precast panels design, casting, iowa prestressed concrete, ordean johnson, craig brown, darrel...

1

Precast Panels Design, Casting, Placement

January 25th, 2008Ames, Iowa

Presented by:Dean Bierwagen, Methods Engineer,

Office of Bridges and Structures, Iowa Department of Transportation

Acknowledgement

• Iowa DOT –Norm McDonald, Gary Novey, Ahmad Abu-Hawash, Thayne Sorenson., Mark Dunn, Wayne Sunday, Brian Worrel.

• FHWA -Curtis Monk, Max Grogg

• Bridge Engineering Center at ISU -Mike LaViolette, Doug Woods, Brent Phares

• The Transtec Group, Dave Merritt

• Iowa Prestressed Concrete, Ordean Johnson, Craig Brown, Darrel Olynick

• Dixon Construction

Overview

• Project

• Plans

• Precasting

• Construction

• Summary

2

IA Highway 60 over Floyd River (O'Brien County)

Bridge Description

Panel Layout

3

Panels

• 12 inches thick

• Skewed panel at abutment

• 14 ft x 20 ft

Properties

• fc = 7,000 psi (5000 psi required)

• Precast w/ mild reinforcing

• 1 inch diameter PT ducts ~ 2 ft spacing

• 0.6 in diameter strands, 75% of 270 ksi ~ 40 kips/strand

Post-tensioning Layout

4

End Connection

Blockout Plan

Transverse Keyway

5

Longitudinal Joint

Longitudinal Joint

Casting of Panels

6

7

Panel Fit Up Test

• Check PT alignment

• Keyways

8

Panel Field Placement

9

10

11

12

Grouting PT and Underslab

13

14

Summary

• Reinforcement around pocket

• Longer pocket (longitudinal)

• Keyway issues (Steel Forms)

• Detail between slab joints (neoprene doughnuts)

Summary (Cont.)

• Metal PT ducts

• Provided funds for mockup

• More / early involvement of precasters and post-tensioning industry

• Repair methods in place

15

Future Work

• Under Traffic

• W/ precast approach slab support

• Pavement Projects