protection solutions - esi · oil p cement p greasy stains p general stains p organic growth p...
Post on 13-Oct-2020
2 Views
Preview:
TRANSCRIPT
...applied excellence
Protection Solutions
...applied excellence
How It Works.
The majority of building substrates are naturally porous, allowing water to penetrate, which can carry pollution/stains, propagate organic growth and create the damaging effects of frost and humidity.
The unique properties of Nu-Cryl will alter the chemical structure of a porous building substrate, which in turn will provide oil and water repellent properties. The appearance of the substrate will not change and will remain moisture vapour permeable.
Nu-Cryl treatment is achieved by impregnating to full saturation. The Nu-Cryl solution will penetrate deep into the material’s pores rendering it water repellent.
The Nu-Cryl range of environmentally friendly products will protect against water, oil, stains, pollution, graffiti, organic growth and chewing gum.
Protection Solutions
Page Number 3 4 5 6 7 8 8 9 9 10 10 11 11 11Substrates
Concrete P P P P P P P P P P PBrickwork P P P P P P P P P P P PSandstone P P P P P P P P P P P PLimestone P P P P P P P P P P P P
Cement P P P P P P P P P P P PTerracotta P P P P P P P P P P P P
Marble P P P P P P P P P P P PGranite P P P P P P P P P P P P
Slate P P P P P P P P P P P P
Properties
Oil & Water Repellent P P P PGraffiti Resistant P PFloor Protection P P P
Wall / Roof Protection P P P P PWeather Resistant P P P P P
Stain Resistant P P P P PWater Based P P P P P
Chewing Gum Repellent P PFloors P P P P P
Oil PCement P P
Greasy Stains PGeneral Stains P
Organic Growth P PChewing Gum Remover P
Graffiti Remover P P P
Nu-Cry
l WRS
Nu-Cry
l WRS
Extra
Nu-Cry
l WRS
Col
our E
nhance
r
Nu-Cry
l A.G
.Nu-
Cryl A
.G. E
xtra
SS1-
Ster
ilisin
g Solu
tion
MC1-
Mul
ti Cle
anBC
2-Br
ick C
lean
er
OD1-Oil D
isper
sant
CM1-
Cemen
t & M
orta
r Cle
aner
CG1-Chew
ing G
um R
emov
er
AG 4-Gel
Gra
ffiti
Rem
over
SL1-
Shad
ow lif
ter
SL1-
Shad
ow LI
fting Po
ultic
e
...applied excellence2
ProductSelector
...applied excellence
NU-CRYL® W.R.S.
Prevents Frost Damage
Prevents Organic Growth
Does Not Affect Original Colour
Stain And Dirt Resistant
Solvent Free
NU-CRYL® WRS is suitable for porous walls and facades preventing frost damage and organic growth.
NU-CRYL® WRS also protects against soiling and the effects of acid rain
Surfaces treated with NU-CRYL® WRS will remain cleaner longer, therefore reducing maintenance costs.
Untreated Limestone
Treated Limestone
COLOUR RANGE: Clear, invisible.
PACK SIZE: 5 L & 25 L Drums.
DRYING TIME: Touch dry:…..4 hours. Waterproof:..24-48 hours.
APPLICATION: Impregnation to be applied by flood-coating method using low-pressure spray equipment of the knapsack type, or by brush/roller. Application should be to full saturation commencing at the bottom and working upwards. Only one application required on masonry, brickwork etc. Do not apply at temperatures below 5°C.
ENVIRONMENT: REACH Compliant Water-Based Protective Solution.
A unique acrylic oil and water repellent treatment for concrete, stone and masonry walls and façades.
Key Product Information
Oil and Water RepellentTo BS 6477:1992
Protection Solutions
3
...applied excellence
Untreated Block
Treated Block
Protection SolutionsNU-CRYL® WRS EXTRA
Prevents Frost Damage
Prevents Organic Growth
Does Not Affect Original Colour
Stain And Dirt Resistant
Solvent Free
NU-CRYL® WRS EXTRA is suitable for application to dense flooring substrates such as pedestrian areas, car parks and paving which is subjected to heavy wear and staining. NU-CRYL® WRS EXTRA will resist oil penetration and creates a non-stick surface that allows easy removal of chewing gum
Paving treated with NU-CRYL® WRS EXTRA will remain cleaner longer with the regular cleaning process drastically reduced.
COLOUR RANGE: Clear, invisible.
PACK SIZE: 5 L & 25 L Drums.
DRYING TIME: Touch dry:…..2 hours. Waterproof:..24 hours.
APPLICATION: Impregnation to be applied by flood-coating method using low-pressure spray equipment of the knapsack type, or by brush/roller. Application should be to full saturation commencing at the bottom and working upwards. Only one application required on masonry, brickwork etc. Do not apply at temperatures below 5°C.
ENVIRONMENT: REACH Compliant Water-Based Protective Solution.
A unique acrylic oil and water repellent treatment for floors.
Key Product Information
Oil and Water Repellent To BS 6477:1992
4...applied excellence
...applied excellence
NU-CRYL® WRS Colour Enhancer
Prevents Frost Damage
Prevents Organic Growth
Enhances The Natural Colour Of The Substrate
Stain And Dirt Resistant
Solvent Free
NU-CRYL® WRS Colour Enhancer is suitable for application to walls and floors such as blockwork, concrete, natural stone, reconstructed stone & blockwork, granite, marble and terrazzo. Due to its excellent water repellent qualities, NU-CRYL® WRS Colour Enhancer will reduce the penetration of oil and water into the substrate as well as protecting from frost damage and organic growth. Stain and dirt resistant, NU-CRYL® WRS Colour Enhancer also enhances the natural colour of the substrate.
Areas treated with NU-CRYL® WRS Colour Enhancer will remain cleaner longer with the regular cleaning process drastically reduced..
COLOUR RANGE: Clear, invisible.
PACK SIZE: 5 L & 25 L Drums.
DRYING TIME: Touch dry:…..4 hours. Waterproof:..24-48 hours.
APPLICATION: Impregnation to be applied by flood-coating method using low-pressure spray equipment of the knapsack type, or by brush/roller. The surface to be treated should be impregnated with 2 coats (wet on wet). Do not apply at temperatures below 5°C.
ENVIRONMENT: REACH Compliant Water-Based Protective Solution.
A unique water based acrylic copolymer oil and water repellent treatment that also enhances the natural colour of the substrate.
Key Product Information
Protection Solutions
Oil and Water Repellent To BS 6477:1992
4...applied excellence
5
...applied excellence...applied excellence ...applied excellence
Protection SolutionsNU-CRYL® AG
Moisture Vapour Permeable
Gives Up To 15 Years
Protection
No Colour Change
Solvent Free
Nu-Cryl® AG is an acrylic-based impregnation coating for exterior surfaces. Applied by brush or airless spray it provides protection against solvents, chemicals, grease, oil, dirt and weather damage while still allowing the substrate to ‘breathe’. Nu-Cryl® AG will not noticeably change the surface appearance and graffiti can be effectively removed using a low pressure hot wash. No reapplication of Nu-Cryl® AG is necessary.
Key Product Information
COLOUR RANGE: Clear, invisible.
PACK SIZE: 5 L & 25 L Drums.
DRYING TIME: Touch dry:…..4 hours. Waterproof:..24-48 hours.
APPLICATION: Impregnation to be applied by flood-coating method using low-pressure spray equipment of the knapsack type, or by brush/roller. Application should be to full saturation commencing at the bottom and work ing upwards. Only one application required on masonry, brickwork etc. Do not apply at temperatures below 5°C.
ENVIRONMENT: REACH Compliant Water-Based Protective Solution.
Economical clear anti graffiti protection for porous substrates such as Brick, Natural Stone, Reconstructed Stone, Block Work and Concrete.
Anti-Graffiti Protection
6
...applied excellence...applied excellence ...applied excellence
NU-CRYL® AG EXTRA
Moisture Vapour Permeable
Gives up to 15 years Protection
No Colour Change
Solvent Free
Nu- Cr yl® AG Ex tra is an acr yl ic-based impregnation coating for exterior surfaces. Applied by brush or air-less spray it provides protection against solvents, chemicals, grease, oil, dirt and weather damage while still allowing the substrate to ‘breathe’. Nu-Cryl® AG Extra will not noticeably change the surface appearance and graffiti can be effectively removed using a low pressure hot wash. No reapplication of Nu-Cryl® AG Extra is necessary.
Key Product Information
COLOUR RANGE: Clear, invisible.
PACK SIZE: 5 L & 25 L Drums.
DRYING TIME: Touch dry:…..2 hours. Waterproof:..24 hours.
APPLICATION: Application by low pressure spray or by brush/roller taking care to avoid any sagging. Application on vertical surfaces should be to full saturation commencing at the bottom and working upwards. Only one application is required Do not apply at temperatures below 5°C..
ENVIRONMENT: REACH Compliant Water-Based Protective Solution.
Economical clear anti graffiti protection for dense substrates such as Granite, Marble, Terrazzo and Polished Concrete.
Anti-Graffiti Protection
Protection Solutions
7
...applied excellence...applied excellence
Before After
OD1 Oil Dispersant
MC1 Multi Clean
Solvent Free
Non-Caustic
Non-Flammable
Safe On Tarmac And Asphalt
May Be Diluted With Water For Light Stains
Degreases Paving
A safe, ecological, water solubleoil dispersant and emulsifier.
Removes staining and grime from brick, concrete and other
hard surfaces.
Application:
Can be used as supplied for heavy contamination or diluted with 4 parts water when used through hot water pressure washers. Allow to dwell for up to 5 minutes and pressure wash with clean water. For washing down paintwork dilute with 40 parts water depending on the staining to be removed, for extra effectiveness use hot water.
MC1 is a water soluble degreaser formulated to remove grease staining and general grime from paved surfaces and other hard surfaces. Can also be used for cleaning prefabricated buildings and paintwork.
OD1 Oil Dispersant is safer and ecologically more acceptable than many other degreasers available and is suitable for use on most surfaces such as concrete, brick, tarmac, metals, plastics and painted surfaces.
Application:
Can be used as supplied for heavy contamination or diluted with up to 5 parts water for light use. Use a low pressure spray directly on the spillage and allow to dwell for 10-20 minutes. Hose or pressure wash off, leaving surface clean.
Protection Solutions
...applied excellence8
Before After
...applied excellence...applied excellence
Application:
Apply BC2 undiluted with a bristle brush to the affected area. And allow to dwell for 15-20 minutes. Pressure wash off leaving surfaces clean. It may be necessary to degrease the area prior to cleaning with MC1-Multi Clean.
Application:
Pre-wet surfaces to be treated prior to application and apply CM1 undiluted with a bristle brush to the affected area. Allow to dwell for 15 minutes. Pressure wash off leaving surface clean.
Before After
BC2 - THICK BRICK CLEANER
CM1 - CEMENT AND MORTAR CLEANER
Will Remove Heavy Grime DepositsFrom Sandstone And Brick
Will Cling To Vertical Surfaces Allowing Longer Dwell Time
Ideal For New Build Projects
May Be Diluted With Water
A strong acidic liquid specifically formulated to remove heavy grime deposits from sandstone and brick.
An acidic liquid formulated specifically for removing cement
and mortar stains from walls and floors.
BC2 is a thixotropic brick and stone cleaner developed for the removal of heavy staining on aged substrates.
CM1 is an acidic cleaner developed for the removal of Cement an Mortar spillages and staining, particularly on new build projects. Suitable for use on hard landscaping and paving.
Protection Solutions
9
Growth On Pebble-Dash Growth On Brick
SS1 - STERILISING SOLUTION
CG1 – CHEWING GUM REMOVER
Kills Spores Of Mould And Algae
Reduces Re-Growth
Environmentally Friendly
Non-Toxic Low Odour
Environmentally Friendly
A specially prepared, ready to use wash for use before applying
protective treatments.
A specially formulated non-aqueous blend of citrus
oils which combine to provide a very high performance chemical for the removal
of chewing gum and other stubborn stains.
CG1 is completely non-toxic, with a pleasant odour making it extremely safe for use internally as well as externally.
SS1 is a ready to use, water based biocide that will destroy mould, fungi and organic growth. SS1 is an environmentally friendly waterborne formulation. The use of SS1 will reduce regrowth and is suitable for application to roofs,walls and paving.
Application:
Remove heavy deposits of mould or algae by power washing. Spray-apply SS1 to all areas to kill any remaining spores. Leave for 24 hours prior to applying any protective treatment.
Application:
Spray directly onto the chewing gum and allow to dwell for up to 5 minutes. Power wash with hot water to remove the gum spots followed by complete rinsing of the surface to create a uniform appearance.
Protection Solutions
...applied excellence10
...applied excellence
AG4 Applied SL1 Being Applied BeforeAfter After After
Will effectively remove aerosol graffiti, permanent marker pen, crayon and lipstick from more porous surfaces such as brickwork and concrete. The extended dwell-time allows effective penetration of porous surfaces and restricts evaporation of solvents which cause unpleasant odours.
Will effectively remove permanent marker, crayon & lipstick from porous surfaces such as brickwork & concrete. The extended dwell-time allows effective penetration of the surface and restricts evaporation of solvents, which causes unpleasant odours
AG4 - GEL GRAFFITI REMOVERSL2 - SHADOW
LIFTING POULTICESL1 - SHADOW LIFTER
Will Cling To Vertical Surfaces Allowing ALonger Dwell Time
Effective On Porous Surfaces
Effective On Porous Surfaces
Removes Old MarkerPen Shadows
A specially formulated blend of solvents and
biodegradable detergents developed to remove
graffiti from porous or extensively vandalised surfaces where a longer ‘dwell time’ is required.
A specially formulated alkaline cleaner for the
removal of stubborn graffiti shadows from
brickwork, stone and concrete.
A specially formulated poultice cleaner for the
removal of stubborn graffiti shadows from
brickwork, stone and concrete.
Application:
Apply SL1 undiluted with a bristle brush to the affected area and allow to dwell for up to 2 minutes. Remove by pressure washing to leave surfaces clean.
Application:
Apply AG4 Gel liberally to the graffiti using a bristle brush. Allow to dwell for 2-3 minutes. Remove by power washing with hot water.
Application: Apply the mixed SL2 Poultice to the affected area at a thickness of 5-10 mm. Cover with plastic and tape the edges. Allow the poultice to dry for about 24 hours. Remove the plastic and poultice from the stain and thoroughly rinse with hot water under low pressure.
No Colour Change
Effective On Porous Surfaces
Removes Old Marker Pen Shadows
Removes Old Aerosol Shadows
Wil l ef fect ively remove unsightly shadows remaining after graffiti removal. Will also remove soiling and staining from brickwork.
Protection Solutions
...applied excellence11
ProfessionalApplication
How To Order
Pioneers in the field of specialist protective coatings, HYDRON’S track record of success is a direct result of listening to our customers and satisfying their requirements from our industry leading range of products and services. As an ISO 9001 approved company, we supply to many major companies and service all types of industry as well as local and central government throughout the U.K. Our reputation has been built on our ability to provide solutions, our depth of technical expertise and the strength of our commitment to customer service.
Approved Applicators:The HYDRON range of coating systems are applied by approved applicators, giving the specifier the benefit of proven products applied professionally.
With offices in both the UK and Ireland, no minimum order value and next day delivery from stock for all orders placed before noon, we make the process of ordering these market leading protective coatings and cleaning solutions as easy as possible.
Ordering Is Simple...
UK Office:
Call Your Order To: 01902 450950Or
Fax Your Order To: 01902 451050Or
Post Your Order To:Hydron Protective Coatings Ltd,
Unit 7 Phoenix Road, Wednesfield, WolverhamptonWV11 3PX, England.
OrEmail Your Order To: enquiries@hydronpc.co.uk
Ireland Office:
Call Your Order To: 046 956 7516Or
Fax Your Order To: 046 956 7542Or
Post Your Order To:Hydron Protective Coatings (Ireland) Ltd,
2 An Gleib, Ballivor, Co. Meath, IrelandOr
Email Your Order To: enquiries@hydron.ie
www.hydronpc.co.uk
Certificate No. 20494
top related