product guide - content.interlinebrands.com€¦ · product guide providing the security world with...
Post on 30-Jun-2020
3 Views
Preview:
TRANSCRIPT
Product Guide
PROVIDING THE
SECURITY WORLD
WITH QUALITY
• LOCK TUMBLER PINS
• PINNING KITS
• SECURITY TOOLS
"FOR OVER 50 YEARS"
www.labpins.comProudly Madein the U.S.A.
$2.502007-2008
To the thousands of Security Professionals, the finest Lock Manufacturersand the best Security Hardware Distributors on the planet!
Thank you!Robert A. Labbe
PRESIDENT/CEO
Use Only Genuine LAB Pins.Since 1956
LAB006 FULL CATALOG copy 1/12/07 2:07 PM Page 1
Quality Universal Pins
.003© System “The New Standard”Created and designed for LAB by Robert A. Labbe, LAB President,CEO
The most accurate universal pin madeUse with the confidence of original pinsLAB PRO-STAFF Choice AwardColor-coded (LAB Copyrighted System)Radius edges that blend into flat center so master pins will not tip or rollNose designed to decrease key insertion force
Tops: .024 - .141 Bottoms: .126 -.360150 or 200 per pack
FLAT CENTER with precision chamfer, nose, finish and lengthColor-coded to Lock Industry Standards Precision machined toexceed industry standards
Tops: .010 -.320 Bottoms: .115 -.360150 or 200 Pins Per Pack
.005 System
LAB demands and purchasesonly the best raw materialsavailable. Brass material is360 alloy, full hard temper,for increased durability andcycle life. All LAB pins areinspected with the latestinspection equipment, qualitysystems and documented byour Quality Control Team.
A Word About Quality
UNIVERSAL PINS FOR A2,A3 & A4
INTERCHANGEABLE CORE CYLINDERS• .108 Diameter Pins• A2 Color-coded Brass for Easy Use•
A2 A3 A4Tops: 2-19 1-13 1-11Bottoms: 0- 9 0- 6 0 - 5100 Pins Per Pack
CURVED SHIMS• .0015 Stainless Steel• Exceeds Industry Standards• 25 Pack - LSM0V25• 100 Pack - LSM0V100
Original DesignI.CORE CAPS
CAPS• Machined Brass100 per pack - I027MV1,S1500 per pack - I027MP5
•Stamped Brass100 per pack - I027V1,S1500 per pack - I027P5
The LAB Royal Crown Pin™ Design is a Registered Trademark of LAB Security Systems
Use Only Genuine LAB Tumbler Pins for Guaranteed Accuracy
Original DesignBRASS COVERS
PIN COVERS• 6 Pin 25 Per Pack - FSC6V25
100 per pack - FSC6V100• 7 Pin25 Per Pack - FSC7V25
100 per pack - FSC6V100
LAB BRAND CYLINDER SPRINGS
UNIVERSAL .115NEW TANGLE RESISTANT • 115LT(LONG)
115LTV1, P1
STANDARD UNIVERSAL• 115L(LONG)
115LV1, P1
• 115S(SHORT)115SV1, P1
I.CORE .108• IC LONG108B V1108BP5 (500)(BEST STYLE)
• IC SHORT108FV1 (FALCON STYLE)
ORIGINAL FACTORY SPRINGSNEW SCHLAGE( T) PIN SPRING
• SPGSCHV1 MFR# F506-453SCHLAGE/WEISER CYL. CAP SPRING• SP74V1 SCH# C503-115
KWIKSET STAINLESS STEEL• KWKSPGV1,P1 MFR# 81777
CORBIN RUSSWIN STAINLESS STEEL• STD -111SDV1 MFR# 603F207• IC-111ICV1 MFR# 172F217
ACE SPRING• SPGACEV1 MFR# AC8.095 DIAMETER SPRINGS • SP95V1(for Master & Yale)
• ALL SPRINGS PHOSPHORBRONZE ARE 100 PER PACK EXCEPT WHERE NOTED
(S1) (V1)
(S1) (V1)
(S1) (V1)
(V1)(S1) (P1) (V)
(V)
(V1) (P1)
FOR MORE DETAILS SEE WEBSITE WWW.labpins.com1
LAB006 FULL CATALOG copy 1/12/07 2:07 PM Page 2
LAB Brand Pins For:
KWIKSET CYLINDERS• Color-coded to Industry Specifications• 7 Brass Master Pins - sizes: .023,.031, .046,
.069, .092, .115, .138• 2 Brass Standard Driver Pins - sizes: .160, .180• 2 Brass Anti-Pick Driver Pins - sizes: .160, .180 • 7 Brass Bottom Pins - sizes: .172,.195, .218,
.241, .264, .287 .310
LAB Brand Pins For:SCHLAGE CYLINDERS• 8 Brass Master Pins - sizes: 2-9• 3 Brass Driver Pins - sizes: .165,.200, .235• 10 Nickel Silver Bottom Pins - sizes 0 -9• Cap Retainer Pin SCHCAPV1 ,P1, S1
LAB Brand Pins For:CORBIN/RUSSWIN CYLINDERS• 101 Brass Master/Top Pins - Sizes: M.028 - M.320• 74 Nickel Silver Bottom Pins - Sizes: L.160 -L.354
LAB Brand Original Pins
LAB Brand Pins For:
WEISER CYLINDERS• 8 Brass Master Pins - sizes: 2-9• 1 Brass Driver Pin - size: .186• 10Brass Bottom Pins - sizes: 0-9
LAB Brand Pins For:ARROW CYLINDERS• 8 Brass Master Pins - sizes: 2 -9• 1 Brass Driver Pin - size: .155• 10Brass Bottom Pins - sizes: 0 -9
LAB Brand Pins For:
MASTER PADLOCKCYLINDERS (200 Pins per Pack)• 7 Brass Master Pins - sizes: 1-7• 2 Brass Top Pins - sizes: .120 & .136• 8 Brass Bottom Pins - sizes: 0-7
LAB Brand Pins For:YALE CYLINDERS• 7 Brass Master Pins - sizes: 2- 8• 3 Brass Driver Pins - sizes: .152, .190, .230 • 10 Brass Bottom Pins - sizes: 0-9
LAB Brand SPOOL PINS For:BEST INTERCHANGEABLE CORES (.108 dia.)
.075 .084 .100 .125 .126 .168
LAB Brand Pins For:CCL& NATIONAL CYLINDERSBrass Master Pins• 8 NATIONAL sizes: 2 - 9• 8 CCL sizes: X.025 - X.113Brass Top Pins• 4 NATIONAL sizes: 1-4• 2 CCL sizes: X.115 - X.171
Brass Bottom Pins• 10 NATIONAL
sizes: 0-9• 17 CCL
sizes: W.111- W.223
LAB Brand Pins For:SARGENT CYLINDERS• 8 Brass Master Pins - sizes: 2-9• 5 Brass Driver Pins - sizes: 10-14 • 10 Brass Bottom Pins - sizes: 1-10
2
All LAB Brand Original Pins are packaged 100 Pins Per Pack except where noted.
LAB Brand Interchangeable Core PinsLAB BEST I.CORE Pins for A-2,A-3,A-4 Systems — (P1)for use with all BEST Interchangeable Cores
• A-2 Master / Top Brass Pin sizes 2B -19B Bottom Nickel Silver Pin sizes 0A- 9A
• A-3 Master / Top Brass Pin sizes 1D -13D Bottom Nickel Silver Pin sizes 0C - 6C
• A-4 Master / Top Brass Pin sizes 1F -11F Bottom Nickel Silver Pin sizes 0E - 5E
LAB ORIGINAL I.CORE Pins for A-2,A-3,A-4 Systems — (V1) (P1)for use with all I.CORES using Nickel Silver Keys (Except BEST)ie; Schlage small format, Falcon, Medeco Keymark
• A-2 Master / Top Brass Pin sizes 2B -19B Bottom Nickel Silver Pin sizes 0A- 9A
• A-3 Master / Top Brass Pin sizes 1D -13D Bottom Nickel Silver Pin sizes 0C-6C
• A-4 Master / Top Brass Pin sizes 1F-11F Bottom Nickel Silver Pin sizes 0E- 5E
All I.Core pins above packaged in polybag quantities of 100,1,000,5,000,or 50,000.
STANDARD CYLINDERS (..115 dia.).155 .160 .165 .170 .172.180 .187 .190 .200 .207.220 .235 .240 .273 .320
SCHLAGE T-Pin • For use in all Schlage "F"Series Compressible Cylinders• Made from Full Hard Brass Alloy 360• Schlage - MFR# F506 - 451506451V1 , 506451S1 , 506451P1
Vial Stadium LSS001• Holds 35 LAB Vials• Tie down feet for easy mounting
on walls, benches or in vans• Vials not included
A LAB Exclusive
SCHLAGE Refill PackKRPSCH• 1 Brass (T) Pin Driver • 8 Brass Master Pins - sizes: 2-9• 3 Brass Driver Pins - sizes: 1-3• 10 Nickel-Silver Bottom Pins - sizes: 0-9•100 Pins per size
KWIKSET Refill PackKRPKWK (Color-coded Brass)• 6 Brass Master Pins • 2 Brass Standard Driver Pins• 2 Brass Anti-Pick Driver Pins • 6 Brass Bottom Pins• 100 Pins per size
Refill Packs Interchangeable Core• SCHLAGE • KWIKSET
SMART PAC®
Separates Pins into two tamper-proof, safety sealedcompartments with largeincrement identification.Clear packaging allows view of contents.
“Reusable”Flip Top Vials®
Snaptop lid easily stored and inventoried.
PolyBag:used for LAB Brand Original LockManufacturers Cylinder Pins.
.003 Pin Kit Refill PackKRP003Contains 124 packs of LAB Tumbler Pins 50 Pins Per SizeTops: .010 -.200Bottoms: .156 -.360
LAB Brand Pins for Tubular Locks and Weslock Available on Request
.005 Pin Kit Refill PackKRP005Contains 102 packs of LAB Tumbler Pins 50 Pins Per SizeTops: .010 -.300Bottoms: .150 - .360
I.CORE Refill PackKRPIC (Color-coded Brass)• 18 Brass Master Pins • 10 Bottom Pins - sizes 0 - 9• 2 brass caps - machined & stamped• 100 Pins/caps per size
Packaging Codes:“Reusable” Flip Top Vials® (V1) SMART PAC® (S1) POLY BAG (P1)
(V1) (S1) (P1)
(V1) (S1) (P1)
(V1) (S1) (P1)
(V1) (S1)
(P1)
(V1)
(P1)
(V1)
(P1)
(V1)
(V1) (S1) (P1)
LAB Pins are packaged for the convenience of the end user.• Reusable Flip Top Vials®
• SmartPac ® the New Standard in Pin Packaging • PolyBags
(V1) (S1) (P1)
LAB Brand Pins For:DORMA Full-Size SKC CYLINDERS (P1)• 4 Nickel Silver Top Pins• 10 Nickel Silver Bottom Pins
(P1)
FOR MORE DETAILS SEE WEBSITE WWW.labpins.com
LAB006 FULL CATALOG copy 1/12/07 2:07 PM Page 3
Universal Pinning Kits
Beautifully handcrafted in maple by New England wood craftsmen. Protected in clear polyfinish to preserve its outstanding qualities.• New larger printing under pin pockets• New larger “finger pin pockets” • Color Passport Pin Chart®
• Triple-latch protection• Slide-out center drawer with Master Pins, Springs and Tool compartment.
LWK003 104 sizesTop/Master Pin sizes: .024 -.170Bottom Sizes: .165 - .360
Only LAB kits contain the most up-to-date, comprehensive pinning charts with technical datastraight from the manufacturers. LAB’s exclusive “eye saver” exploded view of informationhelps make pinning easy and accurate.
Features
LWK005 92 sizesTop/Master Pin sizes: .010 - .250Bottom Sizes: .150 - .360
Size: 153⁄8”x 81⁄4” x 3”
3 FOR MORE DETAILS SEE WEBSITE WWW.labpins.com
The LAB CLASSIC
Woody Classic
SMARTWEDGE
Size:131⁄4 X 101⁄2 Front 2”Back 31⁄4”
LSW003Pin Sizes:• .003 Increments• 92 Sizes• Top Pins: .024T - .200T, .235T• Spool Pins: .160J, .165J, .180J• T-Pin: .170TP• Bottom Pins: .159B- .354B(Contains the most commonly used sizes – No Dead Stock)
Exclusive Features• Developed by Locksmiths with Confined Workspace in Mind.
• Color Passport Pinning Chart with Up-To-Date 2007 Factory Pinning Data• Slide-Out Tool Drawer
• 3 Deep Spring Pockets• .115 Long - NEW Tangle Resistant Springs
• .115 Short - Tangle Resistant Springs• T-Pin Spring for Schlage® “F ” Series Cylinders• Double-Sized Pin Pockets (holds up to 200 pins per size)• Large Tool Pocket on Top of Tray• Injected Molded High-Impact Tray with Pin Sizes Printed 100% Larger• Contains 3 Sizes of Spool Pins and the
“F ” Series T-Pin for Schlage® Cylinders
LSW005Pin Sizes:• .005 Increments• 86 Sizes• Top Pins: .010T - .200T, .230T, .235T• Spool Pins: .160J, .165J, .180J• T-Pin: .170TP• Bottom Pins: .155B- .360B
NEW !40% smaller-all the bells &whistles!
LAB006 FULL CATALOG copy 1/12/07 2:08 PM Page 4
EPK005• .005 Increments• 102 Sizes Tops: .010 - .300Bottoms: .150 - .360
Features
EPD003• .003 Increments• Accommodates 124 sizesTops: .010 -.200Bottoms: .156 -.360
EPD005• .005 Increments• Accommodates 102 sizes Tops: .010 -.300Bottoms: .150-.360
PRO PLATFORM WITH DRAWER EPD000Retrofit your LAB Wedge Kit or LAB Classic ProKits onto the LAB kit Platform (with drawer). It gives you the needed space for all your toolsright at your fingertips. (Pin block not included)
Features
The LAB WEDGE PRO andSUPER WEDGE Pin Kits aredesigned with a 10˚angle. This allows theuser to easily viewthe contents withoutleaning over the kitto select pin sizes.
FOR MORE DETAILS SEE WEBSITE WWW.labpins.com
LPK005• .005 Increments• 102 SizesTop Pins: .010 - .300Bottom Pins: .150 -.360Size: 211⁄2”x 73⁄4” x15⁄8”
All LAB Universal Kits Feature one-piece steel construction with Seal-Tight cover, combined withtraditional ultra-thin design.ALSO...
These WEDGE designed Kits are most commonly referred to by SecurityProfessionals as the “ULTIMATE” PinKits. SUPER WEDGE comes without pins to allow you to:• Purchase all or only those LAB
pins you presently need.• “Great way to make this
product very affordable”• Transfer the LAB pins from your
old LAB Pin Kits directly into this new product
• Purchase the New LAB Pin Kit Refill Pack KRP003/KRP005 see pg. 2
EXCLUSIVEColor Passport Pin Chart®
Pin sizes printed on the chart are the same color as the actual pins.
ONLY SOLD EMPTY !
EXCLUSIVE Dual-View® Pin TrayPin sizes are enlarged andprinted under the clearPETG tray, both aboveand inside the pinpockets for easy viewing at all angles.
Size: 211⁄8”x 73⁄4” x 31⁄8”
Size: 215⁄8”x 81⁄2” x Front 41⁄2” Back 53⁄4”
EPK003• .003 Increments• 124 SizesTops: .010 -.200Bottoms: .156 -.360
FOR CORRECT PASSPORT TM USAGE USE ONLY GENUINE.003© UNIVERSAL PINS FOR SMOOTH CYLINDER OPERATIONS
EFFECTIVE PLUG DIAMETER (EPD)The Depth of Cut and Length of Bottom Pinthat creates a proper shear line.
SPACINGTFC = To First CutBCC = Between Cut CentersMACS = Maximum Adjacent Cut Specifications
Copyright 1978, 1983, 1994, 2002 LAB Security Systems Corporation
.003
ARROW .014Depth Bitting Bottom Master Topof Cut No. Pin Pin Pin
.312 0 .180 —
.298 1 .192 —
.284 2 .207 .027
.270 3 .222 .042
.256 4 .234 .057
.242 5 .249 .069 .155
.228 6 .261 .084
.214 7 .276 .099
.200 8 .291 .111
.186 9 .306 .126EPD = .491 TFC = .265 BCC = .155 MACS = 7
CORBIN RUSSWIN DH & Z CLASS 028Depth Bitting Bottom Pin Master Topof Cut No. .509 Plug .552 Plug Pin Pin
.339 1 .162 .204 .027
.311 2 .189 .231 .057
.283 3 .216 .261 .084 .170
.255 4 .246 .288 .111
.227 5 .273 .315 .141
.199 6 .300 .345 —
EPD = .500 & .543 TFC = .250 BCC = .156 MACS = 4
SYSTEM 70CORBIN Z CLASS .014
Depth Bitting Bottom Pin Master Topof Cut No. .509 Plug .552 Plug Pin Pin
.339 1 .162 .204 —
.325 2 .174 .219 .027
.311 3 .189 .231 .042
.297 4 .204 .246 .057
.283 5 .216 .261 .069 .170
.269 6 .231 .273 .084
.255 7 .246 .288 .099
.241 8 .258 .303 .111
.227 9 .273 .315 .126
.213 0 .288 .330 — EPD = .500 & .543 TFC = .250 BCC = .156 MACS = 8
PRE-SYSTEM 70RUSSWIN DH CLASS .015
Depth Bitting Bottom Pin Master Topof Cut No. .509 Plug .552 Plug Pin Pin
.341 0 .159 .201 —
.326 1 .174 .216 —
.311 2 .189 .231 .030
.296 3 .204 .246 .045
.281 4 .219 .261 .060
.266 5 .234 .276 .075 .170
.251 6 .249 .291 .090
.236 7 .264 .306 .105
.221 8 .279 .321 .120
.206 9 .294 .336 .135EPD = .500 & .543 TFC = .250 BCC = .156 MACS = 7
PRE-SYSTEM 70CORBIN X CLASS .014
Depth Bitting Bottom Pin Master Topof Cut No. .509 Plug .552 Plug Pin Pin
.333 1 .171 .213 —
.319 2 .186 .228 .027
.305 3 .198 .243 .042
.291 4 .213 .255 .057
.277 5 .228 .270 .069 .170
.263 6 .240 .285 .084
.249 7 .255 .297 .099
.235 8 .270 .312 .111
.221 9 .282 .327 .126
.207 0 .297 .339 — EPD = .504 & .547 TFC = .197 BCC = .156 MACS = 8
PRE-SYSTEM 70
YALE .019Depth Bitting Bottom Master Topof Cut No. Pin Pin Pin
.320 0 .183 —
.301 1 .201 — .231
.282 2 .219 .039
.263 3 .240 —
.244 4 .258 .075 .190
.225 5 .276 —
.206 6 .297 .114
.187 7 .315 — .150
.168 8 .333 .150
.149 9 .354 — .114EPD = .502 TFC = .206 BCC = .164 MACS = 5
INVERT .231 BOTTOM PIN USE AS TOP PIN
WESLOCK .0156Depth Bitting Bottom Master Topof Cut No. Pin Pin Pin
.325 0 .156 —
.310 1 .174 —
.295 2 .189 .030 .170
.280 3 .204 .045
.265 4 .219 .060
.250 5 .234 .075
.235 6 .249 .090 .126
.220 7 .264 .105
— 8 — —
— 9 — — EPD = .484 TFC = .220 BCC = .156 MACS = 5
STANDARD
SCHLAGE .015Depth Bitting Bottom Master Topof Cut No. Pin Pin Pin
.335 0 .165 —
.320 1 .180 — .237
.305 2 .195 .030
.290 3 .210 .045
.275 4 .225 .060
.260 5 .240 .075 .200
.245 6 .255 .090
.230 7 .270 .105
.215 8 .285 .120 .165
.200 9 .300 .135EPD = .500 TFC = .231 BCC = .156 MACS = 6
INVERT .237 BOTTOM PIN USE AS TOP PIN
KWIKSET .023Depth Bitting Bottom Master Topof Cut No. Pin Pin Pin
.328 1 .171 .024
.305 2 .195 .045
.282 3 .219 .069 .180
.259 4 .240 .093
.236 5 .264 .114
.213 6 .288 .138
.190 7 — —
EPD = .498 TFC = .247 BCC = .150 MACS = 5
WEISER .018Depth Bitting Bottom Master Topof Cut No. Pin Pin Pin
.315 0 .168 —
.297 1 .186 —
.279 2 .204 .036
.261 3 .222 .054
.243 4 .240 .072 .185
.225 5 .258 .090
.207 6 .276 .108
.189 7 .294 .126
.171 8 .312 .145
.153 9 .330 .160EPD = .483 TFC = .237 BCC = .156 MACS = 6
ALSO FALCON STANDARDSARGENT .020Depth Bitting Bottom Master Topof Cut No. Pin Pin Pin
.328 1 .171 —
.308 2 .189 .039 .219
.288 3 .210 .060
.268 4 .231 .081
.248 5 .249 .099 .180
.228 6 .270 .120
.208 7 .291 .141
.188 8 .309 .160 .145
.168 9 .330 .180
.148 0 .351 .200EPD = .498 TFC = .216 BCC = .156 MACS = 9
INVERT .219
BOTTOM PIN USE AS TOP PIN
www.labpins.com
WEDGE PRO
Size: 211⁄2”x 77⁄8” x Front 2”Back 3”
CLASSIC PROLPK003• .003 Increments• 124 SizesTop Pins: .010 - .200Bottom Pins: .156 - .360
SUPER WEDGEwith Drawer
4
The LAB CLASSIC PRO,WEDGE PRO, SUPER WEDGE & SMART WEDGE PINNING KITS...feature exclusive designs that can only be found on LAB PINNING KITS - U.S. PATENT number: 5,482,159.
LAB006 FULL CATALOG copy 1/12/07 2:08 PM Page 5
Universal Pinning Kits
Features
DUR-X PRO with DrawerLDK003• .003 Increments• 124 SizesTop Pins: .010 - .200Bottom Pins: .156 - .360
DUR-X SEMI PROLDKU3• .003 Increments• 124 SizesTop Pins: .010 - .200Bottom Pins: .156 - .360
LDKZ5• .005 Increments• 102 SizesTop Pins: .010 - .300Bottom Pins: .150 - .360
• Steel construction finishedin LAB’s emerald green Hard-Coat metallic paint.Mini kits come with ColorPassport Pin Chart®.
• NO UNNECESSARY SIZES
DUR-X SEMI PRO and DUR-X PRO are both light weight and made of super tough polyethylene.Both kits have triple-latch, double-snap protection with center lid carrying handle. Key slots underboth kits make mounting in a van or on a work bench simple. Both feature full pin size ranges,Seal-Tight cover, Dual-View® Pin Tray and LAB’s exclusive Color Passport Pin Chart®.
Features
Size: 221⁄2”x 83⁄4”x3”
Size: 221⁄2”x 83⁄4”x21⁄4”
5 FOR MORE DETAILS SEE WEBSITE WWW.labpins.com
LDK005 • .005 Increments• 102 SizesTop Pins: .010- .300Bottom Pins: .150 - .360
LMK005• .005 Increments• 81 SizesMasters: .010 -.090Drivers: .095-.200Bottoms: .155-.360Cylinder Springs
LMK003• .003 Increments• 81 SizesMasters: .024 - .090Drivers: .093 - .235Bottoms: .156 - .354Cylinder Springs
STEEL MINI KITSMeasures just 8”x 6”x 11⁄16”
Small enough to fit into your tool box!!
LAB006 FULL CATALOG copy 1/12/07 2:08 PM Page 6
6FOR MORE DETAILS SEE WEBSITE WWW.labpins.com
Metal Pinning Kits
LAB BrandCORBIN RUSSWINLRCK6• 67 Brass -Top Pin Sizes• 51 Nickel-Silver Bottom Pin Size s• Spool Pins (standard) J172 & J320• Superior LAB Construction with Seal-Tight Cover• Dual-View® Pin Tray (pin sizes printed under clear tray)• Heavy-Duty Steel Box with Ultra-thin Features
LAB Brand SCHLAGES P K 115 • 10 Nickel-Silver Bottom Pins
• 8 Brass Master Pins• 3 Brass Top Pins
• Cylinder Cap Pins & Springs• Cylinder Springs
LAB Brand KWIKSETKPK115• 6 Brass Bottom Pins
• 2 Brass Top Pins• 6 Brass Master Pins
• Cylinder Springs• Color-coded to Industry Specifications
LAB Brand WEISER WSR115• 10 Brass Bottom Pins• 8 Brass Master Pins• 1 Top Pin • Cylinder Springs
LAB Brand SARGENTSGT115• 10 Brass Bottom Pins• 8 Master Pins• 5 Driver Pins• Cylinder Springs
All LAB Brand Original Lock Manufacturer’s Metal Pinning Kits contain Genuine Original Pinsin the specific sizes required to service the Original Manufacturer’s C y l i n d e r s .
Size: 211⁄2”x 77⁄8”x 11⁄2”
KWIKSET SIZES• 6 Brass Bottom Pins• 2 Brass Top Pins• 6 Brass Master Pins• Cylinder Springs• Color-coded to Industry
Specifications
For Original Lock Manufacturers Cylinders
LAB Brand Kit for: BEST A-2 I.CORELIKICTop Pins: 2B-19B Full Hard Brass - 100 Pins Per SizeBottom Pins: 0A - 9A Nickel Silver - 200 Pins Per Size
LAB Brand SCHLAGE & KWIKSET
LAB Brand Kit for:CORBIN/RUSSWIN SYSTEM 70 DH & ZLIKCR
Added NEW KIT FEAT U R E S• 2 style caps ( stamped & machined)• 3 in 1 (A2, A3, A4) key gauge• Deep tool pocket for LAB ANNEX®
• Color-coded Chart• Also Available: A3, A4 Combo Kit- A3BFK
(not in a WEDGE Shape)
Added NEW KIT FEATURES• SCHLAGE "F" series T- Pins and Springs• SCHLAGE Plug Follower• New Pinning/Bitting Information Chart
LAB Brand Color-coded I.CORE KIT (A2 SYSTEM)B F K 108 • 10 Brass Color- coded Bottom Pins, Sizes 0 - 9
• 18 Brass Master/ Top Pins Sizes 2-19• Caps and both 6 & 7 Pin Spring Covers
• 2 different length Springs 108B-Long 108F- Short
Added N E W KIT FEAT U R E S• Contains .160 & .18 0 Kwikset A n t i - P i ck Pins• Includes cylinder removal tool (pickle fork)• Plug follower• New Pinning/Bitting Color-coded
Information Chart
3 NEW MEMBERS OF THE LAB FAMILYWEDGE
• Contains Original Nickel Silver Bottom PinsBrass Tops and Masters
• .028 pin depths• .509 & .552 Diameter plugs• Repinning system 70
DH & Z including I.Core
Size: 131⁄4”x 101⁄2” x Front 2”Back 31⁄4”
For all Corbin Russwin keyways and all depth systems.Accomodates conventional, master ring and I.Core cylinders
111⁄8”x 81⁄4” x Front 2”Back 31⁄4”
111⁄8”x 81⁄4” x Front 2”Back 31⁄4”
111⁄8”x 81⁄4” x Front 2”Back 31⁄4”
111⁄8”x 81⁄4” x Front 13⁄4”
11”x 81⁄4” x Front 13⁄4”
LAB Brand ORIGINAL I.CORE (A-2 SYSTEM) Fo r: F a l c o n , Schlage small fo r m a t , Medeco Keymark etc.NSK108• 10 Nickel Silver Bottom Pins, sizes 0-9• 18 Brass Master/Top Pins Sizes 2-19• Caps and both 6 & 7 Pin Spring covers• 2 different length Springs 108B-Long
108F- Short• Deep Tool Pocket for LAB ANNEX®
11”x 81⁄4” x Front 13⁄4”
LSK2N1SCHLAGE SIZES
• 10 Nickel-Silver Bottom Pins• 8 Brass Master Pins• 3 Brass Top Pins• Cylinder Springs
LAB006 FULL CATALOG copy 1/12/07 2:35 PM Page 7
Wood Pinning KitsFor Original Lock Manufacturers Cylinders
LAB Brand A-2UNIVERSAL COLOR-CODEDINTERCHANGEABLE CORE PIN KITBWI108Color-coded .108 diameter Brass Pins• 10 Brass Bottom Pins, sizes 0- 9• 18 Brass Master/ Top Pins, sizes 2-19• Caps • 6 & 7 Pin Spring Covers• 2 Different length Springs
108B - Long 108F- Short
LAB Brand A-2INTERCHANGEABLE CORE PIN KITSBWB108For use in BEST I.CORES
• 10 Nickel-Silver Bottom Pins
• 18 Brass Master/ Top Pins
• BEST Caps • 108B Long Springs
BWF108For use in ALL I.CORESystems (Except BEST)ie; Schlage small format,Falcon Medeco Keymark
• 10 Nickel-Silver Bottom Pins
• 18 Brass Master/ Top Pins • 6 & 7 Pin Spring Covers • 108F Short Springs
7 FOR MORE DETAILS SEE WEBSITE WWW.labpins.com
Beautifully Master-crafted quality construction in natural full-grain maple. Features large pockets for extrapins and easy pin selection. They make great benchmates for in-shop use.
Features
LAB Brand WOOD PIN KIT for SCHLAGE CYLINDERSSWK115• 10 Nickel-Silver Bottom Pins• 8 Brass Master Pins• 3 Brass Top Pins• Cylinder Cap Pins & Springs• Cylinder Springs
LAB Brand 2•N•1 PINNING KIT for SCHLAGE & KWIKSET CYLINDERSLW21SK• Original Manufacturer’s Sizes• Nickel-Silver Bottom Pins (Schlage)• Brass Bottom Pins (Kwikset)• Brass Master Pins & Top Pins• Cylinder Cap Pins & Springs • Kwikset Pins are Color-coded to
Industry Specifications
Features
2 IN 1 PINNING KITSEach kit contains 6-cylinder Pinning Block with a “Mini Work Area”for hands-on re-pinning. Size for all Kits: 141⁄2”x 8” x 2”
LAB Brand 2•N•1 PINNING KIT for NATIONAL & CCL CABINET LOCK CYLINDERSLWK095• All Original Manufacturer’s Sizes• Color Coded Location Chart• .095 Diameter Top/Master/Bottom Pins
NEW Feature!
These kits contain
6-cylinder “Built-in”
pinning block
LAB006 FULL CATALOG copy 1/12/07 2:08 PM Page 8
MINI DUR-X PIN KITS
“A unique and revolutionary departure from the plastic breakable pinning kits.”
These very handy Mini-DUR-XPinning Kits contain only LABBRAND PINS for original lockmanufacturer’s cylinders. Made of Super-Tough polyethylene,each kit features a platform insert with a reusable protectivecover to protect contents.Contains location chart and onlythose size pins and springsrequired to re-pin specific lock companies’ cylinders.
Features
LAB Mini DUR-X Kit For:KWIKSET CYLINDERS LMDKWK• 6 Master Pins • 2 Standard Driver Pins • 2 Anti-Pick Driver Pins • 6 Bottom Pins• Cylinder Springs• Color -coded to Industry Standards
LAB Mini DUR-X Kit For:SCHLAGE CYLINDERSLMDSCH• 8 Master Pins (Brass)• 4 Driver Pins (Brass)• 10 Bottom Pins (Nickel-Silver)• Cylinder Cap Pins and Springs• Cylinder Springs
LAB Mini DUR-X Kit For:WEISER CYLINDERS LMDWSR• 8 Master Pins• 1 Driver Pin• 10 Bottom Pins• Cylinder Springs
LAB Mini DUR-X Kit For:SARGENT CYLINDERSLMDSGT• 8 Master Pins• 5 Driver Pins• 10 Bottom Pins• Cylinder Springs
LAB Mini DUR-X Kit For:ACE CYLINDERS (Tubular)LMDACE • 7 Top Pins • 3 Bottom Pins• Cylinder Springs
LAB Mini DUR-X Kit For:MASTER PADLOCK CYLINDERSLMDMAS• 7 Master Pins• 2 Top Driver Pins• 8 Bottom Pins• Cylinder Springs
LAB Mini DUR-X Kit For:ARROW CYLINDERSLMDARW• 8 Master Pins • 1 Driver• 10 Bottom Pins
LAB Mini DUR-X Kit:SECURITY PLUSLMDSEC• 13 Brass Spool Pins • Brass Serrated Pins• Adds pick resistance to most
standard Lock Cylinders using .115 diameter Pins
LAB Mini DUR-X Kit For:.019 YALE CYLINDERSLMDYLE • 7 Master Pins • 3 Driver Pins• 10 Bottom Pins• Cylinder Springs
LAB Mini DUR-X Kit For:BALDWIN CYLINDERSLMDBAL• 8 Master Pins (Brass)• 3 Top Pins (Brass)• 10 Bottom Pins (Nickel-Silver)• Cylinder Springs
LAB Mini DUR-X Kit For:DEXTER CYLINDERSLMDDXT• 8 Master Pins• 1 Top Pin• 10 Bottom Pins• Cylinder Springs
LAB Mini DUR-X Kit For:WESLOCK CYLINDERSLMDWES• 8 Master Pins• 2 Top Pins• 11 Bottom Pins• Cylinder Springs
LAB Mini DUR-X 3•N•1 UNIVERSAL KitLMD3N1
This unique 3•N•1 Universal kit contains all the Color-coded universal pins required to re-pin Kwikset, Schlage and Weiser.• 3 Top Pins• 23 Bottom Pins• Cylinder Springs
Size: 71⁄2” x 41⁄2” x 11⁄2”
Mini DUR-X Pinning KitsFor Original Lock Manufacturers Cylinders
LAB Mini DUR-X Kit For:A2 INTERCHANGEABLE CORE CYLINDERSLMDICC• Color-coded Brass .108Dia. Pins• 15 Top/Master Pins• 10 Bottom Pins• Long & Short Cylinder Springs• Caps
8FOR MORE DETAILS SEE WEBSITE WWW.labpins.com
LAB006 FULL CATALOG copy 1/12/07 2:08 PM Page 9
Picking Instruments designed by G.L. Finch
PICKING INSTRUMENTS TURNING TOOLS FOLLOWERS
LPT001 Shallow Hook – Deep Hook • LPT002 Half Ball – Shallow Hook • • LPT003 Half Diamond – Deep Hook • •LPT004 Large Rake – Shallow Hook • • LPT005 Medium Rake – Medium Hook • •LPT006 Small Rake – Deep Hook • • LPT007 Small Rake – Half Diamond • •LTTM01 Medium Turning Tool (.075) Full Twist ONE END • •LTTM02 Medium Turning Tool (.093) Full Twist ONE END • •LTTM03 Medium Turning Tool (.125) Full Twist ONE END • •LTT005 Auto Disc Turning Tool • •Removable Handles 1 6
LPT013 17 Piece Tri-Fold Set41⁄2” x 6”
Lar
ge R
ake
Med
ium
rak
e
Sm
all r
ake
Hal
f D
iam
ond
Hal
f B
all
Med
ium
Ho
ok
Sha
llow
Ho
ok
LTT
005
• Light weight • Very Durable • White Delrin®
• Reflects Light
LZT001• Curved Ends for Positive Grip • Perfect Size & Weight • Made of Stainless Steel
LCR005At last there is a time saving tool to remove the cylinder caps from Schlage, Weiser, Arrow and Falcon cylinders. This tool has been modified to accommodate the extended tailpiece for Schlage cylinders.
Pin Tip
LAB LUBE 1.0 oz.
LLT001Made of Dupont®
Teflon powder. A dry lubricant that will not “cake-up” as graphite does. A superior friction-fighting agent. Usedby most major lockmanufacturers
LPB001• Made of Maple• Holds 5 Plugs• Great for Repinning Multiple
Cylinders, Master and Grand Master Pinning
• Measures 51⁄4” x 41⁄4”
LTT
M01
LTT
M02
LTT
M03
LPT001 Shallow Hook - Deep HookLPT002 Half Ball - Shallow HookLPT003 Half Diamond - Deep HookLPT004 Large Rake - Shallow HookLPT005 Medium Rake - Medium HookLPT006 Small Rake - Deep HookLPT007 Small Rake - Half Diamond
LTT005 Auto Disc ToolLTTM01 .078 Tip - Medium FlexLTTM02 .093 Tip - Medium FlexLTTM03 .125 Tip - Medium Flex
All LAB Turning Tools are Double-Ended with Standard and Half-Twist Tips on Each End
LPT01510 Piece Set21⁄4” x 5”
Dee
p H
oo
k
CYLINDER CAPREMOVAL TOOL
FORMED END TWEEZERS WOOD BLOCK
PINNING TRAY
Features
• Durable Nylon Case• Velcro Closures• Stainless Steel Picks• Unique Designs • Half and Full Twist
designed Turning Tools
LPT0
15LP
T013Pick Set Contents
LSC001• A2 Interchangeable
Core Cylinders• Use for All Levels of
Master Keying• Exact Pin Usage• Instructions Included
9FOR MORE DETAILS SEE WEBSITE WWW.labpins.com
LFT000Schlage (.500) Dia.(For 3 types of cylinders)
LFT001Universal (.498) Dia.
LFT002Weslock (.500) Dia.
LFT003Corbin (.550) Dia.
LFT004Small Plug (.398) Dia.
LFT008Kwikset (.500) Dia.
FOLLOWER SETALSO AVAILABLELFT005 - 5 Piece Set of All the Above Followers(except Kwikset)
LAB EASY WAY PINNING CHART
LAB006 FULL CATALOG copy 1/12/07 2:08 PM Page 10
Professional Locksmith Tools & Accessories
LKG001• For Kwikset,
Schlage, Weiser, Weslock, Master Lock
• Accurate
5-N-1 GAUGE
10
INTERCHANGEABLE CORE ANNEX LICCBThe LAB Interchangeable Core Annex® offers the simplest method for the loading of Interchangeable Corepins, springs and caps, using only one instrument for bothfunctions. A second time saving feature is a SlideoutCode Book below the area where the core is slid inplace. This allows the user to unload the core pins,springs and caps into a confined area without spillingparts in or around the work area. This Slideout CodeBook is also used to decode the core to determine the bitting of the control key when it is not available andalso determine the top master key bitting.MADE OF DURABLE STAINLESS STEELUNITED STATES PATENT 6,021,655
INTERCHANGEABLE CORE
ANNEXANNEX®
with Slideout Code BookLICCBIncludes:• ANNEX with Slideout Code Book• Capping Instrument (LCI001)• Pin Stack Evictor (LPE001)
Approximate Size:• Depth: 11⁄8”• Width: 11⁄4”• Height: 3”• Weight: 0.80 lb.
CAPPINGINSTRUMENT
PIN STACK EVICTOR(Both tools above are exclusively designed for use with the LAB I.C. ANNEX ®only)
FOR MORE DETAILS SEE WEBSITE WWW.labpins.com
LAB PIN/WORK MAT
LABMAT• Approximate size 16” x 10”
polyvinyl• Pinning work mat retains
hundreds of loose pins • Molded in residential pin
block area• Great for vans or benches
KWIKSET CYLINDERREMOVAL TOOL
LKGIC• A2, A3, and A4 Systems• .20 gauge thick 304
stainless steel• Laser machined and
engraved to maintain LAB’s strict quality standards
• Measures approximately 2.75” x 2.00” for easy storage
I.CORE KEY GAUGE
LED EAR LIGHT LABLED• Great for picking and wafer
reading in low light areas• LED high intensity focused
beam – adjustable in the vertical and horizontal
• Weighs less than 1 oz.• Two replaceable CR-2016
lithium batteries included• Comfortable padded
universal fit around the ear
CRT001• Used on Standard 400 Series
cylinder assemblies• Made from 0.080” thick
cold rolled steel• Yellow dichromate coated
to resist corrosion
NEW Pin DecoderDecodes Medeco® Biaxial® Bottom Pins and MORE.
LPDMED• Determine Length, Angle, Skew for
Medeco Biaxial Bottom Pins• Measure/Identify Master and
Driver Pin Lengths• Determine Key Cut Depths• Identify Fore and Aft Key Cut Positions
PATENT PENDING
2-N-1 GAUGE
LKGKS• 2-N-1 Gauge for
Kwikset, Schlage only• Accurate
• Stackable• Tie down feet• Keyhole slots for under bench attachment• Stops angled to prevent kits from sliding• Holds 2 LAB kits (Size: 11”x81⁄4”x13⁄4”)
and most kits made by LAB for the Original Manufacturers
KIT KADDY Storage Unit LKK000
LCI001 CAPPING INSTRUMENTLPE001 PIN STACK EVICTORTools are available separately.
®
®
NEW
#1 SellingCappingInstrument
LAB006 FULL CATALOG copy 1/12/07 2:08 PM Page 11
Schlage, Medeco and Biaxial, Keymark, Kwikset,Weiser, Corbin, Russwin, Best, Falcon, Master, Arrow,Weslock,Yale, CCL, National, Sargent,Ace, Dexter, Delrin products of DuPont and other tradenames and trademarks used in this catalog are owned by the respective manufacturers of such products.
LAB Security Products is not responsible for typographical errors.LAB products are sold only through qualified Security Wholesale Distributors. Please log on to our website or call for a distributor in your area.
ORIGINAL MANUFACTURERS KITS - (Pins Pg.2, Springs Pg.1) Matl. Item ID Pg.ACE Mini Dur-X Kit Poly LMDACE 8 8ARROW Mini Dur-X Kit Poly LMDARW 8 8BALDWIN Mini Dur-X Kit Poly LMDBAL 8 8BEST ORIGINAL A2 System Kit Wood BWB108 7 7BEST ORIGINAL A2 System Kit (Wedge Institutional) Metal LIKIC 6 6CCL & NATIONAL Cabinet Lock Kit Wood LWK095 7 7CORBIN RUSSWIN Kit Metal LRCK6 6 6CORBIN RUSSWIN System 70 DH and Z Series Kit (Wedge Institutional) Metal LIKCR 6 6DEXTER Mini Dur-X Kit Poly LMDDXT 8 8KWIKSET Kit (Wedge) (Kit Refill Pack KRPKWK, Pg. 2) Metal KPK115 6 6KWIKSET Mini Dur-X Kit Poly LMDKWK 8 8MASTER PADLOCK Mini Dur-X Kit Poly LMDMAS 8 8ORIGINAL ICORE A2 System Kit (Falcon, Medeco Keymark, Schlage SFIC) Wood BWF108 7 7 7 7ORIGINAL ICORE A2 System Kit (Falcon, Medeco Keymark, Schlage SFIC) Metal NSK108 6 6 6 6SARGENT Kit Metal SGT115 6 6SARGENT Mini Dur-X Kit Poly LMDSGT 8 8SCHLAGE & KWIKSET Kit Wood LW21SK 7 7 7SCHLAGE & KWIKSET Kit Metal LSK2N1 6 6 6SCHLAGE Kit Wood SWK115 7 7SCHLAGE Kit (Wedge) (Kit Refill Pack KRPSCH, Pg. 2) Metal SPK115 6 6SCHLAGE Mini Dur-X Kit Poly LMDSCH 8 8WEISER Kit Metal WSR115 6 6WEISER Mini Dur-X Kit Poly LMDWSR 8 8WESLOCK Mini Dur-X Kit Poly LMDWES 8 8YALE .115 (.019 Step) Mini Dur-X Kit Poly LMDYLE 8 8UNIVERSAL ICORE KITS - (Pins/Springs Pg.1, Kit Refill Pack KRPIC Pg.2) Matl. Item ID Pg.UNIVERSAL ICORE A2 System Kit Wood BWI108 7 7UNIVERSAL ICORE A2 System Kit (Wedge) Metal BFK108 6 6UNIVERSAL ICORE A2 System Mini Dur-X Kit Poly LMDICC 8 8UNIVERSAL ICORE A-3/A-4 System Kit Metal A3BFK 6 6UNIVERSAL .003 KITS - (Pins/Springs Pg.1, Kit Refill Pack KRP003 Pg.2) Matl. Item ID Pg.WOODY Classic .003 Kit Wood LWK003 3 3 3 3 3 3 3 3 3 3 3SMART WEDGE .003 Kit with Drawer Metal LSW003 3 3 3 3 3 3 3 3 3 3 3WEDGE PRO .003 Kit Metal EPK003 4 4 4 4 4 4 4 4 4 4 4SUPER WEDGE PRO .003 Kit with Drawer (Empty-Contains no pins) Metal EPD003 4 4 4 4 4 4 4 4 4 4 4CLASSIC PRO .003 Kit Metal LPK003 4 4 4 4 4 4 4 4 4 4 4MINI .003 Kit Metal LMK003 5 5 5 5 5 5 5 5 5 5 5DUR-X PRO .003 KIT with Drawer Poly LDK003 5 5 5 5 5 5 5 5 5 5 5DUR-X SEMI-PRO .003 Kit Poly LDKU3 5 5 5 5 5 5 5 5 5 5 53 IN 1 Mini Dur-X Kit (Kwikset, Schlage & Weiser ) Poly LMD3N1 8 8 8 8UNIVERSAL .005 KITS - (Pins/Springs Pg.1, Kit Refill Pack KRP005 Pg.2) Matl. Item ID Pg.WOODY Classic .005 Kit Wood LWK005 3 3 3 3 3 3 3 3 3 3 3SMART WEDGE .005 Kit with Drawer Metal LSW005 3 3 3 3 3 3 3 3 3 3 3WEDGE PRO .005 Kit Metal EPK005 4 4 4 4 4 4 4 4 4 4 4SUPER WEDGE PRO .005 Kit with Drawer (Empty-Contains no pins) Metal EPD005 4 4 4 4 4 4 4 4 4 4 4CLASSIC PRO .005 Kit Metal LPK005 4 4 4 4 4 4 4 4 4 4 4MINI .005 Kit Metal LMK005 5 5 5 5 5 5 5 5 5 5 5DUR-X PRO .005 KIT with Drawer Poly LDK005 5 5 5 5 5 5 5 5 5 5 5DUR-X SEMI-PRO .005 Kit Poly LDKZ5 5 5 5 5 5 5 5 5 5 5 5SECURITY PLUS Mini Dur-X Kit Poly LMDSEC 8 8 8 8 8 8 8 8 8 8 8TOOLS & ACCESSORIES Item ID Pg.KEY GAUGE 5 IN 1 (Kwikset,Schlage,Weiser,Weslock,Master) LKG001 10 10 10 10 10 10KEY GAUGE 2 IN 1 (Kwikset & Schlage) LKGKS 10 10 10KEY GAUGE ICore A2/A3/A4 LKGIC 10 10 10 10KWIKSET Cylinder Removal Tool CRT001 10 10CYLINDER CAP Removal Tool (Schlage, Weiser, Arrow & Falcon) LCR005 9 9 9 9PLUG FOLLOWER, Schlage LFT000 9 9PLUG FOLLOWER, Universal .500 PLUG LFT001 9 9 9 9 9 9 9 9 9PLUG FOLLOWER, Weslock LFT002 9 9PLUG FOLLOWER, Corbin .550 PLUG LFT003 9 9PLUG FOLLOWER, Small Plug .398 PLUG LFT004 9 9 9 9PLUG FOLLOWER SET, LFT000,1,2,3 & 4 LFT005 9 9 9 9 9 9 9 9 9 9 9 9ICORE SLIDE CHART LSC001 9 9 9 9ICORE BLOCK ANNEX (Includes Capping & Evictor Tools) LICCB 10 10 10 10ICORE BLOCK CAPPING INSTRUMENT LCI001 10 10 10 10ICORE BLOCK PIN STACK EVICTOR TOOL LPE001 10 10 10 10PIN DECODER for Medeco Biaxial Pins LPDMED 10 10LAB MAT Multi Color Vinyl Work Mat LABMAT 10PINNING BLOCK LPB001 9FORMED END TWEEZERS LZT001 9LAB TEFLON LUBE LLT001 9LED Ear Light LABLED 10PICKS, LPT001,2,3,4,5,6,7 LPT 9TURNING TOOLS LTTM01,2,3 LTT 9PICK SET, 17 PIECE, TRI FOLD CASE LPT013 9PICK SET, 11 PIECE, FOLD OVER CASE LPT015 9PRO PLATFORM WITH DRAWER EPD000 4VIAL STADIUM LSS001 2KIT KADDY LKK000 10
Ace
CC
L - National
Corbin R
usswin
Dexter
Ace
Arrow
Weiser
Weslock
Yale
Kw
ikset
Schlage
Sargent
Baldw
in
Best
Master Padlock
Medeco
Master Padlock
Medeco
Universal Icore
Original Icore
Sargent
Schlage
Weiser
Weslock
Yale
Arrow
Baldw
in
Best
CC
L - National
Corbin R
usswin
Dexter
Original Icore
Universal Icore
Kw
ikset
PRODUCT INDEX
LAB Original Manufacturers Pins - Page 2Springs, Shims, ICore Caps & Covers - Page 1Kit Refill Packs - Page 2
LAB Original Manufacturers Pins - Page 2
1-800-243-8242 FAX 1-860-583-7838
www.labpins.com
LAB006 FULL CATALOG copy 1/12/07 2:08 PM Page 12
top related