pelco txb-b translator board manual - a1 security cameras · 2019. 1. 25. · because pelco...
Post on 24-Jan-2021
4 Views
Preview:
TRANSCRIPT
INSTALLATION/OPERATION
TXB-B Translator Board
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
Contents
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Esprit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spectra Mini Dome Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ExSite Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Controller Commands and System Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 TXB-B Zone Programming Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
2
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Only use attachments/accessories specified by the manufacturer.
6. Installation should be done only by qualified personnel and conform to all local codes.
Only use replacement parts recommended by Pelco.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
Important Notice All companies make changes and improvements in their products on a regular basis. Because this product is interfacing with equipment not manufactured by Pelco, the possibility exists that the interface protocols have changed or are in a different configuration from earlier tested units; therefore, an incompatibility may occur. The existence of prior successful installations indicates our intent to provide equipment compatible with other manufacturers, but does not guarantee successful results without on-site integration testing.
Pelco recommends purchasing a single unit for bench testing before the purchase and installation of this product in quantity. Should any problems occur, Pelco will provide on-site technical support (North American installations only) to analyze the interface protocols of your system. We will typically schedule this visit within one week of when the problem is reported to Pelco Technical Support. Pelco will endeavor, at its expense, to correct the interface incompatibility within two weeks on a high priority basis. During these visits, the end user must agree to give Pelco reasonable access to the system in order to study and correct the protocol incompatibility.
In the unlikely event that Pelco is unable to make the translator work in the system, Pelco will accept the return of any Pelco products associated with the translator and refund the amounts paid for these products plus freight expenses. Because Pelco recommends a bench test prior to installation, Pelco will not be liable for any installation costs or lost revenues in the event it cannot solve the compatibility problem.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
3
Regulatory Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
4
Description
The TXB-B translator board allows Bosch (Philips, Burle) controllers to communicate with Pelco’s Esprit®, ExSite™, and Spectra® systems. Once installed the Spectra dome, Spectra Mini dome, ExSite, or Esprit system receives Manchester code commands from the Bosch (Philips, Burle) controller and converts the commands into Pelco’s D protocol.
The TXB-B has been tested and shown to work with the following Bosch (Philips, Burle) systems:
• LTC 5136 AutoDome® Controller
• LTC 5138 Virtual Keyboard, Rev 1.01 (Allegiant® and AutoDome Systems)
• LTC 8300 Series (Allegiant System)
• LTC 8500 Fixed Speed Series (Allegiant System)
• LTC 8800 Variable Speed Series (Allegiant System)
• LTC 8850 Graphical User Interface (Allegiant System)
Based on the information published by Bosch (Philips, Burle), Pelco has reason to believe the TXB-B will also work with the following models:
• LTC 8600 Series (Allegiant System)
• LTC 8900 Series (Allegiant System)
Parts List The following items are supplied:
1 TXB-B translator board (printed circuit board)
1 6-32 screw with lock washer (for Spectra III™/Spectra IV Series only)
1 4-40 screw with lock washer (unused)
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
5
Esprit Installation
DIP SWITCHES
ON OFF ON
OFF
12345678
12345678
SW
2S
W1
ESPRIT CIRCUIT BOARD
16-PIN CONNECTOR
STANDOFF WITH NUT AND WASHER
NYLON WASHER
PHILLIPS SCREW
REMOVE SHORTING PLUG
To install the TXB-B translator board in an Esprit system (refer to Figure 1):
1. Turn off power to the Esprit system.
2. Remove the left cover from the pan and tilt.
3. Remove the shorting plug from the 16-pin connector on the Esprit system’s circuit board.
4. Remove the nut and washer from the standoff on the Esprit system’s circuit board.
NOTES:
• Discard the 6-32 and 4-40 screws and their lock washers; they are not used in the Esprit system.
• Save the 16-pin shorting plug. Otherwise, the Esprit cannot be converted back to a Pelco-controlled system.
Figure 1. Esprit System
5. Set the J1 jumper on the TXB-B to the proper termination setting (refer to Figure 2). Note the following:
• By default, the J1 jumper is installed in the terminated position. • All TXB-Bs in a daisy chain, except the last unit, must be unterminated. • The total wire distance from the Bosch (Philips, Burle) controller to the last TXB-B in a daisy
chain must be less than 4,000 ft (1,219 m). • A maximum of 10 receivers can be installed on a single daisy chain. • To unterminate a TXB-B, remove the J1 jumper from the TXB-B and place it over one pin for
storage.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
6
16-PIN CONNECTOR
TXB-B ADDRESS SWITCH
J1 RESET FOR LOOPING (UNTERMINATED) OPERATION
J1 UNTERMINATED
FRONT BACK J1 TERMINATED
Figure 2. TXB-B Termination and DIP Switch
6. Set the address of the TXB-B (refer to Table C, Table D, and Table E in the Appendix beginning on page 25).
7. Install the TXB-B on the Esprit circuit board (refer to Figure 3):
a. Insert the 16-pin connector on the bottom of the TXB-B into the mating 16-pin connector on the Esprit circuit board.
b. Reinstall the nut and washer on the standoff to secure the TXB-B to the Esprit circuit board.
STANDOFF
16-PIN CONNECTOR
STANDOFF NUT AND WASHER
Figure 3. Installing the TXB-B into the Esprit
8. Set the DIP switches on the Esprit system (refer to Figure 1 for switch location):
a. SW1: Set all SW1 switches to the OFF position.
b. SW2: Set the Espirt address (refer to Table E on page 43 of the Appendix for switch settings).
9. Reinstall the left cover of the pan and tilt:
WARNING: Make sure you seal the unit. Otherwise, moisture could disable or damage the Esprit.
a. Properly position the cover and slide it into place. The sides of the cover must fit under the front and back rain guards of the pan and tilt. The top of the cover must seat against the lip of the top gasket. (Refer to Figure 4.)
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
7
NOT SEALED
GAP
CORRECTINCORRECT
Figure 4. Installing the Esprit Cover
b. Apply pressure and push the top of the cover down to align the screw holes (refer to Figure 5).
c. Insert the Phillips screw and tighten. Tighten until the screw will not turn.
TOP GASKET
FRONT RAIN
GUARD
Figure 5. Installing the Esprit Cover
10. Remove the pan and tilt from the base of the Esprit system.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
8
11. Check the control wiring inside the base of the unit. Refer to the Esprit documentation and the documentation supplied with your controller to make sure the wiring is correct.
Bosch (Philips, Burle) Controller Esprit Wire Harness - RX- (Green)
+ RX+ (Red)
12. Reattach the pan and tilt onto the base of the unit.
13. Apply power to the system. The following message appears on the monitor as soon as the Esprit configuration cycle is completed:
TXB-B Rev x.xx yy
NOTE: x.xx represents the current firmware revision. yy represents the termination setting.
Spectra III/Spectra IV Installation To install the TXB-B translator board in a Spectra III/Spectra IV Series:
1. Turn off power to the dome system.
2. Remove the lower dome.
3. Remove the dome drive by pressing in the blue and red tabs on the sides of the dome drive. Gently rock the dome drive to release it from the back box.
4. Set the J1 jumper on the TXB-B to the proper termination setting (refer to Figure 6). Note the following:
• By default, the J1 jumper is installed in the terminated position. • All TXB-Bs in a daisy chain, except the last unit, must be unterminated. • The total wire distance from the Bosch (Philips, Burle) controller to the last TXB-B in a daisy
chain must be less than 4,000 ft (1,219 m). • A maximum of 10 receivers can be installed on a single daisy chain. • To unterminate a TXB-B, remove the J1 jumper from the TXB-B and place it over one pin for
storage.
16-PIN CONNECTOR
TXB-B ADDRESS SWITCH
J1 RESET FOR LOOPING (UNTERMINATED) OPERATION
J1 UNTERMINATED
FRONT BACK J1 TERMINATED
Figure 6. TXB-B Termination and DIP Switch
5. Set the address of the TXB-B (refer to Table C, Table D, and Table E in the Appendix beginning on page 26).
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
9
6. Install the TXB-B translator board into the back box:
a. Open the hinged door to the back box. Push the tab lock towards the back box wall of the unit and open the door (refer to Figure 7).
Figure 7. Spectra III/Spectra IV Back Box Interconnect Door
b. Check the wiring to the controller. Refer to the Spectra III/Spectra IV documentation and the documentation supplied with your controller to make sure the wiring is correct.
Bosch (Philips, Burle) Controller
Spectra III/Spectra IV Four-Wire Terminal Block
- RX
+ RX+
c. Remove the shorting plug from the 16-pin connector located on the back box circuit board (refer to Figure 8).
Figure 8. Spectra III/Spectra IV Back Box Circuit Board
STANDOFF
6-32 SCREW AND LOCK WASHER
REMOVE SHORTING PLUG
16-PIN CONNECTOR
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
10
NOTES:
• Discard the 4-40 screw and its lock washer; they are not used in the Spectra III/ Spectra IV system.
• Save the 16-pin shorting plug. Otherwise, the Spectra III/Spectra IV cannot be converted back to a Pelco-controlled system.
d. Insert the TXB-B board into the 16-pin connector located on the back box circuit board. Secure the translator board to the standoff on the circuit board using the supplied 6-32 screw and lock washer.
e. Close the interconnect door. Snap the tab lock into place.
7. Set the DIP switches on the Spectra III/Spectra IV system (refer to Figure 9 and Figure 10 for switch locations):
a. Set the SW1 switches on the dome drive to assign the address (refer to Table E on page 43 of the Appendix for switch settings).
b. For Spectra III systems, set all SW3 switches on the dome to the OFF position. For Spectra IV systems, set SW2-1 through SW2-8 to the OFF position.
SW1 SW3 SW1 AND SW2
SW1 SW3SW2
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1
on on
SW2
Figure 9. Spectra III Dome Drive DIP Switches Figure 10. Spectra IV Dome Drive DIP Switches
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
11
8. Install the dome drive. Line up the blue (A) and red (B) tabs with the blue (A) and red (B) labels. When pushing the tabs in, insert one side, then the other. Continue pushing on the ends of the tabs until both tabs click into place. Refer to Figure 11.
NOTE: Refer to the installation manual supplied with the Spectra III/Spectra IV dome for instructions on installing the back box, dome drive, and lower dome.
Figure 11. Spectra III/Spectra IV Dome Drive Installation
9. Install the lower dome.
10. Apply power to the system. The following message appears on the monitor as soon as the Spectra III/Spectra IV configuration cycle is completed:
TXB-B Rev x.xx yy
NOTE: x.xx represents the current firmware revision. yy represents the termination setting.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
12
Spectra Mini Dome Installation
To install the TXB-B translator board in a Spectra Mini dome:
NOTE: Installing a TXB-B into a mini dome increases unit height. In surface mount installations, you must cut a hole in the surface to accommodate the TXB-B cover. For an installation template and more information, refer to the Spectra Mini Dome Installation manual.
1. Turn off power to the dome system.
2. If the Spectra Mini dome is already installed, remove it to access the top of the dome drive where the translator board will be installed.
3. Place the dome drive on a flat surface with the dome liner pointing up.
4. Set the DIP switches on the dome (refer to Figure 12 for switch location):
NOTE: There are no SW1 switch settings on the Spectra Mini dome.
a. Point the camera straight up.
b. Using a flashlight, look through the viewing slot of the dome liner. Rotate the dome liner until you see two DIP switches in the bottom of the housing.
SW 3
SW 2
ON
ON
Figure 12. Locating the Spectra Mini Dome DIP Switches
c. SW2: Set all switches to the OFF position.
d. SW3: Set the Spectra Mini dome address (refer to Table E on page 43 of the Appendix for switch settings).
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
13
5. Set the J1 jumper on the TXB-B to the proper termination setting (refer to Figure 13). Note the following:
• By default, the J1 jumper is installed in the terminated position. • All TXB-Bs in a daisy chain, except the last unit, must be unterminated. • The total wire distance from the Bosch (Philips, Burle) controller to the last TXB-B in a daisy
chain must be less than 4,000 ft (1,219 m). • A maximum of 10 receivers can be installed on a single daisy chain. • To unterminate a TXB-B, remove the J1 jumper from the TXB-B and place it over one pin for
storage.
16-PIN CONNECTOR
TXB-B ADDRESS SWITCH
J1 RESET FOR LOOPING (UNTERMINATED) OPERATION
J1 UNTERMINATED
FRONT BACK J1 TERMINATED
Figure 13. TXB-B Termination and DIP Switch
6. Set the address of the TXB-B (refer to Table C, Table D, and Table E in the Appendix beginning on page 26).
7. Install the TXB-B translator board (refer to Figure 14 and Figure 15 on page 15):
a. Remove the cover from the top of the dome drive.
b. Remove the shorting plug from the 16-pin connector located on the Spectra Mini dome circuit board.
NOTES:
• Discard the 6-32 and 4-40 screws and their lock washers; they are not used in the Spectra Mini dome.
• Save the 16-pin shorting plug and the original cover from the Spectra Mini dome. Otherwise, the unit cannot be converted back to a Pelco-controlled system.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
14
REMOVE SHORTING PLUG
Figure 14. Removing the Mini Dome Cover and Shorting Plug
c. Insert the TXB-B translator board into the 16-pin connector on the Spectra Mini dome’s circuit board.
d. Install the translator board cover that is supplied with the Spectra Mini dome.
Figure 15. Installing the TXB-B and Mini Dome Cover
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
15
8. Check the wiring to the controller. Refer to the Spectra Mini dome documentation and the documentation supplied with your controller to make sure the wiring is correct.
Bosch (Philips, Spectra Mini Dome Burle) Controller RJ45-10 Connector - Pin 4 (RX-)
+ Pin 3 (RX+)
9. Refer to the installation manual for the Spectra Mini dome to complete the installation.
10. Apply power to the system. The following message appears on the monitor as soon as the Spectra Mini dome configuration cycle is completed:
TXB-B Rev x.xx yy
NOTE: x.xx represents the current firmware revision. yy represents the termination setting.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
16
ExSite Installation
To install the TXB-B translator board in an ExSite unit:
WARNING: To reduce the risk of ignition of hazardous atmospheres, disconnect the equipment from the supply circuit before opening.
1. Turn off the power to the ExSite.
WARNING: Total weight of the pan and tilt component is 55 lb (25 kg). Use caution when lifting and assembling the pan and tilt component on the power module. It is recommended that nonslip gloves be worn during installation or removal.
2. Remove the pan and tilt unit from the power module (refer to Figure 16 and Figure 17):
a. Loosen the setscrew in the locking ring with a 2 mm Allen wrench.
b. Loosen the locking ring with a spanner wrench (Pelco part #MF00-1251-121A).
c. Carefully unscrew the locking ring and remove the pan and tilt unit from the power module.
PAN AND TILTUNIT
LOCKING RING
Figure 16. ExSite Spanner Wrench
POWER MODULE
Figure 17. Removing the ExSite Pan and Tilt Unit
3. Set the J1 jumper on the TXB-B to the proper termination setting (refer to Figure 18). Note the following:
• By default, the J1 jumper is installed in the terminated position. • All TXB-Bs in a daisy chain, except the last unit, must be unterminated. • The total wire distance from the Bosch (Philips, Burle) controller to the last TXB-B in a daisy
chain must be less than 4,000 ft (1,219 m). • A maximum of 10 receivers can be installed on a single daisy chain. • To unterminate a TXB-B, remove the J1 jumper from the TXB-B and place it over one pin for
storage.
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
C2431M-I (4/07) 17
16-PIN CONNECTOR
TXB-B ADDRESS SWITCH
J1 RESET FOR LOOPING (UNTERMINATED) OPERATION
J1 UNTERMINATED
FRONT BACK J1 TERMINATED
Figure 18. TXB-B Termination and DIP Switch
4. Set the address of the TXB-B (refer to Table C, Table D, and Table E in the Appendix begining on page 26).
5. Install the TXB-B board on the power module (refer to Figure 19):
a. Remove the shorting plug from the 16-pin connector located on the ExSite’s circuit board.
NOTES:
• Discard the 6-32 and 4-40 screws and their lock washers; they are not used in the ExSite.
• Save the 16-pin shorting plug. Otherwise, the ExSite cannot be converted back to a Pelco-controlled system.
b. Insert the TXB-B board into the 16-pin connector located on the ExSite system’s circuit board. Confirm that the TXB-B board is fully seated into the 16-pin connector.
16-PIN CONNECTOR
SW1 SW3
Figure 19. Installing the TXB-B into the ExSite
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
18
6. Check the wiring to the controller. Refer to the ExSite documentation and the documentation supplied with your controller to make sure the wiring is correct.
Bosch (Philips, Burle) Controller ExSite Wire Harness
+ RX+ (Red)
- RX- (Green)
7. Set the DIP switches on the ExSite system (refer to Figure 19 for switch location):
a. SW3: Verify that all SW3 switches on the ExSite power module are set to the OFF position.
b. SW1: Set the ExSite address (refer to Table E on page 43 of the Appendix for switch settings).
8. Attach the pan and tilt unit to the power module (refer to Figure 16 and Figure 17 on page 17):
a. Align the pan and tilt unit with the power module. Carefully begin to hand tighten the locking ring onto the threads of the power module.
b. Continue to tighten the locking ring with a spanner wrench.
c. Tighten the setscrew in the locking ring with a 2 mm Allen wrench.
NOTE: Refer to the installation manual supplied with the ExSite system for instructions on attaching the pan and tilt unit to the power module.
9. Apply power to the system. The following message appears on the monitor as soon as the ExSite configuration cycle is completed:
TXB-B Rev x.xx yy
NOTE: x.xx represents the current firmware revision. yy represents the termination setting.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
19
Operation
Use one of the following commands to access the on-screen, programmable camera menus with the Philips (Burle) controller: ON 45 Enter or SET 95 Enter
CONTROLLER COMMANDS AND SYSTEM RESPONSE
The following tables show how the TXB-B board and the Pelco unit respond to the Bosch (Philips, Burle) keyboard commands.
Refer to the documentation supplied with the Bosch (Philips, Burle) controller and the Pelco system for operating instructions.
Table A. Controller Commands and System Response
Bosch (Philips, Burle) Controller Commands Pelco Unit Action Pelco Controller Commands
Pan, tilt, zoom, focus, and iris functions
Moves unit accordingly Pan, tilt, zoom, focus, and iris functions
Set 1-64 Enter Saves camera position as preset 1-64 Set preset 1-64
Shot 1-64 Enter Moves camera to preset position 1-64 Call preset 1-64
ON/OFF 5-6 Enter Activates/deactivates auxiliaries 1-2 Auxiliaries 1-2 on/off
Set 95 Enter or ON 45 Enter Display program menu** Call preset 95
Table B. Special Functions
ON 1 Enter Activates auto pan Call preset 97
OFF 1 Enter Stop scan Call preset 96
ON 2 Enter Random scan Call preset 99
OFF 2 Enter Stops auto pan Call preset 96
ON/OFF 3 Enter No action**
ON/OFF 4 Enter No action**
ON/OFF 8 Enter No action
ON/OFF 9 Enter No action**
ON 10 Enter No action**
OFF 10 Enter No action**
ON 11 Enter Set fixed speed 3.8°/sec
OFF 11 Enter Acknowledge alarm
ON 12 Enter Set fixed speed 6°/sec
OFF 12 Enter Acknowledge alarm
ON 13 Enter Set fixed speed 9.6°/sec
OFF 13 Enter Acknowledge alarm
ON 14 Enter Set fixed speed 15.2°/sec
OFF 14 Enter Acknowledge alarm
ON 15 Enter Set fixed speed 20°/sec
OFF 15 Enter Acknowledge alarm
ON 16 Enter Set fixed speed 29°/sec
OFF 16 Enter Acknowledge alarm
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
20
Table B. Special Functions (Continued)
ON 17 Enter Set fixed speed 46°/sec
OFF 17 Enter Acknowledge alarm
ON 18 Enter Set fixed speed 60.1°/sec
OFF 18 Enter No action**
ON/OFF 20 Enter No action**
ON/OFF 21 Enter Set zone 1 start/end
ON/OFF 22 Enter Set zone 2 start/end
ON/OFF 23 Enter Set zone 3 start/end
ON/OFF 24 Enter Set zone 4 start/end
ON/OFF 25 Enter Set zone 5 start/end
ON/OFF 26 Enter Set zone 6 start/end
ON/OFF 27 Enter Set zone 7 start/end
ON/OFF 28 Enter Set zone 8 start/end
ON/OFF 30 Enter No action**
ON/OFF 31 Enter No action
ON/OFF 32 Enter No action
ON/OFF 33 Enter No action
ON/OFF 34 Enter No action
ON 35 Enter No action
OFF 35 Enter No action
ON 39 Enter IR filter, insert Call preset 88
OFF 39 Enter IR filter, remove Call preset 89
ON 40 Enter Manual left limit stop
ON 41 Enter Manual right limit stop
OFF 41 Enter No action**
ON 42 Enter Scan left limit stop
OFF 42 Enter No action**
ON 43 Enter Scan right limit stop
OFF 43 Enter No action**
ON 44 Enter Move to factory home
OFF 44 Enter Recalibrate camera
ON 45 Enter Display program menu** Call preset 95
OFF 45 Enter No action
ON/OFF 46 Enter Stop a scan Call preset 96
ON 47 Enter Random scan Call preset 97
ON 48 Enter Frame scan Call preset 98
ON 49 Enter Auto scan Call preset 99
ON 50 Enter Runs long pattern Call long pattern
OFF 50 Enter Stops pattern Stop long pattern
ON/OFF 51 Enter Run/stop pattern 1 Call pattern 1
ON/OFF 52 Enter Run/stop pattern 2 Call pattern 2
ON/OFF 53 Enter Program long pattern Set long pattern
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
21
Table B. Special Functions (Continued)
ON/OFF 54 Enter Program short pattern 1 Set pattern 1
ON/OFF 55 Enter Program short pattern 2 Set pattern 2
ON 56 Enter Camera flips 180 degrees Call preset 33
ON/OFF 60 Enter Enable/Disable zone scan
ON/OFF 61 Enter No action
ON 62 Enter No action
ON/OFF 63 Enter No action
ON 66 Enter Software version Displayed on power-up
Shot 88 Insert IR filter* Call preset 88
Shot 89 Remove IR filter* Call preset 89
Set 90 Manual left limit stop Set preset 90
ON/OFF 91 Enter No action
ON/OFF 92 Enter No action
ON/OFF 93 Enter No action
Set 95 Enter Enable menu mode Preset 95
Shot 96 Enter Stop scan Preset 96
Shot 97 Enter Activate random scan Preset 97
Shot 98 Enter Activate frame scan Preset 98
Shot 99 Enter Activate continuous scan Preset 99
ON 100 Enter No action**
OFF 100 Enter No action**
Set 101 Enter Left limit stop Call preset 90
Set 102 Enter Right limit stop Call preset 91
Set 103 Enter No action
Set 104 Enter No action
Set 110 Enter Recalibrate camera
Shot 110 Enter Move to factory home Call preset 1
Shot 111 Enter Camera flips 180 degrees Call preset 33
Shot 180 Enter Camera flips 180 degrees Call preset 33
*Spectra SD53CBW family, Spectra SD435 family, Esprit ES30CBW18 family, Esprit ES31CBW18 family, ExSite IPSXM30CBW family, ExSite IPSXM31CBW family, ExSite EHXM30CBW family, and ExSite EHXM31CBW family.
**Pelco systems feature programmable, on-screen, user-friendly menus. Refer to the operation/ programming manual supplied with the Pelco system for programming instructions.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
22
TXB-B ZONE PROGRAMMING PROCEDURE
A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. To program a zone with a Bosch (Philips, Burle) controller, refer to the manual supplied with the controller and perform the following:
Step Procedure 1. Enter zone programming. Issue the enable zone scan command (ON 60 Enter) to
display the zone labels.
2. Set left zone limit. Position the Pelco unit at the left limit of the zone. Issue the zone start command (ON 2# Enter) for the zone being programmed; # is a number between 1 and 8 that represents zones 1 through 8.
3. Set right zone limit. Position the Pelco unit at the right limit of the zone. Issue the zone end command (OFF 2# Enter) for the zone being programmed; # is a number between 1 and 8 that represents zones 1 through 8.
4. Enable the zone label display. Issue the enable zone scan command (ON 60 Enter) to display the zone labels.
IMPORTANT (Spectra and ExSite systems only): After programming a zone, always enable the zone through the Pelco unit programming menu. Refer to the operation/programming manual supplied with the Pelco system.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
23
Troubleshooting
Symptom Possible Cause Suggested Remedy Video does not appear on screen.
Power is not connected to the Pelco unit.
Check the power connector.
Video cable is not connected to the Pelco unit.
Check the video connector.
Translator board is not inserted properly.
Reinstall the translator board. Make sure the pins on the board are inserted correctly.
Pelco unit information (model, firmware, Pelco P and D addresses, and communication settings) does not appear after the configuration cycle.
The Pelco unit cannot complete its configuration cycle.
Refer to the troubleshooting section of the product manual for the Pelco unit.
The message “TXB-B REV x.xx yy” does not appear.
The baud rate setting on the Pelco unit is not correct. The setting appears on power-up.
Make sure the baud rate setting on the Pelco unit is 2400. Then cycle device power.
The Pelco unit does not respond to commands.
The unit address is not correct. Make sure the Pelco unit (receiver) address is correct. This address can range from 1 to 255.
Make sure the controller is addressing the correct Pelco unit.
The receiving and transmitting lines are not connected properly.
Make sure the TX+, TX-, RX+, and RX- lines are properly connected. (Refer to the wiring tables in this manual as well as the troubleshooting section of the product manual for the controller.)
The command was lost between the controller and the Pelco unit.
Retry the command.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
24
Appendix
Perform the following steps to find and set the addresses for the TXB-B board and the Pelco unit.
1. Refer to Table C on page 26 to find the TXB-B address (block number). Select the block range that contains the receiver address. The block number for the block range is the address for the TXB-B translator board.
Example: To find the TXB-B address when the receiver address is 131:
a. Find the block range for 131 in Table C. This value is between 129 (low) and 255 (high).
b. The block number for the 129 to 255 range is 1. Therefore, the address for the TXB-B translator board is 1.
2. Refer to Table D on page 27 to find the Pelco unit address. Select the column that corresponds to the TXB-B address. Locate the row in the column that contains the receiver address. The row number is the unit address.
Example: To find the Pelco unit address when the receiver address is 131:
a. Use step 1 to determine the TXB-B address. In this case, the address is 1.
b. Search for the receiver address in the column under 1 in Table D, in this case 131.
c. The 131 address appears in row 3. Therefore, the Pelco unit address is 3.
3. Refer to Table E on page 43 to set the DIP switches for the TXB-B address and the Pelco unit address.
Example: To find the address settings when the receiver address is 131:
a. Use step 1 to determine the TXB-B address. In this case, the address is 1.
b. Use step 2 to determine the Pelco unit address. In this case, the unit address is 3.
c. Locate the row in Table E that corresponds to the Pelco unit address. In this case, row 4 corresponds to unit address 3.
d. Identify the switch settings for the unit address. The switch settings for address 3 are: ON, ON, OFF, OFF, OFF, OFF, OFF, OFF.
e. Set these switches on the Pelco unit.
NOTES:
• The TXB-B translator board uses the same address switch position settings as the Pelco unit.
• Receiver addresses that are divisible by 128 (such as 0, 128, 256, 384) are reserved and may not be used.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
25
Table C. Controller Block Range
Block Low High
0 1 127
1 129 255
2 257 383
3 385 511
4 513 639
5 641 767
6 769 895
7 897 1,023
8 1,025 1,151
9 1,153 1,279
10 1,281 1,407
11 1,409 1,535
12 1,537 1,663
13 1,665 1,791
14 1,793 1,919
15 1,921 2,047
16 2,049 2,175
17 2,177 2,303
18 2,305 2,431
19 2,433 2,559
20 2,561 2,687
Block Low High
21 2,689 2,815
22 2,817 2,943
23 2,945 3,071
24 3,073 3,199
25 3,201 3,327
26 3,329 3,455
27 3,457 3,583
28 3,585 3,721
29 3,723 3,839
30 3,841 3,967
31 3,969 4,095
32 4,097 4,223
33 4,225 4,351
34 4,353 4,479
35 4,481 4,607
36 4,609 4,735
37 4,737 4,863
38 4,865 4,991
39 4,993 5,119
40 5,121 5,247
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
26
5 5
10 10
15 15
20 20
25 25
30 30
35 35
Table D. Pelco Unit Address
TXB-B ADDRESS
0 1 2 3 4 5 6 7 8 9 10PE
LCO
UNIT
ADD
RESS
1 1 129 257 385 513 641 769 897 1025 1153 1281
2 2 130 258 386 514 642 770 898 1026 1154 1282
3 3 131 259 387 515 643 771 899 1027 1155 1283
4 4 132 260 388 516 644 772 900 1028 1156 1284
133 261 389 517 645 773 901 1029 1157 1285
6 6 134 262 390 518 646 774 902 1030 1158 1286
7 7 135 263 391 519 647 775 903 1031 1159 1287
8 8 136 264 392 520 648 776 904 1032 1160 1288
9 9 137 265 393 521 649 777 905 1033 1161 1289
138 266 394 522 650 778 906 1034 1162 1290
11 11 139 267 395 523 651 779 907 1035 1163 1291
12 12 140 268 396 524 652 780 908 1036 1164 1292
13 13 141 269 397 525 653 781 909 1037 1165 1293
14 14 142 270 398 526 654 782 910 1038 1166 1294
143 271 399 527 655 783 911 1039 1167 1295
16 16 144 272 400 528 656 784 912 1040 1168 1296
17 17 145 273 401 529 657 785 913 1041 1169 1297
18 18 146 274 402 530 658 786 914 1042 1170 1298
19 19 147 275 403 531 659 787 915 1043 1171 1299
148 276 404 532 660 788 916 1044 1172 1300
21 21 149 277 405 533 661 789 917 1045 1173 1301
22 22 150 278 406 534 662 790 918 1046 1174 1302
23 23 151 279 407 535 663 791 919 1047 1175 1303
24 24 152 280 408 536 664 792 920 1048 1176 1304
153 281 409 537 665 793 921 1049 1177 1305
26 26 154 282 410 538 666 794 922 1050 1178 1306
27 27 155 283 411 539 667 795 923 1051 1179 1307
28 28 156 284 412 540 668 796 924 1052 1180 1308
29 29 157 285 413 541 669 797 925 1053 1181 1309
158 286 414 542 670 798 926 1054 1182 1310
31 31 159 287 415 543 671 799 927 1055 1183 1311
32 32 160 288 416 544 672 800 928 1056 1184 1312
33 33 161 289 417 545 673 801 929 1057 1185 1313
34 34 162 290 418 546 674 802 930 1058 1186 1314
163 291 419 547 675 803 931 1059 1187 1315
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
27
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
0 1 2 3 4 5 6 7 8 9 10PE
LCO
UN
IT A
DDR
ESS
36 36 164 292 420 548 676 804 932 1060 1188 1316
37 37 165 293 421 549 677 805 933 1061 1189 1317
38 38 166 294 422 550 678 806 934 1062 1190 1318
39 39 167 295 423 551 679 807 935 1063 1191 1319
40 40 168 296 424 552 680 808 936 1064 1192 1320
41 41 169 297 425 553 681 809 937 1065 1193 1321
42 42 170 298 426 554 682 810 938 1066 1194 1322
43 43 171 299 427 555 683 811 939 1067 1195 1323
44 44 172 300 428 556 684 812 940 1068 1196 1324
45 45 173 301 429 557 685 813 941 1069 1197 1325
46 46 174 302 430 558 686 814 942 1070 1198 1326
47 47 175 303 431 559 687 815 943 1071 1199 1327
48 48 176 304 432 560 688 816 944 1072 1200 1328
49 49 177 305 433 561 689 817 945 1073 1201 1329
50 50 178 306 434 562 690 818 946 1074 1202 1330
51 51 179 307 435 563 691 819 947 1075 1203 1331
52 52 180 308 436 564 692 820 948 1076 1204 1332
53 53 181 309 437 565 693 821 949 1077 1205 1333
54 54 182 310 438 566 694 822 950 1078 1206 1334
55 55 183 311 439 567 695 823 951 1079 1207 1335
56 56 184 312 440 568 696 824 952 1080 1208 1336
57 57 185 313 441 569 697 825 953 1081 1209 1337
58 58 186 314 442 570 698 826 954 1082 1210 1338
59 59 187 315 443 571 699 827 955 1083 1211 1339
60 60 188 316 444 572 700 828 956 1084 1212 1340
61 61 189 317 445 573 701 829 957 1085 1213 1341
62 62 190 318 446 574 702 830 958 1086 1214 1342
63 63 191 319 447 575 703 831 959 1087 1215 1343
64 64 192 320 448 576 704 832 960 1088 1216 1344
65 65 193 321 449 577 705 833 961 1089 1217 1345
66 66 194 322 450 578 706 834 962 1090 1218 1346
67 67 195 323 451 579 707 835 963 1091 1219 1347
68 68 196 324 452 580 708 836 964 1092 1220 1348
69 69 197 325 453 581 709 837 965 1093 1221 1349
70 70 198 326 454 582 710 838 966 1094 1222 1350
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
28
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
0 1 2 3 4 5 6 7 8 9 10PE
LCO
UN
IT A
DDR
ESS
71 71 199 327 455 583 711 839 967 1095 1223 1351
72 72 200 328 456 584 712 840 968 1096 1224 1352
73 73 201 329 457 585 713 841 969 1097 1225 1353
74 74 202 330 458 586 714 842 970 1098 1226 1354
75 75 203 331 459 587 715 843 971 1099 1227 1355
76 76 204 332 460 588 716 844 972 1100 1228 1356
77 77 205 333 461 589 717 845 973 1101 1229 1357
78 78 206 334 462 590 718 846 974 1102 1230 1358
79 79 207 335 463 591 719 847 975 1103 1231 1359
80 80 208 336 464 592 720 848 976 1104 1232 1360
81 81 209 337 465 593 721 849 977 1105 1233 1361
82 82 210 338 466 594 722 850 978 1106 1234 1362
83 83 211 339 467 595 723 851 979 1107 1235 1363
84 84 212 340 468 596 724 852 980 1108 1236 1364
85 85 213 341 469 597 725 853 981 1109 1237 1365
86 86 214 342 470 598 726 854 982 1110 1238 1366
87 87 215 343 471 599 727 855 983 1111 1239 1367
88 88 216 344 472 600 728 856 984 1112 1240 1368
89 89 217 345 473 601 729 857 985 1113 1241 1369
90 90 218 346 474 602 730 858 986 1114 1242 1370
91 91 219 347 475 603 731 859 987 1115 1243 1371
92 92 220 348 476 604 732 860 988 1116 1244 1372
93 93 221 349 477 605 733 861 989 1117 1245 1373
94 94 222 350 478 606 734 862 990 1118 1246 1374
95 95 223 351 479 607 735 863 991 1119 1247 1375
96 96 224 352 480 608 736 864 992 1120 1248 1376
97 97 225 353 481 609 737 865 993 1121 1249 1377
98 98 226 354 482 610 738 866 994 1122 1250 1378
99 99 227 355 483 611 739 867 995 1123 1251 1379
100 100 228 356 484 612 740 868 996 1124 1252 1380
101 101 229 357 485 613 741 869 997 1125 1253 1381
102 102 230 358 486 614 742 870 998 1126 1254 1382
103 103 231 359 487 615 743 871 999 1127 1255 1383
104 104 232 360 488 616 744 872 1000 1128 1256 1384
105 105 233 361 489 617 745 873 1001 1129 1257 1385
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
29
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
0 1 2 3 4 5 6 7 8 9 10PE
LCO
UNIT
AD
DRES
S
106 106 234 362 490 618 746 874 1002 1130 1258 1386
107 107 235 363 491 619 747 875 1003 1131 1259 1387
108 108 236 364 492 620 748 876 1004 1132 1260 1388
109 109 237 365 493 621 749 877 1005 1133 1261 1389
110 110 238 366 494 622 750 878 1006 1134 1262 1390
111 111 239 367 495 623 751 879 1007 1135 1263 1391
112 112 240 368 496 624 752 880 1008 1136 1264 1392
113 113 241 369 497 625 753 881 1009 1137 1265 1393
114 114 242 370 498 626 754 882 1010 1138 1266 1394
115 115 243 371 499 627 755 883 1011 1139 1267 1395
116 116 244 372 500 628 756 884 1012 1140 1268 1396
117 117 245 373 501 629 757 885 1013 1141 1269 1397
118 118 246 374 502 630 758 886 1014 1142 1270 1398
119 119 247 375 503 631 759 887 1015 1143 1271 1399
120 120 248 376 504 632 760 888 1016 1144 1272 1400
121 121 249 377 505 633 761 889 1017 1145 1273 1401
122 122 250 378 506 634 762 890 1018 1146 1274 1402
123 123 251 379 507 635 763 891 1019 1147 1275 1403
124 124 252 380 508 636 764 892 1020 1148 1276 1404
125 125 253 381 509 637 765 893 1021 1149 1277 1405
126 126 254 382 510 638 766 894 1022 1150 1278 1406
127 127 255 383 511 639 767 895 1023 1151 1279 1407
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
30
5
10
15
20
25
30
35
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
11 12 13 14 15 16 17 18 19 20 PE
LCO
UNIT
ADD
RESS
1 1409 1537 1665 1793 1921 2049 2177 2305 2433 2561
2 1410 1538 1666 1794 1922 2050 2178 2306 2434 2562
3 1411 1539 1667 1795 1923 2051 2179 2307 2435 2563
4 1412 1540 1668 1796 1924 2052 2180 2308 2436 2564
1413 1541 1669 1797 1925 2053 2181 2309 2437 2565
6 1414 1542 1670 1798 1926 2054 2182 2310 2438 2566
7 1415 1543 1671 1799 1927 2055 2183 2311 2439 2567
8 1416 1544 1672 1800 1928 2056 2184 2312 2440 2568
9 1417 1545 1673 1801 1929 2057 2185 2313 2441 2569
1418 1546 1674 1802 1930 2058 2186 2314 2442 2570
11 1419 1547 1675 1803 1931 2059 2187 2315 2443 2571
12 1420 1548 1676 1804 1932 2060 2188 2316 2444 2572
13 1421 1549 1677 1805 1933 2061 2189 2317 2445 2573
14 1422 1550 1678 1806 1934 2062 2190 2318 2446 2574
1423 1551 1679 1807 1935 2063 2191 2319 2447 2575
16 1424 1552 1680 1808 1936 2064 2192 2320 2448 2576
17 1425 1553 1681 1809 1937 2065 2193 2321 2449 2577
18 1426 1554 1682 1810 1938 2066 2194 2322 2450 2578
19 1427 1555 1683 1811 1939 2067 2195 2323 2451 2579
1428 1556 1684 1812 1940 2068 2196 2324 2452 2580
21 1429 1557 1685 1813 1941 2069 2197 2325 2453 2581
22 1430 1558 1686 1814 1942 2070 2198 2326 2454 2582
23 1431 1559 1687 1815 1943 2071 2199 2327 2455 2583
24 1432 1560 1688 1816 1944 2072 2200 2328 2456 2584
1433 1561 1689 1817 1945 2073 2201 2329 2457 2585
26 1434 1562 1690 1818 1946 2074 2202 2330 2458 2586
27 1435 1563 1691 1819 1947 2075 2203 2331 2459 2587
28 1436 1564 1692 1820 1948 2076 2204 2332 2460 2588
29 1437 1565 1693 1821 1949 2077 2205 2333 2461 2589
1438 1566 1694 1822 1950 2078 2206 2334 2462 2590
31 1439 1567 1695 1823 1951 2079 2207 2335 2463 2591
32 1440 1568 1696 1824 1952 2080 2208 2336 2464 2592
33 1441 1569 1697 1825 1953 2081 2209 2337 2465 2593
34 1442 1570 1698 1826 1954 2082 2210 2338 2466 2594
1443 1571 1699 1827 1955 2083 2211 2339 2467 2595
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
31
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
11 12 13 14 15 16 17 18 19 20 PE
LCO
UN
IT A
DDR
ESS
36 1444 1572 1700 1828 1956 2084 2212 2340 2468 2596
37 1445 1573 1701 1829 1957 2085 2213 2341 2469 2597
38 1446 1574 1702 1830 1958 2086 2214 2342 2470 2598
39 1447 1575 1703 1831 1959 2087 2215 2343 2471 2599
40 1448 1576 1704 1832 1960 2088 2216 2344 2472 2600
41 1449 1577 1705 1833 1961 2089 2217 2345 2473 2601
42 1450 1578 1706 1834 1962 2090 2218 2346 2474 2602
43 1451 1579 1707 1835 1963 2091 2219 2347 2475 2603
44 1452 1580 1708 1836 1964 2092 2220 2348 2476 2604
45 1453 1581 1709 1837 1965 2093 2221 2349 2477 2605
46 1454 1582 1710 1838 1966 2094 2222 2350 2478 2606
47 1455 1583 1711 1839 1967 2095 2223 2351 2479 2607
48 1456 1584 1712 1840 1968 2096 2224 2352 2480 2608
49 1457 1585 1713 1841 1969 2097 2225 2353 2481 2609
50 1458 1586 1714 1842 1970 2098 2226 2354 2482 2610
51 1459 1587 1715 1843 1971 2099 2227 2355 2483 2611
52 1460 1588 1716 1844 1972 2100 2228 2356 2484 2612
53 1461 1589 1717 1845 1973 2101 2229 2357 2485 2613
54 1462 1590 1718 1846 1974 2102 2230 2358 2486 2614
55 1463 1591 1719 1847 1975 2103 2231 2359 2487 2615
56 1464 1592 1720 1848 1976 2104 2232 2360 2488 2616
57 1465 1593 1721 1849 1977 2105 2233 2361 2489 2617
58 1466 1594 1722 1850 1978 2106 2234 2362 2490 2618
59 1467 1595 1723 1851 1979 2107 2235 2363 2491 2619
60 1468 1596 1724 1852 1980 2108 2236 2364 2492 2620
61 1469 1597 1725 1853 1981 2109 2237 2365 2493 2621
62 1470 1598 1726 1854 1982 2110 2238 2366 2494 2622
63 1471 1599 1727 1855 1983 2111 2239 2367 2495 2623
64 1472 1600 1728 1856 1984 2112 2240 2368 2496 2624
65 1473 1601 1729 1857 1985 2113 2241 2369 2497 2625
66 1474 1602 1730 1858 1986 2114 2242 2370 2498 2626
67 1475 1603 1731 1859 1987 2115 2243 2371 2499 2627
68 1476 1604 1732 1860 1988 2116 2244 2372 2500 2628
69 1477 1605 1733 1861 1989 2117 2245 2373 2501 2629
70 1478 1606 1734 1862 1990 2118 2246 2374 2502 2630
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
32
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
11 12 13 14 15 16 17 18 19 20 PE
LCO
UN
IT A
DDR
ESS
71 1479 1607 1735 1863 1991 2119 2247 2375 2503 2631
72 1480 1608 1736 1864 1992 2120 2248 2376 2504 2632
73 1481 1609 1737 1865 1993 2121 2249 2377 2505 2633
74 1482 1610 1738 1866 1994 2122 2250 2378 2506 2634
75 1483 1611 1739 1867 1995 2123 2251 2379 2507 2635
76 1484 1612 1740 1868 1996 2124 2252 2380 2508 2636
77 1485 1613 1741 1869 1997 2125 2253 2381 2509 2637
78 1486 1614 1742 1870 1998 2126 2254 2382 2510 2638
79 1487 1615 1743 1871 1999 2127 2255 2383 2511 2639
80 1488 1616 1744 1872 2000 2128 2256 2384 2512 2640
81 1489 1617 1745 1873 2001 2129 2257 2385 2513 2641
82 1490 1618 1746 1874 2002 2130 2258 2386 2514 2642
83 1491 1619 1747 1875 2003 2131 2259 2387 2515 2643
84 1492 1620 1748 1876 2004 2132 2260 2388 2516 2644
85 1493 1621 1749 1877 2005 2133 2261 2389 2517 2645
86 1494 1622 1750 1878 2006 2134 2262 2390 2518 2646
87 1495 1623 1751 1879 2007 2135 2263 2391 2519 2647
88 1496 1624 1752 1880 2008 2136 2264 2392 2520 2648
89 1497 1625 1753 1881 2009 2137 2265 2393 2521 2649
90 1498 1626 1754 1882 2010 2138 2266 2394 2522 2650
91 1499 1627 1755 1883 2011 2139 2267 2395 2523 2651
92 1500 1628 1756 1884 2012 2140 2268 2396 2524 2652
93 1501 1629 1757 1885 2013 2141 2269 2397 2525 2653
94 1502 1630 1758 1886 2014 2142 2270 2398 2526 2654
95 1503 1631 1759 1887 2015 2143 2271 2399 2527 2655
96 1504 1632 1760 1888 2016 2144 2272 2400 2528 2656
97 1505 1633 1761 1889 2017 2145 2273 2401 2529 2657
98 1506 1634 1762 1890 2018 2146 2274 2402 2530 2658
99 1507 1635 1763 1891 2019 2147 2275 2403 2531 2659
100 1508 1636 1764 1892 2020 2148 2276 2404 2532 2660
101 1509 1637 1765 1893 2021 2149 2277 2405 2533 2661
102 1510 1638 1766 1894 2022 2150 2278 2406 2534 2662
103 1511 1639 1767 1895 2023 2151 2279 2407 2535 2663
104 1512 1640 1768 1896 2024 2152 2280 2408 2536 2664
105 1513 1641 1769 1897 2025 2153 2281 2409 2537 2665
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
33
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
11 12 13 14 15 16 17 18 19 20 PE
LCO
UNIT
AD
DRES
S
106 1514 1642 1770 1898 2026 2154 2282 2410 2538 2666
107 1515 1643 1771 1899 2027 2155 2283 2411 2539 2667
108 1516 1644 1772 1900 2028 2156 2284 2412 2540 2668
109 1517 1645 1773 1901 2029 2157 2285 2413 2541 2669
110 1518 1646 1774 1902 2030 2158 2286 2414 2542 2670
111 1519 1647 1775 1903 2031 2159 2287 2415 2543 2671
112 1520 1648 1776 1904 2032 2160 2288 2416 2544 2672
113 1521 1649 1777 1905 2033 2161 2289 2417 2545 2673
114 1522 1650 1778 1906 2034 2162 2290 2418 2546 2674
115 1523 1651 1779 1907 2035 2163 2291 2419 2547 2675
116 1524 1652 1780 1908 2036 2164 2292 2420 2548 2676
117 1525 1653 1781 1909 2037 2165 2293 2421 2549 2677
118 1526 1654 1782 1910 2038 2166 2294 2422 2550 2678
119 1527 1655 1783 1911 2039 2167 2295 2423 2551 2679
120 1528 1656 1784 1912 2040 2168 2296 2424 2552 2680
121 1529 1657 1785 1913 2041 2169 2297 2425 2553 2681
122 1530 1658 1786 1914 2042 2170 2298 2426 2554 2682
123 1531 1659 1787 1915 2043 2171 2299 2427 2555 2683
124 1532 1660 1788 1916 2044 2172 2300 2428 2556 2684
125 1533 1661 1789 1917 2045 2173 2301 2429 2557 2685
126 1534 1662 1790 1918 2046 2174 2302 2430 2558 2686
127 1535 1663 1791 1919 2047 2175 2303 2431 2559 2687
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
34
5
10
15
20
25
30
35
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
21 22 23 24 25 26 27 28 29 30 PE
LCO
UNIT
ADD
RESS
1 2689 2817 2945 3073 3201 3329 3457 3585 3713 3841
2 2690 2818 2946 3074 3202 3330 3458 3586 3714 3842
3 2691 2819 2947 3075 3203 3331 3459 3587 3715 3843
4 2692 2820 2948 3076 3204 3332 3460 3588 3716 3844
2693 2821 2949 3077 3205 3333 3461 3589 3717 3845
6 2694 2822 2950 3078 3206 3334 3462 3590 3718 3846
7 2695 2823 2951 3079 3207 3335 3463 3591 3719 3847
8 2696 2824 2952 3080 3208 3336 3464 3592 3720 3848
9 2697 2825 2953 3081 3209 3337 3465 3593 3721 3849
2698 2826 2954 3082 3210 3338 3466 3594 3722 3850
11 2699 2827 2955 3083 3211 3339 3467 3595 3723 3851
12 2700 2828 2956 3084 3212 3340 3468 3596 3724 3852
13 2701 2829 2957 3085 3213 3341 3469 3597 3725 3853
14 2702 2830 2958 3086 3214 3342 3470 3598 3726 3854
2703 2831 2959 3087 3215 3343 3471 3599 3727 3855
16 2704 2832 2960 3088 3216 3344 3472 3600 3728 3856
17 2705 2833 2961 3089 3217 3345 3473 3601 3729 3857
18 2706 2834 2962 3090 3218 3346 3474 3602 3730 3858
19 2707 2835 2963 3091 3219 3347 3475 3603 3731 3859
2708 2836 2964 3092 3220 3348 3476 3604 3732 3860
21 2709 2837 2965 3093 3221 3349 3477 3605 3733 3861
22 2710 2838 2966 3094 3222 3350 3478 3606 3734 3862
23 2711 2839 2967 3095 3223 3351 3479 3607 3735 3863
24 2712 2840 2968 3096 3224 3352 3480 3608 3736 3864
2713 2841 2969 3097 3225 3353 3481 3609 3737 3865
26 2714 2842 2970 3098 3226 3354 3482 3610 3738 3866
27 2715 2843 2971 3099 3227 3355 3483 3611 3739 3867
28 2716 2844 2972 3100 3228 3356 3484 3612 3740 3868
29 2717 2845 2973 3101 3229 3357 3485 3613 3741 3869
2718 2846 2974 3102 3230 3358 3486 3614 3742 3870
31 2719 2847 2975 3103 3231 3359 3487 3615 3743 3871
32 2720 2848 2976 3104 3232 3360 3488 3616 3744 3872
33 2721 2849 2977 3105 3233 3361 3489 3617 3745 3873
34 2722 2850 2978 3106 3234 3362 3490 3618 3746 3874
2723 2851 2979 3107 3235 3363 3491 3619 3747 3875
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
35
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
21 22 23 24 25 26 27 28 29 30 PE
LCO
UN
IT A
DDR
ESS
36 2724 2852 2980 3108 3236 3364 3492 3620 3748 3876
37 2725 2853 2981 3109 3237 3365 3493 3621 3749 3877
38 2726 2854 2982 3110 3238 3366 3494 3622 3750 3878
39 2727 2855 2983 3111 3239 3367 3495 3623 3751 3879
40 2728 2856 2984 3112 3240 3368 3496 3624 3752 3880
41 2729 2857 2985 3113 3241 3369 3497 3625 3753 3881
42 2730 2858 2986 3114 3242 3370 3498 3626 3754 3882
43 2731 2859 2987 3115 3243 3371 3499 3627 3755 3883
44 2732 2860 2988 3116 3244 3372 3500 3628 3756 3884
45 2733 2861 2989 3117 3245 3373 3501 3629 3757 3885
46 2734 2862 2990 3118 3246 3374 3502 3630 3758 3886
47 2735 2863 2991 3119 3247 3375 3503 3631 3759 3887
48 2736 2864 2992 3120 3248 3376 3504 3632 3760 3888
49 2737 2865 2993 3121 3249 3377 3505 3633 3761 3889
50 2738 2866 2994 3122 3250 3378 3506 3634 3762 3890
51 2739 2867 2995 3123 3251 3379 3507 3635 3763 3891
52 2740 2868 2996 3124 3252 3380 3508 3636 3764 3892
53 2741 2869 2997 3125 3253 3381 3509 3637 3765 3893
54 2742 2870 2998 3126 3254 3382 3510 3638 3766 3894
55 2743 2871 2999 3127 3255 3383 3511 3639 3767 3895
56 2744 2872 3000 3128 3256 3384 3512 3640 3768 3896
57 2745 2873 3001 3129 3257 3385 3513 3641 3769 3897
58 2746 2874 3002 3130 3258 3386 3514 3642 3770 3898
59 2747 2875 3003 3131 3259 3387 3515 3643 3771 3899
60 2748 2876 3004 3132 3260 3388 3516 3644 3772 3900
61 2749 2877 3005 3133 3261 3389 3517 3645 3773 3901
62 2750 2878 3006 3134 3262 3390 3518 3646 3774 3902
63 2751 2879 3007 3135 3263 3391 3519 3647 3775 3903
64 2752 2880 3008 3136 3264 3392 3520 3648 3776 3904
65 2753 2881 3009 3137 3265 3393 3521 3649 3777 3905
66 2754 2882 3010 3138 3266 3394 3522 3650 3778 3906
67 2755 2883 3011 3139 3267 3395 3523 3651 3779 3907
68 2756 2884 3012 3140 3268 3396 3524 3652 3780 3908
69 2757 2885 3013 3141 3269 3397 3525 3653 3781 3909
70 2758 2886 3014 3142 3270 3398 3526 3654 3782 3910
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
36
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
21 22 23 24 25 26 27 28 29 30 PE
LCO
UN
IT A
DDR
ESS
71 2759 2887 3015 3143 3271 3399 3527 3655 3783 3911
72 2760 2888 3016 3144 3272 3400 3528 3656 3784 3912
73 2761 2889 3017 3145 3273 3401 3529 3657 3785 3913
74 2762 2890 3018 3146 3274 3402 3530 3658 3786 3914
75 2763 2891 3019 3147 3275 3403 3531 3659 3787 3915
76 2764 2892 3020 3148 3276 3404 3532 3660 3788 3916
77 2765 2893 3021 3149 3277 3405 3533 3661 3789 3917
78 2766 2894 3022 3150 3278 3406 3534 3662 3790 3918
79 2767 2895 3023 3151 3279 3407 3535 3663 3791 3919
80 2768 2896 3024 3152 3280 3408 3536 3664 3792 3920
81 2769 2897 3025 3153 3281 3409 3537 3665 3793 3921
82 2770 2898 3026 3154 3282 3410 3538 3666 3794 3922
83 2771 2899 3027 3155 3283 3411 3539 3667 3795 3923
84 2772 2900 3028 3156 3284 3412 3540 3668 3796 3924
85 2773 2901 3029 3157 3285 3413 3541 3669 3797 3925
86 2774 2902 3030 3158 3286 3414 3542 3670 3798 3926
87 2775 2903 3031 3159 3287 3415 3543 3671 3799 3927
88 2776 2904 3032 3160 3288 3416 3544 3672 3800 3928
89 2777 2905 3033 3161 3289 3417 3545 3673 3801 3929
90 2778 2906 3034 3162 3290 3418 3546 3674 3802 3930
91 2779 2907 3035 3163 3291 3419 3547 3675 3803 3931
92 2780 2908 3036 3164 3292 3420 3548 3676 3804 3932
93 2781 2909 3037 3165 3293 3421 3549 3677 3805 3933
94 2782 2910 3038 3166 3294 3422 3550 3678 3806 3934
95 2783 2911 3039 3167 3295 3423 3551 3679 3807 3935
96 2784 2912 3040 3168 3296 3424 3552 3680 3808 3936
97 2785 2913 3041 3169 3297 3425 3553 3681 3809 3937
98 2786 2914 3042 3170 3298 3426 3554 3682 3810 3938
99 2787 2915 3043 3171 3299 3427 3555 3683 3811 3939
100 2788 2916 3044 3172 3300 3428 3556 3684 3812 3940
101 2789 2917 3045 3173 3301 3429 3557 3685 3813 3941
102 2790 2918 3046 3174 3302 3430 3558 3686 3814 3942
103 2791 2919 3047 3175 3303 3431 3559 3687 3815 3943
104 2792 2920 3048 3176 3304 3432 3560 3688 3816 3944
105 2793 2921 3049 3177 3305 3433 3561 3689 3817 3945
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
37
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
21 22 23 24 25 26 27 28 29 30 PE
LCO
UNIT
AD
DRES
S
106 2794 2922 3050 3178 3306 3434 3562 3690 3818 3946
107 2795 2923 3051 3179 3307 3435 3563 3691 3819 3947
108 2796 2924 3052 3180 3308 3436 3564 3692 3820 3948
109 2797 2925 3053 3181 3309 3437 3565 3693 3821 3949
110 2798 2926 3054 3182 3310 3438 3566 3694 3822 3950
111 2799 2927 3055 3183 3311 3439 3567 3695 3823 3951
112 2800 2928 3056 3184 3312 3440 3568 3696 3824 3952
113 2801 2929 3057 3185 3313 3441 3569 3697 3825 3953
114 2802 2930 3058 3186 3314 3442 3570 3698 3826 3954
115 2803 2931 3059 3187 3315 3443 3571 3699 3827 3955
116 2804 2932 3060 3188 3316 3444 3572 3700 3828 3956
117 2805 2933 3061 3189 3317 3445 3573 3701 3829 3957
118 2806 2934 3062 3190 3318 3446 3574 3702 3830 3958
119 2807 2935 3063 3191 3319 3447 3575 3703 3831 3959
120 2808 2936 3064 3192 3320 3448 3576 3704 3832 3960
121 2809 2937 3065 3193 3321 3449 3577 3705 3833 3961
122 2810 2938 3066 3194 3322 3450 3578 3706 3834 3962
123 2811 2939 3067 3195 3323 3451 3579 3707 3835 3963
124 2812 2940 3068 3196 3324 3452 3580 3708 3836 3964
125 2813 2941 3069 3197 3325 3453 3581 3709 3837 3965
126 2814 2942 3070 3198 3326 3454 3582 3710 3838 3966
127 2815 2943 3071 3199 3327 3455 3583 3711 3839 3967
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
38
5
10
15
20
25
30
35
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
31 32 33 34 35 36 37 38 39 40 PE
LCO
UNIT
ADD
RESS
1 3969 4097 4225 4353 4481 4609 4737 4865 4993 5121
2 3970 4098 4226 4354 4482 4610 4738 4866 4994 5122
3 3971 4099 4227 4355 4483 4611 4739 4867 4995 5123
4 3972 4100 4228 4356 4484 4612 4740 4868 4996 5124
3973 4101 4229 4357 4485 4613 4741 4869 4997 5125
6 3974 4102 4230 4358 4486 4614 4742 4870 4998 5126
7 3975 4103 4231 4359 4487 4615 4743 4871 4999 5127
8 3976 4104 4232 4360 4488 4616 4744 4872 5000 5128
9 3977 4105 4233 4361 4489 4617 4745 4873 5001 5129
3978 4106 4234 4362 4490 4618 4746 4874 5002 5130
11 3979 4107 4235 4363 4491 4619 4747 4875 5003 5131
12 3980 4108 4236 4364 4492 4620 4748 4876 5004 5132
13 3981 4109 4237 4365 4493 4621 4749 4877 5005 5133
14 3982 4110 4238 4366 4494 4622 4750 4878 5006 5134
3983 4111 4239 4367 4495 4623 4751 4879 5007 5135
16 3984 4112 4240 4368 4496 4624 4752 4880 5008 5136
17 3985 4113 4241 4369 4497 4625 4753 4881 5009 5137
18 3986 4114 4242 4370 4498 4626 4754 4882 5010 5138
19 3987 4115 4243 4371 4499 4627 4755 4883 5011 5139
3988 4116 4244 4372 4500 4628 4756 4884 5012 5140
21 3989 4117 4245 4373 4501 4629 4757 4885 5013 5141
22 3990 4118 4246 4374 4502 4630 4758 4886 5014 5142
23 3991 4119 4247 4375 4503 4631 4759 4887 5015 5143
24 3992 4120 4248 4376 4504 4632 4760 4888 5016 5144
3993 4121 4249 4377 4505 4633 4761 4889 5017 5145
26 3994 4122 4250 4378 4506 4634 4762 4890 5018 5146
27 3995 4123 4251 4379 4507 4635 4763 4891 5019 5147
28 3996 4124 4252 4380 4508 4636 4764 4892 5020 5148
29 3997 4125 4253 4381 4509 4637 4765 4893 5021 5149
3998 4126 4254 4382 4510 4638 4766 4894 5022 5150
31 3999 4127 4255 4383 4511 4639 4767 4895 5023 5151
32 4000 4128 4256 4384 4512 4640 4768 4896 5024 5152
33 4001 4129 4257 4385 4513 4641 4769 4897 5025 5153
34 4002 4130 4258 4386 4514 4642 4770 4898 5026 5154
4003 4131 4259 4387 4515 4643 4771 4899 5027 5155
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
39
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
31 32 33 34 35 36 37 38 39 40 PE
LCO
UN
IT A
DDR
ESS
36 4004 4132 4260 4388 4516 4644 4772 4900 5028 5156
37 4005 4133 4261 4389 4517 4645 4773 4901 5029 5157
38 4006 4134 4262 4390 4518 4646 4774 4902 5030 5158
39 4007 4135 4263 4391 4519 4647 4775 4903 5031 5159
40 4008 4136 4264 4392 4520 4648 4776 4904 5032 5160
41 4009 4137 4265 4393 4521 4649 4777 4905 5033 5161
42 4010 4138 4266 4394 4522 4650 4778 4906 5034 5162
43 4011 4139 4267 4395 4523 4651 4779 4907 5035 5163
44 4012 4140 4268 4396 4524 4652 4780 4908 5036 5164
45 4013 4141 4269 4397 4525 4653 4781 4909 5037 5165
46 4014 4142 4270 4398 4526 4654 4782 4910 5038 5166
47 4015 4143 4271 4399 4527 4655 4783 4911 5039 5167
48 4016 4144 4272 4400 4528 4656 4784 4912 5040 5168
49 4017 4145 4273 4401 4529 4657 4785 4913 5041 5169
50 4018 4146 4274 4402 4530 4658 4786 4914 5042 5170
51 4019 4147 4275 4403 4531 4659 4787 4915 5043 5171
52 4020 4148 4276 4404 4532 4660 4788 4916 5044 5172
53 4021 4149 4277 4405 4533 4661 4789 4917 5045 5173
54 4022 4150 4278 4406 4534 4662 4790 4918 5046 5174
55 4023 4151 4279 4407 4535 4663 4791 4919 5047 5175
56 4024 4152 4280 4408 4536 4664 4792 4920 5048 5176
57 4025 4153 4281 4409 4537 4665 4793 4921 5049 5177
58 4026 4154 4282 4410 4538 4666 4794 4922 5050 5178
59 4027 4155 4283 4411 4539 4667 4795 4923 5051 5179
60 4028 4156 4284 4412 4540 4668 4796 4924 5052 5180
61 4029 4157 4285 4413 4541 4669 4797 4925 5053 5181
62 4030 4158 4286 4414 4542 4670 4798 4926 5054 5182
63 4031 4159 4287 4415 4543 4671 4799 4927 5055 5183
64 4032 4160 4288 4416 4544 4672 4800 4928 5056 5184
65 4033 4161 4289 4417 4545 4673 4801 4929 5057 5185
66 4034 4162 4290 4418 4546 4674 4802 4930 5058 5186
67 4035 4163 4291 4419 4547 4675 4803 4931 5059 5187
68 4036 4164 4292 4420 4548 4676 4804 4932 5060 5188
69 4037 4165 4293 4421 4549 4677 4805 4933 5061 5189
70 4038 4166 4294 4422 4550 4678 4806 4934 5062 5190
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
40
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
31 32 33 34 35 36 37 38 39 40 PE
LCO
UN
IT A
DDR
ESS
71 4039 4167 4295 4423 4551 4679 4807 4935 5063 5191
72 4040 4168 4296 4424 4552 4680 4808 4936 5064 5192
73 4041 4169 4297 4425 4553 4681 4809 4937 5065 5193
74 4042 4170 4298 4426 4554 4682 4810 4938 5066 5194
75 4043 4171 4299 4427 4555 4683 4811 4939 5067 5195
76 4044 4172 4300 4428 4556 4684 4812 4940 5068 5196
77 4045 4173 4301 4429 4557 4685 4813 4941 5069 5197
78 4046 4174 4302 4430 4558 4686 4814 4942 5070 5198
79 4047 4175 4303 4431 4559 4687 4815 4943 5071 5199
80 4048 4176 4304 4432 4560 4688 4816 4944 5072 5200
81 4049 4177 4305 4433 4561 4689 4817 4945 5073 5201
82 4050 4178 4306 4434 4562 4690 4818 4946 5074 5202
83 4051 4179 4307 4435 4563 4691 4819 4947 5075 5203
84 4052 4180 4308 4436 4564 4692 4820 4948 5076 5204
85 4053 4181 4309 4437 4565 4693 4821 4949 5077 5205
86 4054 4182 4310 4438 4566 4694 4822 4950 5078 5206
87 4055 4183 4311 4439 4567 4695 4823 4951 5079 5207
88 4056 4184 4312 4440 4568 4696 4824 4952 5080 5208
89 4057 4185 4313 4441 4569 4697 4825 4953 5081 5209
90 4058 4186 4314 4442 4570 4698 4826 4954 5082 5210
91 4059 4187 4315 4443 4571 4699 4827 4955 5083 5211
92 4060 4188 4316 4444 4572 4700 4828 4956 5084 5212
93 4061 4189 4317 4445 4573 4701 4829 4957 5085 5213
94 4062 4190 4318 4446 4574 4702 4830 4958 5086 5214
95 4063 4191 4319 4447 4575 4703 4831 4959 5087 5215
96 4064 4192 4320 4448 4576 4704 4832 4960 5088 5216
97 4065 4193 4321 4449 4577 4705 4833 4961 5089 5217
98 4066 4194 4322 4450 4578 4706 4834 4962 5090 5218
99 4067 4195 4323 4451 4579 4707 4835 4963 5091 5219
100 4068 4196 4324 4452 4580 4708 4836 4964 5092 5220
101 4069 4197 4325 4453 4581 4709 4837 4965 5093 5221
102 4070 4198 4326 4454 4582 4710 4838 4966 5094 5222
103 4071 4199 4327 4455 4583 4711 4839 4967 5095 5223
104 4072 4200 4328 4456 4584 4712 4840 4968 5096 5224
105 4073 4201 4329 4457 4585 4713 4841 4969 5097 5225
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
41
Table D. Pelco Unit Address (Continued)
TXB-B ADDRESS
31 32 33 34 35 36 37 38 39 40 PE
LCO
UNIT
AD
DRES
S
106 4074 4202 4330 4458 4586 4714 4842 4970 5098 5226
107 4075 4203 4331 4459 4587 4715 4843 4971 5099 5227
108 4076 4204 4332 4460 4588 4716 4844 4972 5100 5228
109 4077 4205 4333 4461 4589 4717 4845 4973 5101 5229
110 4078 4206 4334 4462 4590 4718 4846 4974 5102 5230
111 4079 4207 4335 4463 4591 4719 4847 4975 5103 5231
112 4080 4208 4336 4464 4592 4720 4848 4976 5104 5232
113 4081 4209 4337 4465 4593 4721 4849 4977 5105 5233
114 4082 4210 4338 4466 4594 4722 4850 4978 5106 5234
115 4083 4211 4339 4467 4595 4723 4851 4979 5107 5235
116 4084 4212 4340 4468 4596 4724 4852 4980 5108 5236
117 4085 4213 4341 4469 4597 4725 4853 4981 5109 5237
118 4086 4214 4342 4470 4598 4726 4854 4982 5110 5238
119 4087 4215 4343 4471 4599 4727 4855 4983 5111 5239
120 4088 4216 4344 4472 4600 4728 4856 4984 5112 5240
121 4089 4217 4345 4473 4601 4729 4857 4985 5113 5241
122 4090 4218 4346 4474 4602 4730 4858 4986 5114 5242
123 4091 4219 4347 4475 4603 4731 4859 4987 5115 5243
124 4092 4220 4348 4476 4604 4732 4860 4988 5116 5244
125 4093 4221 4349 4477 4605 4733 4861 4989 5117 5245
126 4094 4222 4350 4478 4606 4734 4862 4990 5118 5246
127 4095 4223 4351 4479 4607 4735 4863 4991 5119 5247
The TXB-B translator board uses the same address switch position settings as the Pelco unit.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
42
5
10
15
20
25
30
Table E. Address Switch Settings
SWITCH SETTINGS
1 2 3 4 5 6 7 8 TX
B-B
ADD
RESS
AN
D PE
LCO
UNIT
AD
DRES
S
0 OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF
OFF ON OFF ON OFF OFF OFF OFF
11 ON ON OFF ON OFF OFF OFF OFF
12 OFF OFF ON ON OFF OFF OFF OFF
13 ON OFF ON ON OFF OFF OFF OFF
14 OFF ON ON ON OFF OFF OFF OFF
ON ON ON ON OFF OFF OFF OFF
16 OFF OFF OFF OFF ON OFF OFF OFF
17 ON OFF OFF OFF ON OFF OFF OFF
18 OFF ON OFF OFF ON OFF OFF OFF
19 ON ON OFF OFF ON OFF OFF OFF
OFF OFF ON OFF ON OFF OFF OFF
21 ON OFF ON OFF ON OFF OFF OFF
22 OFF ON ON OFF ON OFF OFF OFF
23 ON ON ON OFF ON OFF OFF OFF
24 OFF OFF OFF ON ON OFF OFF OFF
ON OFF OFF ON ON OFF OFF OFF
26 OFF ON OFF ON ON OFF OFF OFF
27 ON ON OFF ON ON OFF OFF OFF
28 OFF OFF ON ON ON OFF OFF OFF
29 ON OFF ON ON ON OFF OFF OFF
OFF ON ON ON ON OFF OFF OFF
31 ON ON ON ON ON OFF OFF OFF
32 OFF OFF OFF OFF OFF ON OFF OFF
33 ON OFF OFF OFF OFF ON OFF OFF
34 OFF ON OFF OFF OFF ON OFF OFF
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
43
Table E. Address Switch Settings (Continued)
SWITCH SETTINGS
1 2 3 4 5 6 7 8 TX
B-B
AD
DRES
S AN
D PE
LCO
UNIT
ADD
RESS
35 ON ON OFF OFF OFF ON OFF OFF
36 OFF OFF ON OFF OFF ON OFF OFF
37 ON OFF ON OFF OFF ON OFF OFF
38 ON OFF ON OFF OFF ON OFF OFF
39 OFF ON ON OFF OFF ON OFF OFF
40 OFF OFF OFF ON OFF ON OFF OFF
41 ON OFF OFF ON OFF ON OFF OFF
42 OFF ON OFF ON OFF ON OFF OFF
43 ON ON OFF ON OFF ON OFF OFF
44 OFF OFF ON ON OFF ON OFF OFF
45 ON OFF ON ON OFF ON OFF OFF
46 OFF ON ON ON OFF ON OFF OFF
47 ON ON ON ON OFF ON OFF OFF
48 OFF OFF OFF OFF ON ON OFF OFF
49 ON OFF OFF OFF ON ON OFF OFF
50 OFF ON OFF OFF ON ON OFF OFF
51 ON ON OFF OFF ON ON OFF OFF
52 OFF OFF ON OFF ON ON OFF OFF
53 ON OFF ON OFF ON ON OFF OFF
54 OFF ON ON OFF ON ON OFF OFF
55 ON ON ON OFF ON ON OFF OFF
56 OFF OFF OFF ON ON ON OFF OFF
57 ON OFF OFF ON ON ON OFF OFF
58 OFF ON OFF ON ON ON OFF OFF
59 ON ON OFF ON ON ON OFF OFF
60 OFF OFF ON ON ON ON OFF OFF
61 ON OFF ON ON ON ON OFF OFF
62 OFF ON ON ON ON ON OFF OFF
63 ON ON ON ON ON ON OFF OFF
64 OFF OFF OFF OFF OFF OFF ON OFF
65 ON OFF OFF OFF OFF OFF ON OFF
66 OFF ON OFF OFF OFF OFF ON OFF
67 ON ON OFF OFF OFF OFF ON OFF
68 OFF OFF ON OFF OFF OFF ON OFF
69 ON OFF ON OFF OFF OFF ON OFF
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
44
Table E. Address Switch Settings (Continued)
SWITCH SETTINGS
1 2 3 4 5 6 7 8 TX
B-B
AD
DRES
S AN
D PE
LCO
UNIT
ADD
RESS
70 OFF ON ON OFF OFF OFF ON OFF
71 ON ON ON OFF OFF OFF ON OFF
72 OFF OFF OFF ON OFF OFF ON OFF
73 ON OFF OFF ON OFF OFF ON OFF
74 OFF ON OFF ON OFF OFF ON OFF
75 ON ON OFF ON OFF OFF ON OFF
76 OFF OFF ON ON OFF OFF ON OFF
77 ON OFF ON ON OFF OFF ON OFF
78 OFF ON ON ON OFF OFF ON OFF
79 ON ON ON ON OFF OFF ON OFF
80 OFF OFF OFF OFF ON OFF ON OFF
81 ON OFF OFF OFF ON OFF ON OFF
82 OFF ON OFF OFF ON OFF ON OFF
83 ON ON OFF OFF ON OFF ON OFF
84 OFF OFF ON OFF ON OFF ON OFF
85 ON OFF ON OFF ON OFF ON OFF
86 OFF ON ON OFF ON OFF ON OFF
87 ON ON ON OFF ON OFF ON OFF
88 OFF OFF OFF ON ON OFF ON OFF
89 ON OFF OFF ON ON OFF ON OFF
90 OFF ON OFF ON ON OFF ON OFF
91 ON ON OFF ON ON OFF ON OFF
92 OFF OFF ON ON ON OFF ON OFF
93 ON OFF ON ON ON OFF ON OFF
94 OFF ON ON ON ON OFF ON OFF
95 ON ON ON ON ON OFF ON OFF
96 OFF OFF OFF OFF OFF ON ON OFF
97 ON OFF OFF OFF OFF ON ON OFF
98 OFF ON OFF OFF OFF ON ON OFF
99 ON ON OFF OFF OFF ON ON OFF
100 OFF OFF ON OFF OFF ON ON OFF
101 ON OFF ON OFF OFF ON ON OFF
102 OFF ON ON OFF OFF ON ON OFF
103 ON ON ON OFF OFF ON ON OFF
104 OFF OFF OFF ON OFF ON ON OFF
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
45
Table E. Address Switch Settings (Continued)
SWITCH SETTINGS
1 2 3 4 5 6 7 8 TX
B-B
ADD
RESS
AN
D PE
LCO
UNIT
ADD
RESS
105 ON OFF OFF ON OFF ON ON OFF
106 OFF ON OFF ON OFF ON ON OFF
107 ON ON OFF ON OFF ON ON OFF
108 OFF OFF ON ON OFF ON ON OFF
109 ON OFF ON ON OFF ON ON OFF
110 OFF ON ON ON OFF ON ON OFF
111 ON ON ON ON OFF ON ON OFF
112 OFF OFF OFF OFF ON ON ON OFF
113 ON OFF OFF OFF ON ON ON OFF
114 OFF ON OFF OFF ON ON ON OFF
115 ON ON OFF OFF ON ON ON OFF
116 OFF OFF ON OFF ON ON ON OFF
117 ON OFF ON OFF ON ON ON OFF
118 OFF ON ON OFF ON ON ON OFF
119 ON ON ON OFF ON ON ON OFF
120 OFF OFF OFF ON ON ON ON OFF
121 ON OFF OFF ON ON ON ON OFF
122 OFF ON OFF ON ON ON ON OFF
123 ON ON OFF ON ON ON ON OFF
124 OFF OFF ON ON ON ON ON OFF
125 ON OFF ON ON ON ON ON OFF
126 OFF ON ON ON ON ON ON OFF
127 ON ON ON ON ON ON ON OFF
REVISION HISTORY Manual # Date Comments C2431M 2/01 Original version. C2431M-A 3/01 Layout of board revised. C2431M-B 3/01 Revised illustrations. C2431M-C 5/01 Added switch settings for TXB-B addressing. C2431M-D 11/01 Revised description section and Figure 2. C2431M-E 10/02 Revised manual for Spectra III SE and Spectra III systems. C2431M-F 5/03 Added instructions for zone programming. C2431M-G 3/05 Added installation instructions for ExSite Integrated Positioning System. C2431M-H 5/06 Added Spectra Mini dome. Removed Spectra II. Updated graphics and procedures. C2431M-I 4/07 Added Green Label, cross references, and Spectra IV. Added Important Safety Instructions.
C2431M-I (4/07)
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
46
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on fiber optic products and TW3000 Series unshielded twisted pair transmission products. • Three years on Spectra® IV products. • Three years on Genex® Series products (multiplexers, server, and keyboard). • Three years on Camclosure® and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and
MC3651H-2X camera models, which have a five-year warranty. • Three years on PMCL200/300/400 Series LCD monitors. • Two years on standard motorized or fixed focal length lenses. • Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed dome products. • Two years on Spectra III™, Esprit®, ExSite®, and PS20 scanners, including when used in continuous motion applications. • Two years on Esprit and WW5700 Series window wiper (excluding wiper blades). • Two years (except lamp and color wheel) on Digital Light Processing (DLP®) displays. The lamp and color wheel will be covered for a period of
90 days. The air filter is not covered under warranty. • Eighteen months on DX Series digital video recorders, NVR300 Series network video recorders, and Endura™ Series distributed network-based video
products. • One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months. • Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes). Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty. Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise. The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state. If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information: 1. Model and serial number 2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number 3. Details of the defect or problem If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written explanation with the product when returned. Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.
RETURNS In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair). All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge. Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid. Ship to the appropriate address below. If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:
Service Department Pelco 3500 Pelco Way Clovis, CA 93612-5699
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed to return goods to the USA, you may do one of the following:
If the goods are to be sent by a COURIER SERVICE, send the goods to: If the goods are to be sent by a FREIGHT FORWARDER, send the goods to: Pelco Pelco c/o Expeditors 3500 Pelco Way 473 Eccles Avenue Clovis, CA 93612-5699 USA South San Francisco, CA 94080 USA
Phone: 650-737-1700 Fax: 650-737-0933
Pelco, the Pelco logo, Camclosure, Esprit, ExSite, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and Spectra III are trademarks of Pelco. DLP is a registered trademark of Texas Instruments, Inc. AutoDome and Allegiant are registered trademarks of Bosch Security Systems Inc. ©Copyright 2007, Pelco. All rights reserved.
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
Worldwide Headquarters 3500 Pelco Way
Clovis, California 93612 USA
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com
ISO9001
Australia | Canada | Finland | France | Germany | Italy | Macau | The Netherlands | Russia | Singapore
South Africa | Spain | Sweden | United Arab Emirates | United Kingdom | United States
Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com
top related