polythene manufacturing process

Duo

From A to B: Our Packaging Manufacturing Process Explained

UK Polythene Manufacturers

As specialist polythene manufacturers Duo perform each stage of the packaging manufacturing process in-house. This ensures we can guarantee the highest quality control standards and flexibility of response for our customers.

The polythene packaging manufacturing process breaks down into three stages:* Extrusion* Print * Conversion.

Extrusion

During the extrusion process, polymer pellets are melted to create the polythene film from which your printed carrier bags, mailing bags or other packaging product will be formed. Masterbatch is added to colour the film to match your pantone requirements and the thickness and texture of the polythene is checked against your specification.

Print

Flexographic printing plates are used to transfer your designs on to the prepared polythene. At Duo, we use the latest computerised colour matching technology for printed packaging to ensure consistency of shade and tone with support for up to 8 colour printing.

Conversion

During the final stage of the process, the printed polythene film is converted into your packaging product. We offer a range of packaging design options including bottom weld, side weld, perforated, single and double glue strips, and patch, cut out or turn over top handles.

To help optimize packaging speed and efficiency we offer a range of product packing methods to suit your in house storage requirements.

Best Fit Solutions for all your Packaging Needs

Best Fit Packaging Solutions

Whatever polythene products you require, our packaging experts use a comprehensive, consultative approach which will take you on an effortless journey from initial design to finished product - ensuring your polythene products are best suited for your individual packaging requirements.

Contact Duo today and experience the Duo difference.

Vickers StreetManchester, M40 8PU

T: 0161 203 5767F: 0161 203 5663

E: enquiries@duo-uk.co.ukW: www.duo-uk.co.uk