p2 p2 living for the future year 10 gcse physics

P2P2Living

for the Future

Year 10 GCSE Physics

LESSON 1 – Solar Power

P2

LEARNING OUTCOMES:

• Describe some advantages and disadvantages of

using photocells to provide electricity:• Describe how a photocell works and what affects its power

EXPERIMENT:

P2

How does the area of a solar (photo) cell affect the voltage it produces?

CAN DO TASK (3):

P2

How does the distance of a light from a solar (photo) cell affect the voltage it produces?

Time = 20 minutes (results & analysis).

You must work on your own.

P2

LESSON 2 – Solar Heating & Wind PowerP2

LEARNING OUTCOMES:

Describe other ways that the Sun’s energy can be harnessed:

• how glass can be used to provide passive solar heating for buildings;

• light reflected to a focus by a curved mirror;

• transfer KE of air to electricity in wind

turbines.

P2

P2

LESSON 3 – AC & DC Generators

P2

LEARNING OUTCOMES:

Recognise the differences between DC and AC and illustrate them diagrammatically

Describe how simple generators work using the dynamo effect .

Electromagnetic Induction

If You push a magnet into a coil the electrons in the coil are also given a push. This makes an ‘induced voltage’

N

The ‘field lines’ have to be cut. No current is produced if the magnet is not moving!

Electromagnetic Induction

If You pull a magnet out of the coil the electrons in the coil are once again given a push. This makes an ‘induced voltage’ in the opposite direction

NNotice the

needle moves in

the opposite direction

How Can You Increase the Size of the Induced Current?

1.Move the Magnet Faster

2. Use a Stronger (not bigger!) Magnet

3. Put more Turns on the Coil

We can use a magnet, coil and movement to generate

electricity with this device

Will it make AC or DC Current?

This is a Generator

You will have heard them near road works generating the electricity to make the traffic lights and machines work

AC GeneratorInduced current can be

increased in 4 ways:

1)Increasing the speed of movement

2)Increasing the magnetic field strength

3)Increasing the number of turns on the coil

4)Increasing the area of the coil

Bikes often have Dynamos to make electricity to light a bulb

Dynamos are slightly different from

generators as they rotate the magnet

CAN DO TASK (3):• Use the oscilloscope to measure the frequency of the AC supply

• Time = 5 minutes (measurement & calculation).• You must work on your own.

LESSON 4 – Power stations & EfficiencyP2

LEARNING OUTCOMES:

Describe how the dynamo effect is used in conventional power stations to generate electricity:

• burning fuel • producing steam • spinning a turbine

• turbine turns generator.

Be able to use equations to calculate efficiency in a variety of situations.

Describe & recognise that there is significant

waste of energy in a conventional power station.

P2

LESSON 5 – Transformers

P2

LEARNING OUTCOMES:

Explain how transformers are used on the National grid to transmit electricity at high voltage to reduce energy waste/costs.

Explain how, for a given power, increased voltage reduces current. This will decrease energy waste by reducing heating of cables.

P2

LESSON 6 – Fuels & Power

P2

LEARNING OUTCOMES:

Describe that:

• burning fuels releases heat energy.

• uranium fuel rods release heat energy.

• fermenting biomass generates methane.

Calculate the power rating of an appliance:

power = voltage × current

P2

P2

LESSON 7 – Electricity Bills

P2

LEARNING OUTCOMES:

State that the unit of electrical supplied is the kilowatt hour;

Calculate number of kilowatt hours given:

• power in kilowatts;

• time in hours;

Calculate the cost of energy supplied.

LESSON 8 – Nuclear Power

P2

LEARNING OUTCOMES:

Be aware that ionising radiations (from radioactive waste) can cause cancer and that uranium is a non-renewable resource.

Realise that plutonium is a waste product from nuclear reactors and can be used to make nuclear bombs.

LESSON 9 – Radioactivity

P2

LEARNING OUTCOMES:

Recognise that some materials release nuclear radiation, and appreciate that there are 3 main types – Alpha, Beta and Gamma.

Be able to describe the properties and uses of Alpha, Beta, Gamma radiation.

Be aware that we are surrounded by several sources of background radiation.

P2

P2

LESSON 10 – Ionization & safety

P2

LEARNING OUTCOMES:

Be able to explain ionization in terms of electron behaviour.

Be aware of safety issues involving use of radioactive materials, including methods and hazards involved in disposal of waste products.

P2

LESSON 11 – Aurora & Magnetic Fields

P2

LEARNING OUTCOMES:

Recognise the shapes of magnetic fields around the Earth.

Be aware of the phenomena of Aurora and what causes them.

P2

MAGNETIC FIELD OF A COIL

P2

MAGNETIC FIELD OF THE EARTH

What is the SOLAR WIND?

The solar wind is a flow of electrically charged particles (protons and electrons) streaming out from the Sun’s corona. They travels at speeds of 400km/s to 850 km/s.

What are AURORA?

When the solar wind reaches the Earth, it interacts with our magnetic field. Changes in the solar wind cause changes the shape of the Earth’s magnetic field and electrons get accelerated towards the atmosphere above the N and S pole. They cause atoms in the air to emit erie glowing lightwaves.

P2

P2Click for Aurora movie:

Click to ‘hear’ Aurora:

Aurora Borealis TASK:

Make a poster describing what the aurora are and what causes them.

See p 200 of Gateway Science.

Include the following key points:•Cosmic rays – fast charged particles which create gamma rays•Deflected by magnetic field. Spiral in to poles•Excite atoms and make them glow•Gives off gamma rays when cosmic rays hit atoms.

LESSON 12 – Solar Flares & Magnetic Fields

P2

LEARNING OUTCOMES:

Know that magnetic fields can be generated by

moving electrical particles.

Appreciate that solar flares create problems on Earth, caused by charged particles interacting with the Earth’s magnetic field.

What are SOLAR FLARES?

When the solar wind reaches the Earth, it

P2

P2

P2

LESSON 13 – Earth & Moon

P2

LEARNING OUTCOMES:

Be aware of evidence for the formation of the Earth-Moon system.

Be able to compare objectively different ideas for how it occurred.

Understand the size and positions of common objects in space.

P2

LESSON 14 – Solar System

P2

LEARNING OUTCOMES:

Understand the size and positions of common objects in space.

Appreciate that objects moving in orbits require a centripetal force, provided by gravity

P2

P2

LESSON 15 – Space Missions

P2

LEARNING OUTCOMES:

Appreciate the problems involved in manned space missions and the advantages of using unmanned space probes.

State that unmanned spacecraft can send back information on:

• temperature, magnetic & radiation;

• gravity, atmosphere and surroundings.

P2

P2

LESSON 16 – Asteroids & Craters

P2

LEARNING OUTCOMES:

Know that a near-Earth object (NEO) is an asteroid or comet on a possible collision course

with Earth.

Work as part of a group to exchange & discuss ideas and present strategies to reduce the dangers posed by NES.

LESSON 17 – Comets & NEO

P2

LEARNING OUTCOMES:

Know that a near-Earth object (NEO) is an asteroid or comet on a possible collision course

with Earth.

Work as part of a group to exchange & discuss ideas and present strategies to reduce the dangers posed by NES.

P2

P2

Ideas to prevent NEO impacts:

• Gravitational tractor

• Missiles

• Early detection

• Attach engines?

LESSON 18 – Life Cycle of Stars

P2

LEARNING OUTCOMES:

Recognise that stars have life cycles and many of the early stages are common to all masses of stars.

Describe the end of a medium-weight star like our Sun:

• red giant • planetary nebula • white dwarf;

Describe the end of a heavy-weight star:

• red giant • supernova • neutron star or black hole.

P2

P2

P2

LESSON 19 – Big Bang Theory

P2

LEARNING OUTCOMES:

Be aware of the observations that the universe is expanding and understand how the Big Bang model accounts for this.

P2

LESSON 20 – TEST

P2