reference manual - isurplus.com.au qt-2000 reference user manu… · note: casio reserves the right...
Post on 28-Aug-2018
226 Views
Preview:
TRANSCRIPT
QT-2000Versatile Intelligent Terminal———————————————————————
Reference ManualVersion 2.0.0 June 1998
C
7
4
1
0
8
5
200
9
6
3
•
2
Preface
This manual is intended to be used as a reference to the QT-2000 system. It provides detailsto allow whole understanding of the system capabilities, its operation, and how it can be usedto solve many problems within the retail outlet. This manual does not describe actualprogramming, which is covered in the QT-2000 programming manual.
This manual consists of the following chapters:
1. IntroductionThis chapter describes the concepts of development of the QT-2000 system.
2. Hardware configurationThis chapter outlines the hardware, optional devices and configurations of QT-2000system.
3. Application systemsThis chapter outlines the application system and overviews the function provided for theQT-2000 system.
4. Manager operationThis chapter explains the manager operations to use QT-2000 system.
5. RegistrationsThis chapter explains actual registration operations newly added to QT-2000 withexample.
6. Refund mode operationThis chapter explains registrations in the RF or REG– mode.
7. Read and resetThis chapter explains detail of the read and reset operations and reports.
8. System down and recoveryThis chapter explains actions to take and recovery methods when the system goes down.
9. AppendicesThese chapters show the record format and descriptions of individual files, totalcalculation method, meaning of error messages, etc.
Note: Casio reserves the right to change equipment and specifications without obligation andnotification. The terms used in this manual may be different from those used in othermanuals of Casio’s product.
Printing history
Manual version Software versionVersion 1.0.0: May, 1997 First Edition: May, 1997 Version 1.00
Version 1.01Version 1.02
Version 1.1.0: November, 1997 Second Edition: November, 1997 Version 1.10Version 1.2.0: April, 1998 Third Edition: April, 1998 Version 1.20Version 2.2.0: June, 1998 Forth Edition: June, 1998 Version 2.00
Revised points
Version 1.01
1. Display the last 5 registered items when sign-on clerk is designated again in clerkinterrupt operation and when old check operation is performed.
2. Add graphic logo function.
Version 1.02
1. Add delete procedure of printer connection table.2. Add a procedure to copy PLU 1st unit price to 2nd unit price.
3QT-2000 Reference Manual
Version 1.1
1. Add an option to print/not print quantity and unit price in multiplication operation.2. Add a procedure to reprint receipts/reports/order when detecting printer error.3. Print/display J-Memo report by consecutive No. or date order even if the terminal cannot
find the appropriate data.4. Add Canadian tax and Singapore tax, Singapore rounding.5. Add <Tax exempt> function.6. Add <Selective item Subtotal> function.7. Add an option to cancel complete void/current only in <Cancel> key.8. Add an option to print/not print taxable amount 1-5 individually.
Version 1.2
1. Item selection by number without YES key. This can be programmed in generalmachine feature.
2. 2nd@ PLU to be pull down when 2nd@ key is pressed prior to the list key or after pressthe list key.
3. List stays down till you press ESC key.4. List has compulsory stay down instead of compulsory condiment.5. Jump to another List before any items are registered.6. One shot full escape or one step escape for set menu.7. Up to 3rd level entry for Set menu and pull down link.8. Set menu suspend and resume for beverages and sweets.(Post entry)9. Re-entry child PLUs in set menu and pull down link when it was voided.10.Item delete and Line delete11.Round repeat.
Version 2.0
1. Add the Time & Attendance function. This function allows shop owners to control his/her employee’s working conditions.
2. Add the Hourly Labor report function. This function is used to report each employee’shourly report and wages, and also analyze the working efficiency.
3. Add the IDC function. This function is used for capturing all the registered item data bythe REG/REF/REG-modes.
4. Add the Store/Recall function. These functions are used for the driving throughpurchase.
5. Add the Eat-in/Take-out function. By using Take-out key, the items can be exemptedfrom taxation.Introduction
Contents
4
Introduction
The QT-2000 is a versatile intelligent terminal developed in accordance with the following concepts.
1) System conceptDeveloping a high performance economical system by adopting the restaurant, bar system.
– Shared check trackingThe QT-2000 system has the capability of check tracking system.
– Shared printer systemAll terminals in the cluster can share receipt/journal printer(s) and kitchen printer(s).
– Collection, consolidation, and auto-program functionsThe QT-2000 system is equipped with these functions by utilizing high-speed in-line datatransfer system.
– Versatile terminalWith the QT-2000 system, any terminal has the same function, and can be designated asthe master terminal by programming.
2) Software conceptA flexible application system for development, adopting the following methods:
– Function classified application system
3) Design conceptCompact spill-proof body, multi-line LCD
In addition to the above, the QT-2000 is also a terminal following characteristics:
– ExpandabilityThe QT-2000 system can be connected to various peripheral devices (slip printer, R/Jprinter, modem, a personal computer, etc.)
– ReliabilityThe QT-2000 is provided with a self-diagnosis program so that the terminal can check thehardware. When a malfunction occurs during processing, an error report is logged into thesystem memory so that the error can quickly be corrected.
5QT-2000 Reference Manual
1. Hardware configuration ...........................................................................10
1-1. General configuration ................................................................................................ 101-2. Hardware diagram......................................................................................................111-3. Memory layout ........................................................................................................... 121-4. Keyboard ................................................................................................................... 121-5. Display ...................................................................................................................... 141-6. Cash drawer .............................................................................................................. 151-7. Security locks ............................................................................................................ 151-8. Input/output connectors ............................................................................................. 161-9. Optional peripherals .................................................................................................. 171-10. System configuration ................................................................................................. 18
2. Application systems .................................................................................25
2-1. General description of application system ............................................252-1-1. File concept ............................................................................................................... 252-1-2. Linkage of totalizers .................................................................................................. 292-1-3. Function keys ............................................................................................................ 302-1-4. Keyboard layout ........................................................................................................ 322-1-5. Mode control ............................................................................................................. 332-1-6. Operation prompt and error messages ..................................................................... 342-1-7. Printing control system .............................................................................................. 39
2-2. General description of individual function keys.................................... 42
2-2-1. System keys .............................................................................................................. 422-2-2. Finalize keys ............................................................................................................. 432-2-3. Transaction keys ....................................................................................................... 44
2-3. Kitchen printer control ............................................................................. 542-3-1. Kitchen printer system configuration ......................................................................... 542-3-2. Kitchen printer control setting .................................................................................... 552-3-3. Kitchen printer output control .................................................................................... 562-3-4. Kitchen printer backup processes ............................................................................. 56
2-4. Check tracking system............................................................................. 592-4-1. Shared check tracking system .................................................................................. 592-4-2. Shared check tracking requirement .......................................................................... 602-4-3. Data backup when the master goes down ................................................................ 60
2-5. Other check tracking system control .....................................................61
2-5-1. The timing to clear check detail and index file after finalization ................................ 612-5-2. Table transfer ............................................................................................................ 612-5-3. Store and Recall ........................................................................................................ 61
2-6. Clerk control function.................................................................................63
2-6-1. Clerk interrupt ............................................................................................................ 632-6-2. Clerk detail memory .................................................................................................. 642-6-3. Clerk training ............................................................................................................. 642-6-4. Manager mode control .............................................................................................. 64
Contents
6
2-7. Arrangement key function and scheduler ................................................66
2-7-1. Arrangement key function ......................................................................................... 662-7-2. Arrangement program example ................................................................................ 702-7-3. Scheduled execution of arrangement key function ................................................... 70
2-8. Making graphic logo ...................................................................................71
2-8-1. About graphic logo .................................................................................................... 712-8-2. Making graphic logo procedure ................................................................................. 71
2-9. Hourly Item ...............................................................................................722-9-1. Programming necessary files before using hourly item function. .............................. 72
2-10. Time and Attendance................................................................................73
2-10-1. Corresponding relations of the file ............................................................................ 742-10-2. CLOCK-IN Operation ................................................................................................ 762-10-3. CLOCK-OUT Operation ............................................................................................ 79
2-11. Sign-in control ..........................................................................................812-11-1. Sign-in ....................................................................................................................... 812-11-2. Solution to abnormality of master terminal ................................................................ 822-11-3. Solution to abnormality of satellite terminal............................................................... 822-11-4. Sign-in compulsory.................................................................................................... 82
2-12. IDC (Item Data Capture) ...........................................................................83
2-12-1. Available Capturing Items ......................................................................................... 832-12-2. Set Up the IDC Start/End .......................................................................................... 862-12-3. How to memorize the Captured Items....................................................................... 872-12-4. IDC Data File Structure ............................................................................................. 882-12-5. IDC data type ............................................................................................................ 912-12-6. Transferring IDC ........................................................................................................ 922-13-7. Data Transferring Flow .............................................................................................. 92
3. Manager operation....................................................................................96
3-1. Machine initialization................................................................................96
3-1-1. INIT ........................................................................................................................... 983-1-2. Flag clear .................................................................................................................. 983-1-3. INIT 2 ........................................................................................................................ 983-1-4. Restore from flash memory ....................................................................................... 99
3-2. IPL (Initial Program Loading)...................................................................99
3-2-1. IPL ............................................................................................................................. 993-2-2. System configuration before IPL operation ............................................................. 100
7QT-2000 Reference Manual
3-3. Manager function ......................................................................................102
3-3-1. System connection check ....................................................................................... 1023-3-2. Remote on............................................................................................................... 1033-3-3. Remote off ............................................................................................................... 1033-3-4. Busy reset ............................................................................................................... 1043-3-5. Stock maintenance.................................................................................................. 1053-3-6. Drawer for clerk ....................................................................................................... 1063-3-7. CHK# (Clerk interrupt) ............................................................................................. 1063-3-8. Order ID change...................................................................................................... 1073-3-9. Error log print .......................................................................................................... 1083-3-10. System re-configuration .......................................................................................... 1093-3-11. Changing receipt on/off status .................................................................................110
3-4. System command execution ................................................................... 1113-4-1. X/Z reporting ............................................................................................................ 1113-4-2. X/Z collection/consolidation ......................................................................................1123-4-3. Backup/restore the program data .............................................................................1133-4-4. Remote power control ..............................................................................................113
3-5. Data Communication System .................................................................. 1143-5-1. In/on-line connectors ................................................................................................1143-5-2. Hardware interface ...................................................................................................1153-5-3. In/On-line functions ..................................................................................................117
3-6. Collection/Consolidation system .......................................................... 118
3-6-1. X/Z collection ........................................................................................................... 1203-6-2. X/Z consolidation ..................................................................................................... 1223-6-3. X/Z collection/consolidation ..................................................................................... 124
3-7. Auto-programming function ....................................................................127
3-7-1. Auto programming functions ................................................................................... 1273-7-2. Auto program operation .......................................................................................... 128
3-8. Command receive function ......................................................................129
3-8-1. Command receiving procedure ............................................................................... 129
4. Registrations ...........................................................................................1324-1. Clerk sign on/off operation ...................................................................................... 1324-2. Voiding the last registered item (<VOID> key operation) ........................................ 1334-3. Voiding the previous registered item (<VOID> key operation) ................................ 1344-4. Cancelling of all data registered during the transaction .......................................... 1344-5. Using the LIST function ........................................................................................... 1364-6. Using the Set Menu function and Pulldown group function ..................................... 1374-7. Separate check ....................................................................................................... 1404-8. Open check ............................................................................................................. 1414-9. Media Change ......................................................................................................... 1424-10. Eat-in/Take-out ........................................................................................................ 143
Contents
8
5. Refund mode operation .........................................................................146
5-1. Selecting RF or REG– Mode................................................................................... 146
6. Read and reset operations.....................................................................1486-1. The procedures of reading or resetting ................................................................... 1486-2. Report sample ......................................................................................................... 149
A-1. Function key list .......................................................................................166
A-2. File list .......................................................................................................168
A-3. File format ...............................................................................................173
A-4. Counter and Totalizer calculation method ...........................................230
A-5. Error messages ........................................................................................234
A-6. Memory map ............................................................................................244
Index .................................................................................................................. 248
9QT-2000 Reference Manual
1. Hardware configuration............................................................................. 101-1. General configuration........................................................................................ 101-2. Hardware diagram ............................................................................................ 111-3. Memory layout .................................................................................................. 121-4. Keyboard........................................................................................................... 121-5. Display .............................................................................................................. 141-6. Cash drawer...................................................................................................... 151-7. Security locks .................................................................................................... 151-8. Input/output connectors .................................................................................... 161-9. Optional peripherals .......................................................................................... 171-10. System configuration ........................................................................................ 18
10
Hardware Configuration
1. Hardware configuration
This section outlines the hardware, optional devices, and configurations of the QT-2000system.
1-1. General configuration
C7
41
0
85
200
96
3•
LCD panel
Rear display (option)
Main power switch (bottom)
Contrast control knob
Connector cover
Sheet holder
Infrared communicationport
Sheet holder sensors
Front view
Sheet opener key
11QT-2000 Reference Manual
Keyboard
Sheet Holder
Optional Sheet Holder (SH-KIT1)
Powersupply
ReardisplayQT-2060D
MCR i/f
Slip printer
i/f
KPinline
Reardisp.
i/f
2ndLCD
i/f
Drawer
ScannerHHS-9
Magneticcard readerQT-2046MCKitchen
printerKP-200KP-300
QT-2000
QT-2000
QT-2000
Remotedisp.
i/f
Clerkkeyi/f
Drawer1 i/f
Drawer2 i/f
MDL-8Inline
RS-232CCOM1
RS-232CCOM2
RS-232CCOM3
Ircommport
Drawer
Clerk key
RemotedisplayQT-2063D
SlipprinterSP-1200/SA-3015
MODEMorPCor
Printer
CPURAM RAM RAMROM Flash
Memory
128KB 2MB 256KB 128KB 512KB
2nd LCD Main LCD
Kitchen printerKP-200KP-300
Kitchen printerKP-200KP-300
Note: Shadowed device and dot line indicate option devices.
RAM-610-10LL
QT-
2061
S SA-1
062S
SA-3
087T
M
QT-2062D
(Only for German model)
Clerk keysCLK-K17/-K18
Power supplyPS-170/-150
R/J printerUP-350/SA-3015/TM-U300/
CBM-231/iDP-3541
Power supplyPS-170/-150
R/J printerUP-350/SA-3015/TM-U300/
CBM-231/iDP-3541or
RAM
128KB
1-2. Hardware diagram
12
Hardware Configuration
RAM
512KB
Standard Option
Memory capacity
512kB
1MB (Max.)
ESC/SKIPC
7
4
1
0
X
8
5
2
00YES
NO
COVERS 9
6
3
•
9
8
7
6
5
4
3
2
1
18
17
16
15
14
13
12
11
10
27
26
25
24
23
22
21
20
19
36
35
34
33
32
31
30
29
28
45
44
43
42
41
40
39
38
37
54
53
52
51
50
49
48
47
46
63
62
61
60
59
58
57
56
55
72
71
70
69
68
67
66
65
64
81
80
79
78
77
76
75
74
73
90
89
88
87
86
85
84
83
82
99
98
97
96
95
94
93
92
91
108
107
106
105
104
103
102
101
100
DISPON/OFF
REG.MODE
X/ZMODE
PGM.MODE
NEW/OLDCHK
ADDCHK
SEPCHK
HOUSEBON
SEATNo.
CLK#1
CLK#5
CLK#4
CLK#3
CLK#2
RC PD
VAT
%--
SUBST.
CH
CR
CHK
NB
VOID CANCEL
GUESTRECEIPT
TABLETRANS
MENUSHIFT
CASH AMTTEND
#/NS
HOME
PAGEUP
PAGEDOWN
SUB TOTAL
1-4. Keyboard
1-4-1. Standard keyboard
1-3. Memory layout
13QT-2000 Reference Manual
14
13
12
11
10
9
8
7
6
5
4
3
2
1
30
29
28
27
26
25
24
23
22
21
20
19
18
17
46
45
44
43
42
41
40
39
38
37
36
35
34
33
62
61
60
59
58
57
56
55
54
53
52
51
50
49
78
77
76
75
74
73
73
71
70
69
68
67
66
65
94
93
92
91
90
89
88
87
86
85
84
83
82
81
110
109
108
107
106
105
104
103
102
101
100
99
98
97
142
141
140
139
138
137
136
135
134
133
132
131
130
129
126
125
124
123
122
121
120
119
118
117
116
115
114
113
158
157
156
155
154
153
152
151
150
149
148
147
146
145
174
173
172
171
170
169
168
167
166
165
164
163
162
161
190
189
188
187
186
185
184
183
182
181
180
179
178
177
1-4-2. Hard key code of keyboard
14
Hardware Configuration
Coffee $8.0012 ST $76.50
REG C01 15-12-97 12:34 001234 1 Spagetti $20.00 T1 1 Spagetti $20.00 T1 7.5% %- -1.50 1 Coffee $8.00 1 Hamburger $2.00 T1 15% %- -0.30 1 Milk $2.00 2 Apple Juice $5.00 1 Coffee $8.00
Mode Clerk Date Time Consecutive number
Transactions
Last transaction
Item sold Subtotal/Total/ChangeStatus Icons
• Communication: • Receipt on:
• Menu sheet No.: • Character shift: : Capital, double : Capital, standard
• 2nd unit price: : Small, double : Small, standard
• Master/BM error: • Cut off Master or BM:
Scroll area
1
1
!2nd@
2nd@ A
A Aa a
R
R
2º50
SIRLOIN STEAK
Alphanumeric display (16 digits, 7 × 5 dot)
Numeric display (11 digits)
1-5. Display
1-5-1. Main display (First and second LCD)
1-5-2. Customer display (Rear display: option)
15QT-2000 Reference Manual
1-6. Cash drawer
Medium size drawer is provided for the standard QT-2000.This type of drawer is a close lock type.
When you want to set the QT-2000 terminal on the drawer, set and tighten two screws onthe bottom side to fix the terminal on the drawer.
1-7. Security locks
Security locks provided include cash drawer lock key and clerk switch.Normally, the mode switch and printer cover lock key are included in security locks, butin QT-2000, the modes are controlled by mode control keys (such as “REG MODE”, “X/Z MODE”, etc.) and the printers connected to QT-2000 system have no printer cover keys.
1-7-1. Drawer lock keyThis key is used to lock the cash drawer.
1-7-2. Clerk switch (for German model only)The clerk switch is provided only for German model, and is located on the right side of theterminal. The clerk keys (for 6 clerks) are used enable/disable the register instead of theclerk sign on/off operation. The clerk switch and clerk keys are optional items for othercountries.
16
Hardware Configuration
RS-232C Com1
RS-232C Com3
Slip printer port
Power switch
RS-232C Com2
Drawer cable
Infrared port
In-line(white)
KP In-line (red)
Bottom view
Side view
RS-232C COM3
1-8. Input/output connectors
RS-232C Com 1 is for Hand held scanner (HHS-9) or Printer*.RS-232C Com 2 is for Printer* or PC.RS-232C Com 3 is for Modem or PC direct connection or Printer* or EFT (US only).
* Available printer list
TM-T85 (CASIO UP-350)TM-U950 (CASIO SA-3015)TM-U300 (EPSON)CBM-231 (CITIZEN)iDP-3541 (CITIZEN)
17QT-2000 Reference Manual
1-9. Optional peripherals
The following optional peripherals can be used by plugging them into the appropriate port.
1) Scanner: RS-232C Com1 port (future support)Hand-held scanner (HHS-9) (Matsushita)
2) Slip printer: Slip printer portSP-1200The slip printer is used for validations, detailed slips, and endorsement.
3) Receipt/journal printer: RS-232C Com2 portUP-350 or SA-3015The receipt/journal printer is used for receipts/journal/reports.
4) Personal computer/MODEM: RS-232C Com3 port
5) KP in-line and Kitchen printer: KP in-line portKP-200 or KP-300The kitchen printer is used for order receipt.
6) In-line and other QT-2000: In-line port
7) Drawer: drawer port
18
Hardware Configuration
1-10. System configuration
This section represents the system configuration of the QT-2000. The QT-2000 has threedifferent system configurations, such as shared check tracking/floating clerk interruptsystem, in-line collection/consolidation system and on-line collection/consolidation sys-tem.Before detail explanation, we should define the words:1) Check master:
Check master is the master server of shared check tracking system and floating clerkinterrupt system. This terminal has check index and detail files and controls them.
2) Check backup master:Check backup master is the backup server of shared check tracking system and floatingclerk interrupt system. This terminal also has check index and detail files and updatethem at the same timing of master.When the check master goes down, the backup master plays the role of check master.
3) Kitchen printer master:Kitchen printer master is the master server of kitchen printer control.This terminal outputs item data sent from terminals of the cluster to kitchen printer(s).
4) Kitchen printer backup master:Kitchen printer backup master is the backup server of kitchen printer control.When the KP master goes down, this terminal (KP backup master) plays the role of KPmaster.
5) Satellite:The terminal which is not assigned to 1) ~ 4) above.
6) Remote printer:Remote printer prints data sent from both its own QT-2000 terminal and other terminalof the cluster.
7) Local printer:Local printer prints data sent from its own QT-2000 terminal.
1-10-1. Shared check tracking system/floating clerk interrupt system
KP KP KP
QT2000QT2000QT2000QT2000
R/JSlip SlipSlip
KPPC
RS-232C
Up to 4 kitchen printers
Up to 4 QT-2000 terminals
KP/M CHK/BM CHK/M KP/BM
R/JPRN (1) PRN (2)
19QT-2000 Reference Manual
noitinifedRCEslarehpireP
nehctiKretnirp
etomeRretnirp
lacoLretnirp
pilSretnirp
/CPderarfnI
retsamkcehC ✓✓✓✓✓ ✓✓✓✓✓ ✓✓✓✓✓
retsampukcabkcehC ✓✓✓✓✓ ✓✓✓✓✓ ✓✓✓✓✓
retsamPK ✓✓✓✓✓ ✓✓✓✓✓ ✓✓✓✓✓ ✓✓✓✓✓
retsampukcabPK ✓✓✓✓✓ ✓✓✓✓✓ ✓✓✓✓✓ ✓✓✓✓✓ ✓✓✓✓✓
etilletaS ✓✓✓✓✓ ✓✓✓✓✓ ✓✓✓✓✓ ✓✓✓✓✓
System Recommendation (in case of more than 2 QT-2000 terminals in the cluster)
Available peripherals versus ECR definition
✓: Available
Available combinations ECR definition
noitinifedRCEkcehCretsam
kcehCpukcabretsam
PKretsam
PKpukcabretsam
lanimreTetomer/w
retnirpretsamkcehC
retsampukcabkcehCretsamPK
retsampukcabPK ✓✓✓✓✓
retnirpetomer/wlanimreT ✓✓✓✓✓
✓: Available
Note:1) Please follow the system recommendation above. Otherwise the system performance
may be slow down.
KP KP KP
QT2000QT2000QT2000
R/JSlip Slip
KPPC
RS-232C
Up to 4 kitchen printers
KP/M CHK/M KP/BMCHK/BM
KP KP KP
QT2000QT2000
R/JSlip
KPPC
RS-232C
Up to 4 kitchen printers
KP/MCHK/M
KP/BMCHK/BM
3 terminals/cluster 2 terminals/cluster
R/JPRN (1) PRN (2) PRN (1)
20
Hardware Configuration
QT2000-32QT2000-3QT2000-2QT2000-1
PC
on-line
Note: When the cluster has more than 8 QT-2000 terminals, all printer should be local printer. When the cluster has less than or equal to 8 QT-2000 terminals, remote printer is allowable.
R/J R/J R/J R/J R/J R/J R/J R/JPRN (1) PRN (2) PRN (1) PRN (2) PRN (1) PRN (2) PRN (1) PRN (2)
QT2000-32QT2000-4QT2000-2QT2000-1
R/J
Note: When the cluster has more than 8 QT-2000 terminals, all printer should be local printer. When the cluster has less than or equal to 8 QT-2000 terminals, remote printer is allowable. PC
In-line
R/J R/J R/J R/J R/J R/J R/JPRN (1) PRN (2) PRN (1) PRN (2) PRN (1) PRN (2) PRN (1) PRN (2)
1-10-2. In-line collection/consolidation system• In-line collection/consolidation and auto-programming for up to 32 QT-2000 termi-
nals.
1-10-3. On-line collection/consolidation system• On-line collection/consolidation and auto-programming for up to 32 QT-2000 terminals.
21QT-2000 Reference Manual
1-10-4. Connectable system configurationIn this section, you can see the six pattern of connectable RS-232C printer, modem(including the modem which connect to PC directly). Each ECR show below enables toconnect two RS-232C printers.
Configuration 1: Two RS-232C printers / One Modem
Configuration 2: Two RS-232C printers
Configuration 3: One RS-232C printer / One Modem
Configuration 4: One RS-232C printer
RS-232CCOM1
RS-232CCOM2
RS-232CCOM3
MODEMPrinter 2Printer 1
RS-232CCOM1
RS-232CCOM2
RS-232CCOM3
Printer 1 Printer 2
RS-232CCOM1
RS-232CCOM2
RS-232CCOM3
MODEMPrinter 1
RS-232CCOM1
RS-232CCOM2
RS-232CCOM3
Printer 1
22
Hardware Configuration
Configuration 5: One Modem
Configuration 6: One Modem
1-10-4-1Assign for CPM port and device
Note:1. Configuration 2~6 are available to connect to the Kitchen Printer when COM 1 is not
used.2. Two printers are available to connect to an ECR at the same time.3. The maximum total capacity of Baud rate is 38400bps (except the baud rate of kitchen
printer).4. It is not available to use the modem and EFT at the same time even if they are connected
to different port.5. It is available to assign the two printers to the same port. In this case, assign these
printers by the operation.
RS-232CCOM1
RS-232CCOM2
RS-232CCOM3
MODEM
RS-232CCOM1
RS-232CCOM2
RS-232CCOM3
MODEM
Printer
COM 1 COM 2 COM 3
Connect toModem or PC
O O O
O O×
O: Available to run× : Not available to run
23QT-2000 Reference Manual
2. Application systems ................................................................................ 252-1. General description of application system ........................................... 25
2-1-1. File concept....................................................................................................... 252-1-2. Linkage of totalizers .......................................................................................... 292-1-3. Function keys .................................................................................................... 302-1-4. Keyboard layout ................................................................................................ 322-1-5 Mode control ..................................................................................................... 332-1-6. Operation prompt and error messages ............................................................. 342-1-7. Printing control system...................................................................................... 39
2-2. General description of individual function keys................................... 422-2-1. System keys...................................................................................................... 422-2-2. Finalize keys ..................................................................................................... 432-2-3. Transaction keys ............................................................................................... 44
2-3. Kitchen printer control ............................................................................ 542-3-1. Kitchen printer system configuration ................................................................. 542-3-2. Kitchen printer control setting ........................................................................... 552-3-3. Kitchen printer output control ............................................................................ 562-3-4. Kitchen printer backup processes ..................................................................... 56
2-4. Check tracking system............................................................................ 592-4-1. Shared check tracking system .......................................................................... 592-4-2. Shared check tracking requirement .................................................................. 602-4-3. Data backup when the master goes down ........................................................ 60
2-5. Other check tracking system control .................................................... 612-5-1. The timing to clear check detail and index file after finalization ........................ 612-5-2. Table transfer .................................................................................................... 612-5-3. Store and Recall ............................................................................................... 61
2-6. Clerk control function................................................................................ 632-6-1. Clerk interrupt ................................................................................................... 632-6-2. Clerk detail memory .......................................................................................... 642-6-3. Clerk training ..................................................................................................... 642-6-4. Manager mode control ...................................................................................... 64
2-7. Arrangement key function and scheduler ............................................... 662-7-1. Arrangement key function ................................................................................. 662-7-2. Arrangement program example ........................................................................ 702-7-3. Scheduled execution of arrangement key function ........................................... 70
2-8. Making graphic logo .................................................................................. 712-8-1. About graphic logo ............................................................................................ 712-8-2. Making graphic logo procedure......................................................................... 71
2-9. Hourly Item .............................................................................................. 722-9-1. Programming necessary files before using hourly item function. ...................... 72
2-10. Time and Attendance............................................................................... 732-10-1. Corresponding relations of the file .................................................................... 742-10-2. CLOCK-IN Operation ........................................................................................ 762-10-3. CLOCK-OUT Operation .................................................................................... 79
24
Application System
2-11. Sign-in control ......................................................................................... 812-11-1. Sign-in ............................................................................................................... 812-11-2. Solution to abnormality of master terminal........................................................ 822-11-3. Solution to abnormality of satellite terminal ...................................................... 822-11-4. Sign-in compulsory ........................................................................................... 82
2-12. IDC (Item Data Capture) .......................................................................... 832-12-1. Available Capturing Items ................................................................................. 832-12-2. Set Up the IDC Start/End .................................................................................. 862-12-3. How to memorize the Captured Items .............................................................. 872-12-4. IDC Data File Structure ..................................................................................... 882-12-5. IDC data type .................................................................................................... 912-12-6. Transferring IDC ............................................................................................... 922-13-7. Data Transferring Flow...................................................................................... 92
25QT-2000 Reference Manual
2. Application systems
This section describes the configuration of application system and their related setting withthe QT-2000. Reading this section provides a general understanding of the overall systemof the QT-2000.
2-1. General description of application system
2-1-1. File concept
Programming data for each function, as well as registration data, are assigned and handledin the RAM of the QT-2000 in data blocks called files. Each files identified by a 3-digitfile number, and consists of multiple records that affect the length and data format of thefile. The QT-2000 stores the location in RAM for each file in a work area, and specificationof a data location for accessing is accomplished using the file number, record number andrecord format.Memory management on a file basis allows flexibility memory allocation in accordancewith the application of a specific terminal and its memory capacity. The number of recordsper file can be programmed, and a file can even be programmed for zero records.
There are three types of files:– Terminal files:
Terminal files include system work files, daily total files, periodic total 1 and periodictotal 2 files. Periodic total files have only totalizer field, and totalize the same data whichis accumulated to terminal files at the same time. The periodic total 1 files have 100order file numbers, and the periodic total 2 files have 200 order file numbers.These files can be reset individually and separately from the terminal files. Thisprovides access to weekly and monthly total data. The periodic total 1 files and 2 fileshave the same functions, and can accumulate data with different periods. The samenumber of records as the corresponding terminal file must be reserved for each periodictotal files.
– Consolidation files:Consolidation files are work files for consolidation of daily total, periodic 1 total andperiodic 2 total data from each terminal, and have 300, 400 and 500 order file numbers,respectively. The same number of records as the corresponding terminal files must bereserved for each file, on the master terminal.
– Consolidation work files:Consolidation work files are work files for collection/consolidation of daily, periodic1/2 data from each terminal. The files have 600 order file numbers.The file number of records as the corresponding terminal file must be reserved for eachconsolidation file.
Each file requires an internal work area, so calculation of actual file size can be performedusing the following formula:
Record length × Number of records + Work area = Actual file size
The following table shows all the files available for QT-2000. See the Appendix A-3 of thismanual for detail formats of individual files.
26
Application System
eliF.oN
noitpircsedeliFdroceRhtgnel
.oN.xaMsdrocerfo
kroWezis
noitpircseD-ubirttA
noit-tacollA
elba-kcaB
puselifmetsyS
109 elbatnoitcennocmetsyS 81 33 57 margorP oN seY209 retemarapO/I 5 01 96 margorP oN seY309 noitcennocretnirP 72 99 18 margorP oN seY409 rebmunevitucesnoC 3 1 96 reffuB oN seY999 golrorremetsyS 11 999 99 reffuB oN seY
seliflatotdnanoitcnuF
100 rezilatotdexiF 62 95 18 elaS/mgP seY seY101 )1latotcidoirep( 01 95 57 selaS seY seY102 )2latotcidoirep( 01 95 57 selaS seY seY103 )noitadilosnocyliad( 01 95 57 retsamrof selaS seY oN104 )noitadilosnoc1cidoirep( 01 95 57 retsamrof selaS seY oN105 )noitadilosnoc2cidoirep( 01 95 57 retsamrof selaS seY oN106 )krownoitadilosnoc( 01 95 57 retsamrof reffuB seY oN200 noitcnufeerF 83 999 99 elaS/mgP seY seY201 )1latotcidoirep( 01 999 57 selaS seY seY202 )2latotcidoirep( 01 999 57 selaS seY seY203 )noitadilosnocyliad( 01 999 57 retsamrof selaS seY oN204 )noitadilosnoc1cidoirep( 01 999 57 retsamrof selaS seY oN205 )noitadilosnoc2cidoirep( 01 999 57 retsamrof selaS seY oN206 )krownoitadilosnoc( 01 999 57 retsamrof reffuB seY oN300 tnemtrpapedbuS 45 99 531 elaS/mgP seY seY301 )1latotcidoirep( 51 99 18 selaS seY seY302 )2latotcidoirep( 51 99 18 selaS seY seY303 )noitadilosnocyliad( 51 99 18 retsamrof selaS seY oN304 )noitadilosnoc1cidoirep( 51 99 18 retsamrof selaS seY oN305 )noitadilosnoc2cidoirep( 51 99 18 retsamrof selaS seY oN306 )krownoitadilosnoc( 51 99 18 retsamrof reffuB seY oN400 ULP 29 9999 771 elaS/mgP seY seY500 tnemtrapeD 45 99 531 elaS/mgP seY seY501 )1latotcidoirep( 51 99 18 selaS seY seY502 )2latotcidoirep( 51 99 18 selaS seY seY503 )noitadilosnocyliad( 51 99 18 retsamrof selaS seY oN504 )noitadilosnoc1cidoirep( 51 99 18 retsamrof selaS seY oN505 )noitadilosnoc2cidoirep( 51 99 18 retsamrof selaS seY oN506 )krownoitadilosnoc( 51 99 18 retsamrof reffuB seY oN600 puorG 62 99 18 elaS/mgP seY seY601 )1latotcidoirep( 01 99 57 selaS seY seY602 )2latotcidoirep( 01 99 57 selaS seY seY603 )noitadilosnocyliad( 01 99 57 retsamrof selaS seY oN604 )noitadilosnoc1cidoirep( 01 99 57 retsamrof selaS seY oN605 )noitadilosnoc2cidoirep( 01 99 57 retsamrof selaS seY oN606 )krownoitadilosnoc( 01 99 57 retsamrof reffuB seY oN900 selasylruoH 02 999 78 elaS/mgP seY seY901 )1latotcidoirep( 02 999 78 selaS seY seY902 )2latotcidoirep( 02 999 78 selaS seY seY903 )noitadilosnocyliad( 02 999 78 retsamrof selaS seY oN904 )noitadilosnoc1cidoirep( 02 999 78 retsamrof selaS seY oN905 )noitadilosnoc2cidoirep( 02 999 78 retsamrof selaS seY oN906 )krownoitadilosnoc( 02 999 78 retsamrof reffuB seY oN010 selasylhtnoM 02 23 78 elaS/mgP seY seY011 )1latotcidoirep( 02 23 78 selaS seY seY012 )2latotcidoirep( 02 23 78 selaS seY seY013 )noitadilosnocyliad( 02 23 78 retsamrof selaS seY oN014 )noitadilosnoc1cidoirep( 02 23 78 retsamrof selaS seY oN015 )noitadilosnoc2cidoirep( 02 23 78 retsamrof selaS seY oN
27QT-2000 Reference Manual
eliF.oN
noitpircsedeliFdroceRhtgnel
.oN.xaMsdrocerfo
kroWezis
noitpircseD-ubirttA
noit-tacollA
elba-kcaB
pu016 )krownoitadilosnoc( 02 23 78 retsamrof reffuB seY oN210 nosaerdioV 92 99 78 elaS/mgP seY seY211 )1latotcidoirep( 01 99 57 selaS seY seY212 )2latotcidoirep( 01 99 57 selaS seY seY213 )noitadilosnocyliad( 01 99 57 retsamrof selaS seY oN214 )noitadilosnoc1cidoirep( 01 99 57 retsamrof selaS seY oN215 )noitadilosnoc2cidoirep( 01 99 57 retsamrof selaS seY oN216 )krownoitadilosnoc( 01 99 57 retsamrof reffuB seY oN810 sisylanaelbaT 23 9999 39 elaS/mgP seY seY811 )1latotcidoirep( 01 9999 57 selaS seY seY812 )2latotcidoirep( 01 9999 57 selaS seY seY813 )noitadilosnocyliad( 01 9999 57 retsamrof selaS seY oN814 )noitadilosnoc1cidoirep( 01 9999 57 retsamrof selaS seY oN815 )noitadilosnoc2cidoirep( 01 9999 57 retsamrof selaS seY oN816 )krownoitadilosnoc( 01 9999 57 retsamrof reffuB seY oN020 latotdnarG 42 3 57 elaS/mgP seY seY021 )1latotcidoirep( 8 3 96 selaS seY seY022 )2latotcidoirep( 8 3 96 selaS seY seY023 )noitadilosnocyliad( 8 3 96 retsamrof selaS seY oN024 )noitadilosnoc1cidoirep( 8 3 96 retsamrof selaS seY oN025 )noitadilosnoc2cidoirep( 8 3 96 retsamrof selaS seY oN026 )krownoitadilosnoc( 8 3 96 retsamrof reffuB seY oN
krelC700 krelC 59 99 561 margorP seY seY030 knilliatedkrelC 4 021 57 margorP seY seY110 liatedkrelC 01 99 57 selaS seY seY111 )1latotcidoirep( 01 99 57 selaS seY seY112 )2latotcidoirep( 01 99 57 selaS seY seY113 )noitadilosnocyliad( 01 99 57 retsamrof selaS seY oN114 )noitadilosnoc1cidoirep( 01 99 57 retsamrof selaS seY oN115 )noitadilosnoc2cidoirep( 01 99 57 retsamrof selaS seY oN116 )krownoitadilosnoc( 01 99 57 retsamrof reffuB seY oN
ecnadnettA&emiT410 robaL/ylruoH 62 69 margorP seY seY411 )1latotcidoirep( 62 69 selaS seY seY412 )2latotcidoirep( 62 69 selaS seY seY413 )noitadilosnocyliad( 62 69 retsamrof selaS seY seY414 )noitadilosnoc1cidoirep( 62 69 retsamrof selaS seY seY415 )noitadilosnoc2cidoirep( 62 69 retsamrof selaS seY seY416 )krownoitadilosnoc( 62 69 retsamrof selaS seY seY910 emiTkroW 71 9999 margorP seY seY911 )1latotcidoirep( 71 9999 selaS seY seY912 )2latotcidoirep( 71 9999 selaS seY seY913 )noitadilosnocyliad( 71 9999 retsamrof selaS seY seY914 )noitadilosnoc1cidoirep( 71 9999 retsamrof selaS seY seY915 )noitadilosnoc2cidoirep( 71 9999 retsamrof selaS seY seY916 )krownoitadilosnoc( 71 9999 retsamrof selaS seY seY008 enoZemiT 6 42 margorP seY seY108 eeyolpmE 53 99 margorP seY seY208 edocboJ 22 05 margorP seY seY308 eludehcS 11 999 margorP seY seY608 krowecnadnettA&emiT 1 99kcehC
510 xednIkcehC margorP seY seY060 liatedkcehC margorP seY seY660 krowliatedkcehC selaS seY seY
28
Application System
eliF.oN
noitpircsedeliFdroceRhtgnel
.oN.xaMsdrocerfo
kroWezis
noitpircseD-ubirttA
noit-tacollA
elba-kcaB
pumetIylruoH
120 metIylruoH 01 0291 margorP seY seY121 )1latotcidoirep( 01 0291 margorP seY seY122 )2latotcidoirep( 01 0291 margorP seY seY123 )noitadilosnocyliad( 01 0291 retsamrof margorP seY seY124 )noitadilosnoc1cidoirep( 01 0291 retsamrof margorP seY seY125 )noitadilosnoc2cidoirep( 01 0291 retsamrof margorP seY seY126 )krownoitadilosnoc( 01 0291 retsamrof margorP seY seY130 kniLmetIylruoH 4 084 margorP seY seY
CDI750 )1(CDI 05 9999 selaS seY seY753 )elifnoitadilosnoc( 05 9999 retsamrof selaS seY seY756 )krownoitadilosnoc( 05 9999 retsamrof selaS seY seY850 )2(CDI 05 9999 selaS seY seY853 )elifnoitadilosnoc( 05 9999 retsamrof selaS seY seY856 )krownoitadilosnoc( 05 9999 retsamrof selaS seY seY950 )3(CDI 05 9999 selaS seY seY953 )elifnoitadilosnoc( 05 9999 retsamrof selaS seY seY956 )krownoitadilosnoc( 05 9999 retsamrof selaS seY seY360 reffuBCDI 05 9999 reffuB seY seY408 knilCDI 6 999 margorP seY seY
reffub/egassem/margorP220 lortnoclareneG 6 43 96 margorP oN seY320 retcarahclaicepS 61 82 96 margorP oN seY420 redaehtropeR 61 71 96 margorP oN seY520 elbatxaT 8 5 39 margorP seY seY620 puorgnwodlluP 301 9999 981 margorP seY seY820 elbatunemteS 08 999 381 margorP seY seY920 Z/XhctaB 9 01 96 margorP seY seY230 egassempils/tpieceR 04 74 96 margorP seY seY330 egassemesrodnE 04 4 96 margorP seY seY530 reffubtnirP 77 999 96 reffuB seY oN630 reffubnoitartsigeR 07 004 96 reffuB seY oN730 reffubdiovllA 02 9999 96 DO TON ETELED B reffu Y SE NO
930 llacerretcarahC 04 9999 96 margorP seY seY140 tnirpkcehC 3 9 96 margorP seY seY340 reffubyalpsidyromemlanruoJ 04 999 96 reffuB seY oN440 reffubyalpsiD 04 999 96 reffuB seY oN740 ogolcihparG 31 234 96 margorP seY seY840 reffubyromemlanruoJ 14 002 96 reffuB seY oN450 @dn2ULP 24 9999 99 margorP seY seY260 reludehcS 41 99 57 margorP seY seY560 retcarahcredrO 61 99 96 margorP seY seY470 elbatyeK 63 291 171 margorP oN seY
tnemegnarrA830 )1(puorgegnarrA 42 9999 96 margorP seY seY831 )2(puorgegnarrA 42 9999 96 margorP seY seY832 )3(puorgegnarrA 42 9999 96 margorP seY seY833 )4(puorgegnarrA 42 9999 96 margorP seY seY834 )5(puorgegnarrA 42 9999 96 margorP seY seY
29QT-2000 Reference Manual
2-1-2. Linkage of totalizers
Registered data is accumulated to totalizers which are reserved for each functions.The QT-2000 has the following types of totalizers:1) Fixed totalizers
Registration data is accumulated for individual terminals.2) Function key totalizers
Data input by finalize or transaction keys is accumulated in totalizers for each key.Operation types, as well as data used in operation differ depending on the key.
3) Subdepartment totalizersRegistration data is accumulated in totalizers for each subdepartment.
4) Department totalizersRegistration data is accumulated in totalizers for each department.
5) Group totalizersRegistration data is accumulated in totalizers for each group.
6) PLU totalizersRegistration data is accumulated in totalizers for each PLU.
7) Clerk totalizersRegistration data is accumulated for each relevant clerk. A clerk detail totalizer can belinked to a fix totalizer, finalize key, transaction key, or department totalizer, andaccumulate data registered for the destination totalizer for each relevant clerk.
8) Other totalizerFunctions for hourly sales and monthly sales also have totalizers.
30
Application System
Calculation
Fixed totalizer PLU file Subdept. file Dept. file Group file Clerk detail file Other fileFunction keytotalizer
Registration
*1 *1 *1
*2
Registration data flow
*1 Linking between PLUs, subdepartments, departments and groups can be programmedto meet the needs of the retail environment.PLUs can be programmed to link with subdepartments, departments or group, whilesubdepartment can be programmed to link with department or group, and departmentcan be programmed to link with group.When a PLU is programmed to link with a department, data registered for the PLU isalso accumulated to the department. In addition, when the department is programmedto link with a group, data registered for the PLU is simultaneously reflected thedepartment totalizer and group totalizer.
*2 When data is registered to a totalizer which is present in the clerk detail link table, thedata is also accumulated to the clerk detail totalizer reserved for each relevant clerk.
2-1-3. Function keys
The keys on the keyboard can be assigned various functions that are used for registrationas required for the terminal. For convenience sake, these functions are called by functionkeys.There are two types of function keys:
1) System keysThere are function keys which have functions that are fixed by the system (Numeralkeys, clear key, home position key, left/right/up/down cursor key, yes/no key, on/offkey, mode selection key and ESC/SKIP key
2) Free Function keysThese function keys are used for finalize a transaction, to specify the functions for aregistration or to specify the meaning of a entry. These function keys have program-mable functions, which are set to the function key file.Free function keys include finalize key, transaction key, department key and touch PLUkey.
The list of all function keys provided for QT-2000 is shown on the next page. Generaldescriptions of individual function keys are found in the chapter 2-2.
31QT-2000 Reference Manual
noitcnuF edoC retcarahclaitinI noitcnuF edoC retcarahclaitinIkcehcddA 490 KHCDDA tuodiaP 120 DP
tnemegnarrA 440 GRA pukciP 220 PU.PypoclliB 740 LLIB sulP 920 +
tuo/ni-kaerB 901 TUO/NI-KAERB ULP 840 #ULPlecnaC 632 LECNAC yrtnEtsoP 511 YRTNETSOP
derednettnuomahsaC 100 HSAC edommargorP 321 EDOMMGPegrahC 200 EGRAHC muimerP 030 +%
tnemesrodnekcehC 930 E.KC yriuqniecirP 800 QNICRPtnirpkcehC 210 PKHC ecirP 940 CRPrednetkcehC 300 KCEHC roF/ytitnauQ 380 TQrebmunkrelC 270 #KLC llaceR 131 LLACERrefsnartkrelC 310 SNARTKLC tpieceR 830 TCR
tuo/ni-kcolC 801 TUO/NI-KCOLC FFO/nOtpieceR 670 FFO/NOTCRnopuoC 320 NOPUOC tnuoccanodevieceR 020 CR
2nopuoC 630 2NPC dnufeR 330 FRtiderC 400 TIDERC edomretsigeR 121 EDOMGER
ebuC 090 XXX taepeRdnuoR 611 TAEPERRegnahcxeycnerruC 540 EC rebmuntaeS 911 #TAES
rebmunremotsuC 340 TC ecirptinudnoceS 070 @dn2tnioplamiceD 890 . latotbusmetievitceleS 580 TSIS
)erutuf(noitaralceD 160 ALCED kcehcetarapeS 590 KHCPEStnemtrapeD 150 TPED esaeleR/deefkcabpilS 450 R/BS
rebmuntnemtrapeD 531 #TPED esaeleR/deefpilS 650 R/FStisopeD 520 TISOPED tnirppilS 550 PILStnuocsiD 820 –% erauqS 480 XX
edomyalpsiD 912 EDOMPSID yriuqnikcotS 900 QNIKTSffO/nOyalpsiD 021 FFO/NOPSID erotS 031 EROTS
ni-taE 821 NI-TAE tnemtrapedbuS 331 nnTPEDBUS)erutuf(tuo/nitnE 501 TNE rebmuntnemtrapedbuS 431 #TPDSdioV/tcerrocrorrE 430 DIOV noitutitsbuS 111 .TSBUS
ecirptinutsriF 960 @ts1 latotbuS 570 LATOTBUSULPtalF 360 ULP nnn rebmunelbaT 850 #LBT
noitisopemoH 812 EMOH refsnartelbaT 410 SNARTLBTnoBesuoH 411 NOBESUOH tuo-ekaT 921 TUO-EKAT
psiDomeM-J 702 OMEMJ tfihssutatsxaT 750 S/TnoBnetteK 311 NETTEK/X latotbustnuomaelbaxaT 770 TSAT
tsiL 631 TSIL tpmexexaT 260 TPMEXErebmuntsiL 731 #TSIL tnirptxeT 110 TRP
naoL 910 NAOL llacertxeT 010 RAHCyekdesunutuokcoL 000 PON rezeerhT o 1022100 000
egnahcaideM 811 GHCAIDEM rezowT o 1021100 00tfihsuneM 460 UNEM piT 510 PIT
latotbusesidnahcreM 080 TSDM noitadilaV 730 DLVsuniM 720 – TAV 640 TAV
noitacilpitluM 280 X edomZ/X 221 EDOMZ/XecnalabweN 600 BN yekciremuN 102n000 01="0",9~1=n
kcehcweN 190 KHCWEN raelC 202kcehcdlO/weN 390 DLO/WEN pikS/epacsE 112tpiecerlamroN 610 TCRMRN seY 212
elasoN 240 SN oN 312dda-noN 040 # worratfeL 412
elasoN/dda-noN 140 SN/# worrathgiR 512kcehcdlO 290 KHCDLO worrapU 612
nepO 760 NEPO worranwoD 7122nepO 860 2NEPO psiDesreveR 602 PSDESREVER
kcehCnepO 711 KHCNEPO puegaP 122 PUEGAPrebmunrotarepO 870 #EPO nwodegaP 022 NWODEGAP
teser/daerrotarepO 370 Z/XEPO
32
Application System
ESC/SKIPC
7
4
1
0
X
8
5
2
00YES
NO
COVERS 9
6
3
•
9
8
7
6
5
4
3
2
1
18
17
16
15
14
13
12
11
10
27
26
25
24
23
22
21
20
19
36
35
34
33
32
31
30
29
28
45
44
43
42
41
40
39
38
37
54
53
52
51
50
49
48
47
46
63
62
61
60
59
58
57
56
55
72
71
70
69
68
67
66
65
64
81
80
79
78
77
76
75
74
73
90
89
88
87
86
85
84
83
82
99
98
97
96
95
94
93
92
91
108
107
106
105
104
103
102
101
100
DISPON/OFF
REG.MODE
X/ZMODE
PGM.MODE
NEW/OLDCHK
ADDCHK
SEPCHK
HOUSEBON
SEATNo.
CLK#1
CLK#5
CLK#4
CLK#3
CLK#2
RC PD
VAT
%--
SUBST.
CH
CR
CHK
NB
VOID CANCEL
GUESTRECEIPT
TABLETRANS
MENUSHIFT
CASH AMTTEND
#/NS
HOME
PAGEUP
PAGEDOWN
SUB TOTAL
2-1-4. Keyboard layout
Normally, the keyboard is assigned functions which are required for registration oftransactions. The keyboard is also used for character input when entering descriptors ornames during programming.The QT-2000 automatically switches the keyboard to its character input function when itdetermines that character input is required for the operation sequence you are performing.This means that you can input characters without having to worry about manually changingthe keyboard input mode.
The function key layout is fully programmable to meet the specific needs of each terminal.The actual programming of key layouts can be performed in the PGM4 mode, andprogrammed data is written onto the key conversion table (file 074).The allocation can also be programmed when programming each function file forprogramming function keys such as finalize keys, transaction keys, department keys, andtouch PLU keys.
Standard function key layout
33QT-2000 Reference Manual
Â
Á
À
Ä
1
Q
A
Z
â
á
à
ä
!
q
a
z
Ô
Ó
Ò
Ö
2
W
S
X
ô
ó
ò
ö
@
w
s
x
Û
Ú
Ù
Ü
3
E
D
C
û
ú
ù
ü
#
e
d
c
Î
Í
Ì
Ï
4
R
F
V
Ê
É
È
Ë
5
T
G
B
ê
é
è
ë
%
t
g
b
Ç
Å
Æ
Ñ
6
Y
H
N
ç
å
æ
ñ
^
y
h
n
Ã
Y
Õ
7
U
J
M
ã
y
õ
&
u
j
m
Ø
ı
<<
8
I
K
,
ø
ÿ
¢
*
i
k
<
£
ª
>>
9
O
L
.
¬
¤
(
o
l
>
º
0
P
;
/
'
)
p
:
?
ƒ
ß
-
[
'
\
_
_
{
"
¿
¡
±
=
]
`
•
+
}
~
¥
˜˜
SHIFT INS DEL DBL
ESC/SKIP
PAGEUP
PAGEDOWN
C
7
4
1
0
8
5
2
A
HOME
NO
YES
9
6
3
B
#-2
#-1
CAP
î
í
ì
ï
$
r
f
v
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
**
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
FOR ALL DEVICES
R/J ONLY
INSERT
DELETE
DOUBLE LETTER
CAPITAL LETTER
small letter
R J SLIP KP REAR
R J SLIP KP REAR
→ A_BAB_
→ABC AC_
INS
DEL
DBL
CAP
SHIFT
Aa
Aa
Aa
→
→
→
A
A
a
**
Alphanumeric key layout
2-1-5. Mode control
With the QT-2000, each clerk can be programmed to enable or disable operations in thefollowing modes:
– RF mode– REG– mode– REG mode– X/Z mode– Program 1 ~ 7 mode– Manager mode– In-line X/Z mode– Infrared modeAlso, each clerk can be programmed to enable or disable operations of every function key.Though the QT-2000 has no REG 2 mode, on the page 64 in the Clerk Control functionchapter, the manager control procedure is described.
Arrangement execution mode programmed in the arrangement key ignores the modecontrol program by the clerk.
Please note that if a clerk want to operate an arrangement, he/she should allow to operatearrangement function.
34
Application System
Prompt message Meaning
Data cannot be printed out.
Do you want to display?
Do you want to clear data?
Cancel OK?
Please wait.
Item Consolidation Mode.
Non Consolidation Mode.
REG Mode
REFUND Mode
REG– Mode
REG2 Mode
Training
Please Sign on.
Enter Check/Table Number.
Enter Table Number.
Enter Number of covers.
Enter Seat Number
Perform Slip Printing
Issue Guest Receipt.
Perform Validation Printing.
Perform Check Printing.
Perform Check Endorsement.
Operation Code?
The terminal losts system con-
figuration. Execute reconfigu-
ration procedure as soon as
possible. OK ?
This procedure stops system
maximum 60 sec.
OK ?
Request to check the data which cannot be printedout.Confirmation to reset displayed report.Confirmation of all void operation.Please wait. ECR now processing.In the item consolidation mode.Not in the item consolidation mode.Mode change : REG modeMode change : RF modeMode change : REG– modeMode change : REG 2 modeTraining operatorSign offCHK# compulsoryTBL# compulsoryCovers compulsorySeat# compulsorySlip compulsoryGUEST RCT compulsoryVLD compulsoryCHK-PRT compulsoryCHK-END compulsorySecret No entry for REG 2 mode.
Requirement for system re-configuration.
Alert before flash memory clear.
2-1-6. Operation prompt and error messages
The QT-2000 displays or prints messages to indicate the status of the terminal beingoperated or programmed. These messages help to determine the status of the terminal orthe required subsequent action.
2-1-6-1. Operation promptAll prompt messages, together with descriptors and symbol characters for printing onreceipts, slips or reports are contained in the list below. These messages cannot be added,modified or deleted.
35QT-2000 Reference Manual
egassemtpmorP gninaeM
ekatsimrotarepO rorrenoitarepO
edoMgnorW100E )rorreedomnepO(gnikcartkcehC
rotarepognorW300E gnikcartKHCnikrelcrorrE/krelcrorrE
yromemtneiciffusnI500E revonoitacollayromeM
rewardehtesolC110E yroslupmocrewarD
llorlanruojegnahC210E dneraenrepaplanruoJ
llortpieceregnahC310E dneraenrepapredro/tpieceR
edomGERotkcabegnahC610E edomFRninoitarepolarulptibihorP
rebmunLBT/kcehCretnE710E yroslupmoc#kcehC
.oNelbaTretnE810E yroslupmoc#elbaT
srevocforebmuNretnE910E yroslupmocrevoC
rebmuntaeSretnE020E yroslupmocrebmuntaeS
trohsgninnurkcotS320EdemmargorpstiwolebspordmetiynanehwmralA
.noitartsigergnirudytitnauqkcotsmuminim
elbaliavasikcotsoN420EnoitartsigerarofeulavkcotslautcanehwrorrE
.eulavevitagenasismeti
.RREyroslupmocnwodyatS620E.)s(metIretnE
yroslupmocnwodyatS
.llufreffublecnaC720EnoitcasnartehtezilanifesaelP
llufreffubdiovllA
elbissopsinoitartsigeroN920Erednetehtnierauoyelihw
.noitarepo
rednetlaitraptslihwnoitartsigerdetpmettA.enodgniebsinoitarepo
noitazilaniFerofebyekTSsserP130E yroslupmocTS
tnuomaderednetretnE330E yroslupmocrednettnuomA
.timilehtsdeecxetnuomaegnahC530E .timilehtsdeecxetnuomaegnahC
.rewardehtmorfyenomevomeR630EdemmargorpehtdeecxerewardehtfostnetnoC
.noitcnuflenitneS—timilrevOnoitatimiLtnuomArotigiD730E rorreO.L.A.H,.L.D.H
noitaralceDyenoMmrofreP830E yroslupmocnoitaralcedyenoM
tpieceRtseuGeussI040E yroslupmoctpiecertseuG
noitadilaVtnirP140E yroslupmocnoitadilaV
yrterdnarepaPDLVtresnI240E .detresnisirepaponnehwmralA
DLVkcehcrorepapdeDLVevomeR340Erosnes
egatsnoitadilavehtnitfelsirepapehtnehwmralA.retnirpehtfo
euqehCtnirP440E yroslupmocTRP-KHC
tnemesrodnE-kcehCtnirP540E yroslupmocDNE-KHC
esaelP.lluFreffuBGER640E.BNroezilaniF
llufreffubnoitartsigeR
llibtnirP740E yroslupmocpilS
.yrterdnarepaPpilStresnI840E .pilSehtnidetresnisirepaponnehwmralA
llufyromemKCEHC940E dneraen/llufxednignikcartKHC
.lluFyromemliateD050E dneraen/llufyromemgnikcartKHC
.deipuccosi.oNLBT/KHC150EotyekkcehCweNehtesuotedamsitpmettA
ydaerlasitahtrebmunagnisukcehcwenanepo.yromemgnikcartkcehcgnitsixenarofdesu
.ysubsi.oNLBT/KHC250EehttsllihwrebmunkcehcemasehtesuottpmettA
rehtoehtnidesugniebsirebmundeificeps.lanimret
2-1-6-2. Error messagesError messages are displayed to indicate that an error has occurred and a compulsoryoperation must be performed. All error messages cannot be added, modified or deleted.
36
Application System
egassemtpmorP gninaeM
.denepotonsi.oNLBT/KHC350E dnuofton#KHC
egnaR.oNLBT/KHCfotuO450E revoegnar#KHC
.llufegnarerotS650E .egnarnideipccoera#kcehcllA
.liatednistsixemetioN750E .liatednidnuofebtonnactaepeRdnuoR
.metiyrtnetsopretnE850E .liatednistsixemetiyrtnEtsoP
.yektuo-ekaTroni-taEsserP950E .yektuo-ekaTroni-taEsserP
**********.enilfforetnirP060E
".enilfforetnirP **** roDIlacigolRCEsnaem".4PK~1PK
**********rorreretnirP160E
".denwodretnirP **** roDIlacigolRCEsnaem".4PK~1PK
**********rorreretnirP160E
tnirpotyrteR:SEYneercsehtnowohS:ON
ataddracsiD:CSE
**********dnerepapretnirP260E
"dne/dne-raenrepaP **** DIlacigolRCEsnaem".4PK~1PKro
**********dnerepapretnirP260E
tnirpotyrteR:SEYneercsehtnowohS:ON
ataddracsiD:CSE
llufreffubretnirP460EtnirpotyrteR:SEY
neercsehtnowohS:ONataddracsiD:CSE
edisrednestallufreffubtnirP
tonsiPK.nwodretsaMPK760E.pukcabehtrofelbaliava
tnirpotyrteR:SEYneercsehtnowohS:ON
ataddracsiD:CSE
.delbasidsignitnirpPK
**********morfdevomersiretsaMPK860E
.metsys
.metsysehtmorfdevomersiretsamPK" **** .DIlacigolRCEsnaem"
**********.nwodretsaMretnirPnehctiK960E
?metsysmorftievomeRroyrteR.noitcennocrofyrteR:SEY.metsysmorftievomeR:ON
nwodretsamlortnocPK" **** .DIlacigolRCEsnaem"
**********.noitcafotuolanimreT070E
.tnirptonnaC
retnirpsahhcihwRCEtegrattanwoD" **** .DIlacigolRCEsnaem"
**********retnirplanimrettegraT170E
.llufFBtnirpotyrteR:SEY
neercsehtnowohS:ONataddracsiD:CSE
retnirpsahhcihwRCEtegrattallufreffubretnirP" **** .DIlacigolRCEsnaem"
**********lanimretretnirptegraT270E
?yrteR.ysubsi
retnirpsahhcihwRCEtegrattaysuB" **** .DIlacigolRCEsnaem"
**********ebtonyamredro/tpiecerruoY370E
.deussi
retnirpsahhcihwRCEtatuoemiT" **** .DIlacigolRCEsnaem"
37QT-2000 Reference Manual
egassemtpmorP gninaeM
**********ebtonyamredro/tpiecerruoY370E
.deussitnirpotyrteR:SEY
neercsehtnowohS:ONataddracsiD:CSE
retnirpsahhcihwRCEtatuoemiT" **** .DIlacigolRCEsnaem"
.ecnalaBevitageN570E.dezilanifebtonnaC
nahtsselsiecnalabnehwnoitazilanifdetpmettA.orez
lluFyromeMlanruoJ080E.elifomem-JraelcesaelP
llufomem-J
omem-JnidnuoftonataD180E .yromemlanruojnidnuofebtonnacataD
*****ataDlagellI*****280E atadomem-JlagellI
.elifomem-JetaerctonnaC380E.yromemhsalFkcehC
.detaercebtonnacelifomem-J
-adilosnoCnitsixeataD580E.aeranoit
.aeranoitadilosnocnistsixeataD
**********retsaMgnikcarTLBT/kcehC501E
tievomeRroyrteR.nwod?metsysmorf
.noitcennocrofyrteR:SEY
.metsysmorftievomeR:ON
nwodretsamKHC" **** .DIlacigolRCEsnaem"
**********pukcaBgnikcarTLBT/kcehC601E
tievomeRroyrteR.nwodretsam?metsysmorf
.noitcennocrofyrteR:SEY
.metsysmorftievomeR:ON
nwodMBKHC" **** .DIlacigolRCEsnaem"
**********retsampukcaB&retsaMhtoB701E
rognikcartLBT/KHC.nwodtonsitpurretnikrelC
.elbaliava
nwodMB/MKHC" **** .DIlacigolRCEsnaem"
**********devomersiretsaMLBT/KHC801E
.metsysmorf
metsysmorfffotiekatnehtnwodretsaM" **** .DIlacigolRCEsnaem"
**********siretsampukcaBLBT/KHC901E
.metsysmorfdevomer
metsysmorfffotiekatnehtnwodretsampukcaB" **** .DIlacigolRCEsnaem"
neewtebhctamsimatadKHC011E.retsampukcaB&retsaM
.derruccosahhctamsimataD
naoLropukciPfoelddiM031E.yeKlecnaCsserP
pugnikcipgniruD
>ypoClliB<foelddiM131EyeklecnaCsserP
ypoclliBgniruD
-taralceDyenoMfoelddiM231EyeklecnaCsserP.noi
noitaralcedyenoMgniruD
>egnahCaideM<foelddiM331EyeklecnaCsserP
GHCaideMgniruD
refsnarTkrelCfoelddiM431EyeklecnaCsserP
snarTKLCgniruD
>kcehCetarapeS<foelddiM631EyekCSEsserP
KHCPESgniruD
38
Application System
egassemtpmorP gninaeM
.detadilosnocerasmetI831EdnaedomyalpsidegnahC.noitarepoDIOVmrofrep
gniretnefoesuacebdetibihorpsinoitarepodioV.ytitnauq
evitagenebotdewollatoN931E.yeknopuoC/suniMyb
rorreecnalabtiderC
.unemgnorW041E .MGPybdetibihorpsiredlohteehssihT
.rorrexatnystnemegnarrA541E rorrexatnystnemegnarrA
.yrtneeulavtcerrocnI051E MGProfyrtnetcerrocnI
.desserPyektcerrocnI151E .tcerrocnisignikniL
rebmundroceRroeliFMGP251E.tsixEtonseod
drocerhcuson,elifhcusoN
llufyromemhsalF061E llufyromemhsalF
yromeMhsalFniatadpukcaboN161E .yromemhsalFnidepukcabsiatadoN
dnuoFtonsi.oNeeyolopmE461E.eliFeeyolpmEehtni
.eliFeeyolpmEehtnitestonsi.oNeeyolpmE
ni-gnikcolCtonsi.oNeeyolpmE561E .teynoitarepoNI-KCOLCenodtonsaheeyolpmE
deipuccOsi.oNeeyolpmE661EnoitarepoNI-KCOLCenodsahohweeyolpmE
.niagaNI-KCOLCetarepootstpmetta
edocBOJtcerrocnI761EhtiwNI-KCOLCetarepootstpmettaeeyolpmE
.edocBOJtcerrocnifotuosinoitarepOruoY861E
.eludehcS.reganaMllaCesaelP
ecnawollatonniTUO-KCOLCetareposeeyolpmE.emit
.dedeecxEsruoHkroW961E.reganaMllaCesaelP
.krowemitrevO
ehtnisdnimeRtfihSoN071E.eludehcS
.ni-kcolCtonnnacuoY.tfeltfihsytpmeonsierehT
.yrteRdnatuo-kaerBesaelP171EtslihwTUO-KCOLCetarepootstpmettaeeyolpmE
.emitkaerbanisiehs/eh.dedeecxEsruoHkaerB271E .dedeecxeerasruohkaerB
.wonkrowtasieeyolpmesihT371E .kaerbtuohtiwkrowtasieeyolpmE
kaerbagnikatsieeyolpmesihT471E.won
TUO-KAERBenodtonsahohweeyolpmE.NI-KAERBetarepootstpmettanoitarepo
**********silanimretecnadnettA&emiT571E
.nwod
&emiTroflanimretrezilatotretsamehT.nisngiseeyolpmenanehwnwodsiecnadnettA
" **** .DIlacigolRCEsnaem"
.ni-kcolCtonnacuoY671E.tropeReeyolpmEteseresaelP
gnittesertonfoesuacebni-kcolcotelbissopmI.tropeReeyolpmE
ataDecnadnettA&emiT771E.rorrEnoitacinummoC
.reganaMllaCesaelP.rorrenoitacinummocataDecnadnettA&emiT
.llufyromem)1(ELIFCDI081E.atadCDIraelcesaelP
.smetifollufsiyromem)1(ELIFCDI
.llufyromem)2(ELIFCDI181E.atadCDIraelcesaelP
.smetifollufsiyromem)2(ELIFCDI
.llufyromem)3(ELIFCDI281E.atadCDIraelcesaelP
.smetifollufsiyromem)3(ELIFCDI
39QT-2000 Reference Manual
noitpircseD noitacolgnimmargorP
"noitadilosnocmetI"tpieceR erutaeFlareneGni3lortnoCenihcaM;3MGP"tnemtraped,puorgybtroS"tpieceR erutaeFlareneGni3lortnoCenihcaM;3MGP
tpiecerehtnorebmunevitucesnoctnirP erutaeFlareneGni3lortnoCenihcaM;3MGPlanruoj/tpiecerehtnoemit/etadtnirP erutaeFlareneGni3lortnoCenihcaM;3MGP053-PUrofretcarahcelbuodlacitreV erutaeFlareneGni3lortnoCenihcaM;3MGP
pilS/tseuGnoliatedunemteS erutaeFlareneGnilortnoCtnirP;3MGPrebmunULPtnirP erutaeFlareneGnilortnoCtnirP;3MGPlatotdezilaniftnirP erutaeFlareneGnilortnoCtnirP;3MGP
tnuomaelbaxattnirP erutaeFlareneGnilortnoCtnirP;3MGPsutatselbaxattnirP erutaeFlareneGnilortnoCtnirP;3MGP
dlosmetiforebmunlatottnirP erutaeFlareneGnilortnoCtnirP;3MGPrebmunremotsuctnirP erutaeFlareneGnilortnoCtnirP;3MGP
noitazilanifretfadeefenilenO erutaeFlareneGnilortnoCtnirP;3MGP)H21/H42(tamrofemiT erutaeFlareneGnilortnoCtnirP;3MGP
2-1-7-2. Validation print controlThe QT-2000 allows use of the receipt/journal printer (SA-3015) or the slip printer (SP-1200) for validation printing of item registrations, function registrations and sales totals.To perform validation printing, insert the validation paper into the validation slot of thereceipt/journal printer or into the slip printer, and then press the <Validation> key (functioncode 037).The following shows the print format for validation performed using either the receipt/journal printer or the slip printer.
There are three general types of validation printing:1) Finalization validation2) Transaction validation3) Item validation
Finalization validation is performed following finalization operations with finalize keys.When a validation is performed following receipt issuance, the sales total is printed, whilepartial tendering, the tendered amount for the specified medium is printed.
2-1-7. Printing control system
The following describes the control system for printing of receipts, the journal, validation,slips and X/Z reports.
2-1-7-1. Receipt/journal print control during normal registrationNormally, the receipt and journal are printed to reflect the details of a registration as it isperformed, with the receipt being issued with the finalize operation. By using the ReceiptOn/Off key, the receipt issuance status can be turned off to suspend printing and issuanceof receipts when so desired. Pressing the Receipt On/Off key turns the receipt issuancestatus on or off, and when the receipt issuance status is On, the icon “Receipt On” appears.Switching receipt printing Off does not affect printing of the journal.
The following programming can be performed for receipt and journal printing:
40
Application System
Transaction validation is valid for the following function keys:– Received on account, Paid out, Pick up, Loan, Check cashing, Minus, Plus, Discount,
Premium, Void keys
You can program the allowable number of validation printings or multiple validationprinting status for the above listed keys.Also these keys can be programmed as validation compulsory, this means that registrationis not permitted until the validation of the former registration has been performed.
Item validation is performed directly following an item registration listed below.– Departments– Subdepartments– PLUs
You can program the multiple validation printing status and validation compulsory statusfor above items.
2-1-7-3. Slip print controlConnection of an optional receipt/journal printer (SA-3015) or an optional slip printer (SP-1200) to the QT-2000 makes it possible to print transaction details on a slip.To print a slip, insert a slip paper into the printer, and adjust paper position by pressing the<Slip feed/release> key (function code 056) or the <Slip back feed/release> key (functioncode 054) and then press the <Slip batch print> key (function code 055).After printing a slip, the paper is automatically released.If the paper is not released for some reasons, press <Slip feed/release> or <Slip back feed/release> to release the paper.
The followings are the programs to control slip printing format:
2-1-7-4. Endorsement message print controlThe QT-2000 allows printing of endorsement messages on the slip printer (SA-3015 or SP-1200) for check, charge and credit registrations. To perform endorsement messageprinting, insert the paper into the slip printer following finalization using the <Check>,<Charge> or <Credit> key or check cashing transaction using the <Check> key, and pressthe following key:
– Endorsement key (function code 039)
The above tender keys and check cashing key can be programmed for compulsoryendorsement print. The endorsement message contents should be programmed into theendorsement message file (file 033).
41QT-2000 Reference Manual
noitpircseD noitacolgnimmargorP
troperrezilatotdexifehtnosmetI erutaeFlareneGni1lortnoCtropeR;3MGPpiksorezsmetI erutaeFlareneGni2lortnoCtropeR;3MGP
troperylhtnomnometi/dnepsegarevA erutaeFlareneGni2lortnoCtropeR;3MGP)edocmodnar/yromem(redroULP erutaeFlareneGni2lortnoCtropeR;3MGP
troperULPno.oNULPtnirpnoN/tnirP erutaeFlareneGni2lortnoCtropeR;3MGPoitarselaStnirpnoN/tnirP erutaeFlareneGni2lortnoCtropeR;3MGPretnuocZtnirpnoN/tnirP erutaeFlareneGni2lortnoCtropeR;3MGP
rezilatottnuocsidmetItnirpnoN/tnirP erutaeFlareneGni2lortnoCtropeR;3MGPTGtnirP erutaeFlareneGni2lortnoCtropeR;3MGP
2-1-7-5. Check printing print controlThe QT-2000 allows printing check tendered amount in letters and numbers on a checkinserted into the slip printer. To perform check printing, insert the paper into the slip printerfollowing check finalization using the <Check> key or check cashing transaction using the<Check> key, and press the following key:
– Check print key (function code 012)
Check key can be programmed for compulsory check print. The check printing format iscontrolled by the check print message file (file 041).
2-1-7-6. X/Z report print controlThe QT-2000 can output a report in the read (X) or reset (Z) mode that contains the totaldata in each file. The following shows the programming for X/Z print controls:
42
Application System
2-2. General description of individual function keys
This section describes individual function key that can be assigned to the keys on thekeyboard of QT-2000.
2-2-1. System keys
The system key consist on a non-programmable function key.The following system keys are available.
1) Numeric keys (0, 1 ~ 9)These keys are used for inputting numerical data such as PLU codes, amounts, quantities,etc. These keys must be allocated on the keyboard.
2) Clear keyThis key is used for clearing numerical values after they have been input, and after incorrectfunction keys have been pressed. This key also can be used to clear errors. This key mustbe allocated on the keyboard.
3) Home position keyThis key is used for returning cursor to the home position.
4) Left, right, up, down arrow keysThese keys are used for moving the cursor.
5) Yes keyThis key is used for consenting the selection and proceeding steps.
6) No keyThis key is used for cancelling the selection and proceeding steps.
7) Mode selection keys (REG MODE, X/Z MODE, PGM MODE)REG MODE key; This key is used for selecting the REG, REF, REG– modes.X/Z MODE key; This key is used for selecting the X/Z, MGR, In-line X/Z modes(collection/consolidation), Auto PGM (program upload/download), Infrared (Ir portcommunication).PGM MODE key: This key is used for selecting modes the PGM1, PGM2, PGM3, PGM4,PGM5, PGM6, PGM7 modes.
8) ESC/SKIP keyThis key is used for terminating a programming sequence, X/Z sequence, and return theprimary status. This key is also used to terminate a report being issued in PGM, X, and Zmode.
9) Reverse display keyThis key is used for changing the LCD as a blue line on white ground/white line on blueground.
10) Page up keyThis key is used for turning the window forwards.
11) Page down key
This key is used for turning the window backwards.
43QT-2000 Reference Manual
2-2-2. Finalize keys
This section covers the general description of each finalize key, with its respective options.Finalize keys have programmable functions which may be used as required.
1) Tender keyThis key is used for finalizing transactions. Up to four media in drawer totalizers arereserved in the fixed totalizer file, and Cash key is linked to Cash in drawer, Charge keyto Charge in drawer, Check key to Check in drawer and Credit key to Credit in drawer.When this key is pressed, the total amount of the transaction is calculated. Normally, areceipt is issued and the drawer opens at the same time. The total amount is added to theappropriate totalizers and counters, with consecutive numbers being incremented by one.When an amount exceeding the sales amount is received, the change is calculated,displayed and printed on the receipt.This key can also be used in combination with other finalize keys for partial tender and canalso be used to specify the type of media during loan, pick up or media change operation.This key has the following programmable functions:– Key location– Function code (Cash = 001, Charge = 002, Credit = 003, Check = 004)– Sixteen character descriptor– High amount lock out (subtotal/tender)– Change due to high amount lock out– Maximum number of validation print– Compulsory validation status– Restriction (to 00, 25, 50, 75) on the last two digits for amount tendered (cash only)– Compulsory batch slip printing– Compulsory check endorsement (check only)– Compulsory check print (check only)– Prohibit entry of a partial payment– Prohibit the entry of the amount tendered– Amount tendered compulsory– Print VAT breakdown– Check cashing commission (Use an amount/Use a rate)– Validation amount (Print subtotal amount/Print amount tendered)
2) New balance keyThis key is used for adding the latest registered total amount to the previous balance toobtain a new balance.When this key is pressed, the total amount of the transaction is calculated. Normally, areceipt is issued. The total amount is added to the appropriate totalizers and counters, withconsecutive numbers being incremented by one.This key has the following programmable functions:– Key location– Function code (New balance = 006)– Sixteen character descriptor– Maximum number of validation print– Compulsory validation status– Compulsory batch slip printing– Open cash drawer– Print VAT breakdown– Service charge (Use an amount/Use a rate)
44
Application System
2-2-3. Transaction keys
Each of the transaction keys have programmable functions which may be used as required.Programmable functions that are common to all transaction keys are listed below.– Key location– Sixteen character descriptorThe general description of each transaction key, with individual options, is outlined on thefollowing pages.
1) Price inquiry key (Function code 008)This key is used to confirm the price and descriptors of PLU without registering.
2) Stock inquiry key (Function code 009)This key is used to confirm the stock quantity and descriptors of PLU without registering.
3) Text recall key (Function code 010)This key is used to recall characters. In addition to the common programming, this key hasthe following options:– Allow mode change after pressing this key as first transaction.– Print/Non print this registration on post receipt/slip/guest receipt.– Record No. designation of the Text recall file.– Printing color on kitchen printer (black/red).– Output order printer selection.
4) Text print key (Function code 011)This key is used to recall characters. In addition to the common programming, this key hasthe following options:– Allow mode change after pressing this key as first transaction.– Print/Non print this registration on post receipt/slip/guest receipt.– Record No. designation of the Text recall file.– Printing color on kitchen printer (black/red)– Output order printer selection.
5) Check print key (Function code 012)This key is used to print the check on the slip printer (incl. SA-3015). Pressing this keyallows the selection from the following list to print on a check.1. Check amount in Arabic numerals (normal size/double size)2. Date (normal size/double size)3. Check print messageThis item noted above can be arranged into a check print format according to the needsof the store. Check printing using this key is valid only for the following operation of theCheck key. In addition to the common programming, this key has the following option:– Number of back feed lines before check printing.
6) Clerk transfer key (Function code 013)This key is used to transfer opened checks to another clerk.In addition to the common programming, this key has the following option:– Assigning clerk number (Use memory number/Use clerk secret number)
7) Table transfer key (Function code 014)This key is used to transfer the contents of a check to another check. In addition to the common programming, this key has the following options:– Allow to add in checks while table transferring– Transfer the customer number
45QT-2000 Reference Manual
8) Tip key (Function code 015)This key is used to register tips. In addition to the common programming, this key has thefollowing options:– High digit lock out– Multiple validation
9) Normal receipt key (Function code 016)
This key is used to change the order status from Bon to normal.
10) Loan key (Function code 019)This key inputs the amount of money provided for making change. This operation affectsmedia totals, rather than sales totals.Loans are made for all types of money which can be specified by finalize keys. In additionto the common programming, this key has the following options:– High amount lock out– Compulsory validation– Maximum number of printing validation
11) Received on account key (Function code 020)This key is used to register amounts received for purposes other than sales transactions.This transaction affects media totals, rather than sales totals. In addition to the commonprogramming, this key has the following options:– High amount lock out– Compulsory validation– Maximum number of printing validation
12) Paid out key (Function code 021)
This key is used to register amounts of paid outs from the register. This transaction affectsmedia totals, rather than sales totals. In addition to the common programming, this key hasthe following options:– High amount lock out– Compulsory validation– Maximum number of printing validation
13) Pick up key (Function code 022)When sales receipts are removed from the drawer or when the amount in-drawer exceedsthe limit value (sentinel function), the manager performs a pick up operation. This key isused for this function. This operation affects media totals, rather than sales totals.Pick ups are made for all types of money which can be specified by finalize keys. Inaddition to the common programming, this key has the following options:– High amount lock out– Compulsory validation– Maximum number of printing validation
14) Coupon key (Function code 023)This key is used for registering coupons. This operation affects the coupon amount in thecoupon totalizers. The registered coupon amounts is not deducted from the department,PLU or gross totalizers, but from the net totalizers only. (GROSS specification)In addition to the common programming, this key has the following options:– Multiple validation– Taxable status– Allow credit balance– Allow key operation after Subtotal– Allow key operation after Item registration– High digit lock out– Commission status
46
Application System
15) Deposit key (Function code 025)This key is used to register deposits. In addition to the common programming, this key hasthe following options:– Key attribution (Deposit +/Deposit –)– Maximum number of validation– Compulsory validation– Open cash drawer– Media definition (Cash/Charge/Check/Credit)– High amount lock out
16) Minus key (Function code 027)This key is used to register subtraction. This operation affects the subtraction amount inthe minus key totalizers. The registered amounts is not deducted from the department, PLUor gross totalizers, but from the net totalizers only. (GROSS specification)In addition to the common programming, this key has the following options:– Multiple validation– Taxable status– Allow credit balance– Allow key operation after Subtotal– Allow key operation after Item registration– High digit lock out– Commission status
17) Discount key (Function code 028)This key applies a preset % or manual input % to obtain the discount amount for the lastregistered item or subtotal. In addition to the common programming, this key has thefollowing options:– Discount rate– Multiple validation– Taxable status– Allow manual rate override– Allow key operation after Subtotal– Allow key operation after Item registration– Result rounding (Round off/Cut off/Round up)– Commission status
18) Plus key (Function code 029)This key is used for registering surcharge. This operation affects the surcharge amount inthe plus key totalizers. The registered amounts is not added to the department, PLU or grosstotalizers, but from the net totalizers only. (GROSS specification)In addition to the common programming, this key has the following options:– Multiple validation– Taxable status– Allow key operation after Subtotal– Allow key operation after Item registration– High digit lock out– Commission status
47QT-2000 Reference Manual
19) Premium key (Function code 030)This key applies a preset % or manual input % to obtain the premium amount for the lastregistered item or subtotal. In addition to the common programming, this key has thefollowing options:– Premium rate– Multiple validation– Taxable status– Allow manual rate override– Allow key operation after Subtotal– Allow key operation after Item registration– Result rounding (Round off/Cut off/Round up)– Commission status
20) Refund key (Function code 033)This key declares next input for a return money.
21) Error correct/Void key (Function code 034)
This key is used to correct the last registered item, discount, premium, amount tendered,etc. This key also invalidates proceeding data registered for departments, PLUs or setmenus only.In addition to the common programming, this key has the following option:– Select void reason
22) Coupon 2 key (Function code 036)This key is used to register coupons. This operation affects the coupon amount in thecoupon 2 totalizers. The registered coupon amounts is deducted from the department, PLUor gross totalizers and the net totalizers.
23) Validation key (Function code 037)This key validates item or transaction amounts on slips. Validation can be made compul-sory for certain function keys. Multiple validation can be prohibited for certain functionkeys.
24) Receipt key (Function code 038)This key issues a receipt for the last transaction (post-finalization receipt) when the originalreceipt is not issued. This key also issues a guest receipt.In addition to the common programming, this key has the following options:– Maximum number of post receipts– Post/Guest receipt format (Print out/Display)– Print current time on guest receipt– Reset the finalized check– Line numbers of the guest bottom message
25) Check endorsement key (Function code 039)This key is used to print a preset check endorsement message, charge endorsementmessage using the slip printer.In addition to the common programming, this key has the following option:– Line number of auto back feed before printing
26) Non add key (Function code 040)This key prints reference numbers (personal check number, card number etc.) In additionto the common programming, this key has the following options:– Allow mode change after non add registration as first transaction– Order character record number– Printing color on kitchen printer (black/red)– Selection of order printer number (1 ~ 7)
48
Application System
27) Non add/No sale key (Function code 041)This key prints reference numbers (personal check number, card number etc.)This key also opens the drawer between transaction.In addition to the common programming, this key has the following options:– Allow mode change after non add registration as first transaction– Order character record number– Printing color on kitchen printer (black/red)– Selection of order printer number (1 ~ 8)
28) No sale key (Function code 042)This key opens the drawer between transaction.
29) Customer number key (Function code 043)This key registers the number of customers.In addition to the common programming, this key has the following option:– Prohibit replacement/allow replacement/Add enter value
30) Arrangement key (Function code 044)This key is used to activate an arrangement program programmed in the arrangement file.Any operation that can be performed from the keyboard, as well as mode, can beprogrammed in an arrangement program, and can be performed merely by pressing thiskey. In addition, one numeric entry can be included in an arrangement program. In thiscase, input the number and press this key.The mode control function of this key can be programmed for all modes except for the OFFmode.
31) Currency exchange key (Function code 045)
This key converts foreign currency to local currency or vice versa using the exchange ratepreset for the key and displays the result.This key is used for conversions of a home currency subtotal or merchandise subtotal toequivalent of another country's currency.This key is also used for conversion of another country's currency payment to theequivalent of the home currency.This key is used for conversions of another country's currency to the equivalent of the homecurrency.In addition to the common programming, this key has the following options:– Amount symbol definition– Foreign currency totalizer definition– Result rounding (Round off/Cut off/Round up)– Monetary mode– Monetary symbols (Decimal, Separator)– Drawer assignment (1, 2)
32) VAT key (Function code 046)This key is used to print VAT breakdowns.
33) Bill copy key (Function code 047)This key is used to issue bill copy.
34) PLU key (Function code 048)This key is used to enter PLU numbers.
35) Price key (Function code 049)This key is used in the following transactions to enter a unit price.– Department registration using the Department number key– Subdepartment registration using the Subdepartment number key– Open PLU registrationIn case of the department or subdepartment registration mentioned above, the Price key ispressed after entering the unit price to override a unit price preset to the department orsubdepartment. If the preset price is to be registered as it is, simply press the Price key.
49QT-2000 Reference Manual
36) Department key (Function code 051)This key is used to register items for a department.In addition to the common programming, department key has the following options:– Single item, Bon, taxable, commission, hash status– Multiple validation– Zero unit price, negative price– H.A.L.O. (High amount lock out), L.D.L. (Low digit limitation)– Link group
37) Slip back feed/Release key (Function code 054)This key is used to back feed slips inserted into the slip printer. This is done by specifyingthe number of feed lines. This key is also used to release the slip paper holder if numbersare not entered.
38) Slip print key (Function code 055)This key is used to execute a slip batch printing on the slip printer. Pressing this key printsthe sales details. Actual printing is performed following receipt issuance.In addition to the common programming, this key has the following options:– Compulsory slip printing– Print time. (effective under compulsory only)– Clear finalized check.
39) Slip Feed/Release key (Function code 056)This key is used to feed slips inserted into the slip printer. This is done by specifying thenumber of feed lines. This key is also used to release the slip paper holder if numbers arenot entered.
40) Tax status shift key (Function code 057)This key activates tax table which is specified by the tax status programmed for this key.The tax status is programmed for the Departments, Subdepartments, PLUs, Minus, Plus,Discount and Premium keys. Pressing this key during registration converts taxable itemto non taxable, and non taxable item to taxable. In addition to the common programming,this key has the following option:– Tax status
41) Table number key (Function code 058)This key is used to input table numbers.
42) Tax exempt key (Function code 062)This key is used to change taxable amounts to non-taxable amounts. This key works addingon a tax system only. In addition to the common programming, this key has the followingoption:– Tax status
43) Flat PLU key (Function code 063)This key is used to register items to Flat PLU.In addition to the common programming, flat PLU key has the following options:– Single item, Bon, taxable, commission, hash status– Condiment/preparation status, double bon status– Multiple validation– Zero unit price, negative price– L.D.L (Low digit limitation)– Random code, Unit/Minimum stock– Set menu/Order character/Pulldown group link– Subdepartment link, department link, group link
44) Menu shift key (Function code 064)This key is used to shift Flat PLU key to the n-th (n=1 ~ 8) menu.In addition to the common programming, this key has the following option:Menu sheet number to shift
50
Application System
45) Open key (Function code 067)This key is used to release the maximum amount limit or low digit limit for an amountwhich exceeds the limit.
46) Open 2 key (Function code 068)This key is used to suspend the compulsory specifications listed below.In addition to the common programming, this key has the following options:– Release customer number compulsory– Release table number compulsory– Release check number compulsory– Release credit balance (ST < or = 0) error– Release guest receipt compulsory– Release validation compulsory– Release check endorsement compulsory– Release check print compulsory– Release slip auto batch print compulsory– Release slip manual batch print compulsory– Release seat number compulsory
47) First unit price key (Function code 069)This key is used to register a specific item at the first unit price.
48) Second unit price key (Function code 070)This key is used to register a specific item at the second unit price.
49) Clerk number key (Function code 072)This key is used to assign a clerk’s secret number.In addition to the common programming, this key has the following options:– Target LCD number definition– Clerk secret number (Clerk keys for all clerks)
50) Operator X/Z key (Function code 073)This key is used to issue a clerk’s individual X/Z report.In addition to the common programming, this key has the following options:– Issue stand-alone report/Issue consolidation report– Display report/Print report
51) Subtotal key (Function code 075)This key is used to obtain subtotal amount with add-on tax and previous balance.In addition to the common programming, this key has the following options:– Multiple validation– Include add-on tax– Print when key is pressed
52) Receipt On/Off key (Function code 076)This key is used to change the status "Receipt issue" or "No receipt."
53) Taxable amount subtotal key (Function code 077)This key is used to obtain taxable amount subtotal. In addition to the common program-ming, this key has the following option:– Tax status
54) Operator number key (Function code 078)This key is used to enter a clerk number during clerk transfer.
51QT-2000 Reference Manual
55) Merchandise subtotal key (Function code 080)This key is used to obtain subtotal excluding the add-on tax amount and the previousbalance. This function can be used to calculate a premium or discount for subtotals, or onthe additional sales amount.In addition to the common programming, this key has the following options:– Multiple validation– Print when key is pressed.
56) Multiplication key (Function code 082)This key is used to enter quantities for multiplication. The maximum quantity that can beregistered with this key is 4 integer and 3 decimals. An error occurs if the result exceeds8 digits, including the minus sign.The date and time can be displayed by pressing this key. The date and time are cleared bypressing the Clear key.In addition to the common programming, this key has the following options:– Rounding the result– Entering order (quantity × @ or @ × quantity)
57) Quantity/For key (Function code 083)This key provides the same functions as the Multiplication key. In addition, this key alsohas a split pricing function. The function is used to calculate the price per unit for particularitems, which are sold in bulk in order to obtain the total amount for the number of unitspurchased.In addition to the common programming, this key has the following option:– Rounding the result
58) Square key (Function code 084)
This key provides the same functions as the Multiplication key. In addition, this key alsohas a square multiplication function.In addition to the common programming, this key has the following option:– Rounding the result
59) Selective item subtotal key (Function code 085)This key is used to obtain the selective item 1/2 of the subtotal amount. In addition to thecommon programming, this key has the following option:– Selective item status 1/2
60) Cube key (Function code 090)This key provides the same functions as the Multiplication key. In addition, this key alsohas a cube multiplication function.In addition to the common programming, this key has the following option:– Rounding the result
61) New check key (Function code 091)This key is used in a check tracking system to input a new check number in order to opena new check under that number.
62) Old check key (Function code 092)This key is used in a check tracking system to input the number of an existing check(previously created by the New check key) whose details are stored in the check trackingmemory. Existing checks are reopened to perform further registration or to finalize them.
63) New/Old check key (Function code 093)This key is used in a check tracking system to input check numbers in order to open newchecks and to reopen existing checks. When the clerk inputs a check number, the registerchecks to see if that number already exists in the check tracking memory. If there is nomatching number in the memory, a new check is opened under the input number. If thecheck number input matches a number already stored in the memory, that check isreopened for further registration or finalization.
(future)
52
Application System
64) Add check key (Function code 094)This key is used in a check tracking system to combine the details of more than one checkinto a single check.
65) Separate check key (Function code 095)This key is used in a check tracking system to separate selected items from one check toanother check.
66) Clock-in/out key (Function code 108)This key is used to register the time when employees start/finish their job.
67) Break-in/out key (Function code 109)
This key is used to register the starting/finishing time when employees have a recess.
69) Substitution key (Function code 111)Replaces group PLU with a PLU not preset in the set menu.
70) Ketten Bon key (Function code 113)This key is used to enter quantities for multiplication. Multiplication by this key issuessingular order prints.In addition to the common programming, this key has the following options:– Result rounding– Entering order (quantity × @ or @ × quantity)
71) House Bon key (Function code 114)This key is used to register items for in-store use.In addition to the common programming, this key has the following option:– Status/stay down
72) Post Entry key (Function code 115)This key is used to indicate the reserved item of Set Menu and register it as a fixed itemlater on.– Enter Post Entry
Press this key while the window is opened, the key descriptor appears on the screen andit is registered as a reserved item.
– Fix Post EntryAfter finishing the Set Menu registration, move the cursor on to the reserved item, pressthis key again, then the appropriate window will be opened to fix it.
73) Round Repeat key (Function code 116)This key is used to register the same items which were ordered just before.
74) Open check key (Function code 117)This key is used to issue an open check report of an assigned clerk.In addition to the common programming, this key has the following option:– Print/Display open check
75) Media change key (Function code 118)This key is used to change media in drawer amounts. Pressing this key enters media changeoperation.
76) Seat number key (Function code 119)This key is used to enter and print seat number.
77) Display on/off key (Function code 120)This key is used to turn on/off the QT-2000 terminal.
78) Eat-in key (Function code 128)This key is used to specify if the customer eats in the restaurant. Before closing a transactionpress this key.
53QT-2000 Reference Manual
79) Take-out key (Function code 129)This key is used to specify if the customer takes out items. Before total a transaction. Pressthis key for the tax exemption.
80) Store key (Function code 130)This key is used for storing the check number of the registered items. Program this key inthe transaction at the drive-through entrance. When this key is pressed, registered item datawill be stored, and then these data will transfer to the youngest check number.
81) Recall key (Function code 131)This key is used for recalling the transferred check number by the store key. When youpress this key, the check number will appear in order of the oldest record.
82) Subdepartment key (Function code 133)
This key is used to register items for the subdepartment.In addition to the common programming, subdepartment key has the following options:– Single item, taxable, commission, hash status– Multiple validation– Zero unit price, negative price– H.A.L.O. (High amount lock out), L.D.L (Low digit limitation)– Link department, link group
83) Subdepartment number key (Function code 134)This key is used to enter subdepartment numbers.
84) Department number key (Function code 135)This key is used to enter department numbers.
85) List key (Function code 136)
This key is used to display menu lists.In addition to the common programming, this key has the following option:– Record No. of the pull-down group
86) List number key (Function code 137)This key is used to designate list number.
87) Journal memory display key (Function code 207)This key is used to display journal on the second display.It is necessary to install the second LCD and assign this display to use as journal memory.
88) Display mode key (Function code 219)This key is used to change display modes (normal mode/item consolidation mode).
89) Cancel key (Function code 236)Invalidates all preceding data registered for departments, PLUs and set menus within atransaction. This key must be pressed before the transaction involving the data to beinvalidated is finalized. It is also effective even after calculation of subtotal amount.
54
Application System
KP KP KP
QT2000QT2000QT2000QT2000
R/JSlip SlipSlip
KPPC
RS-232C
Up to 4 kitchen printers
Up to 4 QT-2000 terminals
KP/M CHK/BM CHK/M KP/BM
R/JPRN (1) PRN (2)
Satellite Satellite
KPMaster
Printbuffer
1
KP
2 3
2-3. Kitchen printer control
This system requires a kitchen printer control master (and backup master) for kitchenprinter control. Up to four printers for printing kitchen orders.
2-3-1. Kitchen printer system configuration
Please refer to page 18 for the system configuration.
The printing processing of the kitchen printer is performed as shown in the figure above.1 A transaction is made at a terminal (satellite/master).2 The terminal sends printing data to the kitchen printer master.3 The kitchen printer master sends data to the appropriate kitchen printer.
55QT-2000 Reference Manual
SW No.12345678
Function
Machine number
Baud rate
Factory settingOFFOFFOFFOFFONONOFFOFF
Machine number setting Baud rate setting
Kitchen printermachine number Baud rate
1234
6001200240048009600
DIP SW No. DIP SW No.1
OFFONOFFON
2OFFOFFONON
3OFFOFFOFFOFF
4OFFOFFOFFOFF
5OFFONOFFONOFF
6OFFOFFONONOFF
7OFFOFFOFFOFFON
8OFFOFFOFFOFFOFF
KP-200 Bottom view
} not used
not used
SW No.12345678
Function
Machine number
Baud rate
Factory settingOFFOFFOFFOFFONONOFFOFF
Machine number setting Baud rate setting
Kitchen printermachine number Baud rate
1234
6001200240048009600
DIP SW No. DIP SW No.1
OFFONOFFON
2OFFOFFONON
3OFFOFFOFFOFF
4OFFOFFOFFOFF
5OFFONOFFONOFF
6OFFOFFONONOFF
7OFFOFFOFFOFFON
8OFFOFFOFFOFFOFF
KP-300 Bottom view
} not used
not used
2-3-2. Kitchen printer control setting
Kitchen printer settings:
As with the former version, the kitchen printer machine number and baud rate must bespecified using the DIP switches on each printer. After changing the DIP switch configu-ration, kitchen printer initialization (power on by pressing the “LF” key) is necessary.
56
Application System
Memory allocation of files required when kitchen printers are connected• Registration buffer (file 036)• Printer buffer (file 035)
The area reserved for the kitchen printer detail buffer should be equal to at least themaximum number of lines in a single transaction plus 100 (for backup).
Other new setting• General machine features
2-3-3. Kitchen printer output control
The following print items are controlled by programming.• 0 to 9 line feed above and below printing• Dashed line print control• Kitchen printer auto cut control (KP-300 only)• Paper near end printing control• Data communication speed• Backup kitchen printer specification• Print color (black/red) control• Output kitchen printer number• Kitchen printer output in training mode• Item amount printing• Alert when KP is down
2-3-4. Kitchen printer backup processes
Kitchen printer error or kitchen printer master errorKitchen printer error:The master terminal detects the kitchen printer abnormality and simultaneously alerts allof the QT-2000 terminals in the system.When the backup kitchen printer is assigned, the kitchen printer cross backup (see the nextsection) is made. In case of no backup kitchen printer is assigned or the backup printer isalso downed, the data will be able to display on the terminal LCD.
Kitchen printer master error:When the satellite terminal detects the kitchen printer master terminal abnormality, youcan choose the options “Retry communication or Remove the master.” on the satellitedisplay. If you select “Remove”, the satellite terminal sends the master down flag to all ofthe QT-2000 terminals in the system.After this operation, the backup master terminal controls kitchen printer(s).
57QT-2000 Reference Manual
Kitchen printer cross backupWhen there is more than one kitchen printer in the system, a setting can be made on themaster to enable kitchen printer cross backup.Cross backup (example):
Kitchen Printer 1 backup → Kitchen Printer 2Kitchen Printer 2 backup → Kitchen Printer 3
Note that kitchen printer backup extends a single level only. If kitchen printer 1 goes downin the above example, kitchen printer 2 performs backup printing. If kitchen printer 2 nowgoes down, kitchen printer 3 does not take over backup printing. Backup printing can,however, be performed manually.
Kitchen printer print sample
1) Order printing (Normal receipt printing with amount)
*Soft Drinks* — Order characterCheck No. 123456 Machine #1 — Check number/Machine IDREG C01 15-12-97 12:34 001234 — Mode/Clerk/Date/Time/Consecutive No.
1 Lemon Tea •1.00 — Order with amount 2 Coffee •2.00
---------------------------------------- — Cut or print dot line
2) Order printing (Single bon/double bon)
*Soft Drinks* — Single BonCheck No. 123456 Machine #1REG C01 15-12-97 12:34 001234
1 Lemon Tea
---------------------------------------- — Cut or print dot line
*Soft Drinks* — Double BonCheck No. 123456 Machine #1REG C01 15-12-97 12:34 001234
2 Coffee
----------------------------------------
*STUB* — Double bon message *Soft Drinks* — Order characterCheck No. 123456 Machine #1 — Check number/Machine IDREG C01 15-12-97 12:34 001234 — Mode/Clerk/Date/Time/Consecutive No.
2 Coffee
----------------------------------------
58
Application System
3) Order printing (Normal receipt printing without amount)
*Soft Drinks* — Single BonCheck No. 123456 Machine #1REG C01 15-12-97 12:34 001234
1 Lemon Tea 2 Coffee 2 Coffee
----------------------------------------
4) Order printing (Set menu/preparation/condiment)
Check No. 123456 Machine #1REG C01 15-12-97 12:34 001234
2 Steak Set — Set menu Medium — Detail item (without quantity) Salad
2 Steak Set — Set menu 1 Medium — Detail item (with quantity) 1 Salad
1 Pizza — Main item Soft — Preparation (without quantity) Cheese — Condiment (without quantity) Tomato
1 Pizza — Main item #123456 — Main item PLU No. 1 Soft — Preparation (with quantity/PLU No.) #00001 1 Cheese — Condiment (with quantity/PLU No.) #00002 1 Tomato
#00003
59QT-2000 Reference Manual
KP KP KP
QT2000QT2000QT2000QT2000
R/JSlip SlipSlip
KPPC
RS-232C
Up to 4 kitchen printers
Up to 4 QT-2000 terminals
KP/M CHK/BM CHK/M KP/BM
R/JPRN (1) PRN (2)
Satellite
MasterBackupmasterCheck
trackingCheck
tracking
14
3
2 5
2-4. Check tracking system
2-4-1. Shared check tracking system
With this shared check tracking system, there is no PC for the master terminal, but a masterand a backup master terminal act shared check tracking master/backup master. Up to 4terminals can be included in the system and check tracking can be performed for multipleterminals connected to in-line. This means that any terminal can be used to recall atemporary closed check for additional registration or finalization.
System configuration
Shared check tracking processing is performed as shown in the figure shown above.1 A shared check operation (such as “new check” or “old check” etc.) is made at a
terminal.2 The terminal sends the check number to the check tracking master and a backup master.3 The master and backup master sends back the check data (if the check number exists)
or opens a new check number.4 A shared check transaction is finalized (by “new balance” or other finalize key).5 The terminal sends the check data to the master and the backup master. And the master/
backup master clears the busy status of the check number.
60
Application System
2-4-2. Shared check tracking requirement
The following programming are required in each terminal before you can perform sharedcheck tracking.• Check tracking index file (file 015)
A minimum one record for satellite, records of number of open checks for master mustbe reserved.
• Check tracking detail file (file 060)The number of records reserved for satellite should be the minimum number of items/functions registered +1 for each check. The number of records reserved for mastershould be to multiply the number of open checks by the number of item/functions percheck +1.The best way to calculate the number of records required for each check for stand-aloneis to multiply the number of open checks by the number of items/functions per check +1when the master goes down.
Warning for memory near end and memory end errorSee the page 234 of this manual (A-5. Error messages).
2-4-3. Data backup when the master goes down
When the system has the backup master for the check tracking system, registered checktracking data are stored both master and backup master automatically.As soon as the system detects master down, the backup master roles as master for the checktracking system.(It is necessary to switch to backup master manually. See the “System down & Recovery”chapter on page 14 of QT-2000 Installation & Down Recovery manual.)
When the system has no backup master for the check tracking system or both master andbackup master become down, no more check tracking operation and clerk interruptoperation can be made.
61QT-2000 Reference Manual
2-5. Other check tracking system control
2-5-1. The timing to clear check detail and index file after finalization
There are two timings to clear detail and index files.
1. The check is cleared after printing finalized data on slip or guest check receipt, or thecheck is also cleared when the new or old check operation is made on the terminalfinalized the transaction.
2. The check is cleared after printing finalized data on slip or guest check receipt, or checkis also cleared when the same finalized check number is assigned in new checkoperation.
This option is set on the page 52 of the programming manual.
2-5-2. Table transfer
This function is used for transferring the contents of a check to another check.There are two cases depends on the status of the transferring check.
1. If the transfer check is not used.The entered check number is overwritten.
2. The check number is already used.Add the contents to the existing contents.
This option is set on the page 118 of the programming manual.
2-5-3. Store and Recall
These functions are used for the driving through purchase.
2-5-3-1 StoreThis function is used for storing the CHK No. of the registered items. The Detail/Index atthe drive-through entrance record the registered items and store it’s CHK No., and thenprint out the temporary receipt. A customer recieve this temporary receipt, and drive up tothe exit with this to receive the ordered item. The stored data transfer to the Check TrackingMaster/Backup Master.
2-5-3-1 RecallThis function is used for recalling the transferred CHK No. to total the sum. The totalizerat the drive-through exit recall transferring CHK No. in order of the oldest record. Acustomer can recieve the ordered items, and pay for them.
62
Application System
1. Press the <STORE> key <A> to sub-total the registered items. The CHK No. of theseCHK No. transfer to the Check Tracking Master/Backup Master.
2. Press the <RECALL> key to recall.
Important
• A six-digit CHK number should be start from “99”.• When OPEN CHK Z (ALL) report is printed out, the CHK No. range will be reset. After
this operation, the next CHK No. by using Store function will be the range start.• This function works with the option “Clearing CHK/TBL No. by using the same number
again” only. (Refer to page 52 of Programming Manual)
QT2000-32QT2000-1
R/J R/JR/J R/J
Entrance for order <A> Exit for payment <B>
Temporary receipt
Store Recall
CHK No.100
HamburgerFrench FriesHot Coffee
CHK No.101
Cheese BurgerOrange Juice
Press the <Store> key →
Press the <Store> key →
CHK No.100
HamburgerFrench FriesHot Coffee
CHK No.101
Cheese BurgerOrange Juice
Press the <Recall> key →
Press the <Recall> key →
PRN (1) PRN (2) PRN (1) PRN (2)
63QT-2000 Reference Manual
Clerk 1 Clerk 2 Clerk 3
Registration
Registration
Registration
Registration
Registration
Registration
Finalization
Finalization
Finalization
Guestreceipt issuance
Guestreceipt issuance
Guestreceipt issuance
Sign on clerk 2 (clerk 1 registration put on hold)
Sign on clerk 3 (clerk 2 registration put on hold)
Sign on clerk 1
Sign on clerk 2
Sign on clerk 3
Sign on clerk 1, clerk 1 is printed on the receipt/journal.Displays subtotal amount without add-on tax for clerk 1.
Sign on clerk 2, clerk 2 is printed on the receipt/journal.Displays subtotal amount without add-on tax for clerk 2.
Sign on clerk 3, clerk 3 is printed on the receipt/journal.Displays subtotal amount without add-on tax for clerk 3.
2-6. Clerk control function
2-6-1. Clerk interrupt
The register can be programmed to allow the clerk interrupt function, which makes itpossible for multiple clerk to simultaneously use the same register. If a clerk startsregistration of a transaction, another can be interrupt the original registration and begin anew one. The original clerk can later resume the interrupted original registration.
Notes1) Error correct operation
The error correct operation cannot be performed for registrations made before a clerkchange. The error correct operation should be performed before clerk change.
2) Validation print operationThe validation print operation can be performed following clerk change.
3) Guest receiptA guest receipt can be issued following clerk change, and receipts can be issuedseparately for each clerk.
4) Cancel operationThe cancel operation can be performed not the all receipt but only the same transaction.
5) ModeWhile any clerk's registration is on hold, the mode cannot be changed.
64
Application System
2-6-2. Clerk detail memory
The register can total any daily total memory (such as fixed totalizer, department PLU, etc.)clerk by clerk.After initialization, clerks have 10 detail memories which are assigned to gross, net, and4 media in drawers. If you want to set more detail memories to clerks, allocate clerk detailmemory and detail link memory at the same time.
Clerk detail memory: File 011/111/211/311/411/511/611Clerk detail link: File 030
2-6-3. Clerk training
Clerk training can be performed when employing new clerks or retraining clerks.Training is normally performed during working hours, and the QT-2000 has the followingtraining functions.
1) It is not necessary to remove one terminal from the system for training purpose duringworking hours.
2) Programming options, etc., are controlled exactly the same way as a working clerk.3) Receipts are different from those normally used. The “TRAINING” message is printed
at the top and bottom of the receipt. And the training receipts are filled with training filler(“*” default.)
4) Only the REG/RF/REG– mode can be used for training.5) The totalizers and counters that are updated in the training mode are just the clerk
memory which is programmed to training clerk. (programmable option)Stock counter is updated in the training mode. (programmable option).Other totalizer and counters are not updated.
2-6-4. Manager mode control
There is no REG 2 mode on the QT-2000, but you can control some functions (you want)under manager control.
Preparation for this function:1) Set “NO” to any functions you want to disable for CLERKS in the Allowed function 1 ~
4 list in the clerk programming. (See page 83 ~ 86 of the programming manual.)2) Set the type of operator to “Manager” for the manager. (See page 78 of the programming
manual.)
Operation for this function:
1. When the transaction is prohibited, the register displays errormessage and the clerk calls the manager.
PLU0003 •30.003 ST •60.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00 1 PLU0002 •20.00 1 PLU0003 •30.00
Operator Error
65QT-2000 Reference Manual
2. The manager enters “2” and press the <REG mode> key.
3. The manager enters his/her secret code and press the <YES>key. After this operation, the prohibited transaction can beregistered.
4. Perform manager operation (in this example; void opera-tion).
5. Pressing the <REG mode> key is required, when the managerreturns his/her office.
----3 ST •60.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00 1 PLU0002 •20.00 1 PLU0003 •30.00
0.003 ST •60.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00 1 PLU0002 •20.00 1 PLU0003 •30.00
REG2 Mode
0.002 ST •30.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00 1 PLU0002 •20.00
REG Mode
PLU0003 -30.002 ST •30.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00 1 PLU0002 •20.00
66
Application System
2-7. Arrangement key function and scheduler
The arrangement key function provides a macro command function for the QT-2000system. Any operation that can be performed using the keyboard of the QT-2000 can beprogrammed to the arrangement file (file 038 ~ 438). Any operation programmed to thearrangement file can be performed by pressing the arrangement key (function code 044).Multi operations can be programmed into one arrangement program, and also entry of anumeric parameter can be included anywhere in the arrangement program.For example, when an arrangement program is programmed for executing fixed totalizerZ consolidation for all terminal and the program is linked to an arrangement key, thatoperation can be executed simply by pressing the arrangement key.The scheduler function is provided for scheduled execution of arrangement key operation.Execution of every specified time, as well as scheduled execution, can be performed usingthis function.The scheduler file (file 062) must be reserved to use the scheduler function.
2-7-1. Arrangement key function
The arrangement file and arrangement keys must be reserved for the QT-2000 to use thearrangement key function.The arrangement file is used to store the arrangement programs. An arrangement filerecord is 24 bytes long, and a maximum of 999 records can be reserved. Arrangementprograms are programmed using character data, and multiple arrangement programs canbe programmed in the arrangement file.Multiple arrangement keys can be preset on the keyboard, and each key can be linked toan arrangement program. The linked arrangement program is then called and executed bypressing the arrangement key.The following table shows the command parameters of the arrangement key function thatcan be interpreted and executed by the QT-2000.Command parameters can only be separated by spaces.Note that spaces cannot be included within the command parameter.Details of command parameters and their functions are explained next.
1) Number inputThere are two methods to enter a number in an arrangement program.– Constant number input
Preset a fixed number (constant value) enclosed in parentheses in the arrangementprogram.Example: To enter “1234” → preset (1234)
– Input of a single number when the arrangement program is executedA single number can be entered using the arrangement key. The number entered can beused at any position and any time in the arrangement program.Generally, an input number is temporarily stored in the work area (number entry buffer)reserved for data processing, and is cleared after the processing is performed. With thearrangement key function, a parameter save buffer is provided for saving the contentsof the number entry buffer. When a “%GET ” command is encountered in anarrangement program during processing, the data in the number entry buffer is savedto the parameter save buffer. Set “%PUT ” command to use the data saved in theparameter buffer. The “%PUT ” command can be used to load the data saved in theparameter save buffer into the numeric entry buffer. These commands may be includedas often as necessary. The data in the parameter save buffer is changed only when a“%GET ” command is processed.
67QT-2000 Reference Manual
Note:• Set a “%GET ” command, first, to use the number entered by the arrangement key later.• When the “%GET ” is programmed following constant number input, the constant
number is saved to the parameter save buffer.• Numbers input using a “%PUT ” command or by “([number])” are entered to the
number entry buffer in the same way as numbers input using the 10-key pad.
2) Key function specificationAny function key can be specified for an arrangement key function. :[function code]:[record number] → Used for ordinary function keysThe numbers can be specified for zero suppression.
Note:The arrangement key itself, cannot be programmed for in an arrangement program.
3) Mode settingAny mode key can be specified for an arrangement key function. :[function code]:[mode definition]→ Used for mode keys
Note:121:01 : REG mode121:02 : RF mode121:03 : REG– mode122:01 : X/Z mode:122:02 : MGR mode:122:03 : Collection/Consolidation mode:122:04 : Auto-program mode:122:05 : Ir mode:123:01 : PGM1 mode:123:02 : PGM2 mode:123:03 : PGM3 mode:123:04 : PGM4 mode:123:05 : PGM5 mode:123:06 : PGM6 mode:123:07 : PGM7 mode:
4) Display controlThere are eight commands for controlling the display:
DON1 : Switch the main LCD on.DOFF1 : Switch the main LCD off.DON2 : Switch the second LCD on.DOFF2 : Switch the second LCD off.ON1 : Update the main LCD.OFF1 : Not update the main LCD.ON2 : Update the second LCD.OFF2 : Not update the second LCD.
68
Application System
5) R/J print controlThere are two commands for controlling the R/J printer:
PON : Power the R/J switch on.POFF : Power the R/J switch off.
6) Controlling the flow of arrangement command executionThere are five commands for controlling the flow of arrangement command execution:
:Snnnn : This is a start mark of an arrangement. “nnnn” (4-digits code) are used forarrangement table number set to each arrangement key.
:[label] : Preset the label (name of specific position) to specify the jump destinationpoint in the arrangement file. The actual data for labels can be freelydesignated.
Example: To specify “LABEL-1” as label → :LABEL-1
G:[label] : This is an absolute jump command. If the system encounters this command,command execution flow unconditionally jumps and continues from thepoint preset by the label.
I > ([number]):[label] : This is a conditional jump command. If the systemencounters this commands, the value in the numberentry buffer compared with the specific number. If thevalue in the buffer is larger than the specified number,the command execution flow jumps and continues fromthe point preset by the label. If a condition is not matchwith the above-mentioned condition, the step advancesto the next command.
I < ([number]):[label] : This is a conditional jump command. If the value in thenumber entry buffer is less than the specified number,the command execution flow jumps to the point presetby the label. If a condition is not match with the above-mentioned condition, the step advances to the nextcommand.
I – ([number]):[label] : This is a conditional jump command. If the systemencounters this command, the value in the numericentry buffer is compared with the specific number. If thevalue in the buffer is equal to the specific number, thecommand execution flow jumps and continues from thepoint preset by the label. If a condition is not match withthe above-mentioned condition, the step advances thenext command.
KNO1 : This is a command to enter the <#-1> key.
KNO2 : This is a command to enter the <#-2> key.
NE : This is a command to wait for numeric entry. After entering numerics,press the <Arrangement> key to continue the arrangement program.
B:nn : This is a command to sound buzzer for nn (nn = 01 ~ 99) seconds.
69QT-2000 Reference Manual
? : Force to execute the arrangement even if an error occurred during thearrangement.
BKPGM : Backup program data to Flash memory.BKXZ : Backup X/Z data to Flash memory.BKALL : Backup all data to Flash memory.
JCL : Clear J-memo older half dataJCLA : Clear all J-memo data
CLPn : Set the default @ menu sheet number to “n” (n = 0 ~ 2) and “stay down@ menu sheet assignment” of all clerk.
CLMn : Set the default menu sheet number to “n” (n = 0 ~ 8) and “stay downmenu sheet assignment” of all clerk.
211: : Press the “ESC” key.212: : Press the “Yes” key.213: : Press the “No” key.
7) End of the arrangement programsThe end command "E" must be included at the end (exit) point of an arrangement program.
70
Application System
2-7-2. Arrangement program example
This section shows examples of arrangement programs.The following example shows an arrangement program that executes X consolidation ofthe file set in the batch 1 ~ 9 files for all terminals.
Example:Programming the following operation for the arrangement table 12– Set the mode to In-line X/Z.– Enter operation code “1111100000000”.– Wait for the numeric entries (batch number).– Enter the <#-2> key.– Enter the <ESC> key.
:S0012 ;Designate the table number (mandatory)122:03 ;Set the mode to In-line X/Z.NE ;Wait for the batch numberI<(0):ERR1 ; If the input number is less than 1, the process jumps to the ERR1.I>(9):ERR1 ; If the input number is larger than 10, the process jumps to the ERR1.%GET ;Save the entered number to the parameter save area.202:0031 ;Press “Clear” button.(1111100000000); Input the operation code for system command%PUT ;Pick up the entered number from the parameter save area.KNO2 ;Specify the <#-2> key for entering the operation code.211:0045 ;Specify the <ESC> key to execute this operation.:ERR1 ;When the input number is not 1 to 9, the following commands are
processed.E ;End the program (mandatory).
2-7-3. Scheduled execution of arrangement key function
An arrangement key function can be executed on a scheduled basis. In order to execute anarrangement key function on a scheduled basis, it is necessary to make appropriate settingsin the scheduler file (file 062).
There are two functions for execution on a scheduled basis:
1) Execute an arrangement key function at the specified time every other day.2) Interval execution of an arrangement key function by setting start time, ending time,
and the interval.
See the page 100 of programming manual for programming details.
71QT-2000 Reference Manual
2-8. Making graphic logo
A graphic logo can be printed on UP-350 receipt. This graphic logo is stored in the grapiclogo file (file 047), and printed at the top of the receipt instead of a normal logo message.This graphic logo data cannot be made by the terminal program, it can be made only by PCand downloaded from PC.
2-8-1. About graphic logo
Graphic logo size: 432 × 104 dotsPrinting sample:
********************************** * CASIO QT-2000 TERMINAL * * GRAPHIC LOGO AREA * **********************************
******COMMERCIAL MESSAGE LINE 1***************COMMERCIAL MESSAGE LINE 2***************COMMERCIAL MESSAGE LINE 3***************COMMERCIAL MESSAGE LINE 4*********
2-8-2. Making graphic logo procedure
Before following this procedure please allocate “Graphic logo” file (file 047) on the terminal.
1. Making a bit-map image file (432 × 104 pixel; 1-bit color).2. Convert this bit-map file to the internal file by executing “T85conv.exe.”3. Send the converted data from the PC to the terminal via in/on-line.4. Select “Print Graphic” option in the message control of the general feature in the PGM
3 mode.5. Turn off and on the terminal by the <ON/OFF> button.
Note: After recovering power failure, flag clear and INIT2, re-send the graphic logofile to the printer. Otherwise the graphic logo is not printed on the receipt.
72
Application System
2-9. Hourly Item
This function enables to memorize the detailed data of quantity, amount and price of eachitem dealt hourly.It is possible to calculate the proceeds and record the hourly item in any totalizer, and alsoit is possible to print out as an Hourly Item report.
2-9-1. Programming necessary files before using hourly item function.
Hourly Item function requires the following files to function properly, so they must beprogrammed before using it. See the programming manual for the details on format ofindividual files.
– Time Zone fileThis file is used to specify the time zone for the detail items individualy. You can enter thestarting time and the ending time of the time zone, moreover specify the cycle time thatindicates an unit of the appropriate intervals.
– Hourly Item Link fileThis file is used to record the Hourly Item which links with the appropriate time zone. Youcan also specify the particular totalizer for each time zone.
– Hourly ItemThis file is used to store the contents of the quantity, amount, and price of each item.Specify a particular totalizer for each Hourly Item Link file. The following seven filesenable to link the data for Hourly Item Link file: Fixed totalizer, Function, Sub-Department, PLUDepartment, Pull Down Group, Table analysis.
A maximum of 20 recordscorresponds to each TimeZone.
08:00→ 09:00
Hamburger 3 $2.00French Fries 3 $1.50----------------------------------------09:00→ 10:00
Cheese Burger 2 $3.00Hot Coffee 2 $0.50 ---------------------------------------- • • •11:00→ 12:00
Apple Pie 1 $1.00Hot Milk 1 $1.00 ---------------------------------------- 13:00→ 13:15 • • • 13:15→ 13:30
Hourly Item Report Example Start End CycleTime Time
08:00 12:00 01:00
13:00 14:00 00:15 • • • • • • • • •
Time Zone File
REC No. File No. 0001 004 0011 001 • • • • • • • • • •
0005 012 0008 030 • • • • • • • •
Hourly Item Link
20 files
20 files
Zone
73QT-2000 Reference Manual
2-10. Time and Attendance
This function allows shop owners to control his/her employees’ working condition. Time& Attendance require the following files.
– Employee fileThis file is used to regulate the labor conditions.You can program the type of job, the maximum work of hours in a week / in a day peremployee.
– Job Code fileThis file is used to classify the types of job. You can program the general work pay andthe over-time pay ratio per job file.
– Schedule fileThis file is used to administrate the employees’ schedule. You can assign a Starting andan Ending time, break minutes allowed, and the default job code for the shift. (If thedefault code for the shift selection is not made, the system reverts back to the defaultjob code in the employee file) and the grace period. It is possible to record maximum21 shifts (3 shifts / day × 7 days) per employee for the Schedule file.
GRACE PERIOD-this is a period of time in minutes which allows an employee to clock-in/out before their scheduled times. Grace period works in conjunction with theschedule. If the scheduler is not being utilized then the Grace period inputs indicatedbelow become inactive.
Grace period before Start Time- this input indicates how many minutes an employee mayclock-in before the scheduled clock-in time programmed in Time & Attendance mode(See “4-1-15 Programming Time & Attendance” for programming manual.)
Grace period after Start Time- this input indicates how many minutes an employee mayclock-in after the scheduled clock-in time programmed in Time & Attendance mode.
Grace period after End Time- this input indicates how many minutes an employee mayclock-out after the scheduled clock-out time programmed in Time & Attendance mode.
Grace period before End Time- this input indicates how many minutes an employee mayclock-out before the scheduled clock-out time programmed in Time & Attendancemode.
StartTime
EndTime
BreakTime
Grace Before Start
Grace After Start
Grace Before End
Grace After End
1 9:00 12:00 00:15 10 10 5 15
JobCode
Shift
Shift
Shift
First day 5 9:00 12:00 00:15 10 10 5 15
2 9:00 12:00 00:15 10 10 5 15
3 9:00 12:00 00:15 10 10 5 15
2 9:00 12:00 00:15 10 10 5 15
4 9:00 12:00 00:15 10 10 5 15
Shift
Shift
Shift
Second day
••••
••••
••••
••••
••••
••••
••••
••••
Each employee can have 3 shifts per day. The schedule file can hold 7 days schedule. So, totally 21 files can be registered in this file.
••••
Seventh day
74
Application System
– Work Time fileThis file is used to administrate each employees’ weekly hourly wages, work hours, andproceeds. If some employees have a common job, divide the job code individually in casetheir pay ratio is different.
– Time Zone fileThis file is used to administrate the cycle time. You can specify the length of time zone.
2-10-1. Corresponding relations of the file
Employees’ job assignThis function is used to assign a job to each employee. Before assigning the job, be sureto program the details of the jobs. Every employee file can link to some job code files(maximum 3 jobs shift per day), so some employees may link to the same job code file.But be sure to make individual job files if the emplyees work under different hourly wages.
Job 1
Job 2
Job 3
Job 4
Job 5
Job 6
Employee 1
Employee 2
Employee 3
Employee 4
75QT-2000 Reference Manual
Employee’s Schedule and total business results per week
•••
•••
•••
•••
•••
Employee 1
Employee 1
Employee 1
Employee 1
Employee 1
Employee 1
Employee 1
Employee 1
Employee 1
Employee 2
Employee 2
Employee 2
Employee 2
Employee 2
Employee 2
Employee 2
Employee 2
First week
First week
First week
First week
First week
Second week
Second week
Second week
Second week
First week
First week
First week
First week
First week
Second week
Second week
Second week
Monday
Monday
Monday
Tuesday
Monday
Monday
Monday
Monday
Sunday
Monday
Monday
Monday
Tuesday
Monday
Monday
Monday
Monday
Shift 1
Shift 2
Shift 3
Shift 1
Shift 3
Shift 1
Shift 2
Shift 3
Shift 3
Shift 1
Shift 2
Shift 3
Shift 1
Shift 3
Shift 1
Shift 2
Shift 3
Employee 1
Employee 2
Employee 3
Employee 4
Employee 1
Employee 1
Employee 1
Employee 1
Employee 1
Employee 2
Employee 2
Employee 3
Monday
Monday
Monday
Tuesday
Sunday
Monday
Monday
Monday
Shift 1
Shift 2
Shift 3
Shift 1
Shift 3
Shift 1
Shift 2
Shift 3
76
Application System
Calculating the total wages of the employees per hour
Flow of Time & Attendance operationThe following flow shows the order of time & Attendance function by pressing thespecified keys: It is possible to specify one key as both <CLOCK-IN> and <CLOCK-OUT> function, or specify two keys separately. ( Refer to “4-3-7-33 Worksheet for clock-in/clock-out” in Programming Manual for details.)
CLOCK-IN → BREAK-IN → BREAK-OUT → CLOCK-OUT
2-10-2. CLOCK-IN Operation
This function is used to register the Starting work time. An employee can operate clock-in under CLOCK-IN compulsory.
2-10-2-1. CLOCK-IN operation (1)
Program: Not using the window and impossible to specify Job Code.Allow to specify Job Code = NO, Display Job Code window = NO(Refer to Programming Manual, page 72.)
Operation
1. XXXXXX <CLOCK-IN>When you press the <NO> key, the Sign On display willappear.
XXXXXX
Zone 1 Cycle 1
Zone 1 Cycle 2
Zone 1 Cycle 3
Zone 2 Cycle 1
Zone 2 Cycle 2
Totalizer 1
Totalizer 2
Totalizer 3
Totalizer 4
Totalizer 5
0.00
REG 12-31-97 11:59 AM 001234
GLENN DEAL 11:59 AM
Clock-in OK?
Employee No.
77QT-2000 Reference Manual
2-10-2-2. CLOCK-IN operation (2)
Program type:Allow to specify Job Code = YES, Display Job Code window = NO(Refer to Programming Manual, page 72.)
Operation
1. XXXXXX . YY <CLOCK-IN>When this message appears, press the <YES> key to registerthe start of working hours.When you press the <NO> key, the Sign On display willappear. Enter the Employee No. (within 6 digits), “.”(decimalpoint), and the Job Code (2 digits).
XXXXXX . YY <CLOCK-IN>
2-10-2-3. CLOCK-IN operation (3)
Program type:Display Job Code Window = YESAllow to Clock-in with Non-Preset Job-Code = NO(Refer to Programming Manual, page 72.)
Operation
1. XXXXXX <CLOCK-IN>2. Choose the appropriate Job Code from the CLOCK-IN menu,
and press the <YES> key to register the start of workinghours.
→ Job codes that are programmed in Employee file are displayed.0.00
REG 12-31-97 11:59 AM 001234
CLOCK-IN 1.Cashier 2.Cook 3.Dish Washer 4.Cleaning
Employee No. Job Code
0.00
REG 12-31-97 11:59 AM 001234
GLENN DEAL 11:59 AM
Clock-in OK?
78
Application System
2-10-2-4. CLOCK-IN operation (4)
Program type: Display Job Code Window = YESAllow to Clock-in with Non-Preset Job Code = NO(Refer to Programming Manual, page 72.)
Operation
1. XXXXXX <CLOCK-IN>2. Choose the Job Code from the pulldown menu, and press the
<YES> key to record the attendance time.→ All Job Codes that are programmed in Job Code file are displayed.
Receipt sample
REG 12-31-97 11:59 AM 001234 — Header
Harrison — Employee character (16 digits) CLOCK-IN 11:59 AM — Special character (REC #29), time JOB Dish Washier — Special character (REC #33), JOB character
According to the programming special characters (Programming Manual: page 132), areceipt for each employee is printed out.
0.00
REG 12-31-97 11:59 AM 001234
CLOCK-IN 1.Cashier 2.Cook 3.Dish Washer 4.Cleaning 5.JOB A 6.JOB B 7.JOB C 8.JOB D
79QT-2000 Reference Manual
0.00
REG 12-31-97 01:59 PM 001234
Enter cash tip amount and press <YES> key.
0.00
REG 12-31-97 01:59 PM 001234
GLENN DEAL 01:59 PM
Clock-out OK?
2-10-3. CLOCK-OUT Operation
This function is used to register the Ending work time. An employee can operate CLOCK-OUT under clock-in compulsory.
2-10-3-1. CLOCK-OUT operation (1)
Operation
1. XXXXXX <CLOCK-OUT>.2. When this message appears, press the <YES> key to register
the end of working hours.
2-10-3-2. CLOCK-OUT operation (2)
Program: Tip Declaration Compulsory (Refer to Programming Manual, page 71.)
Operation
1. XXXXXX <CLOCK-OUT>.2. When this message appears, the employee should enter the
cash tip amount, if not, it is impossible to close the accounts
Receipt sample
REG 12-31-97 11:59 AM 001234 — Header
Harrison — Employee character (16 digits) CLOCK-IN 11:59 AM — Special character (REC #29), time JOB Dish Washier — Special character (REC #33), JOB character CLOCK-OUT 01:59 PM — Special character (REC #30), time
WORK TIME 02:45 — Special character (REC #34), working hours BREAK TIME 00:45 — Special character (REC #35), recess
According to the programming special characters (Programming Manual: page 132), thereceipt for above operations’ details are printed out.
80
Application System
2-10-3-3. BREAK-IN Operation
This function is used for the employees to register a recess.
Operation
1. XXXXXX <BREAK-IN>.2. When this message appears, press the <YES> key to register
the recess.The receipt is not printed out, except J-memo.
2-10-3-4. BREAK-OUT Operation
This function is used for the employees to register the end of a recess.
Operation
1. XXXXXX <BREAK-OUT>.2. When this message appears, press the <YES> key to register
the end of a recess.The receipt is not printed out, except J-memo.
2-10-3-5. Manager Operation
When the manager operate CLOCK-IN after signing in, the manager can operate andmodify any employee’s record despite of corresponding employee number.Following operations are possible to operate by the manager:
Specify the Job Code/CLOCK-IN/ CLOCK-OUT/BREAK-IN/BREAK-OUT
Operating Flow
Manager sign in → CLOCK-IN/OUT operation, BREAK-IN/OUT operation → Sign-off
0.00
REG 12-31-97 11:59 AM 001234
GLENN DEAL 11:59 AM
Break-in OK?
0.00
REG 12-31-97 11:59 AM 001234
GLENN DEAL 11:59 AM
Break-out OK?
81QT-2000 Reference Manual
CLK# information
CLK#1 information
CLK#2 information
CLK#3 information
•
•
CLK#99 information
BIT1=0:Not CLOCK-IN
1:CLOCK-IN
Each CLK# information holds 2 BIT.
BIT2=0:In the middle of BREAK-IN
1:Not in the middle of BREAK-IN
2-11. Sign-in control
This function is used to ban the sign-in operated by an employee who has not CLOCK-IN.The following conditions should be fixed.
• Use only one terminal (Master terminal) for the CLOCK-IN/OUT operation. Thisterminal should be connected in line to the satellite terminals.
• The clerk file’s information should be common among all the terminals.• Be sure there is a clerk who is specified as “Manager” in the clerk file. If no manager,
it may be locked to operate.
2-11-1. Sign-in
1. When an employee normally operate CLOCK-IN/OUT, BREAK-IN/OUT, theemployee’s attendance information is sent from the main terminal to the satelliteterminals.
Flow of sign-in
CLK# information
CLK#1 information
CLK#2 information
CLK#3 information
•
•
CLK#99 information
Sign-in byManager
Sign-in byClerk
Sign-in OK
CLOCK-IN
CLOCK-IN unfinishedUnable to CLOCK-IN
(E175 Error message appears)
He/she is NOT in the middle of BREAK-IN
He/she is in the middle of BREAK-IN
Sign-in OK
Unable to CLOCK-IN(E175 Error message appears)
82
Application System
2-11-2. Solution to abnormality of master terminal
When the satellite terminals cannot receive any information from the master terminal, themaster terminal shows the error message on the window and prints out the receipt withterminal IDs that failed to communicate the data.
Receipt image
REG 12-31-98 11:59 AM 001234 — Header
Communication Error — Fixed flash message MC#01 XXXX — Machine ID, Error code MC#03 XXXX — Machine ID, Error code
• The error message and receipt will appear whenever the sign-in is failed. If you cannotsolve the INLINE data communication problem, program the system connection again,and remove the uncommunicative terminal.
2-11-3. Solution to abnormality of satellite terminal
• When the satellite terminal cannot receive any information from the main terminal, thedefault CLOCK-IN/OUT (always 0) information remain.In this case, only manager can sign-in.
• When the satellite terminal could receive the CLOCK-IN/OUT information from themaster terminal a few times, but failed to receive after then, the CLOCK-IN/OUTinformation in all the satellite terminals leaves the last received information. In suchcase, the last received information control employees’ sign-in/out. (Manager canalways sign-in.)
2-11-4. Sign-in compulsory
When the satellite terminal cannot receive the information in spite of normal CLOCK-INoperation on the master terminal, an employee may not sign-in for some reason.In such case, the manager needs the following operation.
1. Sign-in by the manager (Normal sign-in operation.)2. 99xxxx <CLK#> (xxxx(4 digit):Enter the employee’s secret code.)3. The corresponding employee’s program should be modified.
BIT1=1:CLOCK-INBIT2=1:Not in the middle of BREAK-IN
4. Sign-off by the manager or corresponding employee (Normal sign-off operation.)
Note:When the error message appeared under the employee’s CLOCK-IN operation, Managershould operate above steps.
0.00
REG 12-31-98 11:59 AM 001234 Harrison CLOCK-IN 11:59 AM JOB Dish Washier
E177 Time&Attendance Data Communication Error. Please Call Manager.
Please Sign on.
83QT-2000 Reference Manual
2-12. IDC (Item Data Capture)
This function is used for capturing all the registered item data by the REG/REF/REG-modes. IDC file stores these captured items. Whenever the total is over, the records areappended to the IDC file.
2-12-1. Available Capturing Items
Select the appropriate items that should be captured, and program these items into the IDCLINK file. The available items and their contents are indicated below.
smetI stnetnoC .oNeliF
ULP
• .noitcasnarttnecerehtfotroperehT
• ro,snoitcnuf/smetiehtfotroperehT.tnemetatsdeliatedehtlla
400
tnemtrapeD-buS 300
tnemtrapeD 500
noitcnuF 200
puorGnwoDlluP 620
krelC• .noitcasnarttnecerehtfotroperehT• ro,snoitcnuf/smetiehtfotroperehT
.stnemetatsdeliatedehtlla700
84
Application System
IDC function file
noitcnuF edoC noitcnuF edoC noitcnuF edoC
PON 000 - LLIB 740 - .TSBUS 111 -
● HSAC 100 O #ULP 7* 840 O NETTEK/K 1* 311 O
● EGRAHC 200 O CRP 940 - NOBESUOH 1* 411 O
● KCEHC 300 O ● 10TPED 150 O YRTNETSOP 511 -
● TIDERC 400 O R/BS 450 - TAEPERR 611 -
● BN 600 O PILS 550 - KHCNEPO 711 -
QNICRP 800 - R/FS 650 - ● GHCAIDEM 811 OQNIKTS 900 - S/T 1* 750 O #TAES 1* 911 O
● RAHC 010 O #LBT 5* 850 O FFO/NOPSID 021 -
● TRP 110 O ● TPMEXE 260 O EDOMGER 5* 121 OPKHC 210 - ● 1000ULP 360 O EDOMZ/X 221 -
SNARTKLC 310 - UNEM 460 - EDOMMGP 321 -
● SNARTLBT 410 O NEPO 760 - ● NI-TAE 821 O
● PIT 510 O 2NEPO 860 - TUO-EKAT 921 OTCRMRN 1* 610 O @ts1 7* 960 O EROTS 031 -
● NAOL 910 O @dn2 7* 070 O LLACER 131 -
● CR 020 O #KLC 270 O ● 10TPEDBUS 7* 331 O
● DR 120 O Z/XEPO 370 - #TPDS 7* 431 O
● PU.P 220 O ● LATOTBUS 8* 570 O #TPED 7* 531 O
● NOPUOC 320 O FFO/NOTCR 670 - TSIL 7* 631 O
● TISOPED 520 O TSAT 770 - #TSIL 7* 731 O
● - 720 O #EPO 870 -,6,5,4,3.2,1,0
9,8,7102 -
● -% 2* 820 O TSDM 1* 080 O RAELC 202 -
● + 920 O X 1* 280 O PSDESREVER 602 -
● +% 2* 030 O TQ 1* 380 O OMEMJ 702 -
FR 1* 330 O XX 1* 480 O CSE 112 -
● DIOV 3* 430 O TSIS 2* 580 O SEY 212 -
NPC 1* 630 O XXX 1* 090 O ON 312 -
DLV 730 - KHCWEN 1* 190 - ← 412 -
TCR 830 - KHCDLO 1* 290 - → 512 -
E.KC 930 - DLO/WEN 1* 390 - ↑ 612 -
● # 040 O KHCDDA 9* 490 - ↓ 712 -
● SN/# 4* 140 O KHCPES 9* 590 - EMOH 812 -
SN 240 - 00 690 - EDOMPSID 912 -
● TC 5* 340 O 000 790 - NWODEGAP 022 -
GRA 6* 440 O . 890 - PUEGAP 122 -
EC 1* 540 O TUO/NI-KCOLC 801 - ● LECNAC 632 OTAV 5* 640 O TUO/NI-KAERB 901 -
● .CDIroftegratsademmargorpebotsmetielbaliavA:O tegratCDI:
tegratfotuO:-
85QT-2000 Reference Manual
*1 This function itself is not an IDC target. However it is logged into IDC file withtarget items or functions of IDC.
*2 In case of Subtotal %- or Subtotal %+, Subtotal is also logged into IDC file.In case of selective item subtotal %- or selective item subtotal %+In case of selective item subtotal is also logged into IDC file
*3 1.Error correct is not logged into IDC file.2.This function itself is not an IDC target. However it is logged into IDC filewith voided items.3.Void reason is also target if it is used with void key.
*4 # is an IDC target , not NS.
*5 This function itself is not an IDC target. However it is stored into INDEX file.Therefore it appears in IDC data as one of header information or finalizeinformation.
*6 This function itself is not an IDC target . However the functions that areexecuted by arrangement is an IDC target.
*7 This function is not an IDC target. However registered item is an IDC target.
*8 If D5 = 4 (print when key is pressed), then it is logged into IDC file.
*9 Transferd items by the add check and the separate check are not captured.
86
Application System
0
Item Data Capture
Item Data Capture NO
2-12-2. Set Up the IDC Start/End
Specify IDC Start or IDC End in Manager Mode. IDC does not start if you not allocatenecessary files for IDC.• When IDC function is stopped, you can restart IDC by performing FC or INIT 2(“1-
3 How to flag clear QT-2000 terminal” Programming Manual, page 14).
Operation
Note:1. If you stop the IDC when the IDC file is full of items, you can stop the error sound
without clearing any registered data.2. The necessary files for IDC
• File 036 (REG buffer)• File 063 (IDC buffer)• File 057~059 (IDC file)• File 804 (IDC Link file)
3. You can stop the IDC full error without reset all IDC data by using END option.
87QT-2000 Reference Manual
2-12-3. How to memorize the Captured Items
Flow of the transferring data1. Program: Store data = Whole transaction (Refer to Programming Manual, page 76.)
When an appropriate item is selected, this item and the header will be memorized intothe IDC file (see the illustration below).
ExamplePLU 0001———Memorized into IDC file (1)PLU 0002———Memorized into IDC file (2)PLU 0003———Memorized into IDC file (2)
2. Program: Store data = Item only (Refer to Programming Manual, page 76.)Before totalizing all the transactions, the whole IDC Buffer and the header <B> will bememorized into the IDC file.
ExamplePLU 0002——Memorize all the transaction into the IDC file.
HeaderPLU 0001
HeaderAll transaction
PLU 0001
PLU 0002
PLU 0003
Total
IDC Buffer IDC file (1)
HeaderPLU 0002
HeaderPLU 0003
IDC file (2)
88 Ap
plic
atio
n S
ystem
FILE #
Reason RECof Colecting
@
ITEMSTATUS
AMT
QTY
Not Used
03
59
1113
1823
TYPE
MC ID 1
03
50Item
(PL
U/SU
B-D
epartment, D
epartment)
PDGP REC #
28
REC #
72
TAXSTATUS
30
2-12-4.ID
C D
ata File S
tructure
Header
08
1113
1619
21
CHK #
1
01
26
Header (W
hole Index)F
irst Record
ConsecutiveNo.
MC ID
MODE
CLK #
Time
Number ofpurchsed item
Not Used
3136
4150
2
NET AMT
ST
ST TTL
DateItem
REC #
CE KEYREC #
03
79
1419
2429
30
TYPE
Your CountryNo.
1
03
50
Function
Cash, C
harge, Check, C
redit
Foreign No.
MC ID
Total Amount
Change Amount
Totaling Type
Not Used
FILE #
GROSS QTY
05
712
1750
TYPE
1
03
NB
GROSS AMT
MC ID
Not Used0
35
47
FILE #
1
03
CH
AR
/PR
T
MC ID
50
CHARACTER
Not Used
TYPE
5FILE #
REC #3
7REC #
FILE #
NB FEE
05
712
50
TYPE
1
03
NB
charge
MC ID
Not Used
REC #
3
22
22
89Q
T-2
00
0 R
efe
ren
ce
Ma
nu
al
Function
03
TB
L T
RA
NS
MC ID
Not used
ST
EX-CHK #
REC #
TYPE
NEW CHK #
03
TIPMC ID
Not used
AMT
REC #
TYPE
RC
/PD
/DE
PO
SITL
OA
N/P
/UP
0
03
+/- CO
UP
ON
MC ID
AMT
ITEMSTATUS
Reason RECof Collection
REC #
TYPE
No.
PRICE
Not Used
%+/%
-
RATE
%+/%
- after SIST
SIST No.
Not Used
05
712
501
3
FILE #
1824
05
712
501
3
FILE #
05
712
501
3
03
MC ID
Not used
AMT
REC #
TYPE
FILE #
03
MC ID
Not used
AMT
REC #
TYPE
05
712
501
3
FILE #3
59
1113
1823
150
287
FILE #
0
03
MC ID
AMT
ITEM STATUS
Reason RECof Collection
REC #
TYPE
No.
MAIN TYPE
Not Used
25
910
1823
281
5029
7
FILE #
MAIN AMT
33
RATE
0
03
MC ID
AMT
REC #
TYPE
MAIN TYPE
Not Used
25
916
2126
150
277
FILE #
MAIN AMT
32
22
22
2
TAXSTATUS
TAXSTATUS
313
3
90 Ap
plic
atio
n S
ystem
#Printing of #, #/N
S
Number
Figures
EX
EM
PT
TA. 4
TA. 1
TA. 2
TA. 3
TA. 5
TA. 6
TA. 7
03
ST/M
DST
CE REC #
ST
PRINT ST
CE ST
ME
DIA
CH
G
AMT
Not Used
STO
RE
Not Used
CHK #
EA
T-IN
/TA
KE
-OU
TC
AN
CE
L
03
MC ID
Not used
REC #
TYPE0
57
1250
13
FILE #14
0
03
MC ID
REC #
TYPE
Not Used
35
914
1924
291
5034
7
FILE #
39
03
MC ID
REC #
TYPE
Not Used
512
1722
261
507
FILE #
03
MC ID
REC #
TYPE
05
712
501
3
FILE #
Not Used
03
MC ID
REC #
TYPE
05
712
501
3
FILE #
ST
1824
AMT
Not Used
03
MC ID
REC #
TYPE
05
712
501
3
FILE #
AMT
Not Used
03
MC ID
REC #
TYPE
05
712
501
3
FILE #
22
TAXSTATUS
44
222
22
91QT-2000 Reference Manual
atadfoepyT tnuomA metierutpaC
LLUN_EPYTLTD 0 )elbaliavanu(desutoNTPEDS_EPYTLTD 01 tnemtrapedbuS:metiniaM
TPED_EPYTLTD 51 tnemtrapeD:metiniaM
ULP_EPYTLTD 02 ULP:metiniaM
XIF_TES_EPYTLTD 52 )dexif(dlihc/unemteS:metitnednepeD
LES_TES_EPYTLTD 03 )noitpo(dlihc/unemteS:metitnednepeD
DNOC_EPYTLTD 53 tnemidnoC:metitnednepeD
PERP_EPYTLTD 04 noitaraperP:metitnednepeD
SULP_METI_EPYTLTD 06 +metietarapesA:)tnuocsid(metitnednepeD
SUNIM_METI_EPYTLTD 16 -metietarapesA:)tnuocsid(metitnednepeD
NPC_METI_EPYTLTD 26 NPCmetietarapesA:)tnuocsid(metitnednepeD
SULP_P_METI_EPYTLTD 36 +%metietarapesA:)tnuocsid(metitnednepeD
SUNIM_P_METI_EPYTLTD 46 -%metietarapesA:)tnuocsid(metitnednepeD
HSAC_EPYTLTD 17 hsaC:ezilaniF
EGRAHC_EPYTLTD 27 egrahC:ezilaniF
KCEHC_EPYTLTD 37 kcehC:ezilaniF
TIDERC_EPYTLTD 47 tiderC:ezilaniF
CRTKHCBN_EPYTLTD 08 noitarepo)gnikcartkcehc(BN
RTLBTBN_EPYTLTD 28 noitarepognirrefsnartelbaT
LECNAC_EPYTLTD 58 lecnaC
RTLBT_EPYTLTD 68 refsnartelbaT
EEFBN_EPYTLTD 78 egrahcBN
SULP_TS_EPYTLTD 001 +TS
SUNIM_TS_EPYTLTD 101 -TS
NPC_TS_EPYTLTD 201 NPCTS
SULP_P_TS_EPYTLTD 301 +%TS
SUNIM_P_TS_EPYTLTD 401 -%TS
SULP_TNECREP_TSIS_EPYTLTD 501 +%TSIS
SUNIM_TNECREP_TSIS_EPYTLTD 601 -%TSIS
TS_EPYTLTD 111 TS
TSDM_EPYTLTD 211 TSDM
RAHC_TLP_EPYTLTD 311 RAHCTNIRP
GSM_TLP_EPYTLTD 311 )LLACERRAHC(EGASSEMTNIRP
PRAHS_EPYTLTD 511 tnirP#
PIT_EPYTLTD 611 piT
OPED_EPYTLTD 711 tisopeD
XEXT_EPYTLTD 811 tpmexexaT
CR_EPYTLTD 051 CR
DP_EPYTLTD 151 DP
GHC_AIDEM_EPYTLTD 251 egnahclaideM
YENOM_TEG_EPYTLTD 351 )teg(egnahcaideM
YENOM_TUP_EPYTLTD 451 )tup(egnahcaideM
NAOL_EPYTLTD 551 naoL
PUKCIP_EPYTLTD 651 pukciP
PUKCIPNAOL_NIF_EPYTLTD 751 pukcip/naolezilaniF
EGNAHCXE_TNUOMA_EPYTLTD 851 egnahcxeycnerruC
KCEHC_NI_HSAC_EPYTLTD 951 kcehcagnihsaC
RELLIF_EPYTLTD 552 GOLGERrof
2-12-5. IDC data type
92
Application System
2-12-6. Transferring IDC
It is possible to do collection of IDC files through in-line system. Refer to the terminalstructure as below.
Flow of the IDCPC sends Z-lock command by using JOB command to collection master.
1. PC enables to check the Z-lock confirmation.2. PC sends the collection command by using JVp command to collect IDC files from all
satellite terminales.3. Collection master receives the IDC data from each satellite in order.
PC enables to check whether the collection master has finished the JOB.4. PC sends the Z-command or X-command to the collection master.5. PC receives the collection data from consolidation file. If the Z-command has issued
at 4, consolidation file in the collection master are all reset.
2-13-7. Data Transferring Flow
IDC data in each terminal totalizer is appended to the consolidation file individualy
Notes:• Just after IDC starts, the total file is cleared to receive new data.• Just after the receiving is over, the data is remained in the consolidation file. To clear
this data, send the Z-command or the file-clear command to the collection master fromthe PC.
• In case of collection Z, all of the IDC files in the satellite terminals are cleared.
SatelliteCollection Master
PC
on-lineC-Net
Satellite
Master TotalizerIDC file
Satellite (1)IDC file
Satellite (2)IDC file
Data from Master Totalizer
Data from Satellite (1)
Data from Satelite (2)
•••
Copy
Append
Append
Consolidation file (in Collection Master)
93QT-2000 Reference Manual
Operation
1. Z-lock window appers on the screen if Z-lock command isissued.
Note:• No receipt is issued. No journal printing.
0.00
REG GLENN 02-19-98 11:59AM 123456
Data Communication Please Wait.
MC #02 X/Z CLAPTON 12-31-97 11:59 AM 001234X 000029 EMPLOYEE * 1234 —Z counterInline 11110Collection 67 —X/Z code (67, 68, 69)MC #01 20:05 1234 —Machine ID/Time/Z counterMC #02 20:05 1234MC #03 20:05 1234MC #04 Error End **** —Error occurs (****is an error code.)
X/Z code: 67 = IDC (1), 68 = IDC (2), 69 = IDC (3)
J-Memo in Collection Master
MC #01 REG HARRISON 02-19-98 20:05 123456
J-Memo in Sattelite
95QT-2000 Reference Manual
3. Manager operation ..................................................................................... 963-1. Machine initialization ................................................................................. 96
3-1-1. INIT ................................................................................................................... 983-1-2. Flag clear .......................................................................................................... 983-1-3. INIT 2 ................................................................................................................ 983-1-4. Restore from flash memory............................................................................... 99
3-2. IPL (Initial Program Loading) .................................................................... 993-2-1. IPL..................................................................................................................... 993-2-2. System configuration before IPL operation ..................................................... 100
3-3. Manager function ..................................................................................... 1023-3-1. System connection check ............................................................................... 1023-3-2. Remote on ...................................................................................................... 1033-3-3. Remote off ...................................................................................................... 1033-3-4. Busy reset ....................................................................................................... 1043-3-5. Stock maintenance ......................................................................................... 1053-3-6. Drawer for clerk............................................................................................... 1063-3-7. CHK# (Clerk interrupt) .................................................................................... 1063-3-8. Order ID change ............................................................................................. 1073-3-9. Error log print .................................................................................................. 1083-3-10. System re-configuration .................................................................................. 1093-3-11. Changing receipt on/off status ........................................................................ 110
3-4. System command execution .................................................................. 1113-4-1. X/Z reporting ....................................................................................................1113-4-2. X/Z collection/consolidation ............................................................................ 1123-4-3. Backup/restore the program data ................................................................... 1133-4-4. Remote power control ..................................................................................... 113
3-5. Data Communication System ................................................................. 1143-5-1. In/on-line connectors....................................................................................... 1143-5-2. Hardware interface.......................................................................................... 1153-5-3. In/On-line functions ......................................................................................... 117
3-6. Collection/Consolidation system ........................................................... 1183-6-1. X/Z collection .................................................................................................. 1203-6-2. X/Z consolidation ............................................................................................ 1223-6-3. X/Z collection/consolidation ............................................................................ 124
3-7. Auto-programming function ................................................................... 1273-7-1. Auto programming functions ........................................................................... 1273-7-2. Auto program operation .................................................................................. 128
3-8. Command receive function ..................................................................... 1293-8-1. Command receiving procedure ....................................................................... 129
96
Manager Operation
3. Manager operation
This section describes manager operations (such as machine initialization, IPL, managerfunctions etc.) of QT-2000.
3-1. Machine initialization
There are four different types of initialization such as INIT, FC, INIT2 and Restore fromflash memory.INIT; Machine initialization, all program and total data are reset.FC; Flag clear, all program and total data are remained, only the current transaction dataare reset.INIT2; Machine initialization 2, all program data are remained, only total data are reset.Restore from flash memory; the data backed up in the flash memory are restored.The procedures of machine initialization are described in the chapter 1 of the QT-2000programming manual. The required passwords are listed below.
Operation Password Digit meaning
Normaloperation
Definemachine ID
Flash reset
Init
Flag clearInit 2
Restore from Flash
Init
Init
1000020000
No need888888888800000000008881000088820000
nn00010000nn00020000
For Eu/DiFor U.S.
For Eu/Di, nn = Machine IDFor U.S., nn = Machine IDFor Eu/Di, nn = Machine IDFor U.S., nn = Machine ID
See following steps for details of programming these last 3 digits (D1~D3).
1petS ?)PK(retnirPnehctiKesuottnawuoyoD
...erauoyfI ....retnenehT 3D~1DfogninaeM ....otoG
retnirpangissaottnawuoyroSEY,trop1MOCot
3D 2D 1D •=3MOC•=2MOC
desutoN=1MOC2petS
• • 0
retnirpangissaottnawuoytub,ON,trop1MOCot
3D 2D 1D •=3MOC•=2MOC
1-retnirP=1MOC2petS
• • 2
arehtienngissaottnawuoydna,ON,PKrontrop1MOCotretnirp
3D 2D 1D •=3MOC•=2MOC•=1MOC
2petS• • •
2petS ?)CP(MEDOM-XesuottnawuoyoD
...erauoyfI ....retnenehT 3D~1DfogninaeM ....otoG
dengissaydaerlaevahuoydna,SEY,ylnoPK
3D 2D 1D CP=3MOC•=2MOC
desutoN=1MOC3petS
0 • 0
retnirpadengissaevahuoydna,SEY,ylnotrop1MOCot
3D 2D 1D CP=3MOC•=2MOC
1-retnirP=1MOC3petS
0 • 2
ynadengissatonevahuoydna,SEY,teysecived
3D 2D 1D CP=3MOC•=2MOC•=1MOC
3petS0 • •
ON 3petS
97QT-2000 Reference Manual
3petS?5103-ASforetnirppilSesuottnawuoyoD
)1-retnirPsadengissasi5103-ASneht,erehSEYyasuoyfI(
...erauoyfI ....retnenehT 3D~1DfogninaeM ....otoG
dengissaydaerlaevahuoydna,SEY,CPdnaPK
3D 2D 1D CP=3MOC5103-AS=2MOCdesutoN=1MOC
ruoyretnEedocTINI0 2 0
dengissaydaerlaevahuoydna,SEY,ylnoCP
3D 2D 1D CP=3MOC5103-AS=2MOC
•=1MOC5petS
0 2 •
ynadengissatonevahuoydna,SEY,teysecived
3D 2D 1D •=3MOC5103-AS=2MOCdesutoN=1MOC
5petS• 2 0
ON 4petS
4petS ?retnirpts1esuottnawuoyoD
...erauoyfI ....retnenehT 3D~1DfogninaeM ....otoG
dengissaydaerlaevahuoydna,SEY,CPdnaPK
3D 2D 1D CP=3MOC1-retnirP=2MOCdesutoN=1MOC
ruoyretnEedocTINI0 2 0
dengissaydaerlaevahuoydna,SEY,ylnoPK
3D 2D 1D •=3MOC1-retnirP=2MOCdesutoN=1MOC
5petS• 2 0
ynadengissatonevahuoydna,SEY,teysecived
3D 2D 1D •=3MOC1-retnirP=2MOCdesutoN=1MOC
5petS• 2 0
oN 5petS
5petS ?retnirpdn2esuuoyoD
...erauoyfI ....retnenehT 3D~1DfogninaeM ....otoG
dengissaydaerlaevahuoydna,SEY,CPdna1MOCotretnirpa
3D 2D 1D CP=3MOC1-retnirP=2MOC2-retnirP=1MOC
ruoyretnEedocTINI0 2 2
dengissaydaerlaevahuoydna,SEY,5103-ASdnaCP
3D 2D 1D CP=3MOC5103-AS=2MOC2-retnirP=1MOC
ruoyretnEedocTINI0 2 2
,SEY ,1-retnirPdnaPKngissauoydna3D 2D 1D 2-retnirP=3MOC
1-retnirP=2MOCdesutoN=1MOC
ruoyretnEedocTINI2 2 0
,ylno1-retnirPngissauoydna,SEY3D 2D 1D 2-retnirP=3MOC
1-retnirP=2MOCdesutoN=1MOC
ruoyretnEedocTINI2 2 0
adengissaydaerlaevahuoydna,ON,CPdna1MOCotretnirp
3D 2D 1D CP=3MOC1-retnirP=2MOCdesutoN=1MOC
ruoyretnEedocTINI0 2 0
dengissaydaerlaevahuoydna,ON,5103-ASdnaCP
3D 2D 1D CP=3MOC5103-AS=2MOCdesutoN=1MOC
ruoyretnEedocTINI0 2 0
dengissaydaerlaevahuoydna,ON,1-retnirPdnaPK
3D 2D 1D CP=3MOC1-retnirP=2MOCdesutoN=1MOC
ruoyretnEedocTINI0 2 0
ynadengissatonevahuoydna,ON,teysecived
3D 2D 1D CP=3MOC1-retnirP=2MOCdesutoN=1MOC
ruoyretnEedocTINI0 0 0
.00001sadexifsiedoc,CAMLPIretfA
98
Manager Operation
3-1-2. Flag clear
Flag clear process is as follows:
3-1-3. INIT 2
Initialization 2 process is as follows:
3-1-1. INIT
Initialization process is as follows:
Start
End
Hardware resetAll RAM reset
Inline ID definition
File creation 1 File creation 2
Initialization resultto J-Memo
Revise terminalconnection table
Input pass word(see above)
Initialization operationInput date/time, ID etc.
Receiving program from other terminal
StartHardware reset
Initialize work area/buffers/flags
Initialization resultto J-Memo EndMenu selection
FC/Init2/Restore
Init 2
Restore from flash
StartHardware reset
Initialize work area/buffers/flags
All totoalizer resetInitialization result
to J-MemoEndMenu selection
FC/Init2/Restore
Flag clear
Restore from flash
99QT-2000 Reference Manual
3-1-4. Restore from flash memory
Restore from flash memory process is as follows:
3-2. IPL (Initial Program Loading)
IPL should be made before initializing when the application software has been modified.
3-2-1. IPL
Initial program loading process is as follows:
StartHardware reset
Initialize work area/buffers/flags
Initialization resultto J-Memo EndDownload all data
from Flash memoryMenu selectionFC/Init2/Restore
Flag clear
Init 2
Start
Continue to INIT
ROM check Communicationport selection
Baud rateselection
Waiting forIPL
Waiting forINIT operation
Store the receivingdata to Flash
100
Manager Operation
3-2-2. System configuration before IPL operation
Connect source terminal (PC) and target terminals.
INIT/IPL code
QT2000QT2000QT2000QT2000
R/JSlip
PC
IPL source
IPL target
IPL Data
R/J R/J R/J R/J R/J
R/J R/JPRN (1) PRN (2)
PRN (1) PRN (2) PRN (1) PRN (2) PRN (1) PRN (2)
noitpircseD eciohC margorPedoc
elbisimmO-----)23~10(DIlacigoLtnacifingiS
rebmun::
D01
D9
elbisimmO------)pukcaB&OMEM-Jehtraelcton(lareneG:000pukcaB&OMEM-JehtraelC:888
tnacifingiSrebmun
:::D
8D
7D
6
sedocnoitanitsedehTnoitropxelareneG:1
SU:2
tnacifingiSrebmun
:D
5
0xiF 0retnE :D
4
3MOC,)0saemas(MEDOMXehtesU:1,MEDOMXehtesU:0
retnirpehtesU:2
tnacifingiSrebmun
:D
3
2MOC,MEDOMXehtesU:1,retnirpehtesU:0
)0saemas(retnirpehtesU:2
tnacifingiSrebmun
:D
2
1MOC,rennacsehtesU:1,)1MOCgnisuton(PKehtesU:0
retnirpehtesU:2
tnacifingiSrebmun
:D
1
101QT-2000 Reference Manual
6. Select baud rate.
7. Press the <YES> key to proceed, in case of downloading viain-line, ID definition is made by this timing. So press the<YES> key terminal by terminal.
8. Send IPL data from other terminal or PC.About the operation of the IPL data sending terminal,refer to the Auto-program section in the Manage Opera-tion chapter of this manual.
9. During receiving IPL data.
10. After finishing IPL, the initialization operation should bedone.
INITIAL PROGRAM LOAD
Version Version label/Number IPL received 24424 : 24
Date 00-00-00 Time 12:34 00
ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SA-3015 OK? Yes
INITIAL PROGRAM LOAD
START IPL
INITIAL PROGRAM LOAD
Waiting IPL data. COM=3
(PC → ECR)
INITIAL PROGRAM LOAD
38400 bps 19200 bps 9600 bps 2400 bps
(PC → ECR)
INITIAL PROGRAM LOAD
156 Kbps 312 Kbps 625 Kbps 1.2 Mbps
(ECR → ECR)
102
Manager Operation
0.00
System Connection CheckINLINE 156KbpsKP 4800bps
#01 Machine01 RS-232C Printer 1 2 Kitchen Printer 1 2 * 4#02 Machine02 RS-232C Printer 1 * Kitchen Printer • • • •#03 Machine03 RS-232C Printer * *
Physical ID, Logical IDRS-232C printer recognition (1:printer (1), 2:printer (2))Kitchen printer recognition (KP Master Terminal only)
Kitchen printer recognition (KP Back up Master Terminal only)
Un recognized RS-232C printer
0.00
MGR C01 15-12-97 12:34 000000
Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change v
3-3. Manager function
Using the manager function makes it possible to control the terminal conditions. Thecontents of the manager function are as follows:
1. System connection check2. Remote on3. Remote off4. Busy reset5. Stock maintenance6. Drawer for clerk7. CHK# (Clerk interrupt)8. Order ID change9. Error log print10.System re-configuration11. Receipt on/off control
3-3-1. System connection check
This command shows the connection status of terminals, R/J printers and kitchen printers.
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Select “1.System Connection Check” and press the <YES>key.
4.After checking the system connection, press the <ESC> key toreturn the previous menu.
Note:
If there is unrecognized terminal there it shows “*” as below.e.g.) #04 ************
103QT-2000 Reference Manual
3-3-2. Remote on
This command is used to power on the terminals connected with the same in-line.
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Select “2.Remote On” and press the <YES> key.
4. Select all terminals or individual terminal, select “YES” toexecute this command.
3-3-3. Remote off
This command is used to power off the terminals connected with the same in-line.
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Select “2.Remote Off” and press the <YES> key.
4. Select all terminals or individual terminal, select “YES” toexecute this command.
Note: In case of waking up a terminal manually, enter 9999999999 and press the <YES> key.
0.00
MGR C01 15-12-97 12:34 000000
Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change v
0.00
Remote On
Terminal All
OK? YES
0.00
MGR C01 15-12-97 12:34 000000
Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change v
0.00
Remote Off
Terminal All
OK? YES
104
Manager Operation
3-3-4. Busy reset
This command is used to release the busy flag of the check used by other dead terminal.Executing this command always releases this flag, so please be careful to perform thisoperation.
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Select “4.Busy Reset” and press the <YES> key.
4. Enter the appropriate check number, and then select “YES”to execute this command.
0.00
MGR C01 15-12-97 12:34 000000
Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change v
0.00
Busy Reset
Check No. 12
OK? YES
0.00
Busy Reset
Check No. 12
OK? YES
Normal End
105QT-2000 Reference Manual
3-3-5. Stock maintenance
This command is used to update PLU stock quantities brought by purchasing or inventoryprocessing.
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Select “5.Stock Maintenance” and press the <YES> key.
4. Select the appropriate PLU and press the <YES> key.
5. Enter adjustment (adding) stock value and press the <YES>key. If you want to decrease stock value, press the <RF> keybefore entering the stock value.The next PLU appears on the screen.
6. Press the <ESC> key to return to the previous menu.
0.00
MGR C01 15-12-97 12:34 000000
Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change v
0.00
Stock Maintenance
PLU 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v
0.00
No. Descriptor Stock 1 PLU0001 0.000 0.000
PLU0001 +100.00
No. Descriptor Stock 1 PLU0001 +100.000 100.000 2 PLU0002 0.000 0.000
106
Manager Operation
3-3-6. Drawer for clerk
This command is used to designate the drawer 1 or 2.
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Select “6.Drawer for Clerk” and press the <YES> key.
4. Enter the appropriate drawer number (1 or 2, “0” meansdrawer 1), and press the <YES> key.
5. Press the <ESC> key to return to the previous menu.
3-3-7. CHK# (Clerk interrupt)
This command is used to designate the check number for clerk interrupt to each clerk.
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Select “7.CHK#(CLK Interrupt)” and press the <YES> key.
4. Enter the appropriate check number, and press the <YES>key.
5. Press the <ESC> key to return the previous menu.
0.00
MGR C01 15-12-97 12:34 000000
Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change v
0.00
Drawer for Clerk C01 0 C02 0 C03 0 C04 0 C05 0 C06 0
0.00
MGR C01 15-12-97 12:34 000000
Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change v
0.00
CHK#(CLK Interrupt) C01 000001 C02 000002 C03 000003 C04 000004 C05 000005 C06 000006
107QT-2000 Reference Manual
3-3-8. Order ID change
This command is used to change the target printer of order temporarily.
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Select “8.Order ID Change” and press the <YES> key.
4. Select “YES” of the Definition Enable field, and enter anappropriate ID number of each order printer and press the<YES> key. Select “YES” of the last line execute thiscommand.
5. Press the <ESC> key to return to the previous menu.
Note: D 3 D2 D1
In case of D3=0, D2 & D1 is ID number of KP (01~04).In case of D3=1, D2 & D1 is ECR phisical ID that connect to printer-1.In case of D3=2, D2 & D1 is ECR phisical ID that connect to printer-2.
0.00
MGR C01 15-12-97 12:34 000000
Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change v
0.00
Order ID ChangeDefinition Enable YES
1.Order1 103 2.Order2 002 3.Order3 003 4.Order4 104 5.Order5 000 6.Order6 000 7.Order7 000
OK? YES
D3 D2 D1
108
Manager Operation
3-3-9. Error log print
This command is used to display/print out the error log file.
1. Sign on a clerk (if necessary).2. Press the <X/Z MODE> key repeatedly to assign Manager
Mode.
3. Select “9.Error Log Print” and press the <YES> key.
4. The display shows current error log.Then press the <ESC> key.
5. Press the <YES> key if you want to print error log.If you do not want to print error log, press the <ESC> key.
0.00
MGR C01 15-12-97 12:34 000000
Manager Mode 3.Remote off ^ 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change 9.Error Log Print 10.System Re-configuration
0.00
ID Date Time OPE ERR
0.00
Error Log Print
Do you want to printout? YES
109QT-2000 Reference Manual
3-3-10. System re-configuration
This command is one procedure of down recovery. It backs the contents of the systemconfiguration file to the original value.It should be executed under these conditions:1) After issuing “Open check report.”2) All ECRs are connected and work normally (Check by System Connection Check)3) No ECRs are during registration, collection, consolidation, sending/receiving pro-
grams.4) Activate “System re-configuration” command at the terminal on which the “System re-
configuration” icon is lit.
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Select “10.System Re-configuration” and press the <YES>key.
4. Choose the option “YES (Perform system re-configuration)/NO (Abort this procedure)” and press the <YES> key.
0.00
MGR C01 15-12-97 12:34 000000
Manager Mode 3.Remote off ^ 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change 9.Error Log Print 10.System Re-configuration
Re-configuration require icon
0.00
System Re-configuration
System Re-configuration NO
OK? YES
110
Manager Operation
3-3-11. Changing receipt on/off status
Even if no <Receipt on/off> key is on the keyboard, you can change the receipt on/off status(on → off, off → on) by the operation described below.
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign Manager Mode.
3. Enter “9999999999” and press the <ESC> key.If the status turns on, the “Receipt on” icon is lit.If the status turns off, the “Receipt on” icon is gone.
99999999.99
MGR C01 15-12-97 12:34 000000
Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change v
0.00
MGR C01 15-12-96 12:34 000000
Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change v
R
111QT-2000 Reference Manual
tigiD eulaV gninaeMD
70 noitideoN1 puorgybgnitidE2 tnemtrapedybgnitidE3 tnemtrapedbusybgnitidE4 retcarahcredroybgnitidE
D6
0 noitcartxeoN1 )selasoreZ(evitcanI4 kcotsfotuO
D5
0 noitacifissalcoN3 KRELC4 )troperkcehcnepo(YLNOLATOT
D4
0 edomXninoitucexE1 edomZninoitucexE
D3
0 aerayliadgniussI1 aera1cidoirepgniussI2 aera2cidoirepgniussI3 aeranoitadilosnocyliadgniussI4 aeranoitadilosnoc1cidoirepgniussI5 aeranoitadilosnoc2cidoirepgniussI
D2D
190~00 01~1troperhctaB
11 rezilatotdexiF21 noitcnufeerF41 ULP46 kcotsULP31 tnemtrapedbuS51 tnemtrapeD61 puorG71 krelC91 enozemiT02 ylhtnoM52 kcehcnepO82 sisylanaelbaT85 yromemlanruoJ22 nosaerdioV
88~18 8~1teehsuneM17 hsalF42 robaL/ylruoH92 eeyolpmE92 ytivitcaeeyolpmE13 metiylruoH76 raelc)1(CDI86 raelc)2(CDI96 raelc)3(CDI
3-4. System command execution
System command functions are provided to perform nonregistration operations, such ascollection/consolidation system control, backup/restore operation of files in the terminals,and remote power on/off control.
3-4-1. X/Z reporting
X/Z command execution1. Issuing flash reportX/Z mode → <X> or <X/FOR>, <XX>, <XXX>, <X/KETTEN>
2. Issuing other reportsX/Z mode → D
7D
6D
5D
4D
3D
2D
1 <#-1>
Meaning of the command data
112
Manager Operation
tigiD eulaV gninaeMD
41D~
0101111 noitcelloC11111 noitadilosnoC21111 noitadilosnoC/noitcelloC
D9D
800 dexiF
D7
0 noitideoN1 puorgybgnitidE2 tnemtrapedybgnitidE3 tnemtrapedbusybgnitidE4 retcarahcredroybgnitidE
D6
0 noitcartxeoN1 )selasoreZ(evitcanI4 kcotsfotuO
D5
0 noitacifissalcoN3 KRELC
D4
0 edomXninoitucexE1 edomZninoitucexE
D3
0 aerayliadgniussI1 aera1cidoirepgniussI2 aera2cidoirepgniussI
D2D
190~00 01~1troperhctaB
11 rezilatotdexiF21 noitcnufeerF41 ULP46 kcotsULP31 tnemtrapedbuS51 tnemtrapeD61 puorG71 krelC91 enozemiT02 ylhtnoM22 nosaerdioV82 sisylanaelbaT85 yromemlanruoJ13 metiylruoH15 hctaM&xiM
3-4-2. X/Z collection/consolidation
X/Z collection/consolidation execution
In-line X/Z mode → D14D13D12D11D10D9D8D7D6D5D4D3D2D1 <#-2> → <ESC>
Meaning of the command data
113QT-2000 Reference Manual
tigiD eulaV gninaeM
D41
D~01
05000 dnesmargorP15000 eviecermargorP
D9D
8
00 lanimretllA23~10 lanimretlaudividnifoDIlanimreT
D7
D~5
000 eulavdexiF
D4
D~1
nnn0 .oNeliF:nnn0900 atadnoitacollaelifhtiwselifllA2900 atadnoitacollaeliftuohtiwselifllA4001 ecirptinuULP4501 ecirptinudn2ULP
tigiD eulaV gninaeM
D4D
3
00 lanimretllA23~10 lanimretlaudividnifoDIlanimreT
D2D
1
01 norewopetomeR11 fforewopetomeR
3-4-3. Backup/restore the program data
Backup/restore the program data execution
Auto-program mode → D14D13D12D11D10D9D8D7D6D5D4D3D2D1 <#-2>
Meaning of the command data
3-4-4. Remote power control
Remote power control execution
Manager mode → D4D3D2D1 <#-2>
Meaning of the command data
114
Manager Operation
RS-232C Com1
RS-232C Com3
Slip printer port
RS-232C Com2
Drawer cable
Infrared port
In-line(white)
KP In-line (red)
Bottom view
Side view
RS-232C COM3
3-5. Data Communication System
The following details the in-line and on-line data communication functions available withthe QT-2000 system.
3-5-1. In/on-line connectors
With the QT-2000, there are the following in/on-line connectors in the bottom side andright side of the body.
In-line (Standard)KP-in-line (Standard)RS-232C Com1 (Standard) For Hand held scanner (HHS-9)RS-232C Com2 (Standard) For R/J printer (UP-350/SA-3015)RS-232C Com3 (Standard) For MODEM or PC direct connectionInfrared port (Standard)
115QT-2000 Reference Manual
QT2000-nQT2000-3QT2000-2QT2000-1
Slip
PC In-line cable
R/J R/J
R/J R/J R/J R/J R/J R/JPRN (1) PRN (2) PRN (1) PRN (2) PRN (1) PRN (2)
PRN (1) PRN (2)
noitacinummocenil-nI)etarduab(deeps
noitcennocmumixaMtinu
htgnelelbacmumixaM
spbM52.1 8 68spbk526 21 002spbk5.213 02 034spbk52.651 23 098
3-5-2. Hardware interface
With the QT-2000, there are the following in/on-line connectors in the bottom side andright side of the body.
3-5-2-1. In-line interface1) In-line connection diagram
The maximum in-line cable length and the maximum connection unit will be varied bythe in-line communication speed as shown below list.
2) ConnectionMulti drop
116
Manager Operation
QT-2000 (Com3) MODEM
Signal
name
SD/TXD
RD/RXD
RS/RTS
CS/CTS
CD/DCD
ER/DTR
DR/DSR
CI/RI
GND
Pin
No.
3
2
7
8
1
4
6
9
5
Signal
name
SD
RD
RS
CS
CD
ER
DR
CI
GND
Pin
No.
2
3
4
5
8
20
6
22
7
(DSUB25)
QT-2000 (Com3) PC
Signal
name
SD/TXD
RD/RXD
RS/RTS
CS/CTS
CD/DCD
ER/DTR
DR/DSR
CI/RI
GND
Pin
No.
3
2
7
8
1
4
6
9
5
Signal
name
SD
RD
RS
CS
CD
ER
DR
CI
GND
Pin
No.
3
2
7
8
1
4
6
5
(DSUB9)
Pin
No.
2
3
4
5
8
20
6
22
7
(DSUB25)
3-5-2-2. On-line interfaceOnly the RS-232C Com3 port can be connected with a modem or personal computer.
1) Specification of RS-232C Com3 portCommunication method: Half duplex communicationConfiguration of connection: Point-to pointLine type: Public lines/exclusive linesStarting method: Center (host computer) based start upProtocol: Async.Communication speed: 1200/2400/4800/9600/19200 bpsError control: CRC-128 or CRC-1024Text length: 128 or 1024 bytes
2) The cable diagram between QT-2000 and MODEM
3) The cable diagram between QT-2000 and PC
117QT-2000 Reference Manual
3-5-3. In/On-line functions
3-5-3-1. In-line functionsThe list below shows the main functions available with the QT-2000 system. Power on/off is automatically performed for terminals whose mode is in the OFF mode when thosefunctions are performed.
1) X/Z data collection for each terminal2) X/Z data consolidation for each terminal3) X/Z data collection/consolidation for each terminal4) Program data copy and upload between terminals (auto-program function)
Functions 1), 2) and 3) can only be performed from a terminal that is programmed as masterin which consolidation files are allocated.
3-5-3-2. On-line functionsThe QT-2000 can be controlled from the personal computer by connecting it to RS-232Cport 3 (Com3).Power on/off is automatically performed for terminals whose mode is in the OFF modewhen those functions are performed.
118
Manager Operation
3-6. Collection/Consolidation system
This section provides the general description of the data collection/consolidation systemof the QT-2000. The collection/consolidation system is managed by the master/satellitesystem using in-line network. Installation of any special hardware devices is not requiredfor collection/consolidation as in-line interfaces are standard feature. Communication ispossible with the connection of in-line cable.In this section, the term “master” means a terminal which collects or consolidates dataregistered on each terminal (called “satellite”) connected the in-line.The differences between collection and consolidation are as follows.
– CollectionOutputs the data of the master and individual satellite terminals from the master terminal.If the master's receipt/journal printer is specified as a report printer, the data is printed outby each specified terminal. The total values for the data of each terminal are not output.
– ConsolidationTotals data from the master and satellites, and then output it to a specific device. Outputfor individual terminals is not performed when consolidation is specified.
Types of totalizer files
There are following seven types of totalizer files:
– Daily total filesDaily total files accumulate registered data.
– Periodic total 1 filesThese files accumulate registered data, and can be reset separately from the daily total files.Therefore, the total data within specific period can be accessed by using these files.
– Periodic total 2 filesThese files have same functions as the periodic total 1 files, but can accumulate the periodictotal data within different period.
– Daily consolidation filesThese are files to consolidate the daily data.
– Periodic total 1 consolidation filesThese are files to consolidate the periodic 1 data.
– Periodic total 2 consolidation filesThese are files to consolidate the periodic 2 data.
– Consolidation work files
These files are work files to consolidate the data of daily total, periodic total 1 or periodictotal 2 files.
The daily consolidation files, periodic total 1 consolidation files, periodic total 2 consoli-dation files and consolidation work files must be reserved as work files at the masterterminal during collection/consolidation operations.
NOTE:Only a file with the same number of records as the records of corresponding files need tobe reserved. For example, if the number of department is 50, then the same number, 50records, should be reserved for department of other types.
119QT-2000 Reference Manual
noitpircsedeliFseliflanimreT selifnoitadilosnoC
noitadilosnoCkrowlatotyliaD
1cidoirePlatot
2cidoirePlatot
yliaDnoitadilosnoc
1cidoirePnoitadilosnoc
2cidoirePnoitadilosnoc
rezilatotdexiF 100 101 102 103 104 105 106
yeknoitcasnarT 200 201 202 203 204 205 206
tnemtrapedbuS 300 301 302 303 304 305 306
ULP 400 401 402 403 404 405 406
tnemtrapeD 500 501 502 503 504 505 506
puorG 600 601 602 603 604 605 606
liatedkrelC 110 111 112 113 114 115 116
selasylruoH 900 901 902 903 904 905 906
selasylhtnoM 010 011 012 013 014 015 016
elbatdioV 210 211 212 213 214 215 216
sisylanaelbaT 810 811 812 813 814 815 816
latotdnarG 020 021 022 023 024 025 026
File description and number list
120
Manager Operation
Satellite Master
Terminalfiles
Terminalfiles
Consolidationwork
1
2
3
2
Satellite Master
Terminalfiles
Terminalfiles
Consolidationwork
1, 4
2
3
2
3-6-1. X/Z collection
This is used when it is desirable to obtain the counters and totals of the individual terminals.Normally, collection, rather than consolidation should be used for Z (reset).For collection results (normal end or error end), the satellite does not print it out on thereceipt/journal during X collection. But the results of the Z collection are printed out in thejournal during Z collection.Details can be printed out on the receipt/journal of any terminal, as well as the masterterminal, in accordance with the program.
3-6-1-1. X collection processing
X collection processing is performed as the figure shown below.1 An X collection command is started up from the master terminal.2 The terminals send their report data to the consolidation work file of the master.3 Report data from the satellite's terminal file are printed out on the master's R/J printer
or displayed on the master terminal's LCD.4 After the master terminal's processing completes, the same processes described in the
item 1 to 3 are executed for the other terminals. Data will be sent without the clerknoticing, even when the satellite in the process of registering.
3-6-1-2. Z collection processingZ collection processing is performed as the figure shown below.
1When a Z collection command is started up from the master terminal, the master firstlocks an objected terminal.
2 The reports are printed out on the satellite if programmed, and then the terminals sendtheir report data to the consolidation work file of the master terminal.
3 Report data from the satellite's terminal file are printed out on the master's R/J printeror displayed on the master's LCD.
4 The data of satellite's terminal file are cleared, and then the Z lock of the satelliteterminal is released.
5 After the master terminal's processing completes, the same processes described in theitem 1 to 4 are executed for the other terminal.
NOTE:• When a Z collection is performed, the consolidation data cannot be output. If output of
consolidation data is desired, perform “collection/consolidation” processing describedlater.
• Even if an error is occurred, or if the processing is terminated, the data to be collectedremains as they are, and Z lock statuses are automatically released.
121QT-2000 Reference Manual
3-6-1-3. X/Z collection command execution
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign In-line X/Z.
3. Select “1.Collection” and press the <YES> key.
4. Select the types and kinds you want to collect.(Please refer to the X/Z report chapter about the report typesand kinds.)
5. Select the target terminal(s).In case of selecting individual terminal(s), press the <ESC>key when you finish to designate terminal(s).
6. Press the <ESC> key twice to terminate this process.
0.00
X/Z C01 15-12-97 12:34 000000
Inline X/Z 1.Collection 2.Consolidation 3.Collection & Consolidation
0.00
Collection
Collection 1.Daily X 2.Periodic(1) X 3.Periodic(2) X 4.Daily Z 5.Periodic(1) Z 6.Periodic(2) Z
0.00
Collection
Daily X 1.Batch 2.Cashier/Clerk 3.Others
0.00
Collection
Target ECR 1.All 2.Terminal A #01 3.Terminal B #02 4.Terminal C --- 5.Terminal D #04 6.Terminal E #05 7.Terminal F #06 8.Terminal G #07
– Selected terminal<
0.00
Batch (1)Inline 11110Collection 0000000MC #01 12:30MC #02 12:32MC #03 Error End 0001MC #04 12:40
122
Manager Operation
Satellite Master
Terminalfiles
Terminalfiles
Consolidationfiles
Consolidationwork
1
2
3
25
Satellite Master
Terminalfiles
Terminalfiles
Consolidationfiles
Consolidationwork
1, 6
2
3
25
3-6-2. X/Z consolidation
This is used when it is desirable to obtain the counters and totals of all terminals in the store.After consolidating data from all specified terminals, the master prints the details on thereceipt/journal printer.Regardless of whether they are in the process of registration, the satellite terminals senddata and do not print out the reports, when X consolidation is performed. But, during theZ consolidation, satellites are locked from registrations, and reports can be printed out onthe receipt/journal of a terminal in accordance with the program.
3-6-2-1. X consolidation processingX consolidation processing is performed as the figure shown below.
1 An X consolidation command is started up from the master terminal.2 Data of the satellite's terminal file are sent to the master terminal, and are copied to the
consolidation work file.3 The data in the consolidation work file is added to the consolidation file.4 The same process described in item 1 to 3 is executed for other terminal.5 After the above collection processing is completed for all terminals, the data accumu-
lated in the consolidation work file are reported on the master's R/J printer.
3-6-2-2. Z consolidation processingZ consolidation processing is performed as the figure shown below.
1 A Z consolidation command is started up from the master terminal.The master first locks an objected terminal. If reporting on the satellite is programmed,the reports are printed out on the satellite R/J printer.
2 Data of the satellite's terminal files are sent to the master terminal, and are copied to theconsolidation work file.
3 The data in the consolidation work file is added to the consolidation file.4 After the master terminal's processing completes, the same processes described in item1 to 3 are executed for all other terminal.
5 The data accumulated in the consolidation file are reported on the master's R/J printer.6 After the above collection processing completes for all terminals, the files of all satellite
terminals are cleared, and then satellite's Z lock statuses are released.
123QT-2000 Reference Manual
NOTE:• Even if an error is occurred, or if the processing is terminated, the data to be collected
remains as they are, and Z lock statuses are automatically released. Therefore, retryingthe same operation can be performed.
3-6-2-3. X/Z consolidation command execution1. Sign on a clerk (if necessary).2. Press <X/Z MODE> repeatedly to assign In-line X/Z.
3. Select “2.Consolidation” and press the <YES> key.
4. Select the types and kinds you want to collect.(Please refer to the X/Z report chapter about the report typesand kinds.)
5. Select the target terminal.In case of selecting individual terminal(s), press the <ESC>key when you finish to designate terminal(s).
6. Press the <ESC> key twice to terminate this process.
0.00
X/Z C01 15-12-97 12:34 000000
Inline X/Z 1.Collection 2.Consolidation 3.Collection & Consolidation
0.00
Consolidation
Consolidation 1.Daily X 2.Periodic(1) X 3.Periodic(2) X 4.Daily Z 5.Periodic(1) Z 6.Periodic(2) Z
0.00
Consolidation
Daily X 1.Batch 2.Cashier/Clerk 3.Others
0.00
Consolidation
Target ECR 1.All 2.Terminal A #01 3.Terminal B #02 4.Terminal C --- 5.Terminal D #04 6.Terminal E #05 7.Terminal F #06 8.Terminal G #07
– Selected terminal<
0.00
Batch (1)Inline 11111Consolidation 0000000MC #01 12:30MC #02 12:32MC #03 Error End 0001MC #04 12:40
124
Manager Operation
Satellite Master
Terminalfiles
Terminalfiles
Consolidationfiles
Consolidationwork
1
2
4
23
6
3-6-3. X/Z collection/consolidation
This is used when it is desirable to obtain the counters and totals of the individual terminals(collection) and of all terminals in the store (consolidation) by one procedure. Afterprinting reports of all specified terminals on the master's receipt/journal printer, the masterprints the consolidation report. Regardless whether they are in the process of registration,the satellite terminals are send data and do not print out the reports, when X/Z collection/consolidation is performed. But, during the Z collection/consolidation, satellites arelocked from registrations, and reports can be printed out on the receipt/journal of a terminalin accordance with the program.After consolidating data from all specified terminals, the master prints the details on thereceipt/journal printer.
3-6-2-1. X collection/consolidation processing
X collection/consolidation processing is performed as the figure shown below.
1 An X collection/consolidation command is started up from the master terminal.2 Data of the satellite's terminal file are sent to the master terminal, and are copied to the
consolidation work file.3 The data in the consolidation work file is reported on the master's R/J printer.4 The data in the consolidation work file is added to the consolidation file.5 The same process described in item 1 to 4 is executed for other terminal.6 After the above collection processing is completed for all terminals, the data accumu-
lated in the consolidation file are reported on the master's R/J printer.
125QT-2000 Reference Manual
Satellite Master
Terminalfiles
Terminalfiles
Consolidationfiles
Consolidationwork
1, 7
2
4
23
6
3-6-3-2. Z collection/consolidation processingZ collection/consolidation processing is performed as the figure shown below.
1 A Z collection/consolidation command is started up from the master terminal.The master first locks an objected terminal.The satellite send their report data to the master, and the data are printed out on themaster's R/J printer.
2 Data of the satellite's terminal file are sent to the master terminal, and are copied to theconsolidation work file.
3 The data in the consolidation work file are reported on the master's R/J printer.4 The data in the consolidation work file is added to the consolidation file.5 After the master terminal's processing completes, the same processes described in item1 to 4 are executed for all other terminal.
6 The data accumulated in the consolidation file are reported on the master's R/J printer.7 After the above collection processing completes for all terminals, the files of all satellite
terminals are cleared, and then satellite's Z lock statuses are released.
NOTE:• Even if an error is occurred, or if the processing is terminated, the data to be collected
remains as they are, and Z lock statuses are automatically released. Therefore, retryingthe same operation can be performed.
126
Manager Operation
0.00
Collection&Consolidation
Target ECR 1.All 2.Terminal A #01 3.Terminal B #02 4.Terminal C --- 5.Terminal D #04 6.Terminal E #05 7.Terminal F #06 8.Terminal G #07
– Selected terminal<
0.00
X/Z C01 15-12-97 12:34 000000
Inline X/Z 1.Collection 2.Consolidation 3.Collection & Consolidation
0.00
Collection&Consolidation
Collection&Consolidation 1.Daily X 2.Periodic(1) X 3.Periodic(2) X 4.Daily Z 5.Periodic(1) Z 6.Periodic(2) Z
0.00
Collection&Consolidation
Daily X 1.Batch 2.Cashier/Clerk 3.Others
0.00
Batch (1)Inline 11112Collection&Consl 0000000MC #01 12:30MC #02 12:32MC #03 Error End 0001MC #04 12:40
3-6-2-3. X/Z collection/consolidation command execution1. Sign on a clerk (if necessary).2. Press the <X/Z MODE> key repeatedly to assign In-line
X/Z.
3. Select “3.Collection & Consolidation” and press the <YES>key.
4. Select the types and kinds you want to collect.(Please refer to the X/Z report chapter about the report typesand kinds.)
5. Select the target terminal.In case of selecting individual terminal(s), press the <ESC>key when you finish to designate terminal(s).
6. Press the <ESC> key twice to terminate this process.
127QT-2000 Reference Manual
3-7. Auto-programming function
Using the auto programming function makes it possible to save and load the terminalprogram files. Methods available for saving the terminal program are as follows:
1) Saving another terminal connected through in-line.2) Saving onto a personal computer connected through on-line or by Ir port.
To ensure quick recovery from a corrupted file resulting from user error or system failure,it is recommended that you maintain back up copies of current terminal programs on a filebasis.Terminal program files can be loaded using procedures opposite to those used for saving.
Note:Data except for program data, such as data in totalizers, counters, and work area, cannotbe saved by the auto programming function.
3-7-1. Auto programming functions
The QT-2000 terminal is capable of saving and loading terminal program files. Theterminal program file has the following transfer functions:
1) Copy all terminal files(send: activation by source terminal/receive: activation by target terminal)This function copies all terminal files (except system work files and terminal ID) withcounters and totalizers. When a file is not reserved on the target terminal, the processingfor that file is skipped.
2) Copy all terminal program files (send/receive)This function copies all terminal files (except system work files and terminal ID)without counters and totalizers. When a file is not reserved on the target terminal, theprocessing for that file is skipped.
3) Copy individual terminal program files (send/receive)This function copies the specific terminal program file (except system work files)without counters and totalizers.
4) Copy unit price field of particular files (send/receive)This function copies the unit price field of specific files (i.e. PLU, PLU 2nd@).
5) Copy application programs to flash memory: IPL (†send)This function copies the application programs to flash memory.
† The target terminal should be in the IPL mode. (refer to page 99)
128
Manager Operation
3-7-2. Auto program operation
The procedures of auto program function
1. Sign on a clerk (if necessary)2. Press the <X/Z Mode> key repeatedly to assign “AUTO
PGM.”
3. Select the appropriate menu you want by following theguidance. The hierarchy of the AUTO PGM menus aredescribed below.
Auto-program menu hierarchy
Send Copy All
Unit Price only
Range
Individual Files
All DataAll PGMPLUPLU 2nd@PLUPLU 2nd@Fixed TotalizerFree FunctionSub DepartmentPLUDepartmentGroup CharacterCashier/ClerkVoidTable AnalysisGT CharacterGeneral FeatureSpecial CharacterReport HeaderTax TablePulldown GroupSet Menu TableBatch X/ZClerk DetailHourly Item LinkReceipt/SLIP MsgARG GP1ARG GP2ARG GP3ARG GP4ARG GP5Text RecallCheck PrintGraphic LogoPLU 2nd@SchedulerOrder Char LinkKeyboardTime ZoneEmployeeJob CodeScheduleIDC LinkSystem ConnectionI/O ParameterPrinter Connection
Receive Copy All
Unit Price only
Range
Individual Files
All DataAll PGMPLUPLU 2nd@PLUPLU 2nd@Fixed TotalizerFree FunctionSub DepartmentPLUDepartmentGroup CharacterCashier/ClerkVoidTable AnalysisGT CharacterGeneral FeatureSpecial CharacterReport HeaderTax TablePulldown GroupSet Menu TableBatch X/ZClerk DetailHourly Item LinkReceipt/SLIP MsgARG GP1ARG GP2ARG GP3ARG GP4ARG GP5Text RecallCheck PrintGraphic LogoPLU 2nd@SchedulerOrder Char LinkKeyboardTime ZoneEmployeeJob CodeScheduleIDC LinkSystem ConnectionI/O ParameterPrinter Connection
IPL
0.00
X/Z C01 15-12-97 12:34 000000
AUTO PGM 1.Send 2.Receive
129QT-2000 Reference Manual
3-8. Command receive function
This menu is used for receiving commands from PC (IBM ThinkPad™) via Ir port.Executing this menu activates Ir port to receive command (for program uploading/downloading, X/Z collecting).
3-8-1. Command receiving procedure
1. Sign on a clerk (if necessary)2. Press the <X/Z Mode> key repeatedly to assign “Command
Receive.”
3. Press the <YES> key to proceed the step.
4. Bring Ir port of PC closely to the Ir port of QT-2000 and pressthe <YES> key to proceed.
5. Run PC application and wait. (the communication iconflashing).
0.00
X/Z C01 15-12-97 12:34 000000
Command Receive 1.Command wait
Command Receive
Ready? YES
131QT-2000 Reference Manual
4. Registrations ............................................................................................ 1324-1. Clerk sign on/off operation .................................................................................. 1324-2. Voiding the last registered item (<VOID> key operation) .................................... 1334-3. Voiding the previous registered item (<VOID> key operation) ............................ 1344-4. Cancelling of all data registered during the transaction ...................................... 1344-5. Using the LIST function ....................................................................................... 1364-6. Using the Set Menu function and Pulldown group function ................................. 1374-7. Separate check ................................................................................................... 1404-8. Open check ......................................................................................................... 1414-9. Media Change ..................................................................................................... 1424-10. Eat-in/Take-out .................................................................................................... 143
132
Registration
C01
REG C01 15-12-97 12:34 000001
REG Mode
REG 15-12-97 12:34 000001
Please Sign on.0.00
CLK# ----
REG 15-12-97 12:34 000001
Please Sign on.
CLK# --**
REG 15-12-97 12:34 000001
Please Sign on.
4. Registrations
This section describes characteristic registrations of the QT-2000.
4-1. Clerk sign on/off operation
The following examples illustrate the clerk sign on/off operation. When a clerk ID numberis programmed for the clerk key, sign on operation can be performed by merely pressingthe clerk key.It is the same procedure that even clerks are assigned as “clerk”, “cashier” or “manager.”
1) Clerk sign on operation (Clerk key has the clerk number setting.)
1. Just press the appropriate <CLERK> key.
2) Clerk sign on operation (Clerk key has no clerk number setting.)In case of the store has many clerks to control, you need not allocate all clerk keys on thekeyboard but allocate a few clerk key and program no clerk number one of the clerk key.
1. Press the <CLERK> key, if you want to display no clerknumber entries.
2. Enter the appropriate clerk number and press the <CLERK>key.
133QT-2000 Reference Manual
3) Clerk sign off operation
1. Enter “0” and press the <CLERK> key.
4-2. Voiding the last registered item (<VOID> key operation)
Use the <VOID> key to cancel a data that has just been registered using a function key. The<VOID> key can be used to cancel data registered using departments, subdepartments,PLUs, partial tenders, or the <PRICE>, <+>, <–>, <%+>, <%–>, <LOAN> or <PICKUP>key. You can only use the <VOID> key to cancel a registration if you have not yet startedregistration of the next item.
1. Wrong registration is made.
2. Press the <VOID> key to cancel the data and reregister thetransaction.
REG C01 15-12-97 12:34 000001
Please Sign on.0.00
%- -0.101 ST •0.90
REG C01 15-12-97 12:34 000001 1 PLU0001 •1.00 10% %- -0.10
VOID •0.101 ST •1.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •1.00
134
Registration
4-3. Voiding the previous registered item (<VOID> key operation)
If data has been registered using a function key and registration of the next item has begun,use the <VOID> key to cancel previous registered data. Entries using departments,subdepartments or PLUs can be cancelled using the <VOID> key.
1. Wrong registration is made.
2. Press the upper/lower arrow key to designate the item regis-tration.
3. Press the <VOID> key to cancel the item and reregister thetransaction.
4-4. Cancelling of all data registered during the transaction
Press the <CANCEL> key to cancel all data registered (except partial tendering) duringthe transaction. This operation lets you clear registered data and restart from the beginning.The cancel operation must be performed before the transaction is finalized.
1. Wrong registration is made.
PLU0004 •4.006 ST •16.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •1.00 1 PLU0002 •2.00 3 PLU0003 •9.00 1 PLU0004 •4.00
PLU0004 •4.006 ST •16.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •1.00 1 PLU0002 •2.00 3 PLU0003 •9.00 1 PLU0004 •4.00
PLU0003 -9.003 ST •7.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •1.00 1 PLU0002 •2.00 1 PLU0004 •4.00
PLU0004 •4.006 ST •16.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •1.00 1 PLU0002 •2.00 3 PLU0003 •9.00 1 PLU0004 •4.00
135QT-2000 Reference Manual
2. Press the <CANCEL> key.
3. Press the <YES> key to cancel the transaction.
CANCEL 0.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •1.00 1 PLU0002 •2.00 3 PLU0003 •9.00 1 PLU0004 •4.00 CANCEL •••••••••••••
Please Sign on.
PLU0004 •4.006 ST •16.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •1.00 1 PLU0002 •2.00 3 PLU0003 •9.00 1 Cancel OK?
136
Registration
4-5. Using the LIST function
0.01
REG C01 15-12-97 12:34 000001
LIST01 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004
PLU0001 •10.001 ST •10.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00
PLU0001 •10.001 ST •10.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00
<List> or No. <List-#>↓
PLU 1PLU 2PLU 3
← Select one of these←←
Before using the LIST function, the following programs are necessary to use this function.
1) Allocating the <LIST> key or the <LIST-#> key (page 24 of the programming manual)In case of using the <LIST> key, <LIST> key(s) should be allocated on the keyboardbefore step 2.
2) Programming pulldown group (page 32 of the programming manual)3) Programming item price (page 151 of the programming manual)
Normal registration by using the <LIST> and <LIST-#> key
1. Press the <LIST> key or enter the list No. and press the<LIST-#> key.
2. Select the appropriate item and press the <YES> key.
Direct selection by using the <LIST> key
1. Press the appropriate record number and press the <LIST>key brings direct selection of the item.
137QT-2000 Reference Manual
Before using the pulldown group function, the following programs are necessary to use thisfunction.
1) Programming pulldown group table (page 32 of the programming manual)2) Programming PLU “List Link No.” (page 106 of the programming manual)3) Programming item prices (page 151 of the programming manual)
1. Register the parent (main) PLU. The list linked appears.2. Select the appropriate (child/grandchild) PLU and press the
<YES> key.
PLU0012 •1.002 ST •11.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00 PLU0012 •1.00 PLU0012
4-6. Using the Set Menu function and Pulldown group function
4-6-1. Using the Set Menu function
Before using the set menu function, the following programs are necessary to use thisfunction.
1) Programming set menu table (page 34 of the programming manual)2) Programming PLU “Set menu table linking” (page 106 of the programming manual)3) Programming item prices (page 151 of the programming manual)
1. Registering a PLU linked to a set menu.
4-6-2. Using the Pulldown group function
PLU0001 •10.001 ST •10.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00 PLU0002 PLU0003 PLU0004 } Set Menu linked to PLU0001
PLU0001 •10.001 ST •10.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00
LIST01 1.PLU0010 2.PLU0011 3.PLU0012 4.PLU0013
PLU0012 •1.002 ST •11.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00 PLU0012 •1.00
PLU (Parent) registration
↓Child PLU 1Child PLU 2Child PLU 3
← Select one of these←←
138
Registration
PLU0001 •10.001 ST •10.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00 PLU0002
LIST01 1.PLU0010 2.PLU0011 3.PLU0012 4.PLU0013
– Set Menu linked to PLU0001<
PLU0010 •1.002 ST •11.00
REG C01 15-12-97 12:34 000001 1 PLU0001 •10.00 PLU0002 PLU0003 PLU0004 PLU0005 PLU0010
} Set Menu linked to PLU0001
–Selected in the LIST01 <<–Condiment/Preparation linked to PLU0004
0.01
REG C01 15-12-97 12:34 000001 1 PLU0020 •10.00 1 PLU0021 •20.00
LIST01 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004
4-6-3. Using the Set menu and Pulldown group functionBefore using the set menu and pulldown group function, the following programs arenecessary to use this function.1) Programming set menu table (page 34 of the programming manual)2) Programming pulldown group table (page 32 of the programming manual)3) Allocate the pulldown menu key, if you want to use. (page 24 of the programming
manual)4) Programming PLU “Set menu table linking” and “List Link No.” (page 106 of the
programming manual)5) Programming item prices (page151 of the programming manual)
1.Registering a PLU linked to a set menu and pulldown group.
2. Select the appropriate item and press the <YES> key.If there are more pulldown groups linked to the PLU, nextpulldown group or a PLU appears on the screen.You can also select items directly by using the pulldown key.
4-6-4. Using the Substitution keyNormally, you can select item(s) in a pulldown group. If the customer requires to take anitem from the pulldown group, the <Substitution> key should be used.
1. A PLU linked to a pulldown group is registered, but no itemsin the list cannot be selected.
139QT-2000 Reference Manual
2. Press the <Substitution> key.
3. Register the appropriate item.
4-6-5. Inner multiplicationNormally, the quantity of list linked PLU or set menu child PLU follows the same quantityas main PLU. But it is possible to register a different number of list linked PLU or childPLU from the number of main PLU.Before using the inner multiplication, the following program is necessary in addition to thePulldown Group or Set Menu Table to use this function.
1) Programming “Set Menu/Condiment” program (page 51 of the programming manual)
1. An multiplication of a PLU is made.
2. Enter appropriate quantity and press the <X> key, after that,select the appropriate PLU (in case of pulldown group.)
0.00
REG C01 15-12-97 12:34 000001 1 PLU0020 •10.00 1 PLU0021 •20.00
PLU0050 •50.003 ST •80.00
REG C01 15-12-97 12:34 000001 1 PLU0020 •10.00 1 PLU0021 •20.00 1 PLU0050 •50.00
PLU0001 •30.003 ST •30.00
REG C01 15-12-97 12:34 000001 3 PLU0001 •30.00
LIST01 1.PLU0010 2.PLU0011 3.PLU0012 4.PLU0013
X 23 ST •30.00
REG C01 15-12-97 12:34 000001 3 PLU0001 •30.00
LIST01 1.PLU0010 2.PLU0011 3.PLU0012 4.PLU0013
140
Registration
3. Enter appropriate quantity and press the <X> key, after that,select the appropriate PLU (in case of pulldown group.)
4-7. Separate check
Separate check is used to transfer the registered items in the original check to the othercheck or pick up the registered items in the original check to finalize them.
1. Enter the check number to which the registered items aretransferred and press the <NEW/OLD CHK> key.
2. Enter the original check number and press the <Separatecheck> key.
3. Select the transferring items and press the <YES> key.
PLU0010 •2.005 ST •32.00
REG C01 15-12-97 12:34 000001 3 PLU0001 •30.00 2 PLU0010 •2.00
LIST01 1.PLU0010 2.PLU0011 3.PLU0012 4.PLU0013
NEW/OLD 222222
REG C01 15-12-97 12:34 000001CHECH No.222222
0.005 ST 15.00
SEP CHKCHECH No.123456 1CT 1 PLU0001 •1.00 1 PLU0002 •2.00 1 PLU0003 •3.00 1 PLU0004 •4.00 1 PLU0005 •5.00
0.005 ST 15.00
SEP CHKCHECH No.123456 1CT 1 PLU0001 •1.00 1 PLU0002 •2.00 1 PLU0003 •3.00 1 PLU0004 •4.00 1 PLU0005 •5.00
141QT-2000 Reference Manual
4. After selecting items, press the <ESC> key to terminate. Theselected items are transferred to other check.
4-8. Open check
To display or print out the opened check report of the signed on operator.
1. Enter the signed on clerk record number.2. Press the <OPEN CHK> key.3. The open check report is issued or displayed (depends on the
program).
0.01
REG C01 15-12-97 12:34 000001X 0020025 OPEN CHK 123
Machine#0001REG C01 15-12-97 10:04 001029Check No.001245 12CT #000121 •100.35
Machine#0002REG C04 15-12-97 12:31 001186Check No.001328 2CT #000226 •123.35
0.01
REG C01 15-12-97 12:34 000001
0.002 ST •9.00
REG C01 15-12-97 12:34 000001CHECH No.222222 1 PLU0004 •4.00 1 PLU0005 •5.00 ST •9.00
142
Registration
4-9. Media Change
This key is used to change media in drawer amounts. Pressing this key begins media changeoperation.
1. First press the <Media Change> key.
2. Enter the in drawer amount to be changed and press the mediakey to be changed.
3. Enter the amount to change and press the media to change,until the change amount equals to the changed amount.
MEDIA CHG
REG C01 15-12-97 12:34 000001
CASH -10.00ST •10.00
REG C01 15-12-97 12:34 000001 MEDIA CHG •••••••••••• CASH -10.00
CHECK •2.00ST •8.00
REG C01 15-12-97 12:34 000001 MEDIA CHG •••••••••••• CASH -10.00 CHECK •2.00
CREDIT •8.00
REG C01 15-12-97 12:34 000001 MEDIA CHG •••••••••••• CASH -10.00 CHECK •2.00 CREDIT •8.00
143QT-2000 Reference Manual
4-10. Eat-in/Take-out
This function is used for specifying if the customer eat in the restaurant or take-out.When the <EAT-IN> and <Take-out> keys are pressed before counting the sum total, theEat-in/Take-out compulsory run, and the tax exemption will be applied.After pressing these keys, it is impossible to total the sum except void, cancel, sub-total,change and part payment (including sub-total according to the currency conversion.) If youwant to clear the compulsory, press the <OPEN 2> key.Be sure to program before using this function.
Example of receipt image
1 Hamburger $2.00 1 French fries $1.50 1 Coffee $1.00 TAKE-OUT
145QT-2000 Reference Manual
5. Refund mode operation........................................................................... 1465-1. Selecting RF or REG– Mode .......................................................................... 146
146
Refund Mode
5. Refund mode operation
The general procedure for entering the RF or REG– mode is as follows.
5-1. Selecting RF or REG– Mode
After sign on operation, pressing the <REG. MODE> key turns the mode to RF Mode andREG– Mode.Refund registration or register minus (REG–) registration starts with this operation.
C01
REG C01 15-12-97 12:34 000001
REG Mode
REG 15-12-97 12:34 000001
Please Sign on.0.00
C01
RF C01 15-12-97 12:34 000001
REFUND Mode
C01
R- C01 15-12-97 12:34 000001
REG- Mode
Note: Key operations are similar to that in the register mode.
To avoid miss-registration in the RF or REG– mode, return the mode to the formerone immediately.
147QT-2000 Reference Manual
6. Read and reset operations ...................................................................... 1486-1. The procedures of reading or resetting ........................................................... 1486-2. Report sample................................................................................................. 149
148
Read and Reset
6. Read and reset operations
By setting the mode to the X or Z, the contents of totalizers and counters are enabled to read.The X mode allows report at any time during business hours. The Z mode is only performedat the end of the business day, since it clears the data stored to the totalizers and counters.
6-1. The procedures of reading or resetting
1. Sign on a clerk (if necessary).2. Press <X/Z MODE> to assign X/Z report.
3. Select the appropriate menu you want by following theguidances. The hierarchy of the X/Z menus are describedbelow.
Refer to page 111, 112 for X/Z command.
X/Z Report Daily X Cashier/Clerk IndividualAll
Open Check IndividualClerkAll
Only totalBatch Batch 1 ~ n (n = 1 ~ 10) (n: allocated batch number)J-MEMO All
Date & Consecutive numberOthers Individual key (Daily X/Z only)
Flash (Daily X only)Fixed totalizerFree FunctionPLUPLU stock (Daily X/Z only)SubdepartmentDepartmentGroupHourly salesMonthly salesTable analysisVoid
Hourly itemIDC (1) clear (Z only)IDC (2) clear (Z only)IDC (3) clear (Z only)
Periodic 1 X Cashier/Clerk Same as Daily XBatch Same as Daily XOthers Same as Daily X
Periodic 2 X Same as Periodic 1 XDaily Z Same as Daily XPeriodic 1 Z Same as Periodic 1 XPeriodic 2 Z Same as Periodic 2 XTime & Attendance Employee activity
EmployeeEmployee editHourly/Labor
0.00
X/Z C01 15-12-96 12:34 000000
X/Z Report 1.Daily X 2.Periodic(1) X 3.Periodic(2) X 4.Daily Z 5.Periodic(1) Z 6.Periodic(2) Z
149QT-2000 Reference Manual
6-2. Report sample
Cashier/clerk report
Z 0020017 CASHIER/CLERK 123 — Mode/Report code/Report title/Z No. (Z only)
C01 .......................1 — Clerk name/Clerk No.GROSS 35 •38.00 — Gross sales title/Gross counter/Gross totalizerNET No 10 •38.00 — Net sales title/Net counter/Net totalizerCAID •35.00 — Cash in drawer title/Cash in drawerCHID •3.00 — Charge in drawer title/Charge in drawerCKID •0.00 — Check in drawer title/Check in drawerCRID •0.00 — Credit in drawer title/Charge in drawerCASH No 10 •35.00 — Cash key descriptor/Counter/Totalizer
Individual key
X 0000095 — Mode/Report codeCASH No 11 •38.00 — Function key descriptor/Counter/TotalizerCHECK No 0 •0.00CREDIT No 1 •12.00ADD CHK No 0----------------------------------------TL 12 •50.00 — TL descriptor/Counter/Totalizer
Flash
X 0000071 FLASH — Mode/Report code/Report title
NET No 11 •38.00 — Net sales title/Net counter/Net totalizerCAID •35.00 — Cash in drawer title/Cash in drawerCHID •0.00 — Charge in drawer title/Charge in drawerCKID •0.00 — Check in drawer title/Check in drawerCRID •0.00 — Credit in drawer title/Charge in drawer
Fixed totalizer
Z 0000011 FIXED TTL 123 — Mode/Report code/Report title/Z No. (Z only)
GROSS 35 •38.00 — Gross sales title/Gross counter/Gross totalizerNET No 11 •38.00 — Net sales title/Net counter/Net totalizerCAID •35.00 — Cash in drawer title/Cash in drawerCHID •0.00 — Charge in drawer title/Charge in drawerCKID •0.00 — Check in drawer title/Check in drawerCRID •0.00 — Credit in drawer title/Credit in drawerRF No 2 •8.00 — Refund mode descriptor/Counter/TotalizerCOVER CT 2 — Customer count descriptor/CounterTA1 •0.00 — Taxable amount 1 descriptor/Taxable amount 1TX1 •0.00 — Tax 1 descriptor/Tax 1 amountTA2 •0.00 — Taxable amount 2 descriptor/Taxable amount 2TX2 •0.00 — Tax 2 descriptor/Tax 2 amountTA3 •0.00 — Taxable amount 3 descriptor/Taxable amount 3TX3 •0.00 — Tax 3 descriptor/Tax 3 amount
150
Read and Reset
Free function
Z 0000012 FREE FUNCTION 123 — Mode/Report code/Report title/Z No. (Z only)
CASH No 11 •38.00 — Function key descriptor/Counter/AmountRC No 2 •8.00PD No 1 •1.00
PLU
Z 0000014 PLU 123 — Mode/Report code/Report title/Z No. (Z only)
PLU0001 50 •682.55 — PLU descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) #0001 68.25% — PLU No. (can be skipped)/Sales ratio (can be skipped)PLU0002 25 •32.00 DISCOUNT •5.00 #0002 3.2%----------------------------------------TL 75 •714.55 DISCOUNT •6.00 71.45%
PLU (by range)
X 0010074 PLU — Mode/Report code/Report title/Z No. (Z only)#0001-#0002 — PLU range
PLU0001 50 •682.55 — PLU descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) #0001 68.25% — PLU No. (can be skipped)/Sales ratio (can be skipped)PLU0002 25 •32.00 DISCOUNT •5.00 #0002 3.2%----------------------------------------TL 75 •714.55 DISCOUNT •6.00 71.45%
PLU (by group/dept/subdept)
X 1000014 PLU — Mode/Report code/Report title/Z No. (Z only)
GROUP01 ......................01 — Group (dept/subdept) titlePLU0001 50 •682.55 — PLU descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) #0001 68.25% — PLU No. (can be skipped)/Sales ratio (can be skipped)PLU0002 25 •32.00 DISCOUNT •5.00 #0002 3.2%----------------------------------------TL 75 •714.55 — Total by group (dept/subdept)/Counter/Amount DISCOUNT •6.00 71.45%
GROUP02 ......................02
......................................00 — Non Group (dept/subdept) link titlePLU0005 1 •2.00
151QT-2000 Reference Manual
DISCOUNT •0.00 #0005 0.2%----------------------------------------TL 1 •2.00 DISCOUNT •0.00 0.2%
PLU (by order character)
X 4000014 PLU — Mode/Report code/Report title/Z No. (Z only)
ORDER01 ......................01 — Order titlePLU0001 50 •682.55 — PLU descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) #0001 68.25% — PLU No. (can be skipped)/Sales ratio (can be skipped)PLU0002 25 •32.00 DISCOUNT •5.00 #0002 3.2%----------------------------------------TL 75 •714.55 — Total by order/Counter/Amount DISCOUNT •6.00 71.45%
ORDER02 ......................02
......................................00 — Non order character link titlePLU0005 1 •2.00 DISCOUNT •0.00 #0005 0.2%----------------------------------------TL 1 •2.00 DISCOUNT •0.00 0.2%
PLU zero sales
X 0100014 PLU — Mode/Report code/Report title
PLU0001 0 •0.00 — PLU descriptor/Counter/Amount DISCOUNT •0.00 #001 0%PLU0002 0 •0.00
----------------------------------------TL 0 •0.00
152
Read and Reset
PLU zero sales (by group/dept/subdept/order)
X 1100074 PLU — Mode/Report code/Report title
GROUP01 ......................01 — Group (dept/subdept/order character) titlePLU0001 0 •0.00 — PLU descriptor/Counter/Amount DISCOUNT •0.00 #001 0%PLU0002 0 •0.00 :
GROUP02 ......................02
----------------------------------------TL 0 •0.00
PLU (by menu level)
X 0000081 PLU — Mode/Report code/Report title
PLU0001 50 •682.55 — PLU descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) #0001 68.25% — PLU No. (can be skipped)/Sales ratio (can be skipped)PLU0002 25 •32.00 DISCOUNT •5.00 #0002 3.2%----------------------------------------TL 75 •714.55 — Total by menu/Counter/Amount DISCOUNT •6.00 71.45%
PLU stock
X 0000064 PLU STOCK — Mode/Report code/Report title/Z No. (Z only)
PLU0001 10 123.45 — PLU descriptor/Optimum stock level/Current stockPLU0002 25 * 20 — * short stockPLU0003 1 100
:
PLU stock (by range)
X 0010064 PLU STOCK — Mode/Report code/Report title/Z No. (Z only)#0001-#0002 — Range
PLU0001 10 123.45 — PLU descriptor/Optimum stock level/Current stockPLU0002 25 * 20 — * short stockPLU0003 1 100
:
153QT-2000 Reference Manual
PLU stock (by group/dept/subdept/order)
X 2000064 PLU STOCK — Mode/Report code/Report title/Z No. (Z only)
GROUP01 ......................01 — Link group (dept/subdept/order) titlePLU0001 10 123.45 — PLU descriptor/Optimum stock level/Current stockPLU0002 25 * 20 — * short stockPLU0003 1 100
......................................00PLU0296 12 20
PLU less stock
X 0400064 PLU STOCK — Mode/Report code/Report title
PLU0001 10 * 0.45 — PLU descriptor/Optimum stock level/Current stockPLU0002 25 * 20 * short stockPLU0003 12 * 10
PLU less stock (by range)
X 1400064 PLU STOCK 123 — Mode/Report code/Report title#0001-#0002 — Range
PLU0001 10 * 0.45 — PLU descriptor/Optimum stock level/Current stockPLU0002 25 * 20 * short stockPLU0003 1 * -100
PLU less stock (by group/dept/subdept/order)
X 1400064 PLU STOCK 123 — Mode/Report code/Report title
GROUP01 ......................01 — Link group (dept/subdept/order) titlePLU0001 10 * -123.45 — PLU descriptor/Optimum stock level/Current stockPLU0002 25 * 20 * short stockPLU0003 1 * -100
......................................00PLU0296 12 * 2
154
Read and Reset
Subdepartment (all)
Z 0000013 SUB DEPT 123 — Mode/Report code/Report title/Z No. (Z only)
SUBDEPT01 24 •82.55 — Subdepartment descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) 70.82% — Sales ratio (can be skipped)SUBDEPT02 25 •32.00 DISCOUNT •2.00 27.45%
----------------------------------------TL 151 •156.55 DISCOUNT •3.00 100.00%
Subdepartment (by range)
X 0010013 SUB DEPT — Mode/Report code/Report title/Z No. (Z only)#0001-#0002 — Range
SUBDEPT01 24 •82.55 — Subdepartment descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) 70.82% — Sales ratio (can be skipped)SUBDEPT02 25 •32.00 DISCOUNT •2.00 27.45%----------------------------------------TL 49 •114.55 DISCOUNT •3.00 98.27%
Subdepartment (by group/dept)
X 1000013 SUB DEPT — Mode/Report code/Report title/Z No. (Z only)
GROUP01 ......................01 — Group descriptorSUBDEPT01 24 •82.55 — Subdepartment descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) 70.82% — Sales ratio (can be skipped)SUBDEPT02 25 •32.00 DISCOUNT •2.00 27.45%----------------------------------------TL 49 •114.55 DISCOUNT •3.00 98.27%
.....................................00 — No group linkSUBDEPT04 1 •1.00 DISCOUNT •0.00 0.87%----------------------------------------TL 1 •1.00 DISCOUNT •0.00 0.87%
155QT-2000 Reference Manual
Subdepartment zero sales
X 0100013 SUB DEPT — Mode/Report code/Report title
SUBDEPT03 0 •0.00 — Subdepartment descriptor/Counter/Amount DISCOUNT •0.00 — Discount total (can be skipped) 0% — Sales ratio (can be skipped)SUBDEPT04 0 •0.00 DISCOUNT •2.00 0%
----------------------------------------TL 0 •0.00 DISCOUNT •0.00 0%
Subdepartment zero sales (by group/dept)
X 1100013 SUB DEPT — Mode/Report code/Report title
GROUP01 ......................01 — Group descriptorSUBDEPT03 0 •0.00 — Subdepartment descriptor/Counter/Amount DISCOUNT •0.00 — Discount total (can be skipped) 0% — Sales ratio (can be skipped)SUBDEPT04 0 •0.00 DISCOUNT •2.00 0% ---------------------------------------TL 0 •0.00
.....................................00 — No group linkSUBDEPT08 0 •0.00 DISCOUNT •2.00 0%---------------------------------------TL 0 •0.00 DISCOUNT •0.00 0%
Department (all)
X 0000015 DEPT 123 — Mode/Report code/Report title/Z No. (Z only)
DEPT01 24 •82.55 — Department descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) 70.82% — Sales ratio (can be skipped)DEPT02 25 •32.00 DISCOUNT •2.00 27.45%
----------------------------------------TL 151 •156.55 DISCOUNT •3.00 100.00%
156
Read and Reset
Department (by range)
X 0000015 DEPT — Mode/Report code/Report title/Z No. (Z only)#0001-#0002 — Range
DEPT01 24 •82.55 — Department descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) 70.82% — Sales ratio (can be skipped)DEPT02 25 •32.00 DISCOUNT •2.00 27.45%----------------------------------------TL 49 •114.55 DISCOUNT •3.00 98.27%
Department (by group)
X 1000015 DEPT 123 — Mode/Report code/Report title/Z No. (Z only)
GROUP01 ......................01 — Group descriptorDEPT01 24 •82.55 — Department descriptor/Counter/Amount DISCOUNT •1.00 — Discount total (can be skipped) 70.82% — Sales ratio (can be skipped)DEPT02 25 •32.00 DISCOUNT •2.00 27.45%---------------------------------------TL 49 •114.55 DISCOUNT •3.00 98.27%
.....................................00 — No group linkDEPT04 1 •1.00 DISCOUNT •0.00 0.87%---------------------------------------TL 1 •1.00 DISCOUNT •0.00 0.87%
Department zero sales
X 0100015 DEPT — Mode/Report code/Report title
DEPT03 0 •0.00 — Department descriptor/Counter/Amount DISCOUNT •0.00 — Discount total (can be skipped) 0.00% — Sales ratio (can be skipped)DEPT02 0 •0.00 DISCOUNT •0.00 0.00%---------------------------------------TL 0 •0.00 DISCOUNT •0.00 0.00%
157QT-2000 Reference Manual
Department zero sales (by group)
X 1100015 DEPT — Mode/Report code/Report title
GROUP01 ......................01 — Group descriptorDEPT01 0 •0.00 — Department descriptor/Counter/Amount DISCOUNT •0.00 — Discount total (can be skipped) 0% — Sales ratio (can be skipped)DEPT02 0 •0.00 DISCOUNT •0.00 0%----------------------------------------TL 0 •0.00
.....................................00 — No group linkDEPT04 0 •0.00 DISCOUNT •0.00 0%----------------------------------------TL 0 •0.00 DISCOUNT •0.00 0%
Group
X 0000016 GROUP — Mode/Report code/Report title/Z No. (Z only)
GROUP01 6 •163.54 — Group descriptor/Counter/Amount 1.63% — Sales ratio (can be skipped)GROUP02 2 •2.55 0.02%----------------------------------------TL 8 •166.09 1.65%
Hourly sales
Z 0000019 HOURLY 123 — Mode/Report code/Report title/Z No. (Z only)
09:00->10:00 1 •63.54 — Time zone/Net counter/Net amount 1.63% — Sales ratio (can be skipped)
CT 1 •63.54 — Gross counter/Gross amount10:00->11:00 2 •122.55 3.52%
CT 2 •122.55
158
Read and Reset
Monthly sales
Z 0000020 MONTHLY 123 — Mode/Report code/Report title/Z No. (Z only)
7 ...... — Day of the monthGROSS 52 •680.57 — Gross counter/Gross amountNET No 12 •680.50 — Net counter/Net amount 8 ......GROSS 78 •1,034.59NET No 37 •1,034.57----------------------------------------TLGROSS 130 •1,715.16
•13.19 — Average gross salesNET 49 •1,715.07
•35.00 — Average net sales
Table analysis
Z 0000028 TABLE ANALYSIS 123 — Mode/Report code/Report title/Z No.
TBL0001 CT 12 •680.57 — Table No./Customer count/Net amount 50.12% — Sales ratio (can be skipped)TBL0002 CT 5 •279.56
----------------------------------------TL CT 28 •1,267.97
Void reason
Z 0000022 VOID REASON 123 — Mode/Report code/Report title/Z No. (Z only)
OPE ERR No 12 •80.50 — Void reason/Counter/AmountOUT OF DATE No 10 •40.42
No 0 •0.00
Open check
Z 0020025 OPEN CHK 123 — Mode/Report code/Report title/Z No. (Z only)
Machine#0001 — Latest machine No.REG C01 07-01-97 12:34 001029 — Mode/Clerk/Date/Time/Consecutive No.Check No. 001245 12CT #000121 — Check No./Cover No./Table No.
•100.35 — Subtotal amount
Machine#0002REG C04 07-01-97 14:31 001186Check No. 001328 2CT #000226
•100.35
----------------------------------------TL No 23 •2,957.75
159QT-2000 Reference Manual
Journal Memory (J-MEMO)
REG C01 07-11-97 16:34 001029 — Mode/Clerk/Date/Time/Consecutive No. 1 PLU0055 •100.00 0.12% %- -0.12 TL •99.88 CASH •99.88 MC #03P1 C01 07-11-97 16:35 001030 — Some program are made in Program 1 mode. MC #03X/Z C01 07-11-97 16:37 001031X 0100015 DEPT — Report issued MC #03REG C04 07-11-97 17:11 001032
<--------- — Data received MC #03
Note:1. All journal memory report prints from the oldest data, and displays from the newest data
stored in the journal memory.2. Journal memory report by date and consecutive number prints from the designated
receipt and displays the designated receipt only. If there is no designated data in thememory, prints or displays all journal memory report.
3. Journal memory is reset by “Journal memory clear operation” in the PGM 7 mode (referto the QT-2000 Programming manual) or execute arrangement which is includedjournal memory clear command (refer to the Application system chapter of this manual)by manual or by scheduler.All journal memory is reset---- By Manual operation in PGM7.---- By executing arrangement (journal memory command included).The older half is reset---- By executing arrangement (journal memory command included).
160
Read and Reset
Employee Activity
Employee Report (Daily)
MC #02 X/Z CLAPTON 12-31-97 11:59 AM 001234 —Header
X 000029 EMPLOYEE 1234 —Mode/Report code/Report title
#HARRISON 1111111111 —Employee No./Employee character/Social Security #BAKER 2222222222#PEABODY 3333333333#JOHONSON 4444444444 • • • •
MC #02 X/Z CLAPTON 12-31-97 11:59 AM 001234 —Header
X 000029 EMPLOYEE * 1234 —Mode, Report code/Report title/Overflow flag“*”/Z counter
#123456 HARRISON 0123456789 —Employee No./Employee character/Social Security No.
MONDAY 12-20-97 —Day of the week/DateIN OUT BRK JOB# TIP WORK —Special character (file 023, Rec. 39 & 40)08:00-10:00 00:15 12 $12.34 01:45 —Shift 1: Clock-in, Clock-out/Break/Job code, Tip, Work time12:00-**:** 00:10 01 $0.00 **:** —Shift 2: Clock-out shift *1**:**-**:** —Shift 3: Clock-in shift *2 ----------------------------------------TL 00:25 $12.34 **:** —Special character (rec 028)/Break total/ Tip total/ Work time total *3
JOB# 12 01:45 —Job summary (Special character (rec 039)/Job code/Work time) *4JOB# 01 **:** —Job summary *5 REGULAR TIME 99:99 —Special character (rec 037)/Regular work hoursOVER TIME 99:99 —Special character (rec 038)/Overtime work hoursTL 9999:99 $1,234.45 —Special character (rec 028)/Total of work hours/Pay
*1 If employee is not clocked-out the shift, then “**:**” is printed on OUT & WORK.*2 If employee is not clocked-in the shift, then “**:**-**:**” is printed on IN&OUT.*3 If employee is not clocked-out the shift yet, then “**:**” is printed on WORK.*4 JOB summary is printed in order to clock-in the shift.
If there is the same JOB code, then it will add to the JOB that was found before.*5 If employee is not clocked-out the shift, then “**:**” is printed. No JOB # is printed,
if employee is not clocked-in the shift.
161QT-2000 Reference Manual
MC #02X/Z CLAPTON 12-31-97 11:59 AM 001234
X 000029 EMPLOYEE 1234
#123456 0123456789
MONDAY 12-21-97 —Day of the week/Date *2 IN++ OUT+ BRK+ JOB# TIP+ WORK08:00-10:00 00:15 12 $12.34 01:45 —Shift 112:00-15:00 00:10 01 $0.00 02:50 —Shift 2**:**-**:** —Shift 3----------------------------------------TL 00:25 $12.34 04:35
TUESDAY 12-22-97IN++ OUT+ BRK+ JOB# TIP+ WORK08:00-10:00 00:15 12 $12.34 01:4512:00-15:00 00:10 01 $0.00 02:50**:**-**:** ----------------------------------------TL 00:25 $12.34 04:35
WEDNESDAY 12-23-97IN++ OUT+ BLK+ JOB# TIP+ WORK**:**-**:** **:**-**:** **:**-**:** ----------------------------------------TL 00:00 $0.00 00:00
SUNDAYIN++ OUT+ BLK+ JOB# TIP+ WORK
----------------------------------------TL 00:00 $0.00 00:00
JOB# 12 01:45 —Job summaryJOB# 01 02:00JOB# 05 02:00JOB# 10 02:08REGULAR TIME 99:99 —Special character/Regular work hoursOVER TIME 99:99 —Special character/Overtime work hoursTL 9999:99 $1,234.45 —Special character/Total of work hours/Pay
Employee Report (Weekly/Bi-weekly)
*1 If all shift in one day of the week is zero (no data), then that day of the week is not printedon the report.
*2 The report always starts from Monday.
162
Read and Reset
MC #02X/Z CLAPTON 01-14-98 11:59 AM 001234 —Header
Z 0001031 HOURLY PRODUCT * 1234 —Mode/Report code/Report title/Overflow flag“*”/Z counter
09:00→ 09:30 —CycleGROSS 123456.789 1,234.56 9999.99%NET No123456 $12,345,678.90 —Totalizer character/QTY/Amount 5% —Sales ratio A (% is fixed)PLU0001 123456.789 $1,234.56 9999.99%---------------------------------------- 10% $1,234.45 —Sales ratio B (% is fixed)/Total Amount in Time zone 09:30→ 10:00 —CycleGROSS 123456.789 $1,234.56 9999.99%NET No123456 $12,345,678.90PLU0001 123456.789 $1,234.56 9999.99%---------------------------------------- 10% $1,234.45 —Sales ratio B (% is fixed)/Total Proceeds in Time zone • • •19:30→ 20:00 —CycleGROSS 123456.789 $1,234.56 9999.99%NET No123456 $12,345,678.90 5%PLU0001 123456.789 $1,234.56 9999.99%---------------------------------------- 10% $1,234.45 —Sales ratio B (% is fixed)/Total Amount in Time zone
TL $1,234.45 —Special character/Total Amount in all Time zone
Sales ratio A = (Sum of each totalizer in one Time zone/Total Amount in its Time Zone) × 100Sales ratio B = (Total Amount in one zone/Total Amount in all Time zone) × 100
MC #02 X/Z CLAPTON 12-31-98 11:59 AM 001234 —Header
Z 0000024 HOURLY LABOR 1234 —Mode/Report code/Report title/Overflow flag “*”/Z counter
09:00→ 09:30 No999999 $12,345,378.90 —Cycle/NET counter/NET Amount 99.99% —NET ratioCOST 9999:99 $12,345,678.90 —Special character/Work time/Pay 99.99% —Pay ratioNET SALES/HOUR $12,345,678.90 —Proceeds per work timeCOST/TRANSACTION $12,345,678.90 —Wages per transaction
09:00→ 09:45 No999999 $12,345,378.90 99.99%COST 9999:99 $12,345,678.90 99.99%NET SALES/HOUR $12,345,678.90COST/TRANSACTION $12,345,678.90
Hourly Item
Hourly/Labor report
163QT-2000 Reference Manual
MC #02X/Z CLAPTON 01-14-98 11:59 AM 001234 —Header
Z 0001067 IDC(1) CLEAR 1234 —Mode/Report code/Report title/Z counter Normal End (from Flash Rom)
IDC Clear
1. If the report is finished by error, then print error code.2. This report is stored into J-MEMO.
165QT-2000 Reference Manual
A-1. Function key list ...................................................................................... 166
166
Function key list
A-1. Function key listnoitcnuF edoC retcarahclaitinI noitcnuF edoC retcarahclaitinI
kcehcddA 490 KHCDDA tuodiaP 120 DPtnemegnarrA 440 GRA pukciP 220 PU.P
ypoclliB 740 LLIB sulP 920 +tuo/ni-kaerB 901 TUO/NI-KAERB ULP 840 #ULP
lecnaC 632 LECNAC yrtnEtsoP 511 YRTNETSOPderednettnuomahsaC 100 HSAC edommargorP 321 EDOMMGP
egrahC 200 EGRAHC muimerP 030 +%tnemesrodnekcehC 930 E.KC yriuqniecirP 800 QNICRP
tnirpkcehC 210 PKHC ecirP 940 CRPrednetkcehC 300 KCEHC roF/ytitnauQ 380 TQrebmunkrelC 270 #KLC llaceR 131 LLACERrefsnartkrelC 310 SNARTKLC tpieceR 830 TCR
tuo/ni-kcolC 801 TUO/NI-KCOLC FFO/nOtpieceR 670 FFO/NOTCRnopuoC 320 NOPUOC tnuoccanodevieceR 020 CR
2nopuoC 630 2NPC dnufeR 330 FRtiderC 400 TIDERC edomretsigeR 121 EDOMGER
ebuC 090 XXX taepeRdnuoR 611 TAEPERRegnahcxeycnerruC 540 EC rebmuntaeS 911 #TAES
rebmunremotsuC 340 TC ecirptinudnoceS 070 @dn2tnioplamiceD 890 . latotbusmetievitceleS 580 TSIS
)erutuf(noitaralceD 160 ALCED kcehcetarapeS 590 KHCPEStnemtrapeD 150 TPED esaeleR/deefkcabpilS 450 R/BS
rebmuntnemtrapeD 531 #TPED esaeleR/deefpilS 650 R/FStisopeD 520 TISOPED tnirppilS 550 PILStnuocsiD 820 –% erauqS 480 XX
edomyalpsiD 912 EDOMPSID yriuqnikcotS 900 QNIKTSffO/nOyalpsiD 021 FFO/NOPSID erotS 031 EROTS
ni-taE 821 NI-TAE tnemtrapedbuS 331 nnTPEDBUS)erutuf(tuo/nitnE 501 TNE rebmuntnemtrapedbuS 431 #TPDSdioV/tcerrocrorrE 430 DIOV noitutitsbuS 111 .TSBUS
ecirptinutsriF 960 @ts1 latotbuS 570 LATOTBUSULPtalF 360 ULP nnn rebmunelbaT 850 #LBT
noitisopemoH 812 EMOH refsnartelbaT 410 SNARTLBTnoBesuoH 411 NOBESUOH tuo-ekaT 921 TUO-EKAT
psiDomeM-J 702 OMEMJ tfihssutatsxaT 750 S/TnoBnetteK 311 NETTEK/X latotbustnuomaelbaxaT 770 TSAT
tsiL 631 TSIL tpmexexaT 260 TPMEXErebmuntsiL 731 #TSIL tnirptxeT 110 TRP
naoL 910 NAOL llacertxeT 010 RAHCyekdesunutuokcoL 000 PON rezeerhT o 1022100 000
egnahcaideM 811 GHCAIDEM rezowT o 1021100 00tfihsuneM 460 UNEM piT 510 PIT
latotbusesidnahcreM 080 TSDM noitadilaV 730 DLVsuniM 720 – TAV 640 TAV
noitacilpitluM 280 X edomZ/X 221 EDOMZ/XecnalabweN 600 BN yekciremuN 102n000 01="0",9~1=n
kcehcweN 190 KHCWEN raelC 202kcehcdlO/weN 390 DLO/WEN pikS/epacsE 112tpiecerlamroN 610 TCRMRN seY 212
elasoN 240 SN oN 312dda-noN 040 # worratfeL 412
elasoN/dda-noN 140 SN/# worrathgiR 512kcehcdlO 290 KHCDLO worrapU 612
nepO 760 NEPO worranwoD 7122nepO 860 2NEPO psiDesreveR 602 PSDESREVER
kcehCnepO 711 KHCNEPO puegaP 122 PUEGAPrebmunrotarepO 870 #EPO nwodegaP 022 NWODEGAP
teser/daerrotarepO 370 Z/XEPO
167QT-2000 Reference Manual
A-2. File list ...................................................................................................... 168
168
File list
A-2. File listeliF.oN
noitpircsedeliFdroceRhtgnel
.oN.xaMsdrocerfo
kroWezis
noitpircseD-ubirttA
noit-tacollA
elba-kcaB
puselifmetsyS
109 elbatnoitcennocmetsyS 81 33 57 margorP oN seY209 retemarapO/I 5 01 96 margorP oN seY309 noitcennocretnirP 72 99 18 margorP oN seY409 rebmunevitucesnoC 3 1 96 reffuB oN seY999 golrorremetsyS 11 999 99 reffuB oN seY
seliflatotdnanoitcnuF
100 rezilatotdexiF 62 95 18 elaS/mgP seY seY101 )1latotcidoirep( 01 95 57 selaS seY seY102 )2latotcidoirep( 01 95 57 selaS seY seY103 )noitadilosnocyliad( 01 95 57 retsamrof selaS seY oN104 )noitadilosnoc1cidoirep( 01 95 57 retsamrof selaS seY oN105 )noitadilosnoc2cidoirep( 01 95 57 retsamrof selaS seY oN106 )krownoitadilosnoc( 01 95 57 retsamrof reffuB seY oN200 noitcnufeerF 83 999 99 elaS/mgP seY seY201 )1latotcidoirep( 01 999 57 selaS seY seY202 )2latotcidoirep( 01 999 57 selaS seY seY203 )noitadilosnocyliad( 01 999 57 retsamrof selaS seY oN204 )noitadilosnoc1cidoirep( 01 999 57 retsamrof selaS seY oN205 )noitadilosnoc2cidoirep( 01 999 57 retsamrof selaS seY oN206 )krownoitadilosnoc( 01 999 57 retsamrof reffuB seY oN300 tnemtrpapedbuS 45 99 531 elaS/mgP seY seY301 )1latotcidoirep( 51 99 18 selaS seY seY302 )2latotcidoirep( 51 99 18 selaS seY seY303 )noitadilosnocyliad( 51 99 18 retsamrof selaS seY oN304 )noitadilosnoc1cidoirep( 51 99 18 retsamrof selaS seY oN305 )noitadilosnoc2cidoirep( 51 99 18 retsamrof selaS seY oN306 )krownoitadilosnoc( 51 99 18 retsamrof reffuB seY oN400 ULP 29 9999 771 elaS/mgP seY seY500 tnemtrapeD 45 99 531 elaS/mgP seY seY501 )1latotcidoirep( 51 99 18 selaS seY seY502 )2latotcidoirep( 51 99 18 selaS seY seY503 )noitadilosnocyliad( 51 99 18 retsamrof selaS seY oN504 )noitadilosnoc1cidoirep( 51 99 18 retsamrof selaS seY oN505 )noitadilosnoc2cidoirep( 51 99 18 retsamrof selaS seY oN506 )krownoitadilosnoc( 51 99 18 retsamrof reffuB seY oN600 puorG 62 99 18 elaS/mgP seY seY601 )1latotcidoirep( 01 99 57 selaS seY seY602 )2latotcidoirep( 01 99 57 selaS seY seY603 )noitadilosnocyliad( 01 99 57 retsamrof selaS seY oN604 )noitadilosnoc1cidoirep( 01 99 57 retsamrof selaS seY oN605 )noitadilosnoc2cidoirep( 01 99 57 retsamrof selaS seY oN606 )krownoitadilosnoc( 01 99 57 retsamrof reffuB seY oN900 selasylruoH 02 999 78 elaS/mgP seY seY901 )1latotcidoirep( 02 999 78 selaS seY seY902 )2latotcidoirep( 02 999 78 selaS seY seY903 )noitadilosnocyliad( 02 999 78 retsamrof selaS seY oN904 )noitadilosnoc1cidoirep( 02 999 78 retsamrof selaS seY oN905 )noitadilosnoc2cidoirep( 02 999 78 retsamrof selaS seY oN906 )krownoitadilosnoc( 02 999 78 retsamrof reffuB seY oN010 selasylhtnoM 02 23 78 elaS/mgP seY seY011 )1latotcidoirep( 02 23 78 selaS seY seY012 )2latotcidoirep( 02 23 78 selaS seY seY013 )noitadilosnocyliad( 02 23 78 retsamrof selaS seY oN014 )noitadilosnoc1cidoirep( 02 23 78 retsamrof selaS seY oN015 )noitadilosnoc2cidoirep( 02 23 78 retsamrof selaS seY oN
169QT-2000 Reference Manual
eliF.oN
noitpircsedeliFdroceRhtgnel
.oN.xaMsdrocerfo
kroWezis
noitpircseD-ubirttA
noit-tacollA
elba-kcaB
pu016 )krownoitadilosnoc( 02 23 78 retsamrof reffuB seY oN210 nosaerdioV 92 99 78 elaS/mgP seY seY211 )1latotcidoirep( 01 99 57 selaS seY seY212 )2latotcidoirep( 01 99 57 selaS seY seY213 )noitadilosnocyliad( 01 99 57 retsamrof selaS seY oN214 )noitadilosnoc1cidoirep( 01 99 57 retsamrof selaS seY oN215 )noitadilosnoc2cidoirep( 01 99 57 retsamrof selaS seY oN216 )krownoitadilosnoc( 01 99 57 retsamrof reffuB seY oN810 sisylanaelbaT 23 9999 39 elaS/mgP seY seY811 )1latotcidoirep( 01 9999 57 selaS seY seY812 )2latotcidoirep( 01 9999 57 selaS seY seY813 )noitadilosnocyliad( 01 9999 57 retsamrof selaS seY oN814 )noitadilosnoc1cidoirep( 01 9999 57 retsamrof selaS seY oN815 )noitadilosnoc2cidoirep( 01 9999 57 retsamrof selaS seY oN816 )krownoitadilosnoc( 01 9999 57 retsamrof reffuB seY oN020 latotdnarG 42 3 57 elaS/mgP seY seY021 )1latotcidoirep( 8 3 96 selaS seY seY022 )2latotcidoirep( 8 3 96 selaS seY seY023 )noitadilosnocyliad( 8 3 96 retsamrof selaS seY oN024 )noitadilosnoc1cidoirep( 8 3 96 retsamrof selaS seY oN025 )noitadilosnoc2cidoirep( 8 3 96 retsamrof selaS seY oN026 )krownoitadilosnoc( 8 3 96 retsamrof reffuB seY oN
krelC700 krelC 59 99 561 margorP seY seY030 knilliatedkrelC 4 021 57 margorP seY seY110 liatedkrelC 01 99 57 selaS seY seY111 )1latotcidoirep( 01 99 57 selaS seY seY112 )2latotcidoirep( 01 99 57 selaS seY seY113 )noitadilosnocyliad( 01 99 57 retsamrof selaS seY oN114 )noitadilosnoc1cidoirep( 01 99 57 retsamrof selaS seY oN115 )noitadilosnoc2cidoirep( 01 99 57 retsamrof selaS seY oN116 )krownoitadilosnoc( 01 99 57 retsamrof reffuB seY oN
ecnadnettA&emiT410 robaL/ylruoH 62 69 margorP seY seY411 )1latotcidoirep( 62 69 selaS seY seY412 )2latotcidoirep( 62 69 selaS seY seY413 )noitadilosnocyliad( 62 69 retsamrof selaS seY seY414 )noitadilosnoc1cidoirep( 62 69 retsamrof selaS seY seY415 )noitadilosnoc2cidoirep( 62 69 retsamrof selaS seY seY416 )krownoitadilosnoc( 62 69 retsamrof selaS seY seY910 emiTkroW 71 9999 margorP seY seY911 )1latotcidoirep( 71 9999 selaS seY seY912 )2latotcidoirep( 71 9999 selaS seY seY913 )noitadilosnocyliad( 71 9999 retsamrof selaS seY seY914 )noitadilosnoc1cidoirep( 71 9999 retsamrof selaS seY seY915 )noitadilosnoc2cidoirep( 71 9999 retsamrof selaS seY seY916 )krownoitadilosnoc( 71 9999 retsamrof selaS seY seY008 enoZemiT 6 42 margorP seY seY108 eeyolpmE 53 99 margorP seY seY208 edocboJ 22 05 margorP seY seY308 eludehcS 11 999 margorP seY seY608 krowecnadnettA&emiT 1 99kcehC
510 xednIkcehC margorP seY seY060 liatedkcehC margorP seY seY660 krowliatedkcehC selaS seY seY
170
File list
eliF.oN
noitpircsedeliFdroceRhtgnel
.oN.xaMsdrocerfo
kroWezis
noitpircseD-ubirttA
noit-tacollA
elba-kcaB
pumetIylruoH
120 metIylruoH 01 0291 margorP seY seY121 )1latotcidoirep( 01 0291 margorP seY seY122 )2latotcidoirep( 01 0291 margorP seY seY123 )noitadilosnocyliad( 01 0291 retsamrof margorP seY seY124 )noitadilosnoc1cidoirep( 01 0291 retsamrof margorP seY seY125 )noitadilosnoc2cidoirep( 01 0291 retsamrof margorP seY seY126 )krownoitadilosnoc( 01 0291 retsamrof margorP seY seY130 kniLmetIylruoH 4 084 margorP seY seY
CDI750 )1(CDI 05 9999 selaS seY seY753 )elifnoitadilosnoc( 05 9999 retsamrof selaS seY seY756 )krownoitadilosnoc( 05 9999 retsamrof selaS seY seY850 )2(CDI 05 9999 selaS seY seY853 )elifnoitadilosnoc( 05 9999 retsamrof selaS seY seY856 )krownoitadilosnoc( 05 9999 retsamrof selaS seY seY950 )3(CDI 05 9999 selaS seY seY953 )elifnoitadilosnoc( 05 9999 retsamrof selaS seY seY956 )krownoitadilosnoc( 05 9999 retsamrof selaS seY seY360 reffuBCDI 05 9999 reffuB seY seY408 knilCDI 6 999 margorP seY seY
reffub/egassem/margorP220 lortnoclareneG 6 43 96 margorP oN seY320 retcarahclaicepS 61 82 96 margorP oN seY420 redaehtropeR 61 71 96 margorP oN seY520 elbatxaT 8 5 39 margorP seY seY620 puorgnwodlluP 301 9999 981 margorP seY seY820 elbatunemteS 08 999 381 margorP seY seY920 Z/XhctaB 9 01 96 margorP seY seY230 egassempils/tpieceR 04 74 96 margorP seY seY330 egassemesrodnE 04 4 96 margorP seY seY530 reffubtnirP 77 999 96 reffuB seY oN630 reffubnoitartsigeR 07 004 96 reffuB seY oN730 reffubdiovllA 02 9999 96 DO TON ETELED B reffu Y SE NO
930 llacerretcarahC 04 9999 96 margorP seY seY140 tnirpkcehC 3 9 96 margorP seY seY340 reffubyalpsidyromemlanruoJ 04 999 96 reffuB seY oN440 reffubyalpsiD 04 999 96 reffuB seY oN740 ogolcihparG 31 234 96 margorP seY seY840 reffubyromemlanruoJ 14 002 96 reffuB seY oN450 @dn2ULP 24 9999 99 margorP seY seY260 reludehcS 41 99 57 margorP seY seY560 retcarahcredrO 61 99 96 margorP seY seY470 elbatyeK 63 291 171 margorP oN seY
tnemegnarrA830 )1(puorgegnarrA 42 9999 96 margorP seY seY831 )2(puorgegnarrA 42 9999 96 margorP seY seY832 )3(puorgegnarrA 42 9999 96 margorP seY seY833 )4(puorgegnarrA 42 9999 96 margorP seY seY834 )5(puorgegnarrA 42 9999 96 margorP seY seY
The above files are available for the QT-2000.The capacity consumed by each file is calculated by the formula:Capacity = Record length × No. of records + Work size
171QT-2000 Reference Manual
A-3. File format ......................................................................................... 173A-3-1. Fixed totalizer file ............................................................................. 173
A-3-1-1 Fixed totalizer (daily) ....................................................................................... 173A-3-1-2 Fixed totalizer (periodic/consolidation)............................................................ 173
A-3-2. Transaction key file .......................................................................... 174A-3-2-1 Transaction key (daily) .................................................................................... 174A-3-2-2 Transaction key (periodic/consolidation) ......................................................... 174
A-3-3. Subdepartment file ........................................................................... 174A-3-3-1 Subdepartment (daily)..................................................................................... 174A-3-3-2 Subdepartment (periodic/consolidation) ......................................................... 174
A-3-4. PLU file .............................................................................................. 175A-3-4-1 PLU (daily) ...................................................................................................... 175A-3-4-2 PLU (periodic/consolidation) ........................................................................... 175A-3-4-3 PLU 2nd@ ...................................................................................................... 175
A-3-5. Department file ................................................................................. 176A-3-5-1 Department (daily) .......................................................................................... 176A-3-5-2 Department (periodic/consolidation) ............................................................... 176
A-3-6. Group file ........................................................................................... 180A-3-6-1 Group (daily) ................................................................................................... 180A-3-6-2 Group (periodic/consolidation) ........................................................................ 180
A-3-7. Clerk file ............................................................................................ 181A-3-7-1 Clerk (programming) ....................................................................................... 181A-3-7-2 Clerk detail (daily, periodic/consolidation) ....................................................... 192A-3-7-3 Clerk detail link................................................................................................ 192
A-3-8. Hourly sales file ................................................................................ 193A-3-8-1 Hourly sales (daily, periodic/consolidation) ..................................................... 193
A-3-9. Monthly sales file .............................................................................. 193A-3-9-1 Monthly sales (daily, periodic/consolidation) ................................................... 193
A-3-10. Hourly item file .................................................................................. 194A-3-10-1 Hourly item ...................................................................................................... 194A-3-10-2 Hourly item link ............................................................................................... 194A-3-10-3 Hourly/Labor ................................................................................................... 194
A-3-11. Work time file .................................................................................... 195A-3-13. IDC file ............................................................................................... 196
A-3-13-1 IDC file (1) ....................................................................................................... 196A-3-13-2 IDC file (2) ....................................................................................................... 196A-3-13-3 IDC file (3) ....................................................................................................... 196A-3-13-4 IDC buffer........................................................................................................ 196A-3-13-5 IDC link ........................................................................................................... 197
A-3-14. Time zone file .................................................................................... 197A-3-15. Employee file .................................................................................... 198A-3-16. Job code file ...................................................................................... 199A-3-17. Schedule file ..................................................................................... 199A-3-18. Void table file..................................................................................... 201
A-3-18-1 Void table (daily) ............................................................................................. 201A-3-18-2 Void table (periodic/consolidation) .................................................................. 201
172
File Format
A-3-19. Table analysis file ............................................................................. 202A-3-19-1 Table analysis (daily) ....................................................................................... 202A-3-19-2 Table analysis (periodic/consolidation) ........................................................... 202
A-3-20. Grand total file .................................................................................. 202A-3-20-1 Grand total (daily) ........................................................................................... 202A-3-20-2 Grand total (consolidation) .............................................................................. 202
A-3-21. General control file ........................................................................... 203A-3-21-1 General control ............................................................................................... 203
A-3-22. Special character file ........................................................................ 221A-3-22-1 Special character ............................................................................................ 221
A-3-23. Report header file ............................................................................. 222A-3-23-1 Report header ................................................................................................. 222
A-3-24. Tax table file ...................................................................................... 223A-3-24-1 Tax table.......................................................................................................... 223
A-3-25. Pulldown group file .......................................................................... 223A-3-25-1 Pulldown group ............................................................................................... 223
A-3-26. Set menu table file ............................................................................ 223A-3-26-1 Set menu table ................................................................................................ 223
A-3-27. Batch X/Z file ..................................................................................... 224A-3-27-1 Batch X/Z ........................................................................................................ 224
A-3-28. Receipt/Slip message file ................................................................ 224A-3-28-1 Receipt/Slip message ..................................................................................... 224
A-3-29. Check endorsement message file................................................... 224A-3-29-1 Check endorsement message ........................................................................ 224
A-3-30. Arrangement file ............................................................................... 225A-3-30-1 Arrangement group (1) ~ (5) ........................................................................... 225
A-3-31. Character recall file .......................................................................... 225A-3-31-1 Character recall ............................................................................................... 225
A-3-32. Check print file.................................................................................. 225A-3-32-1 Check print ...................................................................................................... 225
A-3-33. Graphic logo file ............................................................................... 225A-3-33-1 Graphic logo.................................................................................................... 225
A-3-34. Scheduler file .................................................................................... 226A-3-34-1 Scheduler ........................................................................................................ 226
A-3-35. Order character file .......................................................................... 226A-3-35-1 Order character ............................................................................................... 226
A-3-36. System files....................................................................................... 227A-3-36-1 Key table ......................................................................................................... 227A-3-36-2 System connection table ................................................................................. 227A-3-36-3 I/O parameter table ......................................................................................... 228A-3-36-4 Printer definition table ..................................................................................... 228A-3-36-5 System error log.............................................................................................. 228
173QT-2000 Reference Manual
A-3. File format
A-3-1. Fixed totalizer file
A-3-1-1 Fixed totalizer (daily)
File name: Fixed totalizer (daily) File No.: 001 Max. allocatable records: 59 (fixed)
A-3-1-2 Fixed totalizer (periodic/consolidation)
File name: Fixed totalizer (periodic 1) File No.: 101 Max. allocatable records: 59 (fixed)File name: Fixed totalizer (periodic 2) File No.: 201 Max. allocatable records: 59 (fixed)File name: Fixed totalizer (daily consolidation) File No.: 301 Max. allocatable records: 59 (fixed)File name: Fixed totalizer (periodic 1 consolidation) File No.: 401 Max. allocatable records: 59 (fixed)File name: Fixed totalizer (periodic 2 consolidation) File No.: 501 Max. allocatable records: 59 (fixed)File name: Fixed totalizer (consolidation work) File No.: 601 Max. allocatable records: 59 (fixed)
.oNceR rotpircseD .oNceR rotpircseD100 latotselasssorG 130 1rewardnihsacycnerrucngieroF200 latotselasteN 230 1rewardnikcehcycnerrucngieroF300 rewardnihsaC 330 2rewardnihsacycnerrucngieroF400 tnuomaderalcedhsaC 430 2rewardnikcehcycnerrucngieroF500 tnuomahsactrohsderalceD 530 3rewardnihsacycnerrucngieroF600 tnuomahsacrevoderalceD 630 3rewardnikcehcycnerrucngieroF700 rewardniegrahC 730 noitcudeR800 tnuomaderalcedegrahC 830 nrutermetI900 tnuomaegrahctrohsderalceD 930 retnuocraelC010 tnuomaegrahcrevoderalceD 040 desutoN110 rewardnikcehC 140 gnidnuoR210 tnuomaderalcedkcehC 240 desutoN310 tnuomakcehctrohsderalceD 340 desutoN410 tnuomakcehcrevoderalceD 440 desutoN510 rewardnitiderC 540 1tnuomaelbaxaT610 tnuomaderalcedtiderC 640 1xaT710 tnuomatiderctrohsderalceD 740 desutoN810 tnuomatidercrevoderalceD 840 2tnuomaelbaxaT910 desutoN 940 2xaT020 desutoN 050 desutoN120 desutoN 150 3tnuomaelbaxaT220 desutoN 250 3xaT320 latotedomdnufeR 350 desutoN420 tnuocremotsuC 450 4tnuomaelbaxaT520 remotsucrepselasegarevA 550 4xaT620 eefecivresgnihsackcehC 650 desutoN720 eefecnalaBweN 750 5tnuomaelbaxaT820 desutoN 850 5xaT920 latot1noissimmockrelC 950 desutoN030 latot2noissimmockrelC
Character Counter Totalizer
0 16 21 26
Counter Totalizer
0 5 10
174
File Format
A-3-2. Transaction key file
A-3-2-1 Transaction key (daily)
File name: Transaction key (daily) File No.: 002 Max. allocatable records: 999
A-3-2-2 Transaction key (periodic/consolidation)
File name: Transaction key (periodic 1) File No.: 102 Max. allocatable records: 999File name: Transaction key (periodic 2) File No.: 202 Max. allocatable records: 999File name: Transaction key (daily consolidation) File No.: 302 Max. allocatable records: 999File name: Transaction key (periodic 1 consolidation)
File No.: 402 Max. allocatable records: 999File name: Transaction key (periodic 2 consolidation)
File No.: 502 Max. allocatable records: 999File name: Transaction key (consolidation work) File No.: 602 Max. allocatable records: 999
A-3-3. Subdepartment file
A-3-3-1 Subdepartment (daily)
File name: Subdepartment (daily) File No.: 003 Max. allocatable records: 99
A-3-3-2 Subdepartment (periodic/consolidation)
File name: Subdepartment (periodic 1) File No.: 103 Max. allocatable records: 99File name: Subdepartment (periodic 2) File No.: 203 Max. allocatable records: 99File name: Subdepartment (daily consolidation) File No.: 303 Max. allocatable records: 99File name: Subdepartment (periodic 1 consolidation) File No.: 403 Max. allocatable records: 99File name: Subdepartment (periodic 2 consolidation) File No.: 503 Max. allocatable records: 99File name: Subdepartment (consolidation work) File No.: 603 Max. allocatable records: 99
Counter Totalizer
0 5 10
Character Counter Totalizer
0 18 24 28
Func
tion
code
Program @/Rate
2 33 38
Character Counter Totalizer
0 16 22 25
Dou
ble
Bon
Program @
32 39
HALO
28
Link
31
Ord
er ch
ar. l
ink
33
Ord
er
35
Pull-downGroup
DiscountTotalizer
44 49 54
Counter Totalizer
0 5 10 15
DiscountTotalizer
175QT-2000 Reference Manual
QTY
Am
ount
Disc
ount
Not
Use
d
Not
Use
d
Pulld
own
Gro
up L
ink
Uni
t Sto
ck
LIN
K
Ran
dom
Cod
e
Min
imum
Stoc
k
24 30 33 36 39 42 45 47 50 51 52 54 58
Set M
enu
Link
Dou
ble
Bon
Orde
r Cha
racte
r Link
Ord
er
@PGMCharacter
HA
LO
6863 73 78 83 88
STO
CK
A-3-4. PLU file
A-3-4-1 PLU (daily)
File name: PLU File No.: 004 Max. allocatable records: 9999
A-3-4-2 PLU (periodic/consolidation)
File name: PLU (periodic 1) File No.: 104 Max. allocatable records: 9999File name: PLU (periodic 2) File No.: 204 Max. allocatable records: 9999File name: PLU (daily consolidation) File No.: 304 Max. allocatable records: 9999File name: PLU (periodic 1 consolidation) File No.: 404 Max. allocatable records: 9999File name: PLU (periodic 2 consolidation) File No.: 504 Max. allocatable records: 9999File name: PLU (consolidation work) File No.: 604 Max. allocatable records: 9999
Counter Totalizer
0 5 10 15
DiscountTotalizer
Futureuse
20 25
Futureuse
30
Stockquantity
PGM
0 24 30
2nd@
LIN
K
Uni
t Sto
ck
2nd
QTY
33 36 39 42
Character
A-3-4-3 PLU 2nd@
File name: PLU 2nd@ File No.: 054 Max. allocatable records: 9999
176
File Format
A-3-5. Department file
A-3-5-1 Department (daily)
File name: Department (daily) File No.: 005 Max. allocatable records: 99
A-3-5-2 Department (periodic/consolidation)
File name: Department (periodic 1) File No.: 105 Max. allocatable records: 99File name: Department (periodic 2) File No.: 205 Max. allocatable records: 99File name: Department (daily consolidation) File No.: 305 Max. allocatable records: 99File name: Department (periodic 1 consolidation) File No.: 405 Max. allocatable records: 99File name: Department (periodic 2 consolidation) File No.: 505 Max. allocatable records: 99File name: Department (consolidation work) File No.: 605 Max. allocatable records: 99
Character Counter Totalizer
0 16 22 25
Dou
ble
Bon
Program @
32 39
HALO
28
Link
31
Ord
er ch
ar. l
ink
33
Ord
er
35
Pull-downGroup
DiscountTotalizer
44 49 54
Counter Totalizer
0 5 10 15
DiscountTotalizer
177QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
)@dn2ULProfevitceffetoN(:lortnocmetielgniS3=tpiecermetielgniS,0=tpiecerlamroN
tnacifingiSrebmun
:D
21
)@dn2ULProfevitceffetoN(1sutatsmetievitceleS a 0=oN1=seY :
)b+a(D
11)@dn2ULProfevitceffetoN(2sutatsmetievitceleS b 0=oN2=seY
)ULProfevitceffeylnO(noitaraperp/tnemidnoc/lamroN2=noitaraperP,1=tnemidnoC,0=metilamroN
tnacifingiSrebmun
:D
01
"0"syawlA ;D
9
:iD/uE5~1sutatselbaxaT
tnacifingiSrebmun
:)c+b+a(
D8
:eropagniS,.S.U1sutatselbaxaT a 0=oN
1=seY
2sutatselbaxaT b 0=oN2=seY
3sutatselbaxaT c 0=oN4=seY
:adanaC4=4elbaxaT,3=3elbaxaT,2=2elbaxaT,1=1elbaxaT
6=4&1elbaxaT,5=3&1elbaxaT,4=2&1elbaxaT0=elbaxatnoN,7=elbaxatllA
tnacifingiSrebmun
)@dn2ULProfevitceffetoN(noitadilavelpitluM).elbissopsinoitadilavenoylno,"oN"fI( a 0=seY
1=oN :)b+a(
D7)ULProfevitceffeylnO(ULPnepO b 0=oN
4=seY
.ecirptinu0elbanE a 0=oN1=seY
:)c+b+a(
D6
)@dn2ULProfevitceffetoN(.ecirpevitagenelbanE b 0=oN2=seY
)@dn2ULProfevitceffetoN(hsaH c 0=oN4=seY
"0"syawlA ;D
5
.ecirptinuderetneyllaunamrof)LDL(noitatimiltigidwoL)@dn2ULProfevitceffetoN(
tnacifingiSrebmun
:D
4
"0"syawlA ;D
3
)@dn2ULProfevitceffetoN(1noissimmoC a 0=oN1=seY :
)b+a(D
1)@dn2ULProfevitceffetoN(2noissimmoC b 0=oN2=seY
"0"syawlA ;D
1
Progrm field for PLU, department, subdepartment, PLU 2nd@
178
File Format
noitpircseD eciohC margorPedoc
)@dn2ULPdnaULProf(rebmundrocertnemtapedbuskniLtnacifingiS
srebmun::
D6
D5
rebmundrocertnemtapedkniL)tnemtrapedbusdna@dn2ULPULProf(
tnacifingiSsrebmun
::D
4D
3
rebmundrocerpuorgkniLtnacifingiS
srebmun::
D2
D1
noitpircseD eciohC margorPedoc
)ULProfylno(edocmodnarULPtnacifingiS
srebmun:: ~ ::
D6
D5
D~2
D1
noitpircseD eciohC margorPedoc
)ULProfylno(rebmunelbatunemteStnacifingiS
srebmun::::
D4
D3
D2
D1
noitpircseD eciohC margorPedoc
)999.99~100.0(ytitnauqkcotstinU)."1"sastaert,"0"fI(.tnioplamicedhtiwretnE
)@dn2ULPdnaULProf(
tnacifingiSsrebmun
:: ~ ::D
21D
11~ D
9D
8
"0"syawlA ;D
7
)999.99~100.0(ytitnauqkcotsmumitpO)@dn2ULPdnaULProf(.tnioplamicedhtiwretnE
tnacifingiSsrebmun
:: ~ ::D
6D
5~ D
3D
2
"0"syawlA ;D
1
noitpircseD eciohC margorPedoc
.yllaunamecirptinugniretneroftimiltnuomahgiH)@dn2ULProfton(
tnacifingiSsrebmun
:: ~ ::D
6D
5~ D
2D
1
noitpircseD eciohC margorPedoc
)99~00(rebmundrocerretcarahcredrO)@dn2ULProfton(
tnacifingiSsrebmun
::D
2D
1
Link field (for PLU, subdepartment, department), PLU 2nd@)
Random code field (for PLU)
Set menu link field (for PLU)
Unit/Minimum stock filed (for PLU)
HALO field (for subdepartment, department)
Order character link field (for PLU)
179QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
)9~1(stpiecernoBforebmuN)@dn2ULProfton().deussisinoBon,"0"fI(
tnacifingiSrebmun
:D
1
noitpircseD eciohC margorPedoc
)PKrofevitceffeylno(rolocgnitnirpredrO)@dn2ULProfton(
0=kcalB1=deR
:D
4
.1#retnirpredroottuotnirP)@dn2ULProfton( a 0=oN
1=seY:
)c+b+a(D
3
.2#retnirpredroottuotnirP)@dn2ULProfton( b 0=oN
2=seY
.3#retnirpredroottuotnirP)@dn2ULProfton( c 0=oN
4=seY
.4#retnirpredroottuotnirP)@dn2ULProfton( a 0=oN
1=seY:
)c+b+a(D
2
.5#retnirpredroottuotnirP)@dn2ULProfton( b 0=oN
2=seY
.6#retnirpredroottuotnirP)@dn2ULProfton( c 0=oN
4=seY
.7#retnirpredroottuotnirP)@dn2ULProfton(
0=oN1=seY
:D
1
noitpircseD eciohC margorPedoc
)1(rebmundrocerpuorgnwodlluP)@dn2ULProfton(
tnacifingiSsrebmun
::D
8D
7
)2(rebmundrocerpuorgnwodlluP)@dn2ULProfton(
tnacifingiSsrebmun
::D
6D
5
)3(rebmundrocerpuorgnwodlluP)@dn2ULProfton(
tnacifingiSsrebmun
::D
4D
3
)4(rebmundrocerpuorgnwodlluP)@dn2ULProfton(
tnacifingiSsrebmun
::D
2D
1
Double bon field (for PLU)
Order character link field (for PLU)
Pulldown group field (for PLU)
180
File Format
Character Counter Totalizer
0 16 21 26
Counter Totalizer
0 5 10
A-3-6. Group file
A-3-6-1 Group (daily)
File name: Group (daily) File No.: 006 Max. allocatable records: 99
A-3-6-2 Group (periodic/consolidation)
File name: Group (periodic 1) File No.: 106 Max. allocatable records: 99File name: Group (periodic 2) File No.: 206 Max. allocatable records: 99File name: Group (daily consolidation) File No.: 306 Max. allocatable records: 99File name: Group (periodic 1 consolidation) File No.: 406 Max. allocatable records: 99File name: Group (periodic 2 consolidation) File No.: 506 Max. allocatable records: 99File name: Group (consolidation work) File No.: 606 Max. allocatable records: 99
181QT-2000 Reference Manual
A-3-7. Clerk file
A-3-7-1 Clerk (programming)
File name: Clerk (programming) File No.: 007 Max. allocatable records: 99
A-3-7-1-1 Commission rate
Character
0 16 19 20
Cle
rk in
itia
lch
eck
#
42
Com
mis
sion
rate
27
Cle
rkco
ntro
l
31
Table #range
Menu/@control
Modecontrol
Functioncontrol (1)
37 53
Dra
wer
#
22
Cle
rk #
59
47
71 77 898365 95
Functioncontrol (2)
Functioncontrol (3)
Functioncontrol (4)
Functioncontrol (5)
Arrangementcontrol
Reportcontrol
Managercontrol
noitpircseD eciohC margorPedoc
)%99.99~10.0(1etarnoissimmoCtnacifingiS
rebmun)lamiced/w(
::::D
8D
7D
6D
5
)%99.99~10.0(2etarnoissimmoCtnacifingiS
rebmun)lamiced/w(
::::D
4D
3D
2D
1
noitpircseD eciohC margorPedoc
)999999~1(egnarelbatrofeulavmuminiM).gnimmargorponsnaem"0"(
tnacifingiSrebmun
:: ~ ::D
21D
11D
8D
7
)999999~1(egnarelbatrofeulavmumixaM).gnimmargorponsnaem"0"(
tnacifingiSrebmun
:: ~ ::D
6D
5D
2D
1
A-3-7-1-2 Table range
182
File Format
noitpircseD eciohC margorPedoc
yroslupmocrebmunkcehC0=oN4=seY
:D
01
yroslupmocrebmunelbaT a 0=oN1=seY
:)c+b+a(
D9
yroslupmocremotsucforebmuN b 0=oN2=seY
)noitazilanifta(yroslupmoctpiecertseuG c 0=oN4=seY
)ecnalabwenta(yroslupmoctpiecertseuG a 0=oN1=seY
:)c+b+a(
D8
)noitazilanifta(yroslupmoctnirphctab-otuapilS b 0=oN2=seY
)ecnalabwenta(yroslupmoctnirphctab-otuapilS c 0=oN4=seY
:noitubirttakrelC2=reganaM,1=krelC,0=reihsaC
tnacifingiSrebmun
:D
7
krelcgniniarT0=oN1=seY
:D
6
krelcrehtoybdetaerckcehcnepootelbanE a 0=oN1=seY
:)c+b+a(
D5
nongisotelbasiD b 0=oN2=seY
noitazilaniftaffongiS c 0=oN4=seY
;noitangisedDCL0=noitinifedoN,2=DCLdn2esU,1=DCLts1esU
tnacifingiSrebmun
:D
4
yroslupmocrebmuntaeS a 0=oN1=seY :
)b+a(D
3yroslupmoctuo-ekaT/ni-taE b 0=oN2=seY
"0"syawlA ;D
2
:noitarepodioV2=dewollatoN,1=noitcasnarttnerruC,0=diovetelpmoC
tnacifingiSrebmun
:D
1
A-3-7-1-3 Clerk control
183QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
.teehsunemts1esuotelbanE a 0=seY1=oN
:)c+b+a(
D01
.teehsunemdn2esuotelbanE b 0=seY2=oN
.teehsunemdr3esuotelbanE c 0=seY4=oN
.teehsunemht4esuotelbanE a 0=seY1=oN
:)c+b+a(
D9
.teehsunemht5esuotelbanE b 0=seY2=oN
.teehsunemht6esuotelbanE c 0=seY4=oN
.teehsunemht7esuotelbanE a 0=seY1=oN :
)b+a(D
8.teehsunemht8esuotelbanE b 0=seY2=oN
"0"syawlA ;;D
7D
6
"0"syawlA ;;D
5D
4
)8~0(.nongisretfarebmunteehsunemtluafeD,.oNteehsdelbasidehttestonoD(
).teehsunemsuoiverpgniniatniamsnaem"0"
tnacifingiSrebmun
:D
3
)2~0(.nongisretfarebmunteehsunem@tluafeD,.oNteehsdelbasidehttestonoD(
).teehsunemsuoiverpgniniatniamsnaem"0"
tnacifingiSrebmun
:D
2
tnemngissateehsunemnwodyatS/sutatS a 0=sutatS1=nwodyatS :
)b+a(D
1tnemngissateehsunem@nwodyatS/sutatS b 0=sutatS2=nwodyatS
A-3-7-1-4 Menu/@ control
184
File Format
noitpircseD eciohC margorPedoc
.edomGERnietarepootelbanE a 0=seY1=oN
:)c+b+a(
D01
.edomFERnietarepootelbanE b 0=seY2=oN
.edom–GERnietarepootelbanE c 0=seY4=oN
"0"syawlA ;D
9
.edom1MGPnietarepootelbanE a 0=seY1=oN
:)c+b+a(
D8
.edom2MGPnietarepootelbanE b 0=seY2=oN
.edom3MGPnietarepootelbanE c 0=seY4=oN
.edom4MGPnietarepootelbanE a 0=seY1=oN
:)c+b+a(
D7
.edom5MGPnietarepootelbanE b 0=seY2=oN
.edom6MGPnietarepootelbanE c 0=seY4=oN
.edom7MGPnietarepootelbanE0=seY1=oN
:D
6
.edomZ/XnietarpootelbanE a 0=seY1=oN
:)c+b+a(
D5
.edomreganaMnietarepootelbanE b 0=seY2=oN
.edomnoitadilosnoc/noitcerrocnietarepootelbanE c 0=seY4=oN
edomMGP-otuAnietarepoootelbanE a 0=seY1=oN :
)b+a(D
4edomrInietarepootelbanE b 0=seY2=oN
"0"syawlA ;;D
3D
2
:nongisretfaedomtluafeD2=Z/X,1=1MGP,0=GER
tnacifingiSrebmun
:D
1
A-3-7-1-5 Mode control
185QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
.hsacetarepootelbanE a 0=seY1=oN
:)c+b+a(
D21
.egrahcetarepootelbanE b 0=seY2=oN
.kcehcetarepootelbanE c 0=seY4=oN
.tidercetarepootelbanE a 0=seY1=oN :
)b+a(D
11.ecnalabwenetarepootelbanE b 0=seY4=oN
.yriuqniecirpetarepootelbanE a 0=seY2=oN :
)b+a(D
01.yriuqnikcotsetarepootelbanE b 0=seY4=oN
.llacerretcarahcetarepootelbanE a 0=seY1=oN
:)c+b+a(
D9
.tnirpretcarahcetarepootelbanE b 0=seY2=oN
.tnirpkcehcetarepootelbanE c 0=seY4=oN
.refsnartkrelcetarepootelbanE a 0=seY1=oN
:)c+b+a(
D8
.refsnartelbatetarepootelbanE b 0=seY2=oN
.pitetarepootelbanE c 0=seY4=oN
.tpiecerlamronetarpootelbanE0=seY1=oN
:D
7
.naoletarepootelbanE a 0=seY1=oN
:)c+b+a(
D6
.tnuoccanodevieceretarepootelbanE b 0=seY2=oN
.tuodiapetarepootelbanE c 0=seY4=oN
.pukcipetarepootelbanE a 0=seY1=oN :
)b+a(D
5.nopuocetarepootelbanE b 0=seY2=oN
.tisopedetarepootelbanE a 0=seY1=oN :
)b+a(D
4.sunimetarepootelbanE b 0=seY4=oN
.sunimtnecrepetarepootelbanE a 0=seY1=oN
:)c+b+a(
D3
.sulpetarepootelbanE b 0=seY2=oN
.sulptnecrepetarepootelbanE c 0=seY4=oN
.dnuferetarepootelbanE0=seY4=oN
:D
2
.2nopuocetarepootelbanE0=seY4=oN
:D
1
A-3-7-1-6 Function control 1
186
File Format
noitpircseD eciohC margorPedoc
.noitadilavetarepootelbanE a 0=seY1=oN
:)c+b+a(
D21
.tpieceretarepootelbanE b 0=seY2=oN
.esrodnekcehcetarepootelbanE c 0=seY4=oN
.ddanonetarepootelbanE a 0=seY1=oN
:)c+b+a(
D11
.elason/ddanonetarepootelbanE b 0=seY2=oN
.elasonetarepootelbanE c 0=seY4=oN
remotsucfo.oNetarepootelbanE a 0=seY1=oN
:)c+b+a(
D01
.tnemegnarraetarepootelbanE b 0=seY2=oN
.egnahcxeycnerrucetarepootelbanE c 0=seY4=oN
.TAVetarepootelbanE a 0=seY1=oN :
)b+a(D
9.ypocllibetarepootelbanE b 0=seY2=oN
."0"syawlA ;D
8
.esaeler/deefkcabpilsetarepootelbanE0=seY4=oN
:D
7
.tnirppilsetarepootelbanE a 0=seY1=oN
:)c+b+a(
D6
.esaeler/deefpilsetarepootelbanE b 0=seY2=oN
.tfihsxatetarepootelbanE c 0=seY4=oN
.rebmunelbatetarepootelbanE0=seY4=oN
:D
5
.noitaralcedyenometarepootelbanE a 0=seY1=oN :
)b+a(D
4.tpmexexatetarepootelbanE b 0=seY2=oN
.tfihsunemetarepootelbanE0=seY1=oN
:D
3
.nepoCLetarepootelbanE a 0=seY1=oN
:)c+b+a(
D2
.nepoteserpetarepootelbanE b 0=seY2=oN
.@ts1etarepootelbanE c 0=seY4=oN
.@dn2etarepootelbanE a 0=seY1=oN :
)b+a(D
1.oNkrelcetarepootelbanE b 0=seY4=oN
A-3-7-1-7 Function control 2
187QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
.Z/XrotarepoetarepootelbanE a 0=seY1=oN :
)b+a(D
31.latotbusetarepootelbanE b 0=seY4=oN
.ffo/notpieceretarepootelbanE a 0=seY1=oN
:)c+b+a(
D21
.TS/ATetarepootelbanE b 0=seY2=oN
.oNrotarepoetarepootelbanE c 0=seY4=oN
.TS/DMetarepootelbanE0=seY2=oN
:D
11
.XetarepootelbanE a 0=seY1=oN
:)c+b+a(
D01
.roF/XetarepootelbanE b 0=seY2=oN
.XX/XetarepootelbanE c 0=seY4=oN
.XXX/XetarepootelbanE a 0=seY1=oN :
)b+a(D
9.noBnetteKetarepootelbanE b 0=seY2=oN
.TSmetievitcelesetarepootelbanE0=seY1=oN
:D
8
"0"syawlA ;;D
7D
6
.kcehcwenetarepootelbanE a 0=seY1=oN
:)c+b+a(
D5
.kcehcdloetarepootelbanE b 0=seY2=oN
.kcehcdlo/wenetarepootelbanE c 0=seY4=oN
.kcehcddaetarepootelbanE a 0=seY1=oN :
)b+a(D
4.kcehcetarapesetarepootelbanE b 0=seY2=oN
"0"syawlA ;;D
3D
2
.tuo/ni-kcolcetarepootelbanE a 0=seY1=oN :
)b+a(D
1.tuo/ni-kaerbetarepootelbanE b 0=seY2=oN
A-3-7-1-8 Function control 3
188
File Format
noitpircseD eciohC margorPedoc
.noitutitsbusetarepootelbanE a 0=seY1=oN
:)c+b+a(
D21
.tnirpPKetarepootelbanE b 0=seY2=oN
.noBesuoHetarepootelbanE c 0=seY4=oN
"0"syawlA ;D
11
.kcehcneporotarepoetarepootelbanE a 0=seY1=oN
:)c+b+a(
D01
.egnahcaidemetarepootelbanE b 0=seY2=oN
.rebmuntaesetarepootelbanE c 0=seY4=oN
.ffo/noyalpsidetarepootelbanE a 0=seY1=oN
:)c+b+a(
D9
.edomGERetarepootelbanE b 0=seY2=oN
edomZ/XetarepootelbanE c 0=seY4=oN
.edomMGPetarepootelbanE0=seY1=oN
:D
8
.yrtnetsopetarepootelbanE a 0=seY1=oN
:)c+b+a(
D7
.taeperdnuoretarepootelbanE b 0=seY2=oN
.ni-taeetarepootelbanE c 0=seY4=oN
.tuo-ekatetarepootelbanE a 0=seY1=oN
:)c+b+a(
D6
.erotsetarepootelbanE b 0=seY2=oN
.llaceretarepootelbanE c 0=seY4=oN
.yalpsidesreveretarepootelbanE a 0=seY1=oN :
)b+a(D
5.OMEM-JetarepootelbanE b 2=seY0=oN
.noitisopemohetarepootelbanE a 0=seY1=oN :
)b+a(D
4.egnahcedomyalpsidetarepootelbanE b 0=seY2=oN
"0"syawlA ;D
3
.noitcasnartsihtfodiovllaetarepootelbanE0=seY4=oN
:D
2
.tpiecersihtfopotehtmorfdiovllaetarepootelbanE0=seY1=oN
:D
1
A-3-7-1-9 Function control 4
189QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
.ecirpetarepootelbanE a 0=seY1=oN
:)c+b+a(
D21
.oNULPetarepootelbanE b 0=seY2=oN
.oNtnemtrapedbusetarepootelbanE c 0=seY4=oN
.oNtnemtrapedetarepootelbanE a 0=seY1=oN :
)b+a(D
11.oNtsiletarepootelbanE b 0=seY2=oN
.ULPhcuotetarepootelbanE a 0=seY1=oN
:)c+b+a(
D01
.tnemtrapedhcuotetarepootelbanE b 0=seY2=oN
.tnemtrapedbushcuotetarepootelbanE c 0=seY4=oN
.tsilhcuotetarepootelbanE0=seY1=oN
:D
9
"0"syawlA ;;;;D
8D
7D
6D
5
"0"syawlA ;;;;D
4D
3D
2D
1
A-3-7-1-10 Function control 5
190
File Format
noitpircseD eciohC margorPedoc
.1puorgegnarraetarepootelbanE a 0=seY1=oN
:)c+b+a(
D21
.2puorgegnarraetarepootelbanE b 0=seY2=oN
.3puorgegnarraetarepootelbanE c 0=seY4=oN
.4puorgegnarraetarepootelbanE a 0=seY1=oN
:)c+b+a(
D11
.5puorgegnarraetarepootelbanE b 0=seY2=oN
.6puorgegnarraetarepootelbanE c 0=seY4=oN
.7puorgegnarraetarepootelbanE a 0=seY1=oN
:)c+b+a(
D01
.8puorgegnarraetarepootelbanE b 0=seY2=oN
.9puorgegnarraetarepootelbanE c 0=seY4=oN
.01puorgegnarraetarepootelbanE0=seY1=oN
:D
9
"0"syawlA ;;;;D
8D
7D
6D
5
"0"syawlA ;;;;D
4D
3D
2D
1
A-3-7-1-11 Arrangement control
191QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
.troperXyliadeussiotelbanE a 0=seY1=oN :
)b+a(D
21.troperZyliadeussiotelbanE b 0=seY2=oN
.troperX1cidoirepeussiotelbanE a 0=seY1=oN :
)b+a(D
11.troperZ1cidoirepeussiotelbanE b 0=seY2=oN
.troperX2cidoirepeussiotelbanE a 0=seY1=oN :
)b+a(D
01.troperZ2cidoirepeussiotelbanE b 0=seY2=oN
.troperXelifnoitadilosnoceussiotelbanE a 0=seY1=oN :
)b+a(D
9.troperZelifnoitadilosnoceussiotelbanE b 0=seY2=oN
.troper1Z/XhctabeussiotelbanE a 0=seY1=oN
:)c+b+a(
D8
.troper2Z/XhctabeussiotelbanE b 0=seY2=oN
.troper3Z/XhctabeussiotelbanE c 0=seY4=oN
.troper4Z/XhctabeussiotelbanE a 0=seY1=oN
:)c+b+a(
D7
.troper5Z/XhctabeussiotelbanE b 0=seY2=oN
.troper6Z/XhctabeussiotelbanE c 0=seY4=oN
.troper7Z/XhctabeussiotelbanE a 0=seY1=oN
:)c+b+a(
D6
.troper8Z/XhctabeussiotelbanE b 0=seY2=oN
.troper9Z/XhctabeussiotelbanE c 0=seY4=oN
.troper01Z/XhctabeussiotelbanE0=seY1=oN
:D
5
.troperXrotarepoeussiotelbanE a 0=seY1=oN :
)b+a(D
4.troperZrotarepoeussiotelbanE b 0=seY2=oN
"0"syawlA ;;D
3D
2
.elifybtroperZ/XeussiotelbanE a 0=seY1=oN
:)c+b+a(
D1
.troperZ/XlaudividnieussiotelbanE b 0=seY2=oN
.troperZ/XlaudividnirehtoeussiotelbanE c 0=seY4=oN
A-3-7-1-12 Report control
192
File Format
noitpircseD eciohC margorPedoc
.noitareporeganamelbasiD0=oN1=seY
:D
01
"0"syawlA ;;;D
9D
8D
7
noitadilosnoc/noitcellocenilnielbasiD a 0=oN1=seY
:D
6
)c+b+a(
daolnwod/daolpuatadmargorpenilnielbasiD b 0=oN2=seY
gnidnesatadkcehcenilnielbasiD c 0=oN4=seY
"0"syawlA ;;D
5D
4
"0"syawlA ;;;D
3D
2D
1
Counter Totalizer
0 5 10
Rec
ord
No.
File
No.
0 2 4
A-3-7-1-13 Manager control
A-3-7-2 Clerk detail (daily, periodic/consolidation)
File name: Clerk detail (daily) File No.: 011 Max. allocatable records: 99File name: Clerk detail (periodic 1) File No.: 111 Max. allocatable records: 99File name: Clerk detail (periodic 2) File No.: 211 Max. allocatable records: 99File name: Clerk detail (daily consolidation) File No.: 311 Max. allocatable records: 99File name: Clerk detail (periodic 1 consolidation) File No.: 411 Max. allocatable records: 99File name: Clerk detail (periodic 2 consolidation) File No.: 511 Max. allocatable records: 99File name: Clerk detail (consolidation work) File No.: 611 Max. allocatable records: 99
A-3-7-3 Clerk detail link
File name: Clerk detail link File No.: 030 Max. allocatable records: 120
193QT-2000 Reference Manual
A-3-8. Hourly sales file
A-3-8-1 Hourly sales (daily, periodic/consolidation)
File name: Hourly sales (daily) File No.: 009 Max. allocatable records: 999File name: Hourly sales (periodic 1) File No.: 109 Max. allocatable records: 999File name: Hourly sales (periodic 2) File No.: 209 Max. allocatable records: 999File name: Hourly sales (daily consolidation) File No.: 309 Max. allocatable records: 999File name: Hourly sales (periodic 1 consolidation) File No.: 409 Max. allocatable records: 999File name: Hourly sales (periodic 2 consolidation) File No.: 509 Max. allocatable records: 999File name: Hourly sales (consolidation work) File No.: 609 Max. allocatable records: 999
A-3-9. Monthly sales file
A-3-9-1 Monthly sales (daily, periodic/consolidation)
File name: Monthly sales (daily) File No.: 010 Max. allocatable records: 32 (fixed)File name: Monthly sales (periodic 1) File No.: 110 Max. allocatable records: 32 (fixed)File name: Monthly sales (periodic 2) File No.: 210 Max. allocatable records: 32 (fixed)File name: Monthly sales (daily consolidation) File No.: 310 Max. allocatable records: 32 (fixed)File name: Monthly sales (periodic 1 consolidation) File No.: 410 Max. allocatable records: 32 (fixed)File name: Monthly sales (periodic 2 consolidation) File No.: 510 Max. allocatable records: 32 (fixed)File name: Monthly sales (consolidation work) File No.: 610 Max. allocatable records: 32 (fixed)
Counter Totalizer
0 5 10 15
No. ofcustomer
Merchandisesubtotal
20
Counter(Gross)
Totalizer(Gross)
Counter(Net)
Totalizer(Net)
0 5 10 15 20
194
File Format
A-3-10. Hourly item file
A-3-10-1 Hourly item
File name: Hourly Item (daily) File No.: 021 Max. allocatable records: 1920File name: Hourly Item (periodic 1) File No.: 121 Max. allocatable records: 1920File name: Hourly Item (periodic 2) File No.: 221 Max. allocatable records: 1920File name: Hourly Item (daily consolidation) File No.: 321 Max. allocatable records: 1920File name: Hourly Item (periodic 1 consolidation) File No.: 421 Max. allocatable records: 1920File name: Hourly Item (periodic 2 consolidation) File No.: 521 Max. allocatable records: 1920File name: Hourly Item (consolidation work) File No.: 621 Max. allocatable records: 1920
A-3-10-2 Hourly item link
File name: Hourly Item Link File No.: 031 Max. allocatable records: 480
A-3-10-3 Hourly/Labor
File name: Hourly/Labor File No.: 014 Max. allocatable records: 96
Am
ount
0 5
QTY
/No
10
FILE
No.
0 2 4
REC
OR
D N
o.
NET
Am
ount
Tota
l Lab
orH
ours
(Fix
ed)
0 5 10 13 18 21 26
NET
No.
Tota
l Lab
orC
ost (
Fixe
d)
Tota
l Lab
orH
ours
(Not
Fix
ed)
Tota
l Lab
orC
ost (
Not
Fix
ed)
noitpircseD eciohC margorPedoc
.oNdrocerkniL ::::D
8D
7D
6D
5
”0“syawlA :D
4
.oNelifkniL :::D
3D
2D
1
195QT-2000 Reference Manual
A-3-11. Work time file
File name: Work Time File No.: 019 Max. allocatable records: 9999File name: Work Time (periodic 1) File No.: 119 Max. allocatable records: 9999File name: Work Time (periodic 2) File No.: 219 Max. allocatable records: 9999File name: Work Time (daily consolidation) File No.: 319 Max. allocatable records: 9999File name: Work Time (periodic 1 consolidation) File No.: 419 Max. allocatable records: 9999File name: Work Time (periodic 2 consolidation) File No.: 519 Max. allocatable records: 9999File name: Work Time (consolidation work) File No.: 619 Max. allocatable records: 9999
Mim. number of files to fix the work time: The number of employee × 7 days × 3 shift × 2weeksMax. allocatable records: 99 × 3 × 7 × 2 = 4158
REC#001~#003: Correspond to Monday of Employee REC#001 (First week)REC#004~#006: Correspond to Tuesday of Employee REC#001(First week)REC#007~#009: Correspond to Wednesday of Employee REC#001 (First week)REC#010~#012: Correspond to Thursday of Employee REC#001 (First week)REC#013~#015: Correspond to Friday of Employee REC#001 (First week)REC#016~#018: Correspond to Saturday of Employee REC#001 (First week)REC#019~#021: Correspond to Sunday of Employee REC#001 (First week)REC#020~#024: Correspond to Monday of Employee REC#001 (Second week)REC#025~#027: Correspond to Tuesday of Employee REC#001 (Second week)REC#028~#030: Correspond to Wednesday of Employee REC#001 (Second week)REC#031~#033: Correspond to Thursday of Employee REC#001 (Second week)REC#034~#036: Correspond to Friday of Employee REC#001 (Second week)REC#037~#039: Correspond to Saturday of Employee REC#001 (Second week)REC#040~#042: Correspond to Sunday of Employee REC#001 (Second week)
REC#043~#045: Correspond to Monday of Employee REC#002 (First week) • • •
CLO
CK
-IN
Dat
e
WO
RK
Tim
e
0 1 4 6 8 13 17
BREA
K T
ime
Job
Cod
e
CLO
CK
-IN
Tim
e
CLO
CK
-OU
TTi
me
Cas
h Ti
pD
ecla
re
15
196
File Format
A-3-13. IDC file
A-3-13-1 IDC file (1)
File name: IDC (1) File No.: 057 Max. allocatable records: 9999File name: IDC (1) (daily consolidation) File No.: 357 Max. allocatable records: 9999
A-3-13-2 IDC file (2)
File name: IDC (2) File No.: 058 Max. allocatable records: 9999File name: IDC (2) File No.: 358 Max. allocatable records: 9999File structure is same as IDC file (1)
A-3-13-3 IDC file (3)
File name: IDC (3) File No.: 059 Max. allocatable records: 9999File name: IDC (3) File No.: 359 Max. allocatable records: 9999File structure is same as IDC file (1)
A-3-13-4 IDC buffer
File name: IDC Buffer File No.: 063 Max. allocatable records: 9999
0 50
IDC Data
noitpircseD eciohC margorPedoc
"0"syawlA ;D
21
elifkniLCDIyficepS3=)3(CDI,2=)2(CDI,1=)1(CDI,0=kniloN
tnacifingiSrebmun
:D
11
"0"syawlA ;D
01
:CDIroftegraT1=noitcnuf/metiylnO,0=snoitcasnartllA
tnacifingiSrebmun
:D
9
CDIroftegratehtfo.oNdroceRtnacifingiS
rebmun::::
D8
D7
D6
D5
"0"syawlA ;D
4
CDIroftegratehtfo.oNeliFtnacifingiS
rebmun:::
D3
D2
D1
0 50
IDC Data
197QT-2000 Reference Manual
A-3-13-5 IDC link
File name: IDC link File No.: 804 Max. allocatable records: 999
END
TIM
E
0 2
STA
RT
TIM
E
4
CY
CLE
6
noitpircseD eciohC margorPedoc
)ruoH(emiTtratSenoZ 32~00 ::D
21D
11
)95~00()etuniM(emiTtratSenoZ 95~00 ::D
01D
9
)32~00()ruoH(emiTdnEenoZ 32~00 ::D
8D
7
)95~00()etuniM(emiTdnEenoZ 95~00 ::D
6D
5
)32~00()ruoH(elcyCenoZ 32~00 ::D
4D
3
)54,03,51,00()etuniM(elcyCenoZ 54,03,51,00 ::D
2D
1
A-3-14. Time zone file
File name: Time Zone File No.: 800 Max. allocatable records: 24
Devide one day into some time zones, and assign the length of one sycle per zone.
PGM
0 1
LIN
K
2
File
No.
Rec
ord
No.
4 6
198
File Format
0 3
Empl
oyee
No.
19
Socia
l Sec
urity
No.
JOB
Cod
e (1
)PG
M
24 25 26 27
JOB
Cod
e (3
)JO
B C
ode
(2)
JOB
Cod
e (4
)
Wor
k (1
)
Wor
k (2
)
Wor
k (3
)
30 34 36 38 40
Character
noitpircseD eciohC margorPedoc
)999999~000000:stigid-6anihtiw(.oNeeyolpmE)rebmuntcelesonsnaem"000000"(
432100)ge.derongisi”orez“gnidaeR → 4321
tnacifingiSrebmun
:::D
44D
34D
24
:::D
14D
04D
93
)stiged-61(retcarahCtnacifingiS
retcarahc:
D83
D~32
)stiged-01anihtiw(.oNytiruceSlaicoS7654321000)ge.derongitonsi”orez“gnidaeR → 7654321000
tnacifingiSrebmun
:D
22D~
31
edoCboJyficepS a 0=oN1=seY
:)c+b+a(
D21
edoCboJtuohtiwni-kcolC b 0=oN2=seY
noitareponi-kcolCgnirudwodniwedoCboJehtesU c 0=oN4=seY
eeyolpmeroniM0=oN1=seY
:D
11
)99~00(1edoCboJ)rebmuntcelesonsnaem"00"(
tnacifingiSrebmun
::D
01D
9
)99~00(2edoCboJ)rebmuntcelesonsnaem"00"(
tnacifingiSrebmun
::D
8D
7
)99~00(3edoCboJ)rebmuntcelesonsnaem"00"(
tnacifingiSrebmun
::D
6D
5
)99~00(4edoCboJ)rebmuntcelesonsnaem"00"(
tnacifingiSrebmun
::D
4D
3
)99~00(rebmundrocerkrelC/reihsaCtnacifingiS
rebmun::
D2
D1
A-3-15. Employee file
File name: Employee File No.: 801 Max. allocatable records: 99
199QT-2000 Reference Manual
A-3-16. Job code file
File name: Job code File No.: 801 Max. allocatable records: 99
noitpircseD eciohC margorPedoc
).gnittesonsnaemretcarahcoN()tigid-61anihtiw(retcarahCtnacifingiS
retcarahc:
D82~ D
31
noitarepotuo-kcolCgnirudyroslupmocnoitaralceDpiT0=oN1=seY
:D
21
"0"syawlA ;D
11
)99.9999$~00.0$(etaryaPtnacifingiS
rebmun:
D01
D~5
)99.99$~00.0$(oitaryaPemitrevO)"00.1$"snaem"00.0$"(
tnacifingiSrebmun
::::D
4D
3D
2D
1
Pay
Rat
e
0 16
PGM
17
Over
Time P
ay R
atio
20 22
Character
A-3-17. Schedule file
File name: Schedule File No.: 803 Max. allocatable records: 999
Mim. number of files to fix the work time: The number of employee × 7 days × 3 shift × 2weeksMax. allocatable records: 99 × 3 × 7 × 2 = 4158
REC#001: Correspond to Monday Shift 1 of Employee REC#001REC#002: Correspond to Monday Shift 2 of Employee REC#001REC#003: Correspond to Monday Shift 3 of Employee REC#001
REC#004: Correspond to Tuesday Shift 1 of Employee REC#001REC#005: Correspond to Tuesday Shift 2 of Employee REC#001REC#006: Correspond to Tuesday Shift 3 of Employee REC#001 • •REC#021: Correspond to Sunday Shift 3 of Employee REC#001
REC#022: Correspond to Monday Shift 1 of Employee REC#002REC#023: Correspond to Monday Shift 2 of Employee REC#002REC#024: Correspond to Monday Shift 3 of Employee REC#002
REC#025: Correspond to Tuesday Shift 1 of Employee REC#002REC#026: Correspond to Tuesday Shift 2 of Employee REC#002REC#027: Correspond to Tuesday Shift 3 of Employee REC#002* When 00 is entered, Grace Before/After Start/End time are recognized unlimitedly.
STA
RT
Tim
e
0 1
JOB
Cod
e
3
BREA
K T
ime
END
Tim
e
Grac
e Befo
re St
art
5 7 8 9 10 11
Grac
e Afte
r Sta
rt
Grac
e Befo
re E
ndGr
ace A
fter E
nd
200
File Format
noitpircseD eciohC margorPedoc
)99~00(edoCboJ)rebmuntcelesonsnaem"00"(
tnacifingiSrebmun
::D
22D
12
)32~00()ruoh(emiTtratStnacifingiS
rebmun::
D02
D91
)95~00()etunim(emiTtratStnacifingiS
rebmun::
D81
D71
)32~00()ruoh(emiTdnEtnacifingiS
rebmun::
D61
D51
)95~00()etunim(emiTdnEtnacifingiS
rebmun::
D41
D31
)32~00()ruoh(emiTkaerBtnacifingiS
rebmun::
D21
D11
)95~00()etunim(emiTkaerBtnacifingiS
rebmun::
D01
D9
)95~00()etunim(tratSerofeBecarGtnacifingiS
rebmun::
D8
D7
)95~00()etunim(tratSretfAecarGtnacifingiS
rebmun::
D6
D5
)95~00()etunim(dnEerofeBecarGtnacifingiS
rebmun::
D4
D3
)95~00()etunim(dnEretfAecarGtnacifingiS
rebmun::
D2
D1
201QT-2000 Reference Manual
A-3-18. Void table file
A-3-18-1 Void table (daily)
File name: Monthly sales (daily) File No.: 012 Max. allocatable records: 99
A-3-18-2 Void table (periodic/consolidation)
File name: Monthly sales (periodic 1) File No.: 112 Max. allocatable records: 99File name: Monthly sales (periodic 2) File No.: 212 Max. allocatable records: 99File name: Monthly sales (daily consolidation) File No.: 312 Max. allocatable records: 99File name: Monthly sales (periodic 1 consolidation) File No.: 412 Max. allocatable records: 99File name: Monthly sales (periodic 2 consolidation) File No.: 512 Max. allocatable records: 99File name: Monthly sales (consolidation work) File No.: 612 Max. allocatable records: 99
Character Counter
Pro
gram
Totalizer
0 16 19 24 29
Counter Totalizer
0 5 10
noitpircseD eciohC margorPedoc
.eulavkcotsnruteR0=seY1=oN
:D
1
202
File Format
Totalizer
0 8
A-3-19. Table analysis file
A-3-19-1 Table analysis (daily)
File name: Table analysis (daily) File No.: 018 Max. allocatable records: 9999
A-3-19-2 Table analysis (periodic/consolidation)
File name: Table analysis (periodic 1) File No.: 118 Max. allocatable records: 9999File name: Table analysis (periodic 2) File No.: 218 Max. allocatable records: 9999File name: Table analysis (daily consolidation) File No.: 318 Max. allocatable records: 9999File name: Table analysis (periodic 1 consolidation) File No.: 418 Max. allocatable records:9999File name: Table analysis (periodic 2 consolidation) File No.: 518 Max. allocatable records:9999File name: Table analysis (consolidation work) File No.: 618 Max. allocatable records:9999
A-3-20. Grand total file
A-3-20-1 Grand total (daily)
File name: Grand total (daily) File No.: 020 Max. allocatable records:3 (fixed)
A-3-20-2 Grand total (consolidation)
File name: Grand total (periodic 1) File No.: 120 Max. allocatable records: 3 (fixed)File name: Grand total (periodic 2) File No.: 220 Max. allocatable records: 3 (fixed)File name: Grand total (daily consolidation) File No.: 320 Max. allocatable records: 3 (fixed)File name: Grand total (periodic 1 consolidation) File No.: 420 Max. allocatable records: 3 (fixed)File name: Grand total (periodic 2 consolidation) File No.: 520 Max. allocatable records: 3 (fixed)File name: Grand total (consolidation work) File No.: 620 Max. allocatable records: 3 (fixed)
Character
Min
. che
ck #
Max
. che
ck #
Counter Totalizer
0 16 19 22 27 32
Counter Totalizer
0 5 10
Character Totalizer
0 16 24
203QT-2000 Reference Manual
Program
0 6
.oNceR stnetnoC100 edomyratenoM,redroetaD
200 rebmunenihcaM
300 rebmunevitucesnoC
400 metsysxaT,gnidnuoR
500 )1(lortnoctpieceR
600 lortnocnoitarepO,noitaluclaC
700 )esuerutuf(
800 )1(lortnoctropeR
900 )2(lortnoctropeR
010 remitlliT
110 )esuerutuf(
210 )3(lortnoctropeR
310 lortnocnoitacinummoC
410 )4(lortnoctropeR
510 )5(lortnoctropeR
610 emarfemiT
710 noitaralcedyenoM,)2(lortnoctpieceR
810 tnirpPK/tseuG/PILS
910 lortnoclanruoJ
020 lortnoctnirpegasseM
120 lortnocredrO
220 )esuerutuf(
320 )esuerutuf(
420 )esuerutuf(
520 tnemidnoC,unemteS
620 gnikcartkcehC
720 tpurretnikrelC
820 lortnocyalpsiD
920 )1(lortnocrebmunteehsuneM
030 )esuerutuf()2(lortnocrebmunteehsuneM
130 )3(lortnocrebmunteehsuneM
230 )4(lortnocrebmunteehsuneM
330 )5(lortnocrebmunteehsuneM
430 )6(lortnocrebmunteehsuneM
530 ecnadnettA&emiT
630 egnarllaceR/erotS
A-3-21. General control file
A-3-21-1 General control
File name: General control File No.: 022 Max. allocatable records:34 (fixed)
204
File Format
noitpircseD eciohC margorPedoc
:redroetaD3=raeY/yaD/htnoM,2=raeY/htnoM/yaD,1/0=yaD/htnoM/raeY
tnacifingiS)3~0(rebmun
:D
21
:edomyratenoM0 ,0= 0º ,1= 00º ,2= 000º 3=
tnacifingiS)3~0(rebmun
:D
11
"0"syawlA ;;;;D
01D
9D
8D
7
"0"syawlA ;;;D
6D
5D
4
"0"syawlA ;;;D
3D
2D
1
noitpircseD eciohC margorPedoc
rebmunenihcaMtnacifingiS
rebmun::::
D4
D3
D2
D1
noitpircseD eciohC margorPedoc
:gnidnuoR,3=kramneD,2=2FI,1=1FI,0=gnidnuoroN
5=eropagniS,4=yawroN
tnacifingiS)5~0(rebmun
:D
01
:metsysxaT,2=adanaC,1=SU,0=TAV
3=eropagniS
tnacifingiS)3~0(rebmun
:D
9
"0"syawlA ;D
8
.noitarepoedom–GER/FRnirednettnuomawollA a 0=seY2=oN :
)b+a(D
7
:gnineporewardhsaC1 .dezilanifsinoitcasnartehtnehwyletaidemmI2 .desaelersiyroslupmocnoitadilavretfA
b 1 0=2 4=
"0"syawlA ;;D
6D
5
ofnoitacificepstimiltnuomahgiH r .tnuomarewardniyenom)noitcnuflenitneS(
mumixaM)9~0(eulav ::
D4
D3forebmuN
)9~0(sorez
"0"syawlA ;;D
2D
1
A-3-21-1-1 Date order, monetary mode
A-3-21-1-2 Machine number
A-3-21-1-3 Rounding, Tax system
205QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
sitroperteserrezilatotdexifyliadretfarebmunevitucesnocteseR.deussi
1=seY0=oN
:D
8
"0"syawlA ;D
7
:eulavtratsrebmunevitucesnoC
:::D
6D
5D
4
:::D
3D
2D
1
noitpircseD eciohC margorPedoc
.noitazilanifgnirudenillatottnirP a 0=seY1=oN
:)c+b+a(
D01
:metmsysemiT1 ,metsysruoh42 2 metsysruoh21
b 1 0=2 2=
.tpiecergniussiretfaenilenodeeF c 0=oN4=seY
.1tnuomaelbaxattnirP a 0=seY1=oN
:)c+b+a(
D9
.2tnuomaelbaxattnirP b 0=seY2=oN
.3tnuomaelbaxattnirP c 0=seY4=oN
.4tnuomaelbaxattnirP a 0=seY1=oN
:)c+b+a(
D8
.5tnuomaelbaxattnirP b 0=seY2=oN
.gnitnirpunemtesnwod-kaerB c 0=oN4=seY
"0"syawlA ;;;D
7D
6D
5
.dlosmetiforebmuntnirP a 0=oN1=seY :
)b+a(D
4.slobmysxattnirP b 0=seY2=oN
"0"syawlA ;D
3
.tpiecernoecirptinutnirP0=oN4=seY
:D
2
.noitarepoyekraelctnirP a 0=oN1=seY
:)c+b+a(
D1
.redaehnosremotsucforebmuntnirP b 0=seY2=oN
.tpiecerno.oNULPtnirP c 0=oN4=seY
A-3-21-1-4 Consecutive number
A-3-21-1-5 Receipt control (1)
206
File Format
noitpircseD eciohC margorPedoc
ehtot–/+fosutatsnoissimmocdnasutatselbaxatehtwolloF.metisuoiverp a 0=seY
1=oN:
)c+b+a(D
21
.tigidtsalehtno5ro0tcirtseR b 0=oN2=seY
.ecnadiugrotarepoyalpsiD c 0=seY4=oN
"0"syawlA ;D
11
.rewardniyenomehteralcedotecroF0=oN4=seY
:D
01
.noitazilaniferofeblatotbussserpotecroF a 0=oN1=seY
:)c+b+a(
D9
.noitazilanifelihwecnalabtidercwollA b 0=seY2=oN
.noitarepoedomsunimretsiger/dnuferelpitlumwollA c 0=seY4=oN
.metiehtot–%/+%,–/+fotluserehttceffA a 0=oN1=seY :
)b+a(D
8.latottennixatno-ddaedulcnI b 0=seY2=oN
.latottenninoissimmocedulcnI0=seY2=oN
:D
7
.enothctacyeksdnuoS a 0=seY2=oN :
)b+a(D
6.deussisienolanigiroehtfineve,tpiecertsopeussiotwollA b 0=oN4=seY
.rewardtilstcennoC0=oN4=seY
:D
5
semocebytitnauqkcotsehtnehwnoitartsigertibihorP.evitagen a 0=oN
2=seY :)b+a(
D4
kcotsmuminimrednusemocebytitnauqkcotsehtnehwtrelA.ytitnauq b 0=oN
4=seY
.noitarepodnuferehtfineveytitnauqkcotsottceffA a 0=oN1=seY
:)c+b+a(
D3
.enolanigiroehtotnoitartsigermetidiov/dnuferegreM b 0=oN2=seY
.noitcasnartenorep–%/+%,–/+fonoitartsigerenowollA c 0=oN4=seY
.noitartsiger–%/+%fotigidtnacifingistsaelehtnodnuoR a 0=oN1=seY :
)b+a(D
2(.rotarapesyalpsiD erutuf ) b 0=seY2=oN
.gnineporewardyroslupmocelihwyrtneciremunwollA a 0=seY1=oN
:)c+b+a(
D1
.metinatcelesotyekSEYesU b 0=seY2=oN
:gnirebmunULP4=edocmodnaryB,0=)laitneuqeS(.oNyromemyB c tnacifingiS
rebmun
A-3-21-1-6 Calculations, Operation control
207QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
.troperdaerrezilatotdexifyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
21
.troperdaernoitcasnartyalpsiD/tnirP b0=tnirP
2=yalpsiD
.troperdaertnemtrapedbus/tnemtrapedyalpsiD/tnirP c0=tnirP
4=yalpsiD
.troperdaerkcots/ULPyalpsiD/tnirP a0=tnirP
1=yalpsiD :)b+a(
D11
.troperdaerpuorgyalpsiD/tnirP b0=tnirP
4=yalpsiD
.troperdaerkrelcyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
01
.troperdaerylhtnom/ylruohyalpsiD/tnirP b0=tnirP
2=yalpsiD
.troperdaerkcehcnepoyalpsiD/tnirP c0=tnirP
4=yalpsiD
.troperdaersisylanaelbatyalpsiD/tnirP a0=tnirP
1=yalpsiD :)b+a(
D9
.troperdaeryromemlanruojyalpsiD/tnirP b0=tnirP
4=yalpsiD
.troperdaermetiylruohyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
8
.troperdaereeyolpmeyalpsiD/tnirP b0=tnirP
2=yalpsiD
.troperdaerrobal/ylruohyalpsiD/tnirP c0=tnirP
4=yalpsiD
.troperteserrezilatotdexifyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
7
.tropertesernoitcasnartyalpsiD/tnirP b0=tnirP
2=yalpsiD
.tropertesertnemtrapedbus/tnemtrapedyalpsiD/tnirP c0=tnirP
4=yalpsiD
.troperteserkcots/ULPyalpsiD/tnirP a0=tnirP
1=yalpsiD :)b+a(
D6
.troperteserpuorgyalpsiD/tnirP b0=tnirP
4=yalpsiD
.troperteserkrelcyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
5
.troperteserylhtnom/ylruohyalpsiD/tnirP b0=tnirP
2=yalpsiD
.troperteserkcehcnepoyalpsiD/tnirP c0=tnirP
4=yalpsiD
.tropertesersisylanaelbatyalpsiD/tnirP a0=tnirP
1=yalpsiD :)b+a(
D4
.troperteseryromemlanruojyalpsiD/tnirP b0=tnirP
4=yalpsiD
.troperdaersisylanaelbatyalpsiD/tnirP a0=tnirP
1=yalpsiD :)b+a(
D3
.troperdaeryromemlanruojyalpsiD/tnirP b0=tnirP
4=yalpsiD
.troperdaermetiylruohyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
2
.troperdaereeyolpmeyalpsiD/tnirP b0=tnirP
2=yalpsiD
.troperdaerrobal/ylruohyalpsiD/tnirP c0=tnirP
4=yalpsiD
.troperdaerytivitcaeeyolpmeyalpsiD/tnirP a0=tnirP
2=yalpsiD:
)c+b+a(D
1.troperlaicnanifyalpsiD/tnirP b
0=tnirP4=yalpsiD
A-3-21-1-7 Report control (1)
208
File Format
noitpircseD eciohC margorPedoc
.1tnuomaelbaxattnirP a 0=seY1=oN :
)b+a(D
21.1xattnirP b 0=seY2=oN
.2tnuomaelbaxattnirP a 0=seY1=oN :
)b+a(D
11.2xattnirP b 0=seY2=oN
.3tnuomaelbaxattnirP a 0=seY1=oN :
)b+a(D
01.3xattnirP b 0=seY2=oN
.4tnuomaelbaxattnirP a 0=seY1=oN :
)b+a(D
9.4xattnirP b 0=seY2=oN
.5tnuomaelbaxattnirP a 0=seY1=oN :
)b+a(D
8.5xattnirP b 0=seY2=oN
"0"syawlA ;;;;D
7D
6D
5D
4
"0"syawlA ;;;D
3D
2D
1
noitpircseD eciohC margorPedoc
)setunim95~00(remitlliTtnacifingiS
srebmun::
D4
D3
)sdnoces95~00(remitlliTtnacifingiS
srebmun::
D2
D1
A-3-21-1-8 Report control (2)
A-3-21-1-9 Till timer
209QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
.)troper2&1cidoirep(1latotdnargtnirP a 0=seY1=oN
:)c+b+a(
D6
.)troper2&1cidoirep(2latotdnargtnirP b 0=seY2=oN
.)troper2&1cidoirep(3latotdnargtnirP c 0=seY4=oN
.)troperyliad(1latotdnargtnirP a 0=seY1=oN
:)c+b+a(
D5
.)troperyliad(2latotdnargtnirP b 0=seY2=oN
.)troperyliad(3latotdnargtnirP c 0=seY4=oN
"0"syawlA ;;;D
4D
3D
2
.troperylhtnomehtfoegarevaehttnirP0=seY1=oN
:D
1
noitpircseD eciohC margorPedoc
.margorpafonoitelpmocretfaatadmargorpehttsacdaorB0=oN1=seY
:D
21
"0"syawlA ;;;D
01D
9D
8
.tlusernoitadilosnoc/noitcellocZtnirP a 0=seY1=oN
:)c+b+a(
D8
.tlusernoitadilosnoc/noitcellocZteseR b 0=seY2=oN
.noitadilosnocZretfaretsamotytitnauqkcotsypoC c 0=oN4=seY
ehtrofdednopsertonsahhcihwlanimretehthtllopotyrteR.gnilloptsrif a 0=seY
2=oN :)b+a(
D7.noitareporetsamenil-niwollA b 0=seY
4=oN
.noitadilosnoc/noitcellocZerofebtropertnirP0=seY4=oN
:D
6
:noitceleselifecruoS1 ,eliflanimreT 2 elifnoitadilosnoC
a 1 0=2 1= :
)b+a(D
5.noitarepoZretfaelifnoitadilosnocehtotddA b 0=seY4=oN
"0"syawlA ;;;;D
4D
3D
2D
1
A-3-21-1-10 Report control (3)
A-3-21-1-11 Communication control
210
File Format
noitpircseD eciohC margorPedoc
.troperdaerrezilatotdexifyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
21
.troperdaernoitcasnartyalpsiD/tnirP b0=tnirP
2=yalpsiD
.troperdaertnemtrapedbus/tnemtrapedyalpsiD/tnirP c0=tnirP
4=yalpsiD
.troperdaerkcots/ULPyalpsiD/tnirP a0=tnirP
1=yalpsiD :)b+a(
D11
.troperdaerpuorgyalpsiD/tnirP b0=tnirP
4=yalpsiD
.troperdaerkrelcyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
01
.troperdaerylhtnom/ylruohyalpsiD/tnirP b0=tnirP
2=yalpsiD
.troperdaerkcehcnepoyalpsiD/tnirP c0=tnirP
4=yalpsiD
.troperdaersisylanaelbatyalpsiD/tnirP a0=tnirP
1=yalpsiD :)b+a(
D9
.troperdaeryromemlanruojyalpsiD/tnirP b0=tnirP
4=yalpsiD
.troperdaermetiylruohyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
8
.troperdaereeyolpmeyalpsiD/tnirP b0=tnirP
2=yalpsiD
.troperdaerrobal/ylruohyalpsiD/tnirP c0=tnirP
4=yalpsiD
.troperteserrezilatotdexifyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
7
.tropertesernoitcasnartyalpsiD/tnirP b0=tnirP
2=yalpsiD
.tropertesertnemtrapedbus/tnemtrapedyalpsiD/tnirP c0=tnirP
4=yalpsiD
.troperteserkcots/ULPyalpsiD/tnirP a0=tnirP
1=yalpsiD :)b+a(
D6
.troperteserpuorgyalpsiD/tnirP b0=tnirP
4=yalpsiD
.troperteserkrelcyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
5
.troperteserylhtnom/ylruohyalpsiD/tnirP b0=tnirP
2=yalpsiD
.troperteserkcehcnepoyalpsiD/tnirP c0=tnirP
4=yalpsiD
.tropertesersisylanaelbatyalpsiD/tnirP a0=tnirP
1=yalpsiD :)b+a(
D4
.troperteseryromemlanruojyalpsiD/tnirP b0=tnirP
4=yalpsiD
.troperdaersisylanaelbatyalpsiD/tnirP a0=tnirP
1=yalpsiD :)b+a(
D3
.troperdaeryromemlanruojyalpsiD/tnirP b0=tnirP
4=yalpsiD
.troperdaermetiylruohyalpsiD/tnirP a0=tnirP
1=yalpsiD:
)c+b+a(D
2
.troperdaereeyolpmeyalpsiD/tnirP b0=tnirP
2=yalpsiD
.troperdaerrobal/ylruohyalpsiD/tnirP c0=tnirP
4=yalpsiD
.troperdaerytivitcaeeyolpmeyalpsiD/tnirP a0=tnirP
2=yalpsiD:
)c+b+a(D
1.troperlaicnanifyalpsiD/tnirP b
0=tnirP4=yalpsiD
A-3-21-1-12 Report control (4)
211QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
.tropertnemtrapedbus/tnemtrapedpiks-oreZ a 0=seY1=oN :
)b+a(D
21.troperkrelcpiks-oreZ b 0=seY2=oN
.tropernoitcasnartpiks-oreZ a 0=seY1=oN
:)c+b+a(
D11
.troperULPpiks-oreZ b 0=seY2=oN
.troperylruohpiks-oreZ c 0=seY4=oN
.troperpuorgpiks-oreZ a 0=seY1=oN
:)c+b+a(
D01
.troperylhtnompiks-oreZ b 0=seY2=oN
.tropersisylanaelbatpiks-oreZ c 0=seY4=oN
.tropermetiylruohpiks-oreZ a 0=seY1=oN :
)b+a(D
9.troperrobalylruohpiks-oreZ b 0=seY2=oN
"0"syawlA ;;;D
8D
7D
6
.troperULPehtno.oNULPtnirP0=oN1=seY
:D
5
.oitarselastnirP a 0=oN1=seY
:)c+b+a(
D4
.troperZelbuodeussI b 0=oN2=seY
xatdnatnuomaelbaxatfotnuomaetaluclac-erehttnirP.tnuoma c 0=oN
4=seY
.troperteserhctabretfakcotsteseR0=oN4=seY
:D
3
.retnuoctesertnirP a 0=seY1=oN
:)c+b+a(
D2
.rezilatottnuocsidmetitnirP b 0=oN2=seY
:troperULPforedrognitnirP1 ,)laitneuqes(.oNyromeM 2 edocmodnaR
c 1 0=2 4=
"0"syawlA ;D
1
A-3-21-1-13 Report control (5)
212
File Format
noitpircseD eciohC margorPedoc
)sruoh32~00(troperylruohfoemitlavretnItnacifingiS
srebmun::::
D8
D7
D6
D5:)setunim95~00(troperylruohfoemitlavretnI
).00:10sastaert"0000"(
)sruoh32~00(troperylruohfoemittratStnacifingiS
srebmun::::
D4
D3
D2
D1)sdnoces95~00(troperylruohfoemittratS
noitpircseD eciohC margorPedoc
(.)hsac(yroslupmocnoitaralcedyenoM erutuf ) a 0=oN1=seY
:)c+b+a(
D01
(.)egrahc(yroslupmocnoitaralcedyenoM erutuf ) b 0=oN2=seY
(.)kcehc(yroslupmocnoitaralcedyenoM erutuf ) c 0=oN4=seY
(.)tiderc(yroslupmocnoitaralcedyenoM erutuf ) a 0=oN1=seY :
)b+a(D
9.053-PUnisretcarahcthgih-elbuodtnirP b 0=oN2=seY
.tpiecertsopnipuorgybsmetideretsigeryfissalC a 0=oN1=seY
:)c+b+a(
D8
.tpiecertsopnitnemtrapedybsmetideretsigeryfissalC b 0=seY2=oN
:tamrofgnitnirpmetideifissalC1 ,latoT 2 liateD
c 1 0=2 4=
.latotbusnoissimmocnitnuomaTAVedulcnI0=oN1=seY
:D
7
:noissimmocfognidnuoR2=pudnuor,1=ffotuc,0=ffodnuoR
tnacifingiSrebmun
:D
6
.gnimmargorpecirptinunisorezowtdneppA0=oN1=seY
:D
5
.tpiecernoetadtnirP a 0=seY1=oN
:)c+b+a(
D4
.lanruojnoetadtnirP b 0=seY2=oN
.lanruoj/tpiecernorebmunevitucesnoctnirP c 0=seY4=oN
.tpiecernoemittnirP a 0=seY1=oN
:)c+b+a(
D3
.lanruojnoemittnirP b 0=seY2=oN
.tpiecernonoitartsigerULP/tnemtrapedemasehtegreM)noitadilosnocmetI( c 0=oN
4=seY
.troper/tpiecertuc-otuA0=oN1=seY
:D
2
A-3-21-1-14 Time frame
A-3-21-1-15 Receipt control (2), Money declaration
213QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
)99~00(pilsfosenilgnitnirpmumixaMtnacifingiS
srebmun::
D01
D9
.tpiecertseug&pilsnopuorgybsmetideretsigeryfissalC a 0=oN1=seY
:)c+b+a(
D8
tseug&pilsnotnemtrapedybsmetideretsigeryfissalC.tpiecer b 0=oN
2=seY
:tamrofgnitnirpmetideifissalC1 ,latoT 2 liateD
c 1 0=2 4=
"0"syawlA ;;D
7D
6
.gnitnirppilsretfadeefkcabpilS a 0=oN1=seY
:)c+b+a(
D5
.gnitnirpnoitadilavretfadeefkcabpilS b 0=oN2=seY
tnemesrodnekcehc/gnitnirpkcehcretfadeefkcabpilS.gnitnirp c 0=oN
4=seY
.tpiecertseug&pilsnoetadtnirP a 0=seY1=oN
:)c+b+a(
D4
.tpiecertseug&pilsnoemittnirP b 0=seY2=oN
.tpiecertseug&pilsno.oNevitucesnoctnirP c 0=seY4=oN
:egnartnirppilS1 ,noitcasnartehtfopotehttA 2 tpiecersihT
a 1 0=2 1=
:)c+b+a(
D3
.dnifenilotuapilselbanE b 0=oN2=seY
tseug&pilsnonoitartsigerULP/tnemtrapedemasehtegreM)noitadilosnocmetI(.tpiecer c 0=oN
4=seY
.senildeefotuapilStnacifingiS
srebmun::
D2
D1
A-3-21-1-16 SLIP/Guest/KP print
214
File Format
noitpircseD eciohC margorPedoc
.)yromemlanruoj(lanruojnoedomgniniartnisnoitarepodroceR0=seY2=oN
:D
2
.rorrelluf/dne-raenyromemlanruoJtrelA0=seY1=oN
:D
1
noitpircseD eciohC margorPedoc
.egassemogoltpiecertnirP a 0=oN1=seY
:)c+b+a(
D21
.egassemlaicremmoctpiecertnirP b 0=oN2=seY
.egassemmottobtpiecertnirP c 0=oN4=seY
.egassemlaicremmocpilstnirP a 0=oN1=seY
:)c+b+a(
D11
.egassemmottobpilstnirP b 0=oN2=seY
.egassemetaidemretnipilstnirP c 0=oN4=seY
.egassempotllibtnirP a 0=oN1=seY
:)c+b+a(
D01
.egassemypocllibtnirP b 0=oN2=seY
.egassemmottobllibtnirP c 0=oN4=seY
:atadogoltpieceR1 ,epytretcarahC 2 epytcihparG
1 0=2 1=
:D
9
"0"syawlA ;;;;D
8D
7D
6D
5
"0"syawlA ;;;;D
4D
3D
2D
1
A-3-21-1-17 Journal control
A-3-21-1-18 Message print control
215QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
.retcarahcredrohtiwredrotnirP a 0=oN1=seY :
)b+a(D
21.tnuomahtiwredrotnirP b 0=oN2=seY
.egassemnobelbuodtnirP a 0=oN1=seY :
)b+a(D
11.redronognitnirpunemtesnwodkaerB b 0=oN4=seY
.nwodsiretnirpredroehtnehwtrelA0=seY1=oN
:D
01
"0"syawlA ;D
9
retnirpnehctiknognitnirperofebrezzubdnuoS0=oN4=seY
:D
8
"0"syawlA ;;;D
7D
6D
5
.redrotuC a 0=oN2=seY :
)b+a(D
4.snehpyhtnirP b 0=oN4=seY
.gniniartgnirudsredrotuptuO a 0=oN2=seY :
)b+a(D
3
redrononoitartsigerULP/tnemtrapedemasehtegreM)noitadilosnocmetI(.tpiecer b 0=oN
4=seY
)9~0(.gnitnirpredroerofebsenildeeffo.oNtnacifingiS
rebmun:D
2
)9~0(.gnitnirpredroretfasenildeeffo.oNtnacifingiS
rebmun:D
1
† Effective only for order master/backup master
A-3-21-1-19 Order control
216
File Format
noitpircseD eciohC margorPedoc
.unemtesnisecirpmetiliatedetaluclaC).kcotsdnaytitnauqylnoetaluclac,"oN"fI(
0=seY2=oN
:D
2
.ULPtnerapstiotULPdlihcfoseititnauqnoitartsigeryebO0=seY2=oN
:D
1
noitpircseD eciohC margorPedoc
:dohtemgnikcartkcehC1 ,.oNkcehC 2 .oNelbaT
a 1 0=2 1=
:)c+b+a(
D9
.ecnalabwenotuamrofreP b 0=oN2=seY
:.oNkcehcfotigidmumixaM1 ,tigid-6 2 tigid-21
c 1 0=2 4=
.ecnalabwenybnoitaluclacxaT0=oN1=seY
:D
8
.kcehcdlogniretsigernehw,ecnalabsuoiverptnirP0=seY2=oN
:D
7
"0"syawlA ;;;D
6D
5D
4
.kcehcdloybnoitartsigerULP/tnemtrapedemasehtegreM)noitadilosnocmetI(
0=oN4=seY
:D
3
"0"syawlA ;D
2
atadmetiehterutpaC0=oN1=seY
:D
1
noitpircseD eciohC margorPedoc
.tpurretnikrelcelbanE0=oN1=seY
:D
21
.rebmunkrelconsahohwkrelcaretsigerotelbanE0=oN4=seY
:D
11
"0"syawlA ;;;;D
01D
9D
8D
7
"0"syawlA ;;;;D
6D
5D
4D
3
.remitffo-ngisotuA).ffo-ngisotuaonsnaem"00",sdnoces99~00(
tnacifingiSsrebmun
::D
2D
1
A-3-21-1-20 Set menu, Condiment
A-3-21-1-21 Check tracking
A-3-21-1-22 Clerk interrupt
217QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
:DCLdn2fonoitubirttA,1=evisulcxekrelcnodengiS,0=DCLdn2oN
,2=evitanretlatpiecerderetsigeR4=yalpsidlanruoJ,3=yalpsidremotsuC
tnacifingiSrebmun
:D
21
.DCLdn2dnats1fostnetnocehtegnahcxeotelbanE0=oN1=seY
:D
11
"0"syawlA ;;;;D
01D
9D
8D
7
"0"syawlA ;;;;D
6D
5D
4D
3
).ffonrutonsnaem"00",setunim95~00(remitffothgilkcaBtnacifingiS
srebmun::
D2
D1
A-3-21-1-23 Display control
218
File Format
noitpircseD eciohC margorPedoc
.teehsunemtnerapts1ehtfo.oNteehStnacifingiS
rebmun:D
21
.1tnerapot1teehsunempudemmuS a 0=oN1=seY
:)c+b+a(
D11
.1tnerapot2teehsunempudemmuS b 0=oN2=seY
.1tnerapot3teehsunempudemmuS c 0=oN4=seY
.1tnerapot4teehsunempudemmuS a 0=oN1=seY
:)c+b+a(
D01
.1tnerapot5teehsunempudemmuS b 0=oN2=seY
.1tnerapot6teehsunempudemmuS c 0=oN4=seY
.1tnerapot7teehsunempudemmuS a 0=oN1=seY :
)b+a(D
9.1tnerapot8teehsunempudemmuS b 0=oN2=seY
.teehsunemtnerapdn2ehtfo.oNteehStnacifingiS
rebmun:D
8
.2tnerapot1teehsunempudemmuS a 0=oN1=seY
:)c+b+a(
D7
.2tnerapot2teehsunempudemmuS b 0=oN2=seY
.2tnerapot3teehsunempudemmuS c 0=oN4=seY
.2tnerapot4teehsunempudemmuS a 0=oN1=seY
:)c+b+a(
D6
.2tnerapot5teehsunempudemmuS b 0=oN2=seY
.2tnerapot6teehsunempudemmuS c 0=oN4=seY
.2tnerapot7teehsunempudemmuS a 0=oN1=seY :
)b+a(D
5.2tnerapot8teehsunempudemmuS b 0=oN2=seY
"0"syawlA ;;;D
4D
3D
2
.teehsenootsteehsunampumuS a 0=oN1=seY :
)b+a(D
1.rehtegotteehsunemtneraphtiwsteehsunemdlihcteseR b 0=oN2=seY
A-3-21-1-24 Menu sheet number control (1)
219QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
.ULPhcuotfonoisnetxeytitnauqelbanE a 0=oN1=seY
:D
21
.tnemtrapedbushcuotfonoisnetxeytitnauqelbanE b 0=oN2=seY
.tnemtrapehcuotfonoisnetxeytitnauqelbanE c 0=oN4=seY
"0"syawlA ;;;;D
11D
01D
9D
8
"0"syawlA ;;;;D
7D
6D
5D
4
"0"syawlA ;;;D
3D
2D
1
noitpircseD eciohC margorPedoc
teehsunemts1forebmunULPtratStnacifingiS
srebmun::::
D21D
11D
01D
9
teehsunemdn2forebmunULPtratStnacifingiS
srebmun::::
D8
D7
D6
D5
teehsunemdr3forebmunULPtratStnacifingiS
srebmun::::
D4
D3
D2
D1
noitpircseD eciohC margorPedoc
teehsunemht4forebmunULPtratStnacifingiS
srebmun::::
D21D
11D
01D
9
teehsunemht5forebmunULPtratStnacifingiS
srebmun::::
D8
D7
D6
D5
teehsunemht6forebmunULPtratStnacifingiS
srebmun::::
D4
D3
D2
D1
noitpircseD eciohC margorPedoc
teehsunemht7forebmunULPtratStnacifingiS
srebmun::::
D21D
11D
01D
9
teehsunemht8forebmunULPtratStnacifingiS
srebmun::::
D8
D7
D6
D5
"0"syawlA ;;;;D
4D
3D
2D
1
A-3-21-1-25 Menu sheet number control (3)
A-3-21-1-26 Menu sheet number control (4)
A-3-21-1-27 Menu sheet number control (5)
A-3-21-1-28 Menu sheet number control (6)
220
File Format
A-3-21-1-29 Time & Attendance
noitpircseD eciohC margorPedoc
:eeyolpmedegalluF)ruoh(emitkrowylkeeW
99~00 ::D
21D
11
)etunim(emitkrowylkeeW 95~00 ::D
01D
9
:eeyolpmeroniM)ruoh(emitkrowylkeeW
99~00 ::D
8D
7
)etunim(emitkrowylkeeW 95~00 ::D
6D
5
.tuo-dekcolctoneraeeyolpmefineveZEEYOLPMEwollA a 0=oN1=seY :
D4ylkeeW-iB/ylkeeWesU b 0=ylkeeW
2=ylkeeW-iB
"0"syawlA :D
3
emitkroWsaemitkaerBezingoceR0=oN1=seY
:D
2
*sruohkrowfognidnuoR,2=setunim51reP,1=setunim01reP,0=dnuortoN
4=setunim03reP,3=setunim02reP
tnacifingiSrebmun
:D
1
* :sruohkrowfonoitcalfgnidnuoR).nim(01=90~50,00=40~00:.nim01reP).nim(51=41~80,00=70~00:.nim51reP
).nim(00=01~00:.nim02reP
A-3-21-1-30 Store/Recall range
noitpircseD eciohC margorPedoc
"0"syawlA :D
21
"0"syawlA :D
11
"0"syawlA :D
01
emitgnitratsllaceR/erotSehtteseR0=oN1=seY
:D
9
*)1000=0000(emitgnitratsllaceR/erotS ::::D
8D
7D
6D
5
*)9999=0000(emitgnidnellaceR/erotS ::::D
4D
3D
2D
1
.eulavnommocevahslanimretllatahteruseB*.eulavemitgnidneehtnahtrellamsebdluohseulavemitgnitratsehT*
dezingocersieulavemitgnidneeht,eulavemitgnidneehtnahtreggibsieulavemitgnitratsehtfI*.eulavemitgnitratsehtsaemasebot
221QT-2000 Reference Manual
A-3-22. Special character file
A-3-22-1 Special character
File name: Special character File No.: 023 Max. allocatable records:28 (fixed)
Character
0 16
Rec. No.
001
002
003
004005006007008009010011012013014015016017018019020021022023024025026027028029030031032033034035036037038039040041042043
Contents DescriptorAmount symbol (2), @(2), No (2), split pricing (1),Training filler (1)No. of item sold (2), Customer count (2)Multiplication (6)Recalling for a check (6)Taxable symbol 1 (3 e.a.)Taxable symbol 2 (3 e.a.)Taxable symbol 3 (3 e.a.)Foreign currency (2)/Selective item symbol (3)Mode symbol 1 (4) (4 e.a.)Mode symbol 2 (4) (4 e.a.)Mode symbol 3 (4) (4 e.a.)Decimal: amount/q'ty, Delimiter (1 e.a.)A.M., P.M. (3 e.a.)Slip continued (12), page (2)Online password (8)Display subtotal symbol (ST key) (16)Subtotal symbol (16)Total symbol (16)Change symbol (16)Check cashing fee (16)Check cashing amount (16)Bon message (16)Not usedCheck No. (12)Service total (16)Item discount total (16)Not usedSeat No. (16)Total symbol (X/Z report) (16)Clock-in symbol (16)Clock-out symbol (16)Break-in symbol (16)Break-out symbol (16)Job code symbol (16)Work time symbol (16)Break time symbol (16)Tip declaration symbol (16)Regular work hours (Employee report) (16)Overtime work hours (Employee report) (16)Employee report (1) (4 e.a.)Employee report (2) (4 e.a.)Hourly labor pay (16)Hourly labor proceeds (16)Pay per transaction (16)
• @No / * $ @No / * NoCTX X BUSY BUSY T1 T2 T3 T4 T5T12T13T14 T23 T1 * * * * • REG RFR-MGRPn†X/ZPGM TRG.., AM PMCONTINUED P STSTTLCG-CACG ** STUB **
CHECK No.SRVC TLDISCOUNT
SEAT#TLCLOCK-INCLOCK-OUTBREAK-INBREAK-OUTJOBWORK TIMEBREAK TIMECASH TIPREGULAR TIMEOVER TIMEIN OUT BRK JOB#TIP WORKCOSTNET SALES/HOURCOST/TRANSACTION
OthersU.S.
OthersU.S.
222
File Format
A-3-23. Report header file
A-3-23-1 Report header
File name: Report header File No.: 024 Max. allocatable records:17 (fixed)
Character
0 16.oN.ceR stnetnoC rotpircseD
100 troperrezilatotdexiF LTTDEXIF200 troperyeknoitcasnarT NOITCNUFEERF300 tropertnemtrapedbuS TPEDBUS400 troperULP ULP500 tropertnemtrapeD TPED600 troperpuorG PUORG700 troperkrelc/reihsaC KRELC/REIHSAC800 desutoN900 troperselasylruoH YLRUOH010 troperselasylhtnoM YLHTNOM110 troper)laicnaniF(hsalF HSALF210 troperkcehcnepO KHCNEPO310 tropersisylanaelbaT SISYLANAELBAT410 troperkcotsULP KCOTSULP510 troperlasuacdioV NOSAERDIOV610 troperyromemlanruoJ YROMEM-J710 ecnadnettA&emiT EEYOLPME810 robalylruoH ROBALYLRUOH910 metiylruoH TCUDORPYLRUOH
223Q
T-2
00
0 R
efe
ren
ce
Ma
nu
al
A-3-24.
Tax table file
A-3-24-1
Tax table
File nam
e:T
ax tableF
ile No.:
025M
ax. allocatable records:5
Actual
valueR
ate
Max. Tableamount
Rounding0
764
67
Singaporerounding 8
Cal. typeCyclic patternCyclic valueNon cyclic value
1011
1213
A-3-25.
Pulldow
n group file
A-3-25-1
Pulldow
n group
File nam
e:P
ulldown group
File N
o.:026
Max. allocatable records:999
A-3-26.
Set m
enu table file
A-3-26-1
Set m
enu table
File nam
e:S
et menu table
File N
o.:028
Max. allocatable records:999
Record No. 1
Record No. 2
Record No. 3
Record No. 4
Record No. 5
Record No. 6
Record No. 7
Record No. 8
Record No. 9
File No. 1
File No. 2
File No. 3
File No. 4
File No. 5
File No. 6
File No. 7
File No. 8
File No. 9
Record No.10
02
46
810
1214
1618
2022
2426
2830
3234
3638
Record No.11
Record No.12
Record No.13
Record No.14
Record No.15
Record No.16
Record No.17
Record No.18
File No.11
File No.12
File No.13
File No.15
File No.16
File No.17
File No.18
Record No.19
4042
4446
4850
5254
5658
6062
6466
6870
7274
Record No.20
File No.19
File No.20
7678
80
File No.10
File No.14
Character
Record No. 1
Record No. 2
Record No. 3
Record No. 4
Record No. 5
Record No. 6
Record No. 7
Record No. 8
Record No. 9
File No. 1
File No. 2
File No. 3
File No. 4
File No. 5
File No. 6
File No. 7
File No. 8
File No. 9
Record No.10 016
1921
2325
2729
3133
3537
3941
4345
4749
5153
55
Record No.11
Record No.12
Record No.13
Record No.14
Record No.15
Record No.16
Record No.17
Record No.18
File No.11
File No.12
File No.13
File No.14
File No.15
File No.16
File No.17
File No.18
Record No.19
5759
6163
6567
6971
7375
7779
8183
8587
8991
Record No.20
File No.19
File No.20
9395
97
File No.10
Status
99
224
File Format
A-3-27. Batch X/Z file
A-3-27-1 Batch X/Z
File name: Batch X/Z File No.: 029 Max. allocatable records:10
Mod
eX
/Z c
ode
(1)
X/Z
cod
e (2
)X
/Z c
ode
(3)
X/Z
cod
e (4
)X
/Z c
ode
(5)
X/Z
cod
e (6
)X
/Z c
ode
(7)
0 1 2 3 4 5 6 7 8 9
X/Z
cod
e (8
)
A-3-28. Receipt/Slip message file
A-3-28-1 Receipt/Slip message
File name: Receipt/Slip message File No.: 032 Max. allocatable records:47
A-3-29. Check endorsement message file
A-3-29-1 Check endorsement message
File name: Check endorsement message File No.: 033 Max. allocatable records:4
Character
0 40
Character
0 40
.oNceR egasseM4~1 egassemogoltpieceR8~5 egassemlaicremmoctpieceR21~9 egassemmottobtpieceR61~31 egassempotlliB02~71 egassemypoclliB42~12 egassemmottoblliB82~52 egassemogolpilS23~92 egassemetaidemretnipilS63~33 egassemmottobpilS
73 desutoN74~83 egassemmottobtseuG
225QT-2000 Reference Manual
A-3-30. Arrangement file
A-3-30-1 Arrangement group (1) ~ (5)
File name: Arrangement group (1) File No.: 038 Max. allocatable records:9999File name: Arrangement group (2) File No.: 138 Max. allocatable records:9999File name: Arrangement group (3) File No.: 238 Max. allocatable records:9999File name: Arrangement group (4) File No.: 338 Max. allocatable records:9999File name: Arrangement group (5) File No.: 438 Max. allocatable records:9999
Arrange(character)
0 24
A-3-31. Character recall file
A-3-31-1 Character recall
File name: Character recall File No.: 039 Max. allocatable records:9999
A-3-32. Check print file
A-3-32-1 Check print
File name: Check print File No.: 041 Max. allocatable records:9
A-3-33. Graphic logo file
A-3-33-1 Graphic logo
File name: Graphic logo File No.: 047 Max. allocatable records:432 (fixed)
Character
0 40
Con
trol
data
0 3
Bitmap data
0 13
226
File Format
Order character
0 16
A-3-35. Order character file
A-3-35-1 Order character
File name: Order character File No.: 065 Max. allocatable records:99
noitpircseD eciohC margorPedoc
)95:32~00:00(emittratsreludehcStnacifingiS
srebmun::::
D82D
72D
62D
52
)95:32~00:00(emitdnereludehcStnacifingiS
srebmun::::
D42
D32D
22D
12
"0"syawlA ;D
02
:1lortnoclavretnI2=ylhtnoM,1=ylkeeW,0=yliaD
tnacifingiSrebmun
:D
91
:2lortnoclavretnIgninaemoN;yliaD
keewafoyadenifeD;ylkeeW,yadseuT;20,yadnoM;10,yadnuS;00
,yadirF;50,yadsruhT;40,yadsendeW;30yadrutaS;60
13~10,etadenifeD;ylhtnoMhtnomehtfodneehtsnaem99
tnacifingiSsrebmun
::D
81D
71
)95:32~00:00(emitlavretnItnacifingiS
srebmun::::
D61
D51D
41D
31
"0"syawlA ;D
21
.oNelbattnemegnarrAtnacifingiS
srebmun::::
D11
D01
D9
D8
.oNeliftnemegnarrAtnacifingiS
srebmun:::
D7
D6
D5
"0"syawlA ;;;;D
4D
3D
2D
1
Star
t ti
me
End
tim
e
Inte
rval
1
Pro
gram
Inte
rval
2
Arra
nge t
bl N
o.
Arra
nge f
ile N
o.
0 142 4 6 8 10 12
A-3-34. Scheduler file
A-3-34-1 Scheduler
File name: Scheduler File No.: 062 Max. allocatable records:99
227QT-2000 Reference Manual
noitpircseD eciohC margorPedoc
)sretcarahc21nihtiw(sretcarahcDIlacigoLtnacifingiS
sretcarahc: ~:D
42D
31
:lanimreT10=srehtO,20=flesenO
tnacifingiSsrebmun
::D
21D
11
:)eulavmargorp(retsampukcab/retsamgnikcartkcehC00=etilletaS,20=retsampukcaB,10=retsaM
tnacifingiSsrebmun
::D
01D
9
:)eulavtnerruc(retsampukcab/retsamgnikcartkcehC00=etilletaS,20=retsampukcaB,10=retsaM
tnacifingiSsrebmun
::D
8D
7
:)eulavmargorp(retsamtnirpPK00=etilletaS,20=retsampukcaB,10=retsaM
tnacifingiSsrebmun
::D
6D
5
:)eulavtnerruc(retsamtnirpPK00=etilletaS,10=retsaM
tnacifingiSsrebmun
::D
4D
3
"0"syawlA ;;D
2D
1
A-3-36. System files
A-3-36-1 Key table
File name: Key table File No.: 074 Max. allocatable records:192 (fixed)1s
t Fun
c co
de
2nd
Func
cod
e
PGM
2 Cha
r cod
e 1
PGM
2 Cha
r cod
e 2
1st R
ec N
o.
2nd
Rec
No.
3rd
Func
cod
e
4th
Func
cod
e
3rd
Rec
No.
4th
Rec
No.
5th
Func
cod
e
6th
Func
cod
e
5th
Rec
No.
6th
Rec
No.
7th
Func
cod
e
8th
Func
cod
e
7th
Rec
No.
8th
Rec
No.
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
Logical ID
Dist
inct
M/B
M
CH
K P
GM
Ord
er P
GM
Ord
er S
tatu
sEC
R G
roup
CH
K P
GM
Sta
tus
0 12 14 16 18
A-3-36-2 System connection table
File name: System connection table File No.: 901 Max. allocatable records:33
228
File Format
Term
inal
No.
Tim
e
Dat
e
Ope
ratio
n
Erro
r fu
nctio
n
Erro
r co
de
0 2 4 6 97 11
A-3-36-5 System error log
File name: System error log File No.: 999 Max. allocatable records:999
Program
0 5
Master ECR ID Backup master ECR ID
Dist
inct
M/B
M
0 1 13 25
A-3-36-3 I/O parameter table
File name: I/O parameter table File No.: 902 Max. allocatable records:10
A-3-36-4 Printer definition table
File name: Printer definition table File No.: 903 Max. allocatable records:24
229QT-2000 Reference Manual
A-4.Counter and Totalizer calculation method............................................. 230A-4-1 Fixed totalizer file ............................................................................................ 230
230
Calculation method
A-4. Counter and Totalizer calculation method
The following calculation methods of totalizer memories are explained in this chapter.
1) Calculations to totalizer memories belonging to the fixed totalizer file
All formulas in these explanations are calculated in the registration mode.In the RF mode, the values in totalizers are calculated using the opposite sign.In the REG– mode, the value in totalizers and counters are calculated using the oppositesign.
A-4-1 Fixed totalizer file
retnuoCrolatoT ybstnemerceDrostnemercnI
ytitnauqselasssorG
)hsahnon(sULP+stnemtrapedbuS+stnemtrapeDrofderetsigerstcudorpforebmuN
sULPdnatnemtrapedbuS,tnemtrapeDroF{
smetielgniS 1+:
noitacilpitluM ytitnauqtupnI:
ecirptilpS ytitnauqtupnI:
erauqS ytitnauqtupnI: × ytitnauqtupnI
ebuC ytitnauqtupnI: × ytitnauqtupnI × }ytitnauqtupnI
lecnaC–diovmetisuoiverP–metinruteR–diovmetitsaL–
tnuomaselasssorG
)hsahnon(sULP+stnemtrapedbuS+stnemtrapeDrofderetsigerstcudorpforebmuN
sULPdnatnemtrapedbuS,tnemtrapeDroF{
smetielgniS secirptupniyllaunamroteserP:
noitacilpitluM secirptupniyllaunamroteserP: × ytitnauqtupnI
ecirptilpS )ytitnauqtinutupnI/secirptupniyllaunamroteserP(:
× ytitnauqtupnI
erauqS secirptupniyllaunamroteserP: × ytitnauqtupnI
× ytitnauqtupnI
ebuC secirptupniyllaunamroteserP: × ytitnauqtupnI
× ytitnauqtupnI × }ytitnauqtupnI
lecnaC–diovmetisuoiverP–metinruteR–diovmetitsaL–
:noitaluclacten/ssorgnI
noitaluclacssorgnehW)1deificepssi
erasnoitcasnartnopuoC,)+%(muimerP,)–%(tnuocsiD,sulP,suniMnistnuomatsujdA.detcelferton
sinoitaluclactennehW)2deificeps
snoitcasnartnopuoC)+%(muimerP,)–%(tnuocsiD,sulP,suniMnistnuomatnemtsujdA.detcelferera
ytitnauqselasteN ).detceffasi1–edom–GERroF.elasrofdesilanifsinoitcasnartanehW(1+
tnuomaselasteN
stnuomanoitartsigertcudorpULP+tnemtrapedbuS+tnemtrapeD{
evobaehtrofstnuomadiovmetitsaL–
evobaehtrofstnuomanrutermetI–
evobaehtrofstnuomadiovmetisuoiverP–
}evobaehtrofstnuomalecnaC–
)yek+(sulP{+
)yek+%(muimerP+
stnuomanoitcerrocrorrE–
}stnuomalecnaC–
)yek–(suniM{–
)yek–%(tnuocsiD+
nopuoC+
stnuomanoitcerrocrorrE–
}stnuomalecnaC–
xatlaunaM{+
stnuomanoitcerrocrorrE–
}stnuomalecnaC–
)xatno-dda(snoitaluclacelbatxatfostluseR+
(delete)
231QT-2000 Reference Manual
retnuoCrolatoT ybstnemerceDrostnemercnI
rewardnimuideM)tiderc,kcehc,egrahc,hsaC(
muidemdeificepsyblatotderednetrolatotselaS)ylnorewardnihsaC(latottnuoccanodevieceR+
)ylnorewardnihsaC(tuodiaP–)muidemdetcelesyb(slatotnaoL+
)muidemdetcelesyb(slatotpukciP–muidemcificepsehthtiwdetarenegstnuomaegnahC–
)rewardnihsacsadeificepsnehW(noitcasnartgnihsackcehcfolatoT–
muidemtrohsderalceDtnuoma
rewardnimuidemderalceDrewardnimuideM–
)evitagensemocebalumrofsihtfotluserehtnehwevitceffeylnO(
muidemrevoderalceDtnuoma
rewardnimuideMrewardnimuidemderalceD–
)evitagensemocebalumrofsihtfotluserehtnehwevitceffeylnO(
smetiedomFRforebmuN1+
ehtnidezilaniferanoitcasnartselaskcehcdna,selastiderc,selasegrahc,selashsacnehW().edom–GER/FR
tnuomaedomFR .snoitartsigeredom–GER/FRroftnuomaselaslatotfoeulavetulosbA
tnuocremotsuC srevocforebmunderetnE
remotsucrepselasegarevA tnuocremotsuC/tnuomaselasteN
eefecivresgnihsackcehCtnuomakcehC+ × ro)oitarecivreS–1(
tnuomaeefecivreS+
eefecnalabweNtnuomaTS/DM+ × ro)oitaregrahcecivreS–1(
tnuomaeefegrahcecivreS+
latotnoissimmockrelC )elbanoissimmoc(selasmetI × etarnoissimmockrelC
rewardniycnerrucngieroF .ycnerrucngierofnitnuomalatotbusehtgnitaluclacretfatnuomaderetnE
tnuomAtnuocsiD yeksuniMfotnuomaderetsigeR+
tnuomanrutermetI yekFRybtnuomametideretsigeR+
tnuocraelC)edom–GER,FR,GER(1+).desserpsiyekraelCnehW(
gnidnuoRsgnidnuorybtnuomanoitcarF+
naivanidnacS,kramneD,2/1FIedulcnisgnidnuoR(
).eropagniSdna
tnuomaelbaxaT
elasfonoitazilaniftatnuomaelbaxatfolatotbuS
)xatno-ddafoesacni(
tnuomaelbaxatfolatotbuS × elasfonoitazilanifta)etarTAV+1(/etarTAV
)xatni-ddafoesacni(
tnuomaxaT selasfonoitazilaniftatnuomaelbaxatrofelbatxatgnisunoitaluclacfotluseR
1TG slatotselastenfolatotdnarG
2TG
foeulavetulosbA)ULP,tnemtrapedbuS,tnemtrapeD(tnuomanoitartsigeR{
tnuomadiovmetitsaL+tnuomadiovmetisuoiverP+
}tnuomadnufeR+nopuoC,tnuocsiD,muimerP,suniM,sulP{+
}tnuomadiovmetitsaL+
3TGlatotselasteN
xatno-dda–xatni-dda–
(future)
(future)
(future)
233QT-2000 Reference Manual
A-5. Error messages ....................................................................................... 234A-5-1 Error messages............................................................................................... 234A-5-2 Operation prompt ............................................................................................ 238A-5-3 System error code........................................................................................... 239
234
Error messages
A-5. Error messages
A-5-1 Error messages
When an error occurs on a QT-2000 terminal, a buzzer sounds and the appropriate errormessage appears on the main display, indicating what action to take.The following table lists the error messages and describes the action to take.
egassemtpmorP gninaeM
ekatsimrotarepO rorrenoitarepO
edoMgnorW100E )rorreedomnepO(gnikcartkcehC
rotarepognorW300E gnikcartKHCnikrelcrorrE/krelcrorrE
yromemtneiciffusnI500E revonoitacollayromeM
rewardehtesolC110E yroslupmocrewarD
llorlanruojegnahC210E dneraenrepaplanruoJ
llortpieceregnahC310E dneraenrepapredro/tpieceR
edomGERotkcabegnahC610E edomFRninoitarepolarulptibihorP
rebmunLBT/kcehCretnE710E yroslupmoc#kcehC
.oNelbaTretnE810E yroslupmoc#elbaT
srevocforebmuNretnE910E yroslupmocrevoC
rebmuntaeSretnE020E yroslupmocrebmuntaeS
trohsgninnurkcotS320EdemmargorpstiwolebspordmetiynanehwmralA
.noitartsigergnirudytitnauqkcotsmuminim
elbaliavasikcotsoN420EnoitartsigerarofeulavkcotslautcanehwrorrE
.eulavevitagenasismeti
.RREyroslupmocnwodyatS620E.)s(metIretnE
yroslupmocnwodyatS
.llufreffublecnaC720EnoitcasnartehtezilanifesaelP
llufreffubdiovllA
elbissopsinoitartsigeroN920Erednetehtnierauoyelihw
.noitarepo
rednetlaitraptslihwnoitartsigerdetpmettA.enodgniebsinoitarepo
noitazilaniFerofebyekTSsserP130E yroslupmocTS
tnuomaderednetretnE330E yroslupmocrednettnuomA
.timilehtsdeecxetnuomaegnahC530E .timilehtsdeecxetnuomaegnahC
.rewardehtmorfyenomevomeR630EdemmargorpehtdeecxerewardehtfostnetnoC
.noitcnuflenitneS—timilrevOnoitatimiLtnuomArotigiD730E rorreO.L.A.H,.L.D.H
noitaralceDyenoMmrofreP830E yroslupmocnoitaralcedyenoM
tpieceRtseuGeussI040E yroslupmoctpiecertseuG
noitadilaVtnirP140E yroslupmocnoitadilaV
yrterdnarepaPDLVtresnI240E .detresnisirepaponnehwmralA
DLVkcehcrorepapdeDLVevomeR340Erosnes
egatsnoitadilavehtnitfelsirepapehtnehwmralA.retnirpehtfo
euqehCtnirP440E yroslupmocTRP-KHC
tnemesrodnE-kcehCtnirP540E yroslupmocDNE-KHC
esaelP.lluFreffuBGER640E.BNroezilaniF
llufreffubnoitartsigeR
llibtnirP740E yroslupmocpilS
.yrterdnarepaPpilStresnI840E .pilSehtnidetresnisirepaponnehwmralA
llufyromemKCEHC940E dneraen/llufxednignikcartKHC
.lluFyromemliateD050E dneraen/llufyromemgnikcartKHC
.deipuccosi.oNLBT/KHC150EotyekkcehCweNehtesuotedamsitpmettA
ydaerlasitahtrebmunagnisukcehcwenanepo.yromemgnikcartkcehcgnitsixenarofdesu
.ysubsi.oNLBT/KHC250EehttsllihwrebmunkcehcemasehtesuottpmettA
rehtoehtnidesugniebsirebmundeificeps.lanimret
235QT-2000 Reference Manual
egassemtpmorP gninaeM
.denepotonsi.oNLBT/KHC350E dnuofton#KHC
egnaR.oNLBT/KHCfotuO450E revoegnar#KHC
.llufegnarerotS650E .egnarnideipccoera#kcehcllA
.liatednistsixemetioN750E .liatednidnuofebtonnactaepeRdnuoR
.metiyrtnetsopretnE850E .liatednistsixemetiyrtnEtsoP
.yektuo-ekaTroni-taEsserP950E .yektuo-ekaTroni-taEsserP
**********.enilfforetnirP060E
".enilfforetnirP **** roDIlacigolRCEsnaem".4PK~1PK
**********rorreretnirP160E
".denwodretnirP **** roDIlacigolRCEsnaem".4PK~1PK
**********rorreretnirP160E
tnirpotyrteR:SEYneercsehtnowohS:ON
ataddracsiD:CSE
**********dnerepapretnirP260E
"dne/dne-raenrepaP **** DIlacigolRCEsnaem".4PK~1PKro
**********dnerepapretnirP260E
tnirpotyrteR:SEYneercsehtnowohS:ON
ataddracsiD:CSE
llufreffubretnirP460EtnirpotyrteR:SEY
neercsehtnowohS:ONataddracsiD:CSE
edisrednestallufreffubtnirP
tonsiPK.nwodretsaMPK760E.pukcabehtrofelbaliava
tnirpotyrteR:SEYneercsehtnowohS:ON
ataddracsiD:CSE
.delbasidsignitnirpPK
**********morfdevomersiretsaMPK860E
.metsys
.metsysehtmorfdevomersiretsamPK" **** .DIlacigolRCEsnaem"
**********.nwodretsaMretnirPnehctiK960E
?metsysmorftievomeRroyrteR.noitcennocrofyrteR:SEY.metsysmorftievomeR:ON
nwodretsamlortnocPK" **** .DIlacigolRCEsnaem"
**********.noitcafotuolanimreT070E
.tnirptonnaC
retnirpsahhcihwRCEtegrattanwoD" **** .DIlacigolRCEsnaem"
**********retnirplanimrettegraT170E
.llufFBtnirpotyrteR:SEY
neercsehtnowohS:ONataddracsiD:CSE
retnirpsahhcihwRCEtegrattallufreffubretnirP" **** .DIlacigolRCEsnaem"
**********lanimretretnirptegraT270E
?yrteR.ysubsi
retnirpsahhcihwRCEtegrattaysuB" **** .DIlacigolRCEsnaem"
**********ebtonyamredro/tpiecerruoY370E
.deussi
retnirpsahhcihwRCEtatuoemiT" **** .DIlacigolRCEsnaem"
236
Error messages
egassemtpmorP gninaeM
**********ebtonyamredro/tpiecerruoY370E
.deussitnirpotyrteR:SEY
neercsehtnowohS:ONataddracsiD:CSE
retnirpsahhcihwRCEtatuoemiT" **** .DIlacigolRCEsnaem"
.ecnalaBevitageN570E.dezilanifebtonnaC
nahtsselsiecnalabnehwnoitazilanifdetpmettA.orez
lluFyromeMlanruoJ080E.elifomem-JraelcesaelP
llufomem-J
omem-JnidnuoftonataD180E .yromemlanruojnidnuofebtonnacataD
*****ataDlagellI*****280E atadomem-JlagellI
.elifomem-JetaerctonnaC380E.yromemhsalFkcehC
.detaercebtonnacelifomem-J
-adilosnoCnitsixeataD580E.aeranoit
.aeranoitadilosnocnistsixeataD
**********retsaMgnikcarTLBT/kcehC501E
tievomeRroyrteR.nwod?metsysmorf
.noitcennocrofyrteR:SEY
.metsysmorftievomeR:ON
nwodretsamKHC" **** .DIlacigolRCEsnaem"
**********pukcaBgnikcarTLBT/kcehC601E
tievomeRroyrteR.nwodretsam?metsysmorf
.noitcennocrofyrteR:SEY
.metsysmorftievomeR:ON
nwodMBKHC" **** .DIlacigolRCEsnaem"
**********retsampukcaB&retsaMhtoB701E
rognikcartLBT/KHC.nwodtonsitpurretnikrelC
.elbaliava
nwodMB/MKHC" **** .DIlacigolRCEsnaem"
**********devomersiretsaMLBT/KHC801E
.metsysmorf
metsysmorfffotiekatnehtnwodretsaM" **** .DIlacigolRCEsnaem"
**********siretsampukcaBLBT/KHC901E
.metsysmorfdevomer
metsysmorfffotiekatnehtnwodretsampukcaB" **** .DIlacigolRCEsnaem"
neewtebhctamsimatadKHC011E.retsampukcaB&retsaM
.derruccosahhctamsimataD
naoLropukciPfoelddiM031E.yeKlecnaCsserP
pugnikcipgniruD
>ypoClliB<foelddiM131EyeklecnaCsserP
ypoclliBgniruD
-taralceDyenoMfoelddiM231EyeklecnaCsserP.noi
noitaralcedyenoMgniruD
>egnahCaideM<foelddiM331EyeklecnaCsserP
GHCaideMgniruD
refsnarTkrelCfoelddiM431EyeklecnaCsserP
snarTKLCgniruD
>kcehCetarapeS<foelddiM631EyekCSEsserP
KHCPESgniruD
237QT-2000 Reference Manual
egassemtpmorP gninaeM
.detadilosnocerasmetI831EdnaedomyalpsidegnahC.noitarepoDIOVmrofrep
gniretnefoesuacebdetibihorpsinoitarepodioV.ytitnauq
evitagenebotdewollatoN931E.yeknopuoC/suniMyb
rorreecnalabtiderC
.unemgnorW041E .MGPybdetibihorpsiredlohteehssihT
.rorrexatnystnemegnarrA541E rorrexatnystnemegnarrA
.yrtneeulavtcerrocnI051E MGProfyrtnetcerrocnI
.desserPyektcerrocnI151E .tcerrocnisignikniL
rebmundroceRroeliFMGP251E.tsixEtonseod
drocerhcuson,elifhcusoN
llufyromemhsalF061E llufyromemhsalF
yromeMhsalFniatadpukcaboN161E .yromemhsalFnidepukcabsiatadoN
dnuoFtonsi.oNeeyolopmE461E.eliFeeyolpmEehtni
.eliFeeyolpmEehtnitestonsi.oNeeyolpmE
ni-gnikcolCtonsi.oNeeyolpmE561E .teynoitarepoNI-KCOLCenodtonsaheeyolpmE
deipuccOsi.oNeeyolpmE661EnoitarepoNI-KCOLCenodsahohweeyolpmE
.niagaNI-KCOLCetarepootstpmetta
edocBOJtcerrocnI761EhtiwNI-KCOLCetarepootstpmettaeeyolpmE
.edocBOJtcerrocnifotuosinoitarepOruoY861E
.eludehcS.reganaMllaCesaelP
ecnawollatonniTUO-KCOLCetareposeeyolpmE.emit
.dedeecxEsruoHkroW961E.reganaMllaCesaelP
.krowemitrevO
ehtnisdnimeRtfihSoN071E.eludehcS
.ni-kcolCtonnnacuoY.tfeltfihsytpmeonsierehT
.yrteRdnatuo-kaerBesaelP171EtslihwTUO-KCOLCetarepootstpmettaeeyolpmE
.emitkaerbanisiehs/eh.dedeecxEsruoHkaerB271E .dedeecxeerasruohkaerB
.wonkrowtasieeyolpmesihT371E .kaerbtuohtiwkrowtasieeyolpmE
kaerbagnikatsieeyolpmesihT471E.won
TUO-KAERBenodtonsahohweeyolpmE.NI-KAERBetarepootstpmettanoitarepo
**********silanimretecnadnettA&emiT571E
.nwod
&emiTroflanimretrezilatotretsamehT.nisngiseeyolpmenanehwnwodsiecnadnettA
" **** .DIlacigolRCEsnaem"
.ni-kcolCtonnacuoY671E.tropeReeyolpmEteseresaelP
gnittesertonfoesuacebni-kcolcotelbissopmI.tropeReeyolpmE
ataDecnadnettA&emiT771E.rorrEnoitacinummoC
.reganaMllaCesaelP.rorrenoitacinummocataDecnadnettA&emiT
.llufyromem)1(ELIFCDI081E.atadCDIraelcesaelP
.smetifollufsiyromem)1(ELIFCDI
.llufyromem)2(ELIFCDI181E.atadCDIraelcesaelP
.smetifollufsiyromem)2(ELIFCDI
.llufyromem)3(ELIFCDI281E.atadCDIraelcesaelP
.smetifollufsiyromem)3(ELIFCDI
238
Error messages
Prompt message Meaning
Data cannot be printed out.
Do you want to display?
Do you want to clear data?
Cancel OK?
Please wait.
Item Consolidation Mode.
Non Consolidation Mode.
REG Mode
REFUND Mode
REG– Mode
REG2 Mode
Training
Please Sign on.
Enter Check/Table Number.
Enter Table Number.
Enter Number of covers.
Enter Seat Number
Perform Slip Printing
Issue Guest Receipt.
Perform Validation Printing.
Perform Check Printing.
Perform Check Endorsement.
Operation Code?
The terminal losts system con-
figuration. Execute reconfigu-
ration procedure as soon as
possible. OK ?
This procedure stops system
maximum 60 sec.
OK ?
Request to check the data which cannot be printedout.Confirmation to reset displayed report.Confirmation of all void operation.Please wait. ECR now processing.In the item consolidation mode.Not in the item consolidation mode.Mode change : REG modeMode change : RF modeMode change : REG– modeMode change : REG 2 modeTraining operatorSign offCHK# compulsoryTBL# compulsoryCovers compulsorySeat# compulsorySlip compulsoryGUEST RCT compulsoryVLD compulsoryCHK-PRT compulsoryCHK-END compulsorySecret No entry for REG 2 mode.
Requirement for system re-configuration.
Alert before flash memory clear.
A-5-2 Operation prompt
All prompt messages, together with descriptors and symbol characters for printing onreceipts, slips or reports are contained in the list below. These messages cannot be added,modified or deleted.
239QT-2000 Reference Manual
A-5-3 System error code
All error codes are contained in the list below. These error codes are displayed or printedon error log report.
edocrorrE gninaeM
0100 )erawtfos(rorresseccareldnaH1100 )noitarugifnocmetsys(reldnahetucexetonnaC2100 CPybkaerB3100 RCEybkaerB4100 tekcapdnammocgniviecererofebffoRSD5100 tekcapdnammocforebmundnammoclagellievieceR6100 retcarahclagellievieceR7100 )erawdrah(rorredneS8100 )erawdrah(rorreevieceR9100 tekcapatadlagellievieceR0200 rorreesnopseroN1200 DItegtonnacroezilaitinitonnaC2200 tekcaplagellidevieceR3200 rorreeviecerTENC4200 rednesybnoitanimretlagellI5200 stekcaprehtogniviecergnirudtekcaplagellidevieceR6200 deviecerstekcapatadhguonetoN7200 rorreesarehsalF8200 rorreetirwhsalF0400 noitamrofni"H"oN1400 noitamrofni"I"oN2400 noitamrofni"F"oN4400 emaneliflagellI5400 stsixeelifoN6400 kcolblagellI7400 tekcapdnammoclagellI8400 )DMCtoN(.oNdnammoclagellI9400 )ATADtoN(.oNdnammoclagellI0500 rorreecneuqeS1500 langisRSDffonruT2500 noitallecnacdevieceR3500 dnammocgnitiawelihwrevoyrteR4500 TOEgnitiawelihwrevoyrteR5500 atadgnitiawelihwrevoyrteR6500 TOEdevieceR7500 KCAgnitiawelihwrevoyrteR8500 atadgnidneselihwrevoyrteR9500 "C"gnitiawelihwrevoyrteR0600 esnopsergnidneselihwrevoyrteR1600 gnidulcxeelihwrevoyrteR4600 dnekaerB5600 redaehtropergnitnirpgnirudrorrE6600 atadtropergnitnirpgnirudrorrE7600 aerakrowniatadtropergnitnirpgnirudrorrE8600 aeranoitadilosnocniatadtropergnitnirpgnirudrorrE9600 rorreraelcelifkroW0700 rorreraelcelifnoitadiolosnoC1700 rorrekcolZ2700 rorreraelcZ3700 rorreesaelerkcolZ
240
Error messages
edocrorrE gninaeM
4700 aeranoitadilosnocotgnitalumuccagnirudrorrE5700 .krowotyromemlanimretmorfatadtropergniypocgnirudrorrE6700 yromemlanimretotatadkcotsgniypocgnirudrorrE7700 lanimretetilletasnororrekcolZ8700 lanimretetilletasnororreraelcZ9700 lanimretetilletasnororreesaelerkcolZ8210 metsysgnitarepootrorreretemaraP9210 ecapspaehfotuO0310 evirdrorrE2310 rorreezistekcapPTenil-nI3310 revoyrterenil-nI0410 rorreretemarapnoitaluclaC1410 egnareliffotuO4410 wolfrevonoitaluclaC5410 rorrenepoenil-nI6410 rorreesolcenil-nI7410 rorrednibenil-nI9410 deviecertonlangisNYS0510 enil-nidetcennoctoN1510 enil-nidetcennocsidtoN2510 BCNlagelliesU3510 revoyrterenil-nI5510 rorreecneuqesenil-nI6510 stsixetroponenil-nI8510 esunitroptegratenil-nI1610 ysubsiecruosermetsyS2610 GNerohpamesgnilloP0710 emanertonnaC1710 pukcip/hcraeselihwdnuofsiedocoN3710 )denepoydaerla(rorreeteledeliF4710 stsixeelifoN5710 noitamrofnielbatacoleroN6710 noitaercelifgnirudyromemhguonetoN7710 elifagnitirw/gnidaerelihwrorrerebmundroceR9710 rorreetaercelbuoD2810 rorreetirwhsalF4810 rorreraelchsalF0910 xobliamtcejboehttsixeoN1910 devirraegassemoN2910 diegassemdnesrorrE3910 revohtgnelegassemdneS4910 tolstsniagaegassemgnolooT5910 xobliamrofelifeerfoN6910 .smarapmetsysdetcejboehtdnuoftoN7910 ytpmeeueuQ8910 tuoemiT2020 BCFeerfoN3020 llufASDmetsyS4020 esunisiBCN5020 BCSrofelifeerfoN6020 nekorbretniopkniL7020 ledomBCPkaerB8020 knilBCPkaerB
241QT-2000 Reference Manual
edocrorrE gninaeM
9020 aeraBCPmorfegnarfotuO0120 aeraBCRmorfegnarfotuO1120 aeraeueuqmorfegnarfotuO2120 aeraeueuqmorfegnarfotuO3120 aeraBCSmorfegnarfotuO4120 redaeheueuqehtdnuoftoN5120 ytiroirpehtdnuoftoN6120 rorremuskcehC7120 rorresutatsssecorP5320 rorrelocotorpenil-nI7420 nekotenil-nipotS
243QT-2000 Reference Manual
A-6. Memory map ........................................................................................... 244A-6-1 Memory map ................................................................................................... 244A-6-2 Memory behavior ............................................................................................ 245
244
Memory map
A-6. Memory map
This chapter shows the memory map of the QT-2000 terminal and their behaviors byinitialization operations.
A-6-1 Memory map
EP-ROM RAM Flash memory
This memory is used forstarting procedure for IPLand to set up the network.
Contents1. Operating system2. Application for terminal3. Prompt message4. Standard program
128k
256k
512k
1.38
M38
4k
Standard memoryC drive
Standard memoryD drive
Optional memory (2)D drive
This memory is divided into two equal parts and totallydedicated for the electronlcjournal and cannot be usedfor any other purpose.
This memory is like built-inRAM card and it can be usedfor the folowing:1. Storage for X/Z data or2. All program data with memory allocation data or3. All program data file by file.
Memory area (A)
Memory area (B)
Memory area (D)
Memory area (E)
Memory area (C)
256k
This memory is divided into two equal parts and totallydedicated for the electronlcjournal and cannot be usedfor any other purpose.--------------------------------------
128k
128k
245QT-2000 Reference Manual
A-6-2 Memory behavior
Memory behavior under the following operations
Note: These operations are followed by the initialization operation (top left button).
1. 44449999<ST>Clears Memory area (B) and (C), and ready to load the IPL and user program fromanother terminal or standard program.
2. 10xxx/20xxx<ST>Clears Memory area (B) and ready to load the user program from another terminal orstandard program.
3. NN10xxx/NN20xxx<ST>Set the selected machine ID “NN” and clears Memory area (B) and ready to load the userprogram from another terminal or standard program.
4. 88810xxx/88820xxx<ST>Clears Memory area (B), (D) and (E) and ready to load the user program from anotherterminal or standard program.
xxx: This part depends upon options. (Refer to page 98)
247QT-2000 Reference Manual
Index .................................................................................................................. 248
248
Index
IndexA
Add check key 52Application systems 25Arrangement file 225Arrangement key 48Arrangement key function 66Arrangement program example 70Auto-program menu hierarchy 128Auto-programming function 127
B
Backup/restore the program data 113Batch X/Z file 224Bill copy key 48BREAK-IN Operation 80BREAK-OUT Operation 80Busy reset 104
C
calculation method 230Cancel key 53Cancelling of all data 134Cash drawer 15Changing receipt on/off status 110Character recall file 225Check endorsement key 47Check endorsement message file 224Check print file 225Check print key 44Check tracking system 59CHK# (Clerk interrupt) 106Clear check detail and index file 61Clerk control function 63Clerk detail memory 64Clerk file 181Clerk interrupt 63Clerk number key 50Clerk sign on/off operation 132Clerk training 64Clerk transfer key 44CLOCK-IN Operation 76CLOCK-OUT Operation 79Collection/Consolidation system 118Command receive 129Controlling the flow of arrangement 68Coupon 2 key 47Coupon key 45Cube key 51Currency exchange key 48Customer display 14Customer number key 48
D
Data backup when the master goes down 60Data Communication System 114Department file 176Department key 49Department number key 53Deposit key 46Design concept 4Discount key 46Display control 67Display mode key 53Display on/off key 52Drawer for clerk 106
E
Employee file 73, 198End of the arrangement programs 69Error correct/Void key 47Error log print 108Error message 35
F
File concept 25File list 168Finalize key 43First unit price key 50Fixed totalizer file 173Flag clear 98Flat PLU key 49Floating clerk interrupt system 18Function key 42Function key list 166Function keys 30
G
General configuration 10General control file 203Grace period 73Grand total file 202graphic logo 71Graphic logo file 225Group file 180
H
Hard key code of keyboard 13Hardware configuration 10Hardware diagram 11Hardware interface 115Hourly Item 72Hourly Item Link file 72Hourly sales file 193House Bon key 52
249QT-2000 Reference Manual
I
IDC Data File Structure 88IDC data type 91IDC function file 84In-line collection/consolidation system 20In/on-line connectors 114In/on-line functions 117INIT 98INIT 2 98Inner multiplication 139Input/output connectors 16IPL (Initial Program Loading) 99IPL operation 100
J
Job Code file 73Job code file 199Journal memory display key 53
K
Ketten Bon key 52Key function specification 67Keyboard layout 32Kitchen printer backup processes 56Kitchen printer control 54Kitchen printer control setting 55Kitchen printer cross backup 57Kitchen printer output control 56Kitchen printer print sample 57Kitchen printer system configuration 54
L
Linkage of totalizers 29LIST function 136List key 53List number key 53Loan key 45
M
Machine initialization 96Main display 14Making graphic logo 71Manager function 102Manager mode control 64Manager Operation 80Media Change 142Media change key 52Menu shift key 49Merchandise subtotal key 51Minus key 46Mode control 33Mode setting 67Monthly sales file 193, 194, 195Multiplication key 51
N
New balance key 43New check key 51New/Old check key 51No sale key 48Non add key 47Non add/No sale key 48Normal receipt key 45Number input 66
O
Old check key 51On-line collection/consolidation system 20, 21Open 2 key 50Open check 141Open check key 52Open key 50Operation prompt 34Operator number key 50Operator X/Z key 50Optional peripherals 17Order character file 226Order ID change 107
P
Paid out key 45Pick up key 45PLU file 175PLU key 48Plus key 46Premium key 47Price inquiry key 44Price key 48Printing control system 39Pulldown group file 223Pulldown group function 137
Q
Quantity/For key 51
R
R/J print control 68Read and reset operation 148Recall 61Receipt key 47Receipt On/Off key 50Receipt/Slip message file 224Received on account key 45Refund key 47Refund mode operation 146Remote off 103Remote on 103Remote power control 113Report header file 222Report sample 149Restore from flash memory 99RF or REG– mode 146
250
Index
S
Schedule file 73, 199Scheduled execution of arrangement key function 70Scheduler file 226Seat number key 52Second unit price key 50Security locks 15Selective item subtotal key 51Separate check 140Separate check key 52Set Menu function 137Set menu table file 223Shared check tracking requirement 60Shared check tracking system 18, 59Sign-in control 81Slip back feed/Release key 49Slip Feed/Release key 49Slip print key 49Software concept 4Special character file 221Square key 51Stock inquiry key 44Stock maintenance 105Store 61Store and Recall 61Subdepartment file 174Subdepartment key 53Subdepartment number key 53Substitution key 52, 138Subtotal key 50System command execution 111System concept 4System configuration 18System connection check 102System files 227System key 42System re-configuration 109
T
Table analysis file 202Table number key 49Table transfer 61Table transfer key 44Tax status shift key 49Tax table file 223Taxable amount subtotal key 50Tender key 43Text print key 44Text recall key 44Time and Attendance 73Time Zone file 72, 74Time zone file 197Tip key 45Transaction key 44Transaction key file 174Transferring IDC 92
V
Validation key 47VAT key 48Void table file 201Voiding the last registered item 133Voiding the previous registered item 134
W
Work Time file 74
X
X/Z collection 120X/Z collection/consolidation 112, 124X/Z consolidation 122X/Z reporting 111
top related