remote equipment list
Post on 08-Mar-2016
237 Views
Preview:
DESCRIPTION
TRANSCRIPT
REMOTE EQUIPEMENT RENTAL LIST 2012
Magonafilm SrlVia Magona Snc57023 Cecina (Li) ItalyTel. 0586-632142Cell 338-8160531Fax 0586-635039www.magonafilm.itPowered By Cinenane Group
TRUSS RAIL
Truss Dolly can be rigged vertically, horizontally and upside down, locking to trusses.
The system is equipped with internal rope transmission.
Maximum speed: 25 Km/h, optional 40 km
Power requirements: 220 V AC 50 Hz or 380 V AC 50 Hz
Maximum Payload Dolly: 100 kg
Truss Distributed Load: 900 kg
Truss Deflection: 24 mm
Dolly Empty weight: 19 kg
Track Empty weight: 5 kg/mt
Dimensions of Truss: L 200 x W 29 x H 29 cm
BASIC Configuration:
Dolly + Rail 10 mt - Pedestal/Anchor base - Pedal controlled
COMBI DOLLY
Combi Dolly can be used without column
Maximum speed: 25 Km/h optional 40 km/h
Power requirements: 220 V AC 50 Hz
Maximum payload: 200 kg
Dolly empty weight: 32 kg
Track empty weight: 32 kg
Total height (Dolly+Track): 70 cm
Dimension: L 75 x W 50 x H 25 cm.
BASIC Configuration:
Combi Dolly + Straight Track 10 mt – Pedal controlled
COMBI SYSTEM
Combi System can be used with column
Power requirements: 220 V AC 50 Hz
Mount: Euro Adapter
Maximum payload: 100 kg
Column empty weight: 35 kg
Column max speed: 25 mm/sec
Column lift range: 68 cm
Total height (Dolly+Column+Track): 140 cm (with Mini Gyro Head)
Dimension: L 75 x W 50 x H 25 cm
BASIC Configuration:
Combi Dolly + Combi Column + Straight Track 10 mt - Pedal controlled
LIFT RAIL
Lift Rail can be used in vertical position, is versatile and compact
Power requirements: 220 V AC 50 Hz
Mount: Euro Adapter , Jimmy adapter
Maximum payload with remote head: 30 kg
Maximum Lift: 9 mt. (each reail unit is 3 mt., 3-6-9 mt)
Max speed lift: 500 mm/sec
Total height : approximately 9 mt., depending on head
Dimension: L 300/600/900 x W 18 x H 7 cm
Weight: 25 kg
BASIC Configuration:
Lift Rail 3 mt - Pedal or Joystick controlled
SLISA+COMAT SYSTEM
Slisa Rail + Comat Remote Head can be rigged horizontally and upside down.
The system is equipped with inside special alluminium rail with electrical and rope transmission.
Maximum speed: 25 Km/h
Power requirements: 220 V AC 50 Hz
Maximum payload Comat Remote Head: 15 kg
Distributed Load: 200 kg
Total Empty Comat Remote Head weight: 4 kg
Track Empty weight: 1 kg/mt
Dimensions of Truss: L 100/200/300 x W 12 x H 3 cm
BASIC Configuration:
Slisa Rail 10 mt + Comat Remote Head - Pedal or Joystick controlled
FAST ‘N’ FLAT
Fast and Flat can be rigged horizontally - the system is equipped with inside special speed wheels and
Flat Remote Head. Ideal for low size cameras
Maximum speed: 80 km/h
Power requirements: 220 V AC 50 Hz
Maximum Payload Dolly: 80 kg
Truss Distributed Load: 900 kg
Truss Deflection: 24 mm
Dolly Empty weight: 1 kg
Track Empty weight: 6 kg/mt
Dimensions of Folding Track: L 200 x W 40 x H 5 cm
BASIC Configuration:
Fast’n’Flat Remote Head + FastRail 10 mt - Anchor base - Pedal or Joystick
PANTHER REMOTE BTV
Panther Remote Broadcasting TV with motor and controls for camera broadcasting
Dolly: Panther MS III (Technical Data of Panther GmBh)
Maximum speed: 25 km/h
BASIC Configuration:
Panther Remote BTV (including Panther Dolly )+ Straight Track 10 mt - Joystick
SOCCER DOLLY
Remote Dolly ideal for sports with cameraman and dolly operator on board
Maximum speed: 40 km/h
BASIC Configuration:
Soccer Dolly + Straight Track 50 mt – Joystick controlled
TELESCOPIC JIB T 24
Telescopic LLC's Techno-Jib Telescoping Jib Arm represents the next step in the evolution of the camera
jib. Industry veterans created the Techno-Jib to offer the highest quality, most versatile and user-
friendly jib available. With its ability to maneuver into inaccessible areas, and to smoothly, silently and
quickly move in and out of a shot, the Techno-Jib permits innovative and creative shots that have
previously been considered too expensive or technically challenging. Te
Maximum height 25 feet 7.6 metres
Maximum reach 24 feet 7.3 metres
Minimum reach 9 feet 2.7 metres
Minimum total arm length 15.5 feet 4.7 metres
Maximum speed (telescopic movement) 5 feet/second
Maximum load 48 lbs 21.3 kilograms
Weight of arm 430 lbs 200 kilograms
BASIC Configuration:
Telescopic Jib T 24 complete with Jimmy Jib remote Head
MOVIEBIRD 30
MovieBird Crane has been develop with many unique and ingenious feature:
• A crane that is affordable for all types of TV and Film Productions
• A telescopic crane that runs fast and quieter
• A telescopic crane system that take less time to set up and is easier to use
• A lighter and more rigid telescopic crane arm for those long lens shots
Maximum height 33 feet 10 metres
Maximum reach 30 feet 9.1 metres
Minimum reach 7 feet 2.1 metres
Minimum total arm length 15.5 feet 4.7 metres
Maximum speed (telescopic movement) 1.8 metres/sec
Maximum load 165 lbs 70 kilograms
Weight of arm 3300 lbs 1500 kilograms
BASIC Configuration:
Moviebird 30 without Remote Head
MAXI GYROHEAD
MAXI GYROHEAD is the hardware heart of Piuma System. It performs 3 axes connected to computer
driven motor gears. All movements can be programmed and repeated. MAXI GYROHEAD allows
unlimited and totally controlled rotation on each axis. Movement transmission has no backlash. Slip-ring
contacts are in gold and they bear no interference of signal.
Pan, Tilt, Roll: unlimited
Maximum speed: 120°/sec
Power requirements: 48 V DC
Mount: Mitchell
Maximum payload: 50 kg
Empty weight: 39,5 kg
Dimension: L75 x W20 x H100 cm
BASIC Configuration:
Maxi Gyrohead - joystick controlled + CMOTION software (Lens Control System
apart)
MINI GYROHEAD
MINI GYROHEAD is the hardware heart of Piuma System. It performs 3 axes connected to computer
driven motor gears. All movements can be programmed and repeated. Mini Gyrohead's compact
dimensions and light weight make it a perfect tool for TV theatres, live sets and light and fast to rig
dollies.
Pan: unlimited
Tilt: +230° / -30°
Roll: 135°
Maximum speed: 120°/sec
Power requirements: 48 V DC
Mount: Mitchell
Maximum payload: 30 kg
Empty weight: 28 kg
Gyro-stabilization: Yes
Dimension: L70 x W19 x 110 cm
BASIC Configuration:
Mini Gyrohead - joystick controlled + CMOTION software (Lens Control System
apart)
PIUMA SPINHEAD SPH
Spinhead Piuma Remote System is a product by Piumaworld. It is basically an open interface (both
hardware and software) designed to integrate with Cartoni Spinhead – making it a new thing - everytime
a lightweight, cost-effective remote head is requested on stage. The Customer will be able to decide
which elements are needed and add later future developments or new software and hardware.
Pan, Tilt, Nodal: 360°, Fluid Drag continuos 135°
Maximum speed: 45°/sec
Power requirements: 600 W 220 V AC
Mount: Mitchell
Maximum payload: 18 kg
Empty weight: 16 kg
Temperature Operating Range: - 30 + 50 °C
Dimension: base 30x36 cm, H 63 cm underslung, 50 cm on tripod
BASIC Configuration:
Piuma SPH - joystick controlled + CMOTION software (Lens Control System apart)
ACCESSORIES
CMOTION Lens Control Unit €. 500,00
Truss Rail each piece 2 metres €. 100,00
Slisa Rail each metre €. 30,00
Combi Straight Track each metre €. 20,00
Combi Curved 45° ( diam. whole circle 620 cm) €. 30,00
Hydrogenum Power 12-24-48-70 V CC €. 300,00
Hand Weels €. 300,00
Desktop Cart €. 100,00
top related