resume - web1.fkm.utm.myweb1.fkm.utm.my/userfiles/file/cv staf academic new...3 • name of position...
Post on 28-Jun-2019
217 Views
Preview:
TRANSCRIPT
RESUME
1.0 PERSONAL DETAILS
• Name : Ariffin Abdul-Razak, Ph.D
• I/C No. : 8283717 @ 630510-71-5185
• Nationality : Malaysian
• Date of Birth : 10 of May, 1963
• Place of Birth : Singapore
• Maritial Status : Married with 6 children
• House Address : 14, Jalan Harmoni 15 Taman Desa Skudai 81300 Skudai
Johor Darul Ta’zim
• Telephone No. (H) : +607-554 8531
• Telephone No. (H/P) : +6012-748 6062
• Office Address : Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 Skudai Johor Darul Ta’zim
• Telephone No. (O) : +607-553 4571
• Facsimile No. (O) : +607-556 6159
2
2.0 ACADEMIC QUALIFICATIONS
• Year : 1998 Name of Degree : Doctor of Philosophy (Ph.D) Specialization : Manufacturing Engineering Name of University : Heriot-Watt University Place : Scotland, United Kingdom
Title of Thesis : Detection of Feature Interactions in An Object-Oriented Feature-based Design System
• Year : 1992 Name of Degree : Master of Philosophy (M.Phil) Specialization : Manufacturing Engineering Name of University : Loughborough University of Technology Place : England, United Kingdom Title of Thesis : A Design-with-Features Approach for Rotational Machined Components
• Year : 1986 Name of Degree : Bachelor Engineering Kejuruteraan Jentera Specialization : Mechanical (Production) Engineering Name of University : Universiti Teknologi Malaysia Place : Kuala Lumpur Title of Thesis : Design of Plant Layout System for Rattan-
based Furniture
3.0 PRESENT POSITION Name of Position : Senior Lecturer Date of Appointment : 22 September, 2012
4.0 ADDITIONAL RESPONSIBILITIES
• Name of Position : Member of Evaluation Panel Division/Faculty : Malaysian Qualifications Agency (MQA) From : 12 September, 2011 Until : 11 September, 2014
• Name of Position : Member of Evaluation Panel Division/Faculty : Malaysian Qualifications Agency (MQA) From : 12 September, 2008 Until : 11 September, 2011
3
• Name of Position : GMI External Advisor for KKTM Balik Pulau Guided Project
Division/Faculty : German Malaysian Institute (GMI) From : 9 March, 2008 Until : 28 June, 2008
• Name of Position : Academic Advisor for 1SMP Students Division/Faculty : Mechanical From : July, 2005
Until : At Present
• Name of Position : Member of Final Year Project Committee Division/Faculty : Mechanical Engineering From : 1 July, 2005
Until : 30 June, 2007
• Name of Position : Acting Head of Panel Division : Manufacturing Engineering From : 18 December, 2004 Until : 26 January, 2005
• Name of Position : Member of Academic Board of Faculty Division/Faculty : Mechanical Engineering From : 18 December, 2004 Until : 26 January, 2005
• Name of Position : Member of Academic Curriculum of Faculty
Division/Faculty : Mechanical Engineering From : 18 December, 2004
Until : 26 January, 2005
• Name of Position : Member of Evaluation Panel Division/Faculty : National Board of Accreditation (LAN) From : 23 September, 2004 Until : 15 Februari, 2006
• Name of Position : Member of Academic Publication of Faculty Division/Faculty : Mechanical Engineering From : 1 May, 2004
Until : 30 April, 2006
• Name of Position : Head of Panel Division : Manufacturing Engineering From : 1 January, 2004 Until : 26 August, 2004
4
• Name of Position : Member of Academic Board of Faculty Division/Faculty : Mechanical Engineering From : 1 January, 2004 Until : 26 August, 2004
• Name of Position : Member of Academic Curriculum of Faculty
Division/Faculty : Mechanical Engineering From : 1 January, 2004 Until : 26 August, 2004
• Name of Position : Member of Evaluation Panel Division/Faculty : National Board of Accreditation (LAN) From : 24 September, 2002 Until : 23 September, 2004
• Name of Position : Head of Panel Division : Manufacturing Engineering From : 1 June, 2001 Until : 31 May, 2003
• Name of Position : Member of Academic Board of Faculty Division/Faculty : Mechanical Engineering From : 1 June, 2001 Until : 31 May, 2003
• Name of Position : Member of Academic Curriculum of Faculty
Division/Faculty : Mechanical Engineering From : 1 June, 2001 Until : 31 May, 2003
• Name of Position : Member of Academic Publication of Faculty Division/Faculty : Mechanical Engineering From : 15 March, 2001 Until : 14 March, 2003
• Name of Position : Member of Evaluation Panel Division/Faculty : National Board of Accreditation (LAN) From : 1 August, 2000 Until : 31 July, 2002
• Name of Position : Acting Head of Panel Division : Manufacturing From : 1 September, 1999
5
Until : 31 January, 2000
• Name of Position : Member of Academic Board of Faculty Division/Faculty : Mechanical From : 1 September, 1999 Until : 31 January, 2000
• Name of Position : Acting Head of Laboratory Division : Production From : 1 September, 1999 Until : 31 January, 2000
• Name of Position : Co-ordinator for FKM Division/Faculty : Program Khas Pensiswazahan Guru From : 1 November, 1999 Until : 31 April, 2000
• Name of Position : Head of Panel Division/Faculty : Panel of Production From : 1 October, 1998 Until : 15 January, 1999
• Name of Position : Academic Advisor for 1SMP Students Division/Faculty : Mechanical From : July, 1998 Until : June, 2002
• Name of Position : Member of Academic Board of Faculty Division/Faculty : Mechanical From : 1 October, 1998 Until : 15 January, 1999
• Name of Position : Head of Panel Division/Faculty : Panel of Production From : February, 1993 Until : November, 1993
• Name of Position : Head of Laboratory Division/Faculty : Metal Fabrication Lab From : 1992 Until : 1993
• Name of Position : Co-ordinator Division/Faculty : Workshop Practical Training From : 1988 Until : 1989
6
• Name of Position : Co-ordinator Amali Subjects Division/Faculty : Workshop From : 1988 Until : 1989
• Name of Position : Head of Workshop Division/Faculty : Workshop Practical Training From : 1988 Until : 1989
• Name of Position : Academic Advisor for 1SKJ Students Division/Faculty : Faculty of Mechanical From : 1987 Until : 1993
• Name of Position : Head of Laboratory Division/Faculty : Foundry From : 1987 Until : 1988 5.0 PREVIOUS EXPERIENCES 5.1 External Name of Position : Production Executive Officer Company : Pencala General Trading Sdn. Bhd. From : 1 July, 1986 Until : 30 September, 1986 5.2 Internal Name of Position : Assistant Lecturer 'A' Faculty/Division : Mechanical Engineering From : 26 December, 1986 Until : 31 December, 1991 6.0 LECTURING & SUPERVISING 6.1 Lecturing
• Session : 2013/2014
7
Semester : I Level : Master & Bachelor Engineering
Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course ii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 1 – SMI) iii. SME 3931 : Engineering Lab – Year 3
• Session : 2012/2013 Semester : II
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) – Kuala Lumpur
ii. MMP 2663 : Advanced Manufacturing Technology (AMT) – Master by Course iii. SMR 4722 : Advanced Manufacturing Technology (AMT) – Year 4 (SMP) iv. SME 3942 : Industrial Engg. Lab. - Year 3 v. SMU 3742 : Advanced Manufacturing (AMT) – SPACE (FPPSM – JB)
• Session : 2012/2013 Semester : I
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and
Assembly (DFMA) – Master by Course ii. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) – KKTM (Penang)
iii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 1 – SMI) iv. SME 3931 : Engineering Lab – Year 3 v. SMU 3742 : Advanced Manufacturing (AMT) – SPACE (FPPSM – KL)
• Session : 2011/2012 Semester : II
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) – German-Malaysia Institute (GMI)
ii. MMP 2663 : Advanced Manufacturing Technology (AMT) – Master by Course iii. SMR 4722 : Advanced Manufacturing
8
Technology (AMT) – Year 4 (SMP) iv. SME 3942 : Industrial Engg. Lab. - Year 3
• Session : 2011/2012 Semester : I
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and
Assembly (DFMA) – Master by Course ii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 1 – SMI)
• Session : 2010/2011 Semester : II
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) – German-Malaysia Institute (GMI)
ii. SMR 4722 : Advanced Manufacturing Technology (AMT) – Year 4 (SMP) iii. SME 3942 : Industrial Engg. Lab. - Year 3
• Session : 2010/2011 Semester : I
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and
Assembly (DFMA) – Master by Course ii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 1 – SMI) iii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 2 – SMP)
• Session : 2009/2010 Semester : II
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) – Kuala Lumpur
ii. SMN 4882 : Advanced Manufacturing Technology (AMT) – Year 4 (SMI) iii. SMR 4722 : Advanced Manufacturing Technology (AMT) – Year 4 (SMP) iv. SME 3942 : Industrial Engg. Lab. - Year 3
9
• Session : 2009/2010 Semester : I
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and
Assembly (DFMA) – Master by Course ii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 1 – SMI) iii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 2 – SMP)
• Session : 2008/2009 Semester : II
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) - Penang
ii. SMN 4882 : Advanced Manufacturing Technology (AMT) – Year 4 (SMI) iii. SMR 4722 : Advanced Manufacturing Technology (AMT) – Year 4 (SMP) iv. SME 3942 : Industrial Engg. Lab. - Year 3
• Session : 2008/2009 Semester : I
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and
Assembly (DFMA) – Master by Course ii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 1 – SMI) iii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 2 – SMP)
• Session : 2007/2008 Semester : II
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) – Kuala Lumpur
ii. SMN 4882 : Advanced Manufacturing Technology (AMT) – Year 4 (SMI) iii. SMR 4722 : Advanced Manufacturing Technology (AMT) – Year 4 (SMP) iv. SMU 3713 : Manufacturing Processes – Year 2 (FPPSM) (Section 1)
10
v. SMU 3713 : Manufacturing Processes – Year 2 (FPPSM) (Section 2)
• Session : 2007/2008 Semester : I
Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and
Assembly (DFMA) – Master by Course ii. SMR 5713 : Design for Manufacture and Assembly (DFMA) – Year 5 iii. SMR 4713 : Design for Manufacture and Assembly (DFMA) – Year 4 iv. SME 3931 : Machine Shop Lab. - Year 3
• Session : 2006/2007 Semester : II
Level : Bachelor Engineering Subjects : i. Advanced Manufacturing Technology
(AMT) – Year 3 (FPPSM) ii. Manufacturing Processes – Year 2 (FPPSM) iii. Engineering Module. - Year 4
• Session : 2006/2007 Semester : I
Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course
ii. Design for Manufacture and Assembly (DFMA) – Year 4 iii. Machine Shop Lab. - Year 3
• Session : 2005/2006 Semester : II
Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course (Pesisir)
ii. Manufacturing Processes – Year 2 (FPPSM)
iii. Engineering Module - Year 4
• Session : 2005/2006 Semester : I
Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course
ii. Design for Manufacture and Assembly
11
(DFMA) – Year 4 iii. Metrology Lab. - Year 3
• Session : 2004/2005 Semester : II
Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course (Pesisir) ii. Advanced Manufacturing Technology
(AMT) - Year 4 (FPPSM) iii. Engineering Module - Year 4
• Session : 2004/2005 Semester : I
Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course
ii. Design for Manufacture and Assembly (DFMA) – Year 4 iii. Machine Shop Lab. - Year 3
• Session : 2003/2004 Semester : II
Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course (Pesisir) ii. Manufacturing Processes – Year 3
iii. Engineering Module - Year 4
• Session : 2003/2004 Semester : I
Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course
ii. Design for Manufacture and Assembly (DFMA) – Year 4 iii. Machine Shop Lab. - Year 3
• Session : 2002/2003 Semester : II
Level : Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) - Year 4
ii. Manufacturing Automation - Year 3 iii. Machine Shop Lab. - Year 3
• Session : 2002/2003
12
Semester : I Level : Master & Bachelor Engineering
Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course
ii. Metal Forming Technology - Year 4 iii. Lab. Module - Year 4
• Session : 2001/2002 Semester : II
Level : Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) - Year 4
ii. Manufacturing Automation - Year 3 iii. Machine Shop Lab. - Year 3
• Session : 2001/2002 Semester : I
Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) - Master by Course
ii. Advanced Manufacturing Technology (AMT) - Year 4 iii. Lab. Module - Year 4
• Session : 2000/2001 Semester : III
Level : Bachelor Engineering Subjects : i. Metal Forming Technology - Year 4
• Session : 2000/2001 Semester : II
Level : Bachelor Engineering Subjects : i. Machine Shop Lab. - Year 3 (Section 1)
ii. Machine Shop Lab. - Year 3 (Section 2) iii. Advanced Manufacturing Technology (AMT) - Year 5
• Session : 2000/2001 Semester : I
Level : Bachelor Engineering Subjects : i. Machine Shop Lab. - Year 3 (Section 1)
ii. Machine Shop Lab. - Year 3 (Section 2) iii. Advanced Manufacturing Technology (AMT) - Year 5
• Session : 1999/2000 Semester : November
13
Level : Bachelor Engineering Subjects : i. Machine Shop Lab. - Year 3 (Section 1)
ii. Machine Shop Lab. - Year 3 (Section 2) iii. Advanced Manufacturing Technology (AMT) - Year 5
• Session : 1999/2000 Semester : June
Level : Bachelor Engineering Subjects : i. Manufacturing Processes - Year 3
ii. Lab. Module - Year 4 iii. Advanced Manufacturing - Year 5
• Session : 1998/99 Semester : December
Level : Bachelor Engineering Subjects : i. Manufacturing Automation - Year 3 and 4
ii. Advanced Manufacturing - Year 5
• Session : 1998/99 Semester : June
Level : Bachelor Engineering Subjects : i. Manufacturing Processes - Year 2 ii. Lab. Module - Year 4
iii. Design for Manufacturing - Year 5
• Sessi : 1997/98 Semester : December
Level : Bachelor Engineering Subject : i. Manufacturing Automation - Year 4
ii. Production Lab - Year 3
• Session : 1993/94 Semester : July
Level : Diploma Subject : i. Production Technology - Year 2
ii. Metrology Lab - Year 2
• Session : 1992/93 Semester : December
Level : Bachelor Engineering Subject : i. Production Technology - Year 3
ii. Metrology Lab - Year 2
• Session : 1992/93 Semester : July
Level : Diploma
14
Subject : i. Production Technology - Year 2 ii. Metrology Lab - Year 2 iii. Static - Year 1
• Session : 1991/92 Semester : December
Level : Bachelor Engineering & Diploma Subject : i. Production Technology - Year 4
ii. Metrology Lab - Year 3 iii. Metrology Lab - Year 2
• Session : 1991/92 Semester : July
Level : Diploma Subject : i. Production Technology - Year 2 ii. Metrology Lab - Year 2
• Session : 1989/90 Semester : July
Level : Bachelor Engineering Subject : i. Production Technology - Year 3
ii. Metrology Lab - Year 2
• Session : 1988/89 Semester : December
Level : Bachelor Engineering & Diploma Subject : i. Static - Year 1
ii. Engineering Drawing - Year 1 iii. Experimental Technique - Year 1
• Session : 1988/89 Semester : July
Level : Bachelor Engineering & Diploma Subject : i. Static - Year 1
ii. Engineering Drawing - Year 1 iii. Experimental Technique - Year 1
• Session : 1987/88 Semester : December
Level : Bachelor Engineering & Diploma Subject : i. Production Technology - Year 2
ii. Production Lab - Year 2
• Session : 1987/88 Semester : July
Level : Diploma & Bachelor Engineering Subject : i. Production Technology - Year 2
15
ii. Production Lab - Year 2 iii. Metrology Lab - Year 2
• Session : 1986/87 Semester : December
Level : Diploma Subject : i. Production Technology -Year 2
ii. Production Lab - Year 2 iii. Metrology Lab - Year 2
6.2 Project Supervision 6.2.1 Post-Graduate Level
• Level : Master Engineering (By Course) Session : 2012/2013
Semester : II No. of Students : 3 i. Student : Mohd Faezal Bin Omar Baki
Title : Product Design Improvement Through Theory of Inventive Problem Solving (TRIZ) Approach and Design for Manufacture and Assembly (DfA) Methodology for Consumer Product
ii. Student : Mohd Hafiz Abdul Karim
Title : Invention Through Integration of Theory of Inventive Problem Solving (TRIZ) and Design
for Manufacture and Assembly (DfMA) Methodologies for Automotive Front End Structure
iii. Student : Ainni Binti Alias
Title : Product Design Improvement Through Design for Assembly (DfA) and Theory of Inventive Problem Solving (TRIZ) Methodologies
• Level : Master Engineering (By Course) Session : 2012/2013
Semester : I No. of Students : 5 i. Student : Afshin Aslian
Title : Invention Through Integration of Theory of Inventive Problem Solving (TRIZ) and Design for Manufacturing and Assembly (DfMA)
16
ii. Student : Mohd Darnalis Bin Abdul Rahman Title : Cellular Manufacturing System Development for Machine-Part Cell Formation and
Operation Sequencing
iii. Student : Nuryusliha Binti Hamzah Title : Invention Through Integration of Design For Assembly (DfA) and Theory of Inventive Problem Solving (TRIZ) Methodologies
iv. Student : Khairul Anuar Bin Mohd Jais
Title : Product Design Improvement Through Design for Assembly (DfA) Methodology and Theory of Inventive Problem Solving (TRIZ) Approach
v. Student : Jerrize Izah Binti Jamalludin
Title : Product Design Improvement Through Design for Assembly (DfA) and Theory of Inventive Problem Solving (TRIZ) Methodologies
• Level : Master Engineering (By Course) Session : 2007/2008
Semester : I No. of Students : 1 i. Student : Wiwiek Fatmawati
Title : Analysis of Product Disassemblability Using the Disassembly Evaluation Chart Methodology
• Level : Master Engineering (By Course - Pesisir) Session : 2007/2008
Semester : I No. of Students : 1 i. Student : Baizura Binti Zubir @ Zubair
Title : Disassemblability Design Efficiency (ADE) Analyses for Design for Automatic Assemblies (DfAA)
• Level : Master Engineering (By Course) Session : 2005/2006
Semester : II No. of Students : 1 i. Student : Shayfull Zambree Abd. Rahim
Title : Material Flow Analysia in Two and Three-Plate Moulds for Mould Design Selection
17
• Level : Master Engineering (By Course - Pesisir) Session : 2005/2006
Semester : II No. of Students : 1 i. Student : Wan Abd. Rahman As-Syahid
Wan Ibrahim Title : Design and Development of Thermodynamics
Appratus Using Boothroyd-Dewhurst DFMA Methodology
• Level : Master Engineering (By Course - Pesisir) Session : 2005/2006
Semester : I No. of Students : 1 i. Student : Ahmad Humaizi Hilmi
Title : Design and Analysis of a Paintball Marker Using Boothroyd-Dewhurst DFMA Methodology
• Level : Master Engineering (By Course - Pesisir) Session : 2004/2005
Semester : II No. of Students : 1 i. Student : Mohd Ruzi Haji Harun
Title : Part Combination of Design for Assembly (DFA) Using Effort Flow Analysia (EFA)
• Level : Master Engineering (By Course) Session : 2004/2005
Semester : II No. of Students : 2 i. Student : Nasuha Saude
Title : Development of Computer-Aided Reprocessability Index (CARPI) system for Rotational Parts
ii. Student : Rozie Nani Ahmad Title : Development of Spreadsheet Analysis
Syatem (SAS) for DFA House Methodology
• Level : Master Engineering (By Course) Session : 2002/2003
Semester : II
18
No. of Students : 2 i. Student : Yusri Yusof
Title : Disassemblability Evaluation Method (DEM) for Green Products
ii. Student : Zulkeflee Abdullah
Title : Analysis and Optimization of the Product and Process Design Using DFA House Methodology
• Level : Master Engineering (By Course) Session : 2001/2002
Semester : II No. of Students : 4 i. Student : Lee Kian Hong
Title : The Disassembly Sequences Generation Using The Graph of Connection Precedence Relationship (CPR-Graph)
ii. Student : Amin Shah Omar Title : Environmentally Conscious Design for Car
Air-Conditioning Compressor
iii. Student : Badrul Aisham Md. Zain Title : Penilaian Reka Bentuk untuk Pemasangan (DFA) Hitachi AEM untuk Peralatan Elektrik : Satu Kajian Kes
iv. Student : Md. Razin Jaaffar
Title : Penilaian Reka Bentuk untuk Pemasangan (DFA) Lucas-Hull untuk Peralatan Elektrik : Satu Kajian Kes
• Level : Master Engineering (By Research) Session : 2000/2001
Semester : II No. of Students : 1 i. Student : Muhamad Ikhwan Jambak
Title : Database Development for Supporting Machining of Prismatic Components
6.2.2 Under-Graduate Level
• Level : Bachelor Engineering
19
Session : 2012/2013 Semester : II
No. of Students : 3 i. Student : Muhammad Izzuddin Bin Mohd Jamalludin
Title : Integration of Theory of Inventive Problem Solving(TRIZ) and Hitachi AEM for Product Development
ii. Student : Tsen Fui Bing
Title : Integration of Theory of Inventive Problem Solving and Lucas-Hull DfA Methodology for Product Development
iii. Student : Ummi Habibah Binti Awang Title : Integration of Theory of Inventive Problem Solving and Boothroyd-Dewhurst DfA Methodology for Product Development
• Level : Bachelor Engineering Session : 2008/2009
Semester : II No. of Students : 4 i. Student : Wong Twee Chiang
Title : Development of the Prototype System For Selecting Material and Manufacturing Processes Using Boothroyd-Dewhurst DfM Methodology
ii. Student : Roslinda Idrus
Title : Design for Assembly : A Design Improvement for Assembled Product Using Hitachi Assemblability Evaluation Method (AEM)
iii. Student : Nor Laili Ali
Title : Design for Assembly : A Design Improvement for Assembled Product Using Boothroyd- Dewhurst DfMA Methodology
iv. Student : Noor Taqinah Mohd Khadri
Title : Design for Assembly : A Design Improvement for Assembled Product Using Lucas-Hull DfA Methodology
• Level : Bachelor Engineering Session : 2007/2008
Semester : II
20
No. of Students : 5 i. Student : Mohd Fazly Md Isa
Title : Comparison of DfAA Evaluations on Assembled Product
ii. Student : Mohd Arsyad Haneefa
Title : Computer-Aided Reverse Engineering Approach for Motorcycle Side Mirror
iii. Student : Mohd Azham Abdullah
Title : Design of an Automated Sorting System for Plastic Recyclables
iv. Student : Fairuz Nadia Mustaffa
Title : Determination of Maintainability Index (MI) for Design Performance
v. Student : Mohd Al-Hafiz Jaamatwok
Title : Disassembly Time Evaluation of a Product Using Work Factor Method (WFM)
• Level : Bachelor Engineering Session : 2006/2007
Semester : II No. of Students : 3 i. Student : Hoon Chia Ming
Title : Reverse Fishbone Diagram Approach for Design for Product Retirement
ii. Student : Kong Yuen Tze
Title : Development of the Prototype Analysis System for Design for Automatic Assembly (DFAA)
iii. Student : Ooi Cheng Yang
Title : Product Design Improvements Using Design for Automatic Assembly (DFAA) Methodology
• Level : Bachelor Engineering Session : 2005/2006
Semester : II No. of Students : 4 i. Student : Chong Teik Seng
21
Title : Development of Boothroyd-Dewhurst DFMA System
ii. Student : Benjamin Pinto
Title : Development of Lucas-Hull DFA Methodology
iii. Student : Poornasundaram Pillai a/l Arumugam
Title : Further Improvement of Prototype Handling System for Plastic Injection Molding Machine
iv. Student : Zulkifli Moksin
Title : Mold Cost Estimation
• Level : Bachelor Engineering Session : 2004/2005
Semester : II No. of Students : 2 i. Student : Lee Chung Sin
Title : Development of Spreadsheet Analysis System (SAS) for the DFA House Methodology
ii. Student : Ooi Chuon Yuen
Title : Computer-Aided Reprocessability Index (CARPI) System Development for Rotational and Prismatics Parts
• Level : Bachelor Engineering Session : 2004/2005
Semester : I No. of Students : 1 i. Student : Janice Ngu See Ting
Title : Spreadsheet Analysis System (SAS) for the Disassemblability Evaluation Method (DEM)
• Level : Bachelor Engineering Session : 2003/2004
Semester : II No. of Students : 2 i. Student : Mohd Rohaizal Aziz
Title : Improvement of Prototype Stripping Operation System for Rubber Glove Manufacturing Process
22
ii. Student : Mohd. Ridhuwan Abd. Rahim
Title : Improvement of Prototype Handling System for Plastic Injection Molding Machine
• Level : Bachelor Engineering Session : 2002/2003
Semester : II No. of Students : 8 i. Student : Ahmad Yusri Abdullah
Title : Reka bentuk Konsep dan Terperinci Bagi Mesin Pengupas Ari Kelapa
ii. Student : Wan Ismail Wan Mat Yusof
Title : Analysis and Optimization of the Product and Process Design Using DFA House Methodology
iii. Student : Firdaus Shukri Title : Reka bentuk Untuk Pemasangan (DFA) bagi
Produk Plastik : Kaedah Hitachi AEM iv. Student : Muhamad Ridzuan Sani
Title : Reverse Fishbone Diagram Approach for Design for Product Retirement (DFR)
v. Student : Choong Chung Tong
Title : Axiomatic Design Approach to Product Design for Assembly (DFA)
vi. Student : Teoh Hui Kuun
Title : Development of Design for Assembly (DFA) System for Hitachi Assemblability Evaluation Method (AEM)
vii. Student : Tee Poy Chay
Title : Life Cycle Design (LCD) for Ceramic Products viii. Student : Shahrizaili Salleh
Title : Redesign of a Microcomputer Housing for Quicker Assembly and Disassembly
• Level : Bachelor Engineering Session : 2002/2003
Semester : I No. of Students : 2 i. Student : Rozita Sami'an
23
Title : Further Development of Operation Sequencing for Process Planning System
ii. Student : Suhaimi Abdul Rahman
Title : Reka Bentuk Konsep dan Terperinci Bagi Mesin Pengupas Tempurung Kelapa
• Level : Bachelor Engineering Session : 2001/2002
Semester : II No. of Students : 8 i. Student : Muhamad Fadzly Misbah
Title : Reprocessability Index (RPI) for Environmental Impact Estimation
ii. Student : Teoh Chin Teik
Title : Life Cycle Assessment (LCA) for Assembled Products : A Literature Survey
iii. Student : Mohd. Hanif Abdul Rashid
Title : Further Development of Auto-Packaging in Glove Manufacturing Process
iv. Student : Teh Soo Sen
Title : Fabrication and Testing of a Prototype Handling System for Plastic Injection Moulding Machine
v. Student : Mah Hoong Wai
Title : Further Development of Auto-Stripping Operation System for Glove Manufacturing Process
vi. Student : Ong Lay Eim Title : Development of Stacked Die Ball Grid
Array (SDBGA) Package vii. Student : Ng Kim Choo
Title : Quality Assurance of a Pocket Phones Plastic Components
viii. Student : Moh Wai Kong
Title : Conceptual and Detail Design for Copra Dryer Machine
24
• Level : Bachelor Engineering Session : 2000/2001
Semester : I No. of Students : 7 i. Student : Ismail Mohamed
Title : Pengurusan Sisa Pepejal di Cheras, Wilayah Persekutuan
ii. Student : David Woo Chee Yau
Title : Case Study on Cast Iron Casting
iii. Student : Ahmad Zaidi Md. Zain Title : Reka Bentuk dan Simulasi Robot Gantry
untuk ASRS dalam Sistem CIM
iv. Student : Low Ching Yen Title : Mereka Bentuk Semula Susunatur Bilik
Bersih MMI Sdn. Bhd.
v. Student : Lim Chee Chang Title : Scrap Cost Reduction Through FMEA
Technique
vi. Student : Ng Chee Hen Title : Aplikasi TPM Dalam Meningkatkan
Keberkesanan Mesin
vii. Student : Soo Chen Hsien Title : Defect Analysis and Quality Improvement
• Level : Bachelor Engineering Session : 1999/2000
Semester : November No. of Students : 9 i. Student : Sallee Iskandar Musa
Title : Design and Development of Aluminium Can Crusher
ii. Student : Arief Rahman Halim Title : Reka Bentuk Susunatur Bengkel
Kejuruteraan ATMA
iii. Student : Ramlee Mohammad Title : Penggunaan Kaedah Boothroyd-Dewhurst
Reka Bentuk untuk Pembuatan dan
25
Pemasangan (DFMA)bagi senapang M-16
iv. Student : Sin Jee Boon Title : Reka Bentuk untuk Pengacuanan Suntikan
(DFIM) bagi Produk Plastik
v. Student : Mohd. Mubarak Haji Ahmad Pudelani Title : Mereka Bentuk Sistem Susunatur Kilang
Membuat Barangan Hiasan Berasaskan Batu Marmar
vi. Student : Thiruchelvan a/l Ramasamy
Title : Analisa dan Pembangunan Anggota Palsu
vii. Student : Hooi Win Hun Title : Mereka Bentuk dan Membangunkan Dai
Penimbulan Modular
viii. Student : Chang Chung Leong Title : Mereka Bentuk dan Membangunkan Dai
Ujian Tempaan Sejuk Langsung
ix. Student : Premkumar a/l Suhandiraviran Title : Mismach Defect at Mould
• Level : Bachelor Engineering Session : 1999/2000
Semester : June No. of Students : 13 i. Student : Koh Yong Heng
Title : Representation of Feature-based for Assembly Modelling
ii. Student : Dian Rouzan Jamaluddin
Title : Auto Packaging in Gloves Manufacturing Process
iii. Student : Chia Hon Yen
Title : A Knowledge-based Quality Control System Using SPC Techniques
iv. Student : Tan Poh Lai Title : Computerised Selection Procedure for
Plastic Manufacturing Processes v. Student : Hee Chia Wei
26
Title : The DFA Evaluation Methods of Hitachi, Lucas and Boothroyd-Dewhurst : A Case Study
vi. Student : Lee Nean Tze Title : The DFA Evaluation Methods of Hitachi,
Lucas and Boothroyd-Dewhurst : A Case Study
vii. Student : Loong Siew Cheng Title : The DFA Evaluation Methods of Hitachi,
Lucas and Boothroyd-Dewhurst : A Case Study
viii. Student : Teh Chee Toh Title : Design and Simulation of Handling System of Plastic Injection Moulding
ix. Student : Lor Chee Keong Title : A Knowledge-based Diagnosis System for Wire-EDM
x. Student : Ng Chiew Leng
Title : Design for Injection Molding (DFIM) for Plastic Products
xi. Student : Hairul Anuar Abd. Karim Title : Object-Oriented Product Data Model for
Computer-Integrated Manufacturing xii. Student : Tew Chen Lung
Title : Penggunaan “Failure Mode and Effects Analysis” (FMEA) dalam Kawalan Proses
xiii. Student : Mah Cheow Yang
Title : Perlaksanaan Sistem Barisan Sel Kerja (Workcell) Dalam Produk Elektronik
• Level : Bachelor Engineering Session : 1998/1999
Semester : December No. of Students : 12 i. Student : Azhar Untong
Title : Perlaksanaan Sistem CAD?CAM dalam Industri Seramik
ii. Student : Chow Ji Feng
27
Title : Feature-based Design System Development Using Object-Oriented Methodology
iii. Student : Lin Kean Yee Title : Auto Stripping in Gloves Manufacturing
Process iv. Student : Che'er Keng Kiat Title : Selection of Plastic Material Using an
Object-Oriented Methodology v. Student : Tan Siew Lu
Title : Application of DFMA for Sand Blasting Machine
vi. Student : Mohd. Nizan Abu Bakar Title : The Use of Assembly Evaluation Method in
Design for Assembly
vii. Student : Ng E-Ee Title : The Use of Assembly Evaluation Method in
Design for Assembly
viii. Student : Ahmad Rahmad Ibrahim Title : Penggunaan Proses Prototaip Pantas dalam
Industri di Malaysia : Satu Kajian Kemungkinan
ix. Student : Raja Mahmud Raja Ibrahim
Title : Memperbaiki Aliran Masa Operasi Pemeriksaan Kenderaan PUSPAKOM
x. Student : Heun Foo Heng Title : Case Study on Die Cut Fibre Board Boxes
Making Operation
xi. Student : Ahmad Kamsan Musa Title : Kajian Reka Bentuk 3 Plat Acuan Pancitan
xii. Student : Zammeri Sahar Title : Mereka Bentuk Tatacara Operasi
Pengeluaran Loji Pemecah Batu
• Level : Bachelor Engineering Session : 1998/1999
Semester : June No. of Students : 2
28
i. Student : Puah Yaw Fong
Title : Determination of Feasible Tool Approach Directions for Prismatic Machined Parts
ii. Student : Tay Kay Han
Title : Preliminary Specification and Development of A P.C. Based CAPP Software for Rotational Machined Components
• Level : Bachelor Engineering Session : 1993/1994 No. of Students : 6 i. Student : Wong Sau Hong Title : The Integration of Design and
Manufacturing Functions by Design with Features Approach for Rotational Machined Components
ii. Student : Pang Cheng Hoon Title : A Feature-Based Design for Prismatic
Machined Components iii. Student : Pang Kok Beng Title : A Design with Feature Approach for
Sheet Metal Components iv. Student : Lee Chien Kok Title : A Computer Programme for Selection of
Plastic Manufacturing Processes v. Student : Tan Gay Khoon Title : Development of Computer Programme
for Statistical Process Control vi. Student : Yeoh Hin Seng Title : A Feature Recognition Approach for
Prismatic Machined Components
• Level : Bachelor Engineering Session : 1992/1993 No. of Students : 3
29
i. Student : Tengku Jaafar Tengku Muda Title : A Computer Programme for Process
Planning of Sheet Metal Components ii. Student : Nazaruddin Shafri Title : Kajian Kemungkinan Membangunkan
Sebuah Kilang Berasaskan Gentian Kaca
iii. Student : Azman Hj. Mohd. Daud Title : Pengaturcaraan Berkomputer untuk
Pemilihan Pam
• Level : Bachelor Engineering Session : 1991/1992 No. of Students : 8 i. Student : Lim Chee Beng Title : A Computer Programme for Helical and
Bevel Gear Design ii. Student : Goh Seng Loo Title : Development of an Interactive Process
Planning System for Turned Components with Rotational and Non-Rotational Features
iii. Student : Chai Wai Choon Title : Process Planning Using Expert System
Approach iv. Student : Lim Seong Cheak Title : A Development of the Process Planning
System for Rotational Components
v. Student : Ayob Ahmad Title : Mereka bentuk Satu Sistem Perancangan
Bersaling Tindak bagi Komponen Prisma vi. Student : Soh Lin Lin Title : Expert Process Planning System
vii. Student : Kiranjit Singh Title : Facility Planning for a Rattan-Based
Furniture Factory in Johore viii. Student : Charles Santha Kumar Title : Development of an Expert System for
Trouble Shooting of Plastics Injection
30
Moulding 6.3 Examiners & Evaluators
• Task : Panel of Evaluator Program : Diploma Kejuruteraan Pembuatan & Diploma Kejuruteraan Pengeluaran Division : Pusat Latihan Teknologi Tinggi (ADTEC), Batu Pahat, Johor Organiser : Malaysian Qualifications Agency (MQA)
Date : 18 – 19 July, 2011
• Task : Panel of Evaluator Program : Bachelor on Maintenance Technology, Automotive Technology & HVAC Technology Division : Universiti Teknikal Malaysia Melaka (UTeM), Durian Tunggal, Melaka Organiser : Malaysian Qualifications Agency (MQA)
Date : 25 – 27 June, 2011
• Task : Panel of Evaluator Program : Foundation Studies in Engineering Division : Institut Teknologi Pertama (ITP), Mantin, Negeri Sembilan Organiser : Malaysian Qualifications Agency (MQA)
Date : 5 – 6 May, 2011
• Task : Panel of Evaluator Program : Diploma Kejuruteraan Pembuatan & Diploma Kejuruteraan Pengeluaran Division : Kolej Kemahiran Tinggi MARA (KKTM) Kuantan, Pahang Organiser : Malaysian Qualifications Agency (MQA)
Date : 14 – 16 March, 2011
• Task : Panel of Evaluator Program : Diploma Kejuruteraan Pembuatan & Diploma Kejuruteraan Pengeluaran Division : Pusat Latihan Teknologi Tinggi (ADTEC), Kulim, Kedah Organiser : Malaysian Qualifications Agency (MQA)
Date : 21 – 23 February, 2011
• Task : Panel of Evaluator
31
Program : American Degree Transfer Programme (Science/Engineering) Division : Kolej Universiti Sunway, Petaling Jaya,
Selangor Organiser : Malaysian Qualifications Agency (MQA)
Date : 23 – 24 November, 2008
• Task : Article Reviewer Program : Jurnal Mekanikal
Faculty : Mechanical Engineering (FKM), UTM Title : The DFEL Value Methodology: A Tool for
Design-for-Environment in Automotive Engineering
Date : 11 November, 2008
• Task : Panel of Evaluator Program : American Degree Transfer Programme (Science/Engineering)
Division : Kolej Universiti Nilai, Nilai, Negeri Sembilan
Organiser : Malaysian Qualifications Agency (MQA) Date : 3 – 4 November, 2008
• Task : Article Reviewer and Editor Program : The 2nd International Conference on Science and Technology (ICSTIE 2008) :
Applications in Industry and Education Division : UiTM, Penang Date : 16 July, 2008
• Task : Article Reviewer Program : Jurnal Teknologi
Division : Penerbit UTM Title : The Methodology for Selecting Design
Concepts at Conceptual Design Stage using Analytical Hierarchy Process
Date : 7 May, 2008
• Task : Article Reviewer and Editor Program : National Conference on DECON 2008
Division : UTeM Date : 18 February, 2008
• Task : Article Reviewer Program : Jurnal Teknologi
Division : Penerbit UTM Title : Product Platform Architecture –
32
A Manufacturability and Commonality Analyses
Date : 23 May, 2007
• Task : Article Reviewer Program : Jurnal Teknologi
Division : Penerbit UTM Title : An Expert System for Auto Wire Bond
Machine Date : 7 May, 2007
• Task : Article Reviewer Program : Jurnal Mekanikal
Faculty : Mechanical Engineering (FKM), UTM Title : The Concept of End of Life Vehicles Recovery:
The Description of the Porcess, Impact from Developed Countries and Direction of Research
Date : 14 September, 2006
• Task : Article Reviewer Program : Jurnal Teknologi
Division : Penerbit UTM Title : Development of Maintainability Index
Template Date : 22 May, 2006
• Task : Article Reviewer and Editor Program : National Conference on DECON 2006
Division : KUTKM Title : Design of Safety System for Industrial Robots
Work Cells Date : 28 April, 2006
• Task : Article Reviewer and Editor Program : National Conference on DECON 2006
Division : KUTKM Title : Thermal Errors Affecting Engineering
Measurement Date : 28 April, 2006
• Task : Article Reviewer and Editor Program : National Conference on DECON 2006
Division : KUTKM Title : Mechanical Design of An Experimental Rig for
Measurement of Secondary Yielding Date : 28 April, 2006
33
• Task : Article Reviewer and Editor Program : National Conference on DECON 2006
Division : KUTKM Title : Analysis of Plastic Flow Inside the Family
Mould Date : 28 April, 2006
• Task : Article Reviewer and Editor Program : National Conference on DECON 2006
Division : KUTKM Title : Product Design for Mass Customization and
Postposement Date : 28 April, 2006
• Task : Article Reviewer Program : Conference on Manufacturing & Electronic
Technology (COMET 2006) Division : Penerbit UTM
Title : Computer Aided Garment 2D to 3D Date : 13 December, 2005
• Task : External Examiner (Viva) Student : Rahmatullah Program : Master in Science Faculty : Universiti Sains Malaysia (USM)
Thesis's Title : Development of an Approach to Enhance Design for Assembly (DFA)
Date : 23 October, 2003
• Task : Evaluator (Visit) Program : American Degree Transfer Programme (Science/Engineering) Division : Kolej Sunway, Petaling Jaya, Selangor Organiser : National Board of Accreditation (LAN)
Date : 13 & 14 October, 2003
• Task : Chairman of Oral Examination Student : Ayu Bidiawati J.R. Program : Sarjana Kej. (Mechanical) Faculty : Mechanical Engineering
Date : 1 October, 2003
• Task : Article Reviewer Program : Jurnal Mekanikal
Division : Mechanical Engineering (FKM), UTM Title : Development of Sorting System in the Plywood Grading Line
34
Date : 23 July, 2003
• Task : Article Reviewer Program : Jurnal Teknologi
Division : Penerbit UTM Title : State-of-the Art Survey on Modular Product Architecture
Date : 18 June, 2003
• Task : Evaluator Program : American Degree Transfer Programme (Science/Engineering) Division : Kolej Sunway, Petaling Jaya, Selangor Organiser : National Board of Accreditation (LAN)
Date : 16 June, 2003
• Task : Article Reviewer Program : Jurnal Teknologi
Division : Penerbit UTM Title : Pendekatan Ke Arah Meningkatkan
Perkongsian Komponen Berdasarkan Kaedah Modular
Date : 11 June, 2003
• Task : External Examiner Student : Rahmatullah Program : Master in Science Faculty : Universiti Sains Malaysia (USM)
Thesis's Title : Development of an Approach to Enhance Design for Assembly (DFA)
Date : 22 May, 2003
• Task : Evaluator Program : Diploma of Mechanical Engineering Division : Institut Teknologi KENWA, Sandakan Organiser : National Board of Accreditation (LAN)
Date : 12 May, 2003
• Task : Technical Evaluator Program : IGS Scheme Grant Company : Juru Alam Sdn. Bhd. Organiser : MOSTE
Date : 9 March, 2003
• Task : Chairman of Oral Examination Student : Tan Poh Lai Program : Sarjana Kej. Mechanical
35
Faculty : Mechanical Engineering Thesis’s Title : Analysis of Tool Life and Surface Roughness
During Hard Turning of AISI H13 Hot Work Tool Steel Using Mixed Ceramics
Date : 7 March, 2003
• Task : Article Reviewer Program : Jurnal Teknologi
Division : Penerbit UTM Title : A Comparative Study of Qualitative and
Quantitative Module Identification Method Date : 27 January, 2003
• Task : Technical Evaluator Program : IGS Scheme Grant Company : Juru Alam Sdn. Bhd. Organiser : MOSTE
Date : 15 January, 2003
• Task : Technical Evaluator Program : IGS Scheme Grant Company : Juru Alam Sdn. Bhd. Organiser : MOSTE
Date : 20 December, 2002
• Task : Evaluator for Presentation Student : Risal Abu Program : Master in Mechanical Engineering Faculty : Mechanical Engineering (FKM), UTM
Thesis's Title : Automation of Process Sequencing for Pocket Machining Using GRIP
Date : 25 September, 2002
• Task : Evaluator (Re-Evaluation) Program : Diploma of Mechanical Engineering Division : Institut Teknologi KENWA, Sandakan Organiser : National Board of Accreditation (LAN)
Date : 22 September, 2002
• Task : Internal Examiner Student : Rozlina Md. Sirat Program : Master in Mechanical Engineering Faculty : Mechanical Engineering (FKM), UTM
Thesis's Title : The Implementation of Design for Assembly (DFA) in Small and Medium- Sized Industries (SMIs) in Malaysia
Date : 30 July, 2002
36
• Task : Article Reviewer Program : Jurnal Mekanikal
Faculty : Mechanical Engineering (FKM), UTM Title : Efficient Refernce Pulse CNC Interpolator
for 2D Parametric Curve Date : 30 May, 2002
• Task : Chairman & Evaluator Program : Diploma of Mechanical Engineering Division : Sepang Institute of Technology, Klang Organiser : National Board of Accreditation (LAN)
Date : 22 - 23 April, 2002
• Task : External Examiner Student : Mosaddeque Mahmud Rizwan Program : Master in Science Faculty : Universiti Sains Malaysia (USM)
Thesis's Title : Integrated Approach for Improving Product Design
Date : 18 February, 2002
• Task : Evaluator Program : Sarjana-Muda Pendidikan Kejuruteraan
Mekanik Division : Universiti Terbuka Malaysia (UNITEM)
Organiser : National Board of Accreditation (LAN) Date : 5 December, 2001
• Task : Technical Evaluator Program : IGS Scheme Grant Company : Standard Equipment Sdn. Bhd. Organiser : MOSTE
Date : 23 August, 2001
• Task : Technical Evaluator Program : IGS Scheme Grant Company : Standard Equipment Sdn. Bhd. Organiser : MOSTE
Date : 24 July, 2001
• Task : Article Reviewer Program : Jurnal Mekanikal
Faculty : Mechanical Engineering (FKM), UTM Title : IJETSS: A Prototype Expert System for
Fault Diagnosis on Aircraft Engine Date : 17 July, 2001
37
• Task : Evaluator Program : Diploma of Mechanical Engineering Division : PRIME College, Subang Organiser : National Board of Accreditation (LAN)
Date : 4 July, 2001
• Task : Technical Evaluator Program : IGS Scheme Grant Company : Standard Equipment Sdn. Bhd. Organiser : MOSTE
Date : 14 June, 2001
• Task : Evaluator Program : Bengkel Penyemakan Permohonan
Proposal IRPA RM-8 Faculty : Mechanical Engineering (FKM), UTM Organiser : Universiti Teknologi Malaysia
Date : 12 June, 2001
• Task : Evaluator Program : Diploma of Mechanical Engineering Division : Institut Teknologi KENWA, Sandakan Organiser : National Board of Accreditation (LAN)
Date : 14 May, 2001
• Task : Article Reviewer Program : Jurnal Teknologi
Division : Penerbit, UTM Title : AutoID Technologies in Tool Management
Systems Date : 14 April, 2000
• Task : Evaluator for Presentation Student : Rozlina Md. Sirat Program : Master in Mechanical Engineering Faculty : Mechanical Engineering (FKM), UTM
Thesis's Title : The Implementation of Design for Assembly (DFA) in Small and Medium- Sized Industries (SMIs) in Malaysia
Date : 5 March, 2001
• Task : Article Reviewer Program : Jurnal Teknologi
Division : Penerbit, UTM Title : Productivity Improvement with
Application of Computer-Aided
38
Engineering in a Printed Circuit Board Assembly (PCBA) Manufacturing Plant - Case Study
Date : 9 March , 2000
• Task : Internal Examiner Student : Napsiah Bte Ismail Program : Doctor of Philosophy Faculty : Mechanical Engineering (FKM), UTM Thesis's Title : Edge Boundary Classification Technique
for Feature Recognition Date : June, 1998
• Task : Chairman of Oral Examination Student : Kalim Ullah Program : Sarjana Kej. Mechanical Faculty : Mechanical Engineering (FKM), UTM Thesis’s Title : Investigating on Ballising as a Precision Manufacturing Process Date : 17 February, 1998
• Task : Evaluator Subject : Encyclopaedia of Science & Technology Entry Word : Pemesinan Alur Elektron Classification : Process Category : 3 Date : 8 March, 1996
• Task : Evaluator Subject : Encyclopaedia of Science & Technology Entry Word : Pemesinan ECG Classification : Process Category : 3 Date : 23 March, 1996
• Task : Evaluator Subject : Encyclopaedia of Science & Technology Entry Word : Pemesinan ECM Classification : Process Category : 3 Date : 23 March, 1996 7.0 Publications
7.1. Journals
• Level : National
39
Author : Ariffin Abdul Razak Title : An Object-Oriented Feature- Based Design System. Part I : Face-Based Detection of Feature
Interactions Place : Jurnal Teknologi, UTM Date : June, 1999
• Level : National Author : Ariffin Abdul Razak
Title : An Object-Oriented Feature- Based Design System. Part II : Tool Approach Directions using Ray Firing Technique
Place : Jurnal Teknologi, UTM Date : December, 1999
• Level : National Author : Ariffin Abdul Razak
Title : An Object-Oriented Feature- Based Design System. Part III : Tool Approach Directions using Volume Sweeping Technique
Place : Jurnal Teknologi, UTM Date : December, 1999
• Level : National Author : Ariffin Abdul Razak
Title : The Integration of Design and Manufacturing Using a Design- with-Feature Approach for Turned Components
Place : Jurnal Teknologi, UTM Date : June, 1992
7.2 Working Papers
• Level : International Author(s) : Wiwiek Fatmawati &
Ariffin Abdul Razak
Title : Analysis of Product Disassemblability
Using the Disassembly Evaluation
Chart Methodology Name of Conference : International Graduate Conference
on Engineering and Sciences Place : UTM, Skudai, Johor
40
Date : 23 – 24 Disember 2008
• Level : National Author(s) : Ariffin A. R., Rozaimi M.S. &
Ooi C.Y. Title : Feature-Based Design Approach for Reprocessability Index (RPI)
Evaluation Name of Conference : National Conference on Design and Concurrent Engineering 2006 (DECON 2006)
Place : Century Mahkota Hotel, Malacca Date : 9 – 10 August, 2006
• Level : National Author(s) : Ariffin A. R. & Zulkeflee A. Title : Analysis and Improvement of the
Product and Process Design using DFA House Methodology
Name of Conference : National Conference on Design and Concurrent Engineering 2006 (DECON 2006)
Place : Century Mahkota Hotel, Malacca Date : 9 – 10 August, 2006
• Level : National Author(s) : Chong T.S. & Ariffin A. R. Title : Development of The Prototype System
for Design for Assembly (DfA) Using Boothroyd-Dewhurst DFA Method
Name of Conference : Conference on Manufacturing and Electronic Technology (COMET-2006)
Place : UTM Skudai, Johor Date : 14 – 15 January, 2006
• Level : National Author(s) : Ariffin A. R. & Ooi C.Y. Title : Computer-Aided Reprocessability Index (CARPI) System for Rotational and Prismatic Parts Name of Conference : National Seminar on Industrial Computing (iComp_2005)
Place : Putrajaya Date : 24 September, 2005
• Level : National Author(s) : Ariffin A. R. & Lee C. S.
41
Title : Spreadsheet Analysis System (SAS) for the DFA House Methodology Name of Conference : National Seminar on Industrial Computing (iComp_2005)
Place : Putrajaya Date : 24 September, 2005
• Level : International Author(s) : A.A. Razak Title : Detection of Feature Interactions Based on the Reduction of a Feature's "Real" Face Area Name of Conference : UMTIK 2000
Place : Ankara, Turkey Date : 13 - 15 September, 2000
• Level : International Author(s) : Ariffin A.R. & T.P. Lai Title : An Object-Oriented Selection of Plastic Manufacturing Processes Name of Conference : ICAMT 2000
Place : Johor Bahru, Johor Date : 16 - 17 August, 2000
• Level : International Author(s) : Ariffin A.R., M.S. Rozaimi &
C.T. Teh Title : Handling System for Plastic Injection Molding Machine Name of Conference : ICAMT 2000
Place : Johor Bahru, Johor Date : 16 - 17 August, 2000
• Level : International Author(s) : M.I. Jambak, A.M. Shaharoun &
A.A. Razak Title : Design and Development of Architecture-based Information System for an Automated Manufacturing System Name of Conference : ICCIM 2000
Place : Singapore Date : 28 - 30 March, 2000
• Level : National Author(s) : A.A. Razak & C.L. Ng Title : Design for Injection Molding for Plastic Product : A Case Study
42
Name of Conference : National Seminar of “Design of the Millenium”
Place : Sofitel Hotel, Johor Bahru Date : 15 January, 2000
• Level : International Author(s) : Venkatesh, V.C., Awaluddin, M.S. & Ariffin A.R. Title : The Tool Life, Mechanics and Economics in Conventional and Ultra Precision Machining Name of Conference : ASME International Mechanical Engineering Congress and Exposition
Place : USA Date : November, 1999
• Level : International Author(s) : A.M. Shaharoun, A.A. Razak &
M.I. Jambak Title : Database Development for Supporting Machining of Prismatic Components Name of Conference : World Engineering Congress `99
Place : UPM, Serdang, Selangor Date : 19 - 22 July, 1999
• Level : National Author(s) : A.M. Shaharoun, A.A. Razak &
M.I. Jambak Title : A PC-Based Information System for a
Flexible Manufacturing System Name of Conference : Malaysian Science & Technology Congress `98
Place : USM, Penang Date : 10 - 11 November, 1998
• Level : National Author : Ariffin Abdul Razak
Title : Face-Based Detection of Feature Interactions in An Object-Oriented Feature-Based Design System Name of Conference : Malaysian Science & Technology Congress `98
Place : Johor Bahru, Johor Date : 30 - 31 October, 1998
• Level : National
43
Author(s) : Ariffin Abdul Razak Title : Volume Sweeping Technique for Determination of Feasible Tool Approach Directions Name of Conference : Malaysian Science & Technology Congress `98 Place : Johor Bahru, Johor
Date : 30 - 31 October, 1998
• Level : International Author(s) : Ariffin Abdul Razak, Mohd.
Nasir Tamin & Lim Chee Beng Title : Computerized Selection Procedure for External Spur, Helical and Bevel Gears Name of Conference : INCARF - 93 Place : New Delhi, India
Date : 16 - 19 December, 1993
• Level : International Author(s) : Ariffin Abdul Razak, Mohd.
Nasir Tamin & Lim Chee Beng Title : A Software for Selection Procedure of External Spur, Helical and Bevel Gears Name of Conference : International Conference on
Engineering Software (ICES `93) Place : Staffordshire University,
United Kingdom Date : 15 September, 1993
• Level : International Author(s) : Ariffin Abdul Razak, S. Rajes- ham & C. Shanthakumar
Title : Computer Aided Trouble Shooting for Plastics Injection Moulding
Name of Conference : 3rd. Asia Pasific Plastics and Rubber Conference
Place : Singapore Date : 18 June, 1993
• Level : International Author(s) : Ariffin Abdul Razak, Mohd.
Nasir Tamin, Lim Chee Beng & Seow Hock Thiam
Title : A Computer Program for External Spur Gear Design
44
Name of Conference : International Conference on Computational Methods in Engineering
Place : Singapore Date : 11 November, 1992
• Level : International Author(s) : Ariffin Abdul Razak, Mohd.
Nasir Tamin & Lim Chee Beng Title : A Computer Program for Helical and Bevel Gears Design Name of Conference : 2nd. International Conference of
Die and Mould Technology Place : Singapore
Date : 24 September, 1992
• Level : International Author(s) : Ariffin Abdul Razak
Title : A Design-with-Feature Approach for Rotational Machined Components Name of Conference : 1st. International Conference on
Manufacturing Technology Place : Hong Kong Date : 28 December, 1991
• Level : National Author : Ariffin Abdul Razak
Title : Pendekatan mereka bentuk dengan Sifat bagi Komponen yang Dimesin Secara Putaran
Name of Conference : Malaysian Science & Technology Congress `91
Place : SIRIM, Shah Alam Date : 15 August, 1991
7.3 Technical & Evaluation Reports
• Title : Post-Visit Evaluation Report on "Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Universiti Sunway, Petaling Jaya, Selangor
Submitted to : Malaysian Qualifications Agency (MQA)
Date : 27 November, 2008
• Title : Post-Visit Evaluation Report on
45
"Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Universiti Nilai, Nilai, Negeri Sembilan
Submitted to : Malaysian Qualifications Agency (MQA)
Date : 11 November, 2008
• Title : Pre-Visit Evaluation Report on "Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Universiti Nilai, Nilai, Negeri Sembilan
Submitted to : Malaysian Qualifications Agency (MQA)
Date : 22 Ogos, 2008
• Title : Pre-Visit Evaluation Report on "Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Universiti Sunway, Petaling Jaya, Selangor
Submitted to : Malaysian Qualifications Agency (MQA)
Date : 15 Ogos, 2008
• Title : Post-Visit Evaluation Report on "Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Sunway, Petaling Jaya, Selangor
Submitted to : National Board of Accreditation (LAN)
Date : 3 November, 2003
• Title : Re-Evaluation Report on "Permohonan Kelulusan Pengendalian Kursus Diploma Kejuruteraan Mekanikal", Institut Teknologi Kenwa, Sandakan, Sabah
Submitted to : National Board of Accreditation (LAN)
Date : 7 October, 2003
46
• Title : Evaluation Report on Master’s Thesis "Development of a Method to Enhance Design for Assembly (DfA)", by Rahmatullah
Submitted to : Institut Pengajian Siswazah, USM, Penang
Date : 22 August, 2003
• Title : Pre-Visit Evaluation Report on "Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Sunway, Petaling Jaya, Selangor
Submitted to : National Board of Accreditation (LAN)
Date : 1 July, 2003
• Title : Post-Visit Evaluation Report on "Permohonan Kelulusan Pengendalian Kursus Diploma Kejuruteraan Mekanikal", Institut Teknologi Kenwa, Sandakan, Sabah
Submitted to : National Board of Accreditation (LAN)
Date : 6 June, 2003
• Title : Pre-Visit Evaluation Report on "Permohonan Kelulusan Pengendalian Kursus Diploma Kejuruteraan Mekanikal", Institut Teknologi Kenwa, Sandakan, Sabah
Submitted to : National Board of Accreditation (LAN)
Date : 26 May, 2003
• Title : Evaluation Report on Master’s Thesis "The Implementation of Design for Assembly (DFA) in Small and Medium Sized Industries (SMIs) in Malaysia", by Rozlina Mat Sirat
Submitted to : Sekolah Pengajian Siswazah, UTM, Skudai, Johor
Date : 28 July, 2002
• Title : Evaluation Report on Master’s Thesis "Integrated Approach for Improving
47
Product Design", by Mosaddeque Mahmud Rizwan
Submitted to : Institut Pengajian Siswazah, USM, Penang
Date : 5 April, 2002
• Title : Evaluation Report on "Permohonan Standard Minimum Diploma Kejuruteraan Mekanikal", SIT, Klang, Selangor
Submitted to : National Board of Accreditation (LAN)
Date : 2 March, 2002
• Title : Evaluation Report on "Permohonan Kelulusan Pengendalian Kursus Sarjana Muda Pendidikan Kejuruteraan Mekanik", Universiti Terbuka Malaysia (UNITEM), Kuala Lumpur
Submitted to : National Board of Accreditation (LAN)
Date : 7 January, 2002
• Title : Evaluation Report on "Permohonan Standard Minimum Diploma Kejuruteraan Mekanikal", PRIME College, Subang, Selangor
Submitted to : National Board of Accreditation (LAN)
Date : 7 August, 2001
• Title : Evaluation Report on "Permohonan Kelulusan Pengendalian Kursus Diploma Kejuruteraan Mekanikal", Institut Teknologi KENWA, Sandakan Sabah
Submitted to : National Board of Accreditation (LAN)
Date : 13 June, 2001
• Title : Third Report on "Study on Application of Hitachi Assembla- bility Evaluation Method (AEM)"
Submitted to : Hitachi Scholarship Foundation (HSF), Tokyo, Japan
Date : 6 February, 2001
48
• Title : Second Report on "Study on Application of Hitachi Assembla- bility Evaluation Method (AEM)"
Submitted to : Hitachi Scholarship Foundation (HSF), Tokyo, Japan
Date : 6 December, 2000
• Title : First Report on "Study on Application of Hitachi Assembla- bility Evaluation Method (AEM)"
Submitted to : Hitachi Scholarship Foundation (HSF), Tokyo, Japan
Date : 5 October, 2000
• Title : Evaluation Report on Doctoral Thesis "Edge Boundary Classification Technique for Feature Recognition", by Napsiah Ismail
Submitted to : Sekolah Pengajian Siswazah, UTM, Skudai, Johor
Date : May, 1998
7.4 Encyclopaedia
• Subject : Encyclopaedia of Science & Technology Entry Word : Kimpalan Rintangan Classification : Process Category : 1 Date : March, 1996
• Subject : Encyclopaedia of Science & Technology Entry Word : Pateri Classification : Process Category : 2 Date : February, 1996
• Subject : Encyclopaedia of Science & Technology Entry Word : Pencanaian Classification : Process Category : 1 Date : March, 1996
• Subject : Encyclopaedia of Science & Technology Entry Word : Penggerudian Logam Classification : Process
49
Category : 1 Date : March, 1996
• Subject : Encyclopaedia of Science & Technology Entry Word : Penuangan Acuan Kekal Classification : Process Category : 2 Date : February, 1996
• Subject : Encyclopaedia of Science & Technology Entry Word : Pengosongan dan Penebukan Classification : Process Category : 2 Date : February, 1996
• Subject : Encyclopaedia of Science & Technology Entry Word : Pembagasan Pasir Classification : Process Category : 3 Date : April, 1996
• Subject : Encyclopaedia of Science & Technology Entry Word : Pemesinan PBM Classification : Process Category : 3 Date : April, 1996
• Subject : Encyclopaedia of Science & Technology Entry Word : Pemesinan CHM Classification : Process Category : 3 Date : April, 1996
7.5 Others (Working Papers)
• Working paper on establishment of Resource Centre at Rumah Barkat, Pertubuhan Kebajikan Anak-Anak Yatim Negeri Johor, Johor Bahru, 1988.
• Working paper on establishment of Pasukan Pertahanan Awam, Universiti Teknologi Malaysia Branch, 1992.
50
8.0 RESEARCH AND CONSULTANCY
• Co-Investigator for IRPA Project Vote No. 72091, “Development of a Prototype Computer-Integrated Manufacturing System (CIMS) at UTM” from 1996 to 1999 - RM500,000/-.
• Co-Investigator for Intel Technology Sdn. Bhd. Project Vote No. 68837, "Milling of Copper Heat Sink and Silicon Die to Get Mirror Finish" RM132,000/- for 2 years from July 1999 to June 2001.
• Principal Investigator for Research Management Centre (RMC) Short-Term Research Project Vote no. 71549 on "Auto-Stripping Operation in Gloves Manufacturing Process", RM9,000/- from November 1999 to November 2001.
• Principal Investigator for Research Management Centre (RMC) Short-Term Research Project Vote No. 71589 on "Auto-Packaging Operation in Gloves Manufacturing Process", RM19,000/- from December 1999 to December 2000.
• Co-Investigator for Research Management Centre (RMC) Short-Term Research Project Vote no. 71601 on "Design and Development of Finished Product Handling System of Plastic Injection Molding Machine", RM16,000/- from June 2000 to November 2001.
• Co-Investigator for IRPA Project Vote No. 72072, "New HVAC Equipment", Aspect on Manufacturing, 1999 – 2001.
• Commercialization and Prototype Development of a PET Reheat Stretch Blow Mould Machine, Ching Yee Mould Industries Sdn. Bhd., March 1999.
9.0 CO-CURRICULUM 9.1 Non-Governmental Organisations
• Member, Pertubuhan Kebajikan Anak-Anak Yatim Negeri Johor, 1991 until now.
51
• Member, Koperasi Permodalan Melayu Negeri Johor (KPMNJ) since 1996 until now.
• Secretary of Committee, Bimbingan Akademik dan Perpustakaan, Pertubuhan Kebajikan Anak-Anak Yatim Negeri Johor, 1993/94.
• Life Member, PEMADAM Kebangsaan, No. Ahli : 9348, 1991 until now.
• Member of Committee, Pasukan Sukarelawan PEMADAM Negeri Johor, 1992/94.
• Member, Pasukan Pertahanan Awam, Cawangan Johor Bahru, Negeri Johor, 1992 until now.
• Pemeriksa Kira-Kira, Pertubuhan Kebajikan Anak-Anak Yatim Negeri Johor, 1993/94.
• Member, Pasukan Kadet PEMADAM Negeri Johor, 1993.
• Member, Persatuan Pengguna Negeri Johor (JCA), Johor Bahru Branch, 1992.
• Member, Koperasi Universiti Teknologi Malaysia, 1987 to 1992. 10.0 COURSES ATTENDED
• MyTRIZ Conference & Workshops 2012, 6 – 9 November 2012, Organised by MyTRIZ Association & Intel Co. Ltd, Penang.
• Workshop on “Assessor Training for Programme Accreditation”, 27 – 29 July, 2009, Organised by Malaysian Qualification Accreditation (MQA), Kuala Lumpur.
• Bengkel Pemurniaan bagi KKTM Balik Pulau, Pulau Pinang, 13 – 15 October 2008, Organised by MARA and German Malaysian Institute (GMI), Kolej Kemahiran Tinggi MARA (KKTM), Balik Pulau, Penang.
• National Conference on “Design and Concurrent Engineering 2006 (DECON 2006)”, 9 – 10 August 2006, Organised by Fakulti Kejuruteraan Pembuatan, Kolej Universiti Teknikal Kebangsaan Malaysia (KUTKM), Malacca.
• Workshop on “Teaching and Learning Colloquium Regional”, 13 May 2006, Organised by Open University of Malaysia (OUM), PPW Johor.
52
• Workshop on “Penasihat Kurikulum bagi Diploma Teknologi Pembuatan Acuan”, 15 – 18 February 2006, Organised by Bahagian Pendidikan & Latihan (Kemahiran) MARA, Petaling Jaya, Selangor.
• Course on “Penerapan Kemahiran Generik di Kalangan Pelajar UTM Tahap II”, 6 – 7 December 2005, Organised by Center of Teaching and Learning (CTL), UNIPEN, UTM Skudai, Johor
• National Seminar on “Komputeran Industri”, 24 September 2005, Organised by Fakulti Teknologi dan Sains Maklumat, UKM, Bangi, Selangor.
• Workshop on “Penasihat Kurikulum bagi Diploma Teknologi Pembuatan Acuan”, 13 – 15 September 2005, Organised by Bahagian Pendidikan & Latihan (Kemahiran) MARA, Petaling Jaya, Selangor.
• Workshop on “Pengajaran Berasaskan Hasil”, 13 July 2005, Organised by FKM, UTM Skudai, Johor.
• Course on “Pengajaran Menggunakan Teknologi”, 21 – 22 June 2005, Organised by Center of Teaching and Learning (CTL), UNIPEN, UTM Skudai, Johor.
• Workshop on “Perancangan Strategik dan Kurikulum Program Sarjana Teknologi Pembuatan Termaju dan Kursus Baru Sarjana Kejuruteraan Industri”, 6 – 8 June 2005, Organised by Jabatan Kejuruteraan Pembuatan dan Industri, FKM, UTM, Century Mahkota Hotel Melaka.
• Teaching and Learning Roadshow, 11 December 2004, UTM Skudai Johor.
• Course on “Penilaian Tahap Kecekapan Skim Pendidikan DS45/TK4”, 19 October – 2 November 2004, Organised by UNIPEN, UTM Skudai, Johor.
• Workshop on “Kurikulum dan Kemahiran Asas”, 12 August 2004, Organised by FKM UTM, Fakulti Kejuruteraan Mekanikal, UTM Skudai.
• Workshop on “Sistem Penasihatan Akademik”, 17 – 18 May 2004, Organised by FKM UTM, Fakulti Kejuruteraan Mekanikal, UTM Skudai.
• Workshop on “Tutor Traning”, 14 - 15 December 2003, Organised by Open University of Malaysia (OUM), PPW Johor.
• Workshop on "7 Habits of Highly Effective People", 15 – 18 June 2003, Organised by UTM, Desaru Perdana Resort, Kota Tinggi, Johor.
53
• Workshop on "Penyelidikan : Ke arah Universiti Bertaraf Antara bangsa", 21 – 22 August 2002, Organised by UTM, Hyatt Regency Hotel, Johor Bahru, Johor.
• Course on "Pengurusan Stress", 16 – 17 April 2002, Organised UTM and Budiman Research Consultant, Hyatt Regency Hotel, Johor Bahru, Johor.
• Course on "Komunikasi & Kemahiran Interpersonal", 15 - 16 January 2002, Organised by UTM and Noridah Consultant, Grand Bluewave Hotel, Johor Bahru, Johor.
• Course on "E-Learning", 31 October - 1 November 2001, UTM Skudai, Johor.
• "Kursus Pemahaman Islam", 8 & 9 November 2001, Organised by Badan Kebajikan Islam MOTOROLA, BTN Bumi Jati Camp, Selangor.
• Short Course on "Programmable Logic Controller (PLC)", 20 August 2001, FESTO (Johor Branch), Johor Bahru.
• Long-Term Training Programme "Hitachi Fellowship for Research in Japan", 7 August 2000 - 6 February 2001 at University of Tokyo, Japan.
• Short Course on "Low Cost Flip Chip Processing and Analysis with Hands-on Applications", 19 & 20 January 2000, Georgia Institute of Technology, Atlanta, USA.
• "Bengkel Penilaian Kelulusan, Tahap Minimum dan Perakuan Akreditasi Bil 7/2000", 31 May 2000, Dewan Al-Ghazali, Masjid Sultan Ismail, UTM, Skudai, Johor.
• Course on "Computer-Integrated Manufacturing System (CIMS)", 22 - 26 November 1999, Production Laboratory, FKM, UTM, Skudai, Johor.
• "Konvensyen Pendidikan UTM 1999", 10 November 1999, Kompleks Dewan Kuliah Blok N24, UTM, Skudai, Johor.
• Workshop on "Pengurusan Penilaian Prestasi Staf UTM", 13 & 14 October 1999, Dewan Jamuan, Bangunan Pentadbiran UTM, Skudai, Johor.
• Workshop on "Induksi Pengajaran Program Khas Pensiswazahan Guru (PKPG)", 6 - 8 September 1999, Hotel Rasa Sayang, Johor Bahru, Johor.
• Course on "Effective Supervision and Thesis Examination", 9 - 10 June 1999, UTM, Skudai, Johor.
54
11.0 ACADEMIC & SERVICE AWARDS
• Hitachi Fellowship Award by Hitachi Scholarship Foundation (HSF), Japan, August, 2000 - February, 2001.
• Excellency Service Awards by UTM, 1999.
• Academic Award for Doctor of Philosophy (Ph.D) by UTM/JPA, 1993 -1997.
• Academic Award for Master in Philosophy (M.Phil) by UTM/JPA, 1989 - 1991.
12.0 OTHER CONTRIBUTIONS
• Task : Advisor of Education Program : Bakti Siswa Kertih `99 Division : Kolej Tun Hussein Onn Date : 27 May - 3 June, 1999
• Task : Co-ordinator Program : CIM Presentation by Principal of Amatrol Pte. Ltd Division : Faculty of Mechanical Date : 7 January, 1999
• Task : Member of Organising Committee (Departmental Level)
Program : Galeri UTM `98 Division : Faculty of Mechanical Date : 1 - 28 December, 1998
• Task : Co-ordinator Program : Presentation on "Machining" by Prof. Y. Kakino Division : Faculty of Mechanical Date : 10 December, 1998
• Task : Advisor Program : Academic Camping Course
Participant : Student Year 1KS Division : Kolej Tun Hussien Onn Date : 28 - 29 November, 1998
• Task : Advisor Program : Academic Camping Course
Participant : Student Year 1SMP Division : Faculty of Mechanical
55
Date : 15 - 16 August, 1998
• Task : Fellow Division : Kolej Tun Hussien Onn Date : 1 May, 1998 - 30 June, 1999
• Task : Member of Committee Division : Seminar/Colloqium Committee Faculty of Mechanical Engineering
Date : 14 February, 1998 - 13 February, 2000
• Task : Fellow Division : Resak Students Village Date : 1 June, 1992 - 25 December, 1993
• Task : Director of Food and Drink Supply Program : Students Orientation Week Division : Resak Students Village
Date : 26 June – 2 July, 1993
• Task : Facilitator Program : Seminar dan Pameran Kesedaran Penyalahgunaan
Dadah Date : 30 July, 1993
• Task : Member of Committee (Production Panel) Division : Committee of Projek Sarjana Muda (PSM), Faculty
of Mechanical Engineering Date : 1992 - 1993
• Task : Member of Organising Committee (Accommodation)
Program : 2nd. National Seminar on Electron Microscope, Faculty of Mechanical Engineering
Date : 1992
• Task : Chairman (Faculty of Mechanical Engineering) Program : Hari Keluarga UTM Date : 1992
• Task : Member of Organising Committee (Refreshment) Program : Hari Keluarga Pejabat Hal-Ehwal Pelajar Date : 1992
• Task : Secretary Program : Committee of Penerapan Nilai-Nilai Islam (JAPNI),
Faculty of Mechanical Engineering
56
Date : 1992
• Task : Assessor Program : Mengarang Esei dan Cerpen Division : Meranti Students Village
Date : 19 Jan – 20 Feb, 1992
• Task : Member of Committee Division : Penerbitan Akademik Universiti
Date : 1991 - 1993
• Task : Chairman Division : Penerbitan Akademik Fakulti
Date : 1991 - 1993
• Task : Fellow Division : Meranti Students Village From : 1 June, 1991 - 31 May, 1992
• Task : Chairman of Accommodation and Food Committee
Program : Muzakarah Faculty of Mechanical Engineering Date : 1991
• Task : Member of Committee for Seminar Equipments Program : Minggu Sains & Teknologi, Faculty of Mechanical Engineering Date : 1991
• Task : Member of Panel Program : Fellow Camping Program
Date : 29 June, 1989
• Task : Fellow Division : Resak Students Village Date : 1 June, 1988 - 31 August, 1989
• Task : Member of Committee Program : Committee of Penerapan Nilai-Nilai Islam (JAPNI),
Faculty of Mechanical Engineering Date : 1987-1989
• Task : Fellow Division : Kolej Kedua, Taman Sri Keramat, Kuala Lumpur
Date : 1 April, 1988 - 31 May, 1988
• Task : Director of Reception
57
Program : Kursus Kepimpinan Pensyarah, Faculty Kejuru-teraan Jentera
Date : 1988
• Task : Member of Organising Committee Program : Kursus Bina Semangat, Faculty of Mechanical
Engineering Date : 1988
• Task : Fellow Division : Kolej Ketiga, Ulu Kelang, Kuala Lumpur Date : 1 July, 1987 - 31 March, 1988
• Task : Member of Organising Committee Program : Seminar Penggunaan CAD/CAM dalam Keju-
ruteraan Jentera Date : 1987
• Task : Fellow Division : Asrama Kolej Pertama Date : 1 March, 1987 - 31 June, 1987
• Task : Member of Organising Committee Program : Seminar Penggunaan CAD/CAM dalam Industri
Pembuatan Date : 1987
• Task : Member of Organising Committee Program : Jawatan Kuasa Penyediaan Kertas Kerja untuk
Kursus Diploma Teknologi Pembuatan, Faculty of Mechanical Engineering
Date : 1987
top related