powerplant compliance - quality council of india
Post on 17-Feb-2022
0 Views
Preview:
TRANSCRIPT
Mr. Lokendra Singh Chauhan
Scientist-D
Bureau of Indian Standards
QUALITY COUNCIL
OF INDIA
Powerplant Compliance
30 December 2020
Online Training Program for
RPAS Certification Scheme
Section 3 : Powerplant Compliance
Types of Powerplants used in RPAS:
a) Powerplant (Engine Operated)
b) Powerplant (Battery Operated)
Section 3: Powerplant Compliance
:
Flow Diagram of Engine Operated Powerplant
Section-3 : Powerplant Compliance
:
Flow Diagram of Battery Operated Powerplant
Section 3: Powerplant Compliance
:
Battery Operated RPAS
Compliance Criteria for Engine Operated RPAS
As per Clause 3.1
a) Fan blade can withstand ultimate load of 1.5 times the centrifugal force resulting from operation
b) Engine installation is such that it prevents excessive vibration from any part
c) Exhaust is firmly mounted to the structure and free from any obstructions
d) No fuel leak in the system under pressure during operational tests on ground
Compliance Criteria for Battery Operated RPAS
AS per Clause 3.1
a) Safe cell temperatures and pressures are maintained during charging / discharging cycle
b) No explosive or toxic gases are emitted in normal operation
c) No corrosive fluid is discharged which may damage the surrounding structures / equipment
Types of Batteries used in Battery Operated RPAS
Secondary Cells / Batteries of Nickel Systems
Or
Secondary Cells/ Batteries of Lithium Systems
Both types of Cells/Batteries are Under Compulsory Registration Scheme of Bureau of Indian Standards (BIS) as Notified by Ministry of Electronics & IT (MeitY)
Indian Standards (IS) / International Standards (IEC) for Batteries used in RPAS
Nickle System Batteries shall be BIS Registered as per compliance of following Standard:
IS 16046 (Part 1):2018 /IEC 62133-1:2017
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid
Electrolytes — Safety Requirements for Portable Sealed Secondary
Cells and for Batteries Made from Them for Use in Portable
Applications: Part 1 Nickel Systems
Indian Standards (IS) / International Standards (IEC) for Batteries used in RPAS
Lithium System Batteries shall be BIS Registered as per compliance of following Standard:
IS 16046 (Part 2):2018 / IEC 62133-2:2017
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid
Electrolytes — Safety Requirements for Portable Sealed Secondary
Cells and for Batteries Made from Them for Use in Portable
Applications : Part-2 Lithium Systems
Availability of NABL Accredited & BIS Recognized Labs
Nickle System Cells / Batteries - 32 Labs
(as per IS 16046 (Part 1):2018 /IEC 62133-1:2017)
Or
Lithium System Cells / Batteries - 32 Labs
(as per IS 16046 (Part 2):2018 / IEC 62133-2:2017)
Section-3 : Powerplant Compliance
Testing on Nickle System Batteries :
(As per IS 16046(Part-1):2018/ IEC 62133-1:2017)
• Vibration Test
• Case Stress Test
• Temperature Cycling Test
• External Short Circuit Test
• Free Fall Test
• Mechanical Shock Test
• Overcharge Test
Section-3 : Powerplant Compliance
Testing on Lithium System Batteries :
(As per IS 16046(Part-2):2018/ IEC 62133-2:2017)
• Case Stress Test
• External Short Circuit Test
• Free Fall Test
• Vibration Test
• Mechanical Shock Test
• Overcharge Test
Section 3: Powerplant Compliance
Availability of BIS Registered manufacturers for Cells / Batteries:
Nickle System Cells / Batteries
as per IS 16046 (Part 1):2018 /IEC 62133-1:2017 - 82
Or
Lithium System Cells / Batteries
as per IS 16046 (Part 2):2018 / IEC 62133-2:2017 - 1473
As per old version of Standard IS 16046:2015 - 1104
15
Cells / Batteries registration
OEMs of Cells / Batteries can visit BIS website for registration of Models of respective Cells / Batteries
www. bis.gov.in
BIS Portal for registration : crsbis.in
16
Thank You
top related