pipe/tube deburring tool hole punch set contour gauges
Post on 04-Feb-2022
3 Views
Preview:
TRANSCRIPT
PIPE/TUBE DEBURRING TOOL
MOBILE KNEE PADSDIGITAL CALIPERS MOBILE TOOL CABINET SEAT
HOLE PUNCH SET CONTOUR GAUGESPTD54 • Ø10 - Ø54mm capacity• Double ended internal/external• Aluminium knurled body• Used for deburring Pipe/Tube Edge
• 150mm / 6" (M738) • 200mm / 8" (M739)• Metric, inch & fraction• 4-way measuring• Includes battery
PPS-7 • 1.2mm mild steel capacity• 3/32", 1/8", 5/32", 3/16", 7/32",
1/4" & 9/32" punches & dies• Includes plastic storage case
• 126mm long (M966) • 254mm long (M967)• 45mm maximum contour depth• Metric & imperial scale • Magnetic side
NEWRELEASENEW
RELEASE
NEWRELEASE
NEWRELEASE
NEWRELEASE
NEWRELEASE
NEWRELEASE
MADE IN TAIWAN
MADE IN TAIWAN
MADE IN TAIWAN
MKP-2 • 6 x oil resistant swivel wheels• Durable high impact plastic frame• Built-in tool storage tray• 113kg load capacity
Shown in Use
6 x Swivel WheelsCreeper Folds Into Seat
TCS-3 • 406mm seat height• 3 x drawers with ball bearing slides• 420 x 235mm padded seat• 2 x magnetic side trays• 360º swivel wheels
MECHANICS CREEPER - TILTING HEAD REST MECHANICS CREEPER & SEAT COMBINATIONMCW-40H• 3 position head rest• 6 swivel wheels• Fabricated steel frame• 1020 x 440 x 110mm
Case Included
MCW-47C - 2 in 1• Quick & easy conversion• 150kg load capacity• 6 swivel wheels• Fabricated steel frame• 1200 x 450 x 130mm
$88.00inc GST(A006)
$55.00inc GST(A005)
$38.50inc GST(M738)
$59.40inc GST(M739)
$38.50inc GST(A3615)
$99.00inc GST(A001)
$72.60inc GST(D068)
$60.50inc GST(P112)
$18.15inc GST(M966)
CTG126
$26.40inc GST(M967)
CTG254
Specifications, prices & availability are subject to change without notice. Prices do not include freight.
Specifications, prices & availability are subject to change without notice. Prices do not include freight.2
$4,499inc GST(S829)
240V$4,499
inc GST(S830)
415V$3,025
inc GST(S850)
$2,035inc GST(B008A)
$1,529inc GST(S816)
$440inc GST(D594)
BD-360$495inc GST(D596)
PD-360$792
inc GST(D598)
PD-440$902
inc GST(D600)
PD-510
BENCH AND PEDESTAL DRILLING MACHINES
• 16mm drill capacity• 2MT spindle• 12 spindle speeds• Swivel & tilt table• 1hp, 240V motor
Drilling machines include: Safety micro switch on pulley guard, drill chuck & arbor
• 20mm drill capacity• 2MT spindle• 12 spindle speeds• Swivel & tilt table• 1hp, 240V motor
• 28mm drill cap.• 3MT spindle• 12 spindle speeds• Swivel & tilt table• 1.5hp, 240V motor
• 32mm drill cap.• 4MT spindle• 12 spindle speeds• Table tilts left &
right to 45º• 2hp, 240V motor
PEDESTALDRILL
PEDESTALDRILL
PEDESTALDRILL
PEDESTALDRILL
BENCHDRILL
BENCHDRILL
CS-350V• 160 x 90mm rectangular capacity• Electronic variable speed 24~120rpm• Auto. retract safety blade guard• Deadman trigger switch• Dual material clamp• Quick action vice• 2.2kW / 3hp • Includes coolant
pump system, blade & stand
ALU-350 - Manual• Dual mitre 45º• Compound mitre 45º• Twin air clamps• 350mm TCT blade• Rear swarf outlet• 2hp, 415V brake motor
• Zinc plated rollers at 150mm pitch• Rollers are ø50mm with commercial bearings• Conveyor is pre-assembled with cross-members• Frames are pre-drilled at 75mm pitch to accept additional rollers• Roller capacity of 60kg each (L812) & (L8125)• Roller capacity of 50kg each (L818)• Roller capacity of 35kg each (L824)• Frames are powder coated
Conveyor (L812)Stand (L816)
ROLLER CONVEYORFRAME
Width (W)LENGTH
(L)HEIGHT
(H)ROLLER
QTY CODE inc GST
290mm 1500mm 80mm 10 L8125 $198290mm 3000mm 80mm 20 L812 $352450mm 3000mm 80mm 20 L818 $429600mm 3000mm 80mm 20 L824 $462
BS-7DS• 215 x 178mm capacity• Swivel head to 45º• Coolant system• Quick action vice• 1hp, 240V motor
$385inc GST(D592)
PD-325
$352inc GST(D590)
BD-325
$2,629inc GST(S828)
COLD SAWS
SWIVEL HEAD BAND SAW
NON-FERROUS CUTTING SAW
ROLLER CONVEYOR & STANDSM
ADE IN TAIWAN
MADE IN TAIWAN
CS-275 - Bench Model• 90 x 50mm capacity• Ø275 x 32mm blade• 42rpm blade speed • 1.3hp 240V motor
CS-315D• 100mm round cap.• Swivel head ±45º• Ø315 x 32mm blade• 44rpm blade speed• 2hp 415V motor• Stand included
MADE IN TAIWAN
BS-7L METAL CUTTING BAND SAW • 305 x 178mm capacity• Mitre cuts to 45º • Built-in coolant system• 1hp, 240V motor
Blades to suit BS-7L & BS-7DSType TPI Material CODE inc GSTCarbon 6 Mild Steel B210 $22.00 Carbon 8 Mild Steel B212 $22.00 Carbon 10 Mild Steel B214 $22.00 Carbon 14 Mild Steel B216 $22.00Bi-Metal 4-6 Mild & Stainless Steel B400 $55.00Bi-Metal 6-10 Mild & Stainless Steel B404 $55.00Bi-Metal 10-14 Mild & Stainless Steel B408 $55.00
$1,199inc GST(B006)
www.t4i.com.au
3Specifications, prices & availability are subject to change without notice. Prices do not include freight.
3MT SPINDLE3MT SPINDLE
CAST IRON TABLEWITH T-SLOTS
BENCH LATHES
LATHE & MILL DRILL COMBINATION PACKAGE
MH-28V • Electronic infinitely variable speed• Dovetail column• 2 speed gearbox• Head tilts ±90°• 1.1kW / 1.5hp
240V motor• Travels:
(X) 430mm (Y) 220mm (Z) 355mm
TU-2506V-20MTU-2506V Bench Lathe:• 250 x 550mm capacity• 26mm spindle bore• Variable speeds 150-2500rpm• 1.6hp 240V motorBF-20AV Mill Head:• 2-speed gearbox• Head tilts ±90º• Variable speeds 90-3000rpm• 1.13hp, 240V motor
TU-2506V-16MTU-2506V Bench Lathe:• 250 x 550mm capacity• 26mm spindle bore• Variable speeds 150-2500rpm• 1.6hp 240V motorBF-16AV Mill Head:• 2-speed gearbox• Head tilts ±90º• Variable speeds 100-3000rpm• 0.66hp, 240V motor
DOVETAILVERTICAL Z-AXIS
MILL DRILL - GEARED & TILTING HEADBF-20LV• Electronic infinitely variable speed• Dovetail column• 2 speed gearbox• Head tilts ±90°• 0.85kW / 1.13hp
240V motor• Travels:
(X) 480mm (Y) 175mm (Z) 280mm
$1,859inc GST(M650)
$1,309inc GST(L687)
$2,035inc GST(L689)
$2,585inc GST(M652)
$2,750inc GST(K146)
TU-2506V-16M$2,904
inc GST(K147)
TU-2506V-20M
TU-2004V• 200 x 300mm turning capacity• 21mm bore, 100mm 3 jaw chuck• Electronic variable speed• 0.6kW, 0.8hp 240V motor
TU-2506V• 250 x 550mm turning capacity• 26mm bore, 125mm 3 jaw chuck• Electronic variable speed • 1.2kW, 1.6hp 240V motor
MILL ACCESSORIESDR03 3 Axis Digital Readout • The DR03 digital readout
counter is designed to suit mill/drill machines
• Each Axis requires a DR03-RH reader head and a DR03-MS magnetic scale
DR03-RH• Reader head• 1.5m cable
DR03-MS• Magnetic scale• 1.5m scale
240V
Note: 1.5 metre magnetic scale can be cut to desired length required
$242inc GST(D690)
$55.00inc GST(D694)
$209inc GST(D692)
FEB- APRIL 2016
4
OUTSIDE MICROMETERS
Code Range Accuracy inc GSTQ101 0-1" 0.004mm $38.50Q103 1-2" 0.004mm $47.30Q106 2-3" 0.005mm $50.60Q102 0-25mm 0.004mm $38.50Q105 25-50mm 0.004mm $47.30Q107 50-75mm 0.005mm $50.60Q110 75-100mm 0.005mm $72.60
OUTSIDE MICROMETERSLarge cast frame
Code Range Accuracy inc GSTQ315 100-125mm 0.006mm $92.95Q316 125-150mm 0.006mm $106.70Q317 150-175mm 0.007mm $114.95Q320 175-200mm 0.007mm $133.10
OUTSIDE MICROMETERSWith interchangeable anvils
Code Range Accuracy inc GSTQ120 100-200mm 0.007mm $344.85Q123 200-300mm 0.009mm $375.10
OUTSIDE MICROMETERS With interchangeable anvils
Code Range Accuracy inc GSTQ340 300-400mm 0.011mm $471.90Q350 400-500mm 0.013mm $544.50Q360 500-600mm 0.015mm $605.00Q370 600-700mm 0.016mm $762.30Q380 700-800mm 0.018mm $883.30Q390 800-900mm 0.020mm $1,028.50Q391 900-1000mm 0.020mm $1,197.90Q420 1000-1200mm 0.020mm $1,681.90
OUTSIDE MICROMETER SET
Code Qty Range Accuracy inc GSTQ116 4 0-4" 0.0001" $181.50
FEELER GAUGE
Code Thickness Range inc GSTQ616 0.03-1.0mm $19.25
SCREW CUTTING GAUGE• 4 thread forms
Code Thread Forms inc GST70-612 4 $14.30
55 & 60ºTHREAD GAUGE• 28 Imperial / 24 Metric
Code inc GSTQ610 $18.15
RADIUS GAUGES• Internal / External
Code Range inc GSTQ614 1-7mm $26.40Q615 7.5-15mm $36.30
SCRIBERS
STEEL RULES
Code Range inc GSTQ620 150mm/6" $7.15Q621 300mm/12" $15.95Q622 600mm/24" $23.10Q623 1000mm/40" $29.15
Code Type Range inc GSTQ630 Double Ended Scriber 190mm $12.10Q631 Pocket Pen Scriber 150mm $23.10
SPRING CALIPERS & DIVIDERS
Code Type inc GSTQ634 Divider $14.30Q635 Inside $14.30Q636 Outside $14.30
VERNIER CALIPERS - SCREW LOCK
VERNIER CALIPERS - FINE ADJUSTER
DIAL CALIPERS
SPLASH PROOF DIGITAL CALIPERS
DIGITAL CALIPERS
Coolant Proof
DIGITAL CALIPERS - LARGE
Code Range Graduations inc GSTQ194 0-150mm 0.02mm $60.50
Q1941 0-200mm/8" 0.02mm/0.001" $78.65
Code Range Graduations inc GSTQ1946 0-180mm/7" 0.02mm/0.001" $78.65Q1947 0-280mm/11" 0.02mm/0.001" $133.10
Code Range Graduations inc GSTQ190 0-6" 0.001" $108.90Q191 0-150mm 0.02mm $108.90Q192 0-200mm 0.02mm $145.20
Code Range Resolution inc GSTQ180 150mm/6" 0.01mm/0.0005" $107.80Q181 200mm/8" 0.01mm/0.0005" $139.15Q182 300mm/12" 0.01mm/0.0005" $204.60
Code Range Resolution inc GSTQ1851 150mm/6" 0.01mm/0.0005" $217.80Q1861 200mm/8" 0.01mm/0.0005" $242.00Q1871 300mm/12" 0.01mm/0.0005" $332.75
Code Range Resolution inc GSTQ188 600mm/24" 0.01mm/0.0005" $568.70
Q1885 1000mm/40" 0.01mm/0.0005" $719.95
Splash Proof
“Now there is an alternative”“a new dimension in quality and value”
Specifications, prices & availability are subject to change without notice. Prices do not include freight.
www.t4i.com.au
Specifications, prices & availability are subject to change without notice. Prices do not include freight. 5
SLOT DRILL SET• Manufactured from
HSS M35 5% Cobalt bright finish screwed shank
• Two flute
END MILL SET• Manufactured
from HSS M35 5% Cobalt bright finish screwed shank
• Four flute
5 Piece Metric6, 8, 10, 12, 16mm$107.80 inc GST (M3351)
5 Piece Metric6, 8, 10, 12, 16mm$107.80 inc GST (M3352)
END MILL SET Solid carbide• Manufactured
from micro fine Solid Carbide
• Bright finish • Plain shank
4 Piece Metric6, 8, 10, 12mm$204.60 inc GST (M337)
SLOT DRILL & END MILL SETS• Manufactured from HSS M2• Plain shank • Includes 5 end mills & 5 slot drills
10 Piece Metric6, 10, 12, 16, 20mm$139.15 inc GST (M3301)
• Precision ground flutes • HSS M2 bright finish
INDUSTRIAL DRILL SETS• Precision ground flutes • HSS M2 bright finish• 135º split point centre
51 Piece Metric1 - 6mm (x 0.1mm)$133.10 inc GST (D1285)
$133.10 inc GST (D102) $119.90 inc GST (D108) $217.80 inc GST (D122)
2MT METRIC DRILL SET• 100% HSS flute length• Sizes: 14.5, 15, 16, 17, 18, 19,
20, 21, 22, 23mm
REDUCED SHANK DRILL SETS - 8 piece• High speed steel M2 grade 100% flute length• 118º point angle
9/16" - 1" RangeShank Ø1/2"$168.30 inc GST (D1181)
Range: 13 - 25mmShank Ø13mm$168.30 inc GST (D1171)
HOLE SAW SET - HSS• Bi-Metal high speed steel • 11 Sizes: 19, 22, 25, 32, 35, 38, 44,
51, 57, 64, 76mm• Includes 3/8" & 1/2" arbors• Pilot drill
HOLE SAW SET - Carbide8 Piece Carbide Tipped• Heat resistant carbide teeth for long life• Suitable for stainless steel, steel, fibre
glass, and glass reinforced products• Range: 16, 20, 22, 25, 28, 30, 32, 35mm
10 Piece Imperial1/4", 3/8", 1/2", 5/8", 3/4" $139.15 inc GST (M3321)
INDUSTRIAL COUNTERSINK SETS• 4 piece• HSS M2
bright finish • Cross hole type • Range: Ø2-5,
5-10, 10-15, 15-20mm
• Angle 45°
• 6 piece • HSS M2
bright finish• 3 flute type • Ranges: Ø1.5-6.3,
6.3-8.3, 8.3-10.4, 10.4-12.4, 12.4-16.5, 16.5-20.5mm
COUNTERBORE DRILL SET• 6 piece set• HSS M35
bright finish• Plain shank• Range: M3,
M4, M5, M6, M8, M10
BALL NOSE CUTTER SET• 5 Piece• HSS M35 5% Cobalt
bright finish• Plain shank• 2 flute • Shank sizes:
6, 10, 10, 12, 16mm
5 Piece Metric6, 8, 10, 12, 16mm$107.80 inc GST (M3355)
RADIUS CUTTER SET• 4 piece set• High Grade
HSS M35 bright finish
• Radius sizes: 4, 5, 6, 8mm
• Shank sizes: 12, 16, 16, 20mm
$145.20 inc GST (M3381) $145.20 inc GST (M3391) $78.65 inc GST (D1051) $90.75 inc GST (D1061)
$66.55 inc GST (T0191)
COMBINATION DRILL & TAP SET• HSS M2 bright
finish• M3, M4, M5, M6,
M8, M10mm• Includes Hex
snap-on shank for hand drill
CENTRE DRILL SET• Industrial
quality• HSS M2 bright
finish• No. 1, 2, 3,
4, 5
SHEET METAL STEP DRILL SET• HSS M2 bright finish• Ø4-12 x 1mm, • Ø6-20 x 2mm, • Ø6-30 x 2mm
INDIVIDUAL ENGINEERS FILES
$47.30 inc GST (D508) $90.75 inc GST (D1071)
250mm Length Files
Cushion grip handle
29 Piece IMPERIAL1/16" - 1/2" (x 1/64")$114.95 inc GST (D1282)
25 Piece Metric1 - 13mm (x 0.5mm)$107.80 inc GST (D1272)
MORSE TAPER SHANK DRILLS• High Speed Steel • Made to DIN345 standard
Shape Cut (Teeth) CODE inc GSTFlat Coarse F120 $17.05Flat Second Cut F121 $17.05Flat Smooth F122 $17.05
Half Round Coarse F124 $17.05Half Round Second Cut F125 $17.05Half Round Smooth F126 $17.05
Round Coarse F127 $17.05Round Second Cut F128 $17.05Round Smooth F129 $17.05
INDUSTRIAL JOBBER DRILL PACKS• Industrial M2 grade high speed steel• Ground flute & split point • 135º ground drill point Ø(mm) Taper CODE inc GST
12.5 1MT D300 $15.9513.0 1MT D301 $18.1513.5 1MT D302 $18.1514.0 1MT D303 $22.0014.5 2MT D304 $22.0015.0 2MT D305 $22.0015.5 2MT D306 $22.0016.0 2MT D307 $22.0016.5 2MT D308 $22.0017.0 2MT D309 $24.2017.5 2MT D310 $24.2018.0 2MT D311 $26.4018.5 2MT D312 $26.4019.0 2MT D313 $26.4019.5 2MT D314 $26.4020.0 2MT D315 $30.2520.5 2MT D316 $30.2521.0 2MT D317 $34.1021.5 2MT D318 $34.10
Ø(mm) Taper CODE inc GST22.0 2MT D319 $36.3022.5 2MT D320 $36.3023.0 2MT D321 $38.5023.5 3MT D322 $43.4524.0 3MT D323 $43.4524.5 3MT D324 $43.4525.0 3MT D325 $47.3025.5 3MT D326 $47.3026.0 3MT D327 $50.6026.5 3MT D328 $50.6027.0 3MT D329 $54.4527.5 3MT D330 $54.4528.0 3MT D331 $56.6528.5 3MT D332 $56.6529.0 3MT D333 $60.5029.5 3MT D334 $60.5030.0 3MT D335 $72.6030.5 3MT D336 $72.6031.0 3MT D337 $83.60
Ø(mm) Qty CODE inc GST1.0 10 D8150 $11.001.5 10 D8151 $11.002.0 10 D8152 $11.002.5 10 D8153 $11.003.0 10 D8154 $15.953.5 10 D8155 $15.954.0 10 D8156 $18.704.5 10 D8157 $23.105.0 10 D8158 $28.055.5 10 D8159 $32.456.0 10 D8160 $38.506.5 10 D8161 $46.75
Ø(mm) Qty CODE inc GST7.0 10 D8162 $55.007.5 10 D8163 $63.808.0 5 D8164 $27.508.5 5 D8165 $31.359.0 5 D8166 $35.759.5 5 D8167 $40.15
10.0 5 D8168 $44.5510.5 5 D8169 $49.5011.0 5 D8170 $55.5511.5 5 D8171 $61.0512.0 5 D8172 $68.2012.5 5 D8173 $73.70
FEB- APRIL 2016
Specifications, prices & availability are subject to change without notice. Prices do not include freight.6
RP7834• 1/2" impact wrench• 3/8" ratchet wrench• 1/4" die grinder• Air hammer/chisel
RP7819 Micro Air Die Grinder Kit • 54,000rpm 2cfm consumption• 10 stones, 1/8" collet & inline oiler• Grinder body dim. 140 x Ø15.5mm
CODE Professional Series:
A038A Air Drill with 3/8" Chuck Reversible 1800rpm
A082 Air Nibbler 1.6mm capacity
A086 Air Shear 1.6mm capacity
A066 Air Belt Sander 10 x 330mm
Belts to Suit Sander (A066) inc GSTA066A Belt 60 grit - Pkt 5 $11.00A066C Belt 120 grit - Pkt 5 $11.00A066D Belt 240 grit - Pkt 5 $13.20A066E Belt Med. Scotchbrite - Pkt 3 $16.50
RP7805 Air Ratchet Wrench Kit• 8,10,12,13,14,17,19mm sockets• 3/8" - 3/8" Flex coupler & 50mm extension• 3/8" - 1/4" x 50mm hex bit adaptor
RP7813 Air Die Grinder Kit • 14 Piece• 10 grinding stones • 3 & 6mm collets• Cushion grip handle
RP7809H Air Hammer Chisel Kit • 2.3 cfm air consumption• Maximum air pressure 90psi• 5 chisels 175mm long & retainer spring
RP7800 Air Impact Gun & Ratchet Wrench Kit • 1/2" Impact wrench & ratchet wrench• 10 sockets (9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm Sockets) • Inline oiler
RP7808 Air Impact Gun Kit• 1/2" impact gun • Inline oiler• 10 sockets (9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm)
$59.40inc GST(A038A)
$71.50inc GST(A052)
$47.30inc GST(A051)
$47.30inc GST(A050)
$83.60inc GST(A047)
$78.65inc GST(A049)
$90.75inc GST(A082)
PNEUMATIC TOOLS
PNEUMATIC TOOLS KITSYS-011M• Includes spare set of "O" rings, springs & seal kit
AIR POP RIVET KIT
AIR TOOL KIT
$102.85inc GST(A086)
$163.35inc GST(A046)
$107.80inc GST(A048)
$217.80inc GST(A053)
$119.90inc GST(A066)
MADE IN TAIWAN
www.t4i.com.au
Specifications, prices & availability are subject to change without notice. Prices do not include freight. 7
WOOD TURNING TOOL SET DUST COLLECTORS
BENCH PLANER JOINTER
THICKNESSER SWIVEL HEAD WOOD LATHECIRCULAR PLUNGE & MITRE CUT SAW PACKAGE
AIR FILTRATION UNITS BELT & DISC LINISHER SANDERPJ-6B • 153mm width capacity• Built-in dust fan with collection bag• 10000rpm blade speed• Cast iron table & fence• 1.1kW / 1.5hp 240V motor
WT-3C - Carbide • 6 piece set• 4 interchangeable carbide inserts set• 12.7mm half round, 10mm triangle,
square & large radius end• 300mm handle length• 450mm total length
HA-1000 • 109cfm HPLV system• 5 micron filter• 50 litre tank• 1.5hp, 240V motor
AP-12 Air Filtration Unit • 1044 cfm• 1 micron filration• Remote with timer• 1/5hp, 240V
T-13S - Bench Mount • 330 x 152mm capacity• Spiral cutter head with HSS inserts• Smooth & quieter cutting• Anti-kick back fingers• 2.4hp, 240V motor
WL-18 • 310 x 900mm turning cap.• Swivelling headstock • Variable speed 500-2000rpm• 0.75kW/1hp, 240V motor• Includes bowl turning
attachment faceplate, drive & live centres toolrest & stand
• 45º saw head tilt • Includes guide rail, lamps & stopscs-55 • 160mm saw blade • 1.2kW/1.6hp, 240VPL-75 • 210mm saw blade • 1.6kW/2.1hp, 240V
W884
AC400 Two Stage Air Filter • 1 micron filter• Two stage, 409cfm • 3 speeds with remote• 1/8hp 240V motor
L-69A • 150 x 1220mm sanding belt• 230mm disc with guarding• Tilting table and mitre guide• 0.75kW / 1hp 240V motor
HD12 • 680cfm LPHV system• Large collection area• 3/4hp, 240V motor• Includes 4 in 1
reducer & 2M hose
DC-3 • 1200 cfm - LPHV system• Portable on wheels• 5 Micron fine filter bag• 1.5kW/2hp, 240V motor
$473inc GST(W618)
$66.00inc GST(W300)
$198inc GST(W885)
$495inc GST(W326)
$759inc GST(W815) $649
inc GST(W382)
$418inc GST(R850)
$418inc GST(L107)
$242inc GST(W886)
$396inc GST(W394)
NEWRELEASE
NEWRELEASE
WOOD BAND SAWSBP-310• 305 x 165mm capacity • Cast iron table tilts 45º• 2 x blade speeds• LED lighting • 0.75kW / 1hp 240V
BP-360• 340 x 225mm capacity • Cast iron table tilts 45º• 2 x blade speeds• LED lighting • 1.1kW / 1.5hp 240V
BP-255 • 245 x 152mm capacity • Cast iron table tilts 45º• 2 x blade speeds• LED lighting • 0.37kW / 0.5hp 240V
$451inc GST(W950)
$693inc GST(W952)
$858inc GST(W955)
NEWRELEASE
NEWRELEASE
NEWRELEASE
$394.90inc GST(W874)
$526inc GST(W884)
PL-75
cs-55
FEB- APRIL 2016
Specifications, prices & availability are subject to change without notice. Prices do not include freight.
Prices valid for February - April 2016
Specials from:
8
SERVICE TOOL TRAY WELDING TABLE & TROLLEYSTT-4W • 740 x 510 x 20mm top tray• 860~1200mm adjust. tray height• 34kg tray load capacity• Padded vertical support
WT-01 Table • Huge 100kg load capacity• 760 x 510mm table • 790~925mm table height• 2 x sturdy castors• Folds flat
$198inc GST(W1004)
$148.50inc GST(T758)
WORKSHOP HYDRAULIC PRESSES
HYDRAULIC PRESS ACCESSORIES
TRADE HYDRAULIC PRESSESHP-20 • 20 Tonne• 110mm ram stroke• Hydraulic operation• Spring return ram
$363inc GST(P144)
HPT-30P • 30 Tonne• 150mm ram stroke• Hydraulic &
pneumatic• Adjust. ram
position
HPM-30 • 30 Tonne• 155mm ram
stroke• Heavy Duty• Hydraulic
& pneumatic• Adjust. ram
position
$1,199inc GST(P130M)
HPM-50 • 50 Tonne• 200mm ram stroke• Motorised
hydraulic system• Includes pressure
gauge & table winch
• 1.5kW/2hp, 240V motor
$4,125inc GST(P131M)
NEWRELEASE
PHW-8 Hand Wheel • Suits press HP-20 (P144) • 210mm cast steel• 3 x locking grub screws
$49.50inc GST(P440)
NEWRELEASE
$198inc GST(P450)
NEWRELEASE
PBA-45 Pressbrake Attachment• Suits hydraulic presses• 50mm open height• 450mm bending length• 40mm wide vee block die• 520 x 85 x 225mm (LxWxH)
INDUSTRIAL FANS • Ø750mm 3 blade design• Fixed or Oscillates to 90º• 3 fan speeds• 280W, 240V motor
$198inc GST(F030)
WALL MOUNT
$198inc GST(F032)
PEDESTAL
WDV-80L (V510)• 80 Litre capacity• 2000W 240V motor• Two separate
brush motors • 106 Litre/sec air flow
WTU-500 Trolley • 480 x 300mm table for welder• Portable on wheels• 2 x shelves for
accessories• Includes chains
for gas bottles$121
inc GST(W241)
Shown Over Car EnginePEDESTAL FAN
$682inc GST(P1475)
INDUSTRIAL WET & DRY VACUUM CLEANERS
WDV-30L (V503)• 30 Litre cap.• 1000W 240V motor• 53 Litre/sec air flow
• Suits industrial applications• Portable on wheels• Wet & dry vacuum system • 2500mm length hose,
40mm diameter• Includes:
1 x brush 1 x crevice tool 1 x dry floor nozzle 1 x wet floor nozzle
$242inc GST(V503) $440
inc GST(V510)
www.t4i.com.au
top related