ramset product guide 2011 v1
Post on 11-Mar-2016
572 Views
Preview:
DESCRIPTION
TRANSCRIPT
Product Guide
2011/V1
3 - 113
4
8
9
11
12 - 2112
13
14
15
17
18
20
21
21 - 3221
22
24
29
29
33 - 34
35 - 3735
35
36
37
38 - 4138
38
39
39
40
41 - 4441
42
42
43
43 - 44
43 - 44
45 - 4845
46
47
47
48
48
Reid™ Concreters and Builders Accessories
• Cement Sheet
Pipe Support and Fire Protection Systems
• Chipboard
• Plasterboard
• Cabinet
• Sealants
• Packers
• FomoFill™ Expanding Foams
• Concrete Repair and Additives
• Cementitious and Epoxy Grouts
Construction Chemicals
• Adhesives
• Fire Protection of Pipe Penetrations
• Channel Profiles, Supports and Accessories
• Pipe Clamps and Accessories
• AnkaScrew™ Suspension System
• Anchoring Packs (Heavy Duty)
Direct Fixing Tools and Accessories
Power Tools and Accessories
Mechanical Anchoring
Chemical Anchoring
Self Drilling Screws
• ChemSet™ Injection
• ChemSet™ Capsules
• ChemSet™ Studs
• Applicators and Accessories
• Powder Actuated Tools
• Drive Pins and Powerloads
• Gas Technology Tools
• Electrical & Plumbing Contractor Fixing Packs
• 18V Cordless Range
• Chisels
• Screwdrivers and Drilldrivers
• Concrete Nails
• Gas Pins and Fuel Cells
• Heavy Duty Anchors
• DynaDrill™ Range
• Medium Duty Anchors
• Laser Range
• Allthread Rod and Accessories
• Metal
• Electrical Support Fixings
• Driver Bits & Accessories Range
• Carbide
• Diamond
• Light Duty Anchors
Effective from December 31, 2010. 2
1300 780 063www.ramset.com.au
RAMSETTM
POWDER ACTUATED FIXING TOOLS PG 0100
Item Code Description Pack Qty
JOBMASTER 1
TS750P 1
TYMASTER 1
FORMMASTER 1
ROCKET 1
FRAMEBOSS 1
POWDER ACTUATED TOOL ACCESSORIES PG 0160
Item Code Description Pack Qty
JobMasterTM
PA28113 1
PA28235 1
PA28230 1
PA310000 1
FrameMasterTM
(TS750P)
PA27833 1
PA27432 1
PA27831 1
PA27580 1
TyMasterTM
653116 1
PAT1085 1
653021 1
653106 1
653035 1
PA655901 1
PA655902 1
PA655903 1
FormMasterTM
PA28811 1
PA312860 1
PA28816 1
PA310000 1
Rocket
A1010 Piston Kit - Rocket 1
A1130A 1
A1049A 1
Piston Kit High Power - FrameMaster (TS750P)
Fastener Guide Assembly - FrameMaster (TS750P)
Spall Shield - FrameMaster (TS750P)
Spall Shield - FormMaster
Extension Pole - TyMaster
Pole Connector - TyMaster
Pole Round Connector - TyMaster
Piston Kit - FormMaster
Buffer (x5) - FormMaster
Buffer (x5) - JobMaster
Buffer (x3) - TyMaster
Fastener Guide Assembly - TyMaster
Spall Shield - TyMaster
Fastener Guide Assembly - JobMaster
Spall Shield - JobMaster
Piston Kit Standard - FrameMaster (TS750P)
Buffer Assembly (x5) - Rocket
Fastener Guide Assembly - Rocket
Fastener Guide Assembly - FormMaster
DIRECT FIXING TOOLS AND ACCESSORIES
Piston Kit High Power - TyMaster
Piston Kit Standard - TyMaster
JobMasterTM
- General Purpose Tool
FrameMasterTM
- Proven Framing Tool
TyMasterTM
- Dedicated Overhead Tool
FormMasterTM
- High Powered Tool For Formworkers
Rocket - Automatic Short Pin Tool
FrameBossTM
- Fully Automatic Magazine Tool
Piston Kit - JobMaster
Effective from December 31, 2010. 3
1300 780 063www.ramset.com.au
PG 0160
Item Code Description Pack Qty
FrameBossTM
010984 1
010982 1
010983 1
PA37040 1
PA37038 1
PA37023 1
PA11030 1
Accessories
PA1613 Safety Glasses 1
PA9333 1
PBT Pin Breaker Tool 1
PAWS8 1
PA9316 1
PG 0103
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
LDU25 25 8 100
LDU32 32 8 100
LDU38 38 8 100
LDU42 42 8 100
LDU50 50 8 100
LDU57 57 8 100
LDU65 65 8 100
LDU75 75 8 100
LDU90 90 8 100
LDU99 100 8 100
PG 0104
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
C925C 25 9 500
C930C 30 9 500
C940C 40 9 300
C950C 50 9 300
C960C 60 9 300
PG 0103
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
LDU60F 60 5 200
LDU75F 75 5 200
LDU99F 99 5 200
Piston
Piston Return Spring (x2)
Piston Insulation Ring (x2)
Fastener Guide Assembly
Magazine Assembly
Spall Guard
POWDER ACTUATED TOOL ACCESSORIES (Cont.)
FASTENERS & ASSEMBLIES FOR CURRENT RAMSET TOOLS
Insulation Fastener Adaptor Kit
COLLATED DRIVE PINS FOR USE WITH FrameBoss™
DRIVE PINS FOR USE WITH FrameBoss™ (TS60P), FrameMaster™ (TS750P), FormMaster™ & JobMaster™
TIMBER FORMWORK PINS FOR USE WITH FormMaster™ & FrameMaster™ (TS750P)
Lubricating & Releasing Oil
Tool Maintenance Kit
Safety Warning Sign
Effective from December 31, 2010. 4
1300 780 063www.ramset.com.au
PG 0106
Item Code Description Pack Qty
SP12 100
SC925 100
SC930 100
SC940 100
SC950 100
SC960 100
SC970 Pin for fixing to steel 100
SC950W 100
SC960W 100
PG 0106
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
SC925C 25 9 500
SC930C 30 9 500
SC940C 40 9 300
SC950C 50 9 300
SC960C 60 9 300
PG 0106
Item Code Description Pack Qty
SBR9 100
WASHERED PIN ASSEMBLIES PG 0103
Item Code Shank Length (mm) Washer Diameter (mm) Pack Qty
LWU25 25 22 100
LWU32 32 22 100
LWU25K 25 Knurled 16 100
LWU75 75 16 100
PG 0106
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
LAU25 25 8 100
LAU30H 30 8 100
PG 0106
Item CodeInsulation Thickness
(mm)Pack Qty
CI640 40 200
CI650 50 200
CI670 70 - 75 200
CI6100 90 - 100 100
CI960 60 - 65 100
SPECIALIST PINS FOR FIXING TIMBER TO STRUCTURAL STEEL
ANGLE CLIP (CATINERY BRACKET) PIN ASSEMBLIES
Pin for fixing 45mm timber to steel
Washered Pin for fixing 35mm timber to steel
Washered Pin for fixing 45mm timber to steel
INSULATION FASTENERS - (FOR USE WITH InsulFastTM
PA TOOL)
SACRIFICIAL FORMWORK PINS FOR USE WITH FrameBossTM
, FormMaster™ & JobMaster™
SPECIALIST COLLATED PINS FOR FIXING TO STRUCTURAL STEEL & HARD CONCRETE USE WITH FrameBoss™
Pin for fixing track to steel
Pin for fixing to steel
20mm Pin for Steel with 14mm Washer
Pin for fixing to steel
Pin for fixing to steel
Pin for fixing 35mm timber to steel
Effective from December 31, 2010. 5
1300 780 063www.ramset.com.au
INSULATION FASTENERS PG 0106
Item CodeMax. Insulation
Thickness (mm)Pack Qty
CR950P 25 200
PG 0106
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
LHS22 22 14 1000
CANE BIN ASSEMBLIES 25 mm PIN PG 0103
Item Code Description Pack Qty
LC825 25 mm Double Clip 500
PG 0180
Item Code Description Pack Qty
RCA25F Angle (Ramclip) 100
PG 0180
Item Code Disc Diameter Disc Hole Diameter (mm) Pack Qty
RCD16F 16mm (5/8") 5 100
RCD22F 22mm 5 100
ELECTRICAL / PLUMBING FIXING PRODUCTS PG 0184
Item Code Description Pack Qty
LZU30H 100
FASTENERS & ASSEMBLIES FOR PREVIOUS RAMSET TOOLS
DRIVE PINS FOR J20, J10 & J20S PG 0113
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
HDB50 50 6 100
HDB64 64 6 100
HDB75 75 6 100
HDB95 95 6 100
DRIVE PINS FOR USE WITH OTHER MAGAZINE TOOLS PG 0104
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
RHC22 22 8 100
RHC27 27 8 100
RHC52 52 8 100
RHC62 62 8 100
RHC72 72 8 100
POWDER ACTUATED ACCESSORIES - CLIPS
WASHERS (DISCS) FOR USE WITH STANDARD P.A. PINS
HEAVY DUTY DRIVE PIN ASSEMBLY for DekMaster™ (D230)
PA Threaded Rod Hanger - M10
Effective from December 31, 2010. 6
1300 780 063www.ramset.com.au
STRIP POWERLOADS .27 calibre
PG 0107
Item Code Strength Colour Pack Qty
PLSGR22 Weak Green 100
PLSYW22 Medium Yellow 100
PLSRD22 Strong Red 100
SHORT SERIES POWERLOADS .22 calibre
FOR USE WITH JobMaster™ PG 0107
Item Code Strength Colour Pack Qty
PLCGR22S Weak Green 100
PLCYW22S Medium Yellow 100
PLCRD22S Strong Red 100
FOR USE WITH DekMaster™ (D230) PG 0107
Item Code Strength Colour Pack Qty
PLDYW25X Medium Yellow 100
PLDBU25X Strong Blue 100
PLDRD25X Very Strong Red 100
DISC POWERLOADS .25 calibre
PG 0107
Item Code Strength Colour Pack Qty
PLDGR25 Weak Green 100
PLDYW25 Medium Yellow 100
DISC POWERLOADS .25 calibre
FOR USE WITH D200, D90 & D60 PG 0107
Item Code Strength Colour Pack Qty
PLDGR25 Weak Green 100
PLDYW25 Medium Yellow 100
PLDRD25L Strong Red 100
POWERLOADS
.22 calibre FOR USE WITH J20S & J20 PG 0107
Item Code Strength Colour Pack Qty
PLCGR22S Weak Green 100
PLCYW22S Medium Yellow 100
PLCRD22S Strong Red 100
PLCPU22S Very Strong Purple 100
POWERLOADS FOR RAMSET POWDER ACTUATED FIXING TOOLS
FOR USE WITH FrameBoss™, FrameMaster™ (TS750P), FormMaster™, TyMaster, Rocket, Striker, S75A, & TS750. (TS60P)
FOR USE WITH InsulFastTM
Effective from December 31, 2010. 7
1300 780 063www.ramset.com.au
PG 0120
Item Code Description Pack Qty
a TF1100 1
b TrakMaster 1
c CableMaster 1
d InsulFastGT InsulFastTM
GT-Insulation Fixing Tool 1
a b c d
PG 0182
Item Code Description Pack Qty
TrakFastTM
B20542 Battery - TrakFast 1
TFBC 1
TrakMasterTM
TMBP 1
TMBC 1
337700 1
333700 1
010670 1
CableMasterTM
TMBP 1
TMBC 1
336800 1
CSA2025 1
CSA1632 1
PULSALIFT 1
InsulFastTM
GT
TMBP 1
TMBC 1
Common Accessories
PA1613 Safety Glasses 1
TMBCPS 1
900507 1
B20544L 1 PulsaLift Pole Tool
Battery Charger (requires power supply)
Fastener Guide - CableMaster
CableMaster Saddle adapt 20/25mm
CableMaster Saddle adapt 16/32mm
Battery Charger (requires power supply)
Fastener Guide - TrakMaster
Magnetic Washer Adaptor - TrakMaster
40 Pin Magazine - TrakMaster
Battery - TrakMaster / CableMaster
GAS TECHNOLOGY FIXING TOOL ACCESSORIES
Battery - TrakMaster / CableMaster / InsulFast GT
PulsaLift Pole Tool (2.4m - 3.8m Working Height)
Battery Charger (requires power supply)
Battery - TrakMaster / CableMaster / InsulFast GT
Battery Charger Power Supply
TrakFastTM
- Original Track Fixing Tool
GAS TECHNOLOGY TOOLS
TrakMasterTM
- Pulsa Technology for Track & Mesh
In - Car Charger Lead
Gas Tool Degreaser / Lubricant
CableMasterTM
- Pulsa Tech. For Electrical & Plumbing
Battery Charger - TrakFast (requires power supply)
Effective from December 31, 2010. 8
1300 780 063www.ramset.com.au
PG 0124
Item Code Shank Length (mm) Pack Qty
011204 25mm Washers 1000
PG 0123
Item Code Shank Length (mm) Pack Qty
C620 20 500
C625 25 500
C630 30 500
C635 35 500
PG 0123
Item Code Pack Qty
HC615 500
SC620 500
HC617 500
HC622 500
HC632 Premium Hard Concrete & Steel 32mm 500
PG 0125
Item Code Pack Qty
CG620 500
TRAKFAST PINS & FUEL PACKS - STANDARD DUTY PG 0123
Item Code Shank Length (mm) Pack Qty
FPP012 13 1000
FPP034B 19 1000
FPP100 25 1000
FPP114 32 1000
TRAKFAST PINS & FUEL PACKS - HEAVY DUTY PG 0123
Item Code Shank Length (mm) Pack Qty
FPP012S 13 1000
CABLEMASTER PINS & FUEL PACKS - SPECIALIST SOFT WASHERED PINS FOR PVC FITTINGS
Premium Hard Concrete & Steel 17mm
Premium Hard Concrete & Steel 22mm
Description / Shank Length (mm)
Soft Washered Pins - 20mm
ACCESSORIES TO SUIT MAGNETIC WASHER ADAPTOR
TRAKMASTER / CABLEMASTER PINS & FUEL PACKS - STANDARD DUTY
Description / Shank Length (mm)
TRAKMASTER / CABLEMASTER PINS & FUEL PACKS - HEAVY DUTY FOR STEEL AND HARD CONCRETE
Heavy Duty Steel/Concrete - 15mm
Heavy Duty Steel/Concrete - 20mm
Effective from December 31, 2010. 9
1300 780 063www.ramset.com.au
TRAKFAST BREAKAWAY PINS & FUEL PACKS PG 0123
Item Code Description Pack Qty
FPP034T 19 1000
FPP100T 25 1000
FPP112T 38 1000
TRAKFAST FUEL PACKS PG 0124
Item Code Description Pack Qty
TFGAS 6
INSULFAST GT FASTENERS
Item Code Description Pack Qty
IG625 White Suits Insulation - 25mm - 30mm 400
IG625B Black Suits Insulation - 25mm - 30mm 400
IG638 White Suits Insulation - 38mm - 45mm 350
IG650 White Suits Insulation - 50mm - 55mm 300
IG650B Black Suits Insulation - 50mm - 55mm 300
IG675 White Suits Insulation - 75mm - 85mm 250
IG675B Black Suits Insulation - 75mm - 85mm 250
IG6100 White Suits Insulation - 100mm - 110mm (Available Q1 2011) 200
TrakFast Fuel Cell Pack
Effective from December 31, 2010. 10
1300 780 063www.ramset.com.au
CABLEMASTER ELECTRICAL CONTRACTOR PACKS PG 0125
Item Code Description Pack Qty
CPGCL 500
CPGCLHC617 500
CPGCLHC622 500
CPGCH 125
CPGCH140 200
CPGCT 500
CPGCTL 300
CPGSH20 400
CPGSH25 400
CPGDAS20 400
CPGDAS25 400
CPGEC16 500
CPGEC20 500
CPGEC25 500
CPGEC32 250
CPGFP02 500
CPGFP04 500
CPGTRH 400
CPGCWB 400
EClipTM
CableHornTM
ClipElecTM
CTClipTM
CABLEMASTER ELECTRICAL CLIPS PG 0125
Item Code Description Pack Qty
CABLEHORN Double cable bow 35
CLIPELEC Clipelec & Cable tie 100
CTCLIP One piece Clip w/tie 100
ECLIP20 100
ECLIP25 100
CSH20 100
TRH0810 100
CWBKT 100
SPMW 500
Strap and
Plate WasherSaddles Half Saddles (Metal) FP FireFixTM Catenary Wire Bracket Threaded Rod Hanger
Catinary Wire Bracket Assy.
Strap & Plate Mounting Washer
Contractor Pack - Clipelec
Contractor Pack - Clipelec + Hard Conc. Pins 17mm
Contractor Pack - Clipelec + Hard Conc. Pins 22mm
C/master Saddle Half 20mm
Threaded Rod Hanger M8/M10
* Contractor Packs contain electrical clips, pins, fuel cells and cable ties where applicable.
Contractor Pack - Double Cablehorn
Contractor Pack - Single Cablehorn
Contractor Pack - CTCLIP
Contractor Pack - FP FirefixTM
7 to 8mm
Contractor Pack - FP FirefixTM
8 to 9.5mm
Contractor Pack - Threaded Rod Brkt.
Contractor Pack - Catinary Wire Brkt.
C/Pack - Direct Align H/saddle 25mm
Contractor Pack - ECLIP16
Contractor Pack - ECLIP20
Contractor Pack - ECLIP25
Contractor Pack - ECLIP32
Snap-on Conduit clip 20mm
Snap-on Conduit clip 25mm
Contractor Pack - CTCLIP LARGE 40-60mm
Contractor Pack - H/saddle 20mm
Contractor Pack - H/saddle 25mm
C/Pack - Direct Align H/saddle 20mm
Effective from December 31, 2010. 11
1300 780 063www.ramset.com.au
18 VOLT LITHIUM-ION CORDLESS RANGE PG 0201
Item Code Description Pack Qty
a CRH18V 18V Rotary Hammer 1
b CHDD18V 18V Hammer Drill Driver 1
c CDD18V 18V Drill Driver 1
d CID18V 18V Impact Driver 1
e CIW18V 18V Impact Wrench 1
f CRS18V 18V Reciprocating Saw 1
g CCS18V 18V Circular Saw 1
h CT18V 18V Torch 1
i CRADIO 18V Radio 1
j CBAT18V 18V Battery 1
k CC1828V Charger 1
l CKITBAG Bag 1
m CBASEKIT18V 18V Base Kit (2xCBAT18V,1xCC1828V,1XCT18V,1XCKITBAG) 1
a
b c d e
f g h i
j k l m
POWER TOOLS AND ACCESSORIES
Effective from December 31, 2010. 12
1300 780 063www.ramset.com.au
DRIVERS BITS & ACCESSORIES PG 0580
Item Code Driver Type Pack Qty
HDPH02025 #2 PH x 25 mm 10
HDPH02050 #2 PH x 50 mm 10
HDPH02100 #2 PH x 100 mm 10
HDPH02150 #2 PH x 150 mm 10
HDPH02045DE 10
HDPH02065DE #2 PH Db. x 65 mm 10
Item Code Driver Type Pack Qty
HDHX05032 10
HDUN04065 10
HDUN05050 10
HDUN05065 10
HDUN06065 10
Item Code Driver Type Pack Qty
920508 8mm Socket 10
920510 10mm Socket 10
920515 15mm Socket 10
920517 17mm Socket 10
920518 18mm Socket 10
920519 19mm Socket 10
Item Code Driver Type Pack Qty PG 0724
016707 10mm Long Socket 1
016708 13mm Long Socket 1
016709 15mm Long Socket 1
921556 SDS - 1/2" Drive Socket Adaptor 1
Item Code Description Pack Qty PG 0201
CRS18VBMC 18V Reciprocationg Saw Blade - METAL 5
CRS18VBWC 18V Reciprocationg Saw Blade - WOOD 5
CCS18VBWC 18V Circular Saw Blade - WOOD 1
#2 PH Db. Ended x 45 mm
Int. Hex Drive 5 x 32 mm
Hex Drv. Mag 1/4" x 65 mm
Hex Drv. Mag 5/16" x 50 mm
Hex Drv. Mag 5/16" x 65 mm
Hex Drv. Mag 3/8" x 65 mm
Effective from December 31, 2010. 13
1300 780 063www.ramset.com.au
DynaDrill™ HAMMERS & DEMOLITION HAMMERS PG 0200
Item Code Description Pack Qty
a DD526 2Kg Rotary Hammer 1
b DD527 2Kg Combi Hammer 1
c DD532 1
d DD544 1
e DD565 1
f DD576 1
g DD665 1
h DD610 1
i DD528A60C 1
DD528CH DD528 Charger 1
DD528BP30 Battery 3.0Ah 1
a b c
d e f
g h
i
5Kg Combi Hammer
7Kg Combi Hammer
10Kg Demolition Hammer
3Kg Rotary Hammer
4Kg Combi Hammer
24V Cordless Rotary Hammer Kit (Tool + 2x3.0Ah Batteries + Charger)
5Kg Demolition Hammer
Effective from December 31, 2010. 14
1300 780 063www.ramset.com.au
R3™ PLUS CARBIDE DRILL BITS PG 0203
Item Code DiameterWork Length (mm) x
Total length (mm)Pack Qty
DDR306050X3 1/4" 50 x 110 1
DDR306100X3 1/4" 100 x 160 1
DDR306150X3 1/4" 150 x 210 1
DDR312125X7 1/2" 150 x 210 1
DDR305050 5 50 x 110 1
DDR305100 5 100 x 160 1
DDR305065X5 5.5 80 x 140 1
DDR305125X5 5.5 150 x 210 1
DDR306050 6 50 x 110 1
DDR306100 6 100 x 160 1
DDR306150 6 150 x 210 1
DDR307065 7 100 x 160 1
DDR308065 8 100 x 160 1
DDR308150 8 150 x 210 1
DDR310100 10 100 x 160 1
DDR310180 10 200 x 260 1
DDR310400 10 400 x 460 1
DDR312125 12 150 x 210 1
DDR312250 12 250 x 310 1
DDR312400 12 400 x 460 1
DDR313200 13 200 x 260 1
DDR314200 14 200 x 250 1
DDR315150 15 150 x 200 1
DDR316125 16 150 x 200 1
DDR316200 16 200 x 250 1
DDR316400 16 400 x 450 1
U3™ PLUS CARBIDE DRILL BITS PG 0203
Item Code DiameterWork Length (mm) x
Total length (mm)Pack Qty
DDU306050X3 1/4" 50 x 110 1
DDU306100X3 1/4" 100 x 160 1
DDU306150X3 1/4" 150 x 210 1
DDU305050 5 50 x 110 1
DDU305100 5 100 x 160 1
DDU306050 6 50 x 110 1
DDU306100 6 100 x 160 1
DDU306150 6 150 x 210 1
DDU308100 8 100 x 160 1
DDU308150 8 150 x 210 1
DDU310100 10 100 x 160 1
DDU310200 10 200 x 260 1
DDU312150 12 150 x 210 1
DDU312250 12 250 x 310 1
DDU314200 14 200 x 250 1
DDU316200 16 200 x 250 1
Effective from December 31, 2010. 15
1300 780 063www.ramset.com.au
R3™ PLUS CARBIDE QUATRO HEAD DRILL BITS PG 0203
Item Code DiameterWork Length (mm) x
Total length (mm)Pack Qty
DQR316200 16 250 x 300 1
DQR316400 16 400 x 450 1
DQR318200 18 200 x 250 1
DQR318400 18 400 x 460 1
DQR319250 19 250 x 310 1
DQR320200 20 200 x 250 1
DQR320400 20 400 x 450 1
DQR322200 22 200 x 250 1
DQR322400 22 400 x 450 1
DQR324200 24 200 x 250 1
DQR324400 24 400 x 450 1
DQR325400 25 400 x 450 1
DQR326200 26 250 x 300 1
DQR326400 26 400 x 450 1
R3™ MAX DRILL BITS PG 0203
Item Code DiameterWork Length (mm) x
Total length (mm)Pack Qty
DDSM12200 12 200 x 340 1
DDSM12400 12 400 x 540 1
DDSM14200 14 200 x 340 1
DDSM14400 14 400 x 450 1
DYSM16200 16 250 x 390 1
DYSM16400 16 400 x 540 1
DYSM18200 18 250 x 390 1
DYSM18400 18 400 x 540 1
DYSM19195 19 195 x 350 1
DYSM20200 20 200 x 320 1
DYSM20400 20 400 x 520 1
DYSM20800 20 800 x 920 1
DYSM22200 22 200 x 320 1
DYSM22400 22 400 x 520 1
DYSM24200 24 200 x 320 1
DYSM24400 24 400 x 520 1
DYSM25400 25 400 x 520 1
DYSM25800 25 800 x 920 1
DYSM26400 26 400 x 520 1
DYSM28450 28 450 x 570 1
DYSM30450 30 450 x 570 1
DYSM32450 32 450 x 570 1
DYSM35450 35 450 x 570 1
DYSM38450 38 450 x 570 1
DYSM40450 40 450 x 570 1
Effective from December 31, 2010. 16
1300 780 063www.ramset.com.au
CHISELS - R3™ PLUS PG 0206
Item Code Total Length (mm) Type Pack Qty
DHR3PCS 250 Point 1
DHR3FCS 250 20 mm Flat 1
DHR3SC040 250 40 mm Spade 1
CHISELS - R3™ MAX PG 0206
Item Code Total Length (mm) Type Pack Qty
DHSMPCS 280 Point 1
DHSMPCM 400 Point 1
DHSMPCL 600 Point 1
DHSMFCS 280 25mm Flat 1
DHSMFCM 400 25mm Flat 1
DHSMFCL 600 25mm Flat 1
DHSMSC080 300 50mm Spade 1
DHSMSC115 300 115mm Spade 1
DHSMSC050 400 50mm Spade 1
CORE BIT & STAR CUTTER RATIO SYSTEMS PG 0203
Item Code Diameter (mm) Description Pack Qty
DDHR12150 12 Pilot Bit 1
DCHR050 50 Core Bit 1
DCHR065 65 Core Bit 1
DCHR080 80 Core Bit 1
DCHR100 100 Core Bit 1
DAHR25280 - Extension 1
DASMHR - Adapt. R3 Max 1
DAR3HR - Adapt. R3 Plus 1
SHORT RIVETING DRILLS PG 0233
Item Code Drill Size Pack Qty
DSUS04DE 1/8" Double End 10
DSNS30DE No. 30 Double End 10
DSNS20DE No. 20 Double End 10
DSNS11DE No. 11 Double End 10
DYNADRILL™ ACCESSORIES PG 0280
Item Code Description Pack Qty.
054288 1
DAR3DH 1
DAR3HR 1
DASMR3 1
Quick Fit Keyless Chuck For 4kg Hammer
Chuck Adaptor - R3 Plus
Adaptor Ratio - R3 Plus
Adaptor R3 Max - R3 Plus
Effective from December 31, 2010. 17
1300 780 063www.ramset.com.au
DIAMOND DRILLING
DIAMOND DRILLING MACHINES PG 0210
Item Code Description Pack Qty
RM160 1
RM250 1
623003 1
TRIX160 Small Diamond Drilling Rig 1
TRIX350 Large Diamond Drilling Rig 1
AC1630P 30L Wet & Dry Vacuum Cleaner (Permanent Clean) 1
620900 50L Wet & Dry Vacuum Cleaner 1
DIAMOND DRILLING CORE BITS - WET PG 0213
Item Code Length (mm) Diameter (mm) Pack Qty
DCDS14300 300 14 1
DCDS16300 300 16 1
DCDS18300 300 18 1
DCDS20300 300 20 1
DCDS24300 300 24 1
DCDS26300 300 26 1
DCDS32300 300 32 1
DCDS35300 300 35 1
DCDS40300 300 40 1
DCDS45300 300 45 1
DCDS52300 300 52 1
DCDL52450 450 52 1
DCDL66450 450 66 1
DCDL76450 450 76 1
DCDL82450 450 82 1
DCDL91450 450 91 1
DCDL101450 450 101 1
DCDL116450 450 116 1
DCDL121450 450 121 1
DCDL126450 450 126 1
DCDL131450 450 131 1
DCDL142450 450 142 1
DCDL151450 450 151 1
DIAMOND DRY CUTTING MACHINE PG 0210
Item Code Description Pack Qty
RW150E Concrete Chaser 1
RM160 Driling Machine
1/2" BSP Thread
1 1/4" UNC
RM250 Drilling Machine
RM350 Drilling Machine
Effective from December 31, 2010. 18
1300 780 063www.ramset.com.au
DIAMOND DRILLING ACCESSORIES PG 0210
Item Code Description Pack Qty
624005 1
623395 1
623327 1
620827 1
624025 1
624026 1
622220 1
172710 1
624019 1
624020 5
624022 1
624023 5
622200 Sharpening Plate 1
622020 1
622070 1
172770 1
622100 1
644004 1
644006 1
644030 1
INDUSTRIAL ANGLE GRINDERS PG 0220
Item Code Description Pack Qty
RG230E 1
610980 Dust Hood for Angle Grinder 230mm - Grinding 1
610999 Dust Hood for Angle Grinder 230mm - Cutting 1
GR30FS Anti-Lock Flanges to suit Angle Grinder 230mm 1
SG125E 1
DIAMOND CUTTING BLADES PG 0213
Item CodeDiameter (mm) x Bore
Dia. (mm)Description Pack Qty
GC102TS 102 x 20 Turbo Super 1
610001 125 x 22 Titan + Concrete 1
610002 150 x 22 Titan + Concrete 2
610004 230 x 22 Titan + Concrete 1
610401 115 x 22 Titan + Universal 1
610411 125 x 22 Titan + Universal 1
610120 150 x 22 Titan + Universal 2
610431 180 x 22 Titan + Universal 1
610441 230 x 22 Titan + Universal 2
610210 125 x 22 Type A Abrasive 1
610220 150 x 22 Type A Abrasive 2
610240 230 x 22 Type A Abrasive 1
610046 125 x 22 Universal Silver 1
610045 230 x 22 Universal Silver 1
Modular Ring Connection
Vacuum Pump SDP101
Vacuum Set for TRIX160 Rig
Vacuum Set for TRIX350 Rig
Quick Release Connector Bolts
Portable Water Supply Unit
Water Collector for TRIX160 Rig
Water Collector for TRIX350 Rig
Concrete Grinder 125mm
Extension Rod 1/2" x 300mm
Extension Rod 1 1/4" x 400mm
Membranes to suit TRIX160 Water Collector
Membranes to suit TRIX350 Water Collector
Kit-Quick connection CDBR130
Quick Connection RM350/CDBR350
Core Bit Adaptor 1 1/4" x 1/2"
5 metre Antistatic Hose
Filter Kit for R1600-50 Vacuum
Accessory Kit for R1600-50 Vacuum
Kit with 5 Copper Rings
Angle Grinder 230 mm
Effective from December 31, 2010. 19
1300 780 063www.ramset.com.au
DIAMOND CUP WHEELS PG 0213
Item Code Diameter (mm) Description Pack Qty
610497 125 Turbo Abrs 1
610492 125 Turbo Hard 1
610477 125 Single Row Hard 1
610487 125 Single Row Abrs 1
610472 125 Double Row Hard 1
610482 125 Double Row Abrs 1
610494 125 Superturbo Hard 1
610499 125 Superturbo Abrs 1
610493 180 Turbo Hard 1
610468 180 Turbo Abrs 1
CUTOFF CENTRE WHEELS PG 0240
Item CodeDiameter (mm) x Bore
(mm)
Diameter (Imperial) x
Bore (Imperial)Pack Qty
GA230MCU7 230 x 22.2 9" x 7/8" 10
GA102SC16 102 x 16 4" x 5/8" 10
GA115SCU7 115 x 22.2 4 1/2" x 7/8" 10
GA127SCU7 127 x 22.2 5" x 7/8" 10
GA230SCU7 230 x 22.2 9" x 7/8" 10
GA356SC25 356 x 25 - 10
DEPRESSED CENTRE WHEELS PG 0240
Item Code
Diameter (mm) x
Width (mm) x Bore
(mm)
Diameter (Imperial) x Width (Imperial) x Bore (Imperial) Pack Qty
GA230SGU7 230x6x22.2 9"x1/4"x7/8" 10
LASER LEVELLING TOOLS PG 0230
Item Code Description Pack Qty
a RL300 Rotating Laser 1
b RLML 1
c RL5W Multi-Point Laser 1
d RLCL Cross Line Laser 1
e RLM50 Distance Meter 1
RLTP Tripod 1
RST5 Laser Measuring Staff 5M 1
RFSP Laser Floor to Ceiling Pillar 1
RWCM Laser Wall / Ceiling Mount 1
a b c d e
Multi-Liner Laser
Effective from December 31, 2010. 20
1300 780 063www.ramset.com.au
RAMSET™ SCREWDRIVERS & DRILLDRIVERS PG 0220
Item Code Description Pack Qty
CSD14A20C 1
DD514A24C 1
CIW280 1
BP1420 1
BP1424 1
UBC7224 Charger (60 min.) 1
CIW280BP 18V 2.6Ah Battery 1
CIW280CH 18V Charger 1
RCG600 1
MECHANICAL ANCHORING
PG 0333
Item CodeSize
(mm)
Length
(mm)Pack Qty
CW415 2.4 15 100
CW415Q500 2.4 15 500
CW420 2.4 20 100
CW420Q500 2.4 20 500
CD425 2.4 25 100
CW425 2.4 25 100
CW425Q500 2.4 25 500
CD430 2.4 30 100
CW430 2.4 30 100
CW430Q500 2.4 30 500
CD440 2.4 40 100
CW440 2.4 40 100
CD525 3.2 25 100
CK540 3.2 38 100
CD540 3.2 40 100
CF650 3.8 50 100
CF660 3.8 60 100
CF675 3.8 75 100
CK750 3.6 50 100
CK760 4.0 63 100
CK775 4.2 75 100
14V Cordless Drill Driver Kit
14V Cordless Hammer Drill Driver Kit
14V 2.0 Ah Battery
18V Cordless Impact Wrench
14V 2.4 Ah Battery
CONCRETE NAILS
13.2V Cordless Caulking Gun
Effective from December 31, 2010. 21
1300 780 063www.ramset.com.au
MECHANICAL ANCHORING
SpaTec™ Plus SAFETY ANCHORS PG 0306
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread Size (mm)Pack Qty
l SP10105 15 105 x M10 25
l SP10105F 15 105 x M10 25
u SP10110SS* 15 110 x M10 25
l SP12105 18 105 x M12 25
l SP12120 18 120 x M12 25
l SP12120F 18 120 x M12 25
u SP12120SS* 18 120 x M12 25
l SP16145 24 145 x M16 10
u SP16145ESS#* 24 145 x M16 10
l SP20170 28 170 x M20 5
# Hex nut assembly
* Available to order. Lead times apply.
Boa™ Coil ANCHORS - COMPLETE PG 0306
Item Code Anchor SizeAnchor Length
(mm)Pack Qty
l BAC08075 1/2"/13 mm 75 50
l BAC08100 1/2"/13 mm 100 25
l BAC10090 5/8"/16 mm 90 25
l BAC10125 5/8"/16 mm 125 25
l BAC12115 3/4"/19 mm 115 20
Boa™ Coil ANCHORS - COIL ONLY PG 0306
Item Code Anchor Size Pack Qty
l BAC08 1/2"/13 mm 100
l BAC10 5/8"/16 mm 50
l BAC12 3/4"/19 mm 50
HEAVY DUTY ANCHORS
l Carbon Steel Zinc Plated u Stainless Steel 316
Effective from December 31, 2010. 22
1300 780 063www.ramset.com.au
lPG 0303 / nPG 0320 / u PG 0318
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
l T06055 6 55 x M6 100
u T06055SS 6 55 x M6 100
l T06085 6 85 x M6 100
u T06085SS 6 85 x M6 100
l T06120 6 120 x M6 50
l T06150 6 150 x M6 100
l T06180 6 180 x M6 100
l T08065 8 65 x M8 50
u T08065SS 8 65 x M8 100
l T08090 8 90 x M8 50
l T08090GH 8 90 x M8 50
u T08090SS 8 90 x M8 50
l T10075 10 75 x M10 50
u T10075SS 10 75 x M10 50
l T10090 10 90 x M10 50
n T10090GH 10 90 x M10 50
u T10090SS 10 90 x M10 50
l T10120 10 120 x M10 20
l T12080 10 80 x M12 20
n T12080GH 12 80 x M12 20
u T12080SS 12 80 x M12 20
l T12100 12 100 x M12 20
n T12100GH 12 100 x M12 20
u T12100SS 12 100 x M12 20
l T12120 12 120 x M12 20
l T12140 12 140 x M12 20
n T12140GH 12 140 x M12 20
u T12140SS 12 140 x M12 20
l T12180 12 180 x M12 20
n T12180GH 12 180 x M12 20
l T16100 16 100 x M16 20
n T16100GH 16 100 x M16 20
u T16100SS 16 100 x M16 20
l T16125 16 125 x M16 20
n T16125GH 16 125 x M16 20
u T16125SS 16 125 x M16 20
l T16150 16 150 x M16 20
n T16150GH 16 150 x M16 20
u T16150SS 16 150 x M16 20
l T16175 16 175 x M16 20
n T16175GH 16 175 x M16 20
u T16175SS 16 175 x M16 20
l T20120 20 120 x M20 10
n T20120GH 20 120 x M20 10
u T20120SS 20 120 x M20 10
l Carbon Steel Zinc Plated n Hot Dipped Galvanised u Stainless Steel 316
TruBolt™ ANCHORS
Effective from December 31, 2010. 23
1300 780 063www.ramset.com.au
TruBolt™ ANCHORS (Cont.) lPG 0303 / nPG 0320 / u PG 0318
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
l T20160 20 160 x M20 10
n T20160GH 20 160 x M20 10
u T20160SS 20 160 x M20 10
l T20215 20 215 x M20 10
n T20215GH 20 215 x M20 10
TRUFAST PUSH-PULL ANCHORS PG 0303
Item Code Anchor Size (mm)Anchor Length
(mm)Pack Qty
l TFE06 6 55 100
l TFE06120 6 120 100
AnkaScrew™ ANCHORS PG 0340
Item CodeAnchor Size (mm) x
Anchor Length (mm)Head Type Pack Qty
l AS05030H 5 x 30 Hex Flange 100
l AS06050H 6 x 50 Hex Flange 100
p AS06050HGH 6 x 50 Hex Flange 100
l AS06075H 6 x 75 Hex Flange 100
p AS06075HGH 6 x 75 Hex Flange 100
l AS06100H 6 x 100 Hex Flange 100
p AS06100HGH 6 x 100 Hex Flange 100
l AS08060H 8 x 60 Hex Head 100
p AS08060HGH 8 x 60 Hex Head 100
l AS08075H 8 x 75 Hex Head 100
p AS08075HGH 8 x 75 Hex Head 100
l AS08100H 8 x 100 Hex Head 100
p AS08100HGH 8 x 100 Hex Head 100
l AS10060H 10 x 60 Hex Head 50
p AS10060HGH 10 x 60 Hex Head 50
l AS10075H 10 x 75 Hex Head 50
p AS10075HGH 10 x 75 Hex Head 50
l AS10100H 10 x 100 Hex Head 50
p AS10100HGH 10 x 100 Hex Head 50
l AS12075H 12 x 75 Hex Head 50
p AS12075HGH 12 x 75 Hex Head 50
l AS12100H 12 x 100 Hex Head 50
p AS12100HGH 12 x 100 Hex Head 50
l AS12150H 12 x 150 Hex Head 20
p AS12150HGH 12 x 150 Hex Head 20
Item Code Description Pack Qty
l RAP02 500 PG 0724Services Pack(500 x AS05030H+5/16"mag nutsetter)
MEDIUM DUTY ANCHORS
l Carbon Steel Zinc Plated n Hot Dipped Galvanised p Mechanically Galvanised u Stainless Steel 316
Effective from December 31, 2010. 24
1300 780 063www.ramset.com.au
DynaBolt™ ANCHORS HEX BOLT lPG 0300 / uPG 0318
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
l DP08045H 8 45 x M6 100
u DP08045HSS 8 45 x M6 100
l DP08070H 8 70 x M6 50
u DP08070HSS 8 70 x M6 50
l DP10045H 10 45 x M8 50
u DP10045HSS 10 45 x M8 50
l DP10055H 10 55 x M8 50
u DP10060HSS 10 60 x M8 50
l DP10080H 10 80 x M8 50
u DP10080HSS 10 80 x M8 50
l DP10105H 10 105 x M8 25
u DP10105HSS 10 105 x M8 25
l DP12065H 12 65 x M10 25
l DP12075H 12 75 x M10 25
u DP12075HSS 12 75 x M10 25
l DP12105H 12 110 x M10 20
l DP16110H 16 110 x M12 10
lPG 0300/ nPG 0320/ uPG 0318
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
l D6026 6 26 x M4.5 100
l DP06040 6 38 x M4.5 100
u DP06040SS 6 38 x M4.5 100
l DP06060 6 57 x M4.5 100
u DP06060SS 6 57 x M4.5 100
l DP08040 8 40 x M6 100
u DP08040SS 8 40 x M6 100
l DP08065 8 66 x M6 50
u DP08065SS 8 66 x M6 50
l DP08090 8 92 x M6 50
l DP10040 10 41 x M8 50
n DP10040GH 10 41x M8 50
l DP10050 10 49 x M8 50
n DP10050GH 10 49 x M8 50
u DP10050SS 10 49 x M8 50
l DP10075 10 76 x M8 50
n DP10075GH 10 76 x M8 50
u DP10075SS 10 76 x M8 50
l DP10100 10 103 x M8 25
n DP10100GH 10 103 x M8 25
u DP10100SS 10 103 x M8 25
l DP10125 10 124 x M8 25
l DP12060 12 55 x M10 25
l Carbon Steel Zinc Plated n Hot Dipped Galvanised u Stainless Steel 316
DynaBolt™ ANCHORS HEX NUT
Effective from December 31, 2010. 25
1300 780 063www.ramset.com.au
lPG 0300/ nPG 0320/ uPG 0318
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
n DP12060GH 12 55 x M10 25
u DP12060SS 12 55 x M10 25
l DP12070 12 70 x M10 25
n DP12070GH 12 70 x M10 25
u DP12070SS 12 70 x M10 25
l DP12100 12 98 x M10 20
n DP12100GH 12 98 x M10 20
u DP12100SS 12 98 x M10 20
l DP12125 12 126 x M10 20
n DP12125GH 12 126 x M10 20
u DP12125SS 12 126 x M10 20
l DP16065 16 62 x M12 20
n DP16065GH 16 62 x M12 20
l DP16110 16 106 x M12 10
n DP16110GH 16 106 x M12 10
l DP16140 16 140 x M12 10
n DP16140GH 16 140 x M12 10
l DP20080 20 81 x M16 10
n DP20080GH 20 81 x M16 10
l DP20115 20 113 x M16 5
n DP20115GH 20 113 x M16 5
l DP20160 20 157 x M16 5
DynaBolt™ ANCHORS DECORATIVE HEADS
Round Head PG 0300
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
l D6032R 6 32 x M4.5 100
l DP06055R 6 55 x M4.5 100
Flat Head lPG 0300/ uPG 0318
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
l D6034F 6 34 x M4.5 100
l DP06060F 6 60 x M4.5 100
u DP06060FSS 6 60 x M4.5 100
l DP06075F 6 75 x M4.5 100
u DP06075FSS 6 75 x M4.5 100
l DP06100F 6 100 x M4.5 100
l DP08060F 8 60 x M6 100
l DP08085F 8 85 x M6 50
l DP10075F 10 75 x M8 50
l DP10100F 10 100 x M8 50
l DP10125F 10 125 x M8 25
l Carbon Steel Zinc Plated n Hot Dipped Galvanised u Stainless Steel 316
DynaBolt™ ANCHORS HEX NUT (Cont.)
Effective from December 31, 2010. 26
1300 780 063www.ramset.com.au
DynaBolt™ SPECIALS PG 0300
Item Code Anchor Size (mm) Bolt Style Pack Qty
l D06026S 6 Set Lok 500
l D06038S 6 Set Lok 100
l D08042E 8 Tie Wire Dynabolt 100
l D08045K 6 Hook Bolt 100
l D08045X 6 Eyebolt 100
DynaBolt™ DECORATIVE POST HEADS l PG 0380/ uPG0318
Item Code Anchor Size (mm) Head Style Pack Qty
u DR045SS 6 Round 100
l DR06 8 Round 100
u DR06SS 8 Round 100
u DF045SS 6 Flat 100
l RFM06 8 Flat 100
u DF06SS 8 Flat 100
l REM06 8 Tie Wire 100
l RFM08 10 Flat 100
u DF08SS 10 Flat 100
l REM08 10 Tie Wire 100
l REM10 12 Tie Wire 50
DynaSet™ DROP-IN ANCHORS l PG 0312/ uPG 0318
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
l DSF06 8 25 x M6 100
l DSM06 8 25 x M6 100
u DSM06SS 8 25 x M6 100
l DSM08 10 30 x M8 100
u DSM08SS 10 30 x M8 50
l DSF10 12 30 x M10 50
l DSM10 12 40 x M10 50
u DSM10SS 12 40 x M10 50
l DSF12 16 50 x M12 50
l DSM12 16 50 x M12 50
u DSM12SS 15 50 x M12 50
l DSM16 20 65 x M16 25
u DSM16SS 20 60 x M16 25
l DSM20 25 80 x M20 25
l Carbon Steel Zinc Plated u Stainless Steel 316
Effective from December 31, 2010. 27
1300 780 063www.ramset.com.au
DynaSet™ DROP-IN ANCHORS PG 0724
Item Code Description Pack Qty
RAP06 500
RAP01 500
RAP12 200
DynaSet™ SETTING TOOLS PG 0380
Item Code Pack Qty
SETDS1 1
SETDS2 1
SETDF3 1
SETDS3 1
SETDS4 1
SETDS5 1
SETDS6 1
pPG320/ uPG 0319
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
u RSR12SS 16 138 x M12 4
p RSR12GM 16 138 x M12 4
SETSA4 Setting Tool 1
Item Code DescriptionAnchor Length (mm) x
Thread SizePack Qty
u DSM12SS Dynaset 50 x M12 50
Loxin™ SHIELD ANCHORS PG 0312
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
l RLM08 16 52 x M8 25
l RLM10 16 52 x M10 25
l RLM12 22 65 x M12 25
l RLM16 26 75 x M16 25
Elect.Mech. Services Pk (500 x DSF06 + set tool)
DSM16/DSM16SS
DynaSet™ SAFETY RING ANCHORS Note: Request Ramset™ Tech Data Sheet for installation instructions.
DSM10/DSM10SS
DSM12/DSF12/DSM12SS
DSM20
To Suit Dynaset
Elect. Mech. Services Pk(500 x DSF10 + set tool)
Elect. Mech. Services Pk (200 x DSF12 + set tool)
DSM08/DSM08SS
DSF10
DSM06/DSF06/DSM06SS
l Carbon Steel Zinc Plated u Stainless Steel 316 p Mechanically Galvanised
Effective from December 31, 2010. 28
1300 780 063www.ramset.com.au
RediDriveTM PG0314
Item Code Anchor Size (mm)Anchor Length
(mm)Pack Qty
p RD05030 5 30 100
p RD05040 5 40 100
p RD05050 5 50 100
p RD05065 5 65 100
p RD05075 5 75 100
ShureDriveTM
ANCHORS lPG 0315/ uPG 0318
Item Code Anchor Size (mm)Anchor Length
(mm)Pack Qty
l SDM05022 5 22 100
l SDM06030 6 30 100
u SDM06030SS 6 30 100
l SDM06050 6 50 100
ELECTRICAL SUPPORT FIXINGS
Item CodeCapacity
(mm)Type Pack Qty
CHLD Cable bundles Cable Holder + Anchor 50 DynaClip
CWE05040 Cat wire Cat Wire Eye 100 PG 0718
DK10 8 – 10 Dynaclip 100
DK20 16 - 20 Dynaclip 100
DK32 25 - 32 Dynaclip 100
VF1 1.6 - 2.5 Vertical Flange Clip 100
HF01 Flange clip for chain 100 Vertical Flange Clip
RamPlugsTM
- STANDARD PG 0330
Item Code Anchor Size (mm)Anchor Length
(mm)Pack Qty
DNP05 5 25 100
DNP06 6 30 100
DNP07 7 30 100
DNP08 8 40 100
DNP10 10 50 50
DNP12 12 60 25
RamPlugsTM
- LONG PG 0330
Item Code Anchor Size (mm)Anchor Length
(mm)Pack Qty
DLP08 8 80 100
DLP10 10 80 50
CatWire Eye
PG 0724
Cable Holder
l Carbon Steel Zinc Plated u Stainless Steel 316 p Mechanically Galvanised
LIGHT DUTY ANCHORS
Effective from December 31, 2010. 29
1300 780 063www.ramset.com.au
RamPlugsTM
- ULTRA LONG PG 0330
Item Code Anchor Size (mm)Anchor Length
(mm)Pack Qty
l DUP10080F 10 80 25
l DUP10080H 10 80 25
l DUP10100F 10 100 25
l DUP10100H 10 100 25
l DUP10135F 10 135 25
l DUP10135H 10 135 25
l DUP10160F 10 160 25
l DUP10160H 10 160 25
InsulFastTM
DRILL ANCHORS PG 0331
Item Code Anchor Size (mm)Insulation Thickness
(mm)Pack Qty
CB5060 8 50 to 60 200
CB7080 8 70 to 80 200
CB90100 8 90 to 100 200
ASRCA38C 6 up to 65mm 200
HOLLOW WALL ANCHOR PG 0500
Item Code Thread Size Wall Thickness (mm) Pack Qty
HW05M4 M4 Up to 5 100
HW10M4 M4 6 – 10 100
HW10M4P M4 6 – 10 100
HW13M4 M4 8 – 13 100
HW24M4 M4 16 - 24 100
HW38M4 M4 34 - 38 100
HW14M5 M5 7 – 14 100
HW16M6 M6 6 – 16 100
HOLLOW WALL ANCHOR SETTING TOOL PG580
Item Code Description Pack Qty
SETHWG 1
ToggleMate™ and WallMate™ PG 0500
Item CodeScrew Gauge x Min.
Screw Length (mm)
Wall Thickness
(mm)Pack Qty
TM16 8 x 20 10 – 13 50
WMZ 8 x 20 10 – 12 100
WM25 6 - 8 x 20 10 – 12 100
l Carbon Steel Zinc Plated
Hand Setting Tool - Gun
Effective from December 31, 2010. 30
1300 780 063www.ramset.com.au
RamToggle™ PG 0500
Item Code Hole Size (mm) Wall Thickness (mm) Pack Qty
RT10 8 5 – 10 100
RT12 8 8 – 12 100
RT16 8 12 – 18 100
SPRING TOGGLE PG 0500
Item Code Pack Qty
STR04050 100
STR05050 100
STF05050 100
STR05075 50
STF05075 50
STR05100 50
HOOK TOGGLE PG 0500
Item Code Pack Qty
STK05050 50
WALL GRABB'RTM PG 0500
Item CodeScrew Length (mm) x
GaugeWall Thickness (mm) Pack Qty
GP16 30 x 8 16 100
NYLON ANCHORS lPG 0503/ uPG 0318
Item CodeAnchor Size (mm) x
Anchor Length (mm)Head Type Pack Qty
l TNM325 5 x 25 Mushroom 100
u TNM325SS 5 x 25 Mushroom 100
l TNR325 5 x 25 Round 100
u TNR325SS 5 x 25 Round 100
l TNL325 5 x 25 Flat 100
l TNR338 5 x 38 Round 100
l TNF425 6.5 x 25 Countersunk 100
l TNM425 6.5 x 25 Mushroom 100
u TNM425SS 6.5 x 25 Mushroom 100
l TNR425 6.5 x 25 Round 100
l TNF438 6.5 x 38 Countersunk 100
l TNM438 6.5 x 38 Mushroom 100
l TNR438 6.5 x 38 Round 100
l TNF450 6.5 x 50 Countersunk 100
l TNM450 6.5 x 50 Mushroom 100
l TNR450 6.5 x 50 Round 100
l TNF475 6.5 x 75 Countersunk 50
l TNM475 6.5 x 75 Mushroom 50
1/8" x 50
3/16" x 50
3/16" x 50
3/16" x 75
3/16" x 75
Screw Gauge x Screw Length (mm)
3/16" x 100
Screw Gauge x Screw Length (mm)
3/16" x 50
l Carbon Steel Zinc Plated u Stainless Steel 316
Effective from December 31, 2010. 31
1300 780 063www.ramset.com.au
EasyDriveTM
ANCHORS lPG 0503/ uPG 0318
Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty
l ED05033 5 33 100
u ED05033SS 5 33 100
l ED05050 5 50 100
l ED06042 6 42 100
u ED06042SS 6 42 100
l ED06055 6 55 100
u ED06055SS 6 55 100
l ED06075 6 75 100
u ED06075SS 6 75 100
l ED08080 8 80 50
l ED08120 8 120 50
PLASTIC SPAGHETTI PG 0515
Item CodeDrill Size
(mm)Pack Qty Metres
RSP 5 50
463609 5 5
PLASTIC PLUGS (FRAME PACKS) PG 0506
Item CodeLength (mm) x Drill
Size (mm)Colour Pack Qty
WPWH25 25 x 5 White 1000
WPRD25 25 x 6 Red 1000
WPRD32 32 x 6 Red 1000
WPRD38 38 x 6 Red 1000
WPRD50 50 x 6 Red 1000
WPGR25 25 x 7 Green 1000
WPGR32 32 x 7 Green 1000
WPGR38 38 x 7 Green 500
WPGR50 50 x 7 Green 500
WPBU38 38 x 8 Blue 500
WPBU50 50 x 8 Blue 500
ROLL PLUGS PG 0506
Item CodeLength (m) x Drill Size
(mm)Colour Roll Qty
720115 100 x 6 Red 1
720122 100 x 7 Green 1
720139 100 x 8 Blue 1
l Carbon Steel Zinc Plated u Stainless Steel 316
Effective from December 31, 2010. 32
1300 780 063www.ramset.com.au
CONCRETERS AND BUILDERS ACCESSORIES
FERRULES - STILETTO ROUND BAR
Item CodeThread Size x Thread
Length (mm)
Ferrule Length
(mm)Pack Qty
l FS16070 M16 x 32 70 50
n FS16070GH M16 x 32 70 50
l FS16095 M16 x 39 95 50
n FS16095GH M16 x 39 95 50
l FS20070 M20 x 32 70 50
n FS20070GH M20 x 32 70 50
l FS20095 M20 x 39 95 50
n FS20095GH M20 x 39 95 50
FERRULES - ELEPHANT FEET
Item CodeThread Size x Thread
Length (mm)
Ferrule Length
(mm)Pack Qty
l FE10045 M10 x 20 45 250
l FE12055 M12 x 25 55 200
n FE12055GH M12 x 25 55 200
l FE12095 M12 x 25 95 100
n FE12095GH M12 x 25 95 100
l FE16070 M16 x 32 70 100
n FE16070GH M16 x 32 70 100
l FE16095 M16 x 32 95 75
n FE16095GH M16 x 32 95 75
l FE20070 M20 x 32 70 75
n FE20070GH M20 x 32 70 75
l FE20095 M20 x 38 95 50
n FE20095GH M20 x 38 95 50
l FE24095 M24 x 50 95 40
n FE24095GH M24 x 50 95 40
FERRULES - STAINLESS STEEL
Item CodeThread Size x Thread
Length (mm)
Ferrule Length
(mm)Pack Qty
u FE10045SS M10 x 20 45 250
u FE12055SS M12 x 25 55 200
u FE16070SS M16 x 32 70 100
u FE20095SS M20 x 45 95 50
RAMSETTM
STORAGE
Item Code Description Pack Qty
RFB 1
l Carbon Steel Zinc Plated n Hot Dipped Galvanised u Stainless Steel 316
RamsetTM
Fastener Box
Products on pgs 33 & 34 also distributed by ReidTM
Effective from December 31, 2010. 33
1300 780 063www.ramset.com.au
FERRULE ACCESSORIES
Item Code Description Thread Size Pack Qty
FM12N Nailing Plate - RED M12 100
FM16N Nailing Plate - GREEN M16 100
FM20N Nailing Plate - BLUE M20 100
FM24N Nailing Plate - YELLOW M24 100
FWSC125 50
FWSC150 50
FWSC175 50
FWSC200 50
FSC25 50
FSC50 50
FSC75 50
FSC100 50
SWIFTSHIM
Item Code Thickness Pack Qty
SHIM01 1mm 100
SHIM02 2mm 200
SHIM03 3mm 100
SHIM05 5mm 100
SHIM10 10mm 40
SHIM15 15mm 40
SHIM20 20mm 30
ACCESSORIES
Item Code Description Pack Qty
BBLSL20 Bondbreaker LS 20Litre
BBLSL205 Bondbreaker LS 200Litre
RPPS01 Hand Spraying Unit 1
RBH 1
DSR16 25
DSR20 25
RPF 75m
RFF 75m
RPFJ 30m
RFFJ 30m
PFC Fillet Shear 1
Stiletto Ferrule Chair - 50mm
Stiletto Ferrule Chair - 75mm
Stiletto Ferrule Chair -100mm
Panel False Joint (40mm x 12mm) - 3 metre length
Support Chair - 150mm
Stiletto Ferrule Chair - 25mm
Support Chair - 125mm
Form False Joint (40mm x 12mm) - 3 metre length
Support Chair - 175mm
Support Chair - 200mm
Dowelsert to suit 16 diam Round Bar
Dowelsert to suit 20 diam Round Bar
Panel Fillet (12mm x 12mm) - 3 metre length
Rambar Leverage Tool
Form Fillet (17mm x 17mm) - 3 metre length
Effective from December 31, 2010. 34
1300 780 063www.ramset.com.au
CHEMICAL ANCHORINGChemSet™ 101 General Purpose Polyester Anchoring Adhesive PG 0403
Item Code Description Pack Qty
ISKP 10
C101J 12
C101C 20
ISNP 5
* Kit consists of 2 x 380 ml cartridges + 4 x mixer nozzles
ChemSet™ 801 Heavy Duty Epoxy Anchoring Adhesive PG 0403
Item Code Description Pack Qty
C801C 24
C801J 12
ISNE 5
ChemSet™ Reo502™ Extra Heavy Duty Epoxy Anchoring Adhesive PG 0404
Item Code Description Pack Qty
REO502J 12
ISNE 5
ISNET 5
ChemSet™ Maxima™ Anchoring Capsules PG 0400
Item Code Anchor Size (mm) Pack Qty
CHEM08 M8 10
CHEM10 M10 10
CHEM12 M12 10
CHEM16 M16 10
CHEM2024 M20 & M24 6
PG 0440
Item CodeSleeve Length (mm) x
Drill Size (mm)To Suit Stud Pack Qty
ISS08 64 x 12 M8 100
ISS10 64 x 14 M10 100
ISS12 64 x 16 M12 100
ChemSet™ Metal Mesh Sieves for Hollow Masonry Anchoring with ChemSet™ 101 PG 0440
Item CodeSleeve Length (mm) x
Drill Size (mm)To Suit Stud Pack Qty
ISM10 1000 x 12 M6/M8 1
ISM12 1000 x 16 M10/M12 1
ISM16 1000 x 22 M16 1
Mixer nozzles for Reo502™ Fast Dispensing
ChemSet™ 801 Jumbo (750ml) + Mixer Nozzle
Mixer Nozzle for ChemSet™ 101
ChemSet™ Reo502™ (750ml) + Mixer Nozzle
Mixer nozzles for Reo502™
ChemSet™ Nylon Sleeves for Hollow Masonry Anchoring with ChemSet™ 101
Mixer Nozzle for ChemSet™801
Standard ChemSet™ 101 Kit*
ChemSet™ 101 Jumbo (750ml) + Mixer Nozzle
ChemSet™ 801 Cartridge (380ml) + Mixer Nozzle
ChemSet™ 101 Cartridge (380ml) + Mixer Nozzle
Effective from December 31, 2010. 35
1300 780 063www.ramset.com.au
ChemSet™ Retaining Collars for Overhead Anchoring with ChemSet™ 101 PG 0440
Item Code Anchor Size (mm) To Suit Anchor Pack Qty
ISR10 10 CS10130 100
ISR12 12 CS12160 100
ISR16 16 CS16190 100
REMEDIAL BRICK WALL TIES (for use with ChemSet™ 101) PG 0440
Item Code MaterialAnchor Length
(mm)Pack Qty
RA225 Nylon 220 100
ChemSet™ ANCHOR STUDS l PG 0406/ n PG 0320/ u PG 0318
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
l CS08110 8 110 x M8 10
n CS08110GH 8 110 x M8 10
u CS08110SS 8 110 x M8 10
l CS10130 10 130 x M10 10
n CS10130GH 10 130 x M10 10
u CS10130SS 10 130 x M10 10
l CS12160 12 160 x M12 10
n CS12160GH 12 160 x M12 10
u CS12160SS 12 160 x M12 10
l CS12180 12 180 x M12 10
l CS16190 16 190 x M16 10
n CS16190GH 16 190 x M16 10
u CS16190SS 16 190 x M16 10
l CS20260 20 260 x M20 6
n CS20260GH 20 260 x M20 6
u CS20260SS 20 260 x M20 6
l CS24300 24 300 x M24 6
n CS24300GH 24 300 x M24 6
u CS24300SS 24 300 x M24 6
Threaded Inserts - Internally Threaded Anchors PG0404
Item Code Anchor Size (mm)Anchor Length (mm) x
Thread SizePack Qty
l 062770 8 60 x M8 10
u 062860 8 60 x M8 10
l 062480 10 65 x M10 10
u 062960 10 65 x M10 10
l 062760 12 75 x M12 10
u 063100 12 75 x M12 10
l 062800 16 125 x M16 10
u 051175 16 125 x M16 10
l 062810 20 170 x M20 10
l Carbon Steel Zinc Plated n Hot Dipped Galvanised u Stainless Steel 316
Effective from December 31, 2010. 36
1300 780 063www.ramset.com.au
ChemSet™ SYSTEMS APPLICATORS PG 0403
Item Code Description Pack Qty
CUA Chemset™ Universal Applicator* 1
CUAPN 1
C380A 1
*For dispensing ChemSet™ 101, ChemSet™ 801 and ChemSet™ Reo 502™ Cartridges
**For dispensing ChemSet™ 101 380 ml Cartridge (C101C)
ChemSet™ HOLE CLEANING ACCESSORIES PG 0440
Item Code Anchor Size (mm) Description Pack Qty
HCBT13 8 – 12 Brush 1
HCBT20 16 - 20 Brush 1
HCBT26 20 - 24 Brush 1
HCP - Dust Blower 1
HCPHV - High Volume Dust Blower 1
For cleaning dust from holes in concrete
ChemSet™ Anchoring Kit
Item Code Description Pack Qty
CHEMKITBAG Tool bag, CUA, HCPHV,HCBT13,HCBT20,HCBT26 1
Pneumatic Universal Applicator*
Chemset™ Applicator 380ml**
Effective from December 31, 2010. 37
1300 780 063www.ramset.com.au
RAMSET™ SCREWS PG 1050
Item Code GaugeScrew Length
(mm)Order Qty
l RSC08025YSF 8 25 1000
l RSC08028YSF 8 28 1000
l RSC08035YSF 8 35 1000
l RSC08041YSF 8 41 1000
l RSC08045YSF 8 45 1000
l RSC08051YSF 8 51 1000
PG 1040
Item Code GaugeScrew Length
(mm)Order Qty
l RSN06025YBT 6 25 1000
l RSN06030YBT 6 30 1000
l RSN06041YBT 6 41 1000
l RSN08065YBT 8 65 1000
PG 1044
Item Code Gauge - PitchScrew Length
(mm)Order Qty
l RSD06025YBB 6 – 20 25 1000
l RSD06030YBB 6 – 20 30 1000
l RSD06045YBB 6 – 20 45 1000
PLASTERBOARD SCREWS - COLLATED NEEDLE POINT TWINFAST THREAD
Item Code GaugeScrew Length
(mm)Order Qty
l RSN06025YBTC 6 25 1000
l RSN06032YBTC 6 32 1000
l RSN06041YBTC 6 41 1000
PLASTERBOARD SCREWS - COLLATED DRILL POINT TWINFAST THREAD
Item Code GaugeScrew Length
(mm)Order Qty
l RSD06025YBTC 6 25 1000
l RSD06032YBTC 6 32 1000
l RSD06041YBTC 6 41 1000
CHIPBOARD SCREWS - COUNTERSUNK SELF EMBEDDING HEAD COARSE THREAD
PLASTERBOARD SCREWS - BUGLE HEAD DRILL POINT TWINFAST THREAD
l Carbon Steel Zinc Plated
PLASTERBOARD SCREWS - BUGLE HEAD NEEDLE POINT TWINFAST THREAD
Effective from December 31, 2010. 38
1300 780 063www.ramset.com.au
PLASTERBOARD SCREWS - BUGLE HEAD NEEDLE POINT COARSE THREAD PG 1042
Item Code GaugeScrew Length
(mm)Order Qty
l RSN07025YBF 7 25 1000
l RSN07030YBF 7 30 1000
l RSN10038YBF 10 38 1000
PG 1005
Item Code Gauge - PitchScrew Length
(mm)Order Qty
l RSN08012YLT 8 – 15 12 1000
l RSN08016YLT 8 – 15 16 1000
l RSN08025YLT 8 – 15 25 1000
l RSN08032YLT 8 – 15 32 1000
PG 1010
Item Code Gauge - PitchScrew Length
(mm)Order Qty
v RQ512032MHC 12 – 24 32 1000
v RQ512050MHC 12 – 24 50 1000
PG 1003
Item Code Gauge - PitchScrew Length
(mm)Order Qty
l RSD08012YLB 8 – 18 12 1000
l RSD08016YLB 8 – 18 16 1000
METAL SCREWS - WAFER HEAD DRILL POINT PG 1003
Item Code Gauge - PitchScrew Length
(mm)Order Qty
l RSD08012YWB 8 – 18 12 1000
l RSD10016YWB 10 – 16 16 1000
METAL SCREWS - HEX WASHER SERIES 5 EXTENDED DRILL POINT
METAL SCREWS - LARGE WAFER (TRUSS) HEAD DRILL POINT
CABINET SCREWS - LARGE WAFER (TRUSS HEAD) NEEDLE POINT TWINFAST THREAD
l Carbon Steel Zinc Plated v XP3TM
AS3566 Class 3
Effective from December 31, 2010. 39
1300 780 063www.ramset.com.au
PG 1003
Item Code Gauge - PitchScrew Length
(mm)Order Qty
l RSDSHZY1016 10 – 16 16 1000
l RNPSHZY1016 10 – 16 16 1000
PG 1007
Item Code GaugeScrew Length
(mm)Order Qty
l RSN08020YST 8 20 1000
lPG 1002 / vPG 1013
Item Code Gauge - PitchScrew Length
(mm)Order Qty
l RSD06050YSBW 6 – 20 50 1000
v RSD08022MSBW 8 – 18 22 1000
v RSD08032MSBW 8 – 18 32 1000
v RSD08040MSBW 8 – 18 40 1000
l RSD10045YSBW 10 – 16 45 1000
l Carbon Steel Zinc Plated v XP3TM
AS3566 Class 3
CEMENT SHEET SCREWS - COUNTERSUNK SELF EMBEDDING WINGED DRILL POINT
METAL SCREWS - FLAT HEAD DRILL AND NEEDLE POINT
CEMENT SHEET SCREWS - COUNTERSUNK SELF EMBEDDING HEAD NEEDLE POINT TWINFAST THREAD
Effective from December 31, 2010. 40
1300 780 063www.ramset.com.au
CONSTRUCTION CHEMICALS
SEALANTS
Item Code Colour Pack Size Carton Qty
ROOF SEAL NEUTRAL CURE ROOFING & PLUMBING SILICONE PG 0800
RFSLTRG300 Translucent 300 ml 20
RFSLALG300 Aluminium 300 ml 20
RFSLGYG410 Grey 300 ml 20
WATER SEAL ACETIC CURE SANITARY SILICONE PG 0800
WRSLWHG300 White 300 ml 20
WRSLTRG300 Translucent 300 ml 20
HiSeal™ POLYURETHANE CONSTRUCTION SEALANT PG 0800
HYSLGYG375 Grey 300 ml 25
HYSLGYG720 Grey 600 ml 20
DynaSeal™ URETHANE ACRYLIC CONSTRUCTION SEALANT PG 0800
DYSLGRG450 Grey 300 ml 20
DYSLGYG900 Grey 600 ml 15
BlazeBrake™ 201 ACRYLIC FIRE RATED SEALANT PG 0800
BLBRGYC Grey 300 ml 20
BLBRGYS Grey 600 ml 15
FyreBrake™ POLYURETHANE FIRE RATED SEALANT PG 0800
FYBRGYS Grey 600ml 12
DuctSeal™ ACRYLIC SEALANT FOR DUCTWORK PG 0800
DSLWG450 Grey 300 ml 20
GAP SEAL PAINTABLE GAP SEALANT PG 0800
GPSLWHG450 White 300 ml 20
Effective from December 31, 2010. 41
1300 780 063www.ramset.com.au
BARREL GUN, CAULKING GUNS AND ACCESSORIES FOR SEALANTS PG 0880
Item Code Description Carton Qty
CAGU850 1
CAGU300 1
SABGU37 1
BGUNS Nozzle Set Assorted for SABGU37 (Pack of 5) 1
BGUNOZ Nozzle Set Natural for SABGU37 (Pack of 10) 1
POLYETHYLENE CLOSED CELL FOAM BACKER ROD PG 0824
Item Code ColourDiameter
(mm)Length (m)
BRPE06 White 6 250
BRPE10 White 10 250
BRPE13 White 13 50
BRPE15 White 15 50
BRPE20 White 20 50
BRPE25 White 25 2
BRPE30 White 30 2
BRPE40 White 40 2
BRPE50 White 50 2
HORSE SHOE SHIMS PG 0824
Item Code ColourProduct Size
(mm)Carton Qty Bag
SHIM01575 Brown 75 x 37 x 1.5 (52 x 13) 1000
SHIM0375 Green 75 x 37 x 3 (52 x 13) 1000
SHIM0575 Yellow 75 x 37 x 5 (52x13) 1000
SHIM06575 White 75 x 37 x 6.5 (52x13) 500
SHIM1075 Black 75 x 37 x 10 (52x13) 500
SHIM01590 Brown 90 x 37 x 1.5 (66 x 13) 1000
SHIM0390 Green 90 x 37 x 3 (66 x 13) 1000
SHIM0590 Yellow 90 x 37 x 5 (66 x 13) 1000
SHIM1090 Black 90 x 37 x 10 (66 x 13) 500
ADHESIVES
NailFree™ Construction Adhesive PG 0821
Item Code Description Pack Size Carton Qty
NFCAG320 300 ml Cartridge 300 ml 10
NFCAG930 900 ml Cartridge 900 ml 10
Caulking Gun for 850ml / 900 ml Cart.
Caulking Gun for 300ml Cart.
37cm Barrel Gun for sealant sausages
Effective from December 31, 2010. 42
1300 780 063www.ramset.com.au
SAFE-T-BOND™ Water Clean Up Construction Adhesive PG 0821
Item Code Description Pack Size Carton Qty
STBDL1 1 L Sachet 1 Litre 10
Ramset™ Fomofill™ Self-Expanding Gap Filling Foam PG 0803
Item Code Description Pack Size Carton Qty
FMFLG500 Fomofill™ 500 ml 12
FMFLG750 Fomofill™ 750 ml 12
FomoPlus™ Applicator Foam PG 0803
Item Code Description Carton Qty
FMPLG750 Fomoplus™ 750 ml Canister 12
FMPLGU Fomoplus™ Applicator Gun 1
FMPLGU300 1
Fomo™ Aerosol Solvent Cleaner for FomoPlus™ Applicators
Item Code Description Pack Size Carton Qty
FMSVM500 Fomo™ Solvent 500 ml 12
CONCRETE REPAIR
Item Code Colour Pack Size Carton Qty
Epoxy Putty - Epoxy Repair Compound for Concrete PG 0815
EPPYL1 Grey 1 litre 1
EPPYL2 Grey 2 litre 1
EPPYL4 Grey 4 litre 1
EPPYL20 Grey 20 litre 1
Epoxy Patch - Pourable Epoxy Resin for Concrete Repair PG 0815
EPPHL1 Amber 1 litre 1
EPPHL3 Amber 3 litre 1
EPPHL20 Amber 20 litre 1
Epoxy Grout - Epoxy Grouting Compound PG 0815
EPGRL2 Grey 2 litre 1
EPGRL4 Grey 4 litre 1
EPGRL16 Grey 16 litre 1
Fomoplus™ Applicator Gun Metal
Effective from December 31, 2010. 43
1300 780 063www.ramset.com.au
CEMENTITIOUS GROUTS PG 0812
Item Code Description Pack Size Qty
RPGMP Premier Grout MP 20kg 1
830104Ultrafix™
Concremate™10kg 1
830111Ultrafix™
Concremate™25kg 1
Fine Grade Filler for Epoxy Patch and Epoxy Grout PG 0812
Item Code Description Pack Size Qty
RFLFG Fine Grade Fillers 20kg 1
Mixing Paddles for Grouts and Epoxies PG 0880
Item Code Description Qty
SSMP Small Spiral Mixing Paddle 1
LSMP Large Spiral Mixing Paddle 1
CONCRETE ADDITIVES
Item Code Description Pack Size Qty
CemCrete™ Bonding and Sealing Agent PG 0809
CMCRL5 Cemcrete™ 5 litre 1
CMCRL20 Cemcrete™ 20 litre 1
Concrebond™ Acrylic Bonding and Sealing Agent PG 0809
CNBDL20 Concrebond™ 20 litre 1
Effective from December 31, 2010. 44
1300 780 063www.ramset.com.au
FIRE PROTECTION AND SUSPENSION SYSTEMSFIRE PROTECTION OF PIPE PENETRATIONS
RAMSETTM
FIRE COLLARS CAST IN STACKWORK (TALLS) PG0724
Item Code Pipe TypeDiameter Size
(mm)Carton Qty
RFCH65S PVC/HDPE PPR PVC 40/50/65. HDPE 75. PPR32/40/50/65/75 30
RFCH100S PVC/HDPE PP/PPR PVC 80/90/100. HDPE 100. PP100. PPR 90/110 18
RFCH150S PVC/PE PVC 150. PE 150. 4
RAMSETTM
FIRE COLLARS CAST IN STACKWORK (SHORT)
Item Code Pipe TypeDiameter Size
(mm)Carton Qty
RFCL40S PVC / PPR PVC 40. PPR32/40 90
RFCL50S PVC / PPR PVC 50. PPR50 90
RFCL65S PVC / PPR PVC 65. PPR63 90
RFCL80S PVC / PPR PVC 80. PPR75 50
RFCL90S PVC / PPR PVC 90. PPR90 50
RFCL100S PVC/HDPE/PP/PPR PVC 100. HDPE100. PP100. PPR110 50
RAMSETTM
FIRE COLLARS RETROFIT STACKWORK (LOW PROFILE)
Item Code Pipe TypeDiameter Size
(mm)Carton Qty
RFC100R PVC/HDPE PVC 80/90/100. HDPE 100. PPR 100 (WALL). PE 100 (WALL) 8
RFC65R PVC PVC 40/50/65. PVC 50 (WALL) 24
Consult technical data for tested applications and fire ratings before comencing use. Go to www.ramset.com.au.
FIRE COLLARS CAST IN STACKWORK (TALLS) PG0724
Item Code Pipe TypeDiameter Size
(mm)Carton Qty
SNAPH50S PVC 40/50 60
SNAPH100S PVC/HDPE 65/80/90/100 18
SNAPH150S PVC/HDPE/PPR/PE 150 1
PG0724
FIRE COLLARS CAST IN -FLOOR WASTE (TALLS)
Item Code Pipe TypeDiameter Size
(mm)Carton Qty
SNAPH50FWS PVC/HDPE/ PPR/PE 40/50 60
Consult technical data for tested applications and fire ratings before comencing use. Go to www.ramset.com.au.
Effective from December 31, 2010. 45
1300 780 063www.ramset.com.au
FIRE COLLARS CAST IN -FLOOR WASTE (SHORT) PG0724
Item Code Pipe TypeDiameter Size
(mm)Carton Qty
SNAPL80FWS PVC/HDPE/ PPR/PE 80 24
SNAPL100FWS PVC/HDPE/ PPR/PE 100 24
FIRE COLLARS RETROFIT (STEEL) LOW PROFILE PG0724
FLOORWASTE AND STACKWORK
Item Code Pipe TypeDiameter Size
(mm)Carton Qty
SNAPLP100R PVC 65/80/90/100 2
FSC50B PVC/HDPE 40/50 1
FIRE RATED EXPANDING PU FOAM PG0724
Item Code Size Description Carton Qty
FRF700 750 ml BlazeBrake™ FR Foam 12
Consult technical data for tested applications and fire ratings before comencing use. Go to www.ramset.com.au.
ALLTHREAD ROD AND ACCESSORIES
ALLTHREAD ROD PG 0721
Item Code Thread SizeThread Length
(mm)Pack Qty
RTRM10L3 M10 3000 10
RTRM12L3 M12 3000 10
NUTS / WASHERS PG 0724
Item Code Thread Size Description Pack Qty
HNM10 M10 HEX NUT ZP 200
HNM12 M12 HEX NUT ZP 200
RWM10Suit M10
(25mm OD)Round Washer ZP 200
RWM12Suit M12
(28mm OD)Round Washer ZP 200
COUPLINGS PG 0721
Item Code Thread SizeThread Length
(mm)Pack Qty
RTCM10 M10 30 50
Effective from December 31, 2010. 46
1300 780 063www.ramset.com.au
CHANNEL PROFILES, SUPPORTS AND ACCESSORIES
COMBINATION CLIP (Channel and individual mount) PG0724
Item Code DescriptionDiameter Size
(mm)Carton Qty
363015 Combination Clip 15-16 100
363020 Combination Clip 20-25 100
363028 Combination Clip 28-32 50
363035 Combination Clip 35-42 50
363050 Combination Clip 50 50
CHANNEL PERFORATED (GALV) PG0724
Item Code Description Length Pack Qty
333030RA 12
RAPID CHANNEL RAIL BOLT PG0724
Item Code Description Thread Size x Length Carton Qty
334930 100
RAPID ISOPHONIC CLAMP M8/M10 (Standard Duty) PG0724
Item Code Carton Qty
114020 50
114025 50
114033 50
114036 25
114042 25
114052 25
114060 25
114075 25
114090 25
114110 25
ISOPHONIC CLAMP M8/M10 (Heavy Duty) PG0724
Item Code Carton Qty
115054 25
115070 25
115083 25
115100 25
115110 25
115160 25
Rail Bolt (27/18mm) M10 x 30mm
Channel perf (27/18mm) 2 Metres
Rapid Isophonic M8/M10 57-60
Rapid Isophonic M8/M10 42-44
Rapid Isophonic M8/M10 52-54
Isophonic M8/M10 53-56
Description Diameter Size (mm)
Rapid Isophonic M8/M10 20-22
Rapid Isophonic M8/M10 108-114
Description Diameter Size (mm)
Isophonic M8/M10 81-86
Isophonic M8/M10 99-105
Isophonic M8/M10 107-112
Isophonic M8/M10 159-166
Rapid Isophonic M8/M10 74-80
Rapid Isophonic M8/M10 83-91
Rapid Isophonic M8/M10 25-27
Rapid Isophonic M8/M10 33-35
Rapid Isophonic M8/M10 36-38
Isophonic M8/M10 68-72
Effective from December 31, 2010. 47
1300 780 063www.ramset.com.au
SURFACE MOUNT PLATES PG0724
Item Code Description Size (mm) Carton Qty
335122 Welded Nut Plate M8/M10 100
PG0724
Item Code DescriptionPack
Qty
RAP01 500
RAP02 500
RAP12 200
PG0724
Item Code Description Carton Qty
AS06035R 50
AS06035RM12 50
AS06035S 100
016708 1
016707 1
016709 1
921556 1
Elect.l Mech. Services Pk (200 x DSF12 + set tool)
AnkaScrewTM
ROD 6 x 35mm M10
AnkaScrewTM
STUD 6 x 35mm M8
Hex Impact Socket (long) 13mm for AS06035R
Hex Impact Socket (long) 10mm for AS06035S
SDS 1/2" Drive Socket Adaptor for DD528
Elect.l Mech. Services Pk (500 x DSF10 + set tool)
Serv. Pk (500 x AS05030H + 5/16" mag nutsetter)
AnkaScrewTM
SUSPENSION SYSTEM
Hex Impact Socket (long) 15mm for AS06035RM12
AnkaScrewTM
ROD 6 x 35mm M12
HEAVY DUTY ANCHORING (Channel & Individual Mount) PACKS
Effective from December 31, 2010. 48
1300 780 063www.ramset.com.au
Effective from December 31, 2010. 49
1300 780 063www.ramset.com.au
TERMS & CONDITIONS OF SALE1. DEFINITIONIn these Terms and Conditions of Sales:“Supplier” means Ramset Fasteners Australia and Reid Construction Systems, divisions of ITW Ramset Australia Pty Ltd ABN 48 004 297 009;“Customers” means any person who has placed an Order with the Supplier or request a Quotation from the Supplier;“Goods” means any goods and/or services requested by the Customer in an order“Terms” means these terms and conditions2. SALE PRICESPrices of Goods shall be the then current price charged by the Supplier as at the date of delivery of the Good. Prices are subject to change without notice.3. GSTThe Customer must pay to the Supplier any amount, which the Supplier is required to pay on account of any GST as a consequence of any supply made or deemed to be made in connection with this agreement. The GST amount must be calculated at the prevailing rate of GST imposed by the government.4. SMALL ORDER SURCHAGEA minimum “Small Order Surcharge” may apply unless otherwise advised in writing.5. DELIVERY CHARGEAll deliveries will incur a minimum delivery charge of $10.6. AVAILABILITY OF STOCKDeliveries at any time are subject to availability of stock, and the Supplier will not be liable for any charges due to product unavailability. No responsibility will be accepted for delays outside the supplier’s control.7. CREDIT TERMSInvoices must be paid in full no later then 30 days after the last day of the month in which the invoice was issued.Accounts exceeding their limit will be suspended until the account is paid in full.All cash sales transactions must be paid in full before stock is supplied to customer.7.1 WARRANTY INFORMATIONPlease refer to Ramset standard warranty procedures for clarification on warranty and fair wear and tear.8. COLLECTION AND LEGAL FEESIf the Customers breaches these Terms, the Customer must pay any collection, commission and/or legal fees charged by any party to recover any money due.9. RETURN OF GOODS a) Goods will not normally be accepted for return after (14) days from date of delivery. b) Acceptance of Goods returned does not imply agreement to issue a credit note. c) A credit note will only be issued if the returned Goods are in original packs and found to be satisfactory by the Supplier in saleable condition. Delivery charge and small order surcharge will not be credited. d) Freight on returns will be at the Customer’s expense. e) Customers will be subject up to a 20% handling and restocking charge, except in the case of Supplier error, or defective goods. 10. RESERVATION OF TITLEThe Supplier whilst parting with possession of the Goods shall retain title to those Goods and title shall only pass to the Customer when full payment in cleared fund is received by the Supplier. Until this happens: a) the relationship between the Supplier and Customer is a fiduciary one b) the Customer holds the Goods as bailee for the Supplier c) the Customer shall not assign its rights, title or interest in any book debts arising in its favour in respect of its sale of GoodsThe customer is however obligated to pay the proceeds of sale into a separate account pending payment to the Supplier. Until payment in full the Customer is obliged to store the Goods separately pending sale and must keep separate records of sales of Goods owned by the Supplier. In default of payment, title is to remain with the Supplier who shall have the right to repossess the Goods without notice to the Customer and for this purpose the parties agree that the Supplier may enter the property of the Customer and recover the Goods. The right to enter is without prejudice to any other rights of the Supplier deriving from these Terms of the general law.In the event that the Customer uses the Goods in some manufacturing or construction purposes of its own or some third party, then the Customer shall hold such part of the proceeds of such manufacturing or construction process as relates to the Goods in trust for the Supplier. Such part shall be deemed to equal in dollar terms the amount owing by the Customer to the Supplier at the time of the receipt of such proceeds.11. LIABILITY OF THE SUPPLIER (a) The Supplier will not be liable in respect of any loss or damages (including consequential loss or damage), howsoever caused (whether by negligence or otherwise), which may be suffered or incurred or which may arise directly or indirectly in respect of the Goods, howsoever acquired where any person has: (i) modified or in any way altered the Goods or changed the formulation or make-up of the Goods; (ii) failed to use the Goods in accordance with the instructions or recommendations of the Supplier published from time to time in connection with the use of the Goods; (iii) failed to use the Goods in accordance with any applicable laws or regulations. (b) The Supplier will not be under any liability in respect of any loss or damage (Including consequential loss or damage) however caused (whether by negligence or other wise) which may be suffered or incurred or which may arise directly or indirectly in respect of any technical advice or assistance given or rendered by it to the Customer whether or not in connection with the manufacture, preparation or supply of Goods and/or Services to the Customer, provided that the Supplier has provided such technical advise or assistance with due care and skill. c) Where any applicable legislation implies any term, condition or warranty into the relationship between the Supplier and the Customer or into these Terms and Conditions of Sale or a contract of sale between the Supplier and the Customer in relation to the sale or supply of Goods/Services, or otherwise gives the Customer a particular remedy the Supplier and that legislation or any legislation avoids or prohibits provisions excluding or modifying the application of, or exercise of, or liability under, such term, condition, warranty or remedy, then that term, condition, warranty or remedy shall be deemed to be included in these Terms and Conditions of Sale, or, as the case may be, apply to that relationship. However, the Supplier’s liability for any breach of such term, condition or warranty or under such remedy, shall be limited, at the Supplier’s option, in any one or more of the ways permitted by that legislation including, where so permitted: (i) if the breach relates to any Goods, to: (A) the replacement of those Goods or the supply of equivalent goods; (B) the repair of those Goods; (C) the payment of the cost of replacing those Goods or acquiring equivalent goods; or (D) the payment of the cost of having those Goods repaired; and (ii) if the breach relates to any Services to: (A) the supply of those Service again; or (B) the payment of the cost of hiving those Service supplied again (d) If there is any inconsistency between the express terms of these Conditions and any term, condition, warranty or remedy deemed to be included in these Conditions pursuant to sub-clause 9(c), that term, condition, warranty or remedy shall prevail to the extent of the inconsistency, (e) The description, illustrations and other material contained in the catalogue, price list, brochure, leaflet or other material provided by or on behalf of the Supplier shall not form part of these Conditions or any contract between the Supplier and the Customer for the supply of Goods or Services and shall not amount to any representation or warranty (whether collateral thereto or otherwise), nor shall the use of such material constitute a contract of sale by description. All Goods and Services supplied by the Supplier shall be in conformity with the Supplier’s standard commercial specifications at the time of supply, subject to the Supplier’s right without notice to incorporate such minor modifications thereto as it thinks fit or any modifications of whatever nature necessary to comply with any relevant law.12. PROPERTY AND RISKRisk in Goods shall pass to the Customer immediately upon delivery of the Goods by the Supplier.13. ACKNOWLEDGEMENTSThe Customers acknowledges that: (a) it has not relied on any representations made by the Supplier as to the suitability of the Goods for any specific purpose; and (b) it is its responsibility to make its own enquiries and investigations as to the suitability of the Goods for any particular purpose.14. GOVERNING LAWThese Conditions shall be governed by and construed in accordance with the laws in force in the State of Victoria, and the Supplier and the Customer submit to the jurisdiction of the courts of that State.
For terms and conditions go to www.ramset.com.au ITW Construction Systems Australia Pty. Ltd. ABN 48 004 297 009 trading as Ramset™™Trademarks of Cetram Pty. Ltd. used under licence by Ramset™ FP FireFixTM is a trademark of Perelli Cables Clipsal® is a registered trademark of Clipsal Australia Pty. Ltd. © Copyright 2011 RAM/Pg12/2010
Sales, Orders and Enquiries
Tel: 1300 780 063Fax: 1300 780 064Email: enquiry@ramset.com.auWeb: www.ramset.com.au
HEAD OFFICE296-298 Maroondah HighwayMooroolbark, Victoria 3138Tel: 03 9726 6222
STATE BRANCHESVICTORIA5/71 Victoria Crescent, Abbotsford 3067296-298 Maroondah Highway, Mooroolbark 3138
SOUTH AUSTRALIA115 Sir Donald Bradman Drive, Hilton 5033
NEW SOUTH WALES71 Carnarvon Street, Silverwater 2128563 Gardeners Road, Mascot 20203/8 Channel Road, Mayfield West 2034
ACT5/19 Tennant Street, Fyshwick 2609
QUEENSLAND281 Montague Road, West End 4101153 Ingham Road, Townsville 4810
WESTERN AUSTRALIA1/12 Colin Jamieson Drive, Welshpool 6106
top related