plasma cutting system - gti usa

13022 Trinity Dr. • P.O. Box 1503 • Sta�ord, Texas 77477 • Tel: (281) 240-0550 • Toll-free: (888) 255-0440Fax: (281) 240-0990 • sales@gti-usa.net • www.gti-usa.net

9/20

PLASMA Cutting System

POWER SUPPLY

Input Power: Panel Controls:End Panel Indicators: Side Panel Gauge: System Dimensions: System Weight:Cutting Capacity: Torch and Work Cable Length:Model:Cutting Flow:Pilot:Torch Lead Length:Torch Consumables:CompressorModel:

Air Pressure:Power:

GTI 100SL PLASMA CUTTER — Cutting System Speci�cation

208/230/240 VAC 50/60 Hz, Single phase 30-45 AmpsOn/O� SwitchPower: Illuminates when onOverheating Indicator: Illuminates when unit overheats Torch Protection: Illuminates when consumables are not installed correctlyGas –Check: Illuminates when not enough air supply Air Pressure Gauge: Indicates available air pressureAmpsVoltsHeight: 51" (1300mm)Width: 19" (485mm)Length:14” (360mm)140 Lbs. (57 Kg)1/2" (13mm)3/4" (19mm) Severance50 ft. (15.2m) SL100 3.3CFM (95 LPM)CD Start/Pulsed DC50 feet (15.2m)Gas Distributor, Electrode, Tip & Shield Cup

4620A /4620AC - 220602.0 Horse Power, 4.6 Gallon Twin TankOil Free5.3CFM at 90 psi (153 LPM )110 VAC or 230 VAC (+/-15%) upon request

PARTS AND ACCESSORIES

PART NUMBER

230128

230101

230121

230122

230123

230124

230126

230127

CONSUMABLES

SHIELD ASSEMBLY

SHIELD CUP

GAS DISTRIBUTOR

ELECTRODE

TIP

TORCH HEAD

HANDLE W/ SPLIT TRIGGER

LEAD ASEMBLY 50FT

230521 230522

GTI 100 SL PLASMA CUTTER SERIES

110V SYSTEM 220V SYSTEM