parametric analysis and design engine for tall building...
Post on 12-Oct-2020
3 Views
Preview:
TRANSCRIPT
01-Jun-18
1
Parametric Analysis and Design Engine for Tall Building Structures
Goman HO, Arup Fellow
Structural Engineering: Backbone of Built Environment,
31 May 2018, Siam Kempinski Hotel
2 Mahanakhon (304m)
01-Jun-18
2
3
4
From 2D to 2D CAD
01-Jun-18
3
5
From 2D to 3D
6
Architectural Vs BIM Vs Structural Models
(With courtesy of Studio PeiZhu)
01-Jun-18
4
7
From 2D to 3D and BIM
8
2010 Winner – Bentley Delivery Process Innovation Using BIM
Marina Bay Sands (2007)
01-Jun-18
5
9
Hong Kong Airport Midfield Development (2011)
2012 Winner – Bentley BIM Innovation in Airports
2013 Winner – Autodesk Hong Kong BIM Award
10
From 3D to 4D or xD
Hong Kong Sludge Treatment Facility
01-Jun-18
6
1
1
11 Buildings completed with computers
12
Synchronised drawings – Structure
Taipei Pop Music Centre (2012)
• Building setting-out
• Streamlined shop drawings production
01-Jun-18
7
1
4
14
Parametric Modelling
15
Parametric Technology in Metal Stamping
01-Jun-18
8
16
Parametric Models
17
Geometry object defined by parameters and component
01-Jun-18
9
18
Building Objects
19
Structural Element Objects
• Mega column
• Mega Braces
• Transfer Trusses
• Core
• Beams
• Slabs
01-Jun-18
10
20
Bracing pattern can be changed by just updating some of the key parameters
21
Study Options for Bracing and Belt Trusses
01-Jun-18
11
23
Extracting of the story framing plan by scripts
2
4
24
Parametric Modeling and
Computer Design Optimization (CDO)
01-Jun-18
12
25
Parametric modeling to generate different structure systems
Column space as
design variable
26
Virtual work analysis results for different schemes
01-Jun-18
13
27
Ensure Consistency & Quality @ Rapid Design Changes
28
Results comparison and evaluation
0%
50%
100%
150%
200%
250%
5 6 7 8 9 10 11 12 13 14 15 16 17
cost
client's Satisfaction
Satisfaction/cost ratio
Member sections are controlled by lower boundary, such as strength, buckling.
Not feasible for concrete frame under limited beam depth. Large steel ratio required for SRC frame so cost increase sharply.
Best choice to balance the client’s preference and structure cost.
Client can make the decision if the cost is acceptable to them.
01-Jun-18
14
29
Typical Floor Layout
Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 0
Observation Zone
Mega-Column
Mega-Brace
Belt Truss
(7 in total)
Office
Zone 1 to 7
Observation Zone
Zone 0
Lobby
Corner Truss
Bottom Brace
Zone 0
Belt Truss
Top Truss
Reinforced
Concrete Core
Crown
Structural System- China Zun (528m)
30
Varied Functions
01-Jun-18
15
31
• Examples of architect massing variations
Parametric Model Overview
Architectural/External Input
Top dimension
variationWaist size
32
• Examples of architect massing variations
Parametric Model Overview
Architectural/External Input
Corner radius variation
01-Jun-18
16
33
^ Tower waist change
^ Tower radius &
Slab meshing change
^ Façade clearance change
Beijing Z15 中国尊 (528m tall, 108 storeys, 7 storeys basement)
34
The Column-line: Orientation
Angle
Larger Angle
beneficial:
- Larger stiffness
adverse:
- Larger façade-structure distance
01-Jun-18
17
35
Value Engineering Floor-by-floor Measure
Minimise “unfavourable” area
up to 8,700m2
= 2 additional stories
= 1 billion HK$
36
• 854 Options Evaluated
Time Saving
Design Changes…Traditional
Parametric
Time
First Model
Design Changes…First Model
01-Jun-18
18
37
37
Seismic Design –
Linear Models for Wind and Seismic,
Push-over, Nonlinear Time History Analysis
3
8
38
01-Jun-18
19
3
9
39
40
40
Analysis and Design Engine (ADE)
01-Jun-18
20
41
• General layout drawings for plan and elevation;
• Linear model for code base design with graphical analysis results for
visualization and presentation;
• Nonlinear keyword file for LS-Dyna analysis to ensure the structures will not
collapse in severe earthquake (i.e. performance check);
• Connection geometry in IGES for Finite Element Processing including Pre-
processing in generating meshing, analysis and post-processing.
• 3D connection shop drawings in X-Steel format for fabrication.
• Detailed section definition.
• More modules could be added….
Analysis and Design Engine (ADE)
42
Frameworks for Analysis and Design Engine (ADE)
01-Jun-18
21
43
Finite Element Model generated by ADE
44
FE analysis results after optimization
01-Jun-18
22
45
3D image and construction drawings generated by ADE
46
Detailed composite section definition by ADE
01-Jun-18
23
47
Erection of the Mega Column
48
Mega Column (11.5m x 5.2m) of 597m tall TJ 117
01-Jun-18
24
49
TJ117
597m
Successful Examples
China Zun
528m
50
• Arup DTX Fund 5977 - The design and construction guidelines for
connections of composite structures.
Acknowledgement
01-Jun-18
25
5
1
51
Thank You
goman.ho@arup.com
52
top related