packers and completions equipment catalog - …/media/files/completions/catalogs/argentina...6...
Post on 01-Apr-2018
233 Views
Preview:
TRANSCRIPT
www.slb.com /packers
Packers and Completions Equipment CatalogArgentina Manufacturing Plants
Schlumberger3750 Briarpark Drive Houston, Texas, USA 77042
www.slb.com
Copyright © 2014 Schlumberger. All rights reserved.
No part of this book may be reproduced, stored in a retrievalsystem, or transcribed in any form or by any means, electronicor mechanical, including photocopying and recording, without theprior written permission of the publisher. While the informationpresented herein is believed to be accurate, it is provided “as is”without express or implied warranty.
Specifications are current at the time of printing.
13-CO-0098
An asterisk (*) is used throughout this document to denote a markof Schlumberger. Other company, product, and service names arethe properties of their respective owners.
i
Introduction ............................................................................................................................................................... 1
Mechanical PackersModel: PMDJ ........................................................................................................................................................ 2Model: PMP-2 ....................................................................................................................................................... 4Model: PJT ............................................................................................................................................................. 6Model: PJP-2 ......................................................................................................................................................... 8
Tandem Mechanical PackersModel: TM-1 ........................................................................................................................................................ 10Model: TM-2 ........................................................................................................................................................ 12Hydraulic PackersModel: RFH .......................................................................................................................................................... 14Model: PHT .......................................................................................................................................................... 16Model: PHJ .......................................................................................................................................................... 18Model: PHJ-A ...................................................................................................................................................... 20Model: PHR-2 ...................................................................................................................................................... 22
Tandem Hydraulic PackersModel: THT .......................................................................................................................................................... 24Model: THT with Hold Down. ........................................................................................................................... 26Model: THJ .......................................................................................................................................................... 28
Cup PackersModel: TC-1 ......................................................................................................................................................... 30Model: TC-2 ......................................................................................................................................................... 31Model: PCP .......................................................................................................................................................... 32Model: TCB .......................................................................................................................................................... 33
On-Off ConnectorsModel: RON-OFF ................................................................................................................................................. 34Model: OMJ ......................................................................................................................................................... 36
Sliding SleevesModel: RCMD ...................................................................................................................................................... 38Model: CSM ......................................................................................................................................................... 40Model: CSH .......................................................................................................................................................... 42
NipplesModel: RR ............................................................................................................................................................. 44Model: RF ............................................................................................................................................................. 45
Shear Out PlugsModel: SH ............................................................................................................................................................ 46Model: NRR.......................................................................................................................................................... 47
Dynamic ValvesModel: VDRC ....................................................................................................................................................... 48
Contents
Contents
ii Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
AnchorsModel: AR-1 ......................................................................................................................................................... 50Model: AR-2 ......................................................................................................................................................... 52Model: AR-3 DL ................................................................................................................................................... 54Model: AR-4 ......................................................................................................................................................... 56Model: ATC .......................................................................................................................................................... 58Model: ATN .......................................................................................................................................................... 60
Circulating SubsModel: DCH-1 ...................................................................................................................................................... 62
Rotary SubsModel: RHM ........................................................................................................................................................ 63Model: RN ............................................................................................................................................................ 64Model: RK ............................................................................................................................................................. 66
AccessoriesBlank Cover ......................................................................................................................................................... 68Entry Guide .......................................................................................................................................................... 69½ Mule Shoe ....................................................................................................................................................... 70Blank Plug ............................................................................................................................................................ 71X-Overs ................................................................................................................................................................. 72
Float ShoesModel: RZF ........................................................................................................................................................... 74
Pup PointsModel: RPJ .......................................................................................................................................................... 75
Lateral Outlet MandrelsModel: KP ............................................................................................................................................................. 76Model: MP ........................................................................................................................................................... 77
Retrievable Flow Regulator ValvesModel: FRS ........................................................................................................................................................... 78Model: FSS ........................................................................................................................................................... 80
Service ToolsModel: WRTP-1 ................................................................................................................................................... 82Model: Jet Pump ................................................................................................................................................ 84
1Introduction
Introduction
Schlumberger packers and completions manufacturing plants in Argentina feature a line of field-proven packers and packer accessories suited for noncomplex, conventional wellbore applications. This comprehensive offering complements the existing Schlumberger packer technology portfolio and includes mechanical-, wireline-, and hydraulic-set retrievable packers, permanent packers, bridge plugs, service tools, and accessories. These systems are designed to meet reservoir conditions for a wide range of well applications and environments.
When a Schlumberger packer is selected, the customer benefits from our expertise, our experience, and our commitment to advanced technologies, quality, and customer service. Field-proven packers help protect the value of assets throughout the life of the well.
Health, Safety, and the EnvironmentSchlumberger has a long-standing HSE commitment to the highest standards for the health and safety of our employees, customers, and contractors as well as to the protection of the environment in the communities in which we live and work.
HSE Management System The Schlumberger HSE Management System defines the principles by which we conduct our operations worldwide with regards to health, safety, and the environment.
Management communicates the HSE philosophy to all employees, customers, contractors, and third parties associated with our business, and each Schlumberger organization must provide positive evidence of conformance to the system.
The HSE Management System model comprises eight interrelated components:
■ commitment and leadership and accountability
■ policies and objectives ■ organization and resources ■ contractor and supplier management ■ risk management ■ business processes ■ performance monitoring and improvement ■ audits and reviews.
These are continuously improved by conformance checks
■ on day-to-day standards and procedures (controls)
■ on the management system (correction) ■ through modifications to the management
system (improvement).
2 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 10,000-psi maximum working pressure ■ Available for 5½-in casing with 2⅜ EU 8RD
and 2⅞ EU 8RD connections and for 7-in casing with 2⅞ EU 8RD connections
■ 7-in OD size with 3½ EU 8RD connection is available upon special request
■ Bypass with bonded seals ■ Can be used as semi-permanent packer ■ Emergency release system
DescriptionThe Model PMDJ packer is a mechanically set retrievable production packer featuring two sets of slips to provide a secure grip. The double “J-setting” system design enables reliable operation in environments of high differential pressures and temperatures. This packer can support both acid and frac stimulation operations and has applications in oil and gas production wells in addition to injection wells due its lack of dynamic O-rings. The packer can be set in compression, tension, or neutral.
Setting OperationUpon attaining desired depth, pull the string upward until the J-slot is cleared and rotate ½ turn clockwise (right). Apply 8,000 lbf compressive force, then pull the same tension value upward. Repeat these last two steps to ensure good isolation.
Releasing OperationApply 2,000 lbf compressive force, rotate ½ turn clockwise (right) and pull. For emergency release, pull until the emergency release pins are sheared.
Model PMDJ Production Mechanical PackerProduction Mechanical Packer: Product Number 516
Model PMDJ production mechanical packer.
3Mechanical Packers
Model PMDJ Production Mechanical Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70]
13.00–15.50 [19.34–23.06] 4.950 [125.70] 5.044 [128.10] 4.744 [120.50] 2000 [50.80] 50.945 [1,294.00] 2⅜ EU 8RD
15.50–17.00 [23.06–25.06] 4.892 [124.20] 4.950 [125.70] 4.744 [120.50] 2.000 [50.80] 50.945 [1,294.00] 2⅜ EU 8RD
17.00–23.00 [25.06–34.22] 4.670 [118.60] 4.892 [124.20] 4.637 [117.80] 2.000 [50.80] 50.945 [1,294.00] 2⅜ EU 8RD
5½ [139.70]
13.00–15.50 [19.34–23.06] 4.950 [125.70] 5.044 [128.10] 4.744 [120.50] 2.402 [61.00] 50.945 [1,294.00] 2⅞ EU 8RD
15.50–17.00 [23.06–25.06] 4.892 [124.20] 4.950 [125.70] 4.744 [120.50] 2.402 [61.00] 50.945 [1,294.00] 2⅞ EU 8RD
17.00–23.00 [25.06–34.22] 4.670 [118.60] 4.892 [124.20] 4.637 [117.80] 2.402 [61.00] 50.945 [1,294.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.456 [164.00] 6.538 [166.00] 6.267 [159.20] 2.402 [61.00] 47.638 [1,210.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.078 [154.40] 2.402 [61.00] 47.638 [1,210.00] 2⅞ EU 8RD
26.00–29.00 [38.68–43.15] 6.184 [157.10] 6.276 [159.40] 5.968 [151.60] 2.402 [61.00] 47.638 [1,210.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.456 [164.00] 6.538 [166.00] 6.267 [159.20] 2.992 [76.00] 47.638 [1,210.00] 3½ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.078 [154.40] 2.992 [76.00] 47.638 [1,210.00] 3½ EU 8RD
26.00–29.00 [38.68–43.15] 6.184 [157.10] 6.276 [159.40] 5.968 [151.60] 2.992 [76.00] 47.638 [1,210.00] 3½ EU 8RD
4 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 7,500-psi maximum working pressure ■ Available with 2⅜ EU 8RD and 3½ EU 8RD
tubing connections ■ Bypass with V-seals ■ Can remain as a production packer
or as a retrievable plug with On-Off
DescriptionThe Model PMP-2 production mechanical packer is a mechanically-set double-grip production packer. The segment mechanism in the setting system enables the mechanism not to be affected by high differential pressures and temperatures. Packer is set in compression, tension or neutral.
Setting OperationOnce at depth, rotate 5–6 turns clockwise (right), at tool´s level and while placing the tubing to reach weight, set 5,000 lbf and pull the same quantity. Set 12,000 lbf compression force and pull the same quantity to leave the packer set and packed.
Releasing OperationApply 2,000–3,000 Ibf tension on the string and rotate. When the loss of tension is perceived, wait for the pressure to equalize, then pick up to release the packer.
Model PMP-2 Production Mechanical PackerProduction Mechanical Packer: Product Number 518
Model PMP-2 production mechanical packer.
5Mechanical Packers
Model PMP-2 Production Mechanical Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5 [127.00]11.50–15.00 [17.11–22.32] 4.408 [111.90] 4.160 [115.80] 4.244 [107.80] 2.000 [50.80] 54.331 [1,380.00] 2⅜ EU 8RD
18.00 [26.78] 4.276 [108.60] 4.408 [111.90] 4.126 [104.80] 2,000 [50.80] 54.331 [1,380.00] 2⅜ EU 8RD
5½ [139.70] 13.00–17.00 [19.34–25.06] 4.892 [124.20] 5.044 [128.10] 4.744 [120.50] 2.402 [61.00] 50.866 [1,292.00] 2⅞ EU 8RD
20.00 [29.76] 4.778 [121.40] 4.892 [124.20] 4.500 [117.80] 2.402 [61.00] 50.866 [1,595.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.456 [164.00] 6.538 [166.00] 6.268 [159.20] 2.402 [61.00] 62.795 [1595.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6,276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 62.795 [1,595.00] 2⅞ EU 8RD
29.00 [43.15] 6.184 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 62.795 [1,595.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.184 [157.10] 5.811 [147.60] 2.402 [61.00] 62.795 [1,595.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.920 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 62.795 [1,595.00] 2⅞ EU 8RD
6 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 5,000-psi maximum working pressure ■ 2⅜ EU 8RD and 2⅞ EU 8RD
tubing connections ■ Simple setting operation ■ Emergency release
DescriptionThe Model PJT tension mechanical packer with “Jay” is mechanically set and is ideally suited for shallow wells. This economical packer offers simple operation and can be used in production and injection wells.
Setting operationOnce at depth, rotate ½ turn counterclockwise (left), pull the tubing to 6,000 lbf, leaving the packer set and packed.
Releasing operationRelease tension of the tubing beyond setting point, rotate ½ turn clockwise (right) and retrieve the tool. For emergency release, pull until the emergency release pins are sheared.
Model PJT Tension Mechanical PackerTension Mechanical Packer: Product Number 502
Model PJT tension mechanical packer.
7Mechanical Packers
Model PJT Tension Mechanical Packer
ØA
ØB
C
SpecificationsCasing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5 [127.00]11.50–15.00 [17.11–22.32] 4.408 [111.90] 4.160 [115.80] 4.244 [107.80] 1.929 [49.00] 30.433 [773.00] 2⅜ EU 8RD
18.00 [26.78] 4.276 [108.60] 4.408 [111.90] 4.126 [104.80] 1.929 [49.00] 30.433 [773.00] 2⅜ EU 8RD
5½ [139.70]13.00–15.50 [19.34–23.06] 4.949 [125.70] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 35.315 [897.00] 2⅜ EU 8RD
15.50–20.00 [23.06–29.76] 4.780 [121.40] 4.949 [125.70] 4.638 [117.80] 2.000 [50.80] 35.315 [897.00] 2⅜ EU 8RD
5½ [139.70]13.00–15.50 [19.34–23.06] 4.949 [125.70] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 36.693 [932.00] 2⅞ EU 8RD
15.50–20.00 [23.06–29.76] 4.780 [121.40] 4.949 [125.70] 4.638 [117.80] 2.402 [61.00] 36.693 [932.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 41.260 [1,048.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70 ] 6.079 [154.40] 2.402 [61.00] 41.260 [1,048.00] 2⅞ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 41.260 [1,048.00] 2⅞ EU 8RD
32.00–35.00 [47.61–52.07] 6.004 [152.50] 6.094 [154.80] 5.811 [147.60] 2.402 [61.00] 41.260 [1,048.00] 2⅞ EU 8RD
9⅝ [244.48] 29.30–36.00 [43.59–53.57] 8.921 [226.60] 9.001 [228.60] 8.590 [218.30] 4.000 [101.60] 54.170 [1,376.00] 4½ EU 8RD
8 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 8,000-psi maximum working pressure ■ 2⅞ EU 8RD and 3½ EU 8RD
tubing connections ■ Double-mechanical and hydraulic anchoring ■ Protective sleeve for hydraulic hold-downs
DescriptionThe Model PJP-2 mechanical packer is a mechanically-set, retrievable production packer with double-grip anchoring for well testing. The “Jay” setting mechanism allows for simple operation. The packer is specifically designed for fracs and squeeze cementing jobs.
Setting OperationOnce at depth, pull 2 in to remove the J-pin and rotate ½ turn clockwise (right). Apply weight according to procedure.
Releasing OperationPull the string up to 2,000 lbf over its weight, wait for the elastomers to stop packing. Once the packer is unset, begin retrieval.
Model PJP-2 Mechanical PackerMechanical Packer with Hold-Down: Product Number 526
Model PJP-2 mechanical packer with hold-down..
9Mechanical Packers
Model PJP-2 Mechanical Packer
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
7⅝ [193.67]
20.00–24.00 [29.76–35.71] – – 6.811 [173.00] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
24.00–29.70 [35.71–44.19] 6.875 [174.60] 7.025 [178.40] 6.673 [169.50[ 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
33.70–39.00 [50.14–58.03] 6.625 [168.30] 6.765 [171.80] 6.496 [165.00] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
8⅛ [206.37] – – – 7.311 [185.70] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
8⅝ [219.08]
20.00–28.00 [29.76–41.66] 8.017 [203.60] – 7.780 [197.60] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
32.00–40.00 [47.61–59.51] 7.725 [196.20] 7.921 [201.20] 7.531 [191.30] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
40.00–49.00 [59.51–72.91] 7.511 [190.80] 7.725 [196.20] 7.311 [185.70] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
ØA
ØB
C
10 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 5,000-psi maximum working pressure ■ 2⅜ EU 8RD and 2⅞ tubing EU 8RD
tubing connections ■ Low maintenance cost
DescriptionThe Model TM-1 mechanical packer allows for isolation of several zones using a single anchor at the bottom, by means of a hydraulic or mechanical packer. The Model TM-1 is highly effective and very robust and can be used in either injection wells or wells in production.
Setting OperationBefore running this tool, set the shearing pins rate and the correct position of the pin in the J-slot. After anchoring a packer at the lowest part of the string, pull the tandem according to the operational procedure.
Unsetting OperationRelease tension, set 500 lbf compressive force, then rotate from 1 to 3 turns clockwise (right) (at tool level). Retrieve the tool.
Model TM-1 Tandem Mechanical PackerTandem Mechanical Packer: Product Number 519
Model TM-1 tandem mechanical packer..
11Mechanical Packers
Model TM-1 Tandem Mechanical Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70]
13.00–17.00 [19.34 –25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 22.205 [564.00] 2⅜ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 22.205 [564.00] 2⅜ EU 8RD
23.00 [34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] 2.000 [50.80] 22.205 [564.00] 2⅜ EU 8RD
5½ [139.70]
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 22.205 [564.00] 2⅞ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 22.205 [564.00] 2⅞ EU 8RD
23.00 [34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] 2.000 [50.80] 22.205 [564.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 22.913 [582.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 22.913 [582.00] 2⅞ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 22.913 [582.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 22.913 [582.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 22.913 [582.00] 2⅞ EU 8RD
12 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 5,000-psi maximum working pressure ■ 2⅜ EU 8RD and 2⅞ tubing EU 8RD
tubing connections ■ Large packing surface ■ 5½-in × 61-mm wide passage
option available upon special request
DescriptionThe Model TM-2 tandem mechanical packer enables isolation of several zones utilizing its larger packing surfaces. The installation requires that it be run with a hydraulic or mechanical packer at the lowest part of the string, offering the necessary anchor to the system. This highly effective and robust packer can be used in injection wells as in production ones.
Setting OperationBefore running the packer, set the shearing pins rate and the position of the pin in the J-slot. Then, pull according to procedure having the lowest packer set as an anchor for the system.
Unsetting OperationRelease tension, apply 500-lbf compressive force and rotate from 1 to 3 turns clockwise (right) (at tool level) to retrieve the tool.
Model TM-2 Tandem Mechanical PackerTandem Mechanical Packer: Product Number 521
Model TM-2 tandem mechanical packer.
13Hydraulic Packers
Model TM-2 Tandem Mechanical Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70]
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 29.764 [756.00] 2⅜ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 29.764 [756.00] 2⅜ EU 8RD
23.00 [34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] 2.000 [50.80] 29.764 [756.00] 2⅜ EU 8RD
5½ [139.70]
13.00–17.00 [19.345–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 29.764 [756.00] 2⅞ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 29.764 [756.00] 2⅞ EU 8RD
23.00 [34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] 2.000 [50.80] 29.764 [756.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 30.402 [772.20] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 30.402 [772.20] 2⅞ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 30.402 [772.20] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 30.402 [772.20] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 30.402 [772.20] 2⅞ EU 8RD
14 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 7,500-psi maximum working pressure
at the bypass when released ■ 2⅜ EU 8RD and 2⅞ EU 8RD
tubing connections ■ Can remain as a production packer
or as a retrievable plug with On-Off ■ Upper hydraulic hold-downs ■ Release-by-rotation available
at special request
DescriptionThe Model RFH hydraulic packer is a hydraulically-set hydrostatic packer with double grip, featuring slips in the lower section and hold downs in the upper one. The packer can be retrieved by tension. The Model RFH is useful for oil and gas production wells as well as for injection ones. The tubing can remain with tension, neutral, or weight and can be moved selectively.
Setting OperationSelect the rated value of the shearing pins, with the purpose of setting the installation selectively or as a whole in the case of using multiple packers. Run the packer (with the predetermined string) with a blank plug or another element for that purpose (according to installation) to allow pressurization. At the required depth, apply pressure according to the rated values of the setting pins. Check the mechanical specifications for correct operational parameters for weight and tension.
Releasing OperationSet the string at neutral point and apply tension exceeding the tubing weight, according to the rate of the shearing ring for this operation.
Model RFH Hydraulic PackerHydraulic Packer: Product Number 500
Model RFH hydraulic packer.
15Hydraulic Packers
Model RFH Hydraulic Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5 [127.00]15.00–18.00 [22.32–26.78] 4.276 [108.60] 4.408 [112.00] 4.125 [104.80] 1.978 [50.20] 65.81 [1,671.60] 2⅜ EU 8RD
11.50–15.00 [17.11–22.32] 4.408 [112.00] 4.560 [115.80] 4.250 [107.90] 1.978 [50.20] 65.81 [1,671.60] 2⅜ EU 8RD
5½ [139.70]
13.00–15.50 [19.34–23.06 ] 4.949 [125.70] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 75.472 [1,917.00] 2⅜ EU 8RD
15.50–20.00 [23.06–29.76] 4.780 [121.40] 4.949 [125.70] 4.638 [117.80] 2.000 [50.80] 75.472 [1,917.00] 2⅜ EU 8RD
20.00–23.00 [29.76–34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] 2.000 [50.80] 75.472 [1,917.00] 2⅜ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.73] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 79.409 [2,017.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 79.409 [2,017.00] 2⅞ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.4 0] 5.969 [151.60] 2.402 [61.00] 79.409 [2,017.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.968 [147.60] 2.402 [61.00] 79.409 [2,017.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 79.409 [2,017.00] 2⅞ EU 8RD
9⅝ [244.48]
40.00–47.00 [59.51–69.93] 8.941 [226.59] 9.001 [228.63] 8.593 [218.30] 2.990 [76.00] 97.75 [2,482.80] 3½ EU 8RD
40.00–47.00 [59.51–69.93] 8.681 [220.50] 8.835 [224.41] 8.437 [214.30] 2.990 [76.00] 97.75 [2,482.80] 3½ EU 8RD
47.00–53.50 [69.93–79.60] 8.681 [220.50] 8.835 [224.41] 8.437 [214.30] 2.990 [76.00] 97.75 [2,482.80] 3½ EU 8RD
47.00–53.50 [69.93–79.60] 8.535 [216.79] 8.835 [224.41] 8.218 [208.70] 2.990 [76.00] 97.75 [2,482.80] 3½ EU 8RD
16 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 7,500-psi maximum working
differential pressure ■ Hydraulically set and packed ■ Double mechanical grip ■ Double isolator element for a larger
packing area ■ Low maintenance cost ■ Releasing system by tension ■ 5½-in × 61-mm wide passage
option available upon special request
DescriptionThe Model PHT hydraulic packer features double mechanical grip and is hydraulically set, but is retrieved by tension. This economical and compact packer is designed for all type of installations. After being set, the tubing can remain with weight, neutral, or in tension. These features ease the packer’s operation.
Setting OperationPrior to running the packer, rate the shearing value of the calibrated pins, with the purpose of setting the installation selectively or as a whole, should multiple packers be required. Run the packer (with the predetermined string) with a blank plug or another element for that purpose (according to installation) to allow pressurization. Upon reaching the required depth, apply pressure according to the shearing values of the setting pins. Check the correct operation with weight and tension.
Releasing OperationSet the string at the neutral point and apply tension over the tubing weight, according to the rate of the shearing ring for this operation.
Model PHT Hydraulic PackerHydraulic Packer Released by Tension: Product Number 514
Model PHT hydraulic packer released by tension.
17Hydraulic Packers
Model PHT Hydraulic Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5 [127.00]11.50–15.00 [17.11–22.32] 4.406 [111.90] 4.559 [115.80] 4.244 [107.80] 2.000 [50.80] 50.630 [1,286.00] 2⅜ EU 8RD
18.00 [26.78] 4.276 [108.60] 4.406 [111.90] 4.126 [104.80] 2.000 [50.80] 50.630 [1,286.00] 2⅜ EU 8RD
5½ [139.70]13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 49.803 [1,265.00] 2⅜ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 49.803 [1,265.00] 2⅜ EU 8RD
5½ [139.70]13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 49.803 [1,265.00] 2⅞ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 49.803 [1,265.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 61.417 [1,560.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 61.417 [1,560.00] 2⅞ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 61.417 [1,560.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 61.417 [1,560.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 61.417 [1,560.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.992 [76.00] 61.417 [1,560.00] 3½ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.992 [76.00] 61.417 [1,560.00] 3½ EU 8RD
29.00 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.992 [76.00] 61.417 [1,560.00] 3½ EU 8RD
32.00 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.992 [76.00] 61.417 [1,560.00] 3½ EU 8RD
35.00–40.00 [52.07–59.51] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.992 [76.00] 61.417 [1,560.00] 3½ EU 8RD
18 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 6,000-psi maximum working differential
pressure in 5½-in casing ■ Hydraulically set and packed ■ Telescopic mandrel (split mandrel, J-lock) ■ Double mechanical grip ■ Double-isolator element for a larger
packing area ■ Straight pull or rotational release ■ Low maintenance cost
DescriptionThe Model PHJ hydraulic packer is a double mechanical grip packer that is hydraulically set and recovered by tension and rotation. Due to its design with telescopic mandrel, it can be used in many types of installations, especially selective ones, so when retrieving the whole system there is not any tension stack. After being set, the packer can be set in compression, tension, or neutral. These advantages allow ease of operation.
Setting OperationRate the shearing value of the calibrated pins, with the purpose of setting the installation selectively or as a whole in the case of using multiple packers. Lower the Model PHJ packer with the predetermined string, with a blank plug or another element for that purpose, according to installation, to allow pressurization. At the required depth, apply pressure according to the shearing values of the setting pins. After this, repack it with 2,800 psi (see table).
Releasing OperationSet the string to the neutral point, rotate ¼ turn clockwise (right) and lift approximately 30 cm to lock the pin in the “Jay” in the unset position.
Model PHJ Hydraulic PackerHydraulic Packer: Product Number 529
Model PHJ hydraulic packer.
19Hydraulic Packers
Model PHJ Hydraulic Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70]13.00–17.00 [19.34–25.063] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 59.055 [1,500.00] 2⅜ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 59.055 [1,500.00] 2⅜ EU 8RD
20 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES. ■ 4,000-psi maximum working differential
pressure in 5½-in casing and 8,500-psi in 7-in casing
■ Can be set in compression, tension, or neutral
■ Can be retrieved by rotating and pulling the string
■ Hydraulically set and packed ■ Telescopic mandrel (split mandrel
with J-lock) ■ Double mechanical grip ■ Double packing elements ■ Release system by pulling or rotating ■ Low maintenance cost
DescriptionThis Model PHJ-A hydraulic packer, utilizing double mechanical grip and hydraulic setting, can be retrieved either by pulling or rotating the string. The Model PHJ-A packer can be used in all types of installations, but is primarily used in selective water injection wells where many zones require isolation. The two-piece telescoping mandrel allows adequate clearance to collapse the slips and elements before loading the packer immediately below it. When it is necessary to retrieve many packers in the same string, a tension stack is avoided. The Model PHJ-A packer can be set in compression, tension, or neutral.
Setting Procedure.Previously, you must select the shearing pins rate, in order to set the packers in a selective way or altogether in just one single operation. Run the Model PHJ-A packer in a predetermined string with a plug at the bottom, so that it can be pressurized. Upon reaching the required setting depth, pressurize the string according to the shearing rate, then pack it with 2,800 psi.
Release Procedure.Determine where the neutral point of the string is, rotate ¼ turn clockwise (right) and lift approximately 30 cm, in order to lock the J-slot pin in the safe position.
Model PHJ-A Hydraulic PackerHydraulic Packer: Product Number 536
Model PHJ-A hydraulic packer.
21Hydraulic Packers
Model PHJ-A Hydraulic Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70]13.00–17.00 [19.34–25.06] 4.890 [121.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 61.575 [1,564.00] 2⅞ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 61.575 [1,564.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.264 [159.10] 2.402 [61.00] 65.551 [1,665.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 65.551 [1,665.00] 2⅞ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 65.551 [1,665.00] 2⅞ EU 8RD
32.00 [47.62] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 65.551 [1,665.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.654 [143.60] 2.402 [61.00] 65.551 [1,665.00] 2⅞ EU 8RD
22 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 7,500-psi maximum working
differential pressure ■ Double packing element ■ Hydraulically set and packed ■ Rotation release ■ Low maintenance cost
DescriptionThe Model PHR-2 hydraulic packer is a compact, cost-effective, hydraulically-set, rotation-release packer that is designed for many types of installations. After being set, it can remain with weight, neutral or tension, which makes the tubing movement easier. These features make the tool easy to operate.
Setting OperationRate the shearing value of the calibrated pins, with the purpose of setting the installation selectively or as a whole in the case of using multiple packers. Lower the PHR-2 hydraulic packer with the predetermined string, with a blank plug or another element for that purpose (according to installation) to allow pressurization. Get to the required depth and apply pressure according to the shearing values of the setting pins.
Releasing OperationSet the tubing to neutral point, pull with ±2,000 lbf and rotate the string from 5 to 6 turns clockwise (right). The tool releases once tension is removed.
Model PHR-2 Hydraulic PackerHydraulic Packer Released by Rotation: Product Number 517
Model PHR-2 hydraulic packer released by rotation.
23Hydraulic Packers
Model PHR-2 Hydraulic Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5 [127.00]11.50–15.00 [17.11–22.32] 4.406 [111.90] 4.559 [115.80] 4.244 [107.80] 2.000 [50.80] 50.059 [1,271.50] 2⅜ EU 8RD
18.00 [26.78] 4.276 [108.60] 4.406 [111.90] 4.126 [104.80] 2.000 [50.80] 50.059 [1,271.50] 2⅜ EU 8RD
5½ [139.70] 13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 53.071 [1,348.00] 2⅜ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 53.071 [1,348.00] 2⅜ EU 8RD
5½ [139.70]13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 51.929 [1,319.00] 2⅞ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 51.929 [1,319.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 56.260 [1,429.00] 2⅞ EU 8RD
23.00–26.00 [34.22 - 38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 56.260 [1,429.00] 2⅞ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 56.260 [1,429.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 56.260 [1,429.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 56.260 [1,429.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.992 [76.00] 54.685 [1,389.00] 3½ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.992 [76.00] 54.685 [1,389.00] 3½ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.992 [76.00] 54.685 [1,389.00] 3½ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.992 [76.00] 54.685 [1,389.00] 3½ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.66 [143.70] 2.992 [76.00] 54.685 [1,389.00] 3½ EU 8RD
24 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ Double packing element for larger seal area ■ Hydraulically set and packed ■ Straight-pull release ■ Circulation bypass when releasing ■ No extra forces when releasing ■ Low maintenance cost ■ 5½-in × 61-mm wide passage
option available upon special request
DescriptionThe Model THT tandem hydraulic packer is a compact, cost-effective packer featuring hydraulic setting and straight-pull release. Designed for selective installations and after being set, can remain with weight, neutral or tension allowing easier tubing movement. These advantages make the Model THT tandem packer easy to operate.
Setting OperationRate the shearing value of the calibrated pins, with the purpose of setting the installation selectively or as a whole in the case of using multiple packers. Lower the Model THT with the predetermined string and a double grip packer with a blank plug to pressurize it. Get to the required depth and apply pressure according to the shearing values of the setting pins.
Releasing OperationTo release the packer, pull the string to shear the pins on the packer.
Model THT Tandem Hydraulic PackerTandem Hydraulic Packer: Product Number 504
Model THT tandem hydraulic packer.
25Hydraulic Packers
Model THT Tandem Hydraulic Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70]13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 21.339 [542.00] 2⅜ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 21.339 [542.00] 2⅜ EU 8RD
5½ [139.70]13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 37.126 [943.00] 2⅞ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 37.126 [943.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.992 [76.00] 39.213 [996.00] 3½ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.992 [76.00] 39.213 [996.00] 3½ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2,992 [76.00] 39.213 [996.00] 3½ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.992 [76.00] 39.213 [996.00] 3½ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.992 [76.00] 39.213 [996.00] 3½ EU 8RD
26 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ Double packing element (larger seal area) ■ Hydraulically set and packed ■ Upper hold downs to compensate for any
differential pressure from below, allowing the packer to stand upward forces in the annulus
■ Circulation bypass when releasing ■ Straight pull release ■ No extra forces when releasing,
due to its parted mandrel ■ Low maintenance cost ■ 61-mm wide passage option available
upon special request ■ Optional elastomeric or
non-elastomeric seals
DescriptionThe Model THT tandem hydraulic packer features compact design, cost-effective operation, hydraulic setting, and straight-pull release. Designed for selective installations, the Model THT can remain set with weight, neutral, or tension, making the tubing movement easier. The Model THT packer is easy to operate.
Setting OperationRate the shearing value of the calibrated pins, with the purpose of setting the installation selectively or as a whole (in instances requiring multiple packers). Lower the THT with the predetermined string and a double grip packer with a blank plug to pressurize it. Get to the required depth and apply pressure according to the shearing values of the setting pins (see table).
Releasing OperationPull the string over the shearing force of the rated pins (plus the string weight). Repeat the procedure for any additional packers.
Model THT Tandem Hydraulic PackerTandem Hydraulic Packer with Hold-Down: Product Number 507
Model THT tandem hydraulic packer with hold-down.
27Hydraulic Packers
Model THT Tandem Hydraulic Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max. , in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70]13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 21.339 [542.00] 2⅜ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 21.339 [542.00] 2⅜ EU 8RD
5½ [139.70]13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 37.126 [943.00] 2⅞ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 37.126 [943.00] 2⅞ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
28 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 6,000-psi maximum working differential
pressure in 5½-in casing ■ Hydraulically set and packed ■ Telescopic mandrel (split mandrel, J-lock) ■ Double-mechanical grip ■ Double-isolator element
(larger packing area) ■ Straight pull-and-rotate release (J-lock) ■ Low maintenance cost
DescriptionThe Model THJ tandem hydraulic packer is hydraulically set, allows straight pull-and-rotate release, and is designed for selective installations. The telescopic mandrel helps avoid extra tension forces while retrieving. The packer can be set in compression, tension, or neutral. This make this packer an excellent option.
Setting OperationRate the shearing value of the calibrated pins, with the purpose of setting the installation selectively or as a whole in the case of using multiple packers. Lower the Model THJ packer with the predetermined string, with a blank plug or other element for that purpose to allow pressurization, according to installation. At the required depth, apply pressure according to the shearing values of the setting pins. After setting, repack with 2,800 psi (see table).
Releasing OperationSet the string to the neutral point, rotate ¼ turn clockwise (right) and lift approximately 30 cm to lock the pin in the ”Jay” in the unset position.
Model THJ Tandem Hydraulic PackerTandem Hydraulic Packer: Product Number 533
Model THJ tandem hydraulic packer.
29Cup Packers
Model THJ Tandem Hydraulic Packer
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70]13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 50.629 [1,286.00] 2⅜ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.500 [114.30] 2.000 [50.80] 50.629 [1,286.00] 2⅜ EU 8RD
5½ [139.70]13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 50.629 [1,286.00] 2⅞ EU 8RD
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.500 [114.30] 2.402 [61.00] 50.629 [1,286.00] 2⅞ EU 8RD
30 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 5,000-psi maximum working pressure ■ 2⅜ EU 8RD, 2⅞ EU 8RD, and 3½ EU 8RD
tubing connections ■ Packing direction of the cup can be inverted ■ String operation not required for packing
or retrieval of the installation ■ Low maintenance cost
DescriptionThe Model TC-1 cup packer is a tandem packer used in selective installations for injection wells. The cup is specifically designed to avoid pulling on the tubing joints. The packer enables running the required amount of packers, depending upon the zones to be injected.
Model TC-1 Cup PackerProduct Number 510
Model TC-1 cup packers.
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Packer OD, in [mm]
Connection
5½ [139.70]
13.00–15.50 [19.34–23.06]
4.949 [125.70]
5.043 [128.10]
5.091 [129.30]
2.008 [51.00]
18.110 [460.00]
4.685 [119.00] 2⅜ EU 8RD
15.50–17.00 [23.06–25.06]
4.890 [124.20]
4.949 [125.70]
5.024 [127.60]
2.008 [51.00]
18.110 [460.00]
4.685 [119.00] 2⅜ EU 8RD
7 [177.80]
17.00–23.00 [25.29–34.22]
6.366 [161.70]
6.535 [166.00]
6.520 [165.60]
2.008 [51.00
18.110 [460.00]
5.969 [151.60] 2⅜ EU 8RD
26.00–29.00 [38.68–43.15]
6.185 [157.10]
6.276 [159.40]
6.315 [160.40]
2.008 [51.00]
18.110 [460.00]
5.969 [151.60] 2⅜ EU 8RD
5½ [139.70]
13.00–15.50 [19.34–23.06]
4.949 [125.70]
5.043 [128.10]
5.091 [129.30]
2.402 [61.00]
18.110 [460.00]
4.685 [119.00] 2⅞EU 8RD
15.50–17.00 [23.06–25.06]
4.890 [124.20]
4.949 [125.70]
5.024 [127.60]
2.402 [61.00]
18.110 [460.00]
4.685 [119.00] 2⅞EU 8RD
7 [177.80]
17.00 –23.00 [25.29–34.22]
6.366 [161.70]
6.535 [166.00]
6.520 [165.60]
2.402 [61.00]
18.110 [460.00]
5.969 [151.60] 2⅞EU 8RD
26.00–29.00 [38.68 –43.15]
6.185 [157.10]
6.276 [159.40]
6.315 [160.40]
2.402 [61.00]
18.110 [460.00]
5.969 [151.60] 2⅞EU 8RD
7 [177.80]
17.00–23.00 [25.29–34.22]
6.366 [161.70]
6.535[166.00]
6.520 [165.60]
2.992 [76.00]
20.669 [525.00]
5.969 [151.60] 3½ EU 8RD
26.00–29.00 [38.68 –43.15]
6.185 [157.10]
6.276[159.40]
6.315 [160.40]
2.992 [76.00]
20.669 [525.00]
5.969 [151.60] 3½ EU 8RD
ØA
ØB
C
ØD
31Cup Packers
MAIN FEATURES ■ 5,000 psi maximum working pressure ■ Double direction packing isolation ■ 2⅜-in, 2⅞-in, and 3½-in EU 8RD
tubing connections ■ Low maintenance cost ■ No need to operate the string for packing
or retrieving the installation
DescriptionTC-2: tandem packer (double cup) used for selective installations in injection wells. This design isolates in both directions. As in the TC-1, the cups are especially designed to avoid pulling on the casing tubing joints. There is no restriction as per the number of packers to be used, depending on the design required by the injection string.
Model TC-2 Cup PackerCup Packer: Product Number 512
ØA
ØB
C
ØD
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Packer OD, in [mm]
Connection
5½ [139.70]
13.00–15.50 [19.34–23.06]
4.949 [125.70]
5.043 [128.10]
5.091 [129.30]
2.008 [51.00]
18.110 [460.00]
4.685 [119.00] 2⅜ EU 8RD
15.50–17.00 [23.06–25.06]
4.890 [124.20]
4.949 [125.70]
5.024 [127.60]
2.008 [51.00]
18.110 [460.00]
4.685 [119.00] 2⅜ EU 8RD
7 [177.80]
17.00–23.00 [25.29–34.22]
6.366 [161.70]
6.535 [166.00]
6.520 [165.60]
2.008 [51.00]
18.110 [460.00]
5.969 [151.60] 2⅜ EU 8RD
26.00–29.00 [38.68–43.15]
6.185 [157.10]
6.276 [159.40]
6.315 [160.40]
2.008 [51.00]
18.110 [460.00]
5.969 [151.60] 2⅜ EU 8RD
5½ [139.70]
13.00–15.50 [19.34–23.06]
4.949 [125.70]
5.043 [128.10]
5.091 [129.30]
2.402 [61.00]
18.110 [460.00]
4.685 [119.00] 2⅞ EU 8RD
15.50–17.00 [23.06–25.06]
4.890 [124.20]
4.949 [125.70]
5.024 [127.60]
2.402 [61.00]
18.110 [460.00]
4.685 [119.00] 2⅞ EU 8RD
7 [177.80]
17.00–23.00 [25.29–34.22]
6.366 [161.70]
6.535 [166.00]
6.520 [165.60]
2.402 [61.00]
18.110 [460.00]
5.969 [151.60] 2⅞ EU 8RD
26.00–29.00 [38.68–43.15]
6.185 [157.10]
6.276 [159.40]
6.315 [160.40]
2.402 [61.00]
18.110 [460.00]
5.969 [151.60] 2⅞ EU 8RD
7 [177.80]
17.00–23.00 [25.29–34.22]
6.366 [161.70]
6.535 [166.00]
6.520 [165.60]
2.992 [76.00]
20.669 [525.00]
5.969 [151.60] 3½ EU 8RD
26.00–29.00 [38.68–43.15]
6.185 [157.10]
6.276 [159.40]
6.315 [160.40]
2.992 [76.00]
20.669 [525.00]
5.969 [151.60] 3½ EU 8RD
Model TC-2 cup packer.
32 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 5,000-psi maximum working pressure ■ 2⅜ EU 8RD, 2⅞ EU 8RD and 3½ EU 8RD
tubing connections ■ Simple setting operation
DescriptionThe Model PCP automatic “J” cup packer is Mechanical set weight packer with automatic “Jay” especially designed for use with flexible tubing (coiled tubing) in production tests. Cost-effective and easy to operate.
Operation ModeUtilizing the automatic “Jay”, the Model PCP is operated with reciprocal movements both when setting the packer and when releasing it.
Model PCP Automatic “J” Cup PackerAutomatic “J” Cup Packer: Product Number 524
PCP automatic “J” cup packer.
TC-2 Cup Packers Specifications (Product Number 512)
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Packer OD, in [mm]
Connection
5½ [139.70]
13.00–15.50 [19.34–23.06]
4.949 [125.70]
5.043 [128.10]
5.091 [129.30]
2.008 [51.00]
33.740 [857.00]
4.567 [116.00]
2⅜ EUE
15.50–17.00 [23.06–25.06]
4.890 [124.20]
4.949 [125.70]
5.024 [127.60]
2.008 [51.00]
33.740 [857.00]
4.567 [116.00]
2⅜ EUE
ØA
ØB
C
ØD
33Cup Packers
MAIN FEATURES ■ 5,000-psi maximum working pressure ■ 2⅜ EUE 8RD, 2⅞ EUE 8RD, and
3½ EUE 8RD tubing connections ■ Packing direction of the cup can be inverted ■ Low maintenance cost ■ No string operation required for packing
or retrieving the installation ■ Connections for the injection control line
of chemicals
DescriptionThe Model TCB cup packer is a tandem packer used in selective injection-well installations. The cup is especially designed to avoid pulling on the tubing joints. The packer enables the running of the required amount of packers, depending on the zones to be injected. The tool has connections for the injection control line of chemicals.
Model TCB Cup Packer with By-PassCup Packer with By-Pass: Product Number 527
TCB cup packerwith by-pass.
ØA
ØB
C
ØD
TCB Cup Packers with By-Pass Specifications (Product Number 527)
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Packer OD, in [mm]
Connection
5½ [139.70]
13.00–15.50 [19.34–23.06]
4.949 [125.70]
5.043 [128.10]
5.091 [129.30]
2.402 [61.00]
19.291 [490.00]
4.764 [121.00]
2⅞ EUE
15.50–17.00 [23 06–25.06]
4.890 [124.20]
4.949 [125.70]
5.024 [127.60]
2.402 [61.00]
19.291 [490.00]
4.764 [121.00]
2⅞ EUE
7 [177.80]
17.00–23.00 [25.29–34.22]
6.366 [161.70]
6.535 [166.00]
6.520 [165.60]
2.992 [76.00]
22.697 [576.50]
5.969 [151.60]
3½ EUE
26.00–29.00 [38.68–43.15]
6.185 [157.10]
6.276 [159.40]
6.315 [160.40]
2.992 [76.00]
22.697 [576.50]
5.969 [151.60]
3½ EUE
34 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 7,500-psi working pressure ■ 2⅜ EU 8RD and 2⅞ tubing EU 8RD
tubing connections ■ Cut profile according to customer need ■ Low maintenance cost
DescriptionThe Model RON-OFF On-Off connector, utilizing a “J” system enable disconnections and reconnections of the tubing without adversely affecting the installation’s performance. The connector is ideal when multiple connects and disconnects are necessary during an operation.
Operation ModeOnce the packer is anchored at depth, apply 500-lbf compressive force and rotate ½ turn counterclockwise (left) at tool depth; disconnect and lift the string. To connect, run the connector sleeve to the fishing point (connector pin) and apply 1,000-lbf compressive force.
Model RON-OFF On-Off ConnectorOn-Off Connector: Product Number 600
Model RON-OFF on-off connector.
35On-Off Connectors
Model RON-OFF Connector
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
4½ [114.30] N/A 3.921 [99.60] 4.091 [103.90] 3.740 [95.00] 2.000 [50.80] 33.661 [855.00] 2⅜ EU 8RD
5 [127.00] N/A 4.276 [108.60 ] 4.559 [115.80] 4.000 [101.60] 2.000 [50.80] 33.661 [855.00] 2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.504 [114.40] 2.000 [50.80] 33.661 [855.00] 2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.606 [117.00] 2.402 [61.00] 37.795 [960.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.402 [61.00] 37.795 [960.00] 2⅞ EU 8RD
36 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 10,000-psi working pressure ■ 150,000-lbf maximum operation tension ■ Operation by reciprocal movements ■ Cut profile according to customer need ■ 50.8-mm and 61-mm inner passage ■ Low maintenance cost
DescriptionThe Model OMJ automatic On-Off connector is specifically designed to be run in strings with multiple packers when setting by rotation is not an option. Highly suited for deviated wells, the packer is simple to operated, cost effective and dependable.
Operation ModeOnce in depth and with a packer set, apply compressive force (as programmed) to shear the safety pins. When the string is lifted, the Model OMJ will disconnect. To reconnect, set 2,000-lbf compressive force and so on. With three additional movements, the complete rotation of the system is finished.
Model OMJ Automatic On-Off ConnectorOn-Off Connector: Product Number 616
Model OMJ automatic on-off connector.
37On-Off Connectors
Model OMJ Automatic On-Off Connector
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.500 [114.30] 2.008 [51.00] 40.748 [1,035.00] 2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.567 [116.00] 2.402 [61.00] 41.614 [1,057.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.402 [61.00] 41.614 [1,057.00] 2⅞ EU 8RD
38 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 10,000-psi maximum working pressure ■ 2⅜ EU 8RD and 2⅞ EU 8RD
tubing connections ■ Easy opening and closing operation ■ Low maintenance cost ■ Optional R, F, or X profiles ■ Optional elastomeric or
non-elastomeric seals ■ Optional premium threads
DescriptionThe Model RCMD sliding sleeve allows communication in between the tubing and the annular space to selectively circulate or produce the zones.
Operation ModeTo open the sleeve, run a B-type shifting tool and jar downwards till the sleeve is shifted. To close the sleeve, run a B-type shifting tool through the tool and jar upwards till the sleeve is shifted.
Model RCMD Sliding SleeveSliding Sleeve: Product Number 656
Model RCMD sliding sleeve.
39Sliding Sleeves
Model RCMD Sliding Sleeve
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5 [127.00] N/A 4.276 [108.60] 4.559 [115.80] 3.079 [78.20] 1.874 [47.60] 48.661 [1,236.00] 2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 3.748 [95.20] 2.311 [58.70] 48.661 [1,236.00] 2⅞ EU 8RD
40 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 10,000-psi maximum working pressure ■ 2⅞ EU 8RD and 3½ EU 8RD
tubing connections ■ Easy opening and closing operation ■ No wireline equipment required
for operation ■ Low maintenance cost
DescriptionThe Model CSM circulating sleeve allows complete circulation. The Model CSM is easily operated by applying tension to open and compressive force for its closing. The circulation sleeve can be opened or closed repeatedly as required and allows an unrestricted flow passage when in the open position. The Model CSM allows total transmission of the torque when packers must be operated. Applications include equalization and circulation over packers that are designed to allow pulling.
Operation ModeApply downward force on the tool to shear pins according to the shearing table. Rotate the tubing ⅛ turn clockwise (right) at desired tool depth, while maintaining a slight torque, and lift the tubing slowly until tension is acquired again. Tool is completely open to allow full circulation.
To close the tool, apply downward force and rotate the tubing ⅛ turn counterclockwise (left). Lift the tubing slowly until tubing is again under tension.
Model CSM Circulating SleeveCirculating Sleeve with Mechanical Opening: Product Number 418
Model CSM circulating sleeve with mechanical opening.
41Sliding Sleeves
Model CSM Circulation Sleeve
ØA
ØB
C
Specifications
Profile in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
2⅞ [73.00 ] 4.331 [110.00] 2.44 [62.00] 24.724 [628.00] 2⅞ EU 8RD
3½ [88.90] 5.354 [136.00] 2.992 [76.00] 35.118 [892.00] 3½ EU 8RD
42 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 10,000-psi maximum working
differential pressure ■ Opening valve with fishing point ■ Heat-treated alloy steel construction ■ Anti-corrosive coating as epoxy or nickel
plating when required ■ Low maintenance cost
DescriptionThe Model CSH hydraulic opening circulation sleeve is designed to be used in wells when communication between the tubing and the annulus is required for normal well circulation. The Model CSH sleeve’s hydraulic opening mechanism is not affected by the differential pressure applied to the tubing, when the opening valve has not been introduced.
Operation of the Model CSH is simple. The valve has rated shearing pins that, once cut by direct differential pressure, allow free circulation inside the tubing.
Operation ModeWhen opening is required, fill the tubing (to avoid an abrupt impact of the ball on the sliding sleeve valve seat), then drop the valve. Taking this into account, obtain ±10% of the shearing pins value, according to the rated shearing table.
Once the check valve has seated, pressurize the tubing to achieve the necessary pressure to shear the pins and open the sleeve, thereby allowing communication to the annulus.
Note: If the tubing cannot be filled, the shearing value of the pin will be inaccurate and will need to be taken into account. The fatigue of the shearing pins produced by the high impact on the tool is changed when the well has no fluid level.
Model CSH Hydraulic Opening Circulation SleeveHydraulic Opening Circulation Sleeve: Product Number 418
Model CSH hydraulic opening circulation sleeve.
43Sliding Sleeves
Model CSH Hydraulic Opening Circulation Sleeve
ØAØB
C
Specifications
Profile in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
2⅞ [73.00] 3.858 [98.00] 2.122 [53.90] 24.566 [624.00] 2⅞ EU 8RD
44 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
Model RR Nipple with “No-Go” ProfileNipple with “No-Go” Profile: Product Number 653
Model RR nipple with “no-go” profile.
ØA
ØB
C
Specifications
Tool Profile, in [mm]
Tool ID, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
1.812 [46.02]3.063 [77.80] 1.811 [46.00] 11.024 [280.00] 2⅜ EU 8RD
3.669 [93.20] 1.811 [46.00] 11.890 [302.00] 2⅞ EU 8RD
1.875 [47.63] 3.063 [77.80] 1.874 [47.60] 11.024 [280.00] 2⅜ EU 8RD
2.250 [57.15] 3.748 [95.20] 2.248 [57.10] 12.244 [311.00] 2⅞ EU 8RD
2.312 [58.73] 3.748 [95.20] 2.311 [58.70] 12.244 [311.00] 2⅞ EU 8RD
2.750 [69.85] 4.500 [114.30] 2.752 [69.90] 13.386 [340.00] 3½ EU 8RD
2.812 [71.43] 4.500 [114.30] 2.811 [71.40] 13.386 [340.00] 3½ EU 8RD
45Nipples
Model RF-Nipple with Selective ProfileNipple with Selective Profile: Product Number 654
ØA
ØB
C
Specifications
Tool Profile, in [mm]
Tool ID, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
1.812 [46.00] 3.063 [77.80] 1.811 [46.00] 12.008 [305.00] 2⅜ EU 8RD
1.875 [47.10]3.063 [77.80] 1.874 [47.60] 12.008 [305.00] 2⅞ EU 8RD
3.669 [93.20] 1.874 [47.60] 12.008 [305.00] 2⅜ EU 8RD
2.250 [57.20] 3.748 [95.20] 2.248 [57.10] 14.016 [356.00] 2⅞ EU 8RD
2.312 [58.70] 3.748 [95.20] 2.311 [58.70] 14.016 [356.00] 2⅞EU 8RD
2.750 [69.90] 4.500 [114.30] 2.750 [69.90] 12.992 [330.00] 3½ EU 8RD
2.812 [71.40] 4.500 [114.30] 2.811 [71.40] 13.465 [342.00] 3½ EU 8RDModel RF nipple with selective profile.
46 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURE ■ 2⅜ EU 8RD, 2⅞ EU 8RD, and 3½ EU 8RD
tubing connections ■ No maintenance required ■ Plug or ball optional
DescriptionThe Model SH shear out plug is deployed to make a hydraulic set installation hermetic. The plug is placed under the lowest packer. After ejection of the plug, the body remains as an entrance guide for slickline.
Operation ModeRun the tool with pins rated according to setting program.
Model SH Shear Out PlugShear Out Plug: Product Number 659
ØA
ØB
C
Specifications
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
3.063 [77.8] 2.008 [51.00] 5.433 [138.00] 2⅜ EU 8RD
3.669 [93.20] 2.402 [61.00] 5.827 [148.00 ] 2⅞ EU 8RD
4.500 [114.3] 2.992 [76.00] 6.299 [160.00] 3½ EU 8RD
Model SH shear out plug.
47Shear Out Plugs
FEATURES ■ Costless maintenance ■ It can be combined with other accessories ■ It is manufactured with materials of
different quality ■ Threads (at special request)
DescriptionThis multiple sub “NRR” model presents a profile in which you can place a bottom no-go plug, in case you may require to plug the sub, after the shear out plug has been released.
Model NRR Shear Out Plug with Profile Shear Out Plug with Profile: Product Number 657
ØA
ØB
C
NRR Shear Out Plug with Profile Specifications (Product Number 657)
Tool Profile, in [mm]
Tool ID, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
1.812 [46.02] 3.063 [77.80] 1.811 [46.00] 12.598 [320.00] 2⅜ EUE
2.250 [57.20] 3.669 [93.20] 2.248 [57.10] 13.976 [355.00] 2⅞ EUE
NRR shear out plug with profile
48 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
FEATURES ■ 150,000-lbf maximum overpull ■ Operated by applying pressure to
the annulus ■ 61-mm wide passage ■ Not required while pumping ■ Cleans and allows recovery of solids
at the surface ■ Low maintenance cost
DescriptionThe Model VDR dynamic valve with cup packer is designed for multiple purposes. In mechanical pumping wells, the valve allows the circulation and clearing of the tubing of paraffin incrustations and carbonates by adding a simple cup packer under the valve. The Model VDR is also employed as a bypass valve for the oil-associated gas. In these instances, a tandem packer is placed above the valve.
Operation ModeThe valve is placed in the production string just below the point where the paraffin becomes solid due to a lower temperature. When loss of production is observed, circulate the well through the annulus while applying more than 300-psi differential pressure, thus opening the sub and communicating the annulus with the tubing, to accomplish cleaning.
Model VDRC Dynamic Valve with Cup PackerDynamic Valve with Cup Packer: Product Number 701
Model VDRC dynamic valve with cup packer.
49Dynamic Valve
Model VDRC Dynamic Valve with Cup Packer
ØA
ØB
C
ØD
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Packer OD, in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70]13.00–15.50 [19.34–23.06] 4.949 [125.70] 5.043 [128.10] 5.091 [129.30] 4.921 [125.00] 2.402 [61.00] 46.772 [1,188.00] 2⅞ EU 8RD
15.50–17.00 [23.06–25.06] 4.890 [124.20] 4.949 [125.70] 5.024 [127.60] 4.921 [125.00] 2.402 [61.00] 46.772 [1,188.00] 2⅞ EU 8RD
7 [177.80]17.00–23.00 [25.29–34.22] 6.366 [161.70] 6.535 [166.00] 6.520 [165.60] 5.984 [152.00] 2.402 [61.00] 45.079 [1,145.00] 2⅞ EU 8RD
26.00–29.00 [38.64–43.15] 6.185 [157.10] 6.276 [159.40] 6.315 [160.40] 5.984 [152.00] 2.402 [61.00] 45.079 [1,145.00] 2⅞ EU 8RD
50 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 2⅜ EU 8RD, 2⅞ EU 8RD, and 3½ EU 8RD
tubing connections ■ Increased pumping efficiency through
friction reduction ■ Double mechanical grip ■ Higher rotation friction: friction pads ■ Emergency release (shearing-rated pins) ■ Low maintenance cost
DescriptionThe Model AR-1 tension mechanical anchor is a robust and reliable in applications where it its necessary to secure the string to the casing while using mechanical pumping. Pumping efficiency is increased by means of decreasing the friction caused by the movement of rod inside a not properly aligned tubing string. The Model AR-1 anchor can be set in compression, tension, or neutral.
Setting OperationWith the tool at depth, rotate from 6 to 8 turns counterclockwise (left) at tool level and apply compressive force or tension according to procedure. Be aware of the rate at which the emergency release shearing pins were set.
Releasing OperationSet the string to the neutral point and pull between 1,000 and 1,500 lbf, then rotate from 6 to 8 turns counterclockwise (left) at tool depth. In case of using the emergency release option, pull over the tubing weight as rated for the shearing pins
Model AR-1 Tension Mechanical AnchorTension Mechanical Anchor: Product Number 750
Product AR-1 tension mechanical anchor.
51Anchors
Model AR-1 Tension Mechanical Anchor
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
4½ [114.30] N/A 3.921 [99.60] 4.091 [103.90] 3.740 [95.00] 2.008 [51.00] 27.598 [701.00] 2⅜ EU 8RD
5 [127.00] N/A 4.276 [108.60] 4.559 [115.80] 4.000 [101.60] 2.008 [51.00] 27.598 [701.00] 2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.500 [114.30] 2.402 [61.00] 28.957 [735.50] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.402 [61.00] 30.787 [782.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.992 [76.00] 30.984 [787.00] 3½ EU 8RD
52 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 2⅞ EU 8RD and 3½ EU 8RD
tubing connections ■ Special slips with cams ■ Slip spring blades ■ Larger slips areas ■ Higher grip ■ Low maintenance cost
DescriptionThe Model AR-2 torque anchor is robust, reliable, and has applications where it is necessary to secure the string to the casing while using electrical (ESP) pumping, increasing efficiency by providing a secure anchor to the casing. When the rotor starts its rotation, the torque applied to the tubing string is transferred to the casing walls.
Operation ModeWith the tool at depth, rotate with a pipe wrench (on the surface) clockwise (right), then release suddenly to verify the anchor is working properly. The friction against the friction pads on the casing force the springs and activates the slips.
Releasing OperationStart pulling out the tubing while checking the tension.
Model AR-2 Torque AnchorTorque Anchor: Product Number 752
Model AR-2 torque anchor.
53Anchors
Model AR-2 Torque Anchor
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.500 [114.30] 2.402 [61.00 ] 15.197 [386.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.402 [61.00] 17.165 [436.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.992 [76.00] 17.165 [436.00] 3½ EU 8RD
54 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 2⅜ EU 8RD, 2⅞ EU 8RD, and 3½ EU 8RD
tubing connections ■ Hydraulically set ■ Double mechanical grip ■ Friction pads for higher rotation friction ■ Emergency release (shearing rated pins) ■ Low maintenance cost
DescriptionThe Model AR-3 DL hydraulic tension anchor was specifically designed for special wells (dogleg, deviation, etc.). It is necessary to secure the string to the casing when using mechanical pumping, thus increasing its efficiency. The packer can be set in compression, tension, or neutral.
Setting OperationWith the tool at depth and the installation plugged at the bottom, apply pressure to shear the pins (previously set). Then, apply tension according to tubing movement procedure. Be aware of the shearing pins rate for the emergency release option.
Releasing OperationSet the string to the neutral point and pull between 1,000 and 1,500 lbf. Rotate 6 to 8 turns counterclockwise (left) at tool depth. In order to use the emergency release system, pull over the tubing weight according to the shearing pins rate.
Model AR-3 DL Hydraulic Tension AnchorHydraulic Tension Anchor: Product Number 756
Model AR-3 DL hydraulic tension anchor.
55Anchors
Model AR-3 DL Tension Hydraulic Anchor
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.500 [114.30] 2.402 [61.00] 33.228 [844.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.402 [61.00] 38.937 [989.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.992 [76.00] 38.937 [989.00] 3½ EU 8RD
56 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 45,000-lbf maximum working tension ■ Hydraulically set ■ Hydraulic circulation sub ■ Wide diameter setting range ■ Low working pressures ■ Big circulation hole diameters
DescriptionThe Model AR-4 openhole hydraulic anchor was designed to support tensions while holding up anchored epoxy-reinforced-fiberglass casing to the openhole well, when affected by differential pressures producing upward forces that exceed its weight. The Model AR-4 anchor was developed specifically to cement and repair wells with epoxy reinforced fiberglass casing.
Setting OperationAfter positioning the anchor at the desired depth, apply a 10,000-lbf compressive force, then apply tension and bleed off pressure. While in tension, apply pressure to activate the circulation sub.
Model AR-4 Open Hole Hydraulic AnchorOpen Hole Hydraulic Anchor: Product Number 755
Model AR-4 openhole hydraulic anchor.
57Anchors
Model AR-4 Open Hole Hydraulic Anchor
ØA
ØB
C
Specifications
Openhole Diameter, in [mm]
Openhole Weight, lbm/ft [kg/m]
Openhole ID, Min., in [mm]
Openhole ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
8⅛–13 [206.4–330.2] N/A – – 6.051 [153.70] 2.402 [61.00] 41.043 [1,042.50] 3½ EU 8RD
58 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ Increases pumping efficiency ■ Keeps operation costs down with
low maintenance requirements ■ Can be set manually or by clockwise rotation ■ Parts interchange with other manufacturers
DescriptionThe Model ATC “Catcher” tubing anchor is demployed to keep the production string in tension and hold certain tubing parts that could fall into the well. The anchor is primarily used in mechanical pumping systems when it is necessary to maintain the tubing in tension.
Setting OperationOnce at the desired depth, rotate the tubing counterclockwise (left) 5 to 8 turns until slips are in contact with the casing.
Maintaining the torque, apply alternative loads to the tubing (less than the tools working value). Release the torque and continue applying alternative loads to eliminate residual torques.
Apply the necessary tension to the tubing as recommended by the calculations performed previously, plus the appropriate additional tension as a safety margin.
To release, apply a small amount of compression to the tubing and rotate 5 to 8 turns clockwise (right). Should it become necessary, it is possible to release the anchor without compression or even having it in tension. To ensure that the tool is completely released, pull the tubing a couple of feet and rotate clockwise (right) again.
Model ATC “Catcher” Model Tubing Anchor“Catcher” Model Tubing Anchor: Product Number 438
Model ATC “catcher” model tubing anchor.
59Anchors
Model ATC “Catcher” Model Tubing Anchor
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70] 13.00–23.00 [19.34–34.22] 4.670 [118.60] 5.044 [128.10] 4.500 [117.80] 2.440 [62.00] 34.212 [869.00] 2⅞ EU 8RD
7 [177.80]17.00–20.00 [25.29–29.76] 6.403 [162.60] 7.125 [181.00] 6.250 [158.70] 2.440 [62.00] 40.472 [1,028.00] 2⅞ EU 8RD
20.00–38.00 [29.76–56.54] 5.675 [144.10] 6.456 [164.00] 5.500 [139.70] 2.440 [62.00] 40.472 [1,028.00] 2⅞ EU 8RD
9⅝ [244.48] 32.30–47.00 [48.06–69.93] 8.681 [220.50] 9.001 [228.60] 8.000 [203.20] 2.402 [61.00] 37.322 [948.00] 3½ EU 8RD
60 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 2⅞-in EU 8RD connections ■ Rotation not required for setting ■ Long-working-life slips
DescriptionThe NRA278 non-rotating tubing anchor is installed as part of the tubing string, to set it fix to the casing. Its main application is in wells where it is not possible to set the conventional anchors by means of tubing rotation due to heating pipes inside the well.
The NRA278 anchor can be reset with no need of repairing it.
The NRA278 anchor presents API 2⅞ EU 8RD connections, in box-up and pin-down configuration.
The slips are manufactured with treated materials to achieve high external hardness and great internal tensile.
Setting OperationThe NRA278 anchor is operated by means of upward and downward movements in the tubing. The tool setting is carried out by tensioning the tubing.
It is released by applying tension that exceeds the one rated to shear the ring.
Non-Rotating Tubing AnchorNRA278 Non-Rotating Tubing Anchor: Product Number 438
Model ATN non-rotating tubing anchor.
61Anchors
Model ATN Non-Rotating Tubing Anchor
Øa
Øb
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
7 [177.80]17.00–20.00 [25.29–29.76] 6.403 [62.60] 7.125 [181.00] 6.250 [158.70] 2.440 [62.00] 35.433 [900.00] 2⅞-in EU 8RD
20.00–38.00 [29.76–56.54] 5.675 [144.10] 6.456 [164.00] 5.500 [139.70] 2.440 [62.00] 35.433 [900.00] 2⅞-in EU 8RD
62 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants ■ Hydraulic Circulation
Model DCH-1 Hydraulic Circulation SubHydraulic Circluation Sub: Product Number 969
Model DCH-1 hydraulic circulation sub.
ØA
ØB
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70] N/A 4.276 [108.60]
4.559 [115.80]
4.488 [114.00]
1.921 [48.80]
22.519 [572.00]
2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60]
5.043 [128.10]
4.685 [119.00]
2.307 [58.60]
22.204 [564.00]
2⅞ EU 8RD
7 [177.80] N/A – – 5.500 [139.70]
2.992 [76.00]
19.429 [493.50]
3½ EU 8RD
Open well 8⅛–13 [206.37–330.2]
N/A – – 6.051 [153.70]
2.402 [61.00]
41.043 [1,042.50]
5½ Centron Box × 3½ EU 8RD Pin
63Drillable Plugs
MAIN FEATURES ■ 10,000-psi maximum working pressure ■ Hydraulic-mechanical setting ■ Packing element with back up rings ■ Plug is drillable
DescriptionThe Model RHM drillable plug is a compact, cost-effective, hydraulic-mechanical setting plug. Designed to isolate critical areas, the plug can be run together with a testing packer and it can be tested.
Setting OperationRun the model “RHM” plug to the required depth, throw the ball to pressurize it and set the upper slip. Pull 20,000 lbf over the string weight to pack and set the lower slips.
Model RHM Drillable PlugDrillable Plug: Product Number 801
ØA
C
RHM Drillable Plug Specifications (Product Number 801)
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Connection
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.232 [107.50] 24.213 [615.00] 2⅞ EUE
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.598 [142.20] 28.504 [724.00] 2⅞ EUE
RHM drillable plug.
64 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ Wireline set ■ Drillable ■ Cast iron construction ■ One sliding part ■ Can be set in most grades of casing
(including P110) ■ Proper metallic protection of the rubber
to avoid its stretching ■ For temporary or permanent services ■ Reliable ring supporting setting strength ■ Small OD allows quick and safe running
DescriptionThe Model RN drillable plug is a proven reliable product. It presents excellent operating features (reliable settings). The plug can be set by different types of F-10 and F-20 wireline setting tools. The Model RN plug is designed for quick setting and to sustain high temperatures and pressures.
Model RN Drillable PlugWire Setting Drillable Plug
Model RN wireline-set drillable plug.
65Drillable Plugs
Model RN Drillable Plug Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Part Number Tool OD, in [mm]
Setting Range, Min., in [mm]
Setting Range, Max., in [mm]
4½ 9.50–16.60 000.3500.002 3.500 3.826 4.090
4½ 9.50–13.50 000.3710.002 3.780 3.920 4.560
5 11.50–21.00 000.3710.002 3.780 3.920 4.560
5½ 13.00–25.00 000.4240.002 4.250 4.580 5.047
5¾ 22.50–25.20 000.4240.002 4.250 4.580 5.047
6 14.00–26.00 000.4750.002 4.750 5.140 5.595
6⅝ 34.00 000.4750.002 4.750 5.140 5.595
6 10.50–12.00 000.5340.002 5.340 5.595 6.366
6⅝ 17.00–34.00 000.5340.002 5.340 5.595 6.366
7 23.00–40.00 000.5340.002 5.340 5.595 6.366
6⅝ 17.00–22.00 000.5610.002 5.620 5.989 6.655
7 17.00–35.00 000.6090.002 5.620 5.989 6.655
7⅝ 20.00–39.00 000.6960.002 6.090 6.625 7.263
8⅝ 24.00–49.00 000.7710.002 6.960 7.511 8.248
9⅝ 29.30–53.50 000.8710.002 7.710 8.435 9.063
10¾ 54.00–81.00 000.9500.002 8.710 9.250 9.784
10¾ 32.70–51.00 000.9500.002 9.500 9.850 11.150
11¾ 38.00–60.00 000.9500.002 9.500 9.850 11.150
13⅜ 48.00–72.00 000.1200.0002 12.000 12.347 12.715
66 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ Wireline Set ■ Drillable ■ Cast iron construction ■ One sliding part ■ Can be set in most grades of casing
(including P110) ■ Proper metallic protection of the rubber
to avoid its stretching ■ For temporary or permanent services ■ It contains lock rings that support
the setting force ■ Small OD allows quick and safe running
DescriptionThe Model RK cement retainer is designed for squeeze cementing operations. It has a surface-controlled valve when setting weight in the string to open it and lifting it to close it (by means of the stinger located in the lowest part of the string).
To test the tool, the stinger must be position inside the flapper valve, between the seal rings. The valve closes automatically when the stinger is retrieved.
The Model RK retainer is part of a Wireline setting kit. Adapters are necessary to set by tubing. The retainer can sustain high pressures and temperatures.
Model RK Cement RetainerCement Retainer for Wireline and Tubing Set
Model RK cement retainer.
67Cement Retainer
Model RK Cement Retainer Cement Retainer SpecificationsCasing Size, in
Casing Weight, lbm/ft
Retainer Part Number, Tool OD Max., in
Setting Range, Min., in
Setting Range, Max., in
4½ 9.50–16.60 005.3593.002 3.500 3.826 4.090
5 11.50–18.00 005.3937.002 3.780 4.154 4.560
5½ 13.00–23.00 005.4312.002 4.250 4.580 5.044
6 10.50–12.00 005.5375.002 5.340 5.595 6.135
6⅝ 17.00–34.00 005.5375.002 5.340 5.595 6.135
732.00–38.00 005.5375.002 5.340 5.595 6.135
17.00–35.00 005.6587.002 5.620 6.004 6.538
7⅝ 20.00–39.00 005.6312.002 6.090 6.625 7.263
8⅝ 24.00–49.00 005.7125.002 6.960 7.511 8.248
9⅝ 29.30–53.50 005.8125.002 7.710 8.435 9.063
10¾54.00–81.00 005.9437.002 8.710 9.250 9.660
32.70–51.00 005.9000.002 9.500 9.660 10.192
13⅜77.00–102.00 005.1156.002 11.563 11.633 12.464
48.00–72.00 005.1200.002 12.000 12.175 12.715
Cement Retainer with Sliding Valve Specifications Differential Pressure, psi
Maximum Temperature, degF
4½-in up to 7⅝-in casing (3.50–6.09 mod. A) (3.593–6.312 mod.B) 10,000 325
8⅝-in up to 9⅝-in casing (3.96–7.71 mod.A) (7.125–8125 mod.B) 8,000 300
10¾-in up to 11¾-in casing (8.71–9.50 mod.A) (9.000–9437 mod.B) 5,000 300
13⅜-in up to casing (11.56–12.00 mod.A) (11.562–12.000 mod.B) 3,000 300
68 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
Blank CoverProduct Number 851
Specifications
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
3.063 [77.80] – [–] 2.953 [75.00] 23⁄8 EU 8RD
3.669 [93.20] – [–] 3.346 [85.00] 27⁄8 EU 8RD
4.500 [114.30] – [–] 3.937 [100.00] 31⁄2 EU 8RD
ØA
C
Blank cover.
69Accessories
Entry GuideProduct Number 852
Specifications
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
2.866 [72.80] 2.008 [51.00] 3.937 [100.00] 23⁄8 EU 8RD
3.669 [93.20] 2.402 [61.00] 4.528 [115.00] 27⁄8 EU 8RD
ØA
C
Entry guide.
70 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
1⁄2 Mule ShoeProduct Number 854
Specifications
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
3.063 [77.80] 2.008 [51.00] 6.299 [160.00] 23⁄8 EU 8RD
3.669 [93.20] 2.402 [61.00] 7.087 [180.00] 27⁄8 EU 8RD
3.669 [93.20] 2.283 [58.00] 7.087 [180.00] 27⁄8 EU 8RD
4.500 [114.30] 2.992 [76.00] 7.874 [200.00] 31⁄2 EU 8RD
ØA
ØB
C
1⁄2 mule shoe.
71Accessories
Blank PlugProduct Number 855
Blank Plug Specifications (Product Number 855)
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
2.374 [60.30] – [–] 3.937 [100.00] 2 EUE
2.594 [65.90] – [–] 4.331 [110.00] 23⁄8 EUE
3.094 [78.60] – [–] 4.724 [120.00] 27⁄8 EUE
3.750 [95.30] – [–] 5.118 [130.00] 31⁄2 EUE
ØA
C
72 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
Tubing and casing X-Overs (crossovers) are available in most types of ordinary API thread combinations, according to API Std-5B standard specifications (EU 8RD, NU, LP, etc).
Crossovers are constructed of SAE 4140 steel and stainless steel according to customer specifications.
Tubing and Casing X-OversProduct Number 404
ØB
C
C
ØBØA
ØAØB
C
ØA
Tubing and casing X-overs
73Accessories
Tubing and Casing X-Overs Specifications
Part Number Max. OD, in [mm]
Min. OD, in [mm]
Tool ID., in [mm]
L, in [mm]
L1, in [mm]
Connection
R, in R1, in
850-121-1011 2.374 [60.30] 2.595 [65.90] 1.850 [47.00] 7.874 [200.00] 2.165 [55.00] 2⅜ EU 8RD Pin 2-in LP 1 Pin
850-121-1221 2.598 [66.00] 3.095 [78.60] 2.008 [51.00] 7.874 [200.00] 2.362 [60.00] 2⅜ EU 8RD Pin 2⅞ EU 8RD Pin
850-321-1121 2.598 [66.00] 3.748 [95.20] 2.008 [51.00] 9.843 [250.00] 2.165 [55.00] 2⅜ EU 8RD Pin 3½ EU 8RD Pin
850-121-1132 2.598 [66.00] 3.095 [78.60] 2.00 [50.80] 6.299 [160.00] 2.362 [60.00] 2⅜ EU 8RD Pin 2⅜ NU Box
850-121-1222-1 2.595 [65.90] 3.669 [93.20] 2.000 [50.80] 7.087 [180.00] 2.362 [60.00] 2 ⅜ EU 8RD Pin 2⅞ EU 8RD Pin
850-121-1222-2 2.595 [65.90] 3.669 [93.20] 2.000 [50.80] 11.811 [300.00] 2.362 [60.00] 2 ⅜ EU 8RD Pin 2⅞ EU 8RD Pin
850-221-1011-1 2.374 [60.30] 3.095 [78.60] 1.850 [47.00] 7.874 [200.00] 2.165 [55.00] 2⅞ EU 8RD Box 2-in LP Pin
850-221-1011-2 2.374 [60.30] 3.095 [78.60] 1.850 [47.00] 7.874 [200.00] 2.165 [55.00] 2⅞ EU 8RD Box 2-in LP Pin
850-221-1321 3.095 [78.60] 4.500 [114.30] 2.402 [61.00] 9.843 [250.00] 2.362 [60.00] 2⅞ EU 8RD Pin 3½ EU 8RD Box
850-121-1221 3.095 [78.60] 3.095 [78.60] 2.008 [51.00] 7.087 [180.00] N/A 2⅞ EU 8RD Pin 2⅜ EU 8RD Box
850-221-1322 3.095 [78.60] 4.500 [114.30] 2.402 [61.00] 9.843 [250.00] 2.362 [60.00] 2⅞ EU 8RD Pin 3½ EU 8RD Box
850-321-1011 2.374 [60.30] 3.748 [95.20] 1.850 [47.00] 8.858 [225.00] 2.165 [55.00] 3½ EU 8RD Pin 2-in LP Pin
850-122-1122 3.748 [95.20] 3.063 [77.8] 2.008 [51.00] 10.236 [260.00] 3.543 [90.00] 3½ EU 8RD Pin 2⅞ EU 8RD Box
850-222-1321 3.752 [95.30] 3.752 [95.30] 2.402 [61.00] 7.874 [200.00] N/A 3½ EU 8RD Pin 2⅞ EU 8RD Box
850-741-1011-1 2.374 [60.30] 5.500 [139.70] 1.850 [47.00] 15.512 [394.00] 2.165 [55.00] 5½ Csg. L Pin 2-in LP Pin
850-741-1221-1 3.095 [78.60] 5.500 [139.70] 2.402 [61.00] 11.811 [300.00] 2.756 [70.00] 5½ Csg. L Pin 2-in LP Pin
850-741-1221-2 3.095 [78.60] 5.500 [139.70] 2.441 [62.00] 10.000 [254.00] 2.756 [70.00] 5½ Csg. L Pin 2⅞ EU 8RD Pin
850-941-1741-1 5.500 [139.70] 7.000 [177.80] 5.012 [127.30] 11.811 [300.00] 3.937 [100.00] 5½ Csg. L Pin 7 Csg. L Pin
850-741-1942-1 5.500 [139.70] 7.658 [194.50] 4.882 [124.00] 16.142 [410.00] 4.331 [110.00] 5½ Csg. L Pin 7 Csg. L Pin
850-941-1011-1 2.374 [60.30] 7.000 [177.80] 1.850 [47.00] 17.976 [456.60] 2.165 [55.00] 7 Csg. L Box 2-in LP Pin
850-1141-1941-1 7.000 [177.80] 9.626 [244.50] 6.366 [161.70] 21.299 [541.00] 4.724 [120.00] 7 Csg. L Pin 9⅝ Csg. L Pin
850-1141-1941-2 7.000 [177.80] 9.626 [244.50] 6.366 [161.70] 21.299 [641.00] 4.724 [120.00] 7 Csg. L Pin 9⅝ Csg. L Pin
850-122-1232 3.095 [78.60] 3.500 [88.90] 2.008 [51.00] 11.811 [300.00] 2.953 [75.00] 2⅜ EU 8RD Box 2⅞ NU Box
850-322-1222 3.669 [93.20] 4.500 [114.30] 2.402 [61.00] 9.843 [250.00] 3.228 [82.00] 2⅞ EU 8RD Box 3½ EU 8RD Box
74 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ Holds annular pressure ■ No maintenance required
DescriptionThe Model RZF float shoe is employed as a retaining valve and as a landing collar for the displacement plug when cementing casing or tubing.
Model RZF Float ShoeFloat Shoe: Product Number 953
Model RZF float shoe.
ØA
ØB
C
Specifications
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
3.669 [93.20] 1.890 [48.00] 13.976 [355.00] 2⅞ EU 8RD
75Accessories
MAIN FEATURES ■ 6,000 psi maximum working pressure
in AISI 316L ■ 2⅜-in and 2⅞-in EU 8RD tubing connections ■ No maintenance required
DescriptionThis product is used as a sacrificial joint in production and injection installations, under or between the packers used in the system.
Model RPJ Pup-JointPup-Joint: Product Number 956
RPJ pup-joint
ØA
ØB
C
PHT Hydraulic Packer Released by Tension Specifications (Product Number 514)
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min.,in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
– N/A -- – 3.091 [78.50] 1.937 [49.20] 57.913 [1,471.00] 2⅜ EUE
– N/A – – 3.669 [93.20] 2.465 [62.60] 58.661 [1,490.00] 2⅞ EUE
– N/A – – 4.500 [114.30] 3.067 [77.90] 57.283 [1,455.00] 3½ EUE
76 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
DescriptionThe Models KP and MP lateral outlet mandrels are designed out of an oval cross-section of a pipe, and can incorporate SAE 4130 low steel alloy or AISI 316L stainless steel into their construction. The mandrel ends are integrally forged and end in an excentric rounded cross-section. This excentric ends allow to place the threaded connections, having the same flowing area as of the one as of the tubing. The ends present an API EU 8 RD box-up and box-down threads configuration.
The sizes are: ∅ 2⅜ in, ∅ 2⅞ in and ∅ 3½. These type of mandrels have a lateral output pocket that can place many types of regulating valves as for example, flow valves for water injection, gas lifting, blanks, etc. The pockets are made of SAE steel and 4130 steel. The one piece tubular pocket is welded to the mandrel by qualified operators and procedures.
The packing seal diameter complies with the dimensions and external polish required by the API 11V1 std. The pocket presents a ledge in its entry which allows the use of valves with an integral or upper latch.
Model KP and MP Lateral Outlet MandrelLateral Outlet Mandrel: Product Number 412
Model KP and MP Lateral Output Mandrels For ∅ 1-In And ∅ 1¼-in Valve Specifications
Part number KPS 238 KPN 238 KPB 238 KPI 238 KPS 278 KPN 278 KPB 278
Internal testing pressure, psi 7,500 7,500 6,000 3,500 7,500 7,500 6,000
External testing pressure, psi 5,000 5,000 5,000 3,000 5,000 5,000 5,000
Traction set, lbf/Ton 209,660 [95.1]
209,660 [95.1]
209,660 [95.1]
95,900 [43.5]
341,270 [154.8]
341,270 [154.8]
341,270 [154.8]
Type of thread API EU 8RD 2⅜ in API EU 8RD 2⅞ in
Configuration Box up × box down Box up × box down
Body material SAE 4130 SAE 4130 SAE 4130 AISI 316L SAE 4130 SAE 4130 SAE 4130
Pocket material SAE 4130 SAE 4130 AISI 316L AISI 316L SAE 4130 SAE 4130 AISI 316L
Type of service Normal Corrosive† Normal Corrosive Normal Corrosive‡ Normal † Internal-External “Electroless Nickel” coating that complies with ASTM B 733 standard. Coating thickness: 50 microns. ‡ Traction set based on the mandrel critical area, without internal and/or external pressures and at ambient temperature. This value does not include the type of thread.
Models KP and MP lateral output mandrels.
77Lateral Output Mandrels
Model KP and MP Lateral Outlet Mandrel
Model KP and MP Lateral Outlet Mandrel Size Specifications
Dimensions Mandrels for 1—1¼-in valves
Mandrels for 1½-in valves
2⅜ 2⅞ 2⅜ 2⅞ 3½
Max., OD (A), in [mm] 4.250 [108.00] 4.826 [122.60] 4.810 [122.20] 4.826 [122.60] 5.956 [151.30]
Interal ID (B), in [mm] 1.901 [48.30] 2.472 [62.80] 1.901 [48.30] 1.901 [48.30] 2.875 [73.00]
Tool Length (C), in [mm] 73.228 [1,860.00] 70.080 [1,780.00] 104.490 [2,654.00] 104.720 [2,660.00] 98.820 [2,510.00]
Pocket length (D), in [mm] 40.120 [1,019.00] 35.560 [903.30] 67.050 [1,703.00] 58.130 [1,476.60] 53.130 [1,349.50]
Min. OD (E), in [mm] 3.063 [77.80] 3.670 [93.20] 3.063 [77.80] 3.670 [93.20] 4.400 [111.80]
Tubing size (F), in [mm] 2.905 [73.80] 4.000 [101.60] 4.000 [101.60] 4.000 [101.60] 5.000 [127.00]
B
A
F
E
C
D
E
KP and MP Lateral Outlet Mandrels For 1½ Valve Specifications
Part number MPN 238 MPN 238 MPR 278 MPS 350
Internal testing pressure, psi 7,500 7,500 7,500 7,500
Internal testing pressure, psi 5,000 5,000 5,000 3,000
Traction set lbf/ton 209,660 [95.1] 209,660 [95.1] 341,270 [154.8] –
Type of thread diameter, in API EU 8RD 2⅜ API EU 8RD 2⅜ API EU 8RD 2⅞ API EU 8RD 3½
Configurations Box up × box down Box up × box down Box up × box down Box up × box down
Body material SAE 4130 SAE 4130 SAE 4130 SAE 4130
Pocket material SAE 4130 SAE 4130 SAE 4130 SAE 4130
Type of service Normal Corrosive (1) Normal Normal
78 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
DescriptionThe Model FRS flow retrievable control valve is constructed from AISI 316 stainless steel.The valve’s regulating system is automatic and is made up of a piston, a hole (interchangeable), a spring, and a seat. Depending on the service, the seat can be provided in tungsten carbide and the piston rod with an insert of the same material in its end. The critical pieces are thermically treated or entirely made of K-Monel®.
The seal elements provided are made of a Kevlar® and Neoprene™ compounds that assure better performance than rubber and fabric ones. They operate under the same principle as the retrievable flow regulators available in the market, and can be installed in 1- or 1½-in pocket mandrel diameters of any manufacturer.
A retaining system can be provided to avoid the backflow from the formation to the tubing. The standard model comes with a spring that allows rates up to 170 m3/day; it can be replaced by one for higher rates in order to obtain a maximum of 240 m3/day.
An anti-lock system can be provided for high differential pressure wells. The ∅1¼-in regulating valves have a lower integral latch (nose) and the flow gets in through the upper part (head). The ∅1½-in retaining valves present a latch in the upper part (head) and the flow gets in through the lower part (nose).
Model FRS Flow Retrievable Control ValveFlow Retrievable Control Valve: Product Number 414
Model FRS flow retrievable control valve.
79Flow Retrievable Control Valves
Model FRS Flow Retrievable Control Valve
B E
D
CA
B
D
Part Number Type Of Valve Features Ø Nominal, in [mm]
Max. Flow,m3/day–STD
Max. Flow,m3/day–High Rate
DMS 100 Dummy – 1 [25.40] – –
FRS 125 Regulator Standard 1 [25.40] 170 240
FRR 125 Regulator Retainer 1 [25.40] 170 200
FRT 125 Regulator Tungsten 1 [25.40] 170 200
FRB 125 Regulator Retainer and antilock 1 [25.40] 170 200
DMS 150 Dummy – 1½ [38.10] – –
FRI 150 Regulator Retainer and antilock 1½ [38.10] 200 200
FRD 150 Regulator Double regulation system 1½ [38.10] 370 370
∅ Nominal in. mm
Tool OD A, in [mm]
Tool OD B, in [mm]
Tool OD C, in [mm]
Tool Length, in [mm]
Tool ID, in [mm]
∅1 [25.40] 1.240 [31.5] 1.035 [26.30] 1.035 [26.30] 22.677 [576.00] 0.875 [22.20]
∅1½ [38.10] 1.500 [38.10] 1.563 [39.70] 1.500 [38.10] 21.862 [555.30] –
80 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
DescriptionThe Model FSS surface flow control valve installs directly into the injection pipe and employs an automatic flow-regulating system. Different flow rates through the Model FSS surface flow control valve are determined by interchanging the orifices, allowing accurate adjustment of the flow by means of a simple operation.
The Model FSS valve allows injection flow regulation on the surface, without constant adjustments of the valves. In this way, operation costs are reduced.
Model FSS Surface Flow Control ValveSurface Flow Control Valve: Product Number 414
Model FSS surface flow control valve..
MAIN FEATURES ■ 2-in NPT flanged pin-pin connections ■ Installs directly into the injection pipe ■ Automatic flow-regulating system ■ AISI 304 and AISI 316L steel construction
(Critical pieces are made of AISI 420 thermically-treated steel)
■ Regulation range from 50–390 m3/day ■ Series 600 and Series 900 threaded
connections available upon request
81Surface Flow Retaining Valve
Model FSS Surface Flow Control Valve
A
C
Specifications
Tool Profile,in [mm]
Tool OD,in [mm]
B in [mm]
Tool Length,in [mm]
Connection
2.000 [50.80] 2.375 [60.5] – 8.228 [209] 2-in NPT
82 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ 10,000 psi maximum working pressure ■ Parking element with back up ring ■ Electric or hydraulic setting ■ Retrievable plug ■ Low maintenance cost ■ Service tool
DescriptionThe Model WRTP-1 retrievable service plug is a tool with electric- and hydraulic-setting systems and allows isolation of critical zones. The plug can be run with wireline or tubing.
Setting Operation
Electric System:With the corresponding adapter kit, thread it to the electrical setting tool.
Hydraulic System:Run the Model WRTP-1 with the hydraulic setting tool to the required depth. Throw the ball and pressurize the string to set hydraulically.
Releasing OperationRun the fishing tool, set 5,000 lbf compressive force on top of the plug to open the equalization sleeve and unlatch the releasing retention system. Pull 4,000 to 5,000 lbf to release the plug.
Model WRTP-1 Retrievable Service PlugRetrievable Service Plug: Product Number 800
Model WRTP-1 retrievable service plug.
83Service Tools
Model WRTP-1 Retrievable Service Plug
ØA
C
Specifications
Casing Size, in [mm]
Casing Weight, lbm/ft [kg/m]
Casing ID, Min., in [mm]
Casing ID, Max., in [mm]
Tool OD, in [mm]
Tool ID, in [mm]
Tool Length, in [mm]
Connection
5½ [139.70]
13.00–17.00 [19.34–25.06] 4.892 [124.20] 5.044 [128.10] 4.744 ]120.50] – 40.315 [1,024.00] 2⅜ EU 8RD
20.00 [29.76] 4.778 [121.40] 4.892 [124.20] 4.638 [117.80] – 40.315 [1,024.00] 2⅜ EU 8RD
23.00 [34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] – 40.315 [1,024.00] 2⅜ EU 8RD
7 [177.80]
17.00–20.00 [25.29–29.76] 6.456 [164.00] 6.538 [166.00] 6.268 [159.20] – 50.000 [1,281.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] – 50.000 [1,281.00] 2⅞ EU 8RD
29.00 [43.15] 6.184 [157.10] 6.276 [159.40] 5.969 [151.60] – 50.000 [1,281.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.184 [157.10] 5.811 [147.60] – 50.000 [1,281.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.92 [150.40] 6.004 [152.50] 5.657 [143.70] – 50.000 [1,281.00] 2⅞ EU 8RD
84 Packers and Completions Equipment Catalog—Argentina Manufacturing Plants
MAIN FEATURES ■ Recovers sand from perforations
and cavity areas. ■ Can used as part of a final well
production system ■ SAE 4140 steel construction (internal parts
can be constructed of tungsten carbide) ■ The combination between nozzle and throat
is defined according to the production rate and the available facilities on surface (pressure and rate).
■ The pump ejector is placed in the inside of the body. It is recommended to operate it with the slickline equipment not only to insert it, but also to retrieve it.
■ Pump ejector can also be placed inside an CMD sleeve or a modified KPS side-pocket mandrel.
Model JP278 Jet PumpJet Pump
DescriptionThe Model JP278 jet pump is run in the tubing string above the packer and can be used as a final installation in a well production system. The jet pump’s design allow an operator to run a variety of tools through it.
Applications for the Model JP278 jet pump include recovery of surface acid after a stimulation job, recovery of frac-pumped fluids, well testing, cleaning plugged or damaged zones, and for periodic cleaning of injection wells.
85Service Tools
Direct flow injection
Injected and production flowback
Flow injected by tubing
Jet pump body
Pump ejector
Packer
Perforations
Annular flowback
13-CO-0098
Argentina Manufacturing PlantsNeuquén, ArgentinaPhone: 54-2994-440905/0906/0909Villa Regina, ArgentinaPhone: 54-2984-464060/1198
top related