with other elements so as to try to become unreactive. It is the outermost electron shells
(energy levels) of atoms that interact when atoms collide and react. Atoms try to gain a full outer shell (energy
level) of electrons, similar to that of the nearest Inert Gas, by losing or gaining electrons.
Look at the elements SODIUM and CHLORINE.
Ionic Bonding - Sodium Chloride
SODIUM and CHLORINE react together to form a white crystalline solid called SODIUM CHLORIDE. Sodium
chloride has a very high melting point, 8080C, conducts electricity when it is molten and dissolves in water to form a
solution that also conducts electricity. The solid sodium chloride does not conduct electricity. This being the case,
the electrical conductivity of sodium chloride cannot be due to "free" electrons that roam throughout the structure
between the atoms as what happens in metals. Its conductivity in liquid or solution forms and non-conductivity in
solid form must be due to the fact that when molten or liquid, the particles that make up sodium chloride must be
able to move whereas they were in fixed positions when solid and so could not move.
To better understand the structure and bonding in sodium chloride, we will have to take a closer look at the
electron configuration or structure of their atoms.
Na has 1 electron in the outer shell MORE than a noble gas (NEON 2.8) whereas Cl has 1 LESS than a noble gas
(ARGON 2.8.8).
When atoms react, they try to lose or gain electrons in their outer energy shell in order to get their outer shell
FULL. If an atom has 1, 2 or 3 electrons in their outer energy shell, they try to LOSE these electrons to the atoms 1
they wish to react with. This particular outer energy shell disappears, leaving the next electron shell as the outer
shell and this shell is FULL.
METALS react in this way because metals are located in Groups I, II, or III in the Periodic Table and contain 1, 2 or
3 electrons in their outer energy shell.
SODIUM can react and become stable by losing 1 electron from its outer energy shell. This energy shell
disappears and the next one that contains 8 electrons becomes a FULL OUTER ENERGY SHELL.
CHLORINE can react and become stable by either LOSING 7 OUTER ENERGY SHELL ELECTRONS or by
GAINING 1 ELECTRON into its outer energy shell. This now becomes full containing 8 electrons. It is obviously
far easier to gain 1 electron than to lose 7. If an atom has 7, 6 or 5 electrons in its outer energy shell, it gains a full
outer energy shell by GAINING electrons.
NON-METALS react in this way because non-metals are located in Groups V, VI and VII in the Periodic Table and
contain 5, 6 or 7 electrons in their outer energy shell and so are 3, 2 or 1 electron short of a full shell.
METALS LOSE ELECTRONS TO NON-METALS, WHICH GAIN THEM.
Sodium + Chlorine Sodium Chloride
2 Na + Cl2 2 NaCl ( Na+ Cl− )
Calcium Sulphide
Formula = CaS
Calcium + Sulphur Calcium Sulphide
2
11 protons and only 10 electrons (a 1+ ION)
One SODIUM atom is required to lose an electron to one CHLORINE atom, which gains it.
17 protons but 18 electrons (a 1− ION)
Ca + S CaS ( Ca2+ S2-)Magnesium Fluoride
Now we will look at what happens when a metal atom with TWO electrons in its outer energy level combines with a
non-metal with 7 electrons in its outer energy level.
Magnesium atoms are 2.8.2 and become magnesium ions, 2.8.
Fluorine atoms are 2.7 and become Fluoride ions, 2.8.
Formula = MgF2
Magnesium + Fluorine Magnesium Fluoride
Mg + F2 MgF2 ( Mg2+ (F-)2 )
Now draw electron energy shell (dot and cross) diagrams to show the formation of LITHIUM OXIDE and
MAGNESIUM SULPHIDE.
Other compounds to do: -
LITHIUM FLUORIDE; POTASSIUM FLUORIDE; SODIUM SULPHIDE; CALCIUM OXIDE;
MAGNESIUM CHLORIDE; MAGNESIUM OXIDE; ALUMINIUM FLUORIDE.
3
Magnesium needs to lose 2 electrons. Since Fluorine has only one space for an electron in its outer level, TWO Fluorine atoms are needed. The formula is
MgF2 and contains
Magnesium ions, Mg2+
and
Fluoride ions, F−.
Ionic Bonding - Metal Compounds
Write the title. Read the information sheet on “Ionic Bonding – Metal Compounds and then answer the questions.
Questions write out the following questions/statements and complete them.
1. The Noble Gases are unreactive because they have a full shell of eight electrons and so they do not need
to lose or gain any.
2. The Group 1 elements called the alkali metals, such as sodium (complete) have all got one electron in their
outer shells. In order to achieve the electron configuration of the nearest Noble gas, they have to lose
(lose/gain) one electron.
3. The Group 7 elements, called halogens, such as chlorine (complete) have all got seven electrons in their
outer shells. In order to achieve the electron configuration of the nearest Noble gas, they have to gain
(lose/gain) one electron.
4. Draw the dot and cross diagrams to show SODIUM reacting with CHLORINE to form SODIUM
CHLORIDE.
5. Underneath each electron shell diagram, show the electron configuration of each atom and each ion (in the
form of 2.8.1 for example)
6. Write a balanced symbol equation for the reaction between Na and Cl2.
2Na + Cl2 -> 2NaCl
7. Answer Q4 to 6 for the compounds listed at the bottom of page 3 of the information sheet.
4
Figure 1: Ionic lattice - NaCl
Covalent Bonding – Non – metal Compounds
This type of bonding is found when non-metal elements combine with other non-metal elements to form non-metal
compounds. Non-metal elements want to GAIN electrons because they have 1, 2 or at most 3 electrons LESS in
their outer energy levels than a full level. When combining with metal atoms, they gain these electrons from the
metal atoms. When atoms of two non-metal elements combine, atoms of BOTH elements wish to GAIN electrons.
In order to overcome this problem, the atoms of the two elements involved in bonding SHARE the number of
electrons each requires to gain a full level.
eg HydrogenEach Hydrogen atom requires one more electron in order to
complete its outer shell. Therefore it has to be prepared to share
one of its own. Both Hydrogen atoms share their only electron and
overlap their electron shells so that their only electron belongs to
both outer shells of both atoms.
The pair of electrons is called a COVALENT BOND and attracts the
nuclei of both individual atoms in the molecule together by
electrostatic forces of attraction. However, unlike in the case with ions in metal compounds which attract other
oppositely charged ions around them in all directions, the forces of attraction from the covalent bond pair of
electrons does not spread out beyond the molecule and so, although the atoms within the molecule are held
together by strong forces, molecules attract other molecules with only weak forces.
Hydrogen is a GAS.
Methane, Carbon Hydride.
CARBON atoms have 4 electrons in their outer levels. They need to gain 4 more electrons to get a full outer level
and so must SHARE 4 of its own. Hydrogen has one electron in its outer level and also needs to GAIN electrons,
but only one.
The outer shells of 4 Hydrogen atoms overlap with the outer shell of the Carbon atom. Each Hydrogen provides
the Carbon atom with one electron, so all 4 Hydrogen atoms will provide Carbon with the 4 electrons that it needs.
In exchange, the carbon atom shares one of its electrons with each of the four Hydrogen atoms so that they, too,
now have a full outer level of 2 electrons.
One Hydrogen atom shown bonding to the Carbon atom
with its electron and one of Carbon's outer shell
electrons now in the outer the shells of BOTH Carbon
AND Hydrogen.5
All four Hydrogen atoms shown bonded to
Carbon in METHANE, CH4 .
The atoms are held together by the electrostatic force of attraction between the electrons that are being "SHARED"
and the positively charged nucleuses of the two bonding atoms.
This bond is called an "ELECTRON PAIR COVALENT BOND".
We can draw simpler electron diagrams showing this type of bonding without drawing all the electrons. We just
consider only the OUTER energy level electrons and assume that the inner levels are there and full, but we do not
draw them.
We draw the electrons of one atom as DOTS and those of the other atom as CROSSES.
Each dot and cross electron pair is a COVALENT
BOND.
Draw electron level diagrams for the following compounds. Predict their formulas, draw dot and cross diagrams as
well as atom and stick bond diagrams.
Hydrogen Chloride
Ammonia (Nitrogen Hydride)
Water
Carbon Dioxide
6
Hydrogen Chloride
Water
Ammonia
Carbon Dioxide
The element gases, Hydrogen, Chlorine, Oxygen and Nitrogen
Individual atoms are highly reactive because they do not have a "FULL OUTER
ENERGY LEVEL". For this reason, TWO atoms join together, sharing
electrons in order to enable each other to have full outer energy levels. For
this reason, these element gases are DIATOMIC. (molecules containing TWO
atoms).
Other molecules to consider are Ethane and Ethene.
7
Formula O2
Formula H2
Formula Cl2
Formula N2
top related