polyken 1019, 1019 spr - corrosion protection · polyken® 1019, 1019 spr ... ssa-st2 (sspc-sp3) or...

PDS-POLYKEN-1019-SERIES-V1-AUG17-AARPS-0163 Page 1 / 1

PRODUCT DATA SHEET

POLYKEN® 1019, 1019 SPR

Product Information

Product description: Polyken® liquid adhesive systems are recommended for use with only Polyken® coating systems. The liquid adhesive systems consist of butyl based elastomers blended with polymeric resins dissolved in an organic solvent system. They can be used for machine applied applications and provide excellent adhesion to the pipe substrate and cathodic disbondment resistance. Liquid adhesive system is recommended primarily for machine application to new pipe surfaces. It promotes high adhesion of the Polyken® coatings to the pipe. Warning: Polyken® liquid adhesive systems are FLAMMABLE MIXTURES. Caution: Store away from heat source. Read all label instructions prior to use. Features: Excellent adhesion Excellent cathodic disbondment resistance Conforms to local and national standards Benefits: Ensures permanent bond of coating system Provides long term corrosion prevention

Product selection guide Max. operating temperature 93°C (200°F) Additional mechanical layer Subsequent Polyken coating

systems Compatible line coatings Carbon steel, PE, FBE, PP,CTE,

Tape, Recommended pipe preparation

SSA-ST2 (SSPC-SP3) or SSA-SA 2 (SSPC-SP6) 1 – 3 mil anchor profile (25 – 76 micron anchor profile)

Performance AWWA standards

Ordering information Polyken Liquid Adhesives are available in different container quantities Quantity Ordering description 55 GAL or 208.2 L 1019 LIQUID ADH 55GAL-208.2L

1019 SPR LIQUID ADH 55 GAL-208.2L 5 GAL or 18.9 L 1019 LIQUID ADH 5 GAL-18.9L

1019 SPR LIQUID ADH 5 GAL-18.9L For other ordering options please contact your Seal For Life representative.

Product properties 1019 1019 SPR Operating temperature

93°C (200°F) 93°C (200°F)

Solvent Heptane Heptane Base Rubber/Resins Rubber/Resins Solids 20 % 13 % Viscosity Thin Syrup Thin Syrup Flash point 10° F (-12°C) 10° F (-12°C) Shelf life 3 years 3 years VOC 5.17 lbs/gal (0.62 kg/l) 5.62 lbs/gal (0.67 kg/l) Weight/gallon 6.5 lb 6.27 lb Weight/liter 0.779 kg 0.751 kg Coverage 500-600 ft²/gal (12.3-

14.7m²/l) 250-300 ft²/gal (6.1 -7.3 m²/l)

Information Documentation Extensive information is available on our web-

site. Application instructions and other documentation can be obtained by contacting our offices, from our local distributor or by sending email to info@sealforlife.com

Certified staff Application of the described coating system shall be carried out by certified personnel.