quick installation guide › images › i › a1a0vfk7tbs.pdfquick installation guide open a web...
Post on 06-Jul-2020
3 Views
Preview:
TRANSCRIPT
Quick Installation Guide
Open a web browser on the computer and configure the modem router according to the following main clues.
Via Web BrowserMethod 1
2. Configuring the Modem Router
1. Connecting the Hardware
7106505166 REV1.0.2
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router
Note: If you don’t need the phone service, just directly connect the ADSL port to the Phone Jack with a phone cable. Note: Please wait for 1-2 minutes until the ADSL LED is on.
Enter http://tplinkmodem.net or 192.168.1.1 in the address bar. Type in admin for both the user name and password and click OK.
Note: If the login window does not appear, please refer to FAQ->Q1.
Enter the parameters provided by your ISP and then click Next. Here we take PPPoE as an example.
a C
fed
Select Yes to auto detect your connection type and then click Next to continue.
b Choose Quick Setup in the main menu and then click Next to start the configuration. Select your Region and Time Zone from the drop-down list, and then click Next.
Click Next to continue.
Wireless Network Name:
Password:
TP-LINK_XXGHz_XXXXXX
XXXXXXXX
Quick Setup-Wireless 2.4GHz & 5GHz
Back Next
Channel:Mode:
Security:
Note: You may rename your 2.4GHz/ 5GHz wireless network name and create your own password.
Back Next
XXXXXXXXXXXX
XXXXXX
Quick Setup-PPPoE
DSL PVC:
Auto-detection has succeeded!
8/35Encapsulation Mode: LLC
Connection Type: PPPoE
Username:
Password:Confirm Password:
Click Save and wait for your settings to take effect. Click Finish to complete the setup.
Finish
Quick Setup-Complete
Operation Mode Configuring: Success
WAN Connection Configuring: Success
Gateway and DNS Configuring: Success
Wireless Configuring: Success
Time Zone Configuring: Success
Region
Back Next
Quick Setup-Region and Time Zone
XXXXXX
XXXXXXXXXXTime Zone
Back Next
Quick Setup-Auto Detection
Yes.
No. I want to configure the Internet connection myself.
Auto-Detect Connection Type:
Enjoy!
Now your wired and wireless devices can connect to the Internet !
Connect the splitter, computer and power adapter as follows. Then turn on the modem router. Check the following LED lights to ensure the hardware connection is correct.1 2
Power On On
ADSLOnLAN
Splitter
Phone Jack
USB 3.0ADSL POWERPOWERON/OFFWPS WiFi
ON/OFFLAN1 LAN2 LAN3 LAN4/WAN
Wired
Connect your computer to the modem router (Wired or Wireless).
Or
Wireless
1
Ethernet cable
Connect wirelessly by using the default network name (SSID) and password on the product label printed on the bottom of the modem router.
USB 3.0 POWERPOWERON/OFFLAN1 LAN2 LAN3 LAN4/WAN
Model:Archer D9 ver:1.0S/No.:XXXXXXXXXXXXX
MAC:XXXXXXXXXXXX
Wireless Password /PIN
2
Login
http://tplinkmodem.net
admin
admin
Name Status Indication
Note: If you are using a computer that cannot run the mini CD, please refer to Method 1 for configuration.
Via CD Setup WizardMethod 2
The USB 2.0&3.0 ports can be used for media sharing, storage sharing and print sharing across your local network. You can also set up the FTP server to access your files remotely by connecting to the Internet.
Note: To learn more about the USB features, please visit
http://tp-link.com/app/usb, retrieve Resource CD or simply
scan the QR code.
USB 2.0&3.0 sharing ports
locates on the side panel
Remote Access via FTP Server
Media Sharing
Local Storage Sharing
USB 2.0
Printer Sharing
Frequently Asked Questions (FAQ)
LED Indicators
Note: If the main page does not display on your computer, browse the files on the CD and double click Autorun.exe.
Choose your language and select Archer D9. Then click Start Setup.The Easy Setup Assistant will guide you through the setup process.
Insert the TP-LINK Resource CD into the CD-ROM drive.
Click FINISH to complete the setup.
USB Features
Archer D9
Start Setup
User Guide
Printer Sharing Setup
Browse CD EXIT
Choose your language:
English
Enjoy!Now your wired and wireless devices can connect to the Internet !
FINISH
Welcome
Install ADSL Device
Configure ADSL Device
Confirm Settings
Congratulations!
Q1. What can I do if the login window does not appear?A1. If the computer is set to a static or fixed IP address, change it to obtain an IP address
automatically.A2. Verify http://tplinkmodem.net or 192.168.1.1 is correctly entered in the web browser
and press Enter.A3. Use another web browser and try again.A4. Reboot your modem router and try again.A5. Disable the network adapter used currently and then enable it again.
Q2. What can I do if I cannot access the Internet?A1. Check your cables and make sure they are all plugged in correctly, including the
telephone line, Ethernet cables and power adapter.A2. Check to see if you can log on to the Web-Management page of the modem router.
The default address of the Web-Management page is http://tplinkmodem.net or 192.168.1.1. If you can, try the following steps. (If you can not, please set your computer to obtain an IP address automatically and then try to access the Internet again.)
A3. Consult your ISP and make sure all the VPI/VCI, Connection Type, account username and password are correct. If they are not, please replace them with the correct settings and try again.
A4. If you still cannot access the Internet, please restore your modem router to its factory default settings and reconfigure your modem router following the instructions in this QIG.
A5. Please contact our Technical Support if the problem still exists.
A1. With the modem router powered on, press and hold down the RESET Button on the side panel of the modem router for approximately 8 seconds.
Q3. How do I restore the modem router to its factory default settings?
RESET Button Press & Hold 8 seconds
A2. Log on to Web Management page of the modem router, and go to System Tools->Factory Defaults,
click Restore, then wait until the progress bar loading finished.
Q4. What can I do if I forget my password?Web Management page password:
Restore the modem router to its factory default settings and then use the default User Name ‘admin’ and Password ‘admin’ to log in.
Wireless Network password:
A1.The factory default password can be found on the product label printed on the back of the modem router.
Note: If your questions are not answered here, please refer to http://www.tp-link.com/en/support/faq and click Contact Technical Support for further assistance.
A2. If you have changed your password, log on to the modem router’s Web Management page, go to Wireless>Wireless Security to obtain or reset your password.
Off
Off
Power is off.
System start-up complete.
(USB)
(LAN)
(WPS)
(Internet)
(Wireless2.4GHz)
(Power)On
System starting up or device updating.Flashing
On
Off
On
On/Off
The wireless 2.4GHz band is disabled.
Slow Flash
No USB device is plugged in.
The inserted USB device is identified and ready to use.Flash A new USB device is being identified.
The wireless 2.4GHz band is working properly.
OffOn
No LAN port is connected.At least one LAN port is connected .
A wireless device is trying to connect to the network via WPS. This process may take up to 2 minutes.
It turns on when a wireless device has been successfully connected to the network via WPS. After about 5 minutes, the WPS LED will turn off.
Off(Wireless5GHz)
OnThe wireless 5GHz band is disabled.The wireless 5GHz band is working properly.
On(ADSL) Flashing
OffThe ADSL negotiation is in progress.
ADSL synchronization fails.
ADSL line is synchronized and ready to use.
OffOn
There is no successful Internet connection or the modem router is operating in Bridge mode.
The network is available with a successful Internet connection.
a b c
After connecting to the Internet via Web Browser or via CD Setup Wizard,TP-LINK's Tether App lets you manage the modem router on smart devices. You can:
View the information about clients.
Use Parental Control to limit kid's access to the Internet. Block or Unblock client's access to the Internet.
Configure some basic settings for the modem router.
Tether App
Scan the QR code and download the TP-LINK Tether App from App Store or Google Play.
1
23
Ensure your smart device is wirelessly connected to the modem router.
Launch the Tether App, and enjoy the easy management of the modem router.
Then, how to start?
©2015 TP-LINK
top related