presentation icts 2009
Post on 21-Jun-2015
436 Views
Preview:
TRANSCRIPT
A Survey On Outdoor Water Hazard Detection
Mohammad IqbalOlivier Morel
Fabrice Meriaudeau
Agenda
Introduction : Location, Motivation, Water Appearance, A Variety outdoor Water Hazard Scene.Water detection method : Color Imagery, Short Wave Infra red (SWIR) Imagery, Thermal Infra red Imagery, Laser Range Finder, Multi feature based and Polarization Imaging basedClassification Scheme of method water detection
Location
Gunadarma University, Indonesia Simple Information :25.000 students and 1000 lecturers9 campus locations12 bachelor , 6 master and 2 PhD programsinternal news, radio and TV stationEach department of each faculty atGunadarma University haslaboratories that have divisions: Basic, Intermediate and AdvanceLaboratories. The laboratories are facilities for students as supportingrequirment for some subjects that thestudents receive during the class.
www.gunadarma.ac.id
Location
Université de Bourgogne, FranceSimple Information :
27,000 students divided into six city, Dijon, Auxerre, Chalon-sur-Saône, Le Creusot, Mâcon and Nevers. The Humanities and Sciences are well represented on the main campus along with Medicine and Literature in separate buildings. The IUT (Institute of technology) is also on the campus, providing specialist higher level diplomas in Business, Biology, Communications and Computer Science.
Lab LE2I IUT (Institut Universitaire de Technologie), Le Creusot
webcreusot.u-bourgogne.fr
12, Rue Fonderie71200 Creusot (Le), France+33 3 85 73 10 00
Motivation
Autonomous off-road navigation is a highly complicated task for a robot owing to the different kinds of obstacles it can encounter.
Water hazards such as puddles and ponds are very common in the outdoor environment and are hard to detect even with ranging devices such as LADAR as the signal does not get reflected back to the sensor.
Water Appearance
Ambient light (day versus night operation)Scene elements reflected by the surface (sky, vegetation or buildings)Width of surface water (a pond versus a lake)Water depthWater turbidity and presence or absence of ripples on the surface or shadow
A Variety outdoor Water Hazard Scene
brighter intensities where the sky is reflected, darker intensities where the water is in shadow, and reflections of ground cover that are close and far away.
changes in illumination along the body of water and are not clearly
distinguished from the surrounding terrain.
Image from the DARPA 2004 Grand Challenge media galle
Image from Matthies, BelluttaImage from Matthies, Bellutta
Big Challenge on Water Detectionto formulate a single feature capable of characterizing water under the different
scenarios
Water Detection Method
Color ImageryShort Wave Infra red (SWIR) ImageryThermal Infra red ImageryLaser Range FinderMulti feature basedPolarization Imaging based
Color Imagery
Color classification for rippled water
Result :
Color classification for still water
Image Processing : Saturasi (left), brighness (right)
Source :
Evaluate the brightness [I = (R+G+B)/3] and color
saturation [1- min(R,G,B)/I]of the terrain, water, and
sky
If [S=0] or [S ≤ 0.27 and B ≥ 0.73] or [sky and S ≤ 0.1 and B > Bmin(S)] or [sky and S ≤ 0.3 and B > Bmin(S) and 240<H<285]
The thresholdingcriteria derived for labeling a pixel a water cue from color
S = Saturation, B=Brightness, H=Hue
Color Imagery
During the day, colour image classification can be used to recognize water by its reflection of the sky; in off-road, open terrain, this is a fairly reliable, easy-to-compute signature. On the other hand, when still water reflects other aspects of the terrain, such as trees, hills, or buildings, it may be particularly difficult.
This method usually combine with texture detection of water. texture quantifies grayscale intensity differences (contrast), a defined area over which differences occur, and directionality, or lack of it (Haralick, 1973). For this water cue, water regions having low texture.
Short Wave Infra Red (SWIR) Imagery
Basic Principal : Analysing image of it deepness Infra red Sensor
As the absorption coefficient of pure water in the near infrared wavelengths is higher than that in the visible range, water bodies of any appreciable depth will appear very dark in the near infrared imagery.
Ability of SWIR cameras with wavelength sensitivity from nearly 0.9 to 1.7 μm
Short Wave Infra Red (SWIR) Imagery
Fact from SWIR : Snow and ice have very strong absorption beyond about 1.4 μm therefore the wavelength region around 1.5 μm to 1.6 μm may be useful for recognizing water, snow and ice.
Result : The water is very dark at the bottom of the image where it reflects the sky; the angle of incidence at that point is at least 80 degrees.
Beyond that, strong reflections of clouds and trees are evident on the water surface. Note that the vegetation all around the reservoir is highly reflective at these wavelengths.
SWIR is capable of detecting water at moderate angles of incidence and has the potential to discriminate snow and ice from other terrain materials. But the performance of this technique degrades in regions of water strongly reflecting vegetation or the clouds.
Thermal Infra red ImageryWater Appearance from operating
time detection (day or night)
The water bodies tend to be cooler than surrounding terrain during the day and warmer at night.
The size of water body will be affected to the temperature distribution and smaller bodies equalize temperature quickly while there is significant contrast for larger bodies of water.
Moreover, water has a higher emissivity than other terrain materials and hence, improves the contrast during night.
Ability of Thermal Camera (Mid-wave IR - MWIR) withwavelength sensitivity from
nearly 3.5 to 20 μm
Water bodies have a thermal region distribution region around 3 to 5 μm and other gases in the atmosphere restricts aerial systems 8 to 15 μm.
Thermal Infra red ImageryWe can use thermal images of water measures only on the very top layer of the water surface because those wavelengths are attenuated/absorbedvery rapidly.
In the water content, this is will makes confusing results sometimes, unless you know for certain what covers the area you are looking at or have very precise control of the wavelengths sensed by the instrument (which makes in expensive).
Most thermal imaging systems have strict technical parameters, for example, detector materials must be kept extremely cold during use (because the emitted radiation being sensed is very weak)
Result Water Detection with Thermal IR taken at 3 pm (left) & 4 am (right)
Laser Range FinderA LADAR system works by firing photons (lasers) at a given object or area, it then measures the time of flight of photons (time to reflect back), this enables a CCD style setup to encode each photon as a pixel and produce a 3D image of the object or area.
The water bodies can return signals for robot mounted LADAR ranging systems owing to the specular reflection at the air water interface.
It has been suggested that some of the LADAR energy penetrates the interface and could even produce a range measurement of the bottom of the water body depending on the angle of incidence
LADAR System
Laser Range Finder
LADAR has been concluded for detecting water body within short ranges of shallow water bodies. The visible and near infrared LADAR may provide a return value and could be used in detection and depth measurements.
Scene elements within certain range (between 6.5 and 11 metres), provide return values could be used to characterise water. Beyond this limit, no return signal is obtained from any object and hence, it is mean not possible to detect water hazards.
For detecting the presence of water body, LADAR system need careful installation, depend on time operation (day or night), and the precision angles of incident laser beam to water bodies object.
Multi feature basedA lot of scene of water body in outdoor environment, bring the idea to researchers to combine various techniques to detect the water.
The technique employs brightness, texture and range reflection features that are fused to detect water hazards. [9]
The brightness and texture cues Extracted by common image segmentation methods such as region growing and clustering.
Find a parameter the 3D InformationUse an NCC (normalized cross correlation criteria) based stereo matching method.
Features are fusedto detect the water regions in the scene
Brightness textures
Multi feature based
The multi-cue approach allows each detector to target different water characteristics.
A certain amount of false detections from each detector is tolerated by applying fusion rules that are, in part, designed to eliminate false detections.
Generally, this technique have a better results than any technique based on a single feature. But, to apply this approach we need found many task to formulating a robust fusing scheme capable of accommodating the different factors influencing the appearance of a water body.
This is will increase a computational overhead, hence it will complicate their use in real time applications.
Polarization Imaging based
This technique based on the physical principle that the light reflected from water surface is partial linearly polarized and the polarization phases of them are more similar than those from the scenes around. Water hazards can be detected by comparison of polarization degree and similarity of the polarization phases. Two step :
I0, I45 and I90 is a representation of intensity image measurements that are taken at 0, 45 and 90 degrees of polarizer lens.
1. Extraction of polarization imaging information
Polarization Imaging basedExtraction of polarization imaging information result :
(Binxie, 2007) Degree of Polarization Phase of Polarization
2. Segmentation polarization image
Degree of Polarization Phase of Polarization
self-adaptive threshold segmentation algorithm
and a morphology filtering technique to
label water region
Classification Scheme of method water detection
top related