product overviewf...part no: pe-091-13mu 1/4 electric wiring kit for towbars / 13-pin / 12 volt /...

Part No: PE-091-13MU

1/4

Electric wiring kit for towbars / 13-pin / 12 Volt / ISO 11446

Product overview

This electric kit has to be installed by a professional workshop or a suitable qualified person.The installation instructions must have been read and fully understood before the start of any installation. Please contact your wiring kit provider or the hotline shown in the footer should you need assistance!Make sure the vehicle is approved/homologated by the manufacturer to tow a trailer! Also please check that there is a definite compatibility between this vehicle and the electric kit!Following the installation of the electric kit, the fitting instructions should be kept together with the vehicle service document and vehicle handbook. The fitting instructions contain important information relating to the use and function of the towing kit as well as for any diagnostic or activation process, that might have to be repeated in the future (e.g. after the performance of a vehicle software update).All warranty claims will be forfeited if the electric kit or components contained therein are used incorrectly or modified. If a towing socket adaptor has been used to connect to the trailer or bike rack, this must be removed from the trailer socket once the trailer or bike rack has been disconnected.If the trailer or bike rack is not equipped with a rear fog lamp, depending on the towing vehicle type, the correct function of the towing kit cannot be guaranteed. In such cases, a rear fog lamp should be retro fitted.This towing electric kit will not be covered under warranty if any technical or electrical modifications or software updates have been performed by the vehicle manufacturer after the initial commissioning of the kit. That applies especially to modifications or updates which may cause malfunctions in the trailer socket or any other part of the trailer electrical equipment!Depending on the type of trailer module used in this electric kit, diagnostic interrogation with the vehicle’s electrical system may be limited or will not function. The error memory inside the trailer module may not be able to be accessed by vehicle manufacturers diagnostic system.Error logs relating to the trailer electrical equipment, that may be generated in the vehicle manufacturers diagnostic system as a result of a test procedure, may be due to the incorrect installation of the towing electric kit or the false activation of the trailer module.We always recommend whenever possible, the following troubleshooting process: An analysis of the vehicle’s error memory and possibly clearing of all faults before the start of the installation! Try disconnecting the trailer module from the towing harness and re-start the fault clearing process! If in doubt, limit the time for troubleshooting to a max of 0,5 hours and call our Technical Support Team!Please follow our instructions carefully and always test the towing electrics using a true lighting board or a specifically designed bulb tester. If an LED tester is used, ensure it is equipped with correct load resistors or malfunctions will occur! This instruction is subject to changes and we reserve the right to make changes to design, colour etc. All of the data and illustrations may not be an exact representation but the text contained in this instruction must be observed!

ukts@ecs-electronics.com

www.ecs-electronicsuk.co.u

k

Revision: 4 / 19.01.2021PE-091-13MU

ECS Electronics UK20 Speedwell Close Hun�ngtonChester, CH3 6DX

Email-sales: uksales@ecs-elecrtronics.comEmail-technical: ukts@ecs-electronics.com

SALE: +44 (0) 7590 564639TECHNICAL: +44 (0) 7440 202052WEB: www.ecs-electronicsuk.co.uk

CITROEN

PEUGEOT

CampsterDispatchë-Dispatch Space TourerË-Space TourerVanster

01/2020 >>07/2016 >>10/2020 >>07/2016 >>10/2020 >>01/2020 >>

Travellere-TravellerExperte-Expert

07/2016 >>10/2020 >>07/2016 >>10/2020 >>

VAUXHALL

TOYOTA

Vivaro CVivaro-eVivaro LifeVivaro-e Life

08/2019 >>10/2020 >>08/2019 >>10/2020 >>

ProaceProace VersoProace ElectricProace Verso Electric

02/2016 >>02/2016 >>10/2020 >>10/2020 >>

2/4

4x

15x

OPTION +15

Extension kitSP-135-ZZ

3x3x 1x3x 3x

2x 20 Amp.

20 Amp.

1x 15 Amp.

15 Amp.

1x

Part No: **-***-***

Electric wiring kit for towbars / 13-pin / 12 Volt / ISO 11446

This electric kit has to be installed by a professional workshop or a suitable qualified person.The installation instructions must have been read and fully understood before the start of any installation. Please contact your wiring kit provider or the hotline shown in the footer should you need assistance!Make sure the vehicle is approved/homologated by the manufacturer to tow a trailer! Also please check that there is a definite compatibility between this vehicle and the electric kit!Following the installation of the electric kit, the fitting instructions should be kept together with the vehicle service document and vehicle handbook. The fitting instructions contain important information relating to the use and function of the towing kit as well as for any diagnostic or activation process, that might have to be repeated in the future (e.g. after the performance of a vehicle software update).All warranty claims will be forfeited if the electric kit or components contained therein are used incorrectly or modified. If a towing socket adaptor has been used to connect to the trailer or bike rack, this must be removed from the trailer socket once the trailer or bike rack has been disconnected.If the trailer or bike rack is not equipped with a rear fog lamp, depending on the towing vehicle type, the correct function of the towing kit cannot be guaranteed. In such cases, a rear fog lamp should be retro fitted.This towing electric kit will not be covered under warranty if any technical or electrical modifications or software updates have been performed by the vehicle manufacturer after the initial commissioning of the kit. That applies especially to modifications or updates which may cause malfunctions in the trailer socket or any other part of the trailer electrical equipment!Depending on the type of trailer module used in this electric kit, diagnostic interrogation with the vehicle’s electrical system may be limited or will not function. The error memory inside the trailer module may not be able to be accessed by vehicle manufacturers diagnostic system.Error logs relating to the trailer electrical equipment, that may be generated in the vehicle manufacturers diagnostic system as a result of a test procedure, may be due to the incorrect installation of the towing electric kit or the false activation of the trailer module.We always recommend whenever possible, the following troubleshooting process: An analysis of the vehicle’s error memory and possibly clearing of all faults before the start of the installation! Try disconnecting the trailer module form the towing harness and re-start the fault clearing process! If in doubt, limit the time for troubleshooting to a max of 0,5 hours and call our Technical Support Team!Please follow our instructions carefully and always test the towing electrics using a true lighting board or a specifically designed bulb tester. If an LED tester is used, ensure it is equipped with correct load resistors or malfunctions will occur! This instruction is subject to changes and we reserve the right to make changes to design, colour etc. All of the data and illustrations may not be an exact representation but the text contained in this instructions must be observed!

Product overview

Righ tdUnit 503 Queensway Business ParkTELFORD TF1 7UL UK

SALETE

Revision: X / XXXX.XXXXX-XXX-XX

Web: www.rightEmail: sales@right

Righ tdUnit 503 Queensway Business ParkTELFORD TF1 7UL UK

SALETE

Web: wwwEmail: sales@righ

Revision: 4 / 19.01.2021PE-091-13MU

ECS Electronics UK20 Speedwell Close Hun�ngtonChester, CH3 6DX

Email-sales: uksales@ecs-elecrtronics.comEmail-technical: ukts@ecs-electronics.com

SALE: +44 (0) 7590 564639TECHNICAL: +44 (0) 7440 202052WEB: www.ecs-electronicsuk.co.uk

3/4

1

2

3

Adapter socketOptional

13-pin 7-pin

Products & Service: www.ecs-electronicsuk.co.uk

www.ecs-electronicsuk.co.uk

Download

from

Fitting Instructions

4

!

Code3:3

Note: It may be necessaryto check if this vehicle hasa stored radio code beforedisconnecting the battery!

Revision: 4 / 19.01.2021PE-091-13MU

ECS Electronics UK20 Speedwell Close Hun�ngtonChester, CH3 6DX

Email-sales: uksales@ecs-elecrtronics.comEmail-technical: ukts@ecs-electronics.com

SALE: +44 (0) 7590 564639TECHNICAL: +44 (0) 7440 202052WEB: www.ecs-electronicsuk.co.uk

Part No: XX-XXX-XXX

1/4

Electric wiring kit for towbars / 13-pin / 12 Volt / ISO 11446

Product overview

This electric kit has to be installed by a professional workshop or a suitable qualified person.The installation instructions must have been read and fully understood before the start of any installation. Please contact your wiring kit provider or the hotline shown in the footer should you need assistance!Make sure the vehicle is approved/homologated by the manufacturer to tow a trailer! Also please check that there is a definite compatibility between this vehicle and the electric kit!Following the installation of the electric kit, the fitting instructions should be kept together with the vehicle service document and vehicle handbook. The fitting instructions contain important information relating to the use and function of the towing kit as well as for any diagnostic or activation process, that might have to be repeated in the future (e.g. after the performance of a vehicle software update).All warranty claims will be forfeited if the electric kit or components contained therein are used incorrectly or modified. If a towing socket adaptor has been used to connect to the trailer or bike rack, this must be removed from the trailer socket once the trailer or bike rack has been disconnected.If the trailer or bike rack is not equipped with a rear fog lamp, depending on the towing vehicle type, the correct function of the towing kit cannot be guaranteed. In such cases, a rear fog lamp should be retro fitted.This towing electric kit will not be covered under warranty if any technical or electrical modifications or software updates have been performed by the vehicle manufacturer after the initial commissioning of the kit. That applies especially to modifications or updates which may cause malfunctions in the trailer socket or any other part of the trailer electrical equipment!Depending on the type of trailer module used in this electric kit, diagnostic interrogation with the vehicle’s electrical system may be limited or will not function. The error memory inside the trailer module may not be able to be accessed by vehicle manufacturers diagnostic system.Error logs relating to the trailer electrical equipment, that may be generated in the vehicle manufacturers diagnostic system as a result of a test procedure, may be due to the incorrect installation of the towing electric kit or the false activation of the trailer module.We always recommend whenever possible, the following troubleshooting process: An analysis of the vehicle’s error memory and possibly clearing of all faults before the start of the installation! Try disconnecting the trailer module from the towing harness and re-start the fault clearing process! If in doubt, limit the time for troubleshooting to a max of 0,5 hours and call our Technical Support Team!Please follow our instructions carefully and always test the towing electrics using a true lighting board or a specifically designed bulb tester. If an LED tester is used, ensure it is equipped with correct load resistors or malfunctions will occur! This instruction is subject to changes and we reserve the right to make changes to design, colour etc. All of the data and illustrations may not be an exact representation but the text contained in this instruction must be observed!

Revision: A / 08.06.2020SB-036-DHU

ECS Electronics UKThe Old DyehouseMacclesfieldCheshire, SK11 7RN UK

Email-sales: n.lea@ecs-electronics.comEmail-technical: ts-uk@ecs-electronics.com

SALE: +44 (0) 7980 847124TECHNICAL: +44 (0) 7440 202052WEB: www.ecs-electronicsuk.co.uk

ukts@ecs-electronics.com

www.ecs-electronicsuk.co.u

k

5

4/4

Revision: 4 / 19.01.2021PE-091-13MU

ECS Electronics UK20 Speedwell Close Hun�ngtonChester, CH3 6DX

Email-sales: uksales@ecs-elecrtronics.comEmail-technical: ukts@ecs-electronics.com

SALE: +44 (0) 7590 564639TECHNICAL: +44 (0) 7440 202052WEB: www.ecs-electronicsuk.co.uk