product catalogue - primary packaging€¦ · pp mono blister pack, which is the best solution 90...
Post on 25-Jul-2020
2 Views
Preview:
TRANSCRIPT
PRO
DUCT
CAT
ALO
GUE
etimex
etimex-pp.com
APP
EALI
NG
PA
CKA
GIN
G S
OLU
TIO
NS 65
65 YEARS OF PACKAGING COMPETENCE ETIMEX
PHARMAFILMS
READY MEALTRAYS
INJECTION-MOULDED POTS
FLEXIBLE FILMS
THERMO-FORMINGSHEETS
EVERYDAY & EVERYWHEREPRIMARY PACKAGING
PRODUCT PACKAGING AT THE HIGHEST LEVEL
ETIMEX creates high-quality packaging solutions for
food, pet food, baby food and convenience, pharma-
ceuticals and technical articles.
We offer you the highest degree of flexibility and ef-
ficiency with our highly motivated and experienced
team who satisfy your requirements for packaging
solutions made from plastic films as well as plas-
tic containers. We use leading technologies in the
production stages of extrusion, thermo-forming, in-
jection-moulding, barrier injection-moulding and in-
mould labelling (IML).
We guide you from the first ideas on design develop-
ment, prototype production (3D), pilot tools and tool
design and construction through to production and
delivery.
OUR TECHNOLOGIES
EXTRUSION > From 25 µm to 2,500 µm, up to 9 layers
> Cast film extrusion lines
> Roll-stack extruders
> Quenching technology
> Ultra transparent single and multi-coloured films > Use of various barrier materials (EVOH and others)
THERMOFORMING
> Standard forms, specially drafted designs, > snap trays, perforated splittable trays and multi-
compartment trays > Decoration with labels (IML)
> Use of robots for extraction and packaging
INJECTION-MOULDING
> PP without barriers
> PP with barriers (co-injection): 'plastic container'
> With or without a label (IML)
> Use of robots for extraction and packaging
65 YEARS OF PACKAGING COMPETENCE
2
etimex
INDEX
ETIMEX ABOUT ETIMEX
PHARMACEUTICAL FILMS PURELAY® LID PURELAY® PHARM
FLEXIBLE FILMS VISTALUX® LAMINATED PP FILMS VISTALID® PP PEELABLE FILMS VISTAPEEL® PP PEELABLE FILMS
THERMOFORMING SHEETS VISTAFORM® PP FILMS WITH HIGH TRANSPARENCY
INJECTION-MOULDING NEW
READY MEAL TRAYS VITESSA® C PET & A PET COMEDA® PP CONVINA® PP BARRIER
QUALITY
3
EVERYDAY & EVERYWHEREPRIMARY PACKAGING
2
4 -
8 -
12 -
16 -
18 -
38 -
7
11
15
17
37
39
PHARMACEUTICAL FILMS
PURELAY® PHARM FILMS are made from polypro-
pylene and they offer the best water-vapour barriers
with easy quality control for your packaging process
- it is sufficient to measure the distributed wall
thickness.
PROPERTIES & ADVANTAGES
> High transparency
> High water-vapour barrier
> Cost-effectiveness
> High machine performance
> Clean-room production
> Excellent reproducible thermoforming sheet
properties
> PURELAY® PHARM and PURELAY® LID give you a
PP mono blister pack, which is the best solution
for PVC and PVDC-free blister solution.
PURELAY® LID FILMS
> Push-through PP sealing film for
pharmaceutical blister packaging
> Substitution of e.g., aluminium is possible
> The film or sheet can be printed using
conventional processes or it can be lacquered with a heat-resistant top coat
> PURELAY® PHARM and PURELAY® LID give
you an environmentally friendly and
aluminium-free PP mono blister
4
FILMS PHARMACEUTICAL APPLICATIONSetimex
PUSH-THROUGH FORCE (N)
25 N 27 N 25 N
40
30
20
10
0
PURELAY® LID90 µm
Aluminium-film 16 µm
Alu 9 µm laminated against paper
(40g/m2)
ABSORPTION TIME OF WATER VAPOUR
0
1
2
3
4
5
Material
Purelay250
Purelay300
PVDC40
PVC
+ 10 %
High-barrier
PVDC60
PVDC90
The graphics show the cross-section of a blister from the side
PVC 250µm
PVC / PVDC250µm / 40 g/m2
PURELAY®PHARM250µm
250 μm27 μm
8 μmPVDC
250 μm
80 μm
210 μm
90 μm 110 μm 180 μm
200 μm
80 μm
85 μm 90 μm 180 μm
250 μm 200 μm
80 μm
85 μm 90 μm 180 μm
250 μm27 μm
8 μmPVDC
250 μm
80 μm
210 μm
90 μm 110 μm 180 μm
200 μm
80 μm
85 μm 90 μm 180 μm
250 μm 200 μm
80 μm
85 μm 90 μm 180 μm
250 μm27 μm
8 μmPVDC
250 μm
80 μm
210 μm
90 μm 110 μm 180 μm
200 μm
80 μm
85 μm 90 μm 180 μm
250 μm 200 μm
80 μm
85 μm 90 μm 180 μm
DISTRIBUTED WALL THICKNESS
PHARMACEUTICAL FILMS PROTECTED PRODUCTS
The moulded PURELAY® blister film offers considerable
advantages for protecting pharmaceutical products
5
Shel
f life
in y
ears
PHARMACEUTICAL FILMS QUALITY THAT CONVINCES
PURELAY® Pharm offers the best protection for your
product in bubble-wrap packaging. The moulded
PURELAY film protects the product from environ-
mental influences. PURELAY® PHARM’S water vapour
permeability is far better than most plastic composite
films.
The quality of the barrier can be easily and quickly
checked by measuring the distributed wall thickness.
The risk of quality problems that are caused due to
damaged thin barriere layers are eliminated.
Only medically licensed and certified types of poly-
propylene are used for PURELAY® PHARM. The PURE-
LAY® PHARM thermoforming films are available in
thicknesses between 250 µm and 900 µm and they
are either transparent or coloured white or red. PURE-
LAY® PHARM fulfils all of the authorities requirements
according to DMF no. 17748.
The quality of PURELAY® PHARM has been used by
well-known customers in the pharmaceutical industry
for many years. Etimex's quality assurance achieves
an excellent standard. Qualitative statistics are avail-
able on request.
The clean room complies with DIN EN ISO 14644
(Class 8), which corresponds to the previous FDA 209
B (Class 100,000). The concentration of particles is
monitored continuously.
6
COST OF MATERIALS
Cost
0
1
2
3
4
5
Material
Purelay250
Purelay300
PVDC40
+ 17 %
High-barrier
PVDC60
PVDC90
FILMS FOR PHARMACEUTICAL APPLICATIONSetimex
PURELAY® PHARMACEUTICAL FILMS
PURELAY® PHARM can be recycled not only as a ma-
terial but also as energy because it only consists of
one material that is based on carbon and hydrogen.
The PP plastic fractions are recycled in the mass flow as mono-blisters with PURELAY® LID. The recycling as
energy takes place in the composite with aluminium,
so that the consumption of fossil fuels is reduced in
this case.
You can find further information online at
purelay-die-pharmablisterfolie.de
OPTIMIZE PROFITS SAVE PACKAGING COSTS
PURELAY® THERMOFORMING FILMS give you the
same results for the shelf life of your products but at
a lower cost.
Therefore ETIMEX recommends to compair all current
used thermoform sheets as the first step. Ascertain
your potential saving in relation to the product and
obtain our advice about the most economical imple-
menting strategy.
Due to the lower density of PURELAY® PHARM you
will basically receive more m2 / μm. We will further help
you to permanently reduce your packaging cost as well as
to eleminate the qualitative risks that are related with such
primary packaging.
7
40 % more film
+ 17 %
FILM YIELD IN RELATION TO WEIGHT
PHARMACEUTICAL FILMS
PURELAY®
250 μm
PURELAY®
300 μm
PVC 250 μm
PURELAY® PHARM is the economical alternative to
PVDC-ACLAR® laminates with the same barrier properties.
Specific weight of PP 0,9 g/cm3
Specific weight of PVC1.35 g/cm3 and higher
VISTALUX®, VISTALID® AND VISTAPEEL®
ETIMEX produces high-quality mono-extruded and
co-extruded laminated films on modern cast-film ex-
trusion lines, as well as films for polypropylene coat-
ings. Flexible films that are based on CPP offer you as
the converter tailor-made properties for many areas
of application.
VISTALUX® LAMINATED FILMS, FILMS FOR COATING
These products are firm-sealing films for heavy-duty,
securely closed packaging. The films only bond to PP
or onto themselves. Our PP laminate films with direct
contact to the product enable the packaging to be se-
curely closed.
Manufacturing according to the legal standards on
food and choosing the raw materials with suitable li-
censing give you reliability when selecting the right
films for your composite.
8
VISTALUX®
VISTALUX® Laminate films made from polypropylene
can be used for the following:
> Medicine
> Hygiene
> Technology
> Food
EXAMPLES OF APPLICATION
> Test strip for urine analysis
> In-Vitro Diagnostics
> Graphical section, plate mounting
> Release liner
> Hygiene area, fastenings for baby
nappies and incontinence briefs
> Tapes
> Use as a seal in valve plates
in aerosol cans and for back-on-valve usage
FOR FOOD AND PET FOOD
> Stand up pouches
> Sealed pouches
> Contact foil for food products
CPP FILMS etimex
9
DESIGN
> Standard colours of transparent and white. Other colours are available on request > Mono-extruded and co-extruded; also textured
> Formulas are adapted to suit the individual
requirements
> e. g., for siliconisation (free of additives, smooth
or embossed)
> Films with pharmaceutical licensing.
Pre-treated on one side or on both sides.
> Colours and special equipment are possible
FLEXIBLE FILMS
APPLICATION
Laminated against PET, OPP, OPA, aluminium, metals
sheet, paper, etc.
The finished duplex or triplex composites are used for
sealed pouches, sealed films or for stand-up pouches
to package food, pet food, medicinal and technical
products.
VISTALID® & VISTAPEEL® FILMS
These products are peelable films based on PP.
VISTALID® FILMS > Co-extruded, transparent and white, punchable
versions (opaque, solid white) > 40 µm to 300 µm, in opaque white from 80 µm
> Film width unfilled from 1,550 mm,
filled from 1,350 mm
VISTAPEEL® FILMS Peelable with ultra-seal seam strength against PP
and itself; can be used for sterilisation with high
demands.
> Naturally transparent, white
> 40 µm to 200 µm
> Film width from 1,500 mm
10
APPLICATION
These products are laminated against PET, or are
lacquered with a heat-resistant coating to be used
as peelable sealing films in FFS machines. The filled
versions are also suitable as punched plastic boards
for peelable sealing of trays and pots. Special designs
are also suitable for the sterilization of the filled
packaging.
SPECIAL APPLICATIONPeelable against itself in composite film pouches.
OUR RANGE OF PRODUCTS IN THE AREA OF FLEXIBLE FILMS
> Formulas for pharmaceutical or sterilisation
applications are available
> Mechanical properties can be altered to a
certain extent
> Coloured versions (translucent and opaque)
VISTALID® AND VISTAPEEL® FILMS etimex
11
VISTALID® &VISTAPEEL® POLYPROPYLENE PEELABLE FILMS
These products are used in the food area as lid films
for dairy products, fruit cups and clip-on lids to con-
serve freshness if the film lid has already been peeled
off.
However, these formulas for films can be used in oth-
er areas where it is intended to open the contents
by peeling off the lid conveniently, e.g., contact lens
packaging.
FLEXIBLE FILMS
ETIMEX PP BARRIER THERMOFORMING SHEETS
The thermoforming polypropylene barrier films with
EVOH as the barrier layer (PP EVOH PP) are suitable
for manufacturing thermo-formed packaging with a
high-performance oxygen barrier.
> Temperature resistant from +2°C to +125°C
> Shelf life up to 12 months or more
> In-house development department
AREAS OF APPLICATION
> Sterilized food
> Baby food
> Fruit salads
> Coffee capsules
> Desserts
> Pet food
> and many more items
PROPERTIES
COLOURS
> White/white, ivory/white, black/black, or black/
white, as well as transparent
> Other colours are available on request
> Dual color
STERILISATION
> Possible up to 125 °C
ADDITIVES
> The film can be adapted to the product's individual
requirements on request, e.g. equipped with
antistatic, Scavenger (absorber)
WIDTH
> 200 - 750 mm
THICKNESS
> 600 - 2,500 µm
THERMOFORMING SHEETS etimex
12
ETIMEX PP THERMOFORMING FILMS
The thermoforming mono-layer and multi-layer films
made from polypropylene (PP) are suitable for manu-
facturing thermo-formed packaging on thermoform-
ing presses and FFS machines.
> Manufactured from polypropylene (PP, mono-film) > Temperature resistant from +2°C to + 125 °C
(homo PP) and -40 °C to + 125 °C (co-PP) +125°C
> In-house development department
AREAS OF APPLICATION
> Fresh ready meals
> Chilled ready meals
> Frozen ready meals
> Snacks
> Confectionery
PROPERTIES COLOURS > Transparent, white, black and coloured
> Further colours are available on request, including
dual colour
ADDITIVES
> The film can be adapted to the product's individual requirements, e.g. with the use antistatic, etc.
WIDTHS
> 200 - 750 mm
THICKNESSES
> 600 - 2,500 µm
13
THERMOFORMING SHEETS
14
VISTAFORM®PP THERMOFORMING FILM
Thermoforming sheets made from polypropylene (PP)
with finely crystallized PP-structure are manufac-
tured according to a patented process. The film excels
thanks to its outstanding reproducible thermoforming
properties and high level of transparency.
They are suitable for making thermo-formed packag-
ing on thermoform presses and FFS machines.
AREAS OF APPLICATION
> Snack packaging
> Blister packaging in the food area and technical
area (e.g., tabs)
> FFS for demanding applications
PROPERTIES COLOURS > transparent
> other colours are available on request
WIDTH
> 150 - 1,220 mm
TRANSPARENT
> 250 - 800 µm
> Other sizes are available on request
THERMOFORMING SHEETS etimex
ETIMEX PET THERMOFORMING FILM
We supply mono-layer and multi-layer films made
from polyester (PET) which are suitable for making
thermo-formed packaging on thermoforming presses
and FFS machines.
> Manufactured from amorphous polyester (APET)
> Transparent
> Temperature resistant - 40°C to + 70°C
AREAS OF APPLICATION
> Fresh snacks and salads
> Gourmet food
> Deep-frozen products
> Ready meals
> Suitable for MAP
PROPERTIES COLOURS
> Natural colour
> Transparent
> Further colours are available on request
ADDITIVES
> The film can be adapted to suit the product's
individual requirements on request, e.g. using a
slip agent etc.
WIDTH
> 200 - 710 mm
THICKNESS
> 400 - 800 µm
> Other sizes are available on request
LEGAL REQUIREMENTS FOR FOOD
The raw materials that are used to manufacture the
films are licensed for contact with food according to
the currently applicable EU guidelines. The limiting
values regarding migration comply with the EU guide-
line. FDA is available on request.
15
THERMOFORMING SHEETS
16
INJECTION-MOULDING FOR COMEDA® PP AND CONVINA® PP BARRIER POTS & TRAYS
Many thermoforming products can also be produced
by injection moulding with the same properties. They
offer cost-effectiveness for large quantities because
of the automated fabrication.
Metal containers can be replaced by plastic cans, in-
cluding with rim pull.
OUR SPECIAL RANGE OF PRODUCTS IN THE AREA OF RIGID PACKAGING INJECTION-MOULDING POTS MENU TRAYS
> Complex geometrical shapes (e.g. engravings and
logos, multi-compartment trays, etc.)
> Multi-layer film design (also multi-coloured)
> Base ventilation (channels), with ridges for in
creased stability
> Trays with labels (IML)
> Clamping lids, snap-on lids, also ultra-transparent, with or without a label (IML)
> Use of PP with fillers for higher rigidity and weight
reduction with (CONVINA® PLUS trays)
INJECTION-MOULDING etimex
17
INJECTION-MOULDING FOR COMEDA® PP AND CONVINA® PP BARRIER POTS AND TRAYS
> replacement of metal cans with plastic containers
> including with a flanged lid or side seal
> PP without barriers
> PP with barriers
> (co-injection) plastic containers
> with or without a label (IML)
> use of robots for handling and packaging
CONTACT US TO FIND OUT MORE.
INJECTION-MOULDED POTSINJECTION-MOULDING
18
STANDARD RANGE VITESSA® C-PET AND A-PET READY MEAL TRAYS
You can find several solutions for a variety of appli-
cations with us. Be inspired by the appealing ideas.
VITESSA® C-PET TRAYS
TEMPERATURE RESISTANT FROM -40 °C to +220 °C
AREAS OF APPLICATION
For chilled or frozen ready meals and pasteurized
meals. Preparation in a conventional or a fan oven
and a microwave oven.
VITESSA® C-PET AND A-PET READY MEAL TRAYS etimex
19
VITESSA® A-PET TRAYS
TEMPERATURE RESISTANT FROM - 40 °C TO + 70 °C
AREAS OF APPLICATION
for sensitive products like antipasti, gourmet salads,
dips, spreads and snacks.
VITESSA® A-PET TRAYS WITH BARRIERS
TEMPERATURE RESISTANT FROM - 40 °C TO + 70 °C
AREAS OF APPLICATION
For sensitive products in the refrigerator or in storage
for a limited time at room temperature. Suitable for
use as high-performance oxygen barriers with good
transparency. MAP suitable
Are you seeking solutions for your product?
Then you need to consult our configurator.
www.etimex-pp.com/de/produkte/menuschalen/
VITESSA® C-PET AND A-PET READY MEAL TRAYS READY MEAL TRAYS
TraysArt. no.
Volumein ml
full to the mark
Depth mm
Comment
VITESSA® C-PET & A-PET READY MEAL TRAYS etimex
1161 145 105 x 87 27 no denest
1061
1062
1063
210
240
345
122 x 96
122 x 96
122 x 96
34
40
51
stacking rim
stacking rim
AB denest
1081 270 137 x 94 36 stacking rim
1093
1094
1092
300
360
400
145 x 106
145 x 106
145 x 106
34
44
50
no denest
stacking rim
stacking rim
1660 325 145 x 106 35 AB denest
1600
1601
1602
1603
435
545
500
650
148 x 127
148 x 127
148 x 127
148 x 127
41
45
45
60
stacking rim
AB denest
AB denest
AB denest
1680 340 151 x 111 34 AB denest
1232
1231
400
500
155 x 127
155 x 127
30
40
stacking rim
stacking rim
1420 390 160 x 122 39 AB denest
5060
5061
555
700
160 x 140
160 x 140
47
53
AB denest
with ridges
1531 340 161 x 107 30 AB denest
1464 570 165 x 123 43 AB denest
1795 370 171 x 98 35 AB denest
20
TraysArt. no.
Volumein ml
full to the mark
Depthmm
Comment
1055 425 171 x 127 30 stacking rim
1054
1053
1052
365
550
660
171 x 127
171 x 127
171 x 127
25
40
50
no denest
AB denest
AB denest
1785
1787
1788
510
500
785
171 x 127
171 x 127
171 x 127
35
35
53
AB denest
with ridges
AB denest
1783 650 171 x 127 53 stacking rim
1072
1073
1075
1079
680
750
900
1010
176 x 162
176 x 162
176 x 162
176 x 162
35
40
50
53
no denest
no denest
no denest
AB denest
1184 500 187 x 137 34 AB denest
1182
1188
1180
1189
620
640
730
1055
187 x 137
187 x 137
187 x 137
187 x 137
36
40
45
63
AB denest
AB denest
AB denest
AB denest
1186 420 187 x 137 25 stacking rim
1401 565 188 x 118 37 AB denest
1946
1940
1819
535
735
815
200 x 155
200 x 155
200 x 155
25
36
40
AB denest
AB denest
AB denest
181318121444
6209651100
200 x 155200 x 155200 x 155
304856
AB denest AB denest
stacking rim
1430 800 201 x 154 35 stacking rim
1920 890 202 x 157 40 AB denest
21
READY MEAL TRAYS
TraysArt. no.
Volumein ml
full to the mark
Depth mm
Comment
etimex
1121 680 205 x 110 50 no denest
1360
1363
725
820
208 x 158
208 x 158
32
37
AB denest
AB denest
1171 710 215 x 127 40 no denest
1177
1178
1174
1173
520
850
940
1200
215 x 127
215 x 127
215 x 127
215 x 127
30
50
60
70
no denest
AB denest
no denest
no denest
1581 1010 226 x 176 34 AB denest
1021 1430 226 x 177 50 no denest
1009
1002
1000
1360
226 x 177
226 x 177
36
51
stacking rim
AB denest
1772 1375 226 x 177 51 AB denest
1020 850 226 x 177 31 AB denest
1018 1200 227 x 177 40 AB denest
1671 1030 234 x 184 34 AB denest
1450 1065 235 x 185 33 AB denest
1950
1951
1952
1260
1380
1310
244 x 149
244 x 149
244 x 149
49
55
55
AB denest
AB denest
AB denest
with ridges
22
VITESSA® C-PET & A-PET READY MEAL TRAYS
TraysArt. no.
Volumein ml
full to the mark
Depth mm
Comment
1960
1961
1775
2300
248 x 248
248 x 248
39
50
AB denest
AB denest
5050 1275 263 x 163 47 AB denest
with ridges
5052
5051
1420
1450
263 x 163
263 x 163
48
52
AB denest
without ridges
AB denest
with ridges
1880
1881
2620
3300
290 x 255
290 x 255
50
61
AB denest
AB denest
1755 1980 325 x 176 50 AB denest
1/3 gastro standard
1750
1752
1751
3190
3750
5000
325 x 265
325 x 265
325 x 265
51
60
81
AB denest
AB denest
AB denest
1/2 gastro standard
1630 130 171 x 123 12 no denest
1640 230 212 x 152 14 no denest
1650 465 265 x 190 17 no denest
1930 700 220 x 186 30 AB denest
1270 580 220 x 192 23 stacking rim
4260 180 / 40 = 220 122 x 96 40 APET
stacking rim
1050 235 / 195 = 430 171 x 127 36 AB denest
23
READY MEAL TRAYS
TraysArt. no.
Volumein ml
full to the mark
Depth mm
Comment
etimex
1059 330 / 225 = 555 171 x 127 40 AB denest
1057 440 / 35 = 475 171 x 127 40 no denest
1786 400 / 270 = 670 171 x 127 50 AB denest
1076 250 / 190 = 440 176 x 162 30 no denest
1077 325 / 265 = 590 176 x 162 35 no denest
1078 445 / 405 = 850 176 x 162 53 AB denest
1181
1187
300 / 250 = 550
400 / 335 = 735
187 x 137
187 x 137
36
57
AB denest
AB denest
1191 350 / 290 = 640 187 x 137 45 AB denest
1190 320 / 320 = 640 187 x 137 45 AB denest
1185 405 / 405 = 810 187 x 137 60 AB denest
1815
1945
1817
1944
345 / 345 = 690
415 / 415 = 830
455 / 455 = 910
515 / 515 = 1030
200 x 155
200 x 155
200 x 155
200 x 155
35
45
50
59
AB denest
AB denest
AB denest
AB denest
1443 390 / 265 = 655 200 x 155 36 AB denest
1941 425 / 425 = 850 200 x 155 54 AB denest
24
VITESSA® C-PET & A-PET READY MEAL TRAYS
TraysArt. no.
Volumein ml
full to the mark
Depth mm
Comment
1816
1810
375 / 375 = 750
450 / 450 = 900
200 x 155
200 x 155
40
50
AB denest
no denest
1811 440 / 360 = 800 200 x 155 55 no denest
1814 515 / 515 = 1030 200 x 155 55 AB denest
1431
1433
370 / 370 = 740
450 / 450 = 900
201 x 154
201 x 154
35
45
stacking rim
stacking rim
1361 250 / 195 = 445 208 x 158 32 AB denest
1364 420 / 300 = 720 208 x 158 35 AB denest
1931 480 / 420 = 900 220 x 186 43 AB denest
1932 540 / 460 = 1000 220 x 186 50 AB denest
1582 560 / 380 = 940 226 x 176 34 AB denest
1019 480 / 310 = 790 226 x 177 30 AB denest
1007
1016
600 / 460 = 1060
700 / 525 = 1225
226 x 177
226 x 177
44
52
AB denest
AB denest
1022 460 / 360 = 820 226 x 177 31 stacking rim
1006
1779
440 / 380 = 820
490 / 420 = 910
226 x 177
226 x 177
31
35
AB denest
AB denest
25
READY MEAL TRAYS
TraysArt. no.
Volumein ml
full to the mark
Depth mm
Comment
etimex
1004
1778
480 / 310 = 790
700 / 445 = 1145
226 x 177
226 x 177
30
46
stacking rim
AB denest
1017
1011
1010
450 / 450 = 900
550 / 550 = 1100
605 / 605 = 1210
226 x 177
226 x 177
226 x 177
35
46
51
AB denest
AB denest
AB denest
1775 750 / 165 = 915 226 x 177 35 AB denest
1776 830 / 620 = 1450 226 x 177 61 AB denest
1777 760 / 760 = 1520 226 x 177 65 AB denest
1672 560 / 370 = 930 234 x 184 34 AB denest
1451 625 / 340 = 965 235 x 185 33 AB denest
1453 570 / 390 = 960 235 x 185 34 AB denest
1449 275 / 110 / 110 = 495 200 x 155 26 no denest
1583 400 / 295 / 225 = 920 226 x 176 34 AB denest
4026 295 / 160 / 120 = 575 226 x 177 23 APET
stacking rim
1028 320 / 255 / 155 = 730 226 x 177 31 AB denest
1029 435 / 235 / 170 = 840 226 x 177 35 AB denest
26
VITESSA® C-PET & A-PET READY MEAL TRAYS
TraysArt. no.
Volumein ml
full to the mark
Depth mm
Comment
1001
1003
390 / 200 / 150 = 740
545 / 280 / 210 = 1035
226 x 177
226 x 177
31
46
AB denest
AB denest
1014
1005
320 / 255 / 155 = 730
370 / 305 / 190 = 865
226 x 177
226 x 177
31
35
AB denest
stacking rim
1024
1025
485 / 280 / 180 = 945
560 / 300 / 200 = 1060
226 x 177
226 x 177
41
46
stacking rim
stacking rim
1026 490 / 425 / 245 = 1160 226 x 177 54 AB denest
1673 362 / 263 / 263 = 888 234 x 184 34 AB denest
1674 480 / 230 / 200 = 910 234 x 184 34 AB denest
1452 340 / 280 / 280 = 900 235 x 185 33 AB denest
1454 390 / 265 / 265 = 920 235 x 185 34 AB denest
1105
1107
190
200
95
95
40
48
stacking rim
stacking rim
1106 254 95 52 stacking rim
1740 340 108 60 stacking rim
suitable lid
article 2150
5000 340 124 53 stacking rim
5001 280 124 38 stacking rim
27
READY MEAL TRAYS
TraysArt. no.
Volumein ml
full to the mark
Depth mm
Comment
etimex
1374 280 126 39 stacking rim
1370
1371
1371
1372
290
365
395
430
126
126
126
126
35
44
47
54
stacking rim
stacking rim
stacking rim
stacking rim
1871
1870
435
615
138
138
44
64
stacking rim
stacking rim
1620 155 152 14 no denest
1621 560 152 51 AB denest
1136 280 195 14 no denest
1133
1130
290
320
195
195
15
17
no denest
no denest
1138 630 195 30 AB denest
5131 735 195 35 AB denest
1132 1450 195 70 no denest
1134 1245 195 80 no denest
5130 395 / 395 = 790 195 41 stacking rim
1139 460 / 460 = 920 195 57 stacking rim
28
VITESSA® C-PET & A-PET READY MEAL TRAYS
TraysArt. no.
Volumein ml
full to the mark
Depth mm
Comment
READY MEAL TRAYS
1292 470 212 20 no denest
1295 415 212 20 no denest
1297 470 212 20 stacking rim
1142 490 240 15 no denest
1141
1140
1045
1380
240
240
30
41
no denest
no denest
1560
1563
1562
180
215
250
109 x 95
109 x 95
109 x 95
47
60
65
stacking rim
stacking rim
stacking rim
1570 365 133 x 117 61 stacking rim
1225 385 162 x 126 51 stacking rim
1223
1224
1222
300
350
400
162 x 126
162 x 126
162 x 126
38
43
51
stacking rim
stacking rim
stacking rim
1762
1761
545
660
165 x 150
165 x 150
51
73
stacking rim
stacking rim
1137 970 195 50 stacking rim
1490
1492
530
630
197 x 160
197 x 160
40
50
stacking rim
stacking rim
1330 410 161 x 121 45 AB denest
29
TraysArt. no.
Volumein ml
full to the mark
Depth mm
Comment
etimex
1332 470 161 x 121 55 AB denest
1790 325 168 x 111 33 stacking rim
1702
1701
1700
480
675
870
216 x 148
216 x 148
216 x 148
30
43
58
AB denest
AB denest
AB denest
1703 730 216 x 148 56 AB denest
1350 560 218 x 150 33 no denest
1991
1990
745
1260
240 x 178
240 x 178
31
54
AB denest
AB denest
1340 530 242 x 171 21 no denest
1341 800 242 x 171 40 no denest
1351 250 / 200 = 450 218 x 150 33 no denest
5080
5081
425 / 425 = 850
465 / 465 = 930
220 x 155
220 x 155
47
53
AB denest
AB denest
1992 610 / 400 = 1010 240 x 178 50 AB denest
1830 1250 266 x 178 54 AB denest
1524 555 / 555 / 550 = 1660 285 x 240 50 stacking rim
30
VITESSA® C-PET & A-PET READY MEAL TRAYS
TraysArt. no.
Volumein ml, full to the mark
Depth mm
Comment
2150 108 7 CPET
for article
1740
stacking rim
1525 380 / 345 / 220 = 945 285 x 240 26 stacking rim
1522
1529
280 / 265 / 240 / 160 = 945
320 / 310 / 280 / 185 = 1095
285 x 240
285 x 240
30
32
stacking rim
stacking rim
1520
1526
420 / 400 / 355 / 230 = 1405
455 / 440 / 395 / 260 = 1550
285 x 240
285 x 240
50
52
stacking rim
stacking rim
1523
1521
1527
275 / 265 / 185 / 135 / 90=950
410 / 395 / 220 / 220 / 105=1350
450 / 440 / 245 / 245 / 125=1505
285 x 240
285 x 240
285 x 240
30
50
52
stacking rim
stacking rim
stacking rim
1770 36 x 12 = 432 226 x 177 21 no denest
4111
4110
2180
210
310
-
134 x 100
134 x 100
138 x 104
27
40
11
APET tray
stacking rim
APET lid
stacking rim
OTHER LIDS ARE AVAILABLE ON REQUEST
OUR SPECIAL RANGE OF PRODUCTS FOR VITESSA® A PET AND C PET TRAYS
> Complex geometrical shapes (e.g. reproduction of logos, multi-compartment trays, etc.)
> Multilayer film structure (also multi-coloured) > Ribs to increase stability
> Clamping lid, snap-on lid, also highly transparent
LidArt. no.
Depth mm
Comment
OTHER PUNCHED GEOMETRIC SHAPES ARE AVAILABLE ON REQUEST.
We look forward to developing individually tailored trays that suit your requirements together with you.
31
READY MEAL TRAYS
32
PP AND PP BARRIER READY MEAL TRAYS etimex
COMEDA® PP TRAYS & POTS
Temperature resistant (depending on choice of raw
material) from
> Homo PP: + 2 °C to + 125 °C
> Co PP: - 40 °C to + 125 °C
AREAS OF APPLICATION
For fresh, chilled and frozen ready meals.
Preparation in the microwave oven or bain-marie.
CONVINA® PP BARRIER TRAYS & POTS
Temperature resistant from + 2 °C to + 125 °C;
high-performance oxygen EVOH barrier; aroma pro-
tection and the water-vapour barrier enable a long
shelf life of sterilized meals at ambient.
AREAS OF APPLICATION
For sterilized and pasteurized ready meals. Preparation
in the microwave oven or bain-marie.
33
INJECTION-MOULDING FOR COMEDA® PP AND CONVINA® PP BARRIER POTS AND TRAYS
Many thermoformed products with the same proper-
ties can also be made with injection-moulding.
PP barrier pots in the form of 'plastic containers' can
also be sealed with flanged lids like metal containers,
in addition to film sealing.
STANDARD RANGE
CONVINA® PP BARRIER MENU TRAYSAND COMEDA® PP MENU TRAYS
You can find several solutions with us for a multitude
of applications. Be inspired by the appealing ideas.
READY MEAL TRAYS
TraysArt. no. Art. no.
Volumein ml full to the mark
Depthmm
Comment
PP AND PP BARRIER READY MEAL TRAYS etimex
3086
3087
3088
8086
8087
8088
230
255
300
137 x 93
137 x 93
137 x 93
28
31
38
3490 8490 500 144x105,5 52 AB denest
3540 8540 315 163 x 119 28
3541 8541 430 163 x 119 38
3050 8050 435 171 x 127 30,5 AB denest
3451 8451 335 178 x 117 38 stacking rim
3600 8600 390 180 x 112,5 34 stacking rim
3601 8601 280 180 x 112,5 34 stacking rim
3064
3060
8064
8060
465
610
187 x 137
187 x 137
25
36
3065 8065 880 187 x 137 50 stacking rim
3061 8061 290 / 245 = 535 187 x 137 36
3942
3941
3940
8942
8941
8940
1040
1300
1550
265 x 162
265 x 162
265 x 162
40
50
60
AB, ¼ GN
AB, ¼ GN
AB, ¼ GN
3932
3930
3931
3933
8932
8930
8931
8933
2440
3065
3675
6000
325 x 265
325 x 265
325 x 265
325 x 265
40
50
60
100
AB, ½ GN
AB, ½ GN
AB, ½ GN
AB, ½ GN
34
TraysArt. no. Art. no.
Volumein ml full to the mark
Depth mm
Comment
3551 8551 100 80 31
3288
3280
3550
8288
8280
8550
95
140
145
80
80
80
34
47
50 stacking rim
3287 8287 128 80 43 stacking rim
3292
3295
8292
8295
330
225
93
93
80
62
3470
3470
8470
8471
340
245
95
95
85
56
with ridges
3472 8472 205 95 50
3411
3610
8411
8610
160
205
102
102
30
39
3570 8570 280 125 38 stacking rim
3560 8560 435 138 44
3390 8390 570 148 62
3519 8519 450 180 29
3517 8517 640 180 33
3201 8201 505 180 36
35
READY MEAL TRAYS
TraysArt. no. Art. no.
Volumein ml full to the mark
Depthmm
Comment
PP AND PP BARRIER READY MEAL TRAYS etimex
3515 8515 270 / 190 = 460 180 33
3520 8520 310 / 245 = 555 180 33
3529 8529 320 / 260 = 580 180 36
3516 8516 330 / 180 / 115 = 625 180 38
3162 8162 470 184 32
3160 8160 235 / 200 / 145 = 580 184 39
3210 8210 281 / 202 / 121 = 604 185 x 179 41
3190 8190 330 128 x 118 48
3181 8181 340 138 x 117 54
3136
3135
3134
8136
8135
8134
150
250
300
138 x 117
138 x 117
138 x 117
23
38
48
3185 8185 425 138 x 117 64
3313 8313 500 187 x 156 39 stacking rim
36
OTHER PUNCHED GEOMETRIC SHAPES AVAILABLE ON REQUEST
37
OUR SPECIAL RANGE OF PRODUCTS FOR COMEDA® AND CONVINA®
> Complex geometric shapes (e.g., reproduction of logos, multi-compartment trays, etc.)
> Multi-layered film structure (also multi-coloured)
> Ridges to increase stability
> Clamping lids, snap-on lids; also transparent
We look forward to developing individually tailored trays that suit your requirements with you.
ALL INFORMATION IS SUBJECT TO CHANGE.
READY MEAL TRAYS
38
APET PP (Homo) PP (Copolymer) PP-EVOH-PPCPET
MATERIAL PROPERTIES AND AREAS OF APPLICATION FOR PLASTIC TRAYS
Temperature range - 40 °C to + 220°C - 40 °C to + 70 °C + 2 °C to + 125 °C - 18 °C to + 125 °C + 2 °C to + 125 °C
-40 °C on request
Heating fan oven - microwave oven microwave oven microwave oven microwave oven bain-marie bain-marie bain-marie
conventional oven
Density (g/cm³) 1,35 1,33 0,91 0,91 0,95
Colours white transparent white white ivory / white,
(special colours on request) black black black white, black
contact-transparent natural contact-transparent
Areas of application chilled, frozen chilled chilled chilled, frozen sterilized
pasteurized ready meals ready meals ready meals pasteurized
ready meals ready meals
Storage at room temperature
Sealability Sealable with all of the well known sealing films
QUALITY MANAGEMENTetimex
CPET APET PP PP-EVOH-PP
CO2 carbon dioxide cm³ x 100 μm 55 - 65 100 - 120 2000 - 3000 1.7 - 10.8
m² x 24 h x bar
O2 oxygen cm³ x 100 μm 15 - 20 25 - 30 520 - 800 0.3 - 2.2
m² x 24 h x bar
N2 nitrogen cm³ x 100 μm 4 - 5 6 - 9 150 - 200 0.1 - 0.5
m² x 24 h x bar
H2O water vapour g x 100 μm 1.8 - 2.2 2.2 - 2.5 0.5 - 0.7 1.0 - 1.4
m² x 24 h
TESTING CONDITIONS
> The gas permeability has been measured according to DIN 53380 for a 100 μm thick film at 50 % relative humidity.
> The water-vapour permeability has been measured according to DIN 53122 for a 100 μm thick film at 85 %
=> 0 % gradient of moisture.
> The permeability values for the PP-EVOH-PP laminated film refer to a multi-layer film with a 25 μm thick EVOH layer.
THE PERMEABILITY VALUES FOR THE INDIVIDUAL TRAYS ARE MEASURED AS FOLLOWS
Gas permeability (CPET, APET, PP): tabular value x surface of the tray in m² x 100
average wall thickness of the tray in μm = [cm³/(tray x 24 h. x bar)]
Gas permeability (PP-EVOH-PP): tabular value x surface of the tray in m² x 25
average layer thickness of EVOK in the tray in μm = [cm³/(tray x 24 h. x bar)]
Water-vapour permeability tabular value x surface of the tray in m² x 100
(CPET, APET, PP, PP-EVOH-PP): average wall thickness of the tray in μm = [g/(tray x 24 hr)]
PLASTIC FILM & TRAY PERMEABILITY VALUES
QUALITY MANAGEMENTQUALITY MANAGEMENT
39
etimex-pp.com
STAND 01.2017
DESI
GN
& C
OPYR
IGH
T BY
CM
D-CR
OSSM
EDIA
.COM
© 0
1.17
PHOT
OS: C
HAN
DLER
PHOT
OGRA
PHY,
FOT
OLIA
, DIR
K RO
TH, i
STOC
K ETIMEX PRIMARY PACKAGING GMBHMartin-Adolff-Straße 44
89165 DietenheimGERMANY
TEL +49 (0) 73467-0 info@etimex-pp.com
YOU
R ID
EAS.
OU
R SO
LUTI
ON
.
SALES & MARKETING AREAS
TRAYS & POTSTEL +49 (0) 7347 67-437 trays@etimex-pp.com
THERMOFORMING FILMS TEL +49 (0) 7347 67-431 sheets@etimex-pp.com
FLEXIBLE FILMS TEL +49 (0) 7347 67-414 flexibles@etimex-pp.com
PHARMACEUTICAL FILMS TEL +49 (0) 7347 67-451 info@purelay.de
EVERYDAY & EVERYWHEREPRIMARYPACKAGINGetimex
ETIMEX PRIMARY PACKAGING & ETIMEX TECHNICAL COMPONENTS are business entities of the independ-ent ETIMEX HOLDING company.
You can obtain further information from:www.etimex.de
SALES & MARKETING OFFICES
GREAT BRITAINUK@etimex-pp.com TEL +44 (0) 20 8688 7770
GERMANY, AUSTRIA, SWITZERLAND AND LIECHTENSTEIN (D-A-CH)D-A-CH@etimex-pp.comTEL +49 (0) 173 30 18 293
FRANCEFrance@etimex-pp.comTEL +33 (0) 4 74 43 25 20
BENELUXBenelux@etimex-pp.comTEL +49 (0) 7347 67-435
ITALYItaly@etimex-pp.comTEL +49 (0) 73 47 67-431
SPAINSpain@etimex-pp.comTEL +34 (0) 609 350 791
POLANDPL@etimex-pp.comTEL +48 (0) 601 68 83 72
top related