product profile line...500 cv (400 kw) to 22,500 cv (16,875 kw) g 12, 18, 24 or 36-pulses diode...

MOTOR STARTING AND PROTECTION

CWC - MINIATURE CONTACTORSg Switching operations in utilization

category AC-3 up to 22 Ag Integrated auxiliary contacts up to 16 Ag Low-consumption DC coils, allowing

direct connection to PLCs

PESW - ENCLOSED STARTERS

g Direct starters in thermoplastic enclosures:

g Three-phase: up to 40 HP at 220 V and 75 HP at 380/440 V (IEC)

g Single phase: up to 2 HP at 127/220/254 V (NEMA) and 12.5 HP at 127/220/440 V (IEC)

g Enclosures up to 20HP at 220 V and 40 cv at 380/440 V (IEC)

MPW - MOTOR-PROTECTIVE CIRCUIT-BREAKERSg Motor start and protection up to 40

cv at 220 V and 75 cv at 380/440 Vg Adjustable thermal releases to

protect the motor against overloads up to 100 A

g Wide range of accesories

RTW, RPW AND RIEW - ELECTRONIC RELAYS

CWB AND CWM - CONTACTORSg Complete line from 9 to 800 A (AC-3)g Several coil voltages available in AC

and DCg Complete accessory line

g Timers, voltage and level monitors, 17.5 mm and 22.5 mm wide

g Status indicator LEDsg Simple configuration and operation g Settings via external selectorsg Highly reliable contactsg Excellent precision and repeatabilityg Noise immunity

g Models up to 840Ag Manual or automatic reset g Convetional (RW) versions with trip

class 10g Electronic versions (RW_E) with

selectable trip class: 10, 20 and 30g Protection against phase loss and

phase unbalance in the electronic versions(RW_E)

RW AND RW_E - THERMAL AND ELECTRONIC OVERLOAD RELAYS

VARIABLE SPEED DRIVES

MVW3000 - MEDIUM VOLTAGE MVW01 - MEDIUM VOLTAGEg Motor voltage: 1.15kV to 13.8 kVg Motor current: up to 1,140 A1

g Input voltage: 1.15 kV...13.8 kVg High-efficiency air coolingg User-friendly interfaceg Arc detector system on

transformer and cells cabinet as

standardg Low harmonic content,

according to IEEE 519, IEC 61800-3 and G5/4-1

Note: 1) Up to 600 A for motor voltage above 6.9 kV.

g Input cubicle up to 36 kVg Applicable to medium voltage

induction motors of 2.3...6.9 kVg Maximum applicable motor of

500 cv (400 kW) to 22,500 cv (16,875 kW)

g 12, 18, 24 or 36-pulses diode input rectifier

g Power and control insulated by fiber optic

MW500 - MOTOR DRIVEg Three-phase supply voltage: 380-

480 Vg Output rated current: 4.3 to 16 Ag Free WPS Programming softwareg NEMA 4x/IP66 protectiong Dockable on the W22 motor

range or wall mountableg Disconnector (optional)

CFW501 - HVACg 200-480 V Supply voltage g 1 to 31 A rated output current 0.33 to

20 cvg Low input harmonic distortiong SoftPLCg Operator interface (HMI) with specific

units for HVAC applicationsg BACnet, Metasys N2 and Modbus-RTU

communication protocolsg Free WPS Programming Software

CFW11g 200 to 690 V single or three-phase

supply voltageg Output rated current: 2.7 to 2,850 A

(1.5 to 2,500 cv)g Vector control (sensorless or with

encoder) and WMagnet, VVW

CFW701 - HVACg 200-600 V Single or three-phase supply

voltageg Output rated current: 3.6 to 211 A g Power range from 2 HP (1.5 kW) to 175

HP (132 kW)g RFI filter according to the levels of EN

61800-3 (standard)g Versions with IP20 NEMA1 or IP55,

protection ratingg Inductor on DC linkg BACnet MS/TP, Metasys N2 and

Modbus-RTU communication protocolsg SoftPLC with free WPS programming

software

g 100-127 or 200-240 V single-phase supply voltage

g Output rated current: 1.6 to 4.2 Ag Maximum applicable motor of 0.25 cv to 1

cv 4.20 A (1 CV)g Vector (VVW) or scalar (V/F) control modesg SoftPLCg Free WPS programming software

CFW100

CFW500

CFW300

g 200-600 V single or three-phase supply voltage

g 1 to 56 A rated output current (0.25 to 75 cv)g SoftPLC with free WPS programming

softwareg Vector control (sensorless or with encoder) and VVWg STO and SS1 safety functionsg Versions with IP20 NEMA1 or IP66, protection ratingg PM motor control

g Single-phase or three-phase supply voltage at 100-127 V, 200-240 V or 380-480 V and three-phase motor power supply at 220 V or 380 V. Direct current power supply is also allowed

g Output rated current: 1.6 to 15.2 Ag Free WPS Programming softwareg Easy installationg Flash memory module (accessory)g Vector (VVW) or scalar (V/F) control modes

BTW - TERMINALS AND SIZING SOFTWAREg Complete line of terminals, mini terminals and relay terminalsg Connection options: screw, spring, push-in and eyed typesg Housing in polyamide PA66 with excellent dielectric properties and

high mechanical strengthg EX certificationg Intelligent software for configuration of terminal strips and their

accessoriesg Complete line of accessories and terminal and cable markersg Printing and engraving system of markers and tags

ELECTRICAL CONNECTIONS

CSW AND CEWg Pushbuttons, selector switches and

pilot lightsg IP66 protection degreeg Quick and easy assembly systemg High reliability auxiliary contactsg Lighting block with integrated LED

COMMAND AND SIGNALING

PRODUCT PROFILE AUTOMATION

1-877-PAMENSKY (726-3675) l www.pamensky.com

MT LINEg 4.3 to 15 inch screeng Real time clockg USB portg Ethernet communication g Free edition software

HUMAN MACHINE INTERFACES (HMI)

WEG Canada / V.J. Pamensky64 Samor Rd., Toronto, ON, M6A 1J6 1-877-PAMENSKY (726-3675)info@pamensky.comwww.pamensky.com

Cod

: VJP

5004

9853

| R

ev: 0

9 | D

ate

(m/y

): 12

/201

9Th

e va

lues

sho

wn

are

sub

ject

to c

hang

e w

ithou

t p

rior

notic

e.

SERVO DRIVES

SCA06 - SERVO DRIVEg Supply voltage of 220...230 V or

380...480 Vg High performanceg Precise movement control g Operation in closed loopsg Position feedback by means of

resolverg Control and power with

independent power supplies

SOFT-STARTERS

SSW05 SSW07g 220 to 575 supply voltage Vg Output rated current: 3 to 85 Ag Built-in bypassg Remote operating interface (HMI)

(optional)

g 220 a 575 supply voltage Vg Output rated current: 17 to 412 Ag 3-phase controlg Built-in bypassg Built-in motor protections

SSW06g 220 to 690 supply voltage V g Output rated current: 10 to 1,400 Ag Built-in bypass up to 820 Ag Torque control g SoftPLCg Motor inside delta connection allowedg Multiple accesory options for network

communication

SSW7000 - MEDIUM VOLTAGESSW900g Applicable to 2.3 to 13.8 kV medium voltage

induction motors g Maximum applicable motor of 350 cv (250

kW) to 16,300 cv ( 12,200 kW)g Torque control developed by WEG based on

the torque control of the frequency invertersg Vacuum bypass and main circuit breakers or

contactors

g 220 to 575 V supply voltageg Rated currents: 10 to 670 Ag Detachable graphic IHM with built-in

USB port and Bluetoothg Built-in bypassg Motor inside delta connection allowedg SoftPLC with free WPS programming

software

ELECTRICAL CIRCUIT PROTECTION

ACW - HIGH CAPACITY MOLDED-CASE CIRCUIT-BREAKERSg Complete accessory lineg Rated currents from 20 to 1,600 Ag Short-circuit breaking capacity

of up to 200 kA (220/240 V)g Models with adjustable

electronic and thermomagnetic releases

g Protection of electrical circuits and motor circuits

DWB AND DWA - MOLDED-CASE CIRCUIT-BREAKERSg Rated currents from 16 to

1,600 Ag Short-circuit breaking

capacity of up to 80 kA (380/415 V)

g Models with fixed, adjustable and electronic thermal and magnetic releases

MSW - SWITCH-DISCONNECTORSg Rated currents from 12 up to 160 A g Mounting option: top and baseg Compliance with the requirements

of NR12 and IEC 60947-3 standardsg Compact and easy installationg Complete range of accessoriesg Terminals with IP20 protection

degreeg Handle with IP65 protection degree

g Developed according to IEC 60947-2

g Breaking capacity of 18 to 45 kA @ 380 V

g Available in four frames: currents from 15 to 800 A

g Complete accessory line

AGW - MOLDED-CASE CIRCUIT BREAKERS

DWP - MOLDED-CASE CIRCUIT-BREAKERS FOR BUILDING APPLICATIONSg 16 to 800 A rated currentsg Fixed thermal and magnetic releasesg Protection of electrical installations

against overloads

PRODUCT PROFILE AUTOMATION

SWA - SERVOMOTORSg Torque of 0.8 at 40 N.m g Sinusoidal FCEMg Protection level IP65g Brushlessg Low inertiag Low maintenanceg Rapid dynamic responseg Low noise and vibration levels