protecting life, environment and property... 1 system build-up id: avoice_system_buildup_eng,...
Post on 22-Jan-2016
216 Views
Preview:
TRANSCRIPT
1
Protecting life, environment and property...
System build-upSystem build-up
ID: AVOICE_System_BuildUp_Eng, 07-2003
2
Protecting life, environment and property...
Operator panels BR-210Operator panels BR-210
• Standard zone selection w/max 14 zones or zone groups• Built-in swan-neck microphone• Max. 32 panels per system• Max 750 metres cable from central to operator panel
3
Protecting life, environment and property...
Versions of Operator panel BR-210Versions of Operator panel BR-210
3 versions of BR-210:• BR-210/A: BS-100 design with 14 zone groups• BR-210/01: AutroSafe design with 14 zone groups• BR-210/02: AutroSafe design with 6 zone groups
4
Protecting life, environment and property...
Build-up: PA rack Build-up: PA rack
• The PA rack is module based• This means that certain ”rules” must be followed to get a
correct system• We will now and through the build-up of such a rack
5
Protecting life, environment and property...
cont. Build-up: PA rackcont. Build-up: PA rack
1. Calculate loudspeakers• When the loudspeakers are calculated and distributed on loudspeaker
lines, you have enough information to calculate Amplifiers.• A good rule: Calculate all loudspeaker tappings and add about 50% to the
amplifier capacity• In example:
20 horn speakers, indoor type BBR-MR10A/T à 3W = 60W3 horn speakers, outdoor type BBR-MR10A/T à 5W = 15W60 ceiling speakers type BBR-BK560/T à 1,5W = 90WTotal 165W+ 50% of 165 = 82,5W247,5W
6
Protecting life, environment and property...
2. Amplifiers...
• BO-50: Booster amplifier, 50W• BO-100: Booster amplifier, 100W• BO-150: Booster amplifier, 150W• BO-250: Booster amplifier, 250W• Booster amplifiers are placed in separate ”cassettes”,
height: 2U.
cont. Build-up: PA rackcont. Build-up: PA rack
7
Protecting life, environment and property...
3. Cassette for placement of modules…• MC-03: Cassette for 8 (9) module spots
Height: 3U.
cont. Build-up: PA rackcont. Build-up: PA rack
8
Protecting life, environment and property...
4. Insert modules....• APS-99: CPU unit
1 pc. must always be included• APS-52: Input-unit
1 pc. must always be included• APS-53: Input-unit 24V
For sectioning of up to 4 zones• APS-55: Control-unit
1 pc. must always be included Used together with APS-52 Note: Takes up 2 module spots
• APS-75: Relay output-unit. At least 1 pc. must always be included. 4 relay outputs (programmable)
cont. Build-up: PA rackcont. Build-up: PA rack
9
Protecting life, environment and property...
4. Cont. Insert modules.... • APS-07: Chime-unit
1 pc. APS-07 or APS-08 must be included if you require chime signal before message
• APS-16: Input-unit for Operator panel/ digital microphones Max. 32 panels /mic.’s per. APS-161 pc. Per system if panel and/or dig. mic is included
• APS-24: Text store-unit. 1 pc. must be included
with 99 Pre-recorded messagesNote: Takes up 3 module spots
cont. Build-up: PA rackcont. Build-up: PA rack
10
Protecting life, environment and property...
4. Cont. Insert modules.... • APS-62: Output unit for loudspeaker lines
Output for 2 loudspeaker linesNote: Max. 150W can be connected this unit
• APS-64: Output unit for loudspeaker linesOutput for 4 loudspeaker linesNote: Max. 150W can be connected this unitNote: Takes up 2 module spots
cont. Build-up: PA rackcont. Build-up: PA rack
11
Protecting life, environment and property...
4. Cont. Insert modules.... • APS-77: Monitoring unit CPU
Controls monitoring of all unitsMin. 1 pc. per cassette containing APS-78 and/or APS-79
• APS-78: Monitoring unit for loudspeaker linesProgrammable sensitivityMin. 1 pc. per 4. loudspeaker lines
• APS-79: Monitoring unit for amplifiersProgrammable sensitivityMin. 1 pc. per 2 amplifiers
cont. Build-up: PA rackcont. Build-up: PA rack
12
Protecting life, environment and property...
4. Cont. Insert modules.... • APS-90: Internal Power Supply
Used on systems with few amplifiers and many modulesGives 900mAUsually 1 pc. when only 1 amplifier connected
• APS-59: Communication unitUsed to connect central in a decentralised system.Can connect up to 16 centrals in a system Only 1 system cable necessary.
cont. Build-up: PA rackcont. Build-up: PA rack
13
Protecting life, environment and property...
4. Cont. Insert modules• APS-01: Input unit for Mic./AUX• APS-02: Input unit for music sources (i.e. CD) • APS-40: Input-/switch unit for up to 4 music sources
Used for connecting more than 1 music source to a system
2 inputs for external sound sources, 2 inputs for internal sound sources If more than 2 external sound sources is
required, APS-01 unit is needed in addition.
cont. Build-up: PA rackcont. Build-up: PA rack
14
Protecting life, environment and property...
4. Cont. Insert modules• APS-21: Cassette player- unit, single• APS-22: Cassette player - unit, double• APS-25: FM radio-unit
Programmable 32 channels.
We usually use an external CD player or CD changer
cont. Build-up: PA rackcont. Build-up: PA rack
15
Protecting life, environment and property...
Paging MicrophonesPaging Microphones
• APS-308: Microphone with 8 buttons
7 programmable• APS-316: Microphone with 16
buttons 15 programmable
• APS-364: Microphone with 64 buttons
63 programmable
16
Protecting life, environment and property...
Paging microphone APS-388Paging microphone APS-388
• Alphanumeric display• 128 programmable functions• 5 extra function buttons
• Key switch• “Covered” alarm button• Start/stop cd player• Start/stop announcement machine• Start pre recorded messages• Etc.
17
Protecting life, environment and property...
APS technology ARC technology
Remote control unitsRemote control units
18
Protecting life, environment and property...
Cable descriptionCable description
• GZ-928: System cable from the PA manufacturer Rather economicUsed from PA rack to operator-
panels/microphone• Usually 6 pairs of signal cable is needed between the Fire
Alarm Central and the PA rack• Loudspeaker cable:
In the handbook for BR-200 a table is presented. This states type of Loudspeaker cable, and dimensions
top related