powering iot devices - miothk.com · focus in iot power devices and frontend modules since 2017...

Powering IoT Devices

MIoT LimitedThe member company of Incu-Tech ProgrammeHong Kong Science and Technology Park

Focus in IoT Power Devices and Frontend Modules since 2017

Fabless design house and Electrical solution providerMaking Integrated Circuits (IC) and Electrical ModulesProviding the IoT solution with modules

Design Teams & Key PartnersIC design . RF application . Module making . Solution provider

A team of leading technologists from the former government agency and the US semiconductor company with over 20 years of R&D experience.in liaison with the top university for the Government’s smart-city project

Key partners in the IoT solutionSoftware and Cloud with RemotecMCU with DragonchipDistribution channel with Tachibana Sales

Green AC Appliances : ProblemLow AC Standby Power & Energy Star with Wireless Radio

AC appliances shall earn a Green label (e.g. Energy Star & IEC62301)for energy saving and low standby power consumptionStandby power standard scoring from 0.5W down to 0.03W

Infrared (IR) remote control easily achieve Energy Star low standby < 0.5WWireless radio is not easy. In standby, radio still consumes power

Wireless Receiving AC/DC power

Bluetooth 5 ~ 30 mA > 1W

Wi-Fi 70 ~ 150mA > 1W

LoRa 10 ~ 20mA > 1W

Infrared (IR) 0.3 ~ 1mA 0.3W

Our Key Technology - XsP AC Direct to DC Power with LDO for Green Standby

Conventional power supplies are not optimized for sub 100mA consumption in terms of energy efficiency and standby power.

With our novel technology, XsP Xtra Small Power (patent pending) supply wireless radio devices or IoT devices for < 50mA at the high efficiency, with no transformer/inductor and no switching element for good EMI

Technology Efficiency at sub 100mA Standby with Radio

XsP AC direct to DC 70% (at 50mA) 0.1W ~ 0.15W

Conventional SMPS flyback < 20% > 1W

Conventional SMPS buck < 40% > 0.5W

XsP Products AC Direct to DC Power with LDO for Green Standby

High performance AC to DC power supplies for wireless radio or IoTin form of ICs, power supply modules and AC power Bluetooth modules

Products Application

IC chipMU1001

AC power MCU, wireless and IoT devicesPower 3V-50mA

Power supply moduleXSP1001

Plug-in power supply for Bluetooth or LoRa to AC machinesGood EMI performance

AC power BLE modulePnP1001

Plug-n-play Bluetooth BLE to AC appliancesGood EMI performanceGreen Standby with radio < 150mW

Benefitsfor designers and manufacturers of AC electrical appliances

for designers with IC MU1001easy Energy Star easy EMI compliancehigh efficiency, low noise and low ripple for wireless radio

for manufacturers with Module XsP1001 and PnP1001low cost with XsP1001(40% cheaper as compared with DIODES AL17050 Buck PCBA)plug-n-play and shorter product development timefit into many retrofit appliances without change of the model shapesecured Green label for low standby power consumptioncloud-ready remote control application empowered by Remotec

User Case StudyPnP1001 AC power Bluetooth module plugged into a fan directly

User Case StudyPnP1001 AC power Bluetooth BLE module plugged into a fan directly as a retrofit

PnP1001 BLE

PnP1001 Bluetooth Fan Retrofitenables the conventional fan with both Infrared and Bluetooth remote control over App and Cloud without major changes

cloud-basedIR code Library

directlyplug into the body

share same AC wire harness

Internal IR extender

Bluetooth mobile App control

PnP1001 BLE

Product SpecificationsMU1001 , XsP1001 , PnP1001

MU1001 & XsP1001High efficient AC direct to DC + High accuracy low ripple Vout

IC : MU1001Power Module : XSP1001

AC to DC 1.8V~3.3V max 50mA (MU1001) or 30mA (XSP1001) Output 3V Vout Accuracy <1%3V ripple <10mVNo switching noise and good EMI performanceNo AC noise to VoutCapacitive isolation from AC linesGood efficiency above 70%Green standby < 150mW with Bluetooth BLE

XsP1001

MU1001

AC power input

MU1001AC to DC with LDO

Cloud-base IR code library

Bluetooth

Temp sensor IR extender EMI and noise free

PnP1001Plug-n-play AC power Bluetooth module

No switching elementNo EMI Filter

No AC noise coupledNo LDO no ferrite bean

MCUBluetooth

Sensors

MU1001

Good EMI and No Noisewithout switching elements

direct wire harness AC motor system

On-off / Speed control

MU1001

< 150mWwith Radio

Direct plug into any AC systemfor Green standby power consumption

Performance data

Product Comparisonagainst conventional SMPS flyback and buck power supplies

Advantage over SMPS Flybackagainst TRACO POWER TMPS05 5Watt

XsP’s ProsLower ripple 10mVLower standby power <100mWHigher efficiency in light low condition <50mA(Flyback efficency at 50mA < 50% + dropoff with 5V-3V LDO)Good EMI performanceNo audio noiseSmaller in sizeMuch cheaper

XsP’s ConsNot better isolation400V vs 3750V

Advantage over SMPS Buckagainst DIODES AL17050 60mA

XsP’s ProsLower ripple 10mVLower standby power <100mWHigher efficiency in light low condition <50mA(Buck efficency at 50mA < 50% + dropoff with 5V-3V LDO)Good EMI performanceNo AC noise to outputCapacitive isolationCheaper

XsP’s ConsSizeVout range

MIoTMU1001 / XsP1001

TRACO TMPS05 Flyback

DIODES AL17050 Buck

Power 3V 50mA for MCU & Bluetooth

Power 5V 1A for general purpose

Power 200mW 60mA for MCU & Bluetooth

Green standby power with Bluetooth150mW < Energy Star

Standby >300mW at no loadGuess >0.5W with wireless

Standby with wireless device> 0.2W

Low output ripple 10mVwith internal LDO

Output ripple 60mV High ripple >100mV

High output accuracy ±1% High line and load regulation 1%

Output accuracy ±2% Line and load regulation 1%

low accuracy depending on external components

No switching noiseperfect EMI without filters

50KHz ~100KHz switchingneed EMI filter

70KHz switchingneed EMI filter

No AC noise at outputperfect for wireless and sensor

AC noise at ouputneed extra LDO and ferrite

AC noise at ouputneed extra LDO and ferrite

Smaller in size Just compact sizeneed external LDO

Just compact sizeneed EMI filter and LDO

Capacitive isolation from AC lines400V with CBB400V capacitors

Inductive isolation> 3750V

No isolation

Narrow output voltage range1.8V ~ 3.6V

Single output voltage3.3V/5V/9V ….

Wide output voltage range 1.8V ~ 36V

MIoT LimitedContact

ming@miothk.comwhatsapp : 53897304wechat : 13068414304

Room 519, Building 5WHong Kong Science ParkShatin, Hong Kong