plastic injection molding process and materials. plastic injection molding process :- process :-...

Plastic Injection MoldingPlastic Injection Molding

Process and MaterialsProcess and Materials

Plastic Injection MoldingPlastic Injection Molding Process Process :-:- Injection Molding produces plastic parts by forcing molten material into a mold where it cools and Injection Molding produces plastic parts by forcing molten material into a mold where it cools and

hardens.  The molded shape produced is a reverse image of the mold tool. Injection molding is low cost hardens.  The molded shape produced is a reverse image of the mold tool. Injection molding is low cost for simple and complex parts. Tooling adds to the initial cost but is quickly amortized. for simple and complex parts. Tooling adds to the initial cost but is quickly amortized.

Plastic Injection MoldingPlastic Injection Molding With injection molding, granular plastic is fed by gravity from a hopper into a heated barrel. With injection molding, granular plastic is fed by gravity from a hopper into a heated barrel. As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heating As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heating

chamber, where it is melted. chamber, where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that rests against the mold, allowing As the plunger advances, the melted plastic is forced through a nozzle that rests against the mold, allowing

it to enter the mold cavity. it to enter the mold cavity. The mold remains cold so the plastic solidifies almost as soon as the mold is filled. The mold remains cold so the plastic solidifies almost as soon as the mold is filled. Injection molding is an extremely versatile process for producing a wide range of simple or complex Injection molding is an extremely versatile process for producing a wide range of simple or complex

plastic parts - economically and with a good finish. plastic parts - economically and with a good finish. Injection molding's efficiency varies by the number of parts you plan to produce. Injection molding's efficiency varies by the number of parts you plan to produce.

Plastic Injection Molding Design Guidelines :-Plastic Injection Molding Design Guidelines :-

Use an approximately uniform wall thickness throughout your design.Use an approximately uniform wall thickness throughout your design.

Plastic Injection MoldingPlastic Injection Molding Keep walls thin - typically between 1/32" and 1/10". This allows for proper cooling and reduces cost by Keep walls thin - typically between 1/32" and 1/10". This allows for proper cooling and reduces cost by

minimizing use of material. Thin walls also reduce problems with material shrinkage. Although some minimizing use of material. Thin walls also reduce problems with material shrinkage. Although some unevenness will occur due to shrinkage, walls as thick as 1/5" can be used. unevenness will occur due to shrinkage, walls as thick as 1/5" can be used.

To strengthen parts, instead of using thicker walls, use additional structures such as ribs. When using a rib, To strengthen parts, instead of using thicker walls, use additional structures such as ribs. When using a rib, make the rib about half the main wall thickness. Use fillets at the base of ribs. make the rib about half the main wall thickness. Use fillets at the base of ribs.

Plastic Injection MoldingPlastic Injection Molding Round corners and edges wherever possible.Round corners and edges wherever possible.

For easy release of the part from the mold, add a slight taper to the sides (typically ~ 2 deg) For easy release of the part from the mold, add a slight taper to the sides (typically ~ 2 deg)

Plastic Injection MoldingPlastic Injection Molding Avoid the above incorrect shapes that are impossible to remove from the mold.  Avoid the above incorrect shapes that are impossible to remove from the mold.  Drawing dimensions should be of the final part - material shrinkage will automatically be considered in the Drawing dimensions should be of the final part - material shrinkage will automatically be considered in the

design of the mold. design of the mold. Where walls meet at a 90 angle, round inside and outside to at least .05" radius - sharper outside corners Where walls meet at a 90 angle, round inside and outside to at least .05" radius - sharper outside corners

can create molding problems and sharper inside corners will increase tooling cost. can create molding problems and sharper inside corners will increase tooling cost.

Possible shapesPossible shapes

A wide variety of simple or complex 2D or 3D shapes.A wide variety of simple or complex 2D or 3D shapes.

Plastic Injection MoldingPlastic Injection Molding Injection molded parts are widely used in: Injection molded parts are widely used in: aerospace, automotive, engineering prototypes, hydraulics and pneumatics, packaging, aerospace, automotive, engineering prototypes, hydraulics and pneumatics, packaging,

architecture, fiber optics, medical and dental, power tools, agriculture, electronics, measuring architecture, fiber optics, medical and dental, power tools, agriculture, electronics, measuring instruments, telecommunication, caps, valves, toys, levers, cams, etc.instruments, telecommunication, caps, valves, toys, levers, cams, etc.

Example parts Example parts

Plastic Injection MoldingPlastic Injection Molding Advantages of Plastic Injection Molding :-Advantages of Plastic Injection Molding :-

Low cost and good repeatability.Low cost and good repeatability.

Extremely cost efficient in larger quantities.Extremely cost efficient in larger quantities.

Specifications for Plastic Injection MoldingSpecifications for Plastic Injection Molding

Material - ABS, acrylic, polycarbonate, high density polyethylene, acetyl, Material - ABS, acrylic, polycarbonate, high density polyethylene, acetyl, polyamide, low density polyethylene, polypropylene, filled and blended plastics.polyamide, low density polyethylene, polypropylene, filled and blended plastics.

Alternative machines - Mill 3-Axis (for short runs). Alternative machines - Mill 3-Axis (for short runs). Tooling - custom mold for your design.Tooling - custom mold for your design. Reducing costs - minimize size and material volume, avoid sharp corners on all Reducing costs - minimize size and material volume, avoid sharp corners on all

features - for example a round post is better than a square post.features - for example a round post is better than a square post.

Plastic Injection MoldingPlastic Injection Molding

Material Selection

Plastic Injection MoldingPlastic Injection Molding

Thank YouThank You