panelview plus terminals
Post on 09-Dec-2016
237 Views
Preview:
TRANSCRIPT
-
Selection Guide
Visualization Solutions
PanelView Plus Terminals
PanelView Component Terminals
Industrial Computers and Monitors
www.klinkmann.com6 / 2011
http://literature.rockwellautomation.com/idc/groups/literature/documents/td/ic-td001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/td/2711c-td001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/td/2711p-td005_-en-p.pdf
-
2 Rockwell Automation Publication VIEW-SG001F-EN-P - October 2010
Whats Inside
This selection guide is meant to help make initial decisions for the visualization products best suited for your system requirements. For detailed technical specifications, certifications, and environmental specifications, see the documentation links on the front cover of this selection guide.
For assistance and validation in making final product selections, consider using the Configuration and Selection tools available at http://www.rockwellautomation.com/en/e-tools/index.html
Topic Page
Visualization Platforms 4
HMI Terminal Comparison 6
PanelView Plus Terminals 7
Typical Configurations 8
PanelView Plus 6 Terminals 10
PanelView Plus 400 and 600 Terminals 16
PanelView Plus Compact Terminals 19
PanelView Component Terminals 26
Industrial Computers and Monitors 30
Typical Configurations 31
Integrated Display Computers 32
Integrated Display Computers with Keypad 37
Hazardous Location Computers 39
Non-display Computers 40
Compact Non-display Computers 43
Industrial Monitors 45
HMI Software 48
www.klinkmann.com6 / 2011
http://www.rockwellautomation.com/en/e-tools/index.html
-
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 3
Introduction
Adding Visualization to Your Control System
As a machine builder or end user, you design control solutions with an eye toward improving safety, higher levels of performance and efficiency, and better integration with the rest of the manufacturing operation. To achieve these goals, you need a scalable, modular control system that offers safety, throughput and information management capabilities to match each applications requirements.
The Rockwell Automation Integrated Architecture system is unique in that it offers scalable, integrated safety, motion control, and visualization capabilities that are ideal for machine builders and end users who want a single control and development environment, regardless of the application size or complexity.
The visualization products comprise a suite of scalable HMI software and operator interface hardware that provide plant floor machine operators, supervisors, engineers, and business managers a window to critical data, and production and process information. And all this can be done from the plant floor or remotely from a web browser.
Whether its a machine-level or site-level HMI, a Windows CE platform, a smaller component HMI, or an industrial computer, Rockwell Automation has a portfolio of visualization solutions to match your system requirements.
PanelView Plus terminals, FactoryTalk View Machine Edition, and FactoryTalk View Site Edition provide premier integration in a number of ways.
Reduce programming time with Logix native addressing and the ability to browse directly to Logix tags without creating a separate database.
Simplifies interaction of all networks with support for all Core Integrated Architecture CIP networks including EtherNet/IP, ControlNet, and numerous other drivers.
Simplifies development time with pre-engineered, pre-tested faceplates for specific motion, drives, and process applications.
www.klinkmann.com6 / 2011
-
Visualization Platforms www.klinkmann.com6 / 2011
Visualization Platforms
PanelView Plus Family PanelView Component Family
page 26page 7
Select an Operator Interface
Do you need: Machine-level HMI with
FactoryTalk View ME? Dedicated platform? Component level HMI?
Yes
No
Machine-level HMI
Do you need a machine-level HMI? Small to large applications FactoryTalk View ME software ControlLogix or CompactLogix controllers
Do you need a component-level HMI?: Small applications Web-based software MicroLogix, SLC controller, or device
Select a PanelView ComponentConsider: Display size Monochrome or color display Operator input Communication With or without battery backup
Select a PanelView PlusConsider: Windows CE desktop access Remote access and file viewers Display size Operator input Power requirements Communication Environmental requirements
Select Accessories Cables
Select FactoryTalk View ME software Optional communication module Accessories Cables
For technical specifications, certifications, and environmental specifications on the PanelView Plus terminals, refer to the PanelView Plus Specifications Technical Data, publication 2711P-TD005
For technical specifications, certifications, and environmental specifications on the PanelView Component terminals, refer to the PanelView Component Specifications Technical Data, publication 2711C-TD001
4 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
http://literature.rockwellautomation.com/idc/groups/literature/documents/td/2711p-td005_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/td/2711c-td001_-en-p.pdf
-
Visualization Platformswww.klinkmann.com6 / 2011
Industrial MonitorsIntegrated Display Computers Non-display Computers
Select Accessories
Performance page 45
Standard page 45
Non-displaypage 40
Compact Non-displaypage 43
Integrated Displaypage 32
Display with Keypadpage 37
Select an Industrial Computer
Do you need: Site-level HMI with
FactoryTalk View SE? Open platform? Processing power of an
industrial computer?
Yes
Hazardous Location Computers
Select FactoryTalk View software if needed Accessories
Hazardous Locationpage 39
Select FactoryTalk View software if needed Accessories
Site-level HMI
HMI Servers
FactoryTalkData Server
Data Servers
Do you need: Integrated display? Integrated display with keypad? Rockwell Software and
third-party software?
Do you need: Extended temperature range? Class 1 Div 2 certification? Rockwell Software and
third-party software?
Do you need: Computer without a display? Compact form factor option? Rockwell Software and
third-party software?
Do you need: Monitor only? Class 1 Div 2 certification? Standard industrial environment?
Select a Display ComputerConsider: Display size and input method Resistive touch screen Solid-state or hard-disk drive Standard or performance options Operating system Power requirements Bezel type
Select Hazardous Location Computer
Consider: Computer with display Computer without display
Select a Non-display ComputerConsider: Environmental requirements Compact form factor Solid-state or hard-disk drive Power requirements Operating system Mounting method Standard or performance options
Select a MonitorConsider: Environment Display size Touch screen option Bezel type Mounting method
Select FactoryTalk View Software if needed Accessories
For technical specifications, certifications, and environmental specifications on the industrial computers and monitors, refer to the Industrial Computers and Monitors Specifications Technical Data, publication IC-TD001.
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 5
http://literature.rockwellautomation.com/idc/groups/literature/documents/td/ic-td001_-en-p.pdf
-
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 6
HMI Terminal Comparison
HMI Terminal Comparison This table provides a quick glance at comparisons between the different HMI terminal platforms.
Table 1 - HMI Terminal Comparison
Characteristic 2711P PanelView Plus 6700, 1000, 1250, 15002711P PanelView Plus
400, 6002711P PanelView Plus Compact 400, 600, 1000
2711C PanelView ComponentC200, C300, C600, C1000
Display 700: 6.5 in. color TFT1000: 10.4 inch color TFT1250: 12.1 in. color TFT1500: 15 in. color TFT
400: 3.5 in. color, 400: 3.8 in. grayscale600: 5.5 in. color TFT600: 5.5 in. grayscale TFT
400: 3.5 in. color400: 3.8 in. grayscale600: 5.5 in. color TFT100: 10.4 in. color TFT
C200: 2 in. monoC300: 3 in. monoC600: 5.7 in. color or monoC1000: 10.4 in. color
Input type All models: keypadAll models: touch screenAll models: key/touch
400: key/touch (3.5 in.)400: keypad (3.8 in.)600: touch screen
400: key/touch (3.5 in.)400: keypad (3.8 in.)600/1000: touch screen
C200: 4-keys C200: 10-keys+numeric C300: 10-keys/+numeric C600/C1000: touch screen
Built-in communication ports
RS-232EtherNet2 USB host and 1 USB device
RS-232EtherNet1 USB
RS-232EtherNet1 USB: 400/6002 USB: 1000
RS-232RS-422/RS-4851 USB host and 1 USB deviceEtherNet: C600/C1000C only
Add-on communication module
DH+DH-485ControlNet
DH+DH-485ControlNet
None None
Serial communication RS-232: DF1 or DH-485 RS-232: DF1 or DH-485 RS-232: DF1 or DH-485 RS-232: DF1 full-duplex, DH-485, multivendor optionsRS-485
Programming software FactoryTalk View ME 6.0 or laterViewPoint web server 1.2 or later
FactoryTalk View ME 5.1 or earlier FactoryTalk View ME 5.1 or later Web-enabled softwareresident in terminalPC-based emulator available
Operating system Windows CE 6.0 operating systemsupports this features: FTP Server VNC client/server PDF reader Active X controls Third-party device support
Additional functionality is available by ordering terminals with optional extended features(1) Internet Explorer web browser Remote desktop connection Media player File viewers for Microsoft Office
Word, PowerPoint, and Excel WordPad text editor
None None None
Open or closed system Open or closed desktop Closed Closed Closed
Memory 512 MB nonvolatile flash/512 MB RAM 64 MB nonvolatile flash/64 MB RAM 64 MB nonvolatile flash/64 MB RAM 20 MB nonvolatile flash/20 MB RAM
External storage Secure Digital (SD) cardUSB flash drives
CompactFlash CompactFlash USB flash: C200/C300USB flash/SD card: C600/C1000
Power AC or DC AC or DC DC DC
Preferred controller ControlLogix CompactLogix CompactLogix MicroLogix, SLC, PowerFlex 4 drive, Micro800
Capabilities High memory capacity desktop access enabled or disabled Multi-network/multivendor
connectivity Alarm messages (email alarms) Recipes Trending Data logging
Multi-network/multivendor connectivity
Alarm messages Recipes Trending Data logging
Single controller 25 displays 200 alarm messages Recipes Trending Data logging
Single device
-
PanelView Plus Terminalswww.klinkmann.com6 / 2011
PanelView Plus Terminals PanelView Plus devices give operators a clear view into monitoring and controlling applications. With FactoryTalk View Machine Edition already installed and activated, development time is reduced. The PanelView Plus family of products provides a broad range of rugged terminals that offer the following:
Premier integration with the Integrated Architecture platform Real-time monitoring of a terminals displays from a web browser Common development software Scalable 4 to 15-inch displays with a touch screen, keypad, or both
Figure 1 - Selecting a PanelView Plus Platform
Internet ExplorerRemote desktop connectionMicrosoft Office file viewersWordPad text editorMedia player (MPEG)
PanelView Plus 6 Terminals with extended features
See page 10
PanelView Plus 400 and 600 Terminals
See page 16
PanelView Plus Compact Terminals
See page 19
> 6-inch displayAccess to CE desktopWeb browser/file viewersRemote accessPDF readerMultiple apps
Do you need any of these?
Yes
No
Yes
Multiple controllers?> 25 displays> 200 alarms< 6-inch display?
Yes
No
For complete technical specifications, certifications, and environmental specifications on the PanelView Plus terminals, refer to the PanelView Plus Specifications Technical Data, publication 2711P-TD005
Do you need any of these?
No
Do you need any of these?
Cat. No. 2711P-xxxx9 or 2711P-RP9x
Cat. No. 2711P-xxxx8 or 2711P-RP8x
PanelView Plus 6 Terminals without extended features
See page 10
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 7
http://literature.rockwellautomation.com/idc/groups/literature/documents/td/2711p-td005_-en-p.pdf
-
PanelView Plus Terminals www.klinkmann.com6 / 2011
Typical Configurations Figure 2 shows a configuration where a PanelView Plus terminal is used with a Logix controller in standalone or machine-level mode using serial connectivity.
Figure 2 - Standalone Machine
In Figure 3, a PanelView Plus Compact terminal and the 1769-L3x CompactLogix system provide an integrated solution for midsize applications. Typically, these applications are machine-level control applications that require smaller I/O quantities and more communication capabilities than serial connectivity.
Figure 3 - Midsize Application
To Business Systems
8 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
PanelView Plus Terminalswww.klinkmann.com6 / 2011
In Figure 4, a PanelView Plus 6 terminal communicates with all devices by using EtherNet/IP communication. A Logix controller along with a Kinetix 300 servo drive offer a scalable power platform cost-sensitive applications, such as simple packaging machinery, indexing tables, automatic assembly equipment, tool changing machinery, and feed and withdrawal equipment.
Figure 4 - Indexing Motion
To Business Systems
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 9
-
PanelView Plus Terminals www.klinkmann.com6 / 2011
PanelView Plus 6 Terminals This platform use modular components with value-added options for flexible system configuration. These components are usable across the entire PanelView Plus 6 platform and install with minimal effort:
Color display modules ranging from 6.5 to 15-inches in size with either key, touch screen, or combination key/touch-screen input
Windows CE logic modules providing desktop access Optional communication modules for network communication
Configured terminals with a display module and logic module can be ordered as a single catalog number or as separate components for field installation.
A high-bright display for outdoor use, plus conformal-coated and marine-certified components, extend this platforms ability to operate in environments with even more stringent and varying requirements.
The core component of this platform is the high-performance logic module that runs a closed or open Windows CE desktop environment with optional, extended features and file viewers. System integrators and OEMs can configure and deploy systems that allow or restrict desktop access.
Table 2 - Logic Module Features
Features Description
High memory capacity 512 MB nonvolatile flash and 512 MB RAM
Power input AC or DC
Network interface For optional DH+, DH-485, or ControlNet communication module
Communication ports Ethernet, RS-232 serial
USB ports 2 USB host ports for connecting a USB mouse, keyboard, printer, and USB flash drives that are hot swappable1 USB device port for connecting a host personal computer
Secure Digital (SD) card slot Hot-swappable card slot supports 1784-CDx SD cards for transferring files, upgrading firmware, or logging data
Operating system All terminals run the Windows CE 6.0 operating system (OS) providing OS functionality needed for most users needs: FTP server VNC client/server PDF reader Active X controls Third-party device support
Additional functionality is available by ordering terminals with optional, extended features: Internet Explorer web browser Remote desktop connection Media player Microsoft file viewers for PowerPoint, Excel, and Word WordPad text editor PDF reader
FactoryTalk View software FactoryTalk View Machine Edition software, version 6.0 or later, is preloaded and activated on each terminal
Single license support for FactoryTalk ViewPoint software, version 1.2 or later, gives remote users access to a terminals displays via standard web browser
HMI applications are developed with FactoryTalk View Studio for Machine Edition software, which is purchased separately
OptionalExtended Features
10 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
PanelView Plus Terminalswww.klinkmann.com6 / 2011
Product SelectionsBulletinNumber
InputType
Display Size
Display Type Communication Power Operating System Special Option
| | | | | | |
2711P- K = Keypad 7 = 6.5 in. C = Color 4 = Ethernet, RS-232 & (2) USB A = AC 8 = Windows CE 6.0 operating system K = Conformal-coated
T = Touch 10 = 10.4 in. D = DC 9 = Windows CE 6.0 operating systemwith extended features
B = Keypad/Touch 12 = 12.1 in.
15 = 15 in.
Table 3 - PanelView Plus 6 Terminals without Extended Features
Cat. No. Display Communication Input Power
Nonvolatile Flash/RAM MemoryKeypad Touch Keypad/Touch Size Type RS-232 Ethernet
700 Model
2711P-K7C4D8 2711P-T7C4D8 2711P-B7C4D8 6.5-in. Color DC 512 MB/512 MB
2711P-T7C4D8K(1) DC 512 MB/512 MB
2711P-K7C4A8 2711P-T7C4A8 2711P-B7C4A8 AC 512 MB/512 MB
1000 Model
2711P-K10C4D8 2711P-T10C4D8 2711P-B10C4D8 10.4-in Color DC 512 MB/512 MB
2711P-K10C4A8 2711P-T10C4A8 2711P-B10C4A8 AC 512 MB/512 MB
1250 Model
2711P-K12C4D8 2711P-T12C4D8 2711P-B12C4D8 12.1-in Color DC 512 MB/512 MB
2711P-T12C4D8K(1) DC 512 MB/512 MB
2711P-K12C4A8 2711P-T12C4A8 2711P-B12C4A8 AC 512 MB/512 MB
1500 Model
2711P-K15C4D8 2711P-T15C4D8 2711P-B15C4D8 15-in. Color DC 512 MB/512 MB
2711P-K15C4A8 2711P-T15C4A8 2711P-B15C4A8 AC 512 MB/512 MB
(1) Conformal-coated terminal.
Table 4 - PanelView Plus 6 Terminals with Extended Features
Cat. No. Display Communication Input Power
Nonvolatile Flash/RAM MemoryKeypad Touch Keypad/Touch Size Type RS-232 Ethernet
700 Model
2711P-K7C4D9 2711P-T7C4D9 2711P-B7C4D9 6.5-in. Color DC 512 MB/512 MB
2711P-K7C4A9 2711P-T7C4A9 2711P-B7C4A9 AC 512 MB/512 MB
1000 Model
2711P-K10C4D9 2711P-T10C4D9 2711P-B10C4D9 10.4-in Color DC 512 MB/512 MB
2711P-K10C4A9 2711P-T10C4A9 2711P-B10C4A9 AC 512 MB/512 MB
1250 Model
2711P-K12C4D9 2711P-T12C4D9 2711P-B12C4D9 12.1-in Color DC 512 MB/512 MB
2711P-K12C4A9 2711P-T12C4A9 2711P-B12C4A9 AC 512 MB/512 MB
1500 Model
2711P-K15C4D9 2711P-T15C4D9 2711P-B15C4D9 15-in. Color DC 512 MB/512 MB
2711P-K15C4A9 2711P-T15C4A9 2711P-B15C4A9 AC 512 MB/512 MB
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 11
-
PanelView Plus Terminals www.klinkmann.com6 / 2011
Accessories
Tables 517 list accessories for the PanelView Plus 6 terminals. Display modules, logic modules, and communication modules can be ordered as separate components for field installation.
Table 5 - Display Modules
Cat. No. Input Type Display Marine CertifiedConformal
CoatedBuilt-in
Antiglare Overlay
700 Model
2711P-RDK7C Keypad 7-in. color
2711P-RDK7CK Keypad
2711P-RDT7C Touch
2711P-RDT7CK Touch
2711P-RDT7CM Touch
2711P-RDB7C Keypad/Touch
2711P-RDB7CK Keypad/Touch
2711P-RDB7CM Keypad/Touch
1000 Model
2711P-RDK10C Keypad 10-4 in. color
2711P-RDT10C Touch
2711P-RDT10CM Touch
2711P-RDB10C Keypad/Touch
2711P-RDB10CM Keypad/Touch
1250 Model
2711P-RDK12C Keypad 12.1-in. color
2711P-RDK12CK Keypad
2711P-RDT12C Touch
2711P-RDT12CK Touch
2711P-RDT12AG Touch
2711P-RDT12H(1)
(1) This catalog number is a high-bright display module, indicated by the H at end of cat. no., that is designed for outdoor applications. The high-bright display module can be used only with DC-powered logic modules.
Touch
2711P-RDB12C Keypad/Touch
2711P-RDB12CK Keypad/Touch
1500 Model
2711P-RDK15C Keypad 15-in. color
2711P-RDT15C Touch
2711P-RDT15AG Touch
2711P-RDB15C Keypad/Touch
12 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
PanelView Plus Terminalswww.klinkmann.com6 / 2011
Table 6 - Logic Modules
Cat. No. Power InputNonvolatile Flash/
RAM Memory CommunicationConformal
Coated Included Software
Logic Modules without Extended Features
2711P-RP8A AC 512 MB/512 MB Ethernet RS-232 Network interface for
communication module
Windows CE 6.0 operating system without extended features/file viewers
FactoryTalk View Machine Edition runtime, version 6.0 or later
FactoryTalk ViewPoint software, version 1.2 or later
2711P-RP8D DC 512 MB/512 MB
2711P-RP8DK DC 512 MB/512 MB
Logic Modules with Extended Features
2711P-RP9A AC 512 MB/512 MB Ethernet RS-232 Network interface
communication module
Windows CE 6.0 operating system with extended features/file viewers
FactoryTalk View Machine Edition runtime, version 6.0 or later
FactoryTalk ViewPoint software, version 1.2 or later
2711P-RP9D DC 512 MB/512 MB
2711P-RP9DK DC 512 MB/512 MB
Table 7 - Communication Modules
Cat. No.Communication Conformal
CoatedMarine CertifiedDH+ DH-485 ControlNet (1)
(1) Scheduled and unscheduled communication.
2711P-RN6
2711P-RN6K
2711P-RN15S
2711P-RN15SK
Table 8 - Secure Digital (SD) Cards
Cat. No. Description
1784-SD1 1 GB Secure Digital (SD) card
1784-SD2 2 GB Secure Digital (SD) card
2711C-RCSD USB to SD adapter for secure digital card (SD)
Table 9 - Programming Cable
Cat. No. Description Length
2711C-CBL-UU02 USB host to USB device programming cable 2 m (6.5 ft)
Table 10 - Function Key Legend Inserts
Cat. No.PanelView Plus 6 Terminal Model(1)
(1) Applies to keypad and keypad/touch-screen terminals.
Includes
2711P-RFK7 700 keypad
Blank legend inserts and software
2711P-RFK10 1000 keypad
2711P-RFK12 1250 keypad
22711P-RFK15 1500 keypad
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 13
-
PanelView Plus Terminals www.klinkmann.com6 / 2011
Table 11 - Antiglare Overlays
Cat. No.(1)
(1) Three overlays are shipped with each catalog number.
PanelView Plus 6 Terminal Model
Operator Input
Keypad Touch Key/Touch
2711P-RGK7700
2711P-RGT7
2711P-RGK101000
2711P-RGT10
2711P-RGK121250
2711P-RGT12
2711P-RGK151500
2711P-RGT15
Table 12 - Solar Visor
Cat. No. Description
2711P-RVT12 Solar visor for 1250 high-bright display module, cat. no. 2711P-RDT12H
Table 13 - Mounting Hardware
Cat. No. Description Quantity
2711P-RTMC Mounting clips 8
Table 14 - Battery Replacement
Cat. No. Description Quantity
2711P-RY2032 Replacement battery 1
Table 15 - Power Supply and Power Terminal Blocks
Cat. No. Description Quantity
2711P-RSACDIN DIN-rail power supply, AC-to-DC, 85265V AC, 4763 Hz 1
2711P-RTBAC3 AC power terminal block 10
2711P-RTBDC2 2-pin DC power terminal block 10
14 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
PanelView Plus Terminalswww.klinkmann.com6 / 2011
Table 16 - Backlight Replacements
Cat. No. PanelView Plus 6 Display Module Size SeriesNumber of Backlights
2711P-RL7C 700 A and B 1
2711P-RL7C2 C and D 1
2711P-RL10C 1000 A 1
2711P-RL10C2 B and C 1
2711P-RL12C 1250 A and B 2
2711P-RL12C2 C 1
2711P-RL15C 1500 B 2
Table 17 - Bezel Replacements
Cat. No. PanelView Plus 6 Terminal ModelOperator Input
Keypad Touch Key/Touch
2711P-RBK7
700
2711P-RBT7
2711P-RBB7
2711P-RBK10
1000
2711P-RBT10
2711P-RBB10
2711P-RBK12
1250
2711P-RBT12
2711P-RBT12H(1)
(1) Applies to the cat. no. 2711P-RDT12H 1250 high-bright display module.
2711P-RBB12
2711P-RBK15
1500
2711P-RBT15
2711P-RBB15
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 15
-
PanelView Plus Terminals www.klinkmann.com6 / 2011
PanelView Plus 400 and 600 Terminals
The smaller PanelView Plus 400 and 600 terminals combine a 4 or 6-inch display in the same base unit with the logic, memory, power, and operator input. Color or grayscale displays render images as 18-bit color or 32 levels of gray. Flexible input options include keypad, touch screen, or combination keypad/touch screen. Other key features include the following:
Unique mounting mechanism requiring no tools and a single die-cut Replaceable labels for terminal or system identification Function key legend kit and software for customizing the function keys
legends on the 600 keypad terminals Two base-configured units provide support for either RS-232 or RS-232
and Ethernet communication.
Product Selections
Table 18 - PanelView Plus 400 and 600 Terminal Configurations
RS-232 Unit Ethernet and RS-232 Unit
RS-232 serial port USB port for keyboard, mouse, or other
USB device CompactFlash slot for file transfers, data
logging, or system upgrades
RS-232 serial port 10/100BaseT Ethernet port USB port for keyboard, mouse or other USB device CompactFlash slot for file transfers, data logging,
or system upgrades Network interface for optional communication
DH+, DH-485, or ControlNet module
BulletinNumber Input Type Display Size Display Type Communication Power
| | | | | |
2711P- K = Keypad 4 = 3.5 or 3.8 in. C = Color 5 = RS-232 & USB A = AC
B = Keypad/Touch 6 = 5.5 in. M=Grayscale 20 = Ethernet, RS-232, & USB pluscommunication module interface
D = DC
Table 19 - PanelView Plus 400 Terminals
Cat. No. Display Communication Input Power Flash/RAMKeypad Keypad/Touch Size Type RS-232 Ethernet Module
2711P-K4M5D 3.8-in. Grayscale DC 64 MB/64 MB
2711P-K4M5A AC 64 MB/64 MB
2711P-K4M20D (1) DC 64 MB/64 MB
2711P-K4M20A (1) AC 64 MB/64 MB
2711P-K4C5D 2711P-B4C5D 3.5-in. Color DC 64 MB/64 MB
2711P-K4C5A 2711P-B4C5A AC 64 MB/64 MB
2711P-K4C20D 2711P-B4C20D (1) DC 64 MB/64 MB
2711P-K4C20A 2711P-B4C20A (1) AC 64 MB/64 MB
(1) Catalog numbers have a network interface for an optional communication module.
16 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
PanelView Plus Terminalswww.klinkmann.com6 / 2011
Accessories
Tables 2126 lists accessories for the PanelView Plus 400 and 600 terminals.
Table 20 - PanelView Plus 600 Terminals
Cat. No. Display Communication Input Power Flash/RAMKeypad Touch Keypad/Touch Size Type RS-232 Ethernet Module
2711P-K6M5D 2711P-T6M5D 2711P-B6M5D 5.5-in. Grayscale DC 64 MB/64 MB
2711P-K6M5A 2711P-T6M5A 2711P-B6M5A AC 64 MB/64 MB
2711P-K6M20D 2711P-T6M20D 2711P-B6M20D (1) DC 64 MB/64 MB
2711P-K6M20A 2711P-T6M20A 2711P-B6M20A (1) AC 64 MB/64 MB
2711P-K6C5D 2711P-T6C5D 2711P-B6C5D 5.5-in. Color TFT DC 64 MB/64 MB
2711P-K6C5A 2711P-T6C5A 2711P-B6C5A AC 64 MB/64 MB
2711P-K6C20D 2711P-T6C20D 2711P-B6C20D (1) DC 64 MB/64 MB
2711P-K6C20A 2711P-T6C20A 2711P-B6C20A (1) AC 64 MB/64 MB
(1) Catalog numbers have a network interface for an optional communication module.
Table 21 - Communication Modules
Cat. No.Communication
DH+ DH-485 ControlNet(1)
(1) Scheduled and unscheduled communication.
RS-232 Isolated
2711P-RN3
2711P-RN8
2711P-RN15C
2711P-RN22C
Table 22 - Antiglare Overlays
Cat. No.(1)
(1) Three overlays are shipped with each catalog number.
Terminal ModelInput Type
Keypad Touch Key/Touch
2711P-RGK4 400 Grayscale
2711P-RGB4 400 Color
2711P-RGK6600 Grayscale or Color
2711P-RGT6
Table 23 - CompactFlash Cards
Cat. No. Description
2711P-RC3 256 MB blank CompactFlash card
2711P-RC4 512 MB blank CompactFlash card
2711P-RCH CompactFlash to PCMCIA adapter
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 17
-
PanelView Plus Terminals www.klinkmann.com6 / 2011
Table 24 - Power Terminal Blocks
Cat. No. Description Quantity
2711P-RVAC AC power terminal block 10
2711P-TBDC DC power terminal block 10
Table 25 - Mounting Hardware
Cat. No. Description Quantity
2711P-RTFC Mounting levers 8
Table 26 - Function Key Legend Inserts
Cat. No. Terminal Model Includes
2711P-RFK6 600 keypad and keypad/touch Blank legend inserts and software
18 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
PanelView Plus Terminalswww.klinkmann.com6 / 2011
PanelView Plus Compact Terminals
The PanelView Plus Compact 400, 600, and 1000 terminals offer just the right hardware and software functionality to meet the needs of midsize applications. Any application created for a compact terminal is also compatible with the PanelView Plus terminals. Key features include the following:
Preferred HMI integration with CompactLogix controllers RS-232 serial port, Ethernet port, USB port (two on 1000 model), DC
power, and CompactFlash Type 1 slot Serial and Ethernet communication Connection to single controller by using either RSLinx Enterprise
software, version 5.20 or later, or KEPServer software 25 displays and 200 alarm messages supported in the FactoryTalk View
Compact Machine Edition application Fixed hardware configurations without the addition or replacement of
modular components
Product Selections
This table lists the fixed hardware configurations available for the PanelView Plus Compact terminals.
Table 27 - PanelView Plus Compact
Cat. No. Input TypeDisplay Communication Input
Power Flash/RAMSize Type RS-232 Ethernet
2711PC-K4M20D Keypad 3.8-in. Grayscale DC 64 MB/64 MB
2711PC-B4C20D Keypad/Touch 3.5-in. Color DC 64 MB/64 MB
2711PC-T6M20D Touch 5.5-in Grayscale DC 64 MB/64 MB
2711PC-T6C20D Touch 5.5-in Color DC 64 MB/64 MB
2711PC-T10C4D1 Touch 10.4-in Color DC 64 MB/64 MB
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 19
-
PanelView Plus Terminals www.klinkmann.com6 / 2011
AccessoriesTables 28 33 lists accessories for the PanelView Plus Compact terminals.
Table 28 - CompactFlash Cards
Cat. No. Description
2711P-RC3 256 MB blank CompactFlash card
2711P-RC4 512 MB blank CompactFlash card
2711P-RCH CompactFlash to PCMCIA adapter
Table 29 - Antiglare Overlays
Cat. No.(1)
(1) Three overlays are shipped with each catalog number.
Terminal ModelInput Type
Keypad Touch Key/Touch
2711P-RGK4 400 Grayscale
2711P-RGB4 400 Color
2711P-RGT6 600 Grayscale or Color
2711P-RGT10 1000 Color
Table 30 - Backlight Replacement
Cat. No. Description Number of Backlights
2711P-RL10C2 Replacement color backlight for the 1000 series B/C displays 1
Table 31 - Bezel Replacement
Cat. No. Description
2711P-RBT10 Replacement bezel for the 1000 touch terminal
Table 32 - Mounting Hardware
Cat. No. Terminal Model Description Quantity
2711P-RTFC 400 and 600 Mounting levers 8
2711P-RTMC 1000 Mounting clips 8
Table 33 - Power Terminal Blocks
Cat. No. Terminal Model Description Quantity
2711P-TBDC 400 and 600 DC power terminal block 10
2711P-RTBDC2 700 to 1500 2-pin DC power terminal block 10
20 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
PanelView Plus Terminalswww.klinkmann.com6 / 2011
Communication Cables The table provides a general list of cables used by the PanelView Plus terminals. All PanelView Plus terminals use a standard Ethernet cable for application transfers between a computer and the terminal.
PanelView Plus Runtime CablesTables 3538 list required runtime cables for PanelView Plus 400/600 and PanelView Plus 6 (700, 1000, 1250, 1500) terminals.
Table 34 - Cables
Cat. No. Description Length
2711C-CBL-UU02(1)
(1) This cable is used only by PanelView Plus 6 terminals.
USB host to USB device programming cable 2 m (6.5 ft)
2711-NC13 RS-232 operating/program cable, 9-pin D-shell to 9-pin D-shell 5 m (16.4 ft)
2711-NC14 RS-232 operating/program cable, 9-pin D-shell to 9-pin D-shell 10 m (32.7 ft)
2711-NC17 Remote RS-232 cable assembly, 9-pin D-shell to 9-pin D-shell 3 m (10 ft)
2711-NC21 RS-232 operating cable, 9-pin D-shell to 8-pin mini DIN 5 m (16.4 ft)
2711-NC22 RS-232 operating cable, 9-pin D-shell to 8-pin mini DIN 15 m (49 ft)
1761-CBL-AS03DH-485 network cable, 6-pin Phoenix to RJ45
3 m (10 ft)
1761-CBL-AS09 9 m (30 ft)
2711P-CBL-EX04 Ethernet CAT5 crossover cable 4.3 m (14 ft)
Table 35 - Runtime Communication Cables: PanelView Plus Terminals to SLC Controllers
Protocol PanelView Plus Comm Port400, 600, 700, 1000, 1250, 1500SLC 500, 5/01, 5/02
CH1 RJ45 (DH-485)
SLC 5/03, 5/04, 5/05CH0 (9-pin RS-232)
(DF1 or DH-485)
SLC 5/03CH1 (RJ45)
(DH-485)SLC 5/04
CH1 (DH+)SLC 5/05
CH1 (ENET)
DF1 RS-232 (DF1) port (9-pin)PanelView Plus 400 to 15002711P-RN22C (for 400 and 600 only)
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
DH-485
RS-232 (DH-485) port (9-pin)PanelView Plus 400 to 15002711P-RN22C (for 400 and 600 only)
Use AIC+ module(1761-NET-AIC) to
connect to port 1 or 2
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
Use AIC+ Module(1761-NET-AIC) to
connect to port 1 or 2
DH-485 portPanelView Plus 400 and 600Requires 2711P-RN3(1)
1747-C10 (2 m/6 ft) 1747-C11 (0.3 m/1 ft)1747-C20 (6 m/20 ft)
Use AIC+ module(1761-NET-AIC)
to connect to port 3
1747-C10 (2 m/6 ft) 1747-C11 (0.3 m/1 ft)1747-C20 (6 m/20 ft)
DH-485 portPanelView Plus 700 to 1500Requires 2711P-RN6, 2711P-RN6K
1761-CBL-AS03 (3 m/10 ft)
1761-CBL-AS09 (9 m/30 ft)
Use AIC+ module(1761-NET-AIC)
to connect to port 3
1761-CBL-AS03 (3 m/10 ft)
1761-CBL-AS09 (9 m/30 ft)
ControlNet
ControlNet portPanelView Plus 400 and 600Requires 2711P-RN15CPanelView Plus 700 to 1500Requires 2711P-RN15S, 2711P-RN15SK
EtherNet/IP EtherNet/IP portPanelView Plus 400 to 1500
Use 1761-NET-ENI modulewith Ethernet cable
1585J-M type cable or
2711P-CBL-EX04 (4 m/14 ft) (2)
DH+ DH+ portPanelView Plus 400 and 600Requires 2711P-RN8PanelView Plus 700 to 1500Requires 2711P-RN6, 2711P-RN6K
Shielded
twinaxialcable (1770-CD)
(1) For CE compliance, use the 1761-NET-AIC or 1747-AIC module for cable lengths longer than 30 m (98 ft).(2) EtherNet/IP direct connection from the terminal to an SLC 5/05 controller requires an Ethernet switch or the 2711P-CBL-EX04 crossover cable.
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 21
-
PanelView Plus Terminals www.klinkmann.com6 / 2011
Table 36 - Runtime Communication Cables: PanelView Plus Terminals to PLC-5 and MicroLogix Controllers
Protocol PanelView Plus Comm Port400, 600, 700, 1000, 1250, 1500PLC-5, PLC-5C, PLC-5E
CH0 (25-pin RS-232)(DF1)
MicroLogix 1400, 1500LRPCH1/CH2 (9-pin RS-232)
(DF1 or DH-485)
MicroLogix 1000, 1100, 1200, 1400, 1500LSP
CH0 (8-pin Mini DIN)(DF1 or DH-485)
MicroLogix 1100, 1400 Ethernet
DF1 RS-232 (DF1) port (9-pin)PanelView Plus 400 to 15002711P-RN22C (for 400 and 600 only)
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
(9-to-25 pin adapter required)
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
2711-NC21 (5 m/16 ft)2711-NC22 (15 m/49 ft) (3)
DH-485
RS-232 (DH-485) port (9-pin)PanelView Plus 400 to 15002711P-RN22C (for 400 and 600 only)
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
2711-NC21 (5 m/16 ft)2711-NC22 (15 m/49 ft)
DH-485 portPanelView Plus 400 and 600Requires 2711P-RN3(1)PanelView Plus 700 to 1500Requires 2711P-RN6, 2711P-RN6K
Use AIC+ module(1761-NET-AIC)
to connect to port 3
ControlNet
ControlNet portPanelView Plus 400 and 600Requires 2711P-RN15CPanelView Plus 400 to 1500Requires 2711P-RN15S or 2711P-RN15SK
To PLC-5C with ControlNet cable
EtherNet/IPEtherNet/IP portPanelView Plus 400 to 1500
To PLC-5E with1585J-M type cable or
2711P- CBL-EX04 (4 m/14 ft) (2)Use 1761-NET-ENI module
with Ethernet cable1585J-M type cable or
2711P- CBL-EX04 (4 m/14 ft) (2)
DH+ DH+ portPanelView Plus 400 and 600Requires 2711P-RN8PanelView Plus 700 to 1500Requires 2711P-RN6, 2711P-RN6K
Shielded twinaxial cable(1770-CD)
(1) For CE compliance, use the 1761-NET-AIC or 1747-AIC module for cable lengths longer than 30 m (98 ft).(2) For a direct connection between the terminal and the controller use the 2711P-CBL-EX04 crossover cable.(3) The AIC+ module is recommended for isolation purposes when the terminal and controller are not on same power supply.
Table 37 - Runtime Communication Cables: PanelView Plus Terminals to Logix Controllers
Protocol PanelView Plus Comm Port400, 600, 700, 1000, 1250, 1500ControlLogix
CH0 (9-pin RS-232)(DF1)
CompactLogixCH0 (9-pin RS-232)
(DF1 or DH-485)
DF1 RS-232 (DF1) port (9-pin)PanelView Plus 400 to 15002711P-RN22C (for 400 and 600 only)
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)2706-NC13 (3 m/10 ft)
DH-485
RS-232 (DH-485) port (9-pin)PanelView Plus 400 to 15002711P-RN22C (for 400 and 600 only)
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)2706-NC13 (3 m/10 ft)
DH-485 portPanelView Plus 400 and 600Requires 2711P-RN3(1)PanelView Plus 700 to 1500Requires 2711P-RN6, 2711P-RN6K
Use AIC+ module(1761-NET-AIC)
to connect to port 3
ControlNet
ControlNet portPanelView Plus 400 and 600Requires 2711P-RN15CPanelView Plus 700 to 1500Requires 2711P-RN15S, 2711P-RN15SK
Use 1756-CNB module with ControlNet cable1769-L35CR, 1769-L32C, 1768-CNB, or 1768-CNBR
with ControlNet cable
EtherNet/IPEtherNet/IP portPanelView Plus 400 to 1500
Use 1756-EN2T or 1756-ENBT module with1585J-M type cable or
2711P- CBL-EX04 (4 m/14 ft)(2)
To 1769-L35E, 1769-L23E, 1769-L32E, or 1768-ENBT module with 1585J-M type cable
or 2711P- CBL-EX04 (4 m/14 ft)(2)
DH+ DH+ portPanelView Plus 400 and 600Requires 2711P-RN8PanelView Plus 700 to 1500Requires 2711P-RN6, 2711P-RN6K
Use 1756-DHRIO module with
shielded twinaxial cable (1770-CD)
(1) For CE compliance, use the 1761-NET-AIC or 1747-AIC module for cable lengths longer than 30 m (98 ft).(2) For a direct connection between the terminal and controller, use the 2711P-CBL-EX04 crossover cable.
22 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
PanelView Plus Terminalswww.klinkmann.com6 / 2011
Table 38 - Runtime Communication Cables: PanelView Plus Terminals to Interface Modules
ProtocolPanelView Plus Comm Port
400, 600700, 1000, 1250, 1500
1747-AIC1761-NET-AIC 1771-NET-ENI
Port 1 (9-pin) Port 2(8-pin Mini DIN)Port 3
(DH-485)Port 2
(8-pin Mini DIN)
DF1 RS-232 port (9-pin)PanelView Plus 400 to 15002711P-RN22C (for 400 and 600)
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
2711-NC21 (5 m/16 ft)2711-NC22 (15 m/49 ft)Null modem required
1761-CBL-AP00 (5 m)1761-CBL-PM02 (2 m)2711-CBL-PM05 (5 m)2711-CBL-PM10 (10 m)
DH-485
RS-232 port (9-pin)PanelView Plus 400 to 15002711P-RN22C (for 400 and 600)
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)2711-NC21 (5 m/16 ft)2711-NC22 (15 m/49 ft) Null modem required
DH-485 portPanelView Plus 400 and 600Requires 2711P-RN3(1)
1747-C10 (2 m/6ft) 1747-C11 (0.3 m/1 ft)1747-C20 (6 m/20 ft)
1761-CBL-AS03 (3 m/10 ft)1761-CBL-AS09 (9 m/30 ft)
to single AIC+
DH-485 portPanelView Plus 700 to 1500Requires 2711P-RN6 or 2711P-RN6K
Direct connection to single AIC with
Belden 9842 cable(2)
Direct connection to single AIC+ with
Belden 9842 cable(2)
(1) For CE compliance, use the 1761-NET-AIC or 1747-AIC module for cable lengths longer than 30 m (98 ft).(2) Use serial port on the PanelView Plus terminal with an AIC+ module for a DH-485 network solution.
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 23
-
PanelView Plus Terminals www.klinkmann.com6 / 2011
PanelView Plus Compact Runtime Cables
Tables 3942 lists required cables for runtime communication between PanelView Plus Compact controllers and controllers.
Table 39 - Runtime Communication Cables: PanelView Plus Compact Terminals to SLC Controllers
Protocol PanelView Plus Compact400, 600, 1000 Comm PortSLC 500, 5/01, 5/02
CH1 RJ45 (DH-485)
SLC 5/03, 5/04, 5/05CH0 (9-pin RS-232)
(DF1 or DH-485)
SLC 5/03CH1 (RJ45)
(DH-485)SLC 5/04
CH1 (DH+)SLC 5/05
CH1 (ENET)
DF1 RS-232 (DF1) Comm port (9-pin) 2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
DH-485 RS-232 (DH-485) Comm port (9-pin)Use AIC+ module(1761-NET-AIC) to
connect to port 1 or 2
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
Use AIC+ module(1761-NET-AIC) to
connect to port 1 or 2
EtherNet/IP EtherNet/IP Comm port Use 1761-NET-ENI modulewith Ethernet cable
2711P- CBL-EX04 Ethernet crossover cable (1)
(1) An EtherNet/IP direction connection between a PanelView Plus Compact terminal and an SLC 5/05 requires hub or crossover cable listed.
Table 40 - Runtime Communication Cables: PanelView Plus Compact Terminals to MicroLogix Controllers
Protocol PanelView Plus Compact400, 600, 1000 Comm PortMicroLogix 1500LRPCH1 (9-pin RS-232)
(DF1 or DH-485)
MicroLogix 1000, 1200, 1500LSPCH0 (8-pin Mini DIN)
(DF1 or DH-485)MicroLogix 1100, 1400
Ethernet Port
DF1 RS-232 (DF1) Comm port (9-pin)2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)2711-NC21 (5 m/16 ft)
2711-NC22 (15 m/49 ft) (1)
DH-485 RS-232 (DH-485) Comm port (9-pin)2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)2711-NC21 (5 m/16 ft)
2711-NC22 (15 m/49 ft) (1)
EtherNet/IP EtherNet/IP Comm portUse 1761-NET-ENI module
with Ethernet cable1585J-M type cable or
2711P-CBL-EX04 cable (4 m/14 ft)(2)
(1) AIC+ Module recommended for isolation when PanelView and controller are not using same power supply.(2) For a direct connection between the terminal and controller, use the 2711P-CBL-EX04 crossover cable
Table 41 - Runtime Communication Cables: PanelView Plus Compact Terminals to Logix Controllers
Protocol PanelView Plus Compact400, 600, 1000 Comm PortControlLogix
CH0 (9-pin RS-232)(DF1)
CompactLogixCH0 (9-pin RS-232)
(DF1 or DH-485)
DF1 RS-232 (DF1) Comm port (9-pin)2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
DH-485 RS-232 (DH-485) Comm port (9-pin) 2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
EtherNet/IP EtherNet/IP Comm portUse 1756-EN2T or 1756-ENBT module
with 1585J-M type cable or 2711P-CBL-EX04 cable (4 m/14 ft)(1)
To 1769-L35E, 1769-L23E, 1769-L32E with1585J-M type cable or
2711P-CBL-EX04 cable (4 m/14 ft)(1)
(1) For a direct connection between the terminal and controller, use the 2711P-CBL-EX04 crossover cable.
Table 42 - Runtime Communication Cables: PanelView Plus Compact Terminals to Network Modules
Protocol PanelView Plus Compact400, 600, 1000 Comm Port
1761-NET-AIC
Port 1 (9-pin) Port 28-pin Mini DINPort 3
(DH-485)
DF1 RS-232 Comm port (9-pin)2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)2711-NC21 (5 m/16 ft)
2711-NC22 (15 m/49 ft)
DH-485 RS-232 Comm port (9-pin)2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2711-NC21 (5 m/16 ft)2711-NC22 (15 m/49 ft)
24 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
PanelView Plus Terminalswww.klinkmann.com6 / 2011
PanelView Plus Migration Path
The PanelView Plus platforms provide a clear migration path for replacing older terminals. When migrating to a new platform, consider both the display size and the unit size. PanelView Plus terminals uses the same panel cutouts as existing PanelView products, yet offer a larger display. For instance, a PanelView Plus 6, 1250 terminal with a 12.1-inch display fits into the same cutout as a PanelView 1000 or 1000e with a 10.4-inch display. When choosing a terminal with the same display size, adapter plates are used to adapt the cutout of the new terminal.
Table 43 - PanelView Plus Replacement Terminals
PanelView Standard Terminal PanelView Plus Replacement Terminal Adapter Plate RequiredAdapter Plate Cat.
No.
PanelView Standard 300 or 300 Micro None available(1)
PanelView 550 or 600 touch PanelView Plus or PanelView Plus Compact 400 keypad or keypad/touchPanelView Plus or PanelView Plus Compact 600 touch No
PanelView 550 keypadPanelView 550 keypad/touch
PanelView Plus 600 keypad or keypad/touch No
PanelView Plus PanelView Plus Compact 400 keypad or keypad/touchPanelView Plus PanelView Plus Compact 600 touch Yes 2711P-RAK4
PanelView 600 keypadPanelView 600 keypad/touch
PanelView Plus 600 keypad or keypad/touch Yes 2711P-RAK6
PanelView Plus 6, 700 keypad or keypad/touch No
PanelView 900 keypadPanelView Plus 6, 700 keypad or keypad/touch Yes 2711P-RAK7
PanelView Plus 6, 1000 keypad or keypad/touch No
PanelView 900 touchPanelView Plus 6, 700 touch Yes 2711P-RAT7
PanelView Plus 6 or PanelView Plus Compact 1000 touch No
PanelView 1000 keypadPanelView Plus 6, 1000 keypad or keypad/touch Yes 2711P-RAK10
PanelView Plus 6, 1250 keypad or keypad/touch No
PanelView 1000 touchPanelView Plus 6 or PanelView Plus Compact 1000 touch Yes 2711P-RAT10
PanelView Plus 6, 1250 touch No
PanelView 1400 keypadPanelView Plus 6, 1250 keypad or keypad/touch Yes 2711P-RAK12S
PanelView Plus 6, 1500 keypad or keypad/touch No
PanelView1400e keypadPanelView Plus 6, 1500 keypad or keypad/touch(2) Yes 2711P-RAK15
None available
PanelView 1400 touch PanelView Plus 6, 1250 touch Yes 2711P-RAT12S
PanelView Plus 6, 1500 touch No
PanelView 1400e touchPanelView Plus 6,1500 touch(2) Yes 2711P-RAT15
None available
PanelView 1200, 1200e/1400e Keypad PanelView Plus 6,1250 keypad(2) Yes RAK12E
None available
PanelView 1200, 1200e Touch PanelView Plus 6,1250 touch(3) Yes RAT12E
None available
PanelView 1200/1200E touch PanelView Plus 6,1250 touch(3) Yes 2711P-RAT12E2
None available
(1) Replace the PanelView Standard 300 or 300 Micro with a PanelView Plus 400 keypad terminal by increasing the size of the current panel cutout.(2) Adapter plate required for stud-mounted terminals.(3) Requires modification of panel cutout.
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 25
-
PanelView Component Terminals www.klinkmann.com6 / 2011
PanelView Component Terminals
This component level operator interface provides a control and visualization solution for low-level applications by using serial or Ethernet communication. Preferred controllers are the Micrologix, SLC, and Micro800 controllers plus you can connect directly to component devices such as the PowerFlex 4 drives.
This platform offers a full line of 2- to 10-inch displays with touch or function key input. Plus, the integrated mounting clips on the terminal simplifies panel installation and maintenance. Other key features include the following:
Design software resident in the terminal means no additional software to install on your computer.
Secured programming access protects applications from unauthorized modifications.
Unicode language switching in languages such as Russian, Greek, Chinese, Japanese, and Korean.
Alarm messages with embedded variables and history. Recipe capability lets you upload and download groups of data or
parameter settings.
For complete technical specifications, certifications, and environmental specifications on the PanelView Component terminals, refer to the PanelView Component Specifications Technical Data, publication 2711C-TD001.
Software
The built-in programming software is accessed from a web browser over a USB or Ethernet connection. This means you can design your application and adjust terminal settings while viewing the results directly on the connected terminal. For those times when a PanelView Component terminal is not available, you can still create an application by using the free emulator.
Typical Configuration
A PanelView Component terminal is typically connected to a MicroLogix controller or another component, such as a PowerFlex 4 drive, over an Ethernet or serial connection.
Ethernet or Serial Connection
26 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
http://literature.rockwellautomation.com/idc/groups/literature/documents/td/2711c-td001_-en-p.pdf
-
PanelView Component Terminalswww.klinkmann.com6 / 2011
Product Selections
Product Accessories
Tables 4548 list accessories for the PanelView Component terminals.
BulletinNumber Input Type Display Size Display Type
| | |
2711C- F = Function keys 2 = 2 in. C = Color
K= Keypad and function keys 3 = 3 in. M = Grayscale
T = Touch screen 6 = 6 in. T = TFT Color
10 = 10 in.
Table 44 - PanelView Component Terminals
Cat. NoDisplay
Input TypeCommunication
Power Size Type Serial(1) Ethernet
C200 Model
2711C-F2M2-in. Monochrome STN display
4 function keys 24V DC
2711C-K2M 10 function keys and numeric keypad 24V DC
C300 Model
2711C-T3M3-in. Monochrome FSTN display
Touch screen 24V DC
2711C-K3M 10 function keys and numeric keypad 24V DC
C600 Model
2711C-T6M
6 in.
Monochrome FSTN display Touch screen 24V DC
2711C-T6C Color CSTN display Touch screen 24V DC
2711C-T6T Color TFT display Touch screen 24V DC
C1000 Model
2711C-T10C 10 in. Color TFT display Touch screen 24V DC
(1) Serial refers to RS-232 (DF1), RS-232 (DH-485), RS-485 communication.
Table 45 - Antiglare Overlays
Cat. No.(1)
(1) Three overlays are shipped with each catalog number.
PanelView Component Model
Input Type
Function Key Numeric Keypad Touch
2711C-RG2F C200
C300
2711C-RG2K C200
C300
2711C-RG6T C600
2711C-RG10T C1000
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 27
-
PanelView Component Terminals www.klinkmann.com6 / 2011
Communication Cables
This table summarizes cables used by the PanelView Component terminals.
Table 46 - Memory Cards
Cat. No. Description
2711C-RCSD USB to Secure Digital (SD) adapter for SD card
Table 47 - Power Terminal Blocks
Cat. No. Description Quantity
2711C-RJ422 RS-422/RS-485 connector with resistor 10
2711-TBDC DC power terminal block 10
Table 48 - Power Supply
Cat. No. Description Quantity
2711P-RSACDIN DIN-rail mount AC-to-DC power supply, 85265V AC, 4763 Hz 1
Table 49 - Cables and Adapters
Cat. No. Description Connectors Length
2711C-CBL-UU02 USB host to USB device programming cable. 2 m (6.5 ft)
2711C-CBL-AB03 RS-485 (5-pin) to RJ45 operating/programming cable for connecting PanelView Component terminals to SLC 5/01, 5/02, 5/03 controllers.
RS-485 (5-pin) to RJ45
1747-CP3 Operating/programming cable for connecting PanelView Component terminals to SLC and MicroLogix controllers.
9-pin D-shell to 9-pin D-shell null modem cable
3 m (10 ft)
1761-CBL-PM02 RS-232 operating/programming cable for connecting PanelView Component terminals to MicroLogix controllers.
9-pin D-shell to 8-pin mini DIN 2 m (6.5 ft)
2711-CBL-PM05 RS-232 operating/programming cable for connecting PanelView Component terminals to MicroLogix controllers. 9-pin D-shell to 8-pin mini DIN
5 m (16.4 ft)
2711-CBL-PM10 RS-232 operating/programming cable for connecting PanelView Component terminals to MicroLogix controllers. 9-pin D-shell to 8-pin mini DIN
10 m (32.7 ft)
2711P-CBL-EX04 Ethernet CAT5 crossover cable for use with PanelView Component C600 and C1000 terminals. RJ45 to RJ45
4.3 m (14 ft)
1761-NET-AIC AIC+ advanced interface converter, RS-232/RS-485.
28 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
PanelView Component Terminalswww.klinkmann.com6 / 2011
Tables 5053 lists required cables for runtime communication between the PanelView Component terminals and controllers.
Table 50 - Runtime Communication Cables: PanelView Component Terminals to SLC Controllers
Protocol PanelView Component Comm PortSLC-500, 5/01, 5/02
CH1 RJ45 (DH-485)
SLC-5/03, 5/04, 5/05CH0 (9-pin RS-232)
(DF1 or DH-485)
SLC 5/03CH1 (RJ45)
(DH-485)SLC 5/04
CH1 (DH+)SLC 5/05
CH1 (ENET)
DF1 RS-232 (DF1) port (9-pin) 1747-CP3 (3 m/10 ft)
DH-485RS-232 (DH-485) port (9-pin)
Use AIC+ Module(1761-NET-AIC) to
connect to port 1 or 21747-CP3 (3 m/10 ft)
Use AIC+ Module(1761-NET-AIC) to
connect to port 1 or 2
RS-485 (DH-485) port (5-pin) 2711C-CBL-AB03(1) 2711C-CBL-AB03(1)
EtherNet/IP EtherNet/IP port Use 1761-NET-ENI module
with Ethernet cable
1585J-M type cable or 2711P- CBL-EX04
(4 m/14 ft) (2)
(1) The AIC+ module is recommended for isolation purposes when the terminal and controller are not on the same power supply.(2) For a direct connection between the terminal and controller, use the 2711P-CBL-EX04 crossover cable.
Table 51 - Runtime Cables: PanelView Component Terminals to MicroLogix Controllers
Protocol PanelView Component Comm PortMicroLogix 1400, 1500LRP
CH1/CH2 (9-pin RS-232)(DF1 or DH-485)
MicroLogix 1000, 1100, 1200, 1400, 1500LSPCH0 (8-pin Mini DIN)
(DF1 or DH-485)MicroLogix 1100, 1400
Ethernet
DF1 RS-232 (DF1) port (9-pin) 1747-CP3 (3 m/10 ft)1761-CBL-PM02 (2 m/6.5 ft)2711-CBL-PM05 (5 m/16 ft)
2711-CBL-PM10 (10 m/12 ft) (1)
DH-485 RS-232 (DH-485) port (9-pin) 1747-CP3 (3 m/10 ft)1761-CBL-PM02 (2 m/6.5 ft)2711-CBL-PM05 (5 m/16 ft)
2711-CBL-PM10 (10 m/12 ft) (1)
EtherNet/IP EtherNet/IP PortUse 1761-NET-ENI module
with Ethernet cable1585J-M type cable or
2711P- CBL-EX04 (4 m/14 ft) (2)
(1) The AIC+ module is recommended for isolation purposes when the terminal and controller are not on same power supply.(2) For a direct connection between the terminal and controller, use the 2711P-CBL-EX04 crossover cable.
Table 52 - Runtime Cables: PanelView Component Terminals to CompactLogix Controllers
Protocol PanelView Component Comm PortCompactLogix
CH0 (9-pin RS-232)(DF1 or DH-485)
DF1 RS-232 (DF1) port (9-pin)2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
DH-485 RS-232 (DH-485) port (9-pin)2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
EtherNet/IP EtherNet/IP port 1585J-M type cable or 2711P- CBL-EX04 (4 m/14 ft) (1)
(1) For a direct connection between the terminal and controller, use the 2711P-CBL-EX04 crossover cable.
Table 53 - Runtime Cables: PanelView Component Terminals to Interface Modules
ProtocolPanelView Plus
Comm Port1761-NET-AICPort 1 (9-pin)
1761-NET-AICPort 2 (8-pin Mini DIN()
1761-NET-AICPort 3 (DH-485)
DF1 RS-232 port (9-pin) 1747-CP3 (3 m/10 ft)1761-CBL-PM02 (2 m/6.5 ft)2711-CBL-PM05 (5 m/16 ft)
2711-CBL-PM10 (10 m/12 ft)
DH-485 RS-232 port (9-pin) 1747-CP3 (3 m/10 ft)1761-CBL-PM02 (2 m/6.5 ft)2711-CBL-PM05 (5 m/16 ft)
2711-CBL-PM10 (10 m/12 ft)
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 29
-
Industrial Computers and Monitors www.klinkmann.com6 / 2011
Industrial Computers and Monitors
The industrial computers and monitors are built with high-grade components that are critical to the safety and success of applications in demanding industrial environments:
Seamless integration with the full suite of Rockwell Software solutions, including the Integrated Architecture platform and FactoryTalk View software
Utilities for system backup and restore, hardware analysis, and troubleshooting
Unit-level immediate exchange program to reduce downtime
Figure 5 - Selecting an Industrial Computer
Hazardous Location Computer
See page 39
Integrated Display Computers with Keypad
See page 37
Compact Non-display Computers
See page 43
See page 45
c-UL-us certified computer for hazardous locations?
-2070 C (-4158 F) temperature rating?
Do you need:
Computer with an integrated display?
Panel mount device?
Do you need:
Yes
No
Yes
No
Computer without a display or keypad?
Optional external monitor?
Do you need:
Yes
No
Integrated display and a keypad?
Do you need:
Yes
No
Integrated Display Computers
Small form factor?SSD or HHD?Temperature rating to
55 C (131 F)?AC or DC power?
Do you need:
Yes
Non-display Computers
No
See page 40
See page 32
Industrial Monitors For complete technical specifications, certifications, and environmental specifications on the industrial computers and monitors, refer to the Industrial Computers and Monitors Specifications Technical Data, publication IC-TD001.
30 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
http://literature.rockwellautomation.com/idc/groups/literature/documents/td/IC-td001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/td/ic-td001_-en-p.pdf
-
Industrial Computers and Monitorswww.klinkmann.com6 / 2011
Typical Configurations This configuration illustrates a typical station-level HMI showing a FactoryTalk View ME or FactoryTalk View SE local network with either PanelView Plus terminals, industrial computers and monitors, and a logix controller.
Figure 6 - FactoryTalk View Station Level HMI
This configuration provides a typical site-level HMI showing a FactoryTalk View SE network with industrial computers and monitors and a logix controller.
Figure 7 - FactoryTalk View Site Level HMI
Clients(Industrial computers and monitors)
HMI Servers
Primary Data Server
Secondary Data Server
FactoryTalk Directory Server
Logix Controller
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 31
-
Industrial Computers and Monitors www.klinkmann.com6 / 2011
Integrated Display Computers
When you require a window into your operations, the integrated display computers serve as the foundation for visualization control of processes and machinery by using information displays to repair, maintain, or start a process.
This platform is available with a continuous-duty, hard-disk drive or a mission-critical, solid-state drive that is free of moving parts. A fanless design with increased temperature ratings and low-voltage processors add to the ruggedness of this computer. Plus, you can choose a standard or performance package to get just the computing power you need.
The integrated display computers provide seamless integration with the full suite of Rockwell Software solutions, including the Integrated Architecture platform and FactoryTalk View software.
Performance Models
Performance models are equipped with features designed to meet the most demanding integrated display computer needs:
Hard-disk drive or solid-state drive with DC power input option 12-, 15-, or 17-inch display options Lockable front-accessible USB 2.0 port Core Duo processor and expandable memory up to 4 GB Expansion options through a PCI slot and an accessory kit for adding PCI
express or additional PCI Two CompactFlash slots Rated to 55 C (131 F) for 12- and 15-inch displays and 50 C (122 F)
for 17-inch displays Flush panel design minimizes debris buildup
Standard Models
Standard models provide the essential features you need at the right value for most visual interface and basic information applications.
Hard-disk drive or solid-state drive with DC power input option 12-, 15-, or 17-inch display options Celeron M processor with expandable memory to 4 GB One CompactFlash slot Rated to 50 C f(122 F) for all displays
32 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
Industrial Computers and Monitorswww.klinkmann.com6 / 2011
Product Selections
0
BulletinNumber
Display Size
InputType Package Operating System Power Bezel Type
| | | | | | |
6181P- 2 = no display N = No touch S = Standard XP= Windows XP Professional forEmbedded Systems
Default = AC Default = Aluminum
HDD drive 12 = 12.1 in. T = Touch screen P = Performance D = DC SS = Stainless steel
15 = 15 in.
17 = 17 in.
Table 54 - 6181P Integrated Display Computers with Hard Disk Drives (HDD)
Cat. No. Display Size ResistiveTouch Screen Package Operating System Power Bezel
1200P Model
6181P-12NSXP
12.1-in. TFT display
Standard
Windows XP Professional for Embedded Systems
AC Aluminum
6181P-12NPXP Performance AC
6181P-12TSXP Standard AC
6181P-12TPXP Performance AC
6181P-12TPXPDC Performance DC
6181P-2PXP No display Performance Windows XP Professional for Embedded Systems
AC
6181P-2PXPDC Performance DC
1500P Model
6181P-15NSXP 15-in. TFT display Standard
Windows XP Professional for Embedded Systems
AC Aluminum
6181P-15NPXP Performance AC
6181P-15TSXP Standard AC
6181P-19TPXP Performance AC
6181P-15TPXPDC Performance DC
6181P-15TPXPSS Performance AC Stainless steel
1700P Model
6181P-17NSXP 17-in. TFT display Standard Windows XP Professional for Embedded Systems
AC Aluminum
6181P-17NPXP Performance AC
6181P-17TSXP Standard AC
6181P-17TPXP Performance AC
6181P-17TPXPDC Performance DC
6181P-17TPXPSS Performance AC Stainless steel
Table 55 - Package Features: 6181P Integrated Display Computers with HDD
Package Features Standard Performance
Processor Intel Celeron 1.06 Hz Core Duo 1.2 GHz
RAM 2 GB DDR2 (4 GB max) 4 GB DDR2 (4 GB max)
Hard disk drive 40 GB, 2.5-in. SATA HDD 40 GB, 2.5-in. SATA HDD
Optical storage DVD-RW/CD-RW
Expansion slots 1 half-length PCI (upgradable to 2 PCI or 1 PCI + 1 PCI Express)
2 half-length PCI (upgradable to1 PCI + 1 PCI Express)
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 33
-
Industrial Computers and Monitors www.klinkmann.com6 / 2011
BulletinNumber
Display Size
InputType Package Operating System Power Bezel Type
| | | | | | |
6181F-
SSD drive
12 = 12.1 in. N = No touch S = Standard XP= Windows XP Professional forEmbedded Systems
Default = AC Default = Aluminum
15 = 15 in. T = Touch screen P = Performance D = DC SS = Stainless steel
17 = 17 in.
Table 56 - 6181F Integrated Display Computers with Solid-state Drives (SDD)
Cat. No. Display Size ResistiveTouch Screen Package Operating System Power Bezel
1200P Model
6181F-12TSXP 12.1-in. TFT display Standard Windows XP Professional for Embedded Systems
AC Aluminum
6181P-12TPXP Performance AC
6181F-12TPXPDC Performance DC
6181F-12TSWE Standard Windows Embedded Standard 2009
AC Aluminum
6181F-12TPWE Performance AC
6181F-12TPWEDC Performance DC
1500 Model
6181F-15TSXP 15-in. TFT display Standard
Windows XP Professional for Embedded Systems
AC Aluminum
6181F-15TPXP Performance AC
6181F-15TPXPDC Performance DC
6181F-15TPXPSS Performance AC Stainless steel
6181F-15TSWE Standard Windows Embedded Standard 2009
AC Aluminum
6181F-15TPWE Performance AC
6181F-15TPWEDC Performance DC
6181F-15TPWESS Performance AC Stainless steel
1700P Model
6181F-17TSXP 17-in. TFT display Standard Windows XP Professional for Embedded Systems
AC Aluminum
6181F-17TPXP Performance AC
6181F-17TPXPDC Performance AC
6181F-17TPXPSS Performance AC Stainless steel
6181F-17TSWE Standard Windows Embedded Standard 2009
AC Aluminum
6181F-17TPWE Performance AC
6181F-17TPWEDC Performance DC
6181F-17TPWESS Performance AC Stainless steel
Table 57 - Package Features: 6181P Integrated Display Computers with SSD
Package Features Standard Performance
Processor Intel Celeron 1.06 Hz Core Duo 1.2 GHz
RAM 2 GB DDR2 (4 GB max) 4 GB DDR2 (4 GB max)
Storage drive 16 GB CompactFlash solid-state drive
16 GB CompactFlash solid-state drive
Optical storage DVD-RW/CD-RW
Expansion slots 2 half-length PCI (upgradable to 2 PCI or 1 PCI + 1 PCI Express)
1half-length PCI (upgradable to1 PCI + 1 PCI Express)
34 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
Industrial Computers and Monitorswww.klinkmann.com6 / 2011
Accessories
Tables 5866 list accessories for the 6181P/6181F integrated display computers.6
Table 58 - Storage Drives
Cat. No. Description For Use With
6189V-25HDD 2.5-in. hard-disk drive standard 6181P series B, C, D
6189V-25HDDST40 2.5-in. 40 GB SATA hard disk drive 6181P series E
6189V-25SSD8GB 2.5-in. IDE 8 GB solid-state drive 6181F series B, C, D
6189V-CFSSD8GB CompactFlash IDE 8 GB solid-state drive 6181P/6181F series E
6189V-CFSSD16GB CompactFlash IDE 16 GB solid-state drive 6181P/6181F series E
Table 59 - Memory Modules
Cat. No. Description For Use With
6189V-1GDDR2 1 GB DDR2 memory 6181P/F series E
6189V-2GDDR2 2 GB DDR2 memory 6181P/F series E
Table 60 - Add-in Cards and Modules
Cat. No. Description For Use With
6189V-2PCI15 PCI expansion slot kit provides 2 PCI slots 6181F-156181P-15 series B and C
6189V-2PCI15R PCI expansion slot kit provides 2 PCI slots 6181F-15 series D6181P-15 series D
6189V-COMMCARD RS-232 serial PCI communication card 6181P/F
6189V-PCIENET Ethernet PCI card, 10/100/1000 Mbps 6181P/F
6189V-PCIDVI PCI AGP/DVI video card, dual outputs 6181P/F
6189V-EXTPCIS PCI expansion slot kit 6181P/F series E (performance)
Table 61 - Power Supply
Cat. No. Description For Use With
6189V-ACPS External power supply, 100240V AC, 65 W ATX
6181P/F series E (standard)
Table 62 - Protective Screen Covers
Cat. No. Description Quantity For Use With
6189V-SCRNCOVER12 Protective screen cover 10 6181F-12, 6181P-12
6189V-SCRNCOVER15 Protective screen cover 10 6181F-15, 6181P-15
6189V-SCRNCOVER17 Protective screen cover 10 6181F-17, 6181P-17
6189V-15PCOVER 15-in. vinyl bezel cover 1 6181F-15, 6181P-15
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 35
-
Industrial Computers and Monitors www.klinkmann.com6 / 2011
Table 63 - Mounting Hardware
Cat. No. Description Quantity For Use With
6189V-MCLPS3 Mounting clips 14 6181P/6181F series E
Table 64 - Cables
Cat. No. Description For Use With
6189V-DVICBL2 Digital video cable, 2 m (6.5 ft) 6181P/F series E (performance)
6189V-DVICBL5 Digital video cable, 5 m (16.4 ft) 6181P/F series E (performance)
2711-NC13 Touch screen cable, 5 m (16.4 ft) 6181P
Table 65 - Replacement Key
Cat. No. Description For Use With
6189V-USBKEY Key for USB/power switch 6181P/F series E (performance)
Table 66 - Industrial Keyboards and Pointing Devices
Cat. No. Description Material Buttons/Keys
6189V-HPMOUSE PS/2 desktop mouse
Stainless Steel
3-button
6189V-HPMOUSEP PS/2 panel-mount mouse 3-button
6189V-KBDEPS1 PS/2 desktop keyboard/mouse 116
6189V-KBPEPS1 PS/2 panel-mount keyboard/mouse 116
6189V-KBDEPU1 PS/2 desktop keyboard/mouse Polycarbonate 84
6189V-KBDEPU1U USB desktop keyboard/mouse 84
6189V-KBDEPC1U USB desktop keyboard/mouse 116
36 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
Industrial Computers and Monitorswww.klinkmann.com6 / 2011
Integrated Display Computers with Keypad
With an integral display and keypad in the same unit, this platform can function as an operator input station or an industrial computer. The absence of external monitor cables and separate component mounting requirements makes for easy system integration. These panel-mount computers can control machinery or a process, display information necessary to repair, maintain, or start up a process; and gather basic production information for making informed business decisions:
12- or 15-inch flat panel displays with a resistive touch-screen option 36 or 44 configurable keys and alphanumeric keypad Lockable front-accessible USB port and power switch Two hot-swappable hard-disk drive bays, RAID capable Two full-length PCI, half-length PCI, and full-length ISA expansion slots Standard package or performance package equipped with higher
processing power, and RAM and a DVD-RW drive
Product Selections
Bulletin Number Display Size Input Type Package Operating System Power
| | | | | |
6180P- 12 = 12.1 in. K = Keypad S = Standard XP= Windows XP Professional Default = AC
15 = 15 in. B = Key & Touch P = Performance D = DC
Table 67 - Integrated Display Computer with Keypad
Cat. No. Display Size ResistiveTouch Screen Function
Keys Package Operating System Power
1200P Model
6180P-12KSXP 12.1-in. TFT Display 36 Standard
Windows XP Professional
AC
6180P-12KPXP 36 Performance AC
6180P-12BSXP 36 Standard AC
6180P-12BPXP 36 Performance AC
6180P-12BPXPDC 36 Performance DC
1500P Model
6180P-15KSXP 15.1-in. TFT Display 44 Standard
Windows XP Professional
AC
6180P-15KPXP 44 Performance AC
6180P-15BSXP 44 Standard AC
6180P-15BPXP 44 Performance AC
6180P-15BPXPDC 44 Performance DC
Table 68 - Package Features: Integrated Display Computer with Keypad
Package Features Standard Performance
Processor Celeron M 1.86GHz Core Duo 1.66GHz
RAM 1 GB DDR2 2 GB DDR2
Floppy disk drive 3.5 in. 3.5 in.
Hard disk drive 160 GB 160 GB
Optical storage DVD-ROM/CD-RW DVD-RW
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 37
-
Industrial Computers and Monitors www.klinkmann.com6 / 2011
Accessories
Tables 6975 list accessories for the 6180P display computers with a keypad.
Table 69 - Storage Drives
Cat. No. Description For Use With
6189V-35HDDST160 3.5-in. 160 GB SATA hard disk drive standard
6180P
6189V-SLDUAL CD-RW/DVD-RW combo drive (slim) 6180P
Table 70 - Memory Modules
Cat. No. Description For Use With
6189V-1GDDR2 1 GB DDR2 memory 6180P
6189V-2GDDR2 2 GB DDR2 memory 6180P
Table 71 - Add-in Cards and Modules
Cat. No. Description For Use With
6189V-COMMCARD RS-232 serial PCI communication card 6180P, 6180W
6189V-PCIENET Ethernet PCI card, 10/100/1000 Mbps 6180P, 6180W
6189V-PCIDVI PCI AGP/DVI video card, dual outputs 6180P, 6180W
6189V-RAIDSATA SATA RAID 0 and RAID 1 PCI card 6180P
Table 72 - Protective Screen Covers
Cat. No. Description Quantity For Use With
6189V-SCRNCOVER12 Protective screen cover 10 6180W-12, 6180P-12
6189V-SCRNCOVER15 Protective screen cover 10 6180P-15, 6180W-15
Table 73 - Cables
Cat. No. Description For Use With
2711-NC13 Touch screen cable, 5 m (16.4 ft) 6180P
Table 74 - Replacement Key
Cat. No. Description For Use With
6189V-USBKEY Key for USB/power switch 6180P
Table 75 - Industrial Keyboards and Pointing Devices
Cat. No. Description Material Buttons/Keys
6189V-HPMOUSE PS/2 desktop mouse
Stainless steel
3-button
6189V-HPMOUSEP PS/2 panel-mount mouse 3-button
6189V-KBDEPS1 PS/2 desktop keyboard/mouse 116
6189V-KBPEPS1 PS/2 panel-mount keyboard/mouse 116
6189V-KBDEPU1 PS/2 desktop keyboard/mouse Polycarbonate 84
6189V-KBDEPU1U USB desktop keyboard/mouse 84
6189V-KBDEPC1U USB desktop keyboard/mouse 116
38 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
Industrial Computers and Monitorswww.klinkmann.com6 / 2011
Hazardous Location Computers
This extreme environment computer combines intrinsic safety with market leading, extreme operating, temperature ratings. Industries from oil and gas to chemicals and mining must regularly work with potentially explosive materials, in locations where hardware often takes a beating. These computers are designed to endure the harsh extremes of heat and cold.
With Class 1 Division 2 hazardous location certification, the extreme environment computer can be safely used globally in areas where explosive materials may be present. The display version of this computer is panel mounted while the non-display version mounts on a wall. Both can withstand temperatures between -2070 C (-4158 F) inside a cabinet or enclosure. The surface temperature of the front of the display computer can withstand temperatures in the range -2055 C (-4131 F).
Product Selections
AccessoriesTables 7779 list accessories for the hazardous location computer.
Non-display VersionDisplay Version
Bulletin Number Display Size Package Operating System Input Power
| | | | |
6181X 12 = 12.1 in. P = Performance XP = Windows XP Professional for Embedded Systems DC = Standard
N = No display
Table 76 - Hazardous Location Computer
Cat. No. Display Size Processor RAM Storage DriveExpansion
Slots Operating System Power Mounting
1200XT Model
6181X-12PXPDC12.1-in. TFT display Resistive touch Sunlight readable
Core Duo U2500, 1.2GHz
2 GB (4 GB max)
8 GB CompactFlash(1)
1 half-length PCI
Windows XP Professional for Embedded Systems
DC Panel
6181X-NPXPDC No display Core Duo U2500, 1.2GHz
2 GB (4 GB max)
8 GB CompactFlash(1)
1 half-length PCI
Windows XP Professional for Embedded Systems
DC Wall
(1) Another CompactFlash Type 2 slot available.
Table 77 - Memory Modules
Cat. No. Description
6189X-4GDDR2 4 GB DDR2 memory
Table 78 - Mounting Hardware
Cat. No. Description Quantity
6189X-MCLPS Mounting clips 10
Table 79 - Storage Drives
Cat. No. Description
6189V-CFSSD16GB CompactFlash IDE 16 GB solid-state drive
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 39
-
Industrial Computers and Monitors www.klinkmann.com6 / 2011
Non-display Computers Whether applied in a control room environment or on the factory floor, the 6177R non-display computers provide the appropriate level of technology for a range of industrial applications. These non-display computers are available in various form factors, feature sets, and operating systems making it easier for you to choose the computer that best matches your industrial computing needs.
Product Selections
650R Model750R Model
1450R Model
Table 80 - Non-display Computers
Cat. No. Mounting Package Features Processor RAMHard Drive
Optical Storage
Expansion Slots Operating System Power
650R Model
6177R-M3PXP M3 Machine PerformanceCore 2 Duo
1.66GHz
1 GB 160 GBCD-RW/DVD-RW
2 half-length PCI1 full-length PCI or1 full-length ISA
Windows XP Professional AC
6177R-M3PXPDC M3 Machine Performance 1 GB 160 GB DC
6177R-M3AS3 M3 Machine Advanced 4 GB (2) 160 GB Windows Server 2003 R2 AC
750R Model
6177R-M4SXP M4 Machine Standard Celeron2.66 Ghz
1 GB 160 GBDVD-ROM/
CD-RW3 half-length PCI1 PCI Express x1
Windows XP Professional
AC
6177R-M4PXP M4 Machine PerformancePentium 4 3.0 GHz
2 GB 160 GB AC
6177R-M4AXP M4 Machine Advanced 4 GB 160 GBDVD-RW
AC
6177R-M4AS3RD M4 Machine Server 4 GB (2) 160 GB Windows Server 2003 R2(1) AC
1450R Model
6177R-R4SXP 4U Rack Standard Celeron2.66 Ghz
1 GB 160 GB
DVD-ROM/CD-RW
6 half-length PCI1 PCI Express x1
Windows XP Professional
AC
6177R-R4PXP 4U Rack Performance
Pentium 4 3.0 GHz
2 GB 160 GB 3 half-length PCI3 full-length PCI1 PCI Express x1
AC
6177R-R4LXP 4U Rack Legacy 2 GB 160 GB 3 half-length PCI2 full-length PCI2 full-length ISA1 PCI Express x1
AC
6177R-R4AS3RD 4U Rack Server 4 GB (2) 160 GB DVD-RW 6 half-length PCI1 PCI Express x1
Windows Server 2003 R2(1) AC
(1) Enabled for RAID 1 operation.
40 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
Industrial Computers and Monitorswww.klinkmann.com6 / 2011
Process and Visualization Bundles
Specific models of the 6177R computer are configured as visualization servers or workstations for the PlantPAx Process Automation System. Each computer is prepackaged with specific hardware and software components.
For more information on the PlantPAx Process Automation System, go to http://rockwellautomation.com/solutions/process.
Accessories
Tables 8287 list accessories for the 6177R non-display computers.
Table 81 - Process and Visualization Bundles
Cat. No. Description Hardware Software
7477-IS2VS100 Visualization server on industrial hardened computer. Includes a FactoryTalk View SE server license for 100 displays
Cat. no. 6177R-M3AS3650R model
FactoryTalk Administration Console FactoryTalk Directory server FactoryTalk View SE server FactoryTalk View SE client FactoryTalk View Studio FactoryTalk Alarms and Events RSLinx Enterprise RSLinx Classic RSLinx Gateway Logix5000 clock tool FactoryTalk Activation server Rockwell Automation support tool
7477-IS2VS250 Visualization server on industrial hardened computer. Includes a FactoryTalk View SE server license for 250 displays
7477-IC2VC Visualization client workstation on industrially hardened computer. Includes a FactoryTalk View SE client license.
Cat. no. 6177R-M3PXP650R model
FactoryTalk View SE client FactoryTalk Alarms and Events FactoryTalk Batch client FactoryTalk eProcedure FactoryTalk Activation client Rockwell Automation support tool
Table 82 - Storage Drives
Cat. No. Description
6189V-35HDDST160 2.5-in. 160 GB SATA hard disk drive standard
6189V-SLDUAL CD-RW/DVD-RW combo drive (slim)
Table 83 - Memory Modules
Cat. No. Description
6189V-1GDDR2 1 GB DDR2 memory
6189V-2GDDR2 2 GB DDR2 memory
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 41
http://www.rockwellautomation.com/solutions/process/http://www.rockwellautomation.com/solutions/process/
-
Industrial Computers and Monitors www.klinkmann.com6 / 2011
Table 84 - Add-in Cards and Modules
Cat. No. Description
6189V-COMMCARD RS-232 serial PCI communication card
6189V-PCIENET Ethernet PCI card, 10/100/1000 Mbps
6189V-PCIDVI PCI AGP/DVI video card, dual outputs
6189V-RAIDSATA SATA RAID 0 and RAID 1 PCI card
Table 85 - Mounting Hardware
Cat. No. Description Quantity
6189V-MCLPS2 Mounting clips 12
Table 86 - Cables
Cat. No. Description
2711-NC13 Touch screen cable, 5 m (16.4 ft)
Table 87 - Industrial Keyboards and Pointing Devices
Cat. No. Description Material Buttons/Keys
6189V-HPMOUSE PS/2 desktop mouse
Stainless Steel
3-button
6189V-HPMOUSEP PS/2 panel-mount mouse 3-button
6189V-KBDEPS1 PS/2 desktop keyboard/mouse 116
6189V-KBPEPS1 PS/2 panel-mount keyboard/mouse 116
6189V-KBDEPU1 PS/2 desktop keyboard/mouse Polycarbonate 84
6189V-KBDEPU1U USB desktop keyboard/mouse 84
6189V-KBDEPC1U USB desktop keyboard/mouse 116
42 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
Industrial Computers and Monitorswww.klinkmann.com6 / 2011
Compact Non-display Computer
These fanless computers provide an extremely durable computer option for harsh environments and require less space than most computers. Designed without cooling fans, the 6155F/6155R non-display computers come with either a mission critical solid-state drive or a continuous-duty hard-disk drive. Combine these features with the Windows Embedded Standard 2009 or Windows XP Professional operating system and you have the ideal platform for running visualization, control, or maintenance applications.
Product SelectionsBulletin Number Display Package Operating System Input Power
| | | | |
6155R HDD (hard-disk drive)
or6155F
SDD (solid-state drive)
N = No display S = Standard XP = Windows XP Professional Default = AC power
P = Performance WE = Windows Embedded Server 2009 DC = DC power
Table 88 - Compact Non-Display Computers
Cat. No. DisplayStorage Drive Expansion
Slots Package Processor RAM Operating System Power SSD HDD
200R Model - Solid State Drive (SDD)
6155F-NPXP None 16 GB None Performance
Celeron M 1 GHz
2 GBWindows XP Professional
AC
6155F-NPXPDC 16 GB None Performance 2 GB DC
6155F-NPWE 16 GB None Performance 2 GB Windows Embedded Standard 2009
AC
6155F-NPWEDC 16 GB None Performance 2 GB DC
200R Model - Hard Disk Drive (HDD)
6155R-NSXP None 40 GB None StandardCeleron M
1 GHz
1 GB
Windows XP Professional
AC
6155R-NPXP 40 GB None Performance 2 GB AC
6155R-NPXPDC 40 GB None Performance 2 GB DC
Table 89 - Package Features: Compact Non-display Computers
Package Features 6155R Standard 6155R/6155F Performance
I/O 1 serial port 1 Ethernet 10/100/1000 MBPS port 4 USB ports 1 VGA port 1 PS/2 mouse 1 PS/2 keyboard port
2 serial ports 2 Ethernet LAN port 4 USB ports 1 VGA 1 PS/2 mouse 1 PS/2 keyboard port
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 43
-
Industrial Computers and Monitors www.klinkmann.com6 / 2011
Accessories
Tables 9095 list accessories for the 6155R compact non-display computers.
Table 90 - Storage Drives
Cat. No. Description For Use With
6189V-25HDD 2.5-in. hard-disk drive standard 6155R-N
6189V-25HDDST40 2.5-in. 40 GB SATA hard-disk drive 6155R
6189V-25SSD8GB 2.5-in. IDE 8 GB solid-state drive 6155F
6189V-CFSSD8GB CompactFlash IDE 8 GB solid-state drive
6155R/6155F series E
6189V-CFSSD16GB CompactFlash IDE 16 GB solid-state drive
6155F series E
Table 91 - Memory Modules
Cat. No. Description For Use With
6189V-1GSODDR2 1 GB DDR2 SODIMM memory 6155R/6155F series E
6189V-2GSODDR2 2 GB DDR2 SODIMM memory 6155R/6155F series E
Table 92 - Add-in Cards and Modules for Legacy Non-Display Computers
Cat. No. Description For Use With
6189V-COMMCARD RS-232 serial PCI communication card 6155R-7, 6155R-14
6189V-PCIENET Ethernet PCI card, 10/100/1000 Mbps 6155R-7, 6155R-14
6189V-PCIDVI PCI AGP/DVI video card, dual outputs 6155R-7, 6155R-14
Table 93 - Cables
Cat. No. Description For Use With
2711-NC13 Touch screen cable, 5 m (16.4 ft) 6155R
Table 94 - Industrial Keyboards and Pointing Devices
Cat. No. Description Material Buttons/Keys
6189V-HPMOUSE PS/2 desktop mouse
Stainless steel
3-button
6189V-HPMOUSEP PS/2 panel-mount mouse 3-button
6189V-KBDEPS1 PS/2 desktop keyboard/mouse 116
6189V-KBPEPS1 PS/2 panel-mount keyboard/mouse 116
6189V-KBDEPU1 PS/2 desktop keyboard/mouse Polycarbonate 84
6189V-KBDEPU1U USB desktop keyboard/mouse 84
6189V-KBDEPC1U USB desktop keyboard/mouse 116
Table 95 - Replacement Battery
Cat. No. Description For Use With
6189V-BATTERY Replacement battery 6155R series E
44 Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010
-
Industrial Computers and Monitorswww.klinkmann.com6 / 2011
Industrial Monitors Whether your visualization application is on the factory floor or in a control room, the monitor portfolio provides versatile mounting configurations and interface options to choose from.
The industrial monitors deliver the latest in LCD technology for rugged industrial environments. Combine these monitors with any of the Rockwell Automation non-display computers to create a powerful visualization, maintenance, control, or information computing solution:
The performance monitors are ideal for special purpose environments such as Class 1 Division 2, and food & beverage areas, providing superior protection against heat, shock, and vibration. Combine with the 6181X hazardous location computer for a complete system solution.
The standard monitors are suited for less demanding environments but still able to maintain endurance to temperature, shock, and vibration.
Standard Monitor Selections
Bulletin Number Display Size Mounting Type(1)
(1) Panel-mount monitors have aluminum bezels. VESA mount monitors have plastic bezels.
Touch screen
| | | |
6176MStandard Monitors
15 = 15 in. P = Panel N = No touch screen
17 = 17 in. V = VESA T = Touch screen
19 = 19 in.
Table 96 - Standard Monitors
Cat. No. Display Size Mounting ResistiveTouchscreen Bezel Includes
1550M Model
6176M-15PN
15-in. TFT LCD display
Panel Aluminum
Cables and power supply
6176M-15PT Panel Aluminum
6176M-15VN VESA Plastic
6176M-15VT VESA Plastic
1750M Model
6176M-17PN
17-in. TFT LCD display
Panel Aluminum
Cables and power supply
6176M-17PT Panel Aluminum
6176M-17VN VESA Plastic
6176M-17VT VESA Plastic
1950M Model
6176M-19PN
19-in. TFT LCD display
Panel Aluminum
Cables and power supply
6176M-19PT Panel Aluminum
6176M-19VN VESA Plastic
6176M-19VT VESA Plastic
Performance Monitors
Standard Monitors
Rockwell Automation Publication VIEW-SG001F-EN-P - November 2010 45
-
Industrial Computers and Monitors www.klinkmann.com6 / 2011
Performance Monitor SelectionsBulletin Number Display Size Mounting Type Touch Screen Bezel Type
| | | | |
6186MPerformance Monitors
12 = 12.1 in. P = Panel N = No touch screen Default = Aluminum
15 = 15 in. V = VESA T = Touch screen SS = Stainless steel
17 = 17 in.
19 = 19 in.
Table 97 - Performance Monitors
Cat. No.(1)
(1) All 6186M models are suitable for hazardous location environments.
Display Size ResistiveTouchscreen Bezel Includes
1200M Model
6186M-12PN 12.1-in. TFT
top related