quick reference card · 2019. 3. 5. · quick reference card please consult your spa user manual...

Description

Main functions

Quick Reference CardPleaseconsultyourspausermanualforcompleteinfoonthefeaturesofyourspasystem.

in.k600™Advanced series of full-function keypads that give complete control to wet fingers!

Aeware's®newseriesofkeypadsfeaturesahighprofilewithalargeLCDdisplay,menu-driveninterfacethatletuserseasilycontrolallin.xm™functionsandprogrammingdirectlyfromspaside,creatingatrueanduniqueuserexperience.

Pumpicons

Lockicon

Time,temperature&messages

Progressbaricon

MenutitleOperationMode

Informationdisplay

Statusicons

Lighticon

OKKey

NextKeygoestomenupage

ModeKeyselectsmodeofoperation:Spa,Audio,Options

RightMulti-functionKey

-Keydecreasespar-ametersetting

LeftMultifunctionKeygoesbackto

previousparametersettingorincreases

parametervalue

SoftKey1,2,3,4

+Keyincreasesparametersetting

Serviceicon

AM/PM(˚F/˚C)

• SelectSpatoviewSpamenu.

Starting Pump 1

• SelectPump 1toturnPump1on.•SelectPump 1repeatedly

tocontrolpump1speed.

(20minutebuilt-intimer)

Starting all accessories*

•PresstheQuick On/Offbuttontostartallaccessories(pumpsandturbines)inhighspeed.

•PresstheQuick On/Offbuttonagaintostopallaccessories(pumpsandturbines).Thereisanintegrated120minutetimer.

Light

•SelectLightkeytoturnlighton.•SelectLightkeyrepeatedlyto

controllightintensity.Afinalselectionturnslightoff.

(120minutebuilt-intimer)

Next menu page

•PressNext keytodisplaythenextpageinthespamenu.

Goestobloweroption

Thismenuallowscontrolofallpumps,blower,andspalight,aswellastheactivationoftheEconomyandStandbymodes.Animatediconsaredisplayedwhendevicesareon.AllpumpactivitycanbestoppedatoncebyactivatingtheStandbymode.

Starting Pump 2*

• SelectPump 2toturnPump2on.•SelectPump 2repeatedly

tocontrolpump2speed.

(20minutebuilt-intimer)

• PressModekeytodisplaythemodeSelectionwindow.

Starting Pump 3*

• SelectPump 3toturnPump3on.•SelectPump 3oncemore

toturnpump3off.

(20minutebuilt-intimer)

Water temperature settings

• PressPlus/Minuskeystoselectwatertemperaturesetting.

• PressOKorwait5secondstoconfirmnewsetting.The“SetPoint”promptindicatesthedesiredtemperatureNOTthecurrentwatertemperature.

*optionavailabledependinguponfactorysettings

Economy Mode

Lowersthetemperaturesetpointofthespaby20˚F(11˚C).

•SelectEconomy toactivatetheEconomymode.

•SelectEconomy againtoover-rideeconomyprogramming(seespasetupsection).

Standby Mode

Stopsallpumpsatthesametimebyasimpleclickofabutton!

•PressStandbytoactivate thismode.•PressStandbyagaintoresume

normaloperations.

SystemautomaticallyreturnstoNormalmodeafteracertainperiodoftime,unlesstheStandbymodehasbeenreactivated.SpalightwillflashforafewsecondsbeforetheexitofStandbymodeandrestartthepumps.The"Standby"messageisalsodisplayedduringStandbymode.

*Pumpwillstayturnedonifthere isarequestformoreheat.

Displaying time

• PressOKkeytodisplaythetime.•PressOKkeyasecondtimeto

gobacktowatertemperaturedisplay.

Viewing active progress bars

Aprogressbarisavisualindicatorofthetimeremainingbeforeadeviceisturnedoff.Onlyonebarisdisplayedatthetime.

•UseLeftorRightkeystovisualizetheprogressbarofeachactivateddevice.

Starting Blower*

•PressBlowertoturnBloweron.•PressBlower oncemoretoturn

bloweroff.

(20minutebuilt-intimer)

Programming

Setting filter cycle start time

Thedisplaywillshowthestartinghourpreviouslyset.

•Use(+)or(-)keytoselecthoursetting.

•UseRightkeytosetminutes.•Use(+)or(-)keytochange

minutes.•SelectNextarrowon

screenmenutogotothenextparameter:filtercycleduration.

Setting cycle duration

Herewesetavalueforthefiltercycleduration,inhoursandminutes.

•Use(+)or(-)keytosethour.•UseRightkeytosetminutes.•Use(+)or(-)keytochange

minutes.•SelectNextarrowonscreen

menutosavechangesandgotothenextparameter:filtercyclefrequency.

Setting filter cycle frequency

Herewesetthenumberoffilteringcyclesthatthesystemwillperfomperday.

•Use(+)or(-)keytoselectfrequencysetting.

•SelectEntertosavechangesandgobacktospaoptionsmainmenu.

Setting Economy mode*

•SelectEconomy

Programming the spa system

Toprogramthefiltercycle,youmustentertheseparameters:starttime,durationandfrequency.Duringafiltercycle,pumpsrunforoneminutetopurgetheplum-bing,thenPump1runsfortheprogrammednumberofhours.

•PressModekey•SelectOptionsmenu•SelectSpasub-menu•SelectFilteroption

Setting Economy start time

•SelectNextarrowtosavechangesandgotoeconomycyclestarthour.

•Use(+)or(-)keytosethoursetting.

•UseLeftkeytoaccessminutesoption.

•Use(+)or(-)keytosetminutes.•SelectNextarrowtosave

changesandgotothenextparameterstopeconomy.

Setting Economy stop time

•Use(+)or(-)keytosethour.•UseLeftkeytoaccessminutes

option.•Use(+)or(-)keytosetminutes.•SelectEnteroptiontosave

changesandgobacktospaoptionsmenu.

Setting maintenance reminder prompts

Thismenuallowsyoutoactivate/deactivateorsimplyresetthemaintenancereminderprompts.

•SelectReminder option

Turning reminders on/off*

•Use(+)or(-)keytoactivateordeactivateprompt(s).

•SelectNextarrowtosavechangesandgotonextmenuscreen.

Setting Economy status

•Use(+)keytoenabletheeconomymode,thedisplaywillshowOn.

•Use(-)keytodisableeconomymode,thedisplaywillshowOff.

*optionavailabledependinguponfactorysettings

Viewing spa warnings

Thewarningiconshowsuptopromptyoutoreviewactivewarningmessages.

Resetting prompt messages

•UseLeftorRightkeystoreviewonebyoneallactivemaintenancemessages.

•SelectEntertoresetmessageandviewnexttaskorgobacktomainmenu.

Spa warnings

Thismenuallowsyoutoviewallactivewarningmessagesi.e.hotwater.

•SelectWarningoption

Turning warnings on/off

•UseLeftorRightkeystoreviewallwarningmessages.

•PressModekeyagaintogobacktomainmenu.

Viewing spa reminders

Theremindericonwillshowupwhenyouhaveactivemaintenancemessages.

Setting the time

•PressModekey•SelectOptionsmenu•SelectClocksetting

Setting hour settings

•Use(+)or(-)keytosethour.•UseLeftorRightkeytoaccess

minutesoption.•Use(+)or(-)keytosetminutes.•SelectEntertogoback

tothekeypadmainmenu.

Setting keypad display options

Thissub-menuisusedtosetkeypaddisplaysettingssuchascontrast,backlight,etc.

•SelectDisplayoptions

Adjusting contrast

•UseLeftorRightkeystoadjustdesiredlevelofcontrast.

•SelectNextarrowondisplaytosavechangesandgotonextscreenmenu.

Adjusting backlight

•UseLeftorRightkeystoadjustbacklightbrightness.

•SelectNextarrowondisplaytosavechangesandgotonextscreenmenu.

Normal/Reverse display

•Use(+)or(-)keytoactivateordeactivatereversedisplay.

•SelectNextarrowondisplaytosavechangesandgotonextscreenmenu.

To program keypad settings

•PressModekey•SelectOptionsmenu•SelectKeypadsub-menu

Display orientation (inverting)

•Use(+)or(-)keytoactivateordeactivateinverteddisplay.

•SelectEnteroptiononscreenmenutobacktokeypadmainmenu.

Setting keypad audio options

Thissub-menuisusedtosetkeypadaudiooptionssuchas:keypadon(keybeep)andalarm.

•SelectSoundoptions

Keypad beep on/off

•Use(+)or(-)keytoactivateordeactivatethekeypadbeep.

•SelectNextarrowondisplaytosavechangesandgotonextscreenmenu.

Setting regional settings

Thissub-menuisusedtosetkeypadregionalsettingssuchaslanguage,temperaturedisplayunitsandformatfortimedisplay.

•SelectRegionaloptions

Alarm sound

•Use(+)or(-)keytoactivateordeactivatealarmsound.

•SelectEntertosavechangesandgobacktomainmenu.

Time setting

Other settings

Resetting keypad programmed values

•PressOKtoresetbacktodefaultfactoryvalues.

•SelectNextarrowondisplaytonextscreenmenu.

Viewing information about spa

SpasoftwareIDnumberandversionaredisplayed.

•SelectNextarrowondisplaytonextscreenmenu.

Viewing information on heater software

HeatersoftwareIDnumberandversionaredisplayed.

•SelectNextarrowondisplaytonextscreenmenu.

Viewing information on keypad software

KeypadsoftwareIDnumberandversionaredisplayed.

•SelectNextarrowondisplaytonextscreenmenu.

Upgrading keypad software

•UseOKkeytostarttheupgradeofthekeypadsoftware

•SelectEntertogobacktothekeypadmainmenuandcancelsoftwareupgrade.

Viewing information about the system

Toviewspaequipmentdataandkeypadsoftwareversion,andtoresetprogrammedsettingsandtoupgradekeypadsoftware.

•PressModekey•SelectOptionsmenu•SelectInfosub-menu

Language

•Use(+)or(-)toselectfrom:English,Français,Español&Deutsch

•SelectNextarrowondisplaytosavechangesandgotonextscreenmenu.

Temperature units

Watertemperaturecanbedisplayedin°For°C.

•Use(+)or(-)tochangesetting.•SelectNextarrowondisplay

tosavechangesandgotonextscreenmenu.

Time format

•Use(+)or(-)tochangesetting.•SelectEnteronthescreen

menutosavechangesandgobacktokeypadmainmenu.

Security options

Partialkeypadlock:basicfunc-tionsofthesparemainaccessible(pumpandlightoutputs),butitisimpossibletochangethetemperatureSetPoint,ortoenterprogrammingmode.Fulllock:allkeysaredisabled.Whenthekeypadislocked,theiconwillbedisplayed.

•SelectSecurityoptions

Partial keypad lockout

•Use(+)or(-)keytoselect"Partial".

•SelectEntertogobacktothekeypadmainmenu.

Tounlockthekeypad:•SelectModekey•PressandholdOptionkey

for5seconds

Full keypad lockout

•Use(+)or(-)keytoselect"Full".•SelectEntertogobackto

keypadmainmenu.

Tounlockthekeypad,pressandholdtheLightkeyfor5seconds.

System info

9919-100713-D Rev.06-2013 www.geckoalliance.com

©GroupeGeckoAllianceInc.,2013Alltrademarksorregisteredtrademarks

arethepropertyoftheirrespectiveowners.

PrintedinCanada06-2013