packaged solution for boosting water solution for boosting water ... if you require assistance to...
Post on 02-Apr-2018
220 Views
Preview:
TRANSCRIPT
PACKAGED SOLUTION FOR BOOSTING WATERPOWERTANK Range by Pedrollo Distribution
The
› Need to boost your water pressure?
There are many reasons for experiencing low water pressure problems including high demand, location and shared supply. The Powertank range is a self-contained cold water booster set specifically designed for use in domestic and light commercial applications where existing water pressure and flow is insufficient to meet demand. The range caters for multiple space and storage capacity requirements.
› Why do I need a tank and a pump?
To increase water flow there must first be more water. If your mains supply is not meeting your requirements, then you need a break tank to store your own water supply ready for when you need it. This can then be pumped to your outlets on demand giving you a plentiful supply of water at the right pressure.
› Why can’t I just fit a pump onto the mains?
Water Authority bylaws prevent a pump being directly connected to the mains supply, so when your mains water pressure needs a boost, a break tank must be incorporated into the system. There is an exemption for pumps ‘up to’ 12 ltr/min but this is not guaranteed and relies on your mains being capable of delivering this volume. To put this into context, a single shower typically requires between 9-15 ltr/min.
› Will it be noisy?
All pumps create noise, but by incorporating an ultra-quiet running submersible pump within a tank unit, this means that the Powertank range is about as quiet as you can get. Typical dB of <65dB(A)
› Is it easy to install?
Our all-in-one tank and pump unit is designed to remove the headache for your installer. It is a packaged unit and therefore is fast and easy to install. See our Installation Guideline for step by step instructions.
› Where am I going to put it?
The Powertank range has been designed to provide the end user with a variety of options in terms of water storage and usage requirements as well as availability of space. Typical installation areas include garages, plant rooms, utility rooms and kitchens.
› What is the difference between the fixed speed and the variable speed version?
The fixed speed version has an adjustable pump controller that ensures you always have a minimum set pressure to your outlets. As demand increases the pressure will reduce as this is a characteristic of a fixed speed unit.
The variable speed version has an intelligent pump controller that will supply a smooth flow of water to every outlet by maintaining a constant pressure throughout your property, speeding up and slowing down the pump to suit demand. This ensures efficient operation of the pump leading to reduced energy consumption.
› What size property will this supply?
The Powertank range is scalable and additional capacity can be added for large properties or those with particularly poor incoming flow rates. We have designed the range to fit in all domestic and commercial properties (incoming flow rate and required usage must be taken into consideration). If you have a weak incoming water supply yet a high demand for water, you also have the option to link a slave tank to ensure you have enough stored water to meet demand.
› What if my tank runs out of water?
The controller will turn off the pump if there is no water in the tank. It will automatically reset after a short delay allowing the water volume in the tank to recover. This pump protection feature ensures a long and happy life for the pump.
› Volumes
All stated volumes are useable water volumes.
POWERTANK
Increased Water Pressure & Flow
Compact Design
Quiet & Reliable
Ease of Installation
Dry Run Protection
2
Applications Include: Domestic, Commercial, Agricultural & Industrial
If you require assistance to select the right system for your use please email us at sales@pedrollo.co.uk or call 01543 415200
Marked Product
Powertank Compact: 125ltr
3
Key Features • Non-corrosive holding tank (WRAS approved material)• Pre-fitted WRAS approved fill valve • Integral overflow weir• Minimal installation required• Adjustable digital display flow controller • Dry run protection with auto restart (time delay)
System Connections
125ltr Compact
Model
125ltr Compact Fixed Speed
125ltr Compact Variable Speed
125ltr Compact Fixed Speed Auto Tech
Range Options
Connection Size
Inlet ½” BSP
Outlet 1” BSP
Overflow 1 ½”
Drain Off 1” BSP
IF IN DOUBT ASK DO NOT SCALE OFF THIS DRAWING
Title:
Client:
Scale:
Drawn By:
Drawing No.:
0 1 2 3
Checked By: Date:
This drawing is protected by copyright and must not bereproduced in any form without the prior written consent of E.P.S. Pumping & Treatment Systems.COPYRIGHT
1st Angle Projection
Quartertown Industrial Estate,Mallow, Co. Cork.Phone: 022-31200Fax: 022-31250Email: contracts@epsireland.com
COST CODE:
NO REQUIRED:
MATERIAL:
FINISH:
Ballyhaunis, Co. Mayo.Ph.: 094-9630226Fax: 094-9630761
Mountrath,Co. Laois.Ph.: 0502-32279Fax: 0502-32518
FOR HANDRAIL DETAILS SEE EPS DRAWING;EPS/A-L/HANDRAILING/RAILFAB.
ALL ITEMS TO BE TAGGED WITH EPS TAG STATING;EPS, DRAWING No, PURCHASE ORDER No.
REMOVE ALL SHARP EDGES AND BURRS
1.
3.
2.
NOTES
**
**N.T.S. Sheet 1 of 1
(Plot A3 @ 1:1)
00/00/00
763
490
850
623
1
43
560
767
IF IN DOUBT ASK DO NOT SCALE OFF THIS DRAWING
Title:
Client:
Scale:
Drawn By:
Drawing No.:
0 1 2 3
Checked By: Date:
This drawing is protected by copyright and must not bereproduced in any form without the prior written consent of E.P.S. Pumping & Treatment Systems.COPYRIGHT
1st Angle Projection
Quartertown Industrial Estate,Mallow, Co. Cork.Phone: 022-31200Fax: 022-31250Email: contracts@epsireland.com
COST CODE:
NO REQUIRED:
MATERIAL:
FINISH:
Ballyhaunis, Co. Mayo.Ph.: 094-9630226Fax: 094-9630761
Mountrath,Co. Laois.Ph.: 0502-32279Fax: 0502-32518
FOR HANDRAIL DETAILS SEE EPS DRAWING;EPS/A-L/HANDRAILING/RAILFAB.
ALL ITEMS TO BE TAGGED WITH EPS TAG STATING;EPS, DRAWING No, PURCHASE ORDER No.
REMOVE ALL SHARP EDGES AND BURRS
1.
3.
2.
NOTES
**
**N.T.S. Sheet 1 of 1
(Plot A3 @ 1:1)
00/00/00
763
490
850
623
1
43
560
767
490mm 560mm
763mm850mm
623mm
143mm
767mm
Pump OptionPower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Fixed Speed 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Variable Speed 0.55 0.75 H Metres 48 46 44.5 42.8 40.5 37.5 33.5 29 23
Fixed Speed Option Variable Speed Option
Power supply 240 volt, 50Hz 240 volt, 50Hz
Controller Presflo 1.5 supplied with 2ltr pressure vessel Steadypres MT07 supplied with 2ltr pressure vessel
Current Input 3.4 amp 3 amp
Mains Power Cable 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug
Tank Weight Empty 27 kg 33 kg
Tank Weight Full 1ltr = 1 kg plus weight of empty tank 1ltr = 1 kg plus weight of empty tank
Access Cover Ø 190mm 168mm
POWERTANKCompact
The Powertank Compact has been specifically designed for smaller properties with low water pressure and flow and where space is at a premium i.e. apartments, cottages, townhouses. Fitting into the space of a standard kitchen unit, the Powertank Compact is a similar size to a washing machine so can be hidden away behind a cupboard door. The electronic controller automatically starts and stops the pump when a drop in pressure is sensed i.e. a tap is opened and closed.
Please note that we have a policy of continuous product development and specifications may change from those shown
4
Connection Size
Inlet ½” BSP
Outlet 1” BSP
Overflow 1" BSP
Drain Off 1” BSP
Model
200ltr Slimline Fixed Speed
200ltr Slimline Variable Speed
300ltr Slimline Fixed Speed
300ltr Slimline Variable Speed
Key Features
• Non-corrosive holding tank (WRAS approved material)• Pre-fitted WRAS approved fill valve• Protective lid enclosure as standard• Minimal installation requirement• Adjustable digital display flow controller • Dry run protection with auto restart (time delay)
Range Options
System Connections
Powertank Slimline: 200ltr & 300ltr
200ltr Slimline 300ltr Slimline
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STBL00200V-300 -MULTIBOOST FINISHED
SW
25/08/2015 1 1
1190
870
584
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STBL00300V-300 -MULTIBOOST FINISHED
Cal McCarthy
26/08/2015 1 1
1580
1260
584584mm
584mm
1190mm
1580mm
1260mm
870mm
Fixed Speed Option Variable Speed Option
Power supply 240 volt, 50Hz 240 volt, 50Hz
Controller Presflo Multi with integral 3 litre pressure vessel Steadypres M/T 07 c/w 8ltr pressure vessel
Current Input 3.4 amp 4 amp
Mains Power Cable 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug
Tank Weight Empty 200ltr = 26kg 300ltr = 29kg 200ltr = 32kg 300ltr = 35kg
Tank Weight Full 1ltr = 1 kg plus weight of empty tank 1ltr = 1 kg plus weight of empty tank
Access Cover Ø 285mm 285mm
Pump OptionPower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Fixed Speed 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Variable Speed 0.75 1 H Metres 63 61 59 57 54 50 45 39 31
POWERTANKSlimline
Please note that we have a policy of continuous product development and specifications may change from those shown
The Powertank Slimline range can fit through a standard doorway. This makes it very convenient for new or existing properties as it can be easily fitted under a stairs, in a garage, or in a utility room. The slimline range is ideal for 3 - 5 bedroom houses, with poor water pressure and flow and where floor space is limited. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed.
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX00750V - PRODUCT -EPS
CARBERY PLASTICSLTD
SW
26/08/2015 1 1
2113
1753
760
5
Powertank Utility: 500ltr, 750ltr
Key Features
• Non-corrosive holding tank (WRAS approved material)• Pre-fitted WRAS approved fill valve• Protective lid enclosure as standard• Minimal installation requirement• Adjustable digital display flow controller • Dry run protection with auto restart (time delay)
System Connections
500ltr Utility
Model
500ltr Utility Fixed Speed
500ltr Utility Variable Speed
750ltr Utility Fixed Speed
750ltr Utility Variable Speed
Range Options
Connection Size
Inlet ½” BSP
Outlet 1” BSP
Overflow 1" BSP
Drain Off 1” BSP
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX00450V - PRODUCTASSEMBLY
CARBERY PLASTICS
SW R2.1
26/08/2015 1 1
PT
1393
1033
760
750ltr Utility
760mm760mm
1033mm
1393mm
1753mm
2113mm
Fixed Speed Option Variable Speed Option
Power supply 240 volt, 50Hz 240 volt, 50Hz
Controller Presflo Multi with integral 3 litre pressure vessel Steadypres M/T 07 c/w 8ltr pressure vessel
Current Input 3.4 amp 4 amp
Mains Power Cable 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug
Tank Weight Empty 500ltr = 34kg 750ltr = 49kg 500ltr = 40kg 750ltr = 55kg
Tank Weight Full 1ltr = 1 kg plus weight of empty tank 1ltr = 1 kg plus weight of empty tank
Access Cover Ø 285mm 285mm
POWERTANKUtility
Please note that we have a policy of continuous product development and specifications may change from those shown
The Powertank Utility pumping range is designed for domestic and light commercial use where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Utility range is designed for areas where the floor space is not restricted. This range caters for a wider variation of tank options to suit a wider range of applications.
Pump OptionPower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Fixed Speed 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Variable Speed 0.75 1 H Metres 63 61 59 57 54 50 45 39 31
Fixed Speed Option Variable Speed Option
Power supply 240 volt, 50Hz 240 volt, 50Hz
Controller Presflo Multi with integral 3 litre pressure vessel Steadypres M/T 07 c/w 8ltr pressure vessel
Current Input 3.4 amp 4 amp
Mains Power Cable 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug
Tank Weight Empty 650ltr = 54kg 1000ltr = 74kg 650ltr = 60kg 1000ltr = 80kg
Tank Weight Full 1ltr = 1 kg plus weight of empty tank 1ltr = 1 kg plus weight of empty tank
Access Cover Ø 285mm 285mm
POWERTANK Utility
Key Features
• Non-corrosive holding tank (WRAS approved material)• Pre-fitted WRAS approved fill valve• Minimal installation requirement• Adjustable digital display flow controller • Dry run protection with auto restart (time delay)
System Connections
1000ltr Utility
Model
650ltr Utility Fxed Speed
650ltr Utility Variable Speed
1000ltr Utility Fixed Speed
1000ltr Utility Variable Speed
Range Options
Connection Size
Inlet ½” BSP
Outlet 1” BSP
Overflow 1" BSP
Drain Off 1” BSP
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX01000R-XXX - Product- 285mm Lid
Carbery Plastics
SW
26/08/2015 1 1
Tanks
1688
563
1444 1407
Powertank Utility: 650ltr & 1000ltr
1
1
2
2
3
3
4
4
5
5
6
6
AA
BB
CC
DD
EE
FF
Designer
DrawingRevision
Drawing NumberSheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STBL00650R - TL190 +Controller
EPS Water
SW R1.011
650R - EPS
DrawingDateRevision DescriptionApproved
R1.004-04-2016650L - EPSCMC
XXXXX-XX-XXXXXXXX
XXXXX-XX-XXXXXXXX
1083
1083
669
6
The Powertank Utility pumping range is designed for commercial use on a larger scale where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Utility range is designed for areas where the floor space is not restricted. This range caters for a wider variation of tank options to suit a wider range of applications.
Please note that we have a policy of continuous product development and specifications may change from those shown
650ltr Utility
563mm
1688mm
1444mm
1083mm
669mm 1083mm
Pump OptionPower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Fixed Speed 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Variable Speed 0.75 1 H Metres 63 61 59 57 54 50 45 39 31
Fixed Speed Option Variable Speed Option
Power supply 240 volt, 50Hz 240 volt, 50Hz
Controller Presflo Multi with integral 3 litre pressure vessel Steadypres M/T 07 c/w 8ltr pressure vessel
Current Input 3.4 amp 4 amp
Mains Power Cable 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug
Tank Weight Empty 250ltr = 49kg 650ltr = 94kg 250ltr =55kg 650ltr = 100kg
Tank Weight Full 1ltr = 1 kg plus weight of empty tank 1ltr = 1 kg plus weight of empty tank
Access Cover Ø Internal 190mm, External 285mm Internal 190mm, External 285mm
Model*
250ltr Bunded Fixed Speed
250ltr Bunded Variable Speed
650ltr Bunded Fixed Speed
650ltr Bunded Variable Speed
Range Options
Key Features
• Non-corrosive holding tank (WRAS approved material)• Pre-fitted WRAS approved fill valve• Protective lid enclosure as standard• Minimal installation requirement• Built-in electronic start/stop• Dry run protection with auto restart (time delay)
Connection Size
Inlet ½” BSP
Outlet 1” BSP
Overflow 1"BSP
Drain Off 1” BSP
System Connections
250ltr Bunded
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
BTBLXX00250VCARBERY PLASTICS
LTD
SW
31/08/2015 1 1
760
1478
1136
760mm
1136mm
1478mm
7
Powertank Bunded: 250ltr & 650ltr
The Powertank Bunded pumping range is designed for commercial use where there is low mains water pressure and where pressure fluctuates. Every Powertank Bunded tank benefits from a ‘tank within a tank’ bunded construction, with the outer tank able to maintain a minimum of 110% of the volume of the inner tank. The inner tank acts as the primary storage container, whilst the outer tank acts as a fail safe in the event of a spill.
It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Bunded range is designed for areas where the floor space is not restricted.
POWERTANK Bunded
Please note that we have a policy of continuous product development and specifications may change from those shown
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer
DrawingRevision
Drawing Number Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
BTBL00650R - TL190 +Controller
EPS Water
SWR1.0 1 1
650 Bund
DrawingDate Revision Description Approved
R1.0 04-04-2016 650L Bund CMC
X XXXX-XX-XX XXXX XX
X XXXX-XX-XX XXXX XX
1174
752
1200
650ltr Bunded
752mm
1174mm
1200mm
Pump OptionPower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Fixed Speed 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
Variable Speed 0.75 1 H Metres 63 61 59 57 54 50 45 39 31
Model
270ltr Rectangular Fixed Speed Auto Tech
Range Options
Key Features
Connection Size
Inlet ½” BSP
Outlet 1” BSP
Overflow 1" BSP
Drain Off 1” BSP
System Connections
Powertank Rectangular: 270ltr
Fixed Speed Option
Power supply 240 volt, 50Hz
Controller Presflo Multi with integral 3 litre pressure vessel
Current Input 3.4 amp
Mains Power Cable 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug
Tank Weight Empty 32kg
Tank Weight Full 1ltr = 1 kg plus weight of empty tank
Access Cover Ø 190mm
Pump OptionPower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Fixed Speed 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
8
POWERTANK Rectangular
The Powertank Rectangular range is designed for houses and apartments where there is low mains water pressure and where pressure fluctuates. The Powertank Rectangular 270ltr tank is designed for areas where height restrictions and access are an issue.
The Top Multi 2 Auto is a submersible pump equipped with electronic features for starting and stopping the pump as the tap is turned on and off. In the event of pump running dry it automatically tries to resume normal service at intervals of increasing time (15, 30, 60 minutes / max 24 hours). After approximately 30 minutes of repeated stopping and starting at intervals of less than 2 minutes from each other the device will stop the pump. After a rest period of 30 minutes the pump will automatically resume normal activity.
Please note that we have a policy of continuous product development and specifications may change from those shown
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale
1 : 12
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
AT058E - EPS + 190 LIDEPS
SW R1.0
01-03-2016 1 1
Water
01-03-2016
432 456
1571
475475mm
1571mm
456mm432mm
• Non-corrosive holding tank (WRAS approved material)• Protective lid enclosure as standard • Minimal installation requirement• Built-in electronic start/stop• After long periods of pump inactivity the electronic device starts the pump
every 48 hours for 10 seconds• Dry run protection with auto restart (time delay)• Start-up pressure 1.5 bar
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
710660
665
1045
Key Features • Non-corrosive holding tank (WRAS approved material)• Pre-fitted WRAS approved fill valve• Minimal installation requirement• Adjustable digital display flow controller • Dry run protection with auto restart (time delay)
System Connections
500ltr Rectangular
Model
300ltr Rectangular Fixed Speed
500ltr Rectangular Fixed Speed
Range Options
Connection Size
Inlet ½” BSP
Outlet 1” BSP
Overflow 1" BSP
Drain Off 1” BSP
Powertank Rectangular: 300 & 500ltr
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
500L Rectangular TankCarbery Plastics
SW R4.0
26/08/2015 1 1
Tanks
650
7271190
1117
80
720
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
500L Rectangular TankCarbery Plastics
SW R4.0
26/08/2015 1 1
Tanks
650
7271190
1117
80
720
Fixed Speed Option
Power supply 240 volt, 50Hz
Controller Presflo Multi with integral 3 litre pressure vessel
Current Input 3.4 amp
Mains Power Cable 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug
Tank Weight Empty 300ltr = 34kg 500ltr = 39kg
Tank Weight Full 1ltr = 1 kg plus weight of empty tank
Access Cover Ø 285mm
Pump OptionPower
Q I/min 0 10 20 30 40 50 60 70 80kW HP
Fixed Speed 0.55 0.75 H Metres 42 40 38 34 30 24 18 11.5 5
9
POWERTANK Rectangular
The Powertank Rectangular pumping range is designed for domestic and light commercial use where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Rectangular range is designed for areas where the floor space is not restricted but where height restrictions are an issue.
Please note that we have a policy of continuous product development and specifications may change from those shown
300ltr Rectangular
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
710660
665
10451045mm
665mm
710mm800mm
1190mm
727mm
10
Powertank CAT 5: 10ltr
Please note that we have a policy of continuous product development and specifications may change from those shown
Key Features
• Non-corrosive holding tank • Pre-fitted WRAS approved fill valve• Integral screened overflow weir• Minimal installation requirement• Adjustable digital display flow controller • Dry run protection with auto restart (time delay)• Self Priming Jet Pump• CAT 5
Model
10ltr CAT 5 Fixed Speed
Range Options
Connection Size
Inlet ¾” BSP
Outlet 1” BSP
Overflow 40mm Wastepipe
System Connections
Fixed Speed Option
Power supply 240 volt, 50Hz
Pump JCRm1C-N
Controller Presflo
Current Input 3.4 amp
Mains Power Cable 2 mtr x 1mm2 3 core fitted with 5 amp fuse main plug
Tank Weight Empty 14 kg
Tank Weight Full 1ltr = 1 kg plus weight of empty tank
Access Cover Ø N/A
Pump OptionPower
Q I/min 0 5 10 20 25 30 40 45 50 60kW HP
JCRm1C-N 0.37 0.5 H Metres 35 32 28.5 23.5 21 18.5 15 13.5 12 10
300mm 500mm
670mm
670mm
320mm
CAT 5
POWERTANK CAT 5
The Powertank CAT 5 provides backflow protection for fluid category 5 risks. Our system includes a type AB airgap and has a water volume of 10 ltrs. We supply this tank with a self priming jet pump to ensure smooth operation. The electronic controller automatically starts and stops the pump when a drop in pressure is sensed i.e a tap is opened and closed.
Top Multi II• Flow rate up to 80ltr/min• Head pressure up to 4.2 bar• Max liquid temperature 40oC• Power consumption 0.55kW
Presflo Multi • LCD display unit• Adjustable cut-in feature • 3ltr surge tank• Dry running protection with auto restart• Resin bonded electronics
Presflo• LCD display unit• 1.5 bar cut-in pressure• Dry running protection with auto restart• Resin bonded electronics
Top Multi-Tech (Auto)• Flow rate up to 80ltr/min• Head pressure up to 4.2 bar• Built-in electronic start/stop • Dry running protection• Power consumption 0.55kW
NKM 2/3 - N Pump• Flow rate up to 80ltr/min• Head pressure up to 4.6 bar• Power consumption 0.55kW
Steady Pres• LCD display unit• Energy efficient • Dry running protection • Excessively frequent starts• Overcurrent protection
Pressure Wave • Stainless steel nipple 1”• 10 bar working pressure• Wras approved product
Wall Bracket Support for Pressure Vessel• Adjustable arm length • 1” connection
Slave Tanks
The Powertank is a single pump booster set for cold water storage with capacity options ranging from 125ltr to 1000ltr. By simply adding an additional 'slave' tank, water storage capacity can be increased.
Model
125ltr tank only
Compact
Model
200ltr tank only
300ltr tank only
Slimline
Model
500ltr tank only
650ltr tank only
750ltr tank only
1000ltr tank only
Utility
Model
270ltr tank only
300ltr tank only
500ltr tank only
Rectangular
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
500L Rectangular TankCarbery Plastics
SW R4.0
26/08/2015 1 1
Tanks
650
7271190
1117
80
720
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STBL00300V-300 -MULTIBOOST FINISHED
Cal McCarthy
26/08/2015 1 1
1580
1260
584
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX00450V - PRODUCTASSEMBLY
CARBERY PLASTICS
SW R2.1
26/08/2015 1 1
PT
1393
1033
760
11
IF IN DOUBT ASK DO NOT SCALE OFF THIS DRAWING
Title:
Client:
Scale:
Drawn By:
Drawing No.:
0 1 2 3
Checked By: Date:
This drawing is protected by copyright and must not bereproduced in any form without the prior written consent of E.P.S. Pumping & Treatment Systems.COPYRIGHT
1st Angle Projection
Quartertown Industrial Estate,Mallow, Co. Cork.Phone: 022-31200Fax: 022-31250Email: contracts@epsireland.com
COST CODE:
NO REQUIRED:
MATERIAL:
FINISH:
Ballyhaunis, Co. Mayo.Ph.: 094-9630226Fax: 094-9630761
Mountrath,Co. Laois.Ph.: 0502-32279Fax: 0502-32518
FOR HANDRAIL DETAILS SEE EPS DRAWING;EPS/A-L/HANDRAILING/RAILFAB.
ALL ITEMS TO BE TAGGED WITH EPS TAG STATING;EPS, DRAWING No, PURCHASE ORDER No.
REMOVE ALL SHARP EDGES AND BURRS
1.
3.
2.
NOTES
**
**N.T.S. Sheet 1 of 1
(Plot A3 @ 1:1)
00/00/00
763
490
850
623
1
43
560
767
UV Filtration• Flow rate up to 70ltr/min at 30mJ/cm2• Ultra violet disinfection • Includes 5 micron pre-filtration• 1" Connections• 60 WATT
Conversion Kit for Compact Model• 1m flexible inlet hose, 15mm Aquavend, Speedfit
connection• 600mm flixible outlet hose, 22mm Aquavend,
Speedfit connection• HEPVO 40mm CVI self sealing trap with CV3 adaptor
McAlpine Flexcon 2 450mm flexible waste pipe 90º elbow 40mm, 100mm x 40mm waste pipe
POWERTANK Components
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
F F
Designer Rev. No:
Date Rev. Date: Sheet
/
Carbery Plastics Ltd.Clonakilty Enterprise Park, Clonakilty, Co. Cork. Tel: 00353 (0)23 8833531
Title
Project
company
Scale FromDrawing
© Carbery Plastics Ltd. All Use, Exhibition or Copying of Drawing Expressly Forbidden unless Authorised by Carbery
Plastics Ltd.
STXX01000R-XXX - Product- 285mm Lid
Carbery Plastics
SW
26/08/2015 1 1
Tanks
1688
563
1444 1407
NKM 2/4 - N Pump• Flow rate up to 80ltr/min• Head pressure up to 6 bar• Power consumption 0.75kW
Slimline Drip Tray• Suitable for 200/300ltr Slimline range• 1" overflow connection• Lift handles
Please note that we have a policy of continuous product development and specifications may change from those shown
www.powertank.co.ukt: 01543 415200 e: sales@pedrollo.co.uk
Ref 01/06/16
› House Boosting for Unvented Systems (Where you already have a Tank)Our range of single pump and controllers can be fitted in any unvented system where you may already have a cold water tank, or you would like to source your own.
› House Boosting for Gravity Fed Systems (Vented)Our range of twin pumps and controllers can be fitted onto the hot and cold feeds to ensure equal pressure throughout your household.
› Shower Boosting for Gravity Fed Systems (Vented)Sometimes there is just that one shower that is causing you problems and boosting the whole house seems like a lot of unnecessary effort. We offer a range of shower pumps to suit any situation – even those showers in the loft space.
› House Boosting for Unvented Systems with Good Pressure and Low FlowOur accumulators are a low cost option for properties with good pressure but low flow. These fill up with pressurised water from the mains when demand is low which provides a reserve of water when you need it.
› Bespoke Solutions – Built to OrderIf our standard offerings don’t meet your requirements we have a comprehensive range of pumps, tanks and controls which can be combined to suit your specific application.
Other Products in the House Boosting RangeHere at Pedrollo Distribution we know that everybody’s house is different and the Powertank may not always be the correct option. We have a range of house boosting products that ensure we have a solution whatever your situation.
top related