preconditioned air unit - zephir - adelte air unit - zephir preconditioned air unit point-of-use /...
Post on 08-Mar-2018
223 Views
Preview:
TRANSCRIPT
R-410ARefrigerant
QuietOperation
Direct Access Design
ScrollCompressors
Preconditioned Air Unit - ZEPHIRPreconditioned Air Unit Point-of-Use / Stand or Bridge Mounted
The flexible way to deliver preconditioned air, offering high efficiency in handling operations for all types of aircrafts
AHM 650 (IATA) - Potable Water Servicing
AHM 902 (IATA) - Environmental impact on the use of GSE
AHM 910 (IATA) - Basic requirements for aircraft GSE
AHM 913 (IATA) - Basic safety requirements for aircraft GSE
AHM 922 (IATA) - Basic requirements for PBB Aircraft Interface
AHM 973 (IATA) - Functional specification for a towed aircraft ground heater
AHM 974 (IATA) - Functional specification for aircraft air conditioning unit
AHM 1002 (IATA) - Environmental impact on the use of GSE
Ease of installation
Zephir PCAs are point-of-use units which can fit any layout platform and can be installed on any passenger boarding bridge. They are available in both ground-mounted and bridge-mounted configurations and are prepared to be connected to a centralized management system.
Superior passenger comfort
Conceived to provide passengers with an outstanding experience, Zephir PCA uses G4 filters (F5 to F9 filters optional) to supply high quality air inside the aircraft and reinforced thermo acoustic insulation for significant noise reduction.
High efficiency and low operations costsZephir Series are designed and engineered to deliver optimum airflow to each aircraft, using four compressors four phases and high efficiency direct drive centrifugal blower (VFD), while consuming the minimum energy.
Environmentally-friendly refrigerantsZephir PCA uses R-410A refrigerant which respects the environment and the future generation to come. Its high efficiency significantly reduces refrigerant load and CO2 emissions.
Smart PLC control
Zephir PCA is designed according the latest technologies. The PLC can be accessed remotely o via its user-friendly touch screen interface allowing operators to control all parameters of the PCA during operations, monitoring or maintenance phases.
Durability and ease of maintenance
Quality is a must. All components are designed, manufactured and tested in order to offer a service life of at least 15 years. Maintenance tasks can be carried out fast and easy on any component inside the unit thanks to ADELTE’s direct access design. Remote maintenance and monitoring are available to enhance PCA operations.
Key Features
R-410ARefrigerant
ScrollCompressors
Direct Access Design
QuietOperation
Preconditioned Air Unit - ZEPHIRThe ZEPHIR Series provide an efficient, flexible and reliable way to deliver high quality preconditioned air, for all types of stationed aircraft in all climatic conditions
Technical Specifications
ZEPHIR320/120
ZEPHIR270/100
ZEPHIR210/80
ZEPHIR160/60
ZEPHIR120/45
ZEPHIR90/35
318 kW
120 Tn
4 150 kg
167 kW
266 kW
100 Tn
3 800 kg
140 kW
212 kW
80 Tn
3 450 kg
107 kW
160 kW
60 Tn
3 100 kg
80 kW
125 kW
46 Tn
2 550 kg
60 kW
93 kW
35 Tn
2 250 kg
44 kW
Cooling Capacity (*)
Compressor Capacity (**)
Number Compressors / Stages
Length
Width
Height
Weight
Maximum Air Flow
Available Static Pressure
Discharge Temperature
Power Supply
Total Consumption (*)
Refrigerant
Sound level at 4.6m.
ADELTE’s PCA unit is specially designed for heating and cooling all types of aircrafts and for providing maintenance personnel fast and easy access to all components.
Mounted door Condensation Fan for easy access maintenance operations
PCA Hose Connection
Secondary Electrical Cabinet
Main Electrical Pannel
AIR OUTLET FOR HEAT DISSIPATION
AIR OUTLET FOR PRE CONDITIONED AIR OF THE AIRPLANE
AIR INLET FOR DISSIPATION
AIR INLET FOR PRE CONDITIONED AIR OF THE AIRPLANE
AIR INLET FOR DISSIPATIION
Axial & helicoidal Fan
Heat ExchangerGrill Protector(optional)
4/4
1.62 m
2.17 m
-2 ºC to +2 ºC
400 V/3/50 Hz (***)
6 300 Pa 8 500 Pa 10 000 Pa
4.30 m
<85 dBA<80 dBA
5.80 m 6.60 m
PCA operation temperature with R-410A: -40ºC to +46ºC
Optional heating resistors available for lower ambient air temperature (*) at design conditions per ARI/ASHRAE 35 °CDB / 26 °CWB with refrigerant R-410A.
(**) Nominal tons 60 Hz.
(***) other voltages/frequency possible.
(****) other refrigerant (R-134a) is possible. (R-134a refrigerant operation range temperature is: -40 ºC to +55 ºC)
R-410A (****)
200 kg/min150 kg/min80 kg/min
C/ Buenos Aires, 1 08029 Barcelona, SpainPhone: +34 902 300 601 / +34 933 632 294Fax: +34 933 638 295
E-mail: info@adelte.com www.adelte.com
facebook.com/adeltegroup linkedin.com/company/adelte-grouptwitter.com/adelte Follow ADELTE Group:
About ADELTEADELTE provides engineering know-how and result-driven solutions for the world’s leading international airports. From advanced boarding bridges and terminal solutions that deliver a better experience for passengers, to innovative ground support equipment and airport global services to improve performance on the apron, ADELTE is focused on working closely with its partners to enhance airport operations worldwide.
ADELTE takes your airport to the next level.
Associate Member of:
WORLD BUSINESSPARTNER
Standards & RegulationsADELTE’s engineering solutions comply with the following Standards and Regulations, where applicable: The QR code links
directly to this brochure
2202
17 -
Spe
cific
atio
ns a
re s
ubje
ct to
cha
nge
with
out p
rior
notic
e an
d ar
e no
t con
trac
tual
AHM 650 (IATA) - Potable Water Servicing
AHM 902 (IATA) - Environmental impact on the use of GSE
AHM 910 (IATA) - Basic requirements for aircraft GSE
AHM 913 (IATA) - Basic safety requirements for aircraft GSE
AHM 922 (IATA) - Basic requirements for PBB Aircraft Interface
AHM 973 (IATA) - Functional specification for a towed aircraft ground heater
AHM 974 (IATA) - Functional specification for aircraft air conditioning unit
AHM 1002 (IATA) - Environmental impact on the use of GSE
EN Standards
NFP 415 - 2016
EN 12312-4 - Passenger Boarding Bridges
EN 12312-12 - Potable Water Service
EN 12312-17 - Air conditioning equipment
EN 12312-20 - Electrical ground Power Units
Electromagnetic Compatibility (EMC) – (89/23/CEE)
UNE-EN 1915-1:2013 - Aircraft ground support equipment.
General requirements. Basic safety requirements
top related