presentation on “pressure, manometers,bourdon gauges and load cells

presentation on “Pressure, Manometers,

Bourdon Gauges and load cells”

Presented By:

Shaik Afzal Mohiuddin15011D1009

2

ABSOLUTE, GAUGE, ATMOSPHERIC AND VACUUM PRESSURES

The pressure on a fluid is measured in two different systems.Absolute pressure: is defined as the pressure which is measured with reference to

absolute vacuum pressure.2. Gauge pressure: is defined as the pressure which is measured with the help of a

pressure measuring instrument, in which the atmospheric pressure is taken as datum. The atmospheric pres sure on the scale is marked as zero.

3. Vacuum pressure: is defined as the pres sure below the atmospheric pressure.Note. (i) The atmospheric pressure at sea level at 15°C is 101.3 kN/m2 or 10.13 N/cm2 (ii) The

atmospheric pressure head is 760 mm of mercury or 10.33 m of water

3

MEASUREMENT OF PRESSURE

The pressure of a fluid is measured by the following devices :2.5.1 Manometers. Manometers are defined as the devices used for measuring the pressure at a

point in a fluid by balancing the column of fluid by the same or another column of the fluid.

They are classified as:(a) Simple Manometers, (b) Differential Manometers. 2.5.2 Mechanical Gauges. Mechanical gauges are defined as the devices used for measuring, the pressure

by balancing the fluid column by the spring or dead weight.

The commonly used mechanical pressure gauges are :(a) Diaphragm pressure gauge, (b) Bourdon tube pressure gauge,(c) Dead-weight pressure gauge, and (d) Bellows pressure gauge.

4

SIMPLE MANOMETERS

A simple manometer consists of a glass tube having one of its ends connected to a point where pressure is to be measured and other end remains open to atmosphere.

Common types of simple manometers are :

1. Piezometer. 2. U-tube Manometer. 3. Single Column Manometer.

Piezometer

•

Pr at A = gh N/m²⍴

U-tube Manometer

• It contains two liquids

• Let A be the point whose pressure is to be measured.h1 = Height of light liquid above the datum lineh2 =Height of heavy liquid above the datum line

₁ ⍴ =Density of light liquid =1000*S₁₂ ⍴ =Density of heavy liquid =1000*s₂

As the pressure is the same for horizontalSurface. Hence Pressure above the horizontaldatum line A-A should be same in both columns.Pressure above A-A in the left column=p+ ₁ *g* h1⍴Pressure above A-A in the left column= 2 *g* h2⍴ Hence equating the two pressuresp+ ₁ *g* h1 = 2 *g* h2 ⍴ ⍴P=( 2 *g* h2 - ₁ *g* h1 )⍴ ⍴

8

Single Column Manometer

Vertical single column Manometer• It is a modified form of U-tube manometer.• It contains reservoir.• Change in liquid level is very small in the

reservoir.

Inclined single column Manometer• It is more sensitive• Distance moved by the heavy liquid in the

right limb will be more.

10

DIFFERENTIAL MANOMETERS

U-tube Differential Manometer.

• It is used for measuring the difference of pressures between two points in a pipe or in two different pipes.

• It consists of a (i) U-tube (ii)Heavy liquid• Difference of pressure at A and B is given by =h*g(⍴g - ₁ )+ ⍴ ⍴2gy- ₁gx ⍴Where ⍴g = Density of heavy liquid or mercury y=Distance of the center of B, from the mercury level in the right limb x=distance of the centre of A, from the mercury level in the right limb

C-type Bourdon tube

Spiral type bourdon tube

Spiral type bourdon tube

Helical type Bourdon tube

Ranges of different types of bourdon tubes

• C- type bourdon tube elements 0-700 mega Pascal & even higher.

• Spiral type bourdon tube elements 0-30 mega Pascal.

• Helical type bourdon tube elements 1.5 mega Pascal to 550 mega Pascal.

Load cells

18